Develop Bugs

Bricked Kindle, bought factory cable, got to stay in fastboot, then bricked it again

I am so frustrated. I tried rooting the kindle last week and it went into an endless loop of turning on and off. So I ordered a factory cable and when I plugged it in, it stayed on and fastboot recognized the device.
I tried a few commands and now it's turning on and off again! I can no longer get commands to read the device through fastboot.
what the hell do I do?
EDIT: Sorry I forgot to check off "this thread is a question"

Ok so if I leave the tablet unplugged for a while and replug it, I can send a command and have it go through before the tablet resets again.
But I don't know how to get it to stay in fastboot mode, and I don't know what to do once i'm actually IN fastboot mode (I dont have TWRP or whatever installed).
Any help is appreciated
EDIT: I tried this command:
C:\Program Files (x86)\Android\android-sdk\platform-tools>fastboot -i 0x1949 boot c:\twrp-fire-2.1.0.img
creating boot image...
creating boot image - 10240 bytes
< waiting for device >
downloading 'boot.img'...
FAILED (command write failed (No such file or directory))
finished. total time: 0.005s

Hmmm did you try the kfu or the kindle fire unbrick utility?

Step-by-step
1) Make sure you have some charge left in your bricked Kindle. (one of my mistakes
2) Download "Kindle Fire Utility" or other utility that has the fastboot.exe command available.
3) Download twrp-blaze-2.0.0RC0.img (just google it)
4) Without connecting anything, run the command:
fastboot.exe -i 0x1949 boot twrp-blaze-2.0.0RC0.img
5) Connect the factory cable to your Kindle Fire
6) Connect the factory cable to you PC
7) Wait about 10 seconds.
8) DONE!!!!
all these steps above taken from http://forum.xda-developers.com/showthread.php?p=25113108&posted=1#post25113108
the OP deserves the credit if this works for you

You're doing it wrong. Unlike TWRP 2.0.0RC0, 2.1.0 is not supposed to be loaded into boot and your system is probably panicking. You need a bootloader first.
First you need a bootloader with recovery selection. There are several to choose from at this point.
I would recommend FIREFIREFIRE 1.3 or 1.2
Download one of them and extract the bin somewhere. Lets say c:\firebuild\
Next we need a recovery partition, you already have that in the twrp-fire-2.1.0.img, so you should be set. Copy that to c:\firebuild\ as well.
Now, lets make sure you have the andriod sdk in your path. This way you don't have to be in the C:\Program Files (x86)\Android\android-sdk\platform-tools folder to run commands and your images can be elsewhere.
1. right click on computer and select properties.
2. click on advanced settings on the left of the window.
3. click on environment variables at the bottom right of the window.
4. in the system variables section scroll down until you find path, highlight it, and select edit.
5. paste the following at the end of the line.
Code:
;C:\Program Files (x86)\Android\android-sdk\platform-tools;C:\Program Files (x86)\Android\android-sdk\tools;
For example, my path is:
Code:
C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;;C:\Program Files\Lucidlogix Technologies\VIRTU;C:\Program Files (x86)\QuickTime\QTSystem\;C:\Program Files (x86)\Android\android-sdk\platform-tools;C:\Program Files (x86)\Android\android-sdk\tools;
Now that your path is set, lets go into the command prompt.
First lets change the directory to c:\firebuild\ :
Code:
cd c:\firebuild
In this folder we should have u-boot.bin and twrp-fire-2.1.0.img.
First lets load your bootloader.
Code:
fastboot -i 0x1949 flash bootloader u-boot.bin
and start your device.
I would recommend rebooting after flashing this, so run
Code:
fastboot reboot
if it does not reboot on its own.
Now lets run
Code:
fastboot flash recovery twrp-fire-2.1.0.img
Note: Because we have the bootloader now the -i 0x1949 is no longer needed.
After running the above, the kindle should automatically start into recovery.
From here you will be able to mount it as an external drive and copy over any rom you would like to use.
Pick something from here Kindle Fire Development *FULL LIST* - 17.04.2012 - under the Custom / Stock Roms section.

three-p-o said:
You're doing it wrong. Unlike TWRP 2.0.0RC0, 2.1.0 is not supposed to be loaded into boot and your system is probably panicking. You need a bootloader first.
First you need a bootloader with recovery selection. There are several to choose from at this point.
I would recommend FIREFIREFIRE 1.3 or 1.2
Download one of them and extract the bin somewhere. Lets say c:\firebuild\
Next we need a recovery partition, you already have that in the twrp-fire-2.1.0.img, so you should be set. Copy that to c:\firebuild\ as well.
Now, lets make sure you have the andriod sdk in your path. This way you don't have to be in the C:\Program Files (x86)\Android\android-sdk\platform-tools folder to run commands and your images can be elsewhere.
1. right click on computer and select properties.
2. click on advanced settings on the left of the window.
3. click on environment variables at the bottom right of the window.
4. in the system variables section scroll down until you find path, highlight it, and select edit.
5. paste the following at the end of the line.
Code:
;C:\Program Files (x86)\Android\android-sdk\platform-tools;C:\Program Files (x86)\Android\android-sdk\tools;
For example, my path is:
Code:
C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;;C:\Program Files\Lucidlogix Technologies\VIRTU;C:\Program Files (x86)\QuickTime\QTSystem\;C:\Program Files (x86)\Android\android-sdk\platform-tools;C:\Program Files (x86)\Android\android-sdk\tools;
Now that your path is set, lets go into the command prompt.
First lets change the directory to c:\firebuild\ :
Code:
cd c:\firebuild
In this folder we should have u-boot.bin and twrp-fire-2.1.0.img.
First lets load your bootloader.
Code:
fastboot -i 0x1949 flash bootloader u-boot.bin
and start your device.
I would recommend rebooting after flashing this, so run
Code:
fastboot reboot
if it does not reboot on its own.
Now lets run
Code:
fastboot flash recovery twrp-fire-2.1.0.img
Note: Because we have the bootloader now the -i 0x1949 is no longer needed.
After running the above, the kindle should automatically start into recovery.
From here you will be able to mount it as an external drive and copy over any rom you would like to use.
Pick something from here Kindle Fire Development *FULL LIST* - 17.04.2012 - under the Custom / Stock Roms section.
Click to expand...
Click to collapse
Thank you SO MUCH! I was able to get both files on. I don't know how to get into recovery, but here is the output:
c:\firebuild>fastboot -i 0x1949 flash bootloader u-boot.bin
< waiting for device >
sending 'bootloader' (203 KB)...
OKAY [ 0.055s]
writing 'bootloader'...
OKAY [ 0.051s]
finished. total time: 0.106s
c:\firebuild>fastboot -i 0x1949 reboot
rebooting...
finished. total time: 0.002s
c:\firebuild>fastboot flash recovery twrp-fire-2.1.0.img
sending 'recovery' (6 KB)...
OKAY [ 0.006s]
writing 'recovery'...
OKAY [ 0.045s]
finished. total time: 0.051s
c:\firebuild>fastboot -i 0x1949 reboot
rebooting...
finished. total time: 0.003s
c:\firebuild>fastboot -i 0x1949 boot twrp-fire-2.1.0.img
creating boot image...
creating boot image - 10240 bytes
downloading 'boot.img'...
OKAY [ 0.006s]
booting...
OKAY [ 0.003s]
finished. total time: 0.010s

When you first turn the kindle on you will get a yellow triangle (FFF 1.2) or a Kundle Fire logo with the Android (FFF 1.3). When in that screen tap the power button until it turns orange. It should then boot you into TWRP.
From there you can goto mount and then click mount usb storage, this will allow you to copy the rom you picked to the SDCard.
After copied, unmount, then goto install and select to install the rom.
Oh, one more thing. Don't forget to wipe cache, dalvik-cache, and factory restore.

Format partitions in fastboot mode

Hi, my kf2 is stucked at fastboot, i'm not able to boot into recovery or system, i have succesfully installed fff-1.4a using a factory cable (because it was bricked with the stock bootloader) and have installed the otter2-twrp-2.4.4.0-recovery.img from hashcode..
It boots and i see the blue kindle logo, and have a menu, but when i select recevery it just turns on the amber light and stays there, i have left it for about 5 minutes waiting to see if it get to revery with no luck.
I tried this:
Code:
sudo fastboot -i 0x18d1 getvar product
< waiting for device >
product: kindle
finished. total time: 0.000s
sudo fastboot -i 0x18d1 oem format
...
OKAY [ 0.068s]
finished. total time: 0.068s
Then
Code:
sudo fastboot -i 0x18d1 flash boot fff-u-boot_v1.4a.bin
< waiting for device >
sending 'boot' (243 KB)...
OKAY [ 0.065s]
writing 'boot'...
OKAY [ 0.051s]
finished. total time: 0.115s
sudo fastboot reboot
rebooting...
sudo fastboot -i 0x18d1 flash boot fff-u-boot_v1.4a.bin
< waiting for device >
sending 'boot' (243 KB)...
OKAY [ 0.065s]
writing 'boot'...
OKAY [ 0.051s]
finished. total time: 0.115s
It succeed as you can see, it has the fff bootloader and twrp recovery is installed!!
Then i tried
Code:
sudo fastboot -i 0x18d1 flash zip cm-10.1-20130704-NIGHTLY-otter2.zip
< waiting for device >
sending 'zip' (155204 KB)...
OKAY [ 38.806s]
writing 'zip'...
FAILED (remote: partition does not exist)
finished. total time: 38.813s
It seem like a partition table problem maybe because i'm trying to install Cyanogenmod and not a stock image...
I think maybe i must reformat the partitions but i only have access to fastboot and i have read the documentation of Android Fastboot in OmapPedia but i'm not sure it's a "generic" information and don't want to mess up things more.
I have read many trheads in the forum but all of them use adb and there's not a thread with instructions about it..
Or maybe i need to flash all the images (system, kernel, etc..) with fastboot but i don't know where to get it, the main problem is that i'm not able to boot into recovery and maybe that point to the real problem
Any help is appreciated !!
Thank's

You can't write CyanogenMod from fast boot.
Sounds like somewhere in there you formatted the system partition. You need the stack file on the system partition in order to boot into recovery.
Restore to stock using fast boot and try again.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

How?
mindmajick said:
You can't write CyanogenMod from fast boot.
Sounds like somewhere in there you formatted the system partition. You need the stack file on the system partition in order to boot into recovery.
Restore to stock using fast boot and try again.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Maybe it is the problem as fastboot oem format seems to do the job...
I have downloaded the stock update-kindle-6.3.2_D01E_4110520.bin, please can you point to the thread explainig how to do that using fastboot or it's just as easy as rename the file to update.zip and flash it directly?
Edited: also i'm not completely sure it's a kf2 and can't get a hint on how to discover it without knowing the is version :banghead: I've looked one the motherboard and is a MB0090 F3F.
I've downloaded the stock bin for the kf2 too...
Thank' for your quick reply

Well. If you have a kf2... The update you downloaded is wrong. IT'S FOR THE ORIGINAL KINDLE FIRE.
Without knowing what device u have u better slow down a sec. Any advice i give COULD permabrick u of you're on the wrong device.
What color was the BOX it came in? What is the model# on the back? (Same for kf1 AND 2 BUT NOT THE KF HD 7" OR 8").
Be advised- this device is EASY TO BRICK. BE CAREFUL.
--
Sent from my mind to your screen.
---------- Post added at 02:48 AM ---------- Previous post was at 02:40 AM ----------
Also. The correct update file wont work either.
You can only flash image files from fastboot.
--
Sent from my mind to your screen.

It's apparent you have a KF1 and not a KF2. The command "fastboot -i 0x18d1..." would not work on the KF2 because it still has the stock bootloader (unless something miraculous happened while I was AFK). The stock bootloader has a VID of 1949, and will not answer to commands using a different VID. 18d1 is Goggle's VID and is indicative of having FFF installed (KF1 only).
BTW, the "-i 0x18d1" part is completely unnecessary on FFF.
That's not your biggest problem though....
Code:
sudo fastboot -i 0x18d1 flash boot fff-u-boot_v1.4a.bin
That command is completely wrong. What you're doing there is flashing the bootloader (fff-u-boot_v1.4a.bin) to the boot (kernel) partition. Obviously, there is no way that could possibly would work out for you. After the "fastboot" portion of the command, you need to specify what you want done with the image in question: flash or boot. "Flash" is persistent, "boot" is for one boot only. In the next part of the command, you need to specify which partition the image in question goes to; bootloader, recovery, boot, etc.
What you need to do is get an actual recovery.img and flash it to your recovery partition before you can even think of accessing said recovery to flash a ROM and get your device working again.

soupmagnet said:
It's apparent you have a KF1 and not a KF2. The command "fastboot -i 0x18d1..." would not work on the KF2 because it still has the stock bootloader (unless something miraculous happened while I was AFK). The stock bootloader has a VID of 1949, and will not answer to commands using a different VID. 18d1 is Goggle's VID and is indicative of having FFF installed (KF1 only).
BTW, the "-i 0x18d1" part is completely unnecessary on FFF.
That's not your biggest problem though....
Code:
sudo fastboot -i 0x18d1 flash boot fff-u-boot_v1.4a.bin
That command is completely wrong. What you're doing there is flashing the bootloader (fff-u-boot_v1.4a.bin) to the boot (kernel) partition. Obviously, there is no way that could possibly would work out for you. After the "fastboot" portion of the command, you need to specify what you want done with the image in question: flash or boot. "Flash" is persistent, "boot" is for one boot only. In the next part of the command, you need to specify which partition the image in question goes to; bootloader, recovery, boot, etc.
What you need to do is get an actual recovery.img and flash it to your recovery partition before you can even think of accessing said recovery to flash a ROM and get your device working again.
Click to expand...
Click to collapse
Well you are completely right!! Didn't realize I was flashing it to the kernel partition, I bought this on eBay and it was already bricked, when I used the factory cable first time I got a lab26 device, and it was a 1949 so, if I'm right it's a kf2.
I've already flashed a twrp recovery but it won't boot.. I'll try sintering else and post the results here
Sent from my SPH-D710 using xda premium

LUC4X said:
when I used the factory cable first time I got a lab26 device, and it was a 1949 so, if I'm right it's a kf2.
I've already flashed a twrp recovery but it won't boot.. I'll try sintering else and post the results here
Click to expand...
Click to collapse
No. The stock bootloader on all generations and variants of Kindle Fires have vendor IDs of 1949. The fact that your device responds to the "fastboot -i 0x18d1..." clearly means you have a custom bootloader installed in its place. If you have an actual custom bootloader installed (not 2nd bootloader) then you clearly cannot possibly have a KF2.
In this thread, you say you have installed recovery twice, but the information given seems to suggest otherwise.
So to try and get to the root of the problem, what is the exact command you used to install custom recovery, and what custom recovery (version) did you install?

Glad you are here soupmagnet!
I didn't even look at the commands he was using but i definitely learned stuff from your posts. Thanks again
--
Sent from my mind to your screen.

Commands used
soupmagnet said:
No. The stock bootloader on all generations and variants of Kindle Fires have vendor IDs of 1949. The fact that your device responds to the "fastboot -i 0x18d1..." clearly means you have a custom bootloader installed in its place. If you have an actual custom bootloader installed (not 2nd bootloader) then you clearly cannot possibly have a KF2.
In this thread, you say you have installed recovery twice, but the information given seems to suggest otherwise.
So to try and get to the root of the problem, what is the exact command you used to install custom recovery, and what custom recovery (version) did you install?
Click to expand...
Click to collapse
Sorry guys i was out of town...
These are the commands (bootloader & recovery) i've used till now:
sudo fastboot -i 0x18d1 flash bootloader fff-u-boot_v1.4a.bin
< waiting for device >
sending 'bootloader' (243 KB)...
OKAY [ 0.065s]
writing 'bootloader'...
OKAY [ 0.083s]
finished. total time: 0.148s
sudo fastboot -i 0x18d1 flash recovery otter2-twrp-2.4.4.0-recovery.img
sending 'recovery' (8153 KB)...
OKAY [ 2.042s]
writing 'recovery'...
OKAY [ 2.705s]
finished. total time: 4.748s
Click to expand...
Click to collapse
Also tryed the twrp from teamw's site in both versions (otter & blaze) just to make sure, by issuing the following commands:
sudo fastboot -i 0x18d1 flash recovery openrecovery-twrp-2.5.0.0-blaze.img
< waiting for device >
sending 'recovery' (6144 KB)...
OKAY [ 1.540s]
writing 'recovery'...
OKAY [ 1.514s]
finished. total time: 3.054s
Click to expand...
Click to collapse
With this, when i reboot and select the recovery it turns on the amber light for 2 seconds and shuts down.
Then when i install the other recovery version (blaze from teamw):
sudo fastboot -i 0x18d1 flash recovery openrecovery-twrp-2.5.0.0-otter.img
< waiting for device >
sending 'recovery' (6144 KB)...
OKAY [ 1.540s]
writing 'recovery'...
OKAY [ 0.684s]
finished. total time: 2.224s
Click to expand...
Click to collapse
When select recovery i get the same result: amber light for 2 seconds and turns off.
And with hashcode otter2-twrp-2.4.4.0-recovery.img:
sudo fastboot -i 0x18d1 flash recovery otter2-twrp-2.4.4.0-recovery.img
< waiting for device >
sending 'recovery' (8153 KB)...
OKAY [ 2.042s]
writing 'recovery'...
OKAY [ 0.894s]
finished. total time: 2.937s
Click to expand...
Click to collapse
It hangs on amber light and i have to manually turn it off holding the power buttom for 10 seconds...
So you think it is a kf1 based on the device id?, it shows that id after i installed the fff-u-boot_v1.4a.bin from hashcode that i intended for the kf2...
Well, based on that i have installed a kf1 bootloader:
Downloaded the Kindle Fire Utility v0.9.9.zip from http://forum.xda-developers.com/showthread.php?t=2192818
Unzipped it (as i'm GNU/Linux)
"Grepped" recursively till find the web address to download files from
Downloaded fff-u-boot_v1.4a.bin
Downloaded openrecovery-twrp-2.4.4.0-blaze.img
Followed the install procedure
Same result !!, still can't get it to boot into recovery...
Really i hope someone here can point me to the right direction to fix this tablet, can't figure out what's wrong with kf(?)

LUC4X said:
So you think it is a kf1 based on the device id?, it shows that id after i installed the fff-u-boot_v1.4a.bin from hashcode that i intended for the kf2...
Well, based on that i have installed a kf1 bootloader:
Downloaded the Kindle Fire Utility v0.9.9.zip from http://forum.xda-developers.com/showthread.php?t=2192818
Unzipped it (as i'm GNU/Linux)
"Grepped" recursively till find the web address to download files from
Downloaded fff-u-boot_v1.4a.bin
Downloaded openrecovery-twrp-2.4.4.0-blaze.img
Followed the install procedure
Same result !!, still can't get it to boot into recovery...
Really i hope someone here can point me to the right direction to fix this tablet, can't figure out what's wrong with kf(?)
Click to expand...
Click to collapse
Lets get a few things clear right off the bat. The file named fff-u-boot_v1.4a.bin is the custom bootloader for the KF1. The bootloader flashed in the KF2 2nd bootloader installation is named otter2-u-boot-prod-10.2.4.bin. If you flash the fff-u-boot_v1.4a.bin (FFF1.4a) onto a KF2, you would end up with something that is slightly less useful than a doorstop.
Why you re-installed it is a mystery to me. You already had FFF1.4a installed. I know this (as I explained earlier) by the fact that your commands, using the "-i 0x18d1" switch, were successful. If you had a stock bootloader, no commands containing that particular vendor ID would work at all. If you had a KF2, there is absolutely NO WAY you would have a device that responds to fastboot commands using "-i 0x18d1". Even with a modified KF2, with 2nd bootloader installed, the vendor ID would still be 1949 and all fastboot commands must include "-i 0x1949" or they will not work. You can confirm the fact that you have FireFireFire installed by entering a fastboot command without adding "i- 0x18d1". With FireFireFire (KF1 only), the commands will still work because it is unnecessary to specify the vendor ID.
That being said, I'm not entirely sure what's going on with TWRP using both "otter" and "blaze" for the board name (I think it has something to do with Goo Manager?), but anything you get from the TWRP website should work for the KF1 (for the time being at least). Anything you get from Hashcode will be for the 2nd generation KFs.
I would suggest, to avoid complicating things any further, that you download Cannibal Open Touch recovery, confirm that the MD5sums match after downloading, and flash it to recovery in fastboot. COTR only works for the KF1 (not made for the 2nd Generation devices yet) so there is "practically" no way you can get the wrong one. If that works and you still want to try TWRP, download the one for Blaze, check the MD5 (as you should with everything), and try flashing it in recovery again.
If you still can't get your device to boot into recovery, try the command again, but replace the word "flash" with the word "boot" and leave out the partition (i.e. 'fastboot boot openrecovery-twrp-2.4.4.0-blaze.img'). If the device boots into recovery, then you know you have the right one and you may have bad blocks in your recovery partition preventing it from booting, but you won't know for sure without checking a few things out first.

Followed your instructions and get the same result...
Maybe i should install a complete system from fastboot and let it try to boot, but where can i get those files?
What do you think?

soupmagnet said:
Lets get a few things clear right off the bat. The file named fff-u-boot_v1.4a.bin is the custom bootloader for the KF1. The bootloader flashed in the KF2 2nd bootloader installation is named otter2-u-boot-prod-10.2.4.bin. If you flash the fff-u-boot_v1.4a.bin (FFF1.4a) onto a KF2, you would end up with something that is slightly less useful than a doorstop.
Why you re-installed it is a mystery to me. You already had FFF1.4a installed. I know this (as I explained earlier) by the fact that your commands, using the "-i 0x18d1" switch, were successful. If you had a stock bootloader, no commands containing that particular vendor ID would work at all. If you had a KF2, there is absolutely NO WAY you would have a device that responds to fastboot commands using "-i 0x18d1". Even with a modified KF2, with 2nd bootloader installed, the vendor ID would still be 1949 and all fastboot commands must include "-i 0x1949" or they will not work. You can confirm the fact that you have FireFireFire installed by entering a fastboot command without adding "i- 0x18d1". With FireFireFire (KF1 only), the commands will still work because it is unnecessary to specify the vendor ID.
That being said, I'm not entirely sure what's going on with TWRP using both "otter" and "blaze" for the board name (I think it has something to do with Goo Manager?), but anything you get from the TWRP website should work for the KF1 (for the time being at least). Anything you get from Hashcode will be for the 2nd generation KFs.
I would suggest, to avoid complicating things any further, that you download Cannibal Open Touch recovery, confirm that the MD5sums match after downloading, and flash it to recovery in fastboot. COTR only works for the KF1 (not made for the 2nd Generation devices yet) so there is "practically" no way you can get the wrong one. If that works and you still want to try TWRP, download the one for Blaze, check the MD5 (as you should with everything), and try flashing it in recovery again.
If you still can't get your device to boot into recovery, try the command again, but replace the word "flash" with the word "boot" and leave out the partition (i.e. 'fastboot boot openrecovery-twrp-2.4.4.0-blaze.img'). If the device boots into recovery, then you know you have the right one and you may have bad blocks in your recovery partition preventing it from booting, but you won't know for sure without checking a few things out first.
Click to expand...
Click to collapse
Followed your instructions and get the same result...
Maybe i should install a complete system from fastboot and let it try to boot, i've found you uploaded a system.img to androidfilehost...
What do you think?

I posted that ages ago. I'm not even sure what device it's for.
Check the file size. If it's around 350MB go ahead. If it's closer to 500MB then it's probably for the HD.
I can't imagine why you couldn't load recovery using the 'fastboot boot recovery.img' command. Did you receive any errors when trying?

soupmagnet said:
I posted that ages ago. I'm not even sure what device it's for.
Check the file size. If it's around 350MB go ahead. If it's closer to 500MB then it's probably for the HD.
I can't imagine why you couldn't load recovery using the 'fastboot boot recovery.img' command. Did you receive any errors when trying?
Click to expand...
Click to collapse
There's not error message, this is the output:
Code:
sudo fastboot boot CannibalOpenTouch-v2.1_otter.img
< waiting for device >
downloading 'boot.img'...
OKAY [ 1.394s]
booting...
OKAY [ 0.004s]
finished. total time: 1.398s
But it never boots up and stays off.
I'm seriously thinking it may be a hardware failure but i wont give up until i'm completely sure about it.. that's why i though i should reformat partitions at the first time but the fastboot oem format command "seems" to work, perhaps it takes very short time to execute 0.068s and it is a very short time, so i though maybe it isn't really formatting anything, is it a "normal time"?
Right now i'm downloading the file it's 380MB maybe something good could happen!!
I'll try the following and will post the results:
Code:
fastboot flash system system.img
fastboot erase userdata
fastboot erase cache
fastboot reboot

LUC4X said:
There's not error message, this is the output:
Code:
sudo fastboot boot CannibalOpenTouch-v2.1_otter.img
< waiting for device >
downloading 'boot.img'...
OKAY [ 1.394s]
booting...
OKAY [ 0.004s]
finished. total time: 1.398s
But it never boots up and stays off.
I'm seriously thinking it may be a hardware failure but i wont give up until i'm completely sure about it.. that's why i though i should reformat partitions at the first time but the fastboot oem format command "seems" to work, perhaps it takes very short time to execute 0.068s and it is a very short time, so i though maybe it isn't really formatting anything, is it a "normal time"?
Right now i'm downloading the file it's 380MB maybe something good could happen!!
I'll try the following and will post the results:
Code:
fastboot flash system system.img
fastboot erase userdata
fastboot erase cache
fastboot reboot
Click to expand...
Click to collapse
The command 'fastboot oem format' will only make sure the partition layout is stock, it does not format the partitions themselves. The information within the limits of the partitions will remain untouched, so it won't do you much good in this situation. The only way to properly format any partition is with recovery (or 'parted' which is usually run from recovery anyway). Your situation is rather unique because the "fastboot boot' command doesn't write anything to the recovery partition. It loads the disk image you choose, into active memory, as if your computer were a separate partition on which that image is stored. There shouldn't be any reason for it to not work properly.
Try to flash the system partition you downloaded and see how it goes. I would also suggest that you make absolutely sure the md5sums match before installing any image to your device, including the recovery images you downloaded before.

soupmagnet said:
The command 'fastboot oem format' will only make sure the partition layout is stock, it does not format the partitions themselves. The information within the limits of the partitions will remain untouched, so it won't do you much good in this situation. The only way to properly format any partition is with recovery (or 'parted' which is usually run from recovery anyway). Your situation is rather unique because the "fastboot boot' command doesn't write anything to the recovery partition. It loads the disk image you choose, into active memory, as if your computer were a separate partition on which that image is stored. There shouldn't be any reason for it to not work properly.
Try to flash the system partition you downloaded and see how it goes. I would also suggest that you make absolutely sure the md5sums match before installing any image to your device, including the recovery images you downloaded before.
Click to expand...
Click to collapse
Code:
sudo fastboot flash system system.img
sending 'system' (389120 KB)...
OKAY [ 97.308s]
writing 'system'...
OKAY [ 36.819s]
finished. total time: 134.131s
sudo fastboot erase userdata
erasing 'userdata'...
OKAY [116.935s]
finished. total time: 116.935s
sudo fastboot erase cache
erasing 'cache'...
OKAY [ 29.189s]
finished. total time: 29.189s
sudo fastboot reboot
rebooting...
finished. total time: 0.000s
Must be hardware, it's sad... if it where a SMD flash memory i would try to changed it but it's a tyni BGA chip...
Thank you very much for your help

I wouldn't give up just yet. You can still try to usbboot, using the shorting trick.

soupmagnet said:
I wouldn't give up just yet. You can still try to usbboot, using the shorting trick.
Click to expand...
Click to collapse
I'll try tonight !!
Sent from my SPH-D710 using xda premium

soupmagnet said:
I wouldn't give up just yet. You can still try to usbboot, using the shorting trick.
Click to expand...
Click to collapse
./usb_fix_parts_and_install_fff_twrp
Loading FFF through USB...
?
waiting for OMAP44xx device...
sending 2ndstage to target...
waiting for 2ndstage response...
sending image to target...
Fixing partitions...
< waiting for device >
... OKAY
Installing x-loader...
sending 'xloader' (128 KB)... OKAY
writing 'xloader'... OKAY
Flash FFF...
sending 'bootloader' (211 KB)... OKAY
writing 'bootloader'... OKAY
Flash TWRP...
sending 'recovery' (5260 KB)... OKAY
writing 'recovery'... OKAY
Resetting bootmode to standard boot...
... OKAY
Loading TWRP...
downloading 'boot.img'... OKAY
booting... OKAY
Click to expand...
Click to collapse
Same as before, it won't reboot after sending the boot to recovery command and if try to get into recovery it turns off after an amber light..

LUC4X said:
Followed your instructions and get the same result...
Maybe i should install a complete system from fastboot and let it try to boot, but where can i get those files?
What do you think?
Click to expand...
Click to collapse
At the begining i saw you were using "fastboot flash zip...." that's wrong command.. should be "fastboot flash update xxxx.zip"
so if you find the totally package, youcan use it.
also you has mixture the boot.img and bootloader.bin..
recovery is not needed if you can flash the right bootloader and boot.:laugh:

[Q] KFHD 8.9 with 8.4.6

Hi guys I got 3HT7G model and I am trying to root it so I can install CM. I am having problem with getting device in to fastboot mode. I have several HTC phone and new Nexus 7 and my fastboot works perfectly, SDK is installed and all tools under C:\sdk\platform-tools
Now this is my first Kindle but from what I understand from before I had to always get in to bootloader/fastboot mode manually and only then ADB start to work. In here I see if "waiting for device" is active unit will automatically will get in to fastboot, well it does not for me. Any adias on wtf is going on here this is driving me mad. I have this Kindle drivers installed and adb is checked on in security. I am starting to think my 8.4.6 version is somehow diffirent from other. Anyone please help.
Thank you, once again other devices like Nexus 7 works and getvar command gives me needed answer ......

More details on what you have done would be nice, but basically you turn your kindle off, leave it u plugged, and on the PC run "fastboot -i 0x1949 getvar product", once it says waiting for device you plug your kindle in and it should go into fastboot. If you hear windows make a noise like something connected and disconnected very fast but it doesn't enter fastboot then you need to try to install the driver in my signature for the device as it appears on windows so you can successfully run the fastboot command.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app

stunts513 said:
More details on what you have done would be nice, but basically you turn your kindle off, leave it u plugged, and on the PC run "fastboot -i 0x1949 getvar product", once it says waiting for device you plug your kindle in and it should go into fastboot. If you hear windows make a noise like something connected and disconnected very fast but it doesn't enter fastboot then you need to try to install the driver in my signature for the device as it appears on windows so you can successfully run the fastboot command.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
Yeah sorry should of known.
1. I tried adb devices
List of devices attached
B0C9100424551JHB device
2. I tried bin4ry tool v31 and instead of usual download/sending I got an path error ....
I was about to copy from prompt ...and it looks like for some reason this time it worked, I do see superuser app now but I did got an error there in the middle , don't know if it matters. I'll report if anything is messed up later on with ROM installation. Anyway to check ROOT status from stock system ? So I know this app is not just pretty face ?

managed to get everything installed here are last few output code:
C:\Users\Konstantin\Downloads\KindleFireHD89Root\stuff>fastboot -i 0x1949 flash
bootloader kfhd8-u-boot-prod-8.1.4.bin
target reported max download size of 1006632960 bytes
sending 'bootloader' (243 KB)...
OKAY [ 0.019s]
writing 'bootloader'...
OKAY [ 0.035s]
finished. total time: 0.055s
C:\Users\Konstantin\Downloads\KindleFireHD89Root\stuff>fastboot -i 0x1949 flash
boot kfhd8-freedom-boot-8.4.3.img
target reported max download size of 1006632960 bytes
sending 'boot' (8173 KB)...
OKAY [ 0.445s]
writing 'boot'...
OKAY [ 0.562s]
finished. total time: 1.009s
C:\Users\Konstantin\Downloads\KindleFireHD89Root\stuff>fastboot -i 0x1949 flash
recovery kfhd8-twrp-2.6.0.0-recovery.img
target reported max download size of 1006632960 bytes
sending 'recovery' (8173 KB)...
OKAY [ 0.445s]
writing 'recovery'...
OKAY [ 0.567s]
finished. total time: 1.014s
C:\Users\Konstantin\Downloads\KindleFireHD89Root\stuff>fastboot -i 0x1949 reboot
rebooting...
finished. total time: 0.000s
C:\Users\Konstantin\Downloads\KindleFireHD89Root\stuff>[/CODE]
After reboot for about 30 mins now I see kindlefire logo (fire is blue in logo) It does not reboot or anything it just sits there. Oh man I hope I haven't screw something up. I tried to boot in to recovery, I could. I restarted again, and again I am on blue kindlefire logo. What's going on ? Anything I should try ? I don't have any roms inside device memory yet. In device manager I see Kindle with yellow mork on it (odd)

You have to put the ROM on the sdcard so you can flash it when it does this, use my tutorial to get a ROM on it, also try updating the drivers again for the device with an exclamation using the ones in my signature. http://forum.xda-developers.com/showthread.php?t=2459498
Technically you can also boot the device into stock rooted os, but you need to flash an older version from before they started making sure the boot loader was the same version as the os, otherwise when they don't match the end result is well, what you have before you right now.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app

I always do this to myself, ALWAYS. I panic and think this is the problem I and only I could possibly have and about 3 posts later I found like 10 more people with exact same problem that think this is first in the world just like me, anyhow I did sideload feature and loaded cm .zip and installed sideload.zip from install. I am looking at CM logo booting, so far so good.
P.S.
I was looking at that logo for sometime now, I had to do wipe data and restart once again. All good now.
Thank you !

Is this fixable? Did I brick this thing?!

Here's my problem...
My Kindle Fire HD (Jem) is stuck on the Kindle Fire boot screen (orange logo, no animation). I haven't been able to get it to mount to any of my computers running various operating systems. More details below.
Here are the steps that made my device like this...
Got root using the latest eploit for 8.5.1 successfully. I confirmed that I did have root level access.
Side loaded FireFlash11
Used FireFlash11 to try installing 2nd-bootloader, TWRP and CM. I got the files from here: http://forum.xda-developers.com/showthread.php?t=2128175
Booted into recovery mode and immediately performed a backup.
When I soft rebooted after the backup I only ever saw the Kindle Fire boot screen (orange logo, no animation).
Some other notes...
In Ubuntu when I hard shut down the device and then start it up I get the message Unable to mount JEM-etc. etc.
In Windows if I when I hard shut down the device and then start it up I see something about JEM-etc etc in device manager for a quick second and then it dissapears.
I tried SoupKit on Ubuntu with no luck. I've tried just about every option but no luck. The device never mounts.
I've never had root on this device before. I just got this device a couple of days ago.
Please help! Thanks in advance for your time and effort!

sotrite5 said:
Here's my problem...
My Kindle Fire HD (Jem) is stuck on the Kindle Fire boot screen (orange logo, no animation). I haven't been able to get it to mount to any of my computers running various operating systems. More details below.
Here are the steps that made my device like this...
Got root using the latest eploit for 8.5.1 successfully. I confirmed that I did have root level access.
Side loaded FireFlash11
Used FireFlash11 to try installing 2nd-bootloader, TWRP and CM. I got the files from here: http://forum.xda-developers.com/showthread.php?t=2128175
Booted into recovery mode and immediately performed a backup.
When I soft rebooted after the backup I only ever saw the Kindle Fire boot screen (orange logo, no animation).
Some other notes...
In Ubuntu when I hard shut down the device and then start it up I get the message Unable to mount JEM-etc. etc.
In Windows if I when I hard shut down the device and then start it up I see something about JEM-etc etc in device manager for a quick second and then it dissapears.
I tried SoupKit on Ubuntu with no luck. I've tried just about every option but no luck. The device never mounts.
I've never had root on this device before. I just got this device a couple of days ago.
Please help! Thanks in advance for your time and effort!
Click to expand...
Click to collapse
Completely power off the Kindle (hold power button for 10 seconds), and then type fastboot -i 0x1949 getvar product into the terminal. Plug in the Kindle as soon as you get the <waiting for device> message. after a few seconds, you should get a string beginning with "Jem-PVT". If you do, download the 2nd bootloader, etc. from Hashcode's thread and flash them as directed in step 5. After that, follow the directions to reboot into TWRP, and your recovery process should be complete.
Sent from my Amazon Jem using XDA Labs

monster1612 said:
Completely power off the Kindle (hold power button for 10 seconds), and then type fastboot -i 0x1949 getvar product into the terminal. Plug in the Kindle as soon as you get the <waiting for device> message. after a few seconds, you should get a string beginning with "Jem-PVT". If you do, download the 2nd bootloader, etc. from Hashcode's thread and flash them as directed in step 5. After that, follow the directions to reboot into TWRP, and your recovery process should be complete.
Sent from my Amazon Jem using XDA Labs
Click to expand...
Click to collapse
Thanks for taking the time to post, monster. Unfortunately this doesn't work for me. In fact, before I ever changed a thing on my device fastboot wasn't working for me (just ADB), in spite of everything being properly installed on my computer. Could this be an issue with 8.5.1? Any other thoughts?

sotrite5 said:
Thanks for taking the time to post, monster. Unfortunately this doesn't work for me. In fact, before I ever changed a thing on my device fastboot wasn't working for me (just ADB), in spite of everything being properly installed on my computer. Could this be an issue with 8.5.1? Any other thoughts?
Click to expand...
Click to collapse
If you've got ADB enabled on your Kindle (settings -> security if I remember correctly?), you should be able to type adb reboot bootloader and have it boot into fastboot without a hitch.
Sent from my Amazon Jem using XDA Labs

monster1612 said:
If you've got ADB enabled on your Kindle (settings -> security if I remember correctly?), you should be able to type adb reboot fastboot and have it boot into fastboot without a hitch.
Sent from my Amazon Jem using XDA Labs
Click to expand...
Click to collapse
Although I did have ADB enabled on my Kindle, I am no longer able to communicate with it via ADB since using FireFlash11 to install the 2nd-bootloader, TWRP and CM. The Kindle now does not appear when I type adb devices (although it always had before using FireFlash).

Alright, I think I'm just going to return this one. I have lost all hope. Were the steps that I took above flawed? I'd consider purchasing this same device, but I need to know the mistake that I made. Can anyone tell me?

sotrite5 said:
Alright, I think I'm just going to return this one. I have lost all hope. Were the steps that I took above flawed? I'd consider purchasing this same device, but I need to know the mistake that I made. Can anyone tell me?
Click to expand...
Click to collapse
I wouldn't give up just yet. Try repeating the same directions I gave you, expect from Linux (Ubuntu) this time as opposed to Windows.
Sent from my Amazon Jem using XDA Labs

*EDIT #2 - WE DID IT, BOYS! I just want to say god bless the following:
monster
hashcode
goldenbullet
cyanogenmod
my mother
america
Monster, thanks for all of your help. I will name my first born male child after you. You earned it.
*EDIT I MADE IT INTO RECOVERY by using "fastboot -i 0x1949 oem recovery" once in fastboot mode. I'll continue with your instructions now.!
Well, fastboot worked and so I got excited for a second there but unfortunately I'm stuck again. I successfully followed all of the instructions in step 5, but unfortunately I am still stuck on the orange kindle fire boot-screen. The logo never becomes blue....
I am not able to get into recovery by holding the up and/or down volume buttons
I am not able to get into recovery via terminal yet. I can still see "fastboot mode" with the blue arrow when I issue the "fastboot -i 0x1949 getvar product" command, but it does not respond when I issue commands like "fastboot boot kfhd8-twrp-2.8.7.0-recovery.img" or fastboot flash recovery kfhd8-twrp-2.8.7.0-recovery.img" -- always just "waiting for device".
The device appears in Ubuntu's launcher as Jem PVT 04 (ONLY when in fastboot mode), but when I try to access it I get an error message about it being inaccessible.
The device still does not respond to ADB
Any other ideas?
Code:
[email protected]:~/Downloads$ fastboot -i 0x1949 flash bootloader kfhd8-u-boot-prod-8.1.4.bin
< waiting for device >
target reported max download size of 1006632960 bytes
sending 'bootloader' (243 KB)...
OKAY [ 0.022s]
writing 'bootloader'...
OKAY [ 0.042s]
finished. total time: 0.063s
[email protected]:~/Downloads$ fastboot -i 0x1949 flash boot kfhd8-freedom-boot-8.4.6.img
target reported max download size of 1006632960 bytes
sending 'boot' (8173 KB)...
OKAY [ 0.546s]
writing 'boot'...
OKAY [ 0.572s]
finished. total time: 1.118s
[email protected]:~/Downloads$ fastboot -i 0x1949 flash recovery kfhd8-twrp-2.8.7.0-recovery.img
target reported max download size of 1006632960 bytes
sending 'recovery' (8173 KB)...
OKAY [ 0.531s]
writing 'recovery'...
OKAY [ 0.566s]
finished. total time: 1.097s
[email protected]:~/Downloads$ fastboot -i 0x1949 reboot
rebooting...
finished. total time: 0.050s

sotrite5 said:
*EDIT #2 - WE DID IT, BOYS! I just want to say god bless the following:
monster
hashcode
goldenbullet
cyanogenmod
my mother
america
Monster, thanks for all of your help. I will name my first born male child after you. You earned it.
*EDIT I MADE IT INTO RECOVERY by using "fastboot -i 0x1949 oem recovery" once in fastboot mode. I'll continue with your instructions now.!
Well, fastboot worked and so I got excited for a second there but unfortunately I'm stuck again. I successfully followed all of the instructions in step 5, but unfortunately I am still stuck on the orange kindle fire boot-screen. The logo never becomes blue....
I am not able to get into recovery by holding the up and/or down volume buttons
I am not able to get into recovery via terminal yet. I can still see "fastboot mode" with the blue arrow when I issue the "fastboot -i 0x1949 getvar product" command, but it does not respond when I issue commands like "fastboot boot kfhd8-twrp-2.8.7.0-recovery.img" or fastboot flash recovery kfhd8-twrp-2.8.7.0-recovery.img" -- always just "waiting for device".
The device appears in Ubuntu's launcher as Jem PVT 04 (ONLY when in fastboot mode), but when I try to access it I get an error message about it being inaccessible.
The device still does not respond to ADB
Any other ideas?
Code:
[email protected]:~/Downloads$ fastboot -i 0x1949 flash bootloader kfhd8-u-boot-prod-8.1.4.bin
< waiting for device >
target reported max download size of 1006632960 bytes
sending 'bootloader' (243 KB)...
OKAY [ 0.022s]
writing 'bootloader'...
OKAY [ 0.042s]
finished. total time: 0.063s
[email protected]:~/Downloads$ fastboot -i 0x1949 flash boot kfhd8-freedom-boot-8.4.6.img
target reported max download size of 1006632960 bytes
sending 'boot' (8173 KB)...
OKAY [ 0.546s]
writing 'boot'...
OKAY [ 0.572s]
finished. total time: 1.118s
[email protected]:~/Downloads$ fastboot -i 0x1949 flash recovery kfhd8-twrp-2.8.7.0-recovery.img
target reported max download size of 1006632960 bytes
sending 'recovery' (8173 KB)...
OKAY [ 0.531s]
writing 'recovery'...
OKAY [ 0.566s]
finished. total time: 1.097s
[email protected]:~/Downloads$ fastboot -i 0x1949 reboot
rebooting...
finished. total time: 0.050s
Click to expand...
Click to collapse

Many years later and I find this post still helpful and it saved my KFHD8.9. I had this same issue with a KFHD 8.9 that I had repurposed to a photo frame. I flashed a new ROM to it, thinking it my photo frame app might run better on a different ROM. Only I hadn't flashed a ROM for a few years and got sloppy with the flashing sequence and wound up stuck at the Kindle Fire orange logo. I spent hours reading XDA posts and trying things to get fastboot and adb to get into the device during the roughly 2 or 3 second bootup window before it gets stuck. The problem is that the way windows 10 and windows 7 handle the USB drivers makes it almost impossible. I made an Ubuntu USB stick to boot from and loaded up fastboot, adb and the android usb drivers and was able to get my KFHD into fastboot mode instantly. Once there, it was simply a matter of running the fastboot commands above and I then I was in recovery and able to restore from a backup.
Many thanks!!!

---Delete----

kfhd 8.9 2nd gen rebooting

hi i hope someone can help me the problem is the kindle keeps rebooting and i cant get to access twrp it only goes to blue screen teamwin and just stays there i can get fastboot to work but thats about all
i think it has twrp-2.6.0.0 and cyanogenmod but thats all i know as im trying to fix it for a friend any suggestions or help would be much appreciated thank you
updae
update
ok this is what I've tried KFHD System.img Recovery Tool which is not doing any good
I've selected option 2 restore-su/supersu.apk this says writing 'system'...
FAILED (remote: : Write partition)
tried various different versions with no luck all saying failed
i have erase cache and user data
ive tried fastboot -i 0x1949 getvar product
fastboot -i 0x1949 flash bootloader kfhd8-u-boot-prod-8.1.4.bin
fastboot -i 0x1949 flash boot boot.img
Fastboot -i 0x1949 flash recovery recovery.img
fastboot -i 0x1949 flash system system.img
target reported max download size of 1006632960 bytes
sending 'system' (907264 KB)...
OKAY [ 48.735s]
writing 'system'...
FAILED (remote: : Write partition)
finished. total time: 50.907s
I've just been trying and trying
when i try adb devices while stuck on twrp teamwin screen
i get List of devices attached
B0C910013086074C unauthorized
so i cant use any adb commands
could this be that development options has been turned off in the settings sometimes it does load up but i cant do anything as i get loads of pop ups on the screen something to do with google has stopped report or ok avg has stopped and ect so i press ok and this constantly happens it then switches off and goes back on the blue android and stays there is there any way to recover from fastboot or delete the apps what's on there using fastboot any help would be appreciated thank you for your time