(ATT S3) I was running 4.1.2 then rooted and installed custom rom.. notice phone having few issues so i decided to revert back to the stock firmware but flashed the 4.1.1 firmware. so my baseband shows the new update but shows 4.1.1 version. The phone runs fine but have any of the new features so how can i fix this.
If your phone is stock firmware for your carrier have you tried updating ota or through kies?
khoury1 said:
(ATT S3) I was running 4.1.2 then rooted and installed custom rom.. notice phone having few issues so i decided to revert back to the stock firmware but flashed the 4.1.1 firmware. so my baseband shows the new update but shows 4.1.1 version. The phone runs fine but have any of the new features so how can i fix this.
Click to expand...
Click to collapse
If you reverted back to a truly stock ROM, then you can update it using Kies.
Related
Hi first of all I want to ask that I had stock 4.1.2 when I bought the phone, rooted it, flashed mj5 bootloader and successfully flashed the xperia z-ized rom based on 4.3 on my N7100. Then I wished to switch to dn3 rom but I still did not like it so I reverted back to stock 4.1.2 and updated to stock 4.4.2 via OTA updates. My question is, while updating via OTA to stock 4.4.2, can it be possible that I lost my mj5 bootloader and it was replaced by samsung's proprietary bootloader?
After using stock 4.4.2 I thought to check out the LS rom so I rooted, flashed philz recovery but the ROM does not boot at all and while trying to revert back to stock 4.1.2, ODIN displays the fail message. What did I do wrong and what should I do to overcome this? Thanks.
You've locked your bootloader because you upgraded to latest official which also comes with Knoxx.
Hey guys I am trying to update my galaxy s3 to kitkat. I am running galaxy s3 at&t variant 747 rooted 4.1.1. I747UCDLK3 update to kitkat. I realized I need to update to 4.1.2 first before doing the 4.3 update. I can't seems to find files I need for 4.1.2. Can someone point me in the right direction. Thank you for your help.
Are your running stock 4.1.1? If you are and your phone is not sim unlocked, unlock it using the free method. Once unlocked, use Odin to flash back to stock unrooted 4.1.1 and then run OTA until you get to KK. It's a longer process than trying to flash straight to 4.4 but is a safer method for people that are new to flashing ROMs.
I am on the stock rom 4.1.1. Does CWM recovery need to go back to stock as well? That is a good idea to unlock before I update.
If you flash back to stock 4.1.1 with Odin, it will wipe everything and put the phone back to completely unroot stock and stock recovery. Stock recovery and being unrooted is required for OTA updates.
Ok is this the link to unlock phone?
http://forum.xda-developers.com/showthread.php?t=2529200
Yes, that's it.
I can't seem to find 4.1.1 rom file links seem to be bad on unlock page.
There are stock rooted 4.1.1 images here: http://forum.xda-developers.com/showthread.php?t=1739426
You can use the free unlock method even if the ROM is rooted.
For some reason the at&t mirrors don't seem to be working either.
Mirror2 for the stock rooted 4.1.1 works for me.
I would like to root again after kit kat Is it easy to root with knox? Does unlock stick through kit kat? I really appreciate all of the help. Great website. Great people.
Many people have had success with rooting by using Towelroot.
The sim unlock is permanent.
Let me know how it goes for you @thepar. I expect to be updating to kitkat in the coming week.
For the benefit of those searching the forums to unlock their phones my experience may be of help to those on 4.1.2 or possibly even MJ2. I have had my SGS3 since June 2013 and only allowed one update, that was to 4.1.2. My phone was rooted long ago, but I just unlocked it earlier today and that was with a custom recovery in place and without unrooting. In my case I did not revert to the 4.1.1 rom. I did downgrade the modem to dlk3, that of 4.1.1 while leaving the rom and bootloader at MG2. After completing the unlock I upgraded the modem back to MG2. I have confirmed that SMS, MMS, phone, and wifi functionality is intact.
In truth, I will probably not go back to stock to get to kitkat. I am considering upgrading to the leaked MJ2/4.3 bootloader and MJB modem and then flash a kitkat rom which will work on them, there are several.
I just did the unlock yesterday. I need to find someone with a t-mobile sim to test if the unlock worked. Will I still be able to update the OS even though it is on rooted stock? What will it update me too?
I am kind of debating if I should install a custom rom minus KNOX.
thepar said:
I just did the unlock yesterday. I need to find someone with a t-mobile sim to test if the unlock worked. Will I still be able to update the OS even though it is on rooted stock? What will it update me too?
I am kind of debating if I should install a custom rom minus KNOX.
Click to expand...
Click to collapse
If you want to run an OTA update, you need stock recovery and an unrooted system.
I have a stock recovery but the os is rooted. I don't mind using oden to update the os. I might be better to install a rom with knox removed. I can't seem to find 4.1.1 stock unrooted. I did find 4.0.1 ICS.
You can find a stock ATT 4.1.1 ROM on sammobile.com.
You cannot use Odin to flash a stock KK ROM because it was never released in an Odin format by ATT. ATT provided the KK update via OTA updates. Complete KK updates were provided for i747m only.
Thanks so much!! downloading now.
Let us know what happens. Cheers
I have decided to go custom rom route. It is better to update stock ota first then install custom rom or custom rom straight from 4.1.1?
My SGH-T999 currently has slimkat 4.4.4 I have searched through this thread to see if it possible to go back down to back down to 4.3, however it appears that the because 4.4.4 has new bootloader this cannot be done and could brick the phone due to knox? Can anyone confirm this for me?
Are you looking to flashing the stock full firmware or a custom rom? You only flashed a 4.4.4 ROM not firmware, and there is no official 4.4.4 for any of our S3 variants, only 4.4.2. T999 doesn't even have a 4.4.2 update as of now, so you can go back to 4.3 firmware if you would like
serio22 said:
Are you looking to flashing the stock full firmware or a custom rom? You only flashed a 4.4.4 ROM not firmware, and there is no official 4.4.4 for any of our S3 variants, only 4.4.2. T999 doesn't even have a 4.4.2 update as of now, so you can go back to 4.3 firmware if you would like
Click to expand...
Click to collapse
Yes, I'm trying to flash back to the 4.3 stock image. Basically I have rooted, and flashed a custom Rom (slimkat) and I would like to back to the stock experience.
badapple3 said:
Yes, I'm trying to flash back to the 4.3 stock image. Basically I have rooted, and flashed a custom Rom (slimkat) and I would like to back to the stock experience.
Click to expand...
Click to collapse
Then yes, you can flash the stock firmware
I'm currently running CM12.1 on my phone. I love it, but I want to return to stock and give my phone an "out of the box" feel, and return it to the way Samsung made it to be.
I follow the typical instructions found here, but I always get an error (no screenshot available. Sorry!). I'm running Windows 10 and I have the proper drivers installed. Is there something I'm missing?
If the phone is running a 4.3 or newer bootloader, you cannot flash back to stock using a stock rom from sammobile.
Before flashing anything, I recommend verifying the bootloader and modem before flashing anything else. An improper bootloader and modem combination could brick the phone.
audit13 said:
If the phone is running a 4.3 or newer bootloader, you cannot flash back to stock using a stock rom from sammobile.
Before flashing anything, I recommend verifying the bootloader and modem before flashing anything else. An improper bootloader and modem combination could brick the phone.
Click to expand...
Click to collapse
Alright. Thanks. A bit disappointed, but thanks anyway. Besides, CyanogenMod isn't bad.
I was just running CM 12.1 / 13 and I was able to revert back to Roger's Stock ROM Android 4.4.2
Try Odin3 and installing the stock rom. But you should always verify the bootloader.
http://forum.xda-developers.com/gal...13-nightly-t3356062/post66306367#post66306367
If the OP is running the i747, it is the the AT&T version of the s3. AT&T never released a full firmware release for use in Odin after 4.1.1. AT&T only released OTA updates that upgraded the phones from 4.1.1 to 4.4.2. In order to flash a stock AT&T 4.4.2 ROM, it needs to be done from TWRP.
This may help: http://forum.xda-developers.com/galaxy-s3-att/general/ucufne4-to-ucufnj1-update-t2941792
hey can anyone help me? i've recently reverted my note 2 back to stock via odin and everything seemed fine. When the phone booted and i went through the setup process it always hangs. No matter what i do it always hangs. I've tried reflashing it and rebooting it over and over again but it always hangs. anyone know why this keeps happening?
Are you flashing the latest stock ROM? You're performing a factory reset before booting the ROM for the first time?
audit13 said:
Are you flashing the latest stock ROM? You're performing a factory reset before booting the ROM for the first time?
Click to expand...
Click to collapse
Yup latest stock rom, and before i flashed via odin i deleted my previous rom via twrp and formatted internal storage so its 100% clean
I've downgraded a Note 2 sgh-i317m to 4.1.1 from 4.4.2 by flashing a stock 4.1.1 ROM from sammobile.com in order to network unlock the phone. Flashing the stock 4.1.1 ROM tripped knox and could be installed via Odin because the 4.1.1 ROM from sammobile.com did not contain a 4.1.1 bootloader so I wound up with a stock 4.1.1 ROM on a 4.4.2 bootloader. After unlocking, I flashed the stock 4.4.2 ROM again and the the phone worked as it should.
I'm not sure which phone you have and I'm not sure downgrading and upgrading will work in your case but it's something you may want to look into.
audit13 said:
I've downgraded a Note 2 sgh-i317m to 4.1.1 from 4.4.2 by flashing a stock 4.1.1 ROM from sammobile.com in order to network unlock the phone. Flashing the stock 4.1.1 ROM tripped knox and could be installed via Odin because the 4.1.1 ROM from sammobile.com did not contain a 4.1.1 bootloader so I wound up with a stock 4.1.1 ROM on a 4.4.2 bootloader. After unlocking, I flashed the stock 4.4.2 ROM again and the the phone worked as it should.
I'm not sure which phone you have and I'm not sure downgrading and upgrading will work in your case but it's something you may want to look into.
Click to expand...
Click to collapse
I've managed to get the phone working (N7100) and it seems to run fine on Nougat. I did some testing and indeed it would always crash on setup with kitkat roms. I wonder why this is the case....
It is strange that kit kat causes a problem.
Have you tried using a different version of twrp to wipe the system before flashing with Odin? Can't think of anything else that may solve the problem.