the display ONLY works when i press power on vol up & down. when im in the setup the phone or screen is getting freezed.. is it a software problem? how can i flash a new rom or something when i cant see anything when pressing power on vol down (boot menu?) i read i have to navigate to "fastboot" and then flash with usb.. but i have a black screen of sh*t
are there screenshots about the menus where i could count the clicks to hit the points? or do you know the problem i got? - the display seems to work correct. allways i press the vol up down with power on the screen gets on
Related
I don't know what's wrong with my phone, but the screen display is messed up. Sometimes, the screen will display if I keep clicking the power button one-hundred times, but other than that it won't budge. Everything thing else works when I press the power button, the keyboard lights up, the home button and other buttons light, just not the screen. Like I said, I have to repeatedly press the power button so that in a slight chance, the screen might display.
I HATE THIS PHONE! What, do I do?
GALAXYEPICGUY said:
I don't know what's wrong with my phone, but the screen display is messed up. Sometimes, the screen will display if I keep clicking the power button one-hundred times, but other than that it won't budge. Everything thing else works when I press the power button, the keyboard lights up, the home button and other buttons light, just not the screen. Like I said, I have to repeatedly press the power button so that in a slight chance, the screen might display.
I HATE THIS PHONE! What, do I do?
Click to expand...
Click to collapse
Need more info.
Can you access the recovery partition and it works fine? Access the recovery partition by powering on the device by holding down: Volume Down, Camera, and Power. Release when the hardware icons light up (down on the bottom: settings, home, back, search). You should see a menu appear after several seconds.
If the recovery partition does work fine have you tried a factory reset?
If it is still problematic within the recovery partition then it is more than likely a hardware issue. Possibly a problem with the power button?
hi
i recently updated the firmware on my device and when i rebooted it, it didn't go into fast boot. I have tried holding the power button for 30 secs to 1 min but the strange thing is, i am able to change the volume and at one point I could tap the screen and hear keypad noises. i can also access the storage on my computer.
any ideas to exit this?
thanks
Try holding power button and volume up for about 30 seconds or so. When the screen goes dark to reboot, let go of those buttons and just hold volume down. Don't let go until the bootloader screen appears.
If it didn't work, it means you either pressed vol down too late, or let go of it too early. Just try again.
This usually works when folks have issues getting into bootloader.
I fixed it by holding the power button in then pressing the screen. I guess I hit shutdown
Hey, so I was messing around with my phone and using TWRP, I deleted the original ROM and then, having forgotten that I'd deleted the ROM, tried to reboot the phone. My phone is now stuck on the HTC splash screen (which at the bottom has the text "This build is for development purposes only...") and won't turn off, despite me holding the power button for probably 1+ minutes. I'm planning to wait until the battery dies, then once I can boot again try to get into TWRP by holding the power button and volume down. Does anyone know if there's a way I can get to TWRP without having to wait until the battery dies (my phone is at full charge), or whether this will not work and I should try something else?
Thanks in advance!
Press and hold power & volume up buttons until the screen turn black then release both buttons and quickly press & hold volume down button only. This will get you to hboot
ckpv5 said:
Press and hold power & volume up buttons until the screen turn black then release both buttons and quickly press & hold volume down button only. This will get you to hboot
Click to expand...
Click to collapse
Thanks this worked!
Hello everyone,
I'm trying to rescue the contacts of a S4 mini with a completely broken screen (just black). I found some post stating:
First remove battery and reinsert, then press volume down, home and power button at once until the device vibrates, release and push volume up. Connect USB and flash the TWRP recovery with Odin. After removing/reinserting battery press volume up home and power. It should be in MTP mode.
Click to expand...
Click to collapse
As I can't see what happens on the phone I tried it several times but no luck. What happens is:
I press all the mentioned keys until it vibrates and when I release the buttons to press volume up, it vibrates again and a few seconds later the Samsung jingle is playing (I guess this is normal booting). Any idea, what I'm doing wrong?
Blackswan
blackswan99 said:
Hello everyone,
I'm trying to rescue the contacts of a S4 mini with a completely broken screen (just black). I found some post stating:
As I can't see what happens on the phone I tried it several times but no luck. What happens is:
I press all the mentioned keys until it vibrates and when I release the buttons to press volume up, it vibrates again and a few seconds later the Samsung jingle is playing (I guess this is normal booting). Any idea, what I'm doing wrong?
Blackswan
Click to expand...
Click to collapse
depends what was causing your blank/black screen. If the cable has come loose then it will not work until it's reinserted.
What caused the black screen? Did you drop it?
Is there any sign of power in the screen? Is the black screen you mention caused by "no power" or "no image", do you think?
If no power seems to be getting to screen then you should take the back off and the inner cover and check the connectors, as first step. But could be other hardware failure (if not software).
Hi,
My Pixel 6 Pro screen went black, but I can still hear and feel that the phone is working. I used the volume up + power button to reboot it and now I touch the phone and I feel it vibrate as it's registering the touches. I also see at the bottom of the screen some white stripes flashing. It seems that the screen is damaged and I need a replacement screen.
Now my issue is that I can't seem to turn it off. As the screen is black, the only way to shut it down would be with hardware keys. But up until now, I haven't been able to figure out a way to turn the phone off.
Does anyone know how I can turn of the phone?
To replace the screen, obviously I need to turn it off first...
Usually long pressing the power button, but it may be different. As long as it gets fixed within a month or so it you can let it discharge until it auto shuts down. If more than a year old replacing the battery when repaired is a good idea anyway...
I tried long pressing the power button with no luck.
I tried volume down + power button for 20 seconds, didn't work either.
I tried volume up + power button for 20 seconds, this I think reboots the phone.
moleculezz said:
I tried long pressing the power button with no luck.
I tried volume down + power button for 20 seconds, didn't work either.
I tried volume up + power button for 20 seconds, this I think reboots the phone.
Click to expand...
Click to collapse
Power button only might take 20 or so seconds.
Otherwise just like it sit until repaired.
Power button + vol up + vol down. Keep holding down once you feel the phone vibrate. Takes you to the bootloader screen
The battery died.. so that's good!
Thanks anyways