[Q] rotating stop working - Galaxy Note II Q&A, Help & Troubleshooting

Hi there,
my note 2 screen stops rotating. It happens for example after one day after i rebooted the device .The solution is to set screen brightness to auto ,when i uncheck auto brightness -screen stops rotating again .Only reboot fix it for some time. This bug is so annoying ,my rom is stock .
Does anyone know how to get rid of it ?

pksred said:
Hi there,
my note 2 screen stops rotating. It happens for example after one day after i rebooted the device .The solution is to set screen brightness to auto ,when i uncheck auto brightness -screen stops rotating again .Only reboot fix it for some time. This bug is so annoying ,my rom is stock .
Does anyone know how to get rid of it ?
Click to expand...
Click to collapse
woahhh i turned auto brightness ON and it finally started rotating again, cheers mate. But yeah i cant figure out why it doesn't rotate when you turn the auto brightness off.

Related

[Q] there is any Auto brightness controller ??!

Hey guys how are u all
Ihave a question can i rise the brightness up with auto brightness working
Becouse if i but mark on auto brightness icant rise up the brightness
Like ios do coz on low brightness there is avertical bending isue on my screen
And iwant to ask if there is any rom that solve the vertical bending problem thank you very much
Get an LCD screen device.
Banding == solved.
adrynalyne said:
Get an LCD screen device.
Banding == solved.
Click to expand...
Click to collapse
That not asolution ilove my gnexus and im not thinking for replace it
Thats your only solution to banding.
Yes there is a solution just rise up the brightness and the vertical bending will dissapear but if you did you cant apply the auto brightness mode and thats the problem
Bigxie's rom let's you set the autobrightness level: it's the only one I've tried so I can't comment on whether there's other roms that do the same thing.
You can use an auto brightness app and set custom brightness levels, like mine.
Ive tried that app, free version on ics 4.0.3 and had several reboots\crashes.
One is when using pattern to unlock:
- Screen is set to turn off after 30 sec, when the screen dims before shutting off and i swipe the pattern it crashes reboots.
Also in normal operation when the screen dims at shutoff point and i do something to wake it it can crash\reboot.
I have had mainly two brightness settings, 40.0 and 130 lux (0.5mA)
40.0 was set at 21% and 130 at 33%.
When commuting on bus\train the light conditions change frequently and also that can cause the reboot\crash.

GPS and auto brightness toruble

hi all..
My GF just got the note 2 and it's having some issues with the auto brightness and GPS connection..
I've got an S3 (wanamlite rom) so I'm comparing the problems to this.
First.. the only way to get the GPS to lock is to reboot the phone first.. if the phone has been on for a while the GPS will NOT lock at all... my S3 locks in <10sec always.
second issue is the auto brightness, it fails to go into full brightness in direct sun light.. in the *#0*# option the note's lux reading is about 1/2 of my S3's always
anyone else have trouble with any of these things??

Screen brightness

Hi guys i've a new questions for all
Usually i keep the brightness of the screen about to 80%,but after 20 minutes of intense use of the phone a strange thing happens:
The brightness goes down about to 55/60% and to get back as before i must act on the settings....
What happens?How can i disable this thing?
Thank you
robsup79 said:
Hi guys i've a new questions for all
Usually i keep the brightness of the screen about to 80%,but after 20 minutes of intense use of the phone a strange thing happens:
The brightness goes down about to 55/60% and to get back as before i must act on the settings....
What happens?How can i disable this thing?
Thank you
Click to expand...
Click to collapse
Anyone can help me please?
If I use the buttons at the pulldown menu to set the brightness to automatic it goes back to 50% after a cuple of time. When I set it into the Settings Menu it works normaly.
Good to know that I'm not the only one experiencing this irritating anomaly. Anyway, I have not found a solution as of yet. I'm running the latest build, and the problem is still there.
Problem solved by a member of telefonino.net (maorr):
-Open build.prop
-Search this line "ro.config.disablesmbacklinght=true"
-Change in "false"
-Reboot the phone
Now the problem is gone :good:
robsup79 said:
Hi guys i've a new questions for all
Usually i keep the brightness of the screen about to 80%,but after 20 minutes of intense use of the phone a strange thing happens:
The brightness goes down about to 55/60% and to get back as before i must act on the settings....
What happens?How can i disable this thing?
Thank you
Click to expand...
Click to collapse
it is same auto brightnes as in iphone 5 .. when is set to auto it automatically moving with slider depends of light intense .

BEWARE!!! YUREKA stock cm 12 users

This bug deserved a new thread.
If you've updated your phone to cm12, 5.0.2 then DO NOT DO THE FOLLOWING:
1. in Settings>Display and lights DO NOT keep "Adaptive Brightness" and "Color Enhancement" switched on at the same time. If you do, and then EVER try to manually reduce the screen brightness to minimum, YOUR SCREEN WILL BO BLANK. PERMANENTLY. Not kidding.
AND IT WILL NOT RETURN TO WORKING CONDITION without a factory reset.
Things that won't work:
1. Pulling out the battery and trying to reboot it. Nope. Been there, done that.
Hope CM takes note of this.
AS a Public Service.....
AyanReborn said:
This bug deserved a new thread.
If you've updated your phone to cm12, 5.0.2 then DO NOT DO THE FOLLOWING:
1. in Settings>Display and lights DO NOT keep "Adaptive Brightness" and "Color Enhancement" switched on at the same time. If you do, and then EVER try to manually reduce the screen brightness to minimum, YOUR SCREEN WILL BO BLANK. PERMANENTLY. Not kidding.
AND IT WILL NOT RETURN TO WORKING CONDITION without a factory reset.
Things that won't work:
1. Pulling out the battery and trying to reboot it. Nope. Been there, done that.
Hope CM takes note of this.
AS a Public Service.....
Click to expand...
Click to collapse
This happened to you???
yep. Currently using the phone without color enhancement enabled.
yesterday I faced the same problem
Yesterday My screen became black as I have enabled adaptive display & color correction it was not immediately it became black after 5 to 6 hours later after I set the setting & it was not displaying any thing I tried removing battery but it did not got fix.I did clear cache & factory reset then it started back.
Then you guys can do bug report to CYANOGENMODE or Here YU Forums
Got Hard Bricked no fastboot just dead thn join this petition
https://www.change.org/p/yu-yureka-provide-customer-care-service
Cure for it
well i have experienced it. but to avoid it you can choose the option
setting>status bar> and check Adjust brightness by sliding across the status bar.
so whenever the screen turned off you can swipe on the top from left to right so that brightness can be adjusted again!
you dont have to reset your phone.
AyanReborn said:
This bug deserved a new thread.
If you've updated your phone to cm12, 5.0.2 then DO NOT DO THE FOLLOWING:
1. in Settings>Display and lights DO NOT keep "Adaptive Brightness" and "Color Enhancement" switched on at the same time. If you do, and then EVER try to manually reduce the screen brightness to minimum, YOUR SCREEN WILL BO BLANK. PERMANENTLY. Not kidding.
AND IT WILL NOT RETURN TO WORKING CONDITION without a factory reset.
Things that won't work:
1. Pulling out the battery and trying to reboot it. Nope. Been there, done that.
Hope CM takes note of this.
AS a Public Service.....
Click to expand...
Click to collapse
I faced this today only.... screen went completely blank for a few sec, although I was not aware of this bug, but the brightness slider on status bar saved me....
So many bugs in this CM12.... huh...
and the screen off effects are gone as well after CM12 ugrade...
rahulbasu2013 said:
I faced this today only.... screen went completely blank for a few sec, although I was not aware of this bug, but the brightness slider on status bar saved me....
So many bugs in this CM12.... huh...
and the screen off effects are gone as well after CM12 ugrade...
Click to expand...
Click to collapse
Yupp ur right there is lots of bug in cm12..i didnt find any silent mode..there is only vibration mode is available..
kenil89 said:
Yupp ur right there is lots of bug in cm12..i didnt find any silent mode..there is only vibration mode is available..
Click to expand...
Click to collapse
ya silent mode not available... you have to go tosettings and uncheck the "vibrate to ring" option
even auto brightness dont work all the time... lollipop is really bad... not worth the upgrade...
---------- Post added at 06:11 AM ---------- Previous post was at 06:10 AM ----------
happened to me also.... I thought it was a problem with a theme... so i initially rated it 2 stars on play store, but after i saw it was a problem with cm, i went back and gave that theme a 5 star rating...
SOLUTION!!!!
It is still possible to take control over your phone in this situation. If your screen goes blank, this doesn't means that your phone has stopped working, the phone is still functional and you just have to find a way to increase the brightness. If you ever encounter this problem just swipe the screen twice from top to bottom to open the status bar and then slide your fingers on the screen where the brightness controller is present. This will surely solve your problem without any factory reset bull****. Please note that during this complete process the screen will remain blank. I have tested it a hundred times and it works 100%.
this works ... instead of factory reset
shamsiareeb said:
It is still possible to take control over your phone in this situation. If your screen goes blank, this doesn't means that your phone has stopped working, the phone is still functional and you just have to find a way to increase the brightness. If you ever encounter this problem just swipe the screen twice from top to bottom to open the status bar and then slide your fingers on the screen where the brightness controller is present. This will surely solve your problem without any factory reset bull****. Please note that during this complete process the screen will remain blank. I have tested it a hundred times and it works 100%.
Click to expand...
Click to collapse
Not fixed still
Please someone take this in lights to cynogen devlopers
how to set the display contrast
or colour enhancement
in yu yureka
Just install vysor in your pc and plug your phone to the pc. Now control your phone using your pc and increase the brightness same wy you reduced it. No need for any factory reset. Hope this helps.
you should Try this
Facing The Phone to Direct Sunlight or if in the night. face it near to the bulb. It will adapt light from the bulb and screen works then you can turn off adaptive brightness. That's works for me.

How to stop Home screen rotation?

Hi!
My Desire Eye's home screen has been rotating whenever I slightly tilt it since this morning and no, the Auto Rotation mode is not enabled. I did a soft reset but still the screen keeps rotating, and I can't find any solutions for it anywhere.
Usually, when Auto Rotate is ON it rotates almost every apps' screens but never the home screen or menu screen. When I woke up today somehow the Car mode was turned ON, but I exited it without doing anything else. I wonder if it caused something to change in my phone.
Does anyone know how to fix this? You'd save a life. :crying:
suevietts said:
Hi!
My Desire Eye's home screen has been rotating whenever I slightly tilt it since this morning and no, the Auto Rotation mode is not enabled. I did a soft reset but still the screen keeps rotating, and I can't find any solutions for it anywhere.
Usually, when Auto Rotate is ON it rotates almost every apps' screens but never the home screen or menu screen. When I woke up today somehow the Car mode was turned ON, but I exited it without doing anything else. I wonder if it caused something to change in my phone.
Does anyone know how to fix this? You'd save a life. :crying:
Click to expand...
Click to collapse
Wierd. Are you sure you dont hace any xposed setting or insertcoin control enabled?
luisitox22 said:
Wierd. Are you sure you dont hace any xposed setting or insertcoin control enabled?
Click to expand...
Click to collapse
Yes, I'm sure.

Categories

Resources