Related
Disclaimer: Flash this kernel at your own risk. I am not responsible for what you do on your device. Please remember to give credit where credit is due.
This is forked from simonsimons34 OC kernel, just with many more features added in.
Features:
-Under/Overclock from 120MHz to 806MHz
-Governors: lazy, smartass, smartassv2, interactiveX, interactive, conservative, ondemand, userspace, powersave, and performance.
-Speed tweaks
-Works with EXT2, EXT3, EXT4 filesystems
-Support Swap.
-Many other changes but I forget.
WARNINGS: 806MHz is only an option. If you choose to use it at that level for extended periods of time that is your fault.
Download
First kernel listed in Rom Manager
Thanks:
Adrynalyne: helped me a lot
simonsimons34: for source
Utkanos: helped me figure out how I kept breaking boot.img
Thanks going to try it.
Edit: running great full blast. No issues yet. Camera and video, WiFi, data, apps and market works great. Will keep testing ;-)
Marvel Custom
Thank you finally some more people are working on our phones thank you very much
Sent from my HTC_A510c using Tapatalk
Hey ive seen you forked it. Mind if i take a look at your config. I keep getting problems with wifi. Ive tried almost everything besides a new config file. Do plan to give credit. Im only using it for my wifi actually. Thanks for giving credit btw. Heads up if you left my source the same, 800mhz is over volted too. slots 1-3 undervolt 4-6 normal volt slot 7 (800) is overvloted
simonsimons34 said:
Hey ive seen you forked it. Mind if i take a look at your config. I keep getting problems with wifi. Ive tried almost everything besides a new config file. Do plan to give credit. Im only using it for my wifi actually. Thanks for giving credit btw. Heads up if you left my source the same, 800mhz is over volted too. slots 1-3 undervolt 4-6 normal volt slot 7 (800) is overvloted
Click to expand...
Click to collapse
I built your kernel as soon as I forked it. I had no issues with WiFi. You just have to use the modules from the kernel. I changed up the oc also. But that's why its there. For people to use.
Sent from my HTC_A510c using xda premium
okay thanks. Its strange i used the modules and it didnt work. I think it has to do with the .config im using i was messing with settings a while back. PS i found some iteresting things you can do in the boot.img you have on your flashable zip. PM me and i can send you a ramdisk to compare. Believe it or not usb tether is enabled at this lowest level
simonsimons34 said:
okay thanks. Its strange i used the modules and it didnt work. I think it has to do with the .config im using i was messing with settings a while back. PS i found some iteresting things you can do in the boot.img you have on your flashable zip. PM me and i can send you a ramdisk to compare. Believe it or not usb tether is enabled at this lowest level
Click to expand...
Click to collapse
I don't believe I changed anything in the config. Except to add my governors. Just check out my commits and you will see all the changes I made.
will do thanks
im installing this on simonsCM7 rom, it seems like its taking forever on the bootanimation screen. How long does it usually take to boot up after flashing this kernel? Its probably been about 5 mins so far.
djthebogan said:
im installing this on simonsCM7 rom, it seems like its taking forever on the bootanimation screen. How long does it usually take to boot up after flashing this kernel? Its probably been about 5 mins so far.
Click to expand...
Click to collapse
Yeah that is totally my fault. I should have mentioned this was a Sense kernel and not a AOSP kernel. You will need to flash the CM7 kernel again.
djthebogan said:
im installing this on simonsCM7 rom, it seems like its taking forever on the bootanimation screen. How long does it usually take to boot up after flashing this kernel? Its probably been about 5 mins so far.
Click to expand...
Click to collapse
I tried the same :/ it won't work but at least now we know its for sense
Sent from my HTC_A510c using Tapatalk
Haha, no worries. I was thinking that might be the case. What sense roms has this been tested and working on?
djthebogan said:
Haha, no worries. I was thinking that might be the case. What sense roms has this been tested and working on?
Click to expand...
Click to collapse
Mine which hasn't been released yet but it should work on any GB 2.1 or 3.0 sense rom
cool, I'm testing it with insink's euro port beta right now. Definitely feel a speed improvement right away, will post results after testing. Thanks to all involved in marvelc development
thanks! works great and good to see work on the a510c
cheers
would be great support for cm7
effry said:
would be great support for cm7
Click to expand...
Click to collapse
I agree, I was thinking the same thing
Sent from my HTC Wildfire S using xda premium
Is this voodoo sound capable ??? My frnd with a wildfire s needs a kernel with the same... he using marvelc rom...
sbnaul said:
Is this voodoo sound capable ??? My frnd with a wildfire s needs a kernel with the same... he using marvelc rom...
Click to expand...
Click to collapse
No it isn't. I thought that was a Samsung thing
Sent from my HTC_A510c using xda premium
Yeah I had that when I had the vibrant.
Marvel Custom
-------------------------------------------------------------------------------------------
Files and source:
www . der kernel . com
Flash the kernel designated for your rom, either CM9 or STOCK.
CM10....As CMX on the site (ignore it's under ics, cmx == cm10)
-------------------------------------------------------------------------------------------
Featuring:
Offering lowered voltages
Build optimizations
Performance through research
Removed wasteful debugging
Scheduler, Governor tweaks
Improved Colors (Fixed as of right now)
480MHz GPU
Up to 1836MHz or 1728 (as noted in filename)
Bull**** Free (Not pushing buzzwords to drop them later like others)
Morfic's in the Haus! Hell yah! Glad to have you here Morfic! Your kernels are the best! Still have my G2X because of you man.
Wow, thanks! Your work spreads everywhere!
Sent from my SGH-T999 using xda premium
Let me tell you, this is where it's at right here!
For those of you who don't know Morfic and his work, let me tell you, I completely vouch for it! I swore by it with my Galaxy Nexus and now that it's here, I'll do the same.
Nobody tops his kernels!
wait... is this kernel bull**** free?
Sent from my SGH-T999 using xda premium
LOL at the installation script ... "System successfully corrupted. Panic now"... Flashed ALPHA23 and running good!
Thanks.
Flashed Alpha 19 and all is well. Did a Quadrant just to play around and got a 5666 on first try @ 1.89.
True awesomeness.
This thing blazes on aokp with transitions on .5 with jelly bean transitions flashed its obscene!!!
Sent from my SGH-T999 using xda app-developers app
stonew5082 said:
wait... is this kernel bull**** free?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Just sniff it, roses man, roses.
es7241 said:
LOL at the installation script ... "System successfully corrupted. Panic now"... Flashed ALPHA23 and running good!
Thanks.
Click to expand...
Click to collapse
People even tried to copy that silly little line
babymatteo said:
Flashed Alpha 19 and all is well. Did a Quadrant just to play around and got a 5666 on first try @ 1.89.
True awesomeness.
Click to expand...
Click to collapse
1836 you mean?
hey awesome guy that everyone praise....how much voltage did you lower man?
Loved your kernels for the Sensation. Awesome.
G1_enthusiast said:
hey awesome guy that everyone praise....how much voltage did you lower man?
Click to expand...
Click to collapse
At this point pretty much only the low end, once i have this kernel at a more solid place i will push voltages overall further.
morfic said:
At this point pretty much only the low end, once i have this kernel at a more solid place i will push voltages overall further.
Click to expand...
Click to collapse
yeap i think i would speak for most when we say...battery life is more of a priority than speed, since this thing is fast and smooth out of the box.
Best kernel out I gave them all a good run but this one out shine them all.
Sent from my SGH-T999 using xda premium
there is one weird gov which i never seen...MSM-DVCS or something like that, can someone chime in.
G1_enthusiast said:
yeap i think i would speak for most when we say...battery life is more of a priority than speed, since this thing is fast and smooth out of the box.
Click to expand...
Click to collapse
My kernels are more about removing waste than adding stuff (Although i do grab features that are worth while, i am more referring to patches fixing issues noone knew they had, just to inflate git logs)
Things i do add is tweaks to cool overly Yellow panels.
And it's usually possible to benefit both ways, keep Max Freq low and grab all voltage drops and other savings, or raise it up and enjoy the extra power.
Morfic, would much rather see you over on the Sprint version, but glad to see you on the SGS III. Used to use your kernels on the Nexus S and they were the best around. Hopefully once you get everything settled in, we might see you branching to other carriers.
G1_enthusiast said:
there is one weird gov which i never seen...MSM-DVCS or something like that, can someone chime in.
Click to expand...
Click to collapse
This might a little..
http://forum.xda-developers.com/showthread.php?t=1758945
Sent from my SGH-T999 using Tapatalk 2
-------------------------------------------------------------------------------------------
Files, app:
www . Der Kernel . com
Kernel Source: https://bitbucket.org/morfic/trinity_ten
http://goo.gl/tUkg9A Trinity 10 KitKat 4.4.3 kernel Build 1
-------------------------------------------------------------------------------------------
Featuring:
Build optimizations
Performance through research
Static UV
GPU OC to 600+ MHz
Removed wasteful debugging
VM, Governor tweaks
row, sio added
fsync control
2000MHz (Use an app that protects the sysfs files to not have OS meddle with freqs)
Bullshít Free (Not pushing buzzwords to drop them later like others)
Morfic! Awesome to see you here . loved your nexus s kernels !
Sent from my Nexus 4 using Tapatalk 2
great morfic! looking forward to rock the trinity kernels on my n10. i've been using your kernels since the nexus s days so welcome here :good:
lol. I have a purchased version of TKT. Just removed it yesterday from my Nexus 10. Today, I see there is support for Nexus 10 and have to install it again.
Best regards,
Finally, trinity for my nexus 10!
Sent from my Nexus 7 using xda app-developers app
Oh wow this is so awesome
We've been seeing a lot of development for nexus 10 this past week and now trinity is here.
Keep the development coming! Looking forward to this
King of Rapture™ said:
lol. I have a purchased version of TKT. Just removed it yesterday from my Nexus 10. Today, I see there is support for Nexus 10 and have to install it again.
Best regards,
Click to expand...
Click to collapse
FYI, Trickster also now works on the Nexus 10. Not sure if the Play Store has been updated yet for it but the latest Manta beta version supports everything that Trickster normally does
Looking forward to doing some testing with this kernel as well.
i am using LIQUIDSMOOTH rom and i flash this kernel and i get stock at boot
rubene66 said:
i am using LIQUIDSMOOTH rom and i flash this kernel and i get stock at boot
Click to expand...
Click to collapse
Not for cm
Sent from my Liquid ROM filled Nexus 10
Bataga said:
Not for cm
Sent from my Liquid ROM filled Nexus 10
Click to expand...
Click to collapse
Isn't liquid aosp based?
Sent from my Nexus 4 using xda premium
jarjar124 said:
Isn't liquid aosp based?
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
It contains some CM tweaks if you read the Liquid ROM OP. Those CM tweaks are probably what's causing the bootloop. I'm assuming the ROM has to be pure AOSP based.
Pure Aosp based? That's a bit difficult. I'm also on Liquid smooth.
Sent from my Nexus 7 using xda premium
Lim Wee Huat said:
Pure Aosp based? That's a bit difficult. I'm also on Liquid smooth.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
This kernel works with MMuzzyROM and PA. I'm sure morfic (morfique?) will update it eventually to work on CM.
404 ERROR said:
This kernel works with MMuzzyROM and PA. I'm sure morfic (morfique?) will update it eventually to work on CM.
Click to expand...
Click to collapse
Should work on aokp too, right?
Sent from my Galaxy Nexus using Tapatalk 2
dreitzell78 said:
Should work on aokp too, right?
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
I'm not a dev nor do I have any dev knowledge, so I don't know. It's not the fact that it has "CM" parts in it that doesn't make it work, but CM has a tweak in there that makes this kernel bootloop. If AOKP also has the tweak, then it's going to bootloop as well.
Just make a nandroid and try it.
Hey Morfic do you think we'll see a gamma and display calibration tool in the near future?
Fidelator said:
Hey Morfic do you think we'll see a gamma and display calibration tool in the near future?
Click to expand...
Click to collapse
ktoonz stated that samsung took something out for this so it will be very likely to do that.
jarjar124 said:
ktoonz stated that samsung took something out for this so it will be very likely to do that.
Click to expand...
Click to collapse
Someone found the drivers with mDNIe support for our screen (or at least they were named the same way as ours) on a Samsung's site.
Fidelator said:
Someone found the drivers with mDNIe support for our screen (or at least they were named the same way as ours) on a Samsung's site.
Click to expand...
Click to collapse
who is that someone and which is that samsung site?
each time i talk to supercurio about mDNIe, he ends up commenting how it's not "real mDNIe", if it was it would be nice (not implying i talked to him about N10)
Hey all. I hate bloated OP's so this is a simple one. I don't post changelogs in here, only when I released new versions so you'll have to search for it.
Just for general awareness this is compatible with CyanogenMod based roms.
Download:
4.4
http://192.241.177.15/Nexus10/4.4/
How to flash:
fastboot flash boot image_name
or
flash the zip in your custom recovery
Source:
https://github.com/franciscofranco/manta/tree/nightlies-4.4
Kernel changelog:
http://192.241.177.15/Nexus10/4.4/appfiles/changelog.xml
franco.Kernel updater Free apk: http://forum.xda-developers.com/showthread.php?t=1867127
F.A.Q.
1. My tablet exploded, halp!
A: I don't answer to problems without a log. The log file is in /proc/last_kmsg. Retrieve it from your device and attach it to your post.
2. This kernel works on Y or X rom?
A: This is one of the worse questions you can ask on my threads. This is a Nexus, it works on every rom you can possibly imagine.
3. OMG BETTARY SUCKZ, IT DEAD IN 45 MINUTAS, HALP!
A: As you can imagine I don't build kernels to decrease battery life. All the battery life problems come from your apps, either Facebook, or Maps, or some Location Service being enabled etc etc. Check your damn wakelocks and fix them, the kernel is not responsible for them.
4. How do I flash this?
A: Reading the OP, theres a reason why I added instructions on it.
What exactly does the thermal throttling patch do?
First! Excited to see your kernel making its way here. Love your kernel on the Galaxy Nexus. Thanks again!
Sent from my Nexus 10 using xda premium
TheGrayHatter said:
What exactly does the thermal throttling patch do?
Click to expand...
Click to collapse
ARM: EXYNOS: Fix thermal throttle once tripping
Once TMU_STATUS_TRIPPED was reached, thermal_throttle() was not being called.
Click to expand...
Click to collapse
Basically just ensures that after that constant is true the thermal_throttle function call is called.
franciscofranco said:
F.A.Q.
1. My phone exploded, halp!
A: I don't answer to problems without a log. The log file is in /proc/last_kmsg. Retrieve it from your device and attach it to your post.
Click to expand...
Click to collapse
Hmm, if your phone explodes after trying a new kernel on a tablet, you might have bigger problems on your hands
Joking aside, awesome This was my kernel of choice on the Nexus 7.
AW YEAH!
Yea!!! Now I need to buy a Nexus 10. Thanks Franco for supporting the Nexus 10
What kind of features do you plan to try and add to this kernel?
omg
EniGmA1987 said:
What kind of features do you plan to try and add to this kernel?
Click to expand...
Click to collapse
We'll see, still too fresh and still need to get to know the Exynos5 arch.
Things that are NOT coming no matter how hard I get asked: overclock & undervolting.
franciscofranco said:
Things that are NOT coming no matter how hard I get asked: overclock & undervolting.
Click to expand...
Click to collapse
Any reason why (just being curious)?
Yes! Franco on all the Nexus!
Sent from my Nexus 10
Looks like the Kernel updater app isn't compatible for now
Waaaaargh....
Now is franco on all my Nexus
Nice Work - keep it up....Thanks Man
I see myself obliged to support you financially with a donation
rgds
404 ERROR said:
Any reason why (just being curious)?
Click to expand...
Click to collapse
Because its useless in my opinion and bring all sorts of problems for me.
espionage724 said:
Looks like the Kernel updater app isn't compatible for now
Click to expand...
Click to collapse
Not yet, I'm not a machine!
franciscofranco said:
Because its useless in my opinion and bring all sorts of problems for me.
Click to expand...
Click to collapse
I see. Sounds good. Overclocking is pretty useless on the Nexus 10.
If you haven't already read around, thermal throttling is a big issue on the Nexus 10 which makes it seem a lot weaker than it is. So hopefully your kernel can cater around that issue.
Thanks!
404 ERROR said:
I see. Sounds good. Overclocking is pretty useless on the Nexus 10.
If you haven't already read around, thermal throttling is a big issue on the Nexus 10 which makes it seem a lot weaker than it is. So hopefully your kernel can cater around that issue.
Thanks!
Click to expand...
Click to collapse
How? Throttles too much?
Won't boot on aokp. I know the op said cm, but I tried anyways. So for the others that will ask, aokp is a no go for now.
Sent from my Nexus 4 using xda app-developers app
Throttles too easily. Run stability test app on the stock kernel and you will see the clock drop from 1700 to 1500 after a minute or two.
Sent from my EVO using xda app-developers app
franciscofranco said:
How? Throttles too much?
Click to expand...
Click to collapse
Yeah. When playing games at stock speeds, it'll start to throttle and lag.
People have been fixing this by undervolting, underclocking to about 1.2 ghz, and raising the thermal throttle temperature.
I just flashed Faux123's first release for the note 2. I was a big fan of his with my Sensation back in the day with Intellidemand. His intelliplug is a new feature and I'm having trouble finding what exactly it does. Any links or help would be most excellent.
TIA - Vin
Found it in his dev thread
Intelli_plug is a total replacement for Qualcomm's proprietary mpdecsion.
it hotplug/unplug cpu cores based on load demand of the system.
mpdecision is a closed source proprietary solution from Qualcomm and it's not very efficient at hotplug/unplug cpu cores leading to hotter cpu and poor battery. My intelliplug is a complete OPEN Source solution to mpdecision and it is done in kernel instead of userspace (which it has to poll the kernel in order to make its decisions therefore inherently slower than in kernel solution like intelliplug).
Sent from my Note 2 with Jellybeer AOSP goodness
Vineares said:
I just flashed Faux123's first release for the note 2. I was a big fan of his with my Sensation back in the day with Intellidemand. His intelliplug is a new feature and I'm having trouble finding what exactly it does. Any links or help would be most excellent.
TIA - Vin
Sent from my Note 2 with Jellybeer AOSP goodness
Click to expand...
Click to collapse
Where did you get the release from?
He posted it on his twitter account.
Sent from my Note 2 with Jellybeer AOSP goodness
Faux123 can release anything as far as I'm concerned. He's hands down the best kernel dev to ever hit xda. I used him on my sensation and my hd2. Never had a bad one, they were the best. Now I don't know much about his release but I'm sure it's the ish. What's his twitter?
Sent from my SGH-T889 using xda app-developers app
yungtexas said:
Faux123 can release anything as far as I'm concerned. He's hands down the best kernel dev to ever hit xda. I used him on my sensation and my hd2. Never had a bad one, they were the best. Now I don't know much about his release but I'm sure it's the ish. What's his twitter?
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
@faux123
---------- Post added at 11:25 AM ---------- Previous post was at 11:24 AM ----------
Vineares said:
He posted it on his twitter account.
Sent from my Note 2 with Jellybeer AOSP goodness
Click to expand...
Click to collapse
I see it but no info on it. I know he is doing it for at&t and Verizon but not sure it for us at tmo
Any kernel would work for us too correct?
-Sent from Marino's Note II-
Just downloaded and it working perfect
Ok, so what is intelliplug?
gcng said:
Ok, so what is intelliplug?
Click to expand...
Click to collapse
I been googling that and no answer. I use his kernels cause they fast and damn stable.
I've searched on google, all over anything that says faux123 and nothing.
gcng said:
I've searched on google, all over anything that says faux123 and nothing.
Click to expand...
Click to collapse
All I know is my phone is a bit more responsive and by tonight I will know what battery life is like
Found it
Intelli_plug is a total replacement for Qualcomm's proprietary mpdecsion.
it hotplug/unplug cpu cores based on load demand of the system.
mpdecision is a closed source proprietary solution from Qualcomm and it's not very efficient at hotplug/unplug cpu cores leading to hotter cpu and poor battery. My intelliplug is a complete OPEN Source solution to mpdecision and it is done in kernel instead of userspace (which it has to poll the kernel in order to make its decisions therefore inherently slower than in kernel solution like intelliplug).
Sent from my Note 2 with Jellybeer AOSP goodness
BACARDILIMON said:
@faux123
---------- Post added at 11:25 AM ---------- Previous post was at 11:24 AM ----------
I see it but no info on it. I know he is doing it for at&t and Verizon but not sure it for us at tmo
Click to expand...
Click to collapse
he has a tmo version too, about to test it out.
Sent from my SGH-T889 using xda premium
Sorry to drag out a old thread but are you guys using the intelli-plug option? If so do you notice any difference in speed/smoothness or cpu temterature?
Thanks,
Vic