Hello everyone, this is my first post. So recently I have been having a certain issue concerning my lockscreen bothering me. It really isn't a deal breaker, but it messes with my OCD. So at random times, the lock and message (life companion) on my lock screen shrink as shown in the attached image. It does not seem to do anything except for bother me. The lock screen does this unpredictably, but it does not do it often. I have tried a hard reset a few times and it does not fix it. It even fixes itself after a once again, random amount of time. I am not rooted, I use basic touchwiz, basically its how I got it out of the box with some games I installed through humble bundle. Any ideas?
Pr1m4lcur5e said:
Hello everyone, this is my first post. So recently I have been having a certain issue concerning my lockscreen bothering me. It really isn't a deal breaker, but it messes with my OCD. So at random times, the lock and message (life companion) on my lock screen shrink as shown in the attached image. It does not seem to do anything except for bother me. The lock screen does this unpredictably, but it does not do it often. I have tried a hard reset a few times and it does not fix it. It even fixes itself after a once again, random amount of time. I am not rooted, I use basic touchwiz, basically its how I got it out of the box with some games I installed through humble bundle. Any ideas?
Click to expand...
Click to collapse
It's a TW bug. It can also happen with the unlock "pad lock" icon that appears on the lock screen if you have no unlock effect enabled. It doesn't affect function and a restart fixes it. Happens to me maybe twice a month. Maybe it'll be squashed with the next official release. No biggie.
Related
Morning all. I have the Focus for about 12 hours now and enjoying the device, the OS, and the "experience". Will copy/paste, custom ring tones and a few other things be nice? Sure...but hey, we lived without them on the iPhone for a year or more, so I'm sure the expected 2 months until they arrive will breeze by.
Quick annoyance - I'm finding a "lag" when I unlock the screen. I'm home right now connected to my WiFi and whenever I unlock the screen...it is laggy....there is a delay when I type-in my unlock password, which is causing me to make a mistake and have to re-type it. Then, even after it unlocks, for another few seconds there is a delay from when I touch the screen until when anything happens. But then - boom - it's blazing fast again and all is good.
I wonder if this is just an issue with the fact that I lock the device and have to enter a password? Anyone else seeing this issue? It's rather annoying because it totally kills productivity when trying to "get in and get out" quickly.
Thanks!
No lag on the HD7, and I have a password set up as well (stupid Exchange policy).
-R
adamzeit said:
Morning all. I have the Focus for about 12 hours now and enjoying the device, the OS, and the "experience". Will copy/paste, custom ring tones and a few other things be nice? Sure...but hey, we lived without them on the iPhone for a year or more, so I'm sure the expected 2 months until they arrive will breeze by.
Quick annoyance - I'm finding a "lag" when I unlock the screen. I'm home right now connected to my WiFi and whenever I unlock the screen...it is laggy....there is a delay when I type-in my unlock password, which is causing me to make a mistake and have to re-type it. Then, even after it unlocks, for another few seconds there is a delay from when I touch the screen until when anything happens. But then - boom - it's blazing fast again and all is good.
I wonder if this is just an issue with the fact that I lock the device and have to enter a password? Anyone else seeing this issue? It's rather annoying because it totally kills productivity when trying to "get in and get out" quickly.
Thanks!
Click to expand...
Click to collapse
don't have that problem i had not used the pasword on lock screen but just added one and there is no lag on entering home screen nor ehtering any app. have you added extra memory?? if so maybe its what is causing the problem.
It must be your device. I have focus and no lag here. I would try rebooting the phone. Maybe something happened. lol.
Hey guys,
I've been having issues with the Widgetlocker lockscreen recently, and was wondering if any of this will ring a bell with someone.
I recently flashed the KJ2 2.3.5 ROM (the XEU non-wipe Frankenstein one), and i've also flashed CF-Root and then the Speedmod kernel. I'm in the UK, on O2 (debranded to XEU) and i have no issues with the phone whatsoever. I even get great battery life. It's just this damn widgetlocker issue that's grating on me!
For some reason when i wake the phone up and try to unlock it by using the slider (i just use the default 'Android' one for unlocking - the only other things i have are a couple of widgets for missed calls & texts and a battery % one) a lot of the time the slider does not repond to touch. It doesn't always happen, but maybe a good one out of every three times it happens. And the weird part is, if i then just wait about 5 seconds, then it suddenly responds and i can unlock the phone. Obviously having another 5 seconds on top of the already present lag when pressing the home button is not good, and because of this i'm thinking of not using WL anymore.
I've been through all of the settings, i'm almost 100% sure it's not something in there. Can anyone help with this?
Cheers guys.
Happens with me too sometimes. Another issue is if you keep pressing Menu button 4-5 times the phone gets unlocked and takes you to the home screen.
Hey, just wanted to post that i finally figured out what the problem was.
I'm using an .apk to help with the touchscreen sensitivity. See vitalij's thread here:
http://forum.xda-developers.com/showthread.php?p=18999801#post18999801
Well it turns out on 2.3.5 vitalij's .apk has some issues with the most up-to-date superuser. The solution, so far, isn't great but gets the job done, is to uninstall the .apk, and then re-install. The important part is not to click on 'enable service' in the app! So basically each time you want to use the app you have to open it and hit 'apply' on whatever setting you need. The setting will work until you next turn the screen off. For me this workaround is actually ok, as the only time i ever really used it was for the odd game, so i'm happy to just do it manually on these occassions.
disable root helper
madrano, can you expand on what you mean by this? i have tried enabling & disabling root helper but if i remember correctly the problem was still there.
Problem summary
Known cause (might be others): selecting an app from the Recents list (Task Switcher)
Temporary fix: turn the screen off, then back on
Workaround: avoid using Recents list (you can use a 3rd party task switcher instead)
How to test: open Messaging, hit Home, hit Recents, select Messaging from the list. Your screen will be less sensitive until you turn the screen off and back on. You can view the pressure by going to Settings -> Developer Options -> turn on Pointer Location. This will allow you to see the Prs of each tap in your status bar. Normally your lightest taps that register will show anywhere from 0.28 to 0.32. However, after this bug is activated, you will mostly get values over 0.40 for your light taps. This is actually a very noticeable increase, especially when trying to type quickly.
Please report any other known methods to "activate" this bug. After re-assigning my Recents button to a 3rd party app (I'm using Simple Task Switcher), I haven't seen this bug at all. It seems that a couple of people have seen it produced by something other than Recents, but they haven't narrowed it down (or reliably reproduced it on purpose).
Please star this issue officially so Google can fix:
Link is http://code.google.com/p/android/issues/detail?id=29734
Note: Downloading & using Screen filter application from play store, with brightness set to
Your hands are really dirty or really dry. Try moisturizer or something.
Been using my screen for almost hour straight now. No issues.
--------+++--------
iphone. helping computer illiteracy become popular since 2007.
Hehe yes this s gonna be a difficult one to confirm. But it is definitely not dirty hands. To clarify, a quick press of the power button to lock then unlock completely fixes the issue. Same fingers suddenly register perfectly. This is driving me nuts as the phone is not even usable right now. Literally.
@rbiter said:
Been using my screen for almost hour straight now. No issues.
--------+++--------
iphone. helping computer illiteracy become popular since 2007.
Click to expand...
Click to collapse
ios 6.2 doesnt get issues.
I don't know about your other experiences, but as far as the browser goes I have the same scrolling effects as you do. I think this is how it is meant to be. They tightened the scrolling a lot and I kinda like it. Before one small flick would send me across the whole page, which was kinda annoying. Just my preference.
I'm not having this problem. It would drive me crazy too. Been using my phone alot over the past two days and I didn't run into this problem even after almost 1h of continuous surfing. Also a few checkpoints of Shadowgun didn't trigger it.
But you can confirm your problem if you enable "cursor position" in the dev options (hope that's what it 's called in english). "Prs" and "Size" should need a lot more than around 0.30-0.40 to register your touch if you have the problem you describe.
I am sorry that you're experiencing this, but 4.0.4 has nothing to do with this. 4.0.4 is just software, Galaxy Nexus is not a pressure-sensitive device, it is merely touch-sensitive. Which means that software gets an analogue signal from the touchscreen, either 1 or 0. It has no 'range' of sensitivity, so it cannot decrease in sensitivity in software (if it did, then it would not work at all).
This is entirely hardware issue and I suggest either making sure your screen is clean, your screen protection thing (if you use one) isn't acting up or if your hardware has become faulty (have you dropped it recently?).
If problem persists then return under warranty.
My wife had this issue once.
It was the third party launcher she was using.
I don't think its a matter of touch sensitivity dropping, its a matter of the system just being too slow to really work right.
It was ADW EX, fwiw.
kristovaher said:
I am sorry that you're experiencing this, but 4.0.4 has nothing to do with this. 4.0.4 is just software, Galaxy Nexus is not a pressure-sensitive device, it is merely touch-sensitive. Which means that software gets an analogue signal from the touchscreen, either 1 or 0. It has no 'range' of sensitivity, so it cannot decrease in sensitivity in software (if it did, then it would not work at all).
This is entirely hardware issue and I suggest either making sure your screen is clean, your screen protection thing (if you use one) isn't acting up or if your hardware has become faulty (have you dropped it recently?).
If problem persists then return under warranty.
Click to expand...
Click to collapse
Lol that is hilarious. You forgot the step where its the OS that actually processes the input data, so in that process, a ton of problems can arise.
And personally, since 4.0.4 I have also been experiencing a "similar" issue. When scrolling down (and only down), I experience a kind of "lag" like if it only registers the swipe movement half an inch lower. Its not a big deal, but still an issue.
Edit : What he explains as "pressing very hard" is most likely the fact that when you press harder you actually cover more surface, so the amount of extra input data can definitely impact the behavior.
I had issues for a few hours after the 4.0.4 update, where my softkey buttons weren't responding. Thankfully, it seems to be fine now, but it was a cause for concern.
Sent from my Galaxy Nexus
gokpog said:
I'm not having this problem. It would drive me crazy too. Been using my phone alot over the past two days and I didn't run into this problem even after almost 1h of continuous surfing. Also a few checkpoints of Shadowgun didn't trigger it.
But you can confirm your problem if you enable "cursor position" in the dev options (hope that's what it 's called in english). "Prs" and "Size" should need a lot more than around 0.30-0.40 to register your touch if you have the problem you describe.
Click to expand...
Click to collapse
Thank you my friend, I should have thought of this; now I have numbers to confirm this. So with cursor option enabled I can get down to 0.30, managed 0.28 once. However when the bug starts, I can confirm that I cannot get below 0.60. It just refuses to register that input for some reason.
I lock the screen, 1 second is all it takes, and now it registers down to 0.30 again and all touch works properly. Its almost like some type of memory leak issue is the way it feels to me. It only starts happening after a few min of use.
Its definitely an issue now that I can see the pressure numbers. The question is what the hell can I do about it. I flashed aokp29 with the latest 4.0.4 ota merged in, problem still occurs. I'm gonna try stock 4.0.2 or 4.0.1 just to see. Thanks.
I have never had much luck upgrading Linux versions. That's why I start fresh every time with Android. Lol
Sent from my Galaxy Nexus using Tapatalk
Before I start digging, anyone know specifically which driver controls the touch input? I'll try looking thru github.
Also I was on stock 4.0.1 prior to this. So this could be normal behavior for everyone but everybody is used to it since nobody stayed on 4.0.1 like me. Cause I can easily say this is difficult to notice if you aren't paying attention. The question is, why does locking the screen temporarily change it back...
I can confirm some of what you are saying..sometimes when I'm browsing the scrolling tightens up..I lock the phone then unlock it and it is smooth again..doesn't happen all the time tho..doesn't bother me but I've noticed it
Sent from my Galaxy Nexus using XDA
I can also confirm. This morning I found the Swiftkey was lagging on Facebook. Something like the phone did not receive the touch. Then I rebooted and now it is ok.
I did not get this issue on 4.0.2 and I don't install anything new on 4.0.4.
The way I installed 4.0.4 was from the official factory image, so my phone is fresh! I reinstalled all apps manually as well. Nothing fancy apps.
I know this is my first post, but I can definitely confirm this issue.
I use my Galaxy Nexus for development, so the screen is always on. The sensitivity goes down very quickly.
My phone was an International GNEX that I loaded the US firmware on and then I flashed the OTA 4.0.4 update.
kristovaher said:
I am sorry that you're experiencing this, but 4.0.4 has nothing to do with this. 4.0.4 is just software, Galaxy Nexus is not a pressure-sensitive device, it is merely touch-sensitive. Which means that software gets an analogue signal from the touchscreen, either 1 or 0. It has no 'range' of sensitivity, so it cannot decrease in sensitivity in software (if it did, then it would not work at all).
This is entirely hardware issue and I suggest either making sure your screen is clean, your screen protection thing (if you use one) isn't acting up or if your hardware has become faulty (have you dropped it recently?).
If problem persists then return under warranty.
Click to expand...
Click to collapse
Just to point out, the phone is all digital. It does not get an analog signal from touching the screen. Also to that point you said analog but then described digital with the 1 and 0
Has anyone affected tried going between 4.0.2 and 4.0.4? To check the possibility of a driver or some related value changing.
Also, if not fixed by going back to 4.0.2, this could be due to current leakage from somewhere causing the touch to not work properly. I've seen it on other capacitive touch devices, though mainly when a non-compatible charger is connected. When you shut the screen off, the charge causing the problem/interference with the touch is temporarily dissapated, but then comes back after you use it again. Probably very unlikely in this case, unless Google changed something in the touch driver that makes it more sensitive to interference, which in turn messes with actual input from fingers.
TechNoir said:
Has anyone affected tried going between 4.0.2 and 4.0.4? To check the possibility of a driver or some related value changing.
Also, if not fixed by going back to 4.0.2, this could be due to current leakage from somewhere causing the touch to not work properly. I've seen it on other capacitive touch devices, though mainly when a non-compatible charger is connected. When you shut the screen off, the charge causing the problem/interference with the touch is temporarily dissapated, but then comes back after you use it again. Probably very unlikely in this case, unless Google changed something in the touch driver that makes it more sensitive to interference, which in turn messes with actual input from fingers.
Click to expand...
Click to collapse
Its possible. I was on 4.0.1 so perhaps this issue originated in 4.0.2 but I never noticed since I didn't update then. I can add that I did multiple wipes and clean flashes, and also tried both aokp 28 and 29 (new 4.0.4 ota merged), and happened on both.
I'll post what I just sent to arbiter which gives more insight.
From my extra testing under normal use my light touches register 0.28-0.33. Especially on swipes, the end of the swipe registers 0.28 as the finger travel breaks contact with the screen giving that swipe extra input which pushes the swipe motion further extra boost. When the bug starts the touch swipe won't even break 0.38-0.40, and that extra swipe data is lost resulting in the end of the swipe data points being excluded and swipes travel half the distance.
This gets exacerbated on the keyboard when fast typing light pressed. Its so bad it frustrates my face off cause typing just ceases to be possible. Such a difficult issue to diagnose.
Click to expand...
Click to collapse
Yes my face literally flew off!
I've been reading through the previous threads and I'm still confused if the issue is hardware or software related. I have the AUO panel and have broken swipes, and times where I can't scroll properly. This has been going on a couple months now and it's getting on my last nerve since it's frequently happening when I need my phone to work properly. All this time I assumed it was software but a couple threads mentioned it was hardware. Trouble is, some people with the JDI screen also have issues so I don't understand. My question is, has anyone ruled out software by flashing an AOSP rom? I'd rather not send this to Sony if at all possible since they don't cross ship and I'd be without a phone.
I have rarely an issue with the touch screen, when swipe up or down, it doesn't swipe it acts like I've just touched (clicked) once the display. I think it is a software issue, because in my case, if I turn off the display wait for 2-3 seconds and turn it on, it works with no problems.
Can you point me please to other threads that have this issue in discuss?
Thank you!
Have you removed the asf from the screen and placed an actual screen protector on it? I found that this really helped with the weird screen issues.
I have a screen protector over the ASF. But that has nothing to do with my issue, because, like I said, when I turn the display off, wait 3 seconds, and on again everything is working normally.
vibecatalin said:
I have a screen protector over the ASF. But that has nothing to do with my issue, because, like I said, when I turn the display off, wait 3 seconds, and on again everything is working normally.
Click to expand...
Click to collapse
Yeah, I reboot usually and the issue temporarily goes away. Then it will come back a day or two later. I'm afraid to remove the ASF because I've read some issues with goes touches even with a screen protector. I just want the issue to be fixed... I was thinking of flashing a AOSP rom but wanted to see if anyone with that ROM had any trouble or not. Maybe the L update in January will fix things.
Here are the resources I've read on this issue:
http://talk.sonymobile.com/t5/Xperia-Z1-Compact/Touchscreen-loosing-touch-issue/td-p/580111
http://johnhaller.com/blog/2014-03-06--sony-xperia-z1-z1s-touch-screen-issue
http://forum.xda-developers.com/showthread.php?t=2770293
I have rarely that issue, like I said I just turn off the screen, and after 2-3 seconds turn it on and it's gone. I'm sure this is a software related issue.
If it helps at all, I never had the issue in the two weeks I tried an aosp rom. However the camera and battery life were a bit lacking so I'm back on a stock rom.
I haven't have the issue too in the past weeks, I've wiping cache and dalvik cache pretty often , because I've installed some system apps. Anyway I will really want to know the cause of this
L.E. I'm still on stock firmware.
L.E. 2 : The Glove mode function, in the Settings-Display menu has an application or something? Has a file redirected to it? Is there in the phone's system a file than can be edited or deleted or something for the glove mode function? Maybe we will find answers there.
I'm not sure that I've made myself understood with the question.
Been using the phone for the last 12 hours and I noticed something towards the end of my use last night.
The screen seemed to become unresponsive. And when it would work it would start to make its own input when scrolling and opening any app or link my finger would drag over while scrolling.
Changed refresh rates, changed resolutions, even seen if the blue light filter was the issue. Nothing.
Almost seems like the screen drops frames when scrolling, like it gets caught on something.
New development. Fingerprint sensor doesn't respond at all and inputting a pattern is damn near impossible. Going to try removing the screen protector to see if that could also be the issue
Did a factory reset
Issue seems to be where the finger print scanner is
It's almost like a dead or unresponsive zone.
Sounds like a factory defect, better have it replaced if resetting didn't worked.
Small video showing when scrolling over the fingerprint reader, the screen almost loses input
Defect.
Samsung has been little help lol. They want me to send it in for repair instead of an exchange. They also said to just order a whole new one and return the one I have now except the black 128 is sold out
imtjnotu said:
Samsung has been little help lol. They want me to send it in for repair instead of an exchange. They also said to just order a whole new one and return the one I have now except the black 128 is sold out
Click to expand...
Click to collapse
Sounds like Samsung support LOL...sorry you're having issues
Did you remove the factory installed screen protector? Maybe it's the cause of the issue
Return that pal, that doesn't sound good at all.
lovers74 said:
Did you remove the factory installed screen protector? Maybe it's the cause of the issue
Click to expand...
Click to collapse
one of the first things i did to trouble shoot. still having the issue. sometimes the screen completely loses all touch registration and it doesnt even know im trying to swipe or push on things. just realized it did this also after tmobiles new software update.
im still waiting here to hear back from samsung on how they are going to fix this issue
The same thing happens to me. Pulling down the notification shade seems to be the only thing that still works. It seems to goose the phone and it starts working again.
Test using the *#0*# diagnostic menu and use the Touch test.