OK I got the phone flashed over to Page Plus. But for the life of me I can't get into EPST ##3282#. No matter what I do the keypad dialer will not open this menu.
YouTube & Play Store will not work over data.
I'm on Freeza stock MD4 rom . Stock phone keypad
I googled and I've read that the ###3282# code was blocked in the MD4 update. So I'm assuming that I need to flash a rom that was b4 the MD4.
Could someone please tell me what rom I'm looking for?
Or unless someone knows a different way to get into EPST?
Thanks a million
Sent from my EVO using Tapatalk 4
My SPH-L710 was flashed to pageplus 4 days ago. What i had to do, was go to a stock, unrooted rom, let them do the flashing process, and then restore a nandroid of a different rom. I do not suggest rooting the stock rom after the flash, because it broke my wifi. I did a factory reset using Philz CWM, i wiped the dalvik cache. I rebooted the phone, rerooted, and rebooted. Still no wifi with stock MD4 that was rooted using the GS3 all in one tool.
I restored a nandroid of The Peoples Rom, and Mother of all Roms. My calls, texts, and 3G data all work with both roms. I do not know about MMS, because i do not use MMS. TPR and MOAR are both prerooted ROMs.
scoot0073 said:
OK I got the phone flashed over to Page Plus. But for the life of me I can't get into EPST ##3282#. No matter what I do the keypad dialer will not open this menu.
YouTube & Play Store will not work over data.
I'm on Freeza stock MD4 rom . Stock phone keypad
I googled and I've read that the ###3282# code was blocked in the MD4 update. So I'm assuming that I need to flash a rom that was b4 the MD4.
Could someone please tell me what rom I'm looking for?
Or unless someone knows a different way to get into EPST?
Thanks a million
Sent from my EVO using Tapatalk 4
Click to expand...
Click to collapse
If you decide to go the earlier version (before MD4) route go to Billard412's thread. One flash solution. Read the OP carefully.
Billards412's thread here:
MD4, MD1 for both 16 & 32 gb versions
Here:
http://forum.xda-developers.com/showthread.php?t=1904099
Nearly Last page of Billard's thread
LJ7 for both 16 and 32 gb versions Here:
http://forum.xda-developers.com/showthread.php?t=1904099&page=62
BE SURE to give billard thanks for the work he's done!
Do you know which version came on this phone 16gig?
That Billards412 offers
Thanks
sent from my HTC Evo LTE cm10.2
scoot0073 said:
Do you know which version came on this phone 16gig?
That Billards412 offers
Thanks
sent from my HTC Evo LTE cm10.2
Click to expand...
Click to collapse
This thread http://forum.xda-developers.com/showthread.php?t=1904099 has a stock MD4 that also resets your flasg count. Not that the second part matters in this case. The ROM is confirmed to be stock, unrooted, and MD4 update. No surprises like messed up features or random reboots. Its a clean MD4. I would suggest making sure you have a nandroid for whatever ROM you want to use as your daily driver. So, nandroid your daily driver, go back to stock, and then restore your nandroid. Thats that i did. my talk, text, and 3G work. As far as i know, switching ROMS DOES break MMS. Of you cannot live without MMS, im afraid youll have to remain stock as far as i know. The person that flashed my GS3 wrote their own software, and has years of experience in the business. I am not saying he knows every trick, but ive been told that it is impossible to properly flash the GS3 while it has a ROM with certain custom features, or OC/UC.
Thanks, I done flashed like 4 different roms since the Page Plus flash and everything still works sms/mms/3g on each one. Her daily driver is Cm10.2 on this phone.
The guy told me if I flash a rom avoid firmware as that would wipe or corrupt the Page Plus flash. And he would charge me to have a refreshing.
He got everything flashed except he couldn't get into the ##3282# to program whatever he needed to in there.
sent from my HTC Evo LTE cm10.2
But I get home and flash a stock unrooted rom via recovery hopefully to see if the ##3282# works if so then take it back so he can finish
sent from my HTC Evo LTE cm10.2
Related
Just installed CM10.0 on my phone. I used the sprint version, but have a problem.. I do not have any service data or mobile.. is there a way to update your profile like you do with the normal rom that came on the phone, so I can get my service.. Thanks
Also having the same issue. I was gonna post a thread but I figured I'd just search for it when I get home.
That way I don't get yelled at by the forum trolls.
Sent from my Sprint Galaxy S3 using xda premium
You cant update profile on an AOSP (android open source project) rom. Try flashing the CM10 rom again, but this time wipe everything a couple more times before you do that
Sent from my PG06100
To update PRL and Profile you need to nandroid you cm10 flash TW rom update both then restore your nandroid.
I like to break stuff!
doubledragon5 said:
Just installed CM10.0 on my phone. I used the sprint version, but have a problem.. I do not have any service data or mobile.. is there a way to update your profile like you do with the normal rom that came on the phone, so I can get my service.. Thanks
Click to expand...
Click to collapse
eyeisdasteve said:
Also having the same issue. I was gonna post a thread but I figured I'd just search for it when I get home.
That way I don't get yelled at by the forum trolls.
Sent from my Sprint Galaxy S3 using xda premium
Click to expand...
Click to collapse
As was stated, to update profile/prl, when on an AOSP rom, you have to flash back to a TW rom, perform the action, and then flash to your preferred AOSP rom. If you're using a slightly older AOSP rom, you may want to search for the Sprint data handoff link and download it, save it as you would other root files, and flash it after flashing your preferred rom and kernal. I've found the data handoff fix to be very helpful, especially since I'm in a fully lit LTE area.
Good luck.
Ok so this is my first post but have been lurking around these parts for years, and am no stranger to Rooting phones or flashing ROMs and Kernels. Can't post directly to the Wicked Sensations thread so I'm hoping to get some advice 'cause I'm stumped...
I've been running Wicked Sensations ROM MD4 V5.0 for months and decided to Check out the new TW4.3 MK3 Version.
Followed directions... backed up onto my external SD..... did a full wipe (System, Data, Dalvik, Cache)....and flashed WickedSensations_MK3_BETA_v.01.zip.
Everything appeared smooth.... rebooted system....and then,,,,,,
Phone boot loops between the Samsung splash and Galaxy Siii screens.
I'm able to get into recovery...TWRP 2.6.3.0... tried to restore my backup however the same bootloop scenario plays out.
Any assistance would be greatly appreciated. Thanks in advance.
MeAtKeRtN said:
Ok so this is my first post but have been lurking around these parts for years, and am no stranger to Rooting phones or flashing ROMs and Kernels. Can't post directly to the Wicked Sensations thread so I'm hoping to get some advice 'cause I'm stumped...
I've been running Wicked Sensations ROM MD4 V5.0 for months and decided to Check out the new TW4.3 MK3 Version.
Followed directions... backed up onto my external SD..... did a full wipe (System, Data, Dalvik, Cache)....and flashed WickedSensations_MK3_BETA_v.01.zip.
Everything appeared smooth.... rebooted system....and then,,,,,,
Phone boot loops between the Samsung splash and Galaxy Siii screens.
I'm able to get into recovery...TWRP 2.6.3.0... tried to restore my backup however the same bootloop scenario plays out.
Any assistance would be greatly appreciated. Thanks in advance.
Click to expand...
Click to collapse
You might have to Odin back to md4 to get your phone back to where you can restore your backup
[ROM][ODIN][TAR]SPH-L710 MD4 (MD4 Modem/Kernel/ROM - Stock)
jdelano said:
You might have to Odin back to md4 to get your phone back to where you can restore your backup
Click to expand...
Click to collapse
Yeah I was afraid that might be the case.... is ADB sideload an option?
MeAtKeRtN said:
Yeah I was afraid that might be the case.... is ADB sideload an option?
Click to expand...
Click to collapse
I'd Odin, there is a pre rooted option.
then restore wicked.
might try to download 4.3 again if you want to try it.
you used a 4.3 rom that still used the md4 firmware, right? (nm: I see the zip name)
jdelano said:
I'd Odin, there is a pre rooted option.
then restore wicked.
might try to download 4.3 again if you want to try it.
you used a 4.3 rom that still used the md4 firmware, right?
Click to expand...
Click to collapse
Correct. No 4.3 firmware... KNOX free.
I'm downloading the pre rooted, no data Odin version now and will attempt a restore of wicked once I can boot up again. Thanks for the link and the help.
MeAtKeRtN said:
Correct. No 4.3 firmware... KNOX free.
I'm downloading the pre rooted, no data Odin version now and will attempt a restore of wicked once I can boot up again. Thanks for the link and the help.
Click to expand...
Click to collapse
The way I did mine today I saved everything I could to my computer. .. then not only did I do a factory reset and wipe the caches I also formatted the internal memory because of all the issues I've heard of and also experienced. Other than that I didn't do anything special. ..Please let us know if you get it back up.
http://i.imgur.com/qrByUGN.jpg
Worked like a charm. :laugh:
incompatible noertsus
bigpappags3 said:
The way I did mine today I saved everything I could to my computer. .. then not only did I do a factory reset and wipe the caches I also formatted the internal memory because of all the issues I've heard of and also experienced. Other than that I didn't do anything special. ..Please let us know if you get it back up.
Click to expand...
Click to collapse
Got WIcked MD4 back up with all my data intact... only wifi wasn't working at all with the ROM. Thought maybe it was an issue with the stock kernel or modem via Odin... so i flashed Ktoonsez and Mk3 like I was running up until this morning... wiped cache and dalvik... Got hung up on my custom boot img for 10 min and couldn't get her to boot up. Trying a restore again now. Hopefully 3rd times a charm.
I was able to get Wicked MD4 back up but can't seem to get Wif to work. Any ideas on how I might remedy?
Sent from my SPH-L710 using xda app-developers app
MeAtKeRtN said:
I was able to get Wicked MD4 back up but can't seem to get Wif to work. Any ideas on how I might remedy?
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
you might try to forgot the network (press and hold on the name, then select forget) and then connect to it again.
Did you check your md5 on your download to make sure you didn't get a bad download of mk3 Rom?
Yeah turns out it was a bad download of the WS MK3 Rom from the other morning that set problems off. After a few tedious hours flashing kernels and modems and some trial and error I was able to stabilize and back up a full working nandroid of the MD4 setup.
Flashed Wicked SensTW4.3 MK3 with Decimalmans TW kernel yesterday and I'm really feeling it... super stable for a 1st Beta release. Barring a cpl random app fc's and the fact I can't seem to figure out how to install a wallpaper onto the lockscreen.. it's badass. MAD props to Dazed and Team Wicked on the ROM.. it far exceeds my expectations and am fired up to see where it progresses from here. Thanks for your hard work and efforts to impress us....
Happy Xmas all...
Sent from my SPH-L710 using xda app-developers app
Coming from OSE 4.4 build, I flashed to Skynote 4.3.. after flashing my wifi wouldnt work, so flashed a DevilKernel. That fixed the wifi, but my SMS is not working. I tried flashing back to OSE, CM11, CM 10.2, and even factory restore through CWM and still SMS not working!
Im starting to freak out a little here
Can someone please help me troubleshoot this?
Another strange thing... I got a couple of group SMS messages to go through..
Might want to look at your apn setting...
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Shainsaw said:
Coming from OSE 4.4 build, I flashed to Skynote 4.3.. after flashing my wifi wouldnt work, so flashed a DevilKernel. That fixed the wifi, but my SMS is not working. I tried flashing back to OSE, CM11, CM 10.2, and even factory restore through CWM and still SMS not working!
Im starting to freak out a little here
Can someone please help me troubleshoot this?
Click to expand...
Click to collapse
Dude, it's amazing anything is working with all the flashes and different flavors.
Try taking it down to bare bones.
Maybe flash Philz Touch Recovery, do a new ROM wipe.
Try flashing
AT&T UCUBMK6 i317 *Odexed* Stock CWM Note 2
from here
http://forum.xda-developers.com/showthread.php?t=2589891
You've left out tons of info for anyone to really help,
What carrier, what modem, what are you on now .......
dicksteele said:
Dude, it's amazing anything is working with all the flashes and different flavors.
Try taking it down to bare bones.
Maybe flash Philz Touch Recovery, do a new ROM wipe.
Try flashing
AT&T UCUBMK6 i317 *Odexed* Stock CWM Note 2
from here
http://forum.xda-developers.com/showthread.php?t=2589891
You've left out tons of info for anyone to really help,
What carrier, what modem, what are you on now .......
Click to expand...
Click to collapse
This^^^^ HERE:thumbup::thumbup:
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
SOLVED!!
Its amazing that people jump in on conversations to just to flame~~~
What carrier do you think im using? Where did I post this? I've flashed my phone with a total of probably 10 CFWs. Way less than a majority of people... so I AM surprised when it gets jacked up.^^
Anyways, here is the solution that worked for me:
Reset the SMSC (http://wiki.cyanogenmod.org/w/SMSC_Updates)
Pulled the battery for 5 or so minutes, put it back, went to applications manager-->All Apps-->Messaging FORCE STOP and CLEAR DATA..
Hello Everyone,
I am having the weirdest issue, this has never happened to me before. Everytime i try to flash a custom rom it goes through and boots and everything runs smoothly but i have no service. When i check my device information in the settings menu my MEID is zeroed out as well as my prl, phone number, etc everything just turns to zeros. when i flash back to stock mk4 everything is back. I can flash any rom based off mk4 and everything will work fine. but any other rom aosp, cyanogenmod, etc i get zeroed out. anyone know what the issue may be or how i can prevent this from happening. I have tried multiple roms all have the same issue.
First check the obvious and make sure you are flashing the correct AOSP ROM for the Sprint Note 2 aka SPHL900.
If that's all good then you might need to start over and odin flash the stock MC2 with flash counter reset (found in development forum). After that use the Note 2 ToolKit found in original development forum and reroot your phone with it. At the same time you will also need to make sure you choose the ALL IN ONE (root, insecure boot image & recovery) option. Once you complete this you will want to immediately flash a current recovery such as Phil's 6.07.9 so have that zip already on your memory card before you start anything. Once you have a current 4.3 compatible recovery then reboot the stock rooted MC2 and immediately go to dialer and dial ##72786# to do a hands-free activation. This will ensure all your phone's provisioning is done before going to a different rom. Once that's done you can flash your rom of choice. Done
FYI: AOSP ROMS have specific instructions for install and initial setup so follow the OP's instructions. Also you must SKIP the phone activation portion upon initial setup of some AOSP ROMS. I just wanted to point that out in case you didn't know.
Your lucky that happen to my phone but the stuff don't come back . So now i have a mini tablet
Sent from my LG-LS980 using XDA Premium 4 mobile app
I have tried these things and still the same issues.
bonebeatz1234 said:
Your lucky that happen to my phone but the stuff don't come back . So now i have a mini tablet
Sent from my LG-LS980 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
threesix10 said:
I have tried these things and still the same issues.
Click to expand...
Click to collapse
try installing LJ4 and then re-flashing. MD4 caused that issue for me. Check my post in this forum too, and add your results.
Hi guys, sorry if this is stupid. I've flashed ROMs to 3 or 4 phones before this one and didn't have any issues with them, but this time around it doesn't seem so easy. My phone is a virgin mobile galaxy s2 (d710)
My phone has been rooted for a while and my stock ROM started randomly freezing up on me 4-5 times/day, so I finally decided to flash a ROM. The stickied post says to use odin mobile to flash to GB - EL26 Stock w/ CWM then to flash the ROM I want. Any ROM I tried flashing gave a status 7 error and aborted, EXCEPT for one ROM, and on that one I didn't even have working 3G? I believe this thread implied doing it any other way would be a hard brick.
I finally ended up using samsung's official upgrade tool in download mode to flash back to stock ROM, but it would be nice to get a custom on now that I've put time into it.
Can anyone point me in the direction I need to go?
Thanks
EDIT: I'm currently on the 4.1.2 stock ROM
http://forum.xda-developers.com/showthread.php?p=50070702
I'm guessing you're trying to flash a KitKat ROM? Using Mobile Odin and EL26CWM will work when flashing 4.2.2 (and under) ROMs, but not KitKat. You'll need the last Blasphemy 6.6 kernel (just for the updated ClockworkMod), located in Original Development, for that.
In your case, you'll probably want to flash FJ12 or FL26 (if you can find it) modem zips, as you're on Virgin Mobile, and those are ICS Virgin Mobile modems, which you'll need to have working data/internet on Any AOSP ROM (JB modems won't work).
And this guide is assuming you're completely stock JB firmware, not rooted.
Sent from my SPH-D710 using Tapatalk
It looks like I'm on GB28 stock. I think agats caused a soft brick. I'm reflashing back to stock again now....I don't know what's going on with this phone.
Edit: Retried, got it to work this time. Thanks.
Is there a reason why you have to flash one recovery just to move onto another one? Would any recovery work installing any ROM? I'm a bit confused by all these different recoveries, since my last phone only needed one.
InfamousMyzt said:
It looks like I'm on GB28 stock. I think agats caused a soft brick. I'm reflashing back to stock again now....I don't know what's going on with this phone.
Edit: Retried, got it to work this time. Thanks.
Is there a reason why you have to flash one recovery just to move onto another one? Would any recovery work installing any ROM? I'm a bit confused by all these different recoveries, since my last phone only needed one.
Click to expand...
Click to collapse
On this device, recovery comes bundled with the kernel. When you flash a ROM or kernel, the recovery that was on gets overwritten by the recovery that comes with the ROM/kernel you're flashing.
The reason everybody started using EL26CWM (gingerbread kernel) was due to a bug in the stock ICS firmware that was causing some people's devices to be permanently bricked when doing a factory reset.
Status 7 error when flashing is usually due to using a recovery that's too old.
So to answer your question... No, there is no "be-all, end-all" recovery for this device. Sorry [emoji20]
Glad you got it working though
Sent from my SPH-D710 using Tapatalk
Thanks for the help. Now that I'm running CM11, I don't have visual voicemail and it looks like I can't receive MMS.
Serious props to the people that use custom ROMs that aren't driven insane by bugs, I'm irritated by it already.
Know of any fix?
I don't know about visual voicemail... I'm flashed to Cricket and just use the built-in voicemail statusbar notification. Have you tried pushing the apk manually? I'm pretty sure I've seen Virgin Mobile fixes here in the d710 forum.
As far as MMS goes, have you tried messing with the APN's? I don't think MMS will work as-flashed, out-of-the-box for you without modifying them for Virgin.
If you're getting annoyed by bugs, have you given stock, rooted deodexed GB28 a try? When i get the TouchWiz itch, I run deodexed GB28, along with Agat's 1.3 kernel, TD's AIO mod, and Missing Link mod (both found in Themes and Apps of this forum).
I'm currently running Slimbean build 7 (4.2.2) as it's super lightweight, stable, and has good battery-life.
Sent from my SPH-D710 using Tapatalk
Do you know where I could find the voicemail apk?
Also, where can I mess with the APNs/what would work there?
The only reason I want a custom ROM at all is to be on KitKat. It honestly disgusts me a bit that google hasn't standardized versions....I don't get why every phone needs it's own ROM and never gets updated....
Thanks man.
Edit: I did find a MMS fix and visual voicemail all in one zip, but flashing it screwed the phone and I had to restore in recovery.
As far as editing APN's, I use Nova Prime launcher to create a shortcut on my homescreen to access them. Create shortcut to Activities/Settings/APNs and make your edits there.
Have you tried extracting the contents of the zip and manually applying those changes? Sorry but I wouldn't know anything else about configuring for Virgin. Maybe you could ask in that respective ROM thread, as I'm sure there are Virgin Mobile users there that have everything working.
Sent from my SPH-D710 using Tapatalk
Thanks for the ideas, I'm a bit slow sometimes when it comes to android/linux. I pulled the apk out of the zip, installed it, that's working fine. I just need to find a fix for my MMS. I can send but not receive.
Edit: I found a way to open the APN settings using voice dialer, but it's blank and choosing to add one, it does not save.
InfamousMyzt said:
Thanks for the ideas, I'm a bit slow sometimes when it comes to android/linux. I pulled the apk out of the zip, installed it, that's working fine. I just need to find a fix for my MMS. I can send but not receive.
Edit: I found a way to open the APN settings using voice dialer, but it's blank and choosing to add one, it does not save.
Click to expand...
Click to collapse
I had that issue too on cm11. They appear just fine on Liquidsmooth 4.4.4
Sent from my SPH-D710 using Tapatalk
Just for clarification, if I want to flash a new ROM when I'm already on a custom, do I need to use odin mobile to flash back to that GB rom with CWM before I flash the recovery and new ROM? Or can I just wipe and flash new recovery from the one I have now?
InfamousMyzt said:
Just for clarification, if I want to flash a new ROM when I'm already on a custom, do I need to use odin mobile to flash back to that GB rom with CWM before I flash the recovery and new ROM? Or can I just wipe and flash new recovery from the one I have now?
Click to expand...
Click to collapse
If the new recovery you are talking about is safe to flash from...and the one you are currently using is safe to flash from...then you can just reboot recovery and wipe cache and dalvik, then flash new recovery and then reboot recovery. Now you will be on the new, safe, recovery. So do your wipes ( data, cache, dalvik cache and format system ) and flash the rom.
If you want to go the mobile odin way..in case the recovery you currently have cant flash the new recovery you need, in order to flash the rom of choice..which im assuming is kitkat. As it needs the most up to date recovery to flash properly.
Then i have a simple guide you can follow to flash a safe kernel/recovery, in which you can then flash the newer recovery for flashing the rom you have choosen.
Link to guide. Post 5 is what you need to read.
If this sounds complicated or confusing..please post a link to current rom you wish to install and i will read the op and point you down the correct path.
Thanks, I was looking to use either of these. I've had issues with ROMs so far because I'm on Virgin Mobile and lots of stuff is buggy. Not sure which of these will work best:
http://forum.xda-developers.com/showthread.php?t=2298221
http://forum.xda-developers.com/epic-4g-touch/orig-development/rom-liquidsmooth-v3-1-t2803683
I'm not normally confused by rooting/flashing, but I don't understand the whole "safe recovery" thing.
I'm currently on this ROM: http://forum.xda-developers.com/showthread.php?t=2540250
InfamousMyzt said:
Thanks, I was looking to use either of these. I've had issues with ROMs so far because I'm on Virgin Mobile and lots of stuff is buggy. Not sure which of these will work best:
http://forum.xda-developers.com/showthread.php?t=2298221
http://forum.xda-developers.com/epic-4g-touch/orig-development/rom-liquidsmooth-v3-1-t2803683
I'm not normally confused by rooting/flashing, but I don't understand the whole "safe recovery" thing.
I'm currently on this ROM: http://forum.xda-developers.com/showthread.php?t=2540250
Click to expand...
Click to collapse
I see. Im not too familiar with what works with virgin mobile.
But if you can flash a virgin modem and set your apns after a flash.. That will get your data working. I'm at work.. But let me refewsh my memory later about virgin mobile on this device and I'll hit ya back.
Fyi.. I think jdsingle made a virgin mobile rom a while back.
Gil81 said:
I see. Im not too familiar with what works with virgin mobile.
But if you can flash a virgin modem and set your apns after a flash.. That will get your data working. I'm at work.. But let me refewsh my memory later about virgin mobile on this device and I'll hit ya back.
Fyi.. I think jdsingle made a virgin mobile rom a while back.
Click to expand...
Click to collapse
Thanks, I looked for jdsingle and only found posts for 3D Evo I believe; no activity since 2011?
InfamousMyzt said:
Thanks, I looked for jdsingle and only found posts for 3D Evo I believe; no activity since 2011?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=39371960
It was made for JB but it's a start
Sent from my SPH-D710 using Tapatalk
Yeah, I tried that one, it continually crashed my launcher every 3 seconds, had to reflash the ROM. It did give me the voicemail apk I needed though! Really if I could just get flash instructions for going from one rom to another, I'd be set probably.
Have you tried applying the changes and setting permissions in the zip manually, like with Root Explorer?
Sent from my SPH-D710 using Tapatalk
Surj138 said:
Have you tried applying the changes and setting permissions in the zip manually, like with Root Explorer?
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
No, I'm honestly not sure how to do that. Linux's file structure is confusing to me. Granted I'm also having wifi problems on this rom too, it disconnects all the time.
InfamousMyzt said:
No, I'm honestly not sure how to do that. Linux's file structure is confusing to me. Granted I'm also having wifi problems on this rom too, it disconnects all the time.
Click to expand...
Click to collapse
It honestly isn't too difficult at all. All I see in the zip is a new apns-conf.xml (permissions are rw-r-r), 2 build.prop edits, and the deleting of telephony.db located in /data/data/com.android.providers.telephony/databases
Sent from my SPH-D710 using Tapatalk