Related
Hello dear users of xda. I have a serious problem. My phone is bricked after installing Chainfire 3d driver on jellybean ( i forgot it will not work on JB)
So then i wanted to reflash the Jb MC8 but odin does'nt detect my phone ;(. Tried on 3 pc's tried reinstalling drivers, tried Heimdall still the same.
Recovery mode works, but i dont have a backup. (BTW i have stock recovery of JB MC8) Tried my friend's cable (she has ace 2 too) did'nt work. My flash counter is 2 so i am afraid i might even have to buy a new phone. Can anyone help???
Rihis said:
Hello dear users of xda. I have a serious problem. My phone is bricked after installing Chainfire 3d driver on jellybean ( i forgot it will not work on JB)
So then i wanted to reflash the Jb MC8 but odin does'nt detect my phone ;(. Tried on 3 pc's tried reinstalling drivers, tried Heimdall still the same.
Recovery mode works, but i dont have a backup. (BTW i have stock recovery of JB MC8) Tried my friend's cable (she has ace 2 too) did'nt work. My flash counter is 2 so i am afraid i might even have to buy a new phone. Can anyone help???
Click to expand...
Click to collapse
try reinstaling usb drivers if your PC dont recognise phone : http://forum.xda-developers.com/showthread.php?p=11633550#post11633550
Allready tried
Rooobertinhooo said:
try reinstaling usb drivers if your PC dont recognise phone : http://forum.xda-developers.com/showthread.php?p=11633550#post11633550
Click to expand...
Click to collapse
Dude i allready tried that 3 times ;(
I dont know chainfire, but have you already tried to flash Italian job or kyryllos Rom via temporary cwm again?
Sent from my GT-I8160 using xda app-developers app
One more thing
Rooobertinhooo said:
try reinstaling usb drivers if your PC dont recognise phone : http://forum.xda-developers.com/showthread.php?p=11633550#post11633550
Click to expand...
Click to collapse
Would it matter if i had disabled usb debug before the brick happened ?
Rihis said:
Would it matter if i had disabled usb debug before the brick happened ?
Click to expand...
Click to collapse
Flash via odin you can don't tick usb debugging, if odin cannot see your device you must reinstall samsung usb driver
You can copy rom cook to extarnal card and flash it via cwm or twrp i hope it work again
Sent from my GT-I8160 using xda premium
Don't have TWRP or CWM
shine911 said:
Flash via odin you can don't tick usb debugging, if odin cannot see your device you must reinstall samsung usb driver
You can copy rom cook to extarnal card and flash it via cwm or twrp i hope it work again
Sent from my GT-I8160 using xda premium
Click to expand...
Click to collapse
Dude i said i dont have any cwm or twrp installed. Odin does'nt detect phone even after reinstalling drivers 3 times. I have only stock recovery for my phone.
Can you tell me how?
forgottnxd said:
I dont know chainfire, but have you already tried to flash Italian job or kyryllos Rom via temporary cwm again?
Sent from my GT-I8160 using xda app-developers app
Click to expand...
Click to collapse
Please can you tell me how to enable temp cwm ? i am a complete noob and really want to get my phone back.
Rihis said:
Dude i said i dont have any cwm or twrp installed. Odin does'nt detect phone even after reinstalling drivers 3 times. I have only stock recovery for my phone.
Click to expand...
Click to collapse
You can copy cwm (the zip file) to the external card and rom cook try flash rom cook via cwm.
Sent from my GT-I8160 using xda premium
Give it to Samsung.
loof13 said:
Give it to Samsung.
Click to expand...
Click to collapse
Easy and simple way!
Sent from my GT-I8160 using xda premium
Seriously?
shine911 said:
Easy and simple way!
Sent from my GT-I8160 using xda premium
Click to expand...
Click to collapse
It's not funny my flash counter is 2 and i guarantee that they arent going to exchange mah old phone to a new one. Unless i think of a uber story of how i dont know what is flash counter and so on
Rihis said:
It's not funny my flash counter is 2 and i guarantee that they arent going to exchange mah old phone to a new one. Unless i think of a uber story of how i dont know what is flash counter and so on
Click to expand...
Click to collapse
I've given my old phone plenty of times to Samsung. It had flash counter 38! Most service centers don't look at it. Give it a shot.
I dont thing it will work dude
loof13 said:
I've given my old phone plenty of times to Samsung. It had flash counter 38! Most service centers don't look at it. Give it a shot.
Click to expand...
Click to collapse
The problem is, I am in Latvia and i dont think people here would'nt check the counter. Do you know any cwm flashable rom that could finally let me have my phone back ??
@Rihis : http://db.tt/m3Wje1qV CWM File Good luck
Search Before POSTING !
Any rom ?
Rikxzdjz said:
@Rihis : http://db.tt/m3Wje1qV CWM File Good luck
Search Before POSTING !
Click to expand...
Click to collapse
But what do i flash in cwm ? I dont think you can flash a .md5 in recovery
Md5 ? CWM backup files ? Yes u can ...
-Create a new file "clockworkmod"
-Move ur CWM Backup files to Clockworkmod folder
-Open CWM
-Restore
Search Before POSTING
http://forum.xda-developers.com/showthread.php?t=2000417 Q and A Thread !
Quick update : I installed Italian job 1.0 and it went past the Model screen but now it is just stuck on the samsung logo help again ???
Download CWM 6 from here : http://d-h.st/oZD
Installation :
1. Download the zip.
2. Put it in the sdcard.
3. Reboot to recovery.
4. Flash update.zip from the recovery.
5. Flash the Italian Job ROM [ HERE ]
---------- Post added at 03:43 AM ---------- Previous post was at 03:39 AM ----------
Rihis said:
Quick update : I installed Italian job 1.0 and it went past the Model screen but now it is just stuck on the samsung logo help again ???
Click to expand...
Click to collapse
u must Mount /system, /data, /cache, /preload to install Italian job
Reinstall it again
Master-ZizO said:
Download CWM 6 from here : http://d-h.st/oZD
Installation :
1. Download the zip.
2. Put it in the sdcard.
3. Reboot to recovery.
4. Flash update.zip from the recovery.
5. Flash the Italian Job ROM [ HERE ]
---------- Post added at 03:43 AM ---------- Previous post was at 03:39 AM ----------
u must Mount /system, /data, /cache, /preload to install Italian job
Reinstall it again
Click to expand...
Click to collapse
Thanks dude!!! (Can any mod close this thread???)
Hi, i need help D: i can't install any rom on my white s2, when i flash it the rom makes a bootloop, i try to install Paranoid 4.3, 4.4, XenonHD, Revolt, Cyanogen but the problem still, i get stuck on a boot loop D: someone know this problem? can i fix it?
P.D.: Sorry for my bad english
Jeffj0092 said:
Hi, i need help D: i can't install any rom on my white s2, when i flash it the rom makes a bootloop, i try to install Paranoid 4.3, 4.4, XenonHD, Revolt, Cyanogen but the problem still, i get stuck on a boot loop D: someone know this problem? can i fix it?
P.D.: Sorry for my bad english
Click to expand...
Click to collapse
Try to go back to stock through Odin and try to root again.
Sent from my SGH-T989 using Tapatalk 2
Jeffj0092 said:
Hi, i need help D: i can't install any rom on my white s2, when i flash it the rom makes a bootloop, i try to install Paranoid 4.3, 4.4, XenonHD, Revolt, Cyanogen but the problem still, i get stuck on a boot loop D: someone know this problem? can i fix it?
P.D.: Sorry for my bad english
Click to expand...
Click to collapse
What recovery and verision of it are you using? for 4.3+ roms you need CWM 6.0.3.7+ or TWRP 2.6.1.0
I´m also having this problem. I can't flash any ROM. I went back to stock and tried again with those versions of recovery but nothing.
13~BigBear~13 said:
Try to go back to stock through Odin and try to root again.
Sent from my SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
I've made that 4 times, but still the problem :C
Almite said:
What recovery and verision of it are you using? for 4.3+ roms you need CWM 6.0.3.7+ or TWRP 2.6.1.0
Click to expand...
Click to collapse
5.x D: can you give me the links of those recoverys?
tpag02 said:
I´m also having this problem. I can't flash any ROM. I went back to stock and tried again with those versions of recovery but nothing.
Click to expand...
Click to collapse
D: really? any rom? :c if this problem still, im going to sell my cellphone :C i dont want the touchwiz interface, im using my phone with launchers for the moment :'(
Just install twrp 2.6.1.0 and wipeout internal and external sd, just fit once and your problem will be solve. Than don't forget to say thanks
Sent from my SGH-T989 using xda app-developers app
iamdofus said:
Just install twrp 2.6.1.0 and wipeout internal and external sd, just fit once and your problem will be solve. Than don't forget to say thanks
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Ok, im going to prove that, can you post the link of the twrp pls? and i have a question, i make the wipes before flashing the rom or after?
Jeffj0092 said:
Ok, im going to prove that, can you post the link of the twrp pls? and i have a question, i make the wipes before flashing the rom or after?
Click to expand...
Click to collapse
Sorry for late reply, format both your card before installing and just put flashable file on you card I use twrp 2.6.0.0 and its working fine and yeah I use infamous wiping data and wiping cache script also while flsing the ROM.
Sent from my SGH-T989 using XDA Premium 4 mobile app
iamdofus said:
Sorry for late reply, format both your card before installing and just put flashable file on you card I use twrp 2.6.0.0 and its working fine and yeah I use infamous wiping data and wiping cache script also while flsing the ROM.
Sent from my SGH-T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Dont worry i've been using my phone with official 4.1.2 for the moment haha, i want to install the United Basics Rom 4.4 and i found the twrp 2.6.1.0 can i use that? or i need 2.6.0.0?
It looks like according to the author of United Basics ROM, he's running 2.6.3.1, at least that's what his signature says.
DEVICE: Samsung Galaxy S2 (T-Mobile)
ROM: United Basics v4.0
RECOVERY: TWRP 2.6.3.1
Hi xda. Im new in using Note 2. Can i upgrade my phone to Phoenix v16.7? Attached herewith the details of my phone (i.e. baseband, version, model)
vincemiles_07 said:
Hi xda. Im new in using Note 2. Can i upgrade my phone to Phoenix v16.7? Attached herewith the details of my phone (i.e. baseband, version, model)
Click to expand...
Click to collapse
If your phone is rooted and have custom recovery, then you can install phoenix rom v16.7. I'm using phoenix v16.7 now, but before you install ( flash) the rom, make sure *******you had BACKUP your original rom and ********follow the instructions to install the rom correctly ****
Hit thanks if this help you
---------- Post added at 04:57 PM ---------- Previous post was at 04:55 PM ----------
Also backup your efs.. Here is how to backup rom and efs
http://forum.xda-developers.com/showthread.php?t=2590799
Hit thanks if this help you
yeminswe said:
If your phone is rooted and have custom recovery, then you can install phoenix rom v16.7. I'm using phoenix v16.7 now, but before you install ( flash) the rom, make sure *******you had BACKUP your original rom and ********follow the instructions to install the rom correctly ****
Hit thanks if this help you
---------- Post added at 04:57 PM ---------- Previous post was at 04:55 PM ----------
Also backup your efs.. Here is how to backup rom and efs
http://forum.xda-developers.com/showthread.php?t=2590799
Hit thanks if this help you
Click to expand...
Click to collapse
Thanks for the quick response yeminswe. I have my efs backedup already. My followup question is, how to back up my original rom? I also have philz recovery. Btw, i cant find the thanks button. Where can i find it?
vincemiles_07 said:
Thanks for the quick response yeminswe. I have my efs backedup already. My followup question is, how to back up my original rom? I also have philz recovery. Btw, i cant find the thanks button. Where can i find it?
Click to expand...
Click to collapse
You backup your original ROM from Phils recovery. There is BACKUP option or BACKUP to ExtSD card. Mind you that it might take a lot of space like from 1.5Gb to 5Gb depending on the number of apps you have installed...
vincemiles_07 said:
Hi xda. Im new in using Note 2. Can i upgrade my phone to Phoenix v16.7? Attached herewith the details of my phone (i.e. baseband, version, model)
Click to expand...
Click to collapse
Don't forget to super wipe if upgrading from 4.1.2 to 4.3
Sent from my GT-N7100 powered by phoenix rom
hirdimas said:
Don't forget to super wipe if upgrading from 4.1.2 to 4.3
Sent from my GT-N7100 powered by phoenix rom
Click to expand...
Click to collapse
Hi. Thank you all for your replies. Im humbly asking a favor if you could provide me the link on how to do "superwipe"? Thanks again. Thanks button hitted.
vincemiles_07 said:
Hi. Thank you all for your replies. Im humbly asking a favor if you could provide me the link on how to do "superwipe"? Thanks again. Thanks button hitted.
Click to expand...
Click to collapse
Hi, just do the following:
1. On recovery: do a data wipe/factory reset.
2. Wipe cache partition.
3. On advanced, wipe dalvik cache.
4. On mounts and storage, format sd card ( internal, not your external 'cause that's where you'll store the new rom to flash and your backups).
5. Format system
Finally, once you begin phoenix atoma installer, on the process it'll ask you if you want to super wipe or something like that, just say yes...and that's it. Good luck. Of this helps, click the thanks button. Happy new year.
Sent from my GT-N7100 using XDA Premium 4 mobile app
nybodki condition
calichelozano said:
Hi, just do the following:
1. On recovery: do a data wipe/factory reset.
2. Wipe cache partition.
3. On advanced, wipe dalvik cache.
4. On mounts and storage, format sd card ( internal, not your external 'cause that's where you'll store the new rom to flash and your backups).
5. Format system
Finally, once you begin phoenix atoma installer, on the process it'll ask you if you want to super wipe or something like that, just say yes...and that's it. Good luck. Of this helps, click the thanks button. Happy new year.
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thank you thank you. Thanks button hitted
I really need to buy an external sd card. 8gb class 10 will do? I will bookmark this thread.
vincemiles_07 said:
I really need to buy an external sd card. 8gb class 10 will do? I will bookmark this thread.
Click to expand...
Click to collapse
Yeah, that'll do. But if I were you, I'd go for a 16 or even 32gb, it's worth it. Believe me, 8gb is nothing storing pics of your camera, some music, backup files an .apk's you normally use.
Sent from my GT-N7100 using XDA Premium 4 mobile app
I think that in Philz there is an option "prepare for new ROM flash", that erases everything needed.
Also, mind that Phlis v6.x is incompatible with some AROMA installers, so it is better to use v5.x
Up. How will i know if im on new bootloader or not? Is it necessary before flashing Phoenix rom?
vincemiles_07 said:
Up. How will i know if im on new bootloader or not? Is it necessary before flashing Phoenix rom?
Click to expand...
Click to collapse
If you're now on 4.1.2 - you are on OLD bootloader. You have to flash it separately from the ROM. You can either remain on your OLD bootloader and flash Dr. Ketan's Wifi patch or flash new bootloader, MJ5 recommended, because it doesn't have KNOX. So, 1st flash MJ5 bootloader and then flash ROM.
dalanik said:
If you're now on 4.1.2 - you are on OLD bootloader. You have to flash it separately from the ROM. You can either remain on your OLD bootloader and flash Dr. Ketan's Wifi patch or flash new bootloader, MJ5 recommended, because it doesn't have KNOX. So, 1st flash MJ5 bootloader and then flash ROM.
Click to expand...
Click to collapse
Thank you very much dalanik.
So, i need to have my bootloader mj5 first then flash Phoenix ROM?
vincemiles_07 said:
Thank you very much dalanik.
So, i need to have my bootloader mj5 first then flash Phoenix ROM?
Click to expand...
Click to collapse
Yes u are right ?
Sent from my GT-N7100 powered by phoenix rom
hirdimas said:
Yes u are right ?
Sent from my GT-N7100 powered by phoenix rom
Click to expand...
Click to collapse
Btw sir, what is MJ5 bootloader?
Can i use my old bootloader in Phoenix rom or this one is really neccesary/pre-requisite to install phoenix?
Up
vincemiles_07 said:
Btw sir, what is MJ5 bootloader?
Can i use my old bootloader in Phoenix rom or this one is really neccesary/pre-requisite to install phoenix?
Click to expand...
Click to collapse
Yes u can use old bootloader but wifi won't work..u must flash wifi patch..new bootloader prevent from random reboot and freeze
Sent from my GT-N7100 powered by phoenix rom
Ok thank you all. I think im ready to flash Phoenix Rom..
I cant seem to find an updated guide with files to root and install a custome recovery on the sprint note 2 with 4.3 can someone help me find a link or get me the files etc?
Thanks
Recovery
I went to cyanogenmods website and ran the installer as directed. That installed cyanogenmod and rooted the device automatically, then you can download and flash any of the other custom ROMs on this site.
I rooted 4.3 with allinone toolkit clicking older variation and worked fine
Sent from my SPH-L900 using xda app-developers app
unknowne said:
I went to cyanogenmods website and ran the installer as directed. That installed cyanogenmod and rooted the device automatically, then you can download and flash any of the other custom ROMs on this site.
Click to expand...
Click to collapse
My note 2 is blocking the cyanogenmod installer. It says unartherized access to a secured area on your phone without authorization has been blocked.
I'm stumped just got this phone and it is a pain to root
---------- Post added at 08:42 PM ---------- Previous post was at 08:05 PM ----------
supertwin33 said:
I rooted 4.3 with allinone toolkit clicking older variation and worked fine
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Whoo dude that did not work at all boots to the samsung boot screen then black screens. What to do now? I can still get it into the bootloader mode by holding volume down power and home.
kingfish600 said:
My note 2 is blocking the cyanogenmod installer. It says unartherized access to a secured area on your phone without authorization has been blocked.
I'm stumped just got this phone and it is a pain to root
---------- Post added at 08:42 PM ---------- Previous post was at 08:05 PM ----------
Whoo dude that did not work at all boots to the samsung boot screen then black screens. What to do now? I can still get it into the bootloader mode by holding volume down power and home.
Click to expand...
Click to collapse
Do this
1. Boot into download/bootloader mode.
2. Connect to pc and use odin to flash twrp. Make sure you uncheck reboot and flash twrp in the pda slot.
3. Once flashed pull battery and disconnect from pc.
4. Press vol+ menu power buttons while inserting battery (yes it is difficult but can be done)
5. Now in recovery perform factory reset.
6. Flash this http://forum.xda-developers.com/showthread.php?p=36388145
7. Now reboot it will act/look weird but dont worry this is normal. It will reboot and take a long time to boot.
Now you are on stock mc2 (no knox anymore). Root using cf autoroot http://forum.xda-developers.com/showthread.php?p=33278464
Now use odin once again and flash your recovery again. Now you are rooted and have a custom recovery. Oh and you have a working phone again.
Sent from my SPH-L900 using XDA Premium 4 mobile app
jlmancuso said:
Do this
1. Boot into download/bootloader mode.
2. Connect to pc and use odin to flash twrp. Make sure you uncheck reboot and flash twrp in the pda slot.
3. Once flashed pull battery and disconnect from pc.
4. Press vol+ menu power buttons while inserting battery (yes it is difficult but can be done)
5. Now in recovery perform factory reset.
6. Flash this http://forum.xda-developers.com/showthread.php?p=36388145
7. Now reboot it will act/look weird but dont worry this is normal. It will reboot and take a long time to boot.
Now you are on stock mc2 (no knox anymore). Root using cf autoroot http://forum.xda-developers.com/showthread.php?p=33278464
Now use odin once again and flash your recovery again. Now you are rooted and have a custom recovery. Oh and you have a working phone again.
Before I do all of that...I discovered I can boot into TWRP and updated it to the newest version. Then I installed the cyanogen nightly onto the phone. Everything seemed to be working ok except I couldn't get any phone signal but wifi worked. I tried loading the dirty unicornes rom and the same thing happened . I then flashed cm 10.1 and the phone worked for calls but the asop keyboard kept crashing and couldn't login to the wifi network. I tried several installs with factory resets with the same results. If I follow the directions you listed will I be able to install these roms and the phone work for calls or am I missing another piece of the puzzle?
Click to expand...
Click to collapse
kingfish600 said:
jlmancuso said:
Do this
1. Boot into download/bootloader mode.
2. Connect to pc and use odin to flash twrp. Make sure you uncheck reboot and flash twrp in the pda slot.
3. Once flashed pull battery and disconnect from pc.
4. Press vol+ menu power buttons while inserting battery (yes it is difficult but can be done)
5. Now in recovery perform factory reset.
6. Flash this http://forum.xda-developers.com/showthread.php?p=36388145
7. Now reboot it will act/look weird but dont worry this is normal. It will reboot and take a long time to boot.
Now you are on stock mc2 (no knox anymore). Root using cf autoroot http://forum.xda-developers.com/showthread.php?p=33278464
Now use odin once again and flash your recovery again. Now you are rooted and have a custom recovery. Oh and you have a working phone again.
Before I do all of that...I discovered I can boot into TWRP and updated it to the newest version. Then I installed the cyanogen nightly onto the phone. Everything seemed to be working ok except I couldn't get any phone signal but wifi worked. I tried loading the dirty unicornes rom and the same thing happened . I then flashed cm 10.1 and the phone worked for calls but the asop keyboard kept crashing and couldn't login to the wifi network. I tried several installs with factory resets with the same results. If I follow the directions you listed will I be able to install these roms and the phone work for calls or am I missing another piece of the puzzle?
Click to expand...
Click to collapse
Twrp does not work for 4.4
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
jlmancuso said:
kingfish600 said:
Twrp does not work for 4.4
Can I use CWM? ie flash it with TWRP?
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Cwm or philz (I recommend the latter)
Sent from my SPH-L900 using XDA Premium 4 mobile app
jlmancuso said:
Cwm or philz (I recommend the latter)
can you link to where i can dl a copy of philz as a zip i can flash with twrp?
Click to expand...
Click to collapse
Look for it in the development thread. The op will have a link. Use 6.07.9 version and make sure it has a zip extension not md5.
Sent from my SPH-L900 using XDA Premium 4 mobile app
jlmancuso said:
Look for it in the development thread. The op will have a link. Use 6.07.9 version and make sure it has a zip extension not md5.
There is a newer one philz_touch_6.15.4-l900.zip would it be better?
Click to expand...
Click to collapse
kingfish600 said:
jlmancuso said:
Look for it in the development thread. The op will have a link. Use 6.07.9 version and make sure it has a zip extension not md5.
There is a newer one philz_touch_6.15.4-l900.zip would it be better?
Click to expand...
Click to collapse
Use 6.07.9 if you want to know why read the last few pages of the thread.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
jlmancuso said:
kingfish600 said:
Use 6.07.9 if you want to know why read the last few pages of the thread.
Thankx for the help i'll flash in the morning,
Click to expand...
Click to collapse
Click to expand...
Click to collapse
kingfish600 said:
jlmancuso said:
kingfish600 said:
Use 6.07.9 if you want to know why read the last few pages of the thread.
It worked great! I put FTW Annihilation MK4 1.0.0 on it and have been very happy with it.
Thanks for the help again!
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Click to expand...
Click to collapse
i rooted via Kingo..
then download ROM manager and flash CWM touch....
backed up my ota 4.3....
and was all set...
Sent from my SPH-L900 using JellyBombed Tapatalk 2
To start off the kindle had an older version of twrp and had a version of ice cream sandwich. Those work correctly and it continues to work correctly after a nandroid restore.
Fast forward to now, I installed the latest twrp and flashed the latest FFF v1.5 bootloader.
I flashed this CM11 nightly cm-11-20140702-NIGHTLY-otter.zip
and flashed latest gapps gapps-kk-20140606-signed.zip
After I finish flashing everything I can setup the kindle but once I reboot it goes into a bootloop at the CM logo that results in a colorful screen. If I power off and power on it just bootlopps at the CM logo. Not sure what else I can do. Any help is appreciated.
Forgot to add. I have tried flashing Pacman rom: pac_otter-nightly-20140701.zip and I get same results as above.
Verify md5 for rom and gapps after downloading?
[How to] Verify that your download is complete with MD5/SHA-1 Hash Checksums
try gapps-kk-20140105-signed.zip
---------- Post added at 07:30 PM ---------- Previous post was at 07:30 PM ----------
newer is not always better
Dirty flash or clean?
Sent from my Nexus 5 using XDA Free mobile app
sd_shadow said:
Verify md5 for rom and gapps after downloading?
[How to] Verify that your download is complete with MD5/SHA-1 Hash Checksums
Click to expand...
Click to collapse
Matching md5 for the roms and gapps
sd_shadow said:
try gapps-kk-20140105-signed.zip
---------- Post added at 07:30 PM ---------- Previous post was at 07:30 PM ----------
newer is not always better
Click to expand...
Click to collapse
Going to try with these
dokie80 said:
Dirty flash or clean?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
It's always been a clean flash
On a side note installing a jelly bean rom works fine and I can reboot without a problem.
JJsevol said:
Matching md5 for the roms and gapps
Going to try with these
It's always been a clean flash
On a side note installing a jelly bean rom works fine and I can reboot without a problem.
Click to expand...
Click to collapse
If u install JB with out problem with the same twrp, then ur twrp is twrp6?
Afaik, kitkat need twrp7, JB need twrp6.
I had bootloop when I flashed JB with twrp7. Check ur twrp version?
Sent from my Nexus 5 using XDA Free mobile app
dokie80 said:
If u install JB with out problem with the same twrp, then ur twrp is twrp6?
Afaik, kitkat need twrp7, JB need twrp6.
I had bootloop when I flashed JB with twrp7. Check ur twrp version?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
That is what I was thinking, recheck twrp version
dokie80 said:
If u install JB with out problem with the same twrp, then ur twrp is twrp6?
Afaik, kitkat need twrp7, JB need twrp6.
I had bootloop when I flashed JB with twrp7. Check ur twrp version?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
sd_shadow said:
That is what I was thinking, recheck twrp version
Click to expand...
Click to collapse
Never thought about that. I just downloaded the version in the twrp thread.
OK so I have twrp 2.7.0.1. Here's the screenshot in recovery. Does your twrp look like that because my other twrp on other devices look different logo wise.
JJsevol said:
OK so I have twrp 2.7.0.1. Here's the screenshot in recovery. Does your twrp look like that because my other twrp on other devices look different logo wise.
Click to expand...
Click to collapse
that should be fine, unless it did not install correctly. try the 2.7.1.0 zip version zip-openrecovery-twrp-2.7.1.0-otter.zip Install in old TWRP>wipe cache and dalvik>reboot
sd_shadow said:
that should be fine, unless it did not install correctly. try the 2.7.1.0 zip version zip-openrecovery-twrp-2.7.1.0-otter.zip Install in old TWRP>wipe cache and dalvik>reboot
Click to expand...
Click to collapse
I installed this and same thing as before. Not sure what's going on, but ended up just using jb.
Still stuck at logo?
U need to inform ur version of bootloader, twrp, and which ROM u r trying to flash. Let us know the name of the file.
Did u wipe before flashing?
Twrp7 can't be use for flashing JB. U ending up using JB by flashing ur old twrp and ROM? Or by flashing via twrp7?
Last.. Are u sure u device is kindle fire original?
Sent from my Nexus 5 using XDA Free mobile app
dokie80 said:
Still stuck at logo?
U need to inform ur version of bootloader, twrp, and which ROM u r trying to flash. Let us know the name of the file.
Did u wipe before flashing?
Twrp7 can't be use for flashing JB. U ending up using JB by flashing ur old twrp and ROM? Or by flashing via twrp7?
Last.. Are u sure u device is kindle fire original?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Yeah still stuck at cm logo after powering back on or rebooting. File names are in the op but let me know if you need anything else. Clean instalI with a wipe. I even used the twrp version SD_shadow provided and I still installed KitKat and installed jb bit still see the issue. And positive to original kindle. I'm thinking I should make a video of my install process. Thanks for the help guys.
JJsevol said:
Yeah still stuck at cm logo after powering back on or rebooting. File names are in the op but let me know if you need anything else. Clean instalI with a wipe. I even used the twrp version SD_shadow provided and I still installed KitKat and installed jb bit still see the issue. And positive to original kindle. I'm thinking I should make a video of my install process. Thanks for the help guys.
Click to expand...
Click to collapse
No idea.. Sorry.
Anyway, if you successfully install JB with TWRP 7.. That's weird.
Sent from my Nexus 5 using XDA Free mobile app
dokie80 said:
No idea.. Sorry.
Anyway, if you successfully install JB with TWRP 7.. That's weird.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Here's a better look of twrp version and zips I have. Also the bootloader version is v1.5 not v1.4.
JJsevol said:
Here's a better look of twrp version and zips I have. Also the bootloader version is v1.5 not v1.4.
Click to expand...
Click to collapse
This is all with a full wipe including the system?
Thepooch said:
This is all with a full wipe including the system?
Click to expand...
Click to collapse
At first it wasn't. I was just doing the normal Factory Reset in twrp but on the last try I included system as well. Let me try again.
JJsevol said:
At first it wasn't. I was just doing the normal Factory Reset in twrp but on the last try I included system as well. Let me try again.
Click to expand...
Click to collapse
Full wipe recommended when changing a system. Wait for boot don`t be impatient.
Thepooch said:
Full wipe recommended when changing a system. Wait for boot don`t be impatient.
Click to expand...
Click to collapse
Doing that now. I don't have to flash the bootloader every time, right?
JJsevol said:
Doing that now. I don't have to flash the bootloader every time, right?
Click to expand...
Click to collapse
The bootloader gets flashed 1 time and 1 time only. Unless perhaps there is an upgrade you never do this in correlation with flashing a new ROM period.
---------- Post added at 11:01 AM ---------- Previous post was at 10:26 AM ----------
Swipe factory reset then go advanced select dalvik, cache, system then swipe again. Flash rom.zip, flash gapps.zip in zip form mind you then select reboot system.