Develop Bugs

Charger Concerns

I see that the wall charger for the Galaxy Nexus outputs 5V and 1A. Unfortunately, none of the extra chargers I'd like to use as additional chargers have this output. Some of them are 5.1V, and some of them all put out under 1A.
From what I understand, using a charger w/ a higher voltage could potentially damage the phone. I know that this unlikely considering it's only an extra .1V in my case, but I don't want to risk it.
As for the amps, I believe that using lower amps isn't dangerous, but may result in charging taking longer than normal.
Are these two assumptions correct? Also, does anyone know of any cheap chargers that put out 5V/1A? If you put in "phone charger" in Amazon, the second hit is a Samsung OEM charger that puts out 5V/0.7A, but I'd rather get one that is going to be an exact match.

700-800mah are fine and acceptable for charging. But if wanting to play games on a charger and still get some kind of charge, go with a 1000 mah charger. 1000 mah charger is also best to use while using mhl so you can hopefully not lose battery charge while streaming video over hdmi.
Sent from my samsung gt i9250 which is in the wrong country.

Speaking of the charger... anyone found a cheap charger adapter for the Nexus? I don't like the massive brick of a "international adapter" Handtec packaged with the phone >.>

Dmw017 said:
Speaking of the charger... anyone found a cheap charger adapter for the Nexus? I don't like the massive brick of a "international adapter" Handtec packaged with the phone >.>
Click to expand...
Click to collapse
http://www.amazon.com/Samsung-Micro-Travel-Charger-M540/dp/B002HJBM04
http://www.amazon.com/Samsung-Travel-Charger-Adapter-MicroUSB/dp/B0049IE70I

Dmw017 said:
Speaking of the charger... anyone found a cheap charger adapter for the Nexus? I don't like the massive brick of a "international adapter" Handtec packaged with the phone >.>
Click to expand...
Click to collapse
I'm using a Griffin charger for the iPhone (1 amp)... it's very small and the plug blades fold up, making it very pocketable. Give the included iPhone cable to a friend.
http://www.amazon.com/Griffin-NA231...?s=electronics&ie=UTF8&qid=1322795627&sr=1-33

alee said:
I'm using a Griffin charger for the iPhone (1 amp)... it's very small and the plug blades fold up, making it very pocketable. Give the included iPhone cable to a friend.
http://www.amazon.com/Griffin-NA231...?s=electronics&ie=UTF8&qid=1322795627&sr=1-33
Click to expand...
Click to collapse
it's.. 24 bucks ... for a charger..
lol fml

Dmw017 said:
it's.. 24 bucks ... for a charger..
lol fml
Click to expand...
Click to collapse
Haha, it's a nice charger.
If you don't get that one, do get a charger that does at least 700mA... or ideally 1A. Some of the cheaper chargers don't put out a lot of power and it will take a long time to charge your phone.

alee said:
Haha, it's a nice charger.
If you don't get that one, do get a charger that does at least 700mA... or ideally 1A. Some of the cheaper chargers don't put out a lot of power and it will take a long time to charge your phone.
Click to expand...
Click to collapse
...you say it folds too huh :/ ....
but for that price, i wonder if there are any samsung chargers that are just as good if not better..
that is Apple, after all
hey isnt http://www.amazon.com/Griffin-Techn...al-USB-Charging/dp/B004EYH5WY/ref=pd_sim_e_10 the same product , it says it does 5 volts at 5 watts ... thats the same right?
edit: some people are reporting that the charger only charges at 0.5A instead of the full 1A on [some] android devices. if you have the charger, can you confirm your nexus charges at the full 1A watts

I've been doing fine with just plugging it into my computer like I always do with every other phone.
Sent from my Galaxy Nexus using xda premium

Dmw017 said:
hey isnt http://www.amazon.com/Griffin-Techn...al-USB-Charging/dp/B004EYH5WY/ref=pd_sim_e_10 the same product , it says it does 5 volts at 5 watts ... thats the same right?
edit: some people are reporting that the charger only charges at 0.5A instead of the full 1A on [some] android devices. if you have the charger, can you confirm your nexus charges at the full 1A watts
Click to expand...
Click to collapse
Same one.
Good question on whether it's putting out a full 1A. I guess what I do is check the charge times tomorrow with a few different 1A chargers to see if it measures up.

I use this for home:
http://www.amazon.com/Cellet-Charger-Retractable-Cable-myTouch/dp/B004XVM1T0
And this for the car:
http://www.amazon.com/Griffin-Powerjolt-Dual-Universal-Micro/dp/B0042B9U8Q
Both are dual-USB and put out 1amp. Charges my GNEX and iPhone 4 (work) at the same time without issues.

Just feel like to chime in here for another question.
I know typical USB port from a PC outputs 0.5A while the wall charger outputs 1A, so besides charging time, is there any particular advantages to use wall charger over USB from PC?
I've read somewhere else states that despite the longer charging time using a USB port from a PC, it provides more thorough charges hence is better for the battery than using a wall charger, is this true?
Thanks!

assisterah said:
Just feel like to chime in here for another question.
I know typical USB port from a PC outputs 0.5A while the wall charger outputs 1A, so besides charging time, is there any particular advantages to use wall charger over USB from PC?
I've read somewhere else states that despite the longer charging time using a USB port from a PC, it provides more thorough charges hence is better for the battery than using a wall charger, is this true?
Thanks!
Click to expand...
Click to collapse
I've read that the wall charger drops the battery down to 90ish % after it hits 100% and just goes between the two levels until you unplug your charger
While a USB charge is slower and charges your device up to a "fuller" charge
...I may be unfathomably wrong though
---------- Post added at 10:57 PM ---------- Previous post was at 10:56 PM ----------
man that little Apple charger is so damn cute ... lol , ill probably end up buying it once the 1A volt charge is confirmed
edit: just bought it lol, oh well.. it will probably maybe more or less somewhat possibly work like it should at 1A :}

assisterah said:
Just feel like to chime in here for another question.
I know typical USB port from a PC outputs 0.5A while the wall charger outputs 1A, so besides charging time, is there any particular advantages to use wall charger over USB from PC?
I've read somewhere else states that despite the longer charging time using a USB port from a PC, it provides more thorough charges hence is better for the battery than using a wall charger, is this true?
Thanks!
Click to expand...
Click to collapse
I'm not an expert on the subject but I was under the impression that cycles (charge + discharge) were a bigger factor on battery life than something like this. The longer a current is running through the battery (charge or discharge) is detrimental to it's life span.
Leaving a laptop plugged in all the time ruins its battery is my source on this one. I would say it's because it has a constant charge running through the battery.

qreffie said:
I've been doing fine with just plugging it into my computer like I always do with every other phone.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
That takes a lot longer vs plugging it into the wall

rashad1 said:
That takes a lot longer vs plugging it into the wall
Click to expand...
Click to collapse
True dat. Unless it has changed , USB only outputs 500mA.
Sent from my Galaxy Nexus using Tapatalk

[hfm] said:
True dat. Unless it has changed , USB only outputs 500mA.
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
500mA is the max before the PC will disable the port. So your actually get less current.
There are some ports, depending on the motherboard that have a option of outputting more power for charging devices, and also have the port powered when the computer is off. But a normal usb 2.0 port is limited to 500mA max per spec... so a normal usb 2.0 port charging a phone is drawing less then 500mA, or it would get and over current condition and disable the port.

I design electronics and work with USB and batteries often, so let me clear some stuff up in no particular order:
- PC ports are limited to 500mA so will only ever output a max of 500mA
- You can use a wall charger that outputs 1000mA but on most devices the data pins on the micro USB need to be shorted to tell the phone it can try to draw more than 500mA. This is true for HTC devices for example. That means if you get a cheap charger that doesn't short the data pins, when you plug your standard micro-usb cable into it, it will still only charge your phone at 500mA.
- The charging controller is actually in the phone. It decides based on temperature (there's a sensor in the battery), current, voltage across the battery (current charge) and characteristics of the type of battery to figure out how much current to allow into the battery. Although its true that a 500mA charger may have different affects than 1000mA chargers, there usually is very little perceivable difference. Which is (slightly) better really depends on the charging controller and how it decides when to stop charging.
- When the battery is full, the phone continues to 'trickle charge' for a period of time. This isn't a bad thing. Overcharging a Lithium battery can be extremely dangerous, so normal charging occurs at a high speed and then slows down at a safe limit below the 'true' 100%. After that the phone continues to trickle charge to top up the battery. This is the reason you read in phone manuals you should charge the phone for 8 hours or overnight for its first charge.
- When charging at 500mA, the battery does not get as hot. This usually means you get closer to the true 100% before 'trickle charging' starts. With a 1000mA charge the battery heats up a lot more so charging may switch to trickle much sooner. Here's an example with made up figures.
Lets say you charge your battery with a 500mA charger, and it takes 2 hours. When the phone shows 100% it may actually be at 99%, and trickle charging. Leaving it for another 30 mins may take it to its full capacity.
Now, lets say you charge your battery with a 1000mA charger, and it takes 1 hour. When the phone shows 100% it may actually be at 98%, and trickle charging - It stopped sooner because the battery was hotter. Leaving it for another 30 mins may take it to full capacity.
Conclusion.. the 500mA charger took 2.5 hours, while the 1000mA charger took 1.5 hours. However if you unplugged both when the phone showed 100%, the 500mA charged battery may last longer, and so you think the 500mA somehow resulted in a more thorough charge!
At the end of the day, it doesn't matter which you use. the absolute charge cycles is what counts. Charge to 100%, then dont charge till its 0 for best battery care. Constantly plugging into a charger or dock all day on and off is bad. But having said that, your phone is there to be used, so a sensible balance of the two is the best bet.

Thank you so much for the detailed response, kam187. Would you recommend avoiding using a 5.1V charger, considering the phone came with a 5V charger?
Sent from my Galaxy Nexus using Tapatalk

I wouldn't use it. The 0.1v probably won't make any difference, but it may not be regulated. Chargers with these odd values sometimes don't have any regulator inside them. That could damage your phone as the voltage could shoot up and down as the current draw changes.
Just search amazon/ebay for any MicroUSB charger, and pick one from a reputable manufacturer like Motorola, HTC, Samsung etc. Since all phones now use MicroUSB, there's loads of these chargers around from previous phone models etc.
Here's just one I saw on amazon.com:
http://www.amazon.com/Samsung-Trave...E70I/ref=sr_1_3?ie=UTF8&qid=1322808220&sr=8-3

Charge with USB or the wall charger?

I know that this is a really lame question but I was wondering if one offers a "better" charge? USB charges very slowly compared to the wall charger so I dont want to use it unless I have to.
Also, why does the car charger have a USB hub for the charging cable that comes with the phone if it has a micro USB hub on the end of the cable that is connected to the charger anyways? That is just redundant, is it not?

The wall charger will charge faster... As for 'better'? A charged battery is a charged battery. If you charge it faster than the wall charger allows, there's a potential for overloading the battery (though there should be safeguards to prevent explosive results). But the wall charger is what I'd suggest.
As for the car charger, it's to allow multiple devices. Micro USB for your phone, and a USB port to plug in anything else that might need it (like an iPad or something). If you don't have 2 devices, ignore the USB port and just use the micro USB connection.

takaides said:
The wall charger will charge faster... As for 'better'? A charged battery is a charged battery. If you charge it faster than the wall charger allows, there's a potential for overloading the battery (though there should be safeguards to prevent explosive results). But the wall charger is what I'd suggest.
As for the car charger, it's to allow multiple devices. Micro USB for your phone, and a USB port to plug in anything else that might need it (like an iPad or something). If you don't have 2 devices, ignore the USB port and just use the micro USB connection.
Click to expand...
Click to collapse
Thank you.

Most USB-based charging only goes at 500mA, where as the OEM charger is about 1.5 amps (1500mA). You can find some 2.0A USB car chargers on eBay / Amazon for fairly cheap. They're worth it to get a full charge if you are in a hurry or have a short commute.
Here's one that's 2.1A for $9.99 on Amazon

Cheyse said:
Most USB-based charging only goes at 500mA, where as the OEM charger is about 1.5 amps (1500mA).
Click to expand...
Click to collapse
I've noticed that it chargers obscenely quickly with the little OEM charger. Any idea where to buy more of those (or more similarly powerful chargers?)

wanderfowl said:
I've noticed that it chargers obscenely quickly with the little OEM charger. Any idea where to buy more of those (or more similarly powerful chargers?)
Click to expand...
Click to collapse
Amazon/eBay is your friend. You can find plenty of 2amp USB chargers for like $9 with free shipping.

Cheyse said:
Amazon/eBay is your friend. You can find plenty of 2amp USB chargers for like $9 with free shipping.
Click to expand...
Click to collapse
Silly question, but as long as it's a 5 volt 2 amp MicroUSB charger, it'll work? I just don't want to fry my phone using some incompatible charger.

wanderfowl said:
Silly question, but as long as it's a 5 volt 2 amp MicroUSB charger, it'll work? I just don't want to fry my phone using some incompatible charger.
Click to expand...
Click to collapse
yeah that should work. All Modern day phones have a voltage regulator to stop overcharging.

Warning: iPad Charger
I tried using the iPad charger yesterday and that didn't work out very well. My phone turned off and didn't charge. I couldn't turn it back on, had to do a battery pull to get it going again.
Not sure if this is an isolated incident or not, but I'm going to stick with my Nexus and/or USB charger.

bigknowz said:
I tried using the iPad charger yesterday and that didn't work out very well. My phone turned off and didn't charge. I couldn't turn it back on, had to do a battery pull to get it going again.
Not sure if this is an isolated incident or not, but I'm going to stick with my Nexus and/or USB charger.
Click to expand...
Click to collapse
I used an iPad charger a month ago and the phone only charged 40% over seven hours and when I picked it up it was scorching hot.
Sent from my Galaxy Nexus using xda premium

joshnichols189 said:
I used an iPad charger a month ago and the phone only charged 40% over seven hours and when I picked it up it was scorching hot.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
It makes sense that your phone got hot. When using the stock charger (or any charger with a current rating of 1A or less), the charger is the one that is limiting the current to the battery, so the current-limiting circuit in the phone is not necessarily active and therefore not generating much heat. However, when using the iPad charger (which is rated around 2.5A, I think), the current-limiting circuit in the charger is not active because the 1A or so that the phone is drawing is well within the rating of the charger. Therefore in this case, the current-limiting circuit in the phone needs to actively limit the current and thereby generate a lot of heat.
I personally think that it's better to just use a charger that has a similar current rating to the stock charger. I higher-rated one might charge the battery just fine, but I'd rather keep all of that heat in the charger and away from the battery. Although, of course I could be mistaken -- feel free to correct me if I am wrong.

[Q] Using a 5v USB Wall Charger on a Zenfone 2 with +9v battery?

I ordered the 4gb ram version of Zenfone 2 and it only comes with the "Boostmaster" quick charger that outputs 9v and 2A.
Also, I saw pictures where the visible part of the battery in the phone says "+9v 2A" on it.
I want to know is it safe to use a regular 5v USB charger to charge this phone if I do not want to use the quick charger?
I am not sure since I read through some websites and I am concerned about these quotes:
Too low voltage may do damage. Slightly too low may work AOK or at
reduced current. Too low may damage equipment but not usually. Too low
may damage charger but not usually.
Click to expand...
Click to collapse
If the voltage is too low, you'll get either nothing, or odd / failure
behavior when the power draw on the system gets high.
Click to expand...
Click to collapse
I'd be more worried about the undervoltage. It may put a strain on the
voltage regulator in your laptop and may also put a strain on your
battery
Click to expand...
Click to collapse
So I want to know does the zenfone 2 has a special battery that allows lower voltage? Is its battery really a 9v battery?

I use a 5V charger, but the 2GB Zen has a 5.2V charger. There's nothing wrong with using weaker plugs, though the charge time is roughly 3-4hrs with the one I use.
"I'd Totally Hug You, If That Was Something I Did"

I took the back off and the battery the, it says 5.2 v and 9v on it for input so I guess you can use either one on it

oh, I didn't know it says that on battery, I didn't receive my phone yet, but all the pictures I 've seen on reviews and when I googled the image, all I see on the battery is "Input +9v 2A, 18W"
does the US version have the extra 5.2v printed on the battery?

VietnamTom said:
oh, I didn't know it says that on battery, I didn't receive my phone yet, but all the pictures I 've seen on reviews and when I googled the image, all I see on the battery is "Input +9v 2A, 18W"
does the US version have the extra 5.2v printed on the battery?
Click to expand...
Click to collapse
Yes. My 4GB model has both on it.

I've used a non QC charger on it and it worked fine. I mainly have QC's now so I use those when my phone doesn't have qi support. It chargers fine with the following Quick Charge 2.0 chargers: Aukey 10000mah battery pack, Asus boost master, Motorola Turbo, Incipio car charger, Power Partners 30w. I haven't had any issues charging it yet but it does get warm (battery hits 119 °F) using the Asus charger and cable.

Ive used multiple charging blocks that have 1 Amp and each time the charging stops at 77% and stays there overnight. This is kind of dumb I think. Anyone else having this issue when not using the stock charging block? Hmm it actually seems that this is happening on my cords that are 6 feet in length. The short cords are working fine

downshift00 said:
Ive used multiple charging blocks that have 1 Amp and each time the charging stops at 77% and stays there overnight. This is kind of dumb I think. Anyone else having this issue when not using the stock charging block? Hmm it actually seems that this is happening on my cords that are 6 feet in length. The short cords are working fine
Click to expand...
Click to collapse
Had issues with long cords before, mostly they would take ages to charge.
I'm using the stock Samsung Note 3/4 charger with no issue and the samsung cable.
It's easier to use than to unpack and find an Aussie adaptor for the ASUS charger....

Please see the following ASUS support page: "Introduction to quick charge"
http://www.asus.com/us/support/Sear...5-480F-AADA-FE49EDD81C01/?keyword=boostmaster
Sincerely,
ASUS_USA

VietnamTom said:
I ordered the 4gb ram version of Zenfone 2 and it only comes with the "Boostmaster" quick charger that outputs 9v and 2A.
Also, I saw pictures where the visible part of the battery in the phone says "+9v 2A" on it.
I want to know is it safe to use a regular 5v USB charger to charge this phone if I do not want to use the quick charger?
I am not sure since I read through some websites and I am concerned about these quotes:
So I want to know does the zenfone 2 has a special battery that allows lower voltage? Is its battery really a 9v battery?
Click to expand...
Click to collapse
I've charged on other charger when I grabbed the wrong one, but it won't do a full charge. I can only get about 75% on standard charger. Plug in the fast charger and it charges right up.

it should be fairly okay else it wouldn't be safe to plug this device into sa normal USB port (5v)

Charging Problem Solved "I Think"

I have been having problems charging my LG V20. When driving and streaming music with Waze I notice that I'm loosing charge capacity, so I have to only use Waze when absolutely necessary, during traffic jams or finding a restaurant or store etc. I keep getting intermittent "Slow Charging" or "Use OEM Charger & Cable" messages. I don't have the OEM charger or cable so I have been purchasing chargers & cables. I bought a 4 port 12V charger with QC 3.0 expecting that to solve my problem. The charger didn't change anything. So I bought a few USB 3.0 cables and just one time I got a "Fast Charging" session. I read a review about a charger like mine and the review rated the charger as poor. So I bought another QC 3.0 charger and went out to the car with the new charger and all my C type cables. Went through all 5 of my 3 ft cables and once again I keep getting intermittent "Slow Charging" or "Use OEM Charger & Cable" messages with the new charger. Bummer. I also have two short 25cm cables that I tried in desperation and Wow, both of these short cables produce consistent "Fast Charging" sessions. With both chargers! The 25cm cables are too short to reach where I mount my phone so I just ordered a 50cm Ugreen USB C Cable 5A Super Charge Cable. I'm hoping a short (less resistance) high quality cable will solve my problem. Any suggestions on another brand 50cm cable I should order as a backup?

rredmed said:
I have been having problems charging my LG V20. When driving and streaming music with Waze I notice that I'm loosing charge capacity, so I have to only use Waze when absolutely necessary, during traffic jams or finding a restaurant or store etc. I keep getting intermittent "Slow Charging" or "Use OEM Charger & Cable" messages. I don't have the OEM charger or cable so I have been purchasing chargers & cables. I bought a 4 port 12V charger with QC 3.0 expecting that to solve my problem. The charger didn't change anything. So I bought a few USB 3.0 cables and just one time I got a "Fast Charging" session. I read a review about a charger like mine and the review rated the charger as poor. So I bought another QC 3.0 charger and went out to the car with the new charger and all my C type cables. Went through all 5 of my 3 ft cables and once again I keep getting intermittent "Slow Charging" or "Use OEM Charger & Cable" messages with the new charger. Bummer. I also have two short 25cm cables that I tried in desperation and Wow, both of these short cables produce consistent "Fast Charging" sessions. With both chargers! The 25cm cables are too short to reach where I mount my phone so I just ordered a 50cm Ugreen USB C Cable 5A Super Charge Cable. I'm hoping a short (less resistance) high quality cable will solve my problem. Any suggestions on another brand 50cm cable I should order as a backup?
Click to expand...
Click to collapse
You need to check the voltage and amperage of your charger and then see if you can find some specs about your device and look for what voltage and amperage charger it is supposed to have. The power output of the charger is more relevant to charge capacity than the length of the cable being used.
Sent from my LGL84VL using Tapatalk

Droidriven said:
You need to check the voltage and amperage of your charger and then see if you can find some specs about your device and look for what voltage and amperage charger it is supposed to have. The power output of the charger is more relevant to charge capacity than the length of the cable being used.
Sent from my LGL84VL using Tapatalk
Click to expand...
Click to collapse
How do you explain multiple charges working in quick charge mode only with the short cables I have and not with any of the other cables, other than a problem with the cables?

rredmed said:
How do you explain multiple charges working in quick charge mode only with the short cables I have and not with any of the other cables, other than a problem with the cables?
Click to expand...
Click to collapse
Did you do any investigating to determine what voltage and amperage charger is required by your specific device? Did you compare that to the chargers that you have in order to verify whether the chargers you have are correctly rated for your device? That is a more important detail than you realize.
Yeah, I know what you're probably thinking, "I've never had a problem using a different charger to charge other devices that I have used/owned, how can it be an issue now?"
The answer to that is, not all devices are equal.
Maybe the charger is rated lower than is required by the device and when used with the longer, higher resistance cords, it can't provide enough power, but when using the short cord it's lower resistance might be enough to make up the difference. I've had this issue on a Kindle tablet, the charger for my phone would not charge the device quickly enough unless the device was turned off, it would even give the "may not charge" message when I would plug it in, but when I bought the proper charger for it, VIOLA!!, it charged correctly. Well what do you know, the correct charger and cord actually charges it correctly, imagine that, who would have ever thought that using the correct hardware would get the correct results. I'm being sarcastic, but you get my point.
It has more to do with how much the charger itself can provide than it does the length of the cord.
For example, if you had the original charger and the original cord, it would provide the correct amount of charge, but if you were to use a 10ft cord with the stock charger instead of the 3-6 foot that comes with the device, you would see a reduction in how much power it supplies, even more so if the charger is plugged into a drop cord/extension cord at the same time. I've had this exact issue on a couple of devices.
Another example is if you have a charger that is rated below what the device requires and you used the 3-6 ft stock cord, it could decrease the amount of power supplied by the charger block because the charger can't supply enough power to overcome the resistance of the stock cord, but when using the shorter, lower resistance cord with the lower rated charger, the cord's resistance could be low enough that it allows enough power to be supplied.
I'm not saying that it is 100% the issue that you are having, I'm saying that it is something to look into because it is more likely to be your issue because it is common for devices to charge faster, slower or not at all when using a charger that has a different rating than required by the device. Other possibilities are a damaged USB port on the device or the software has become corrupted, you would probably need to flash the stock firmware to fix the corrupted software.
Sent from my LGL84VL using Tapatalk

Car charging issues (standard S20 5g)

So i've had this phone for a few days and took a road trip and camped this weekend. To say the least, I had a good feel of battery usage of this phone for my typical tasks.
During my road trip, my phone started with about 92% when i threw it on the charger and started driving. I noticed it was charging up to 96% and it started to discharge slowly after about an 45 minutes of driving The phone indicated it was being charged. When I purchased this phone I also purchased a 6a car charger (dual port, 3a each), and also some USB-C to USB-A cables rated at 18w. If I disconnected the power for a little bit, and reconnected, it would charge maybe 3-8% before stopping again and I would repeat the cycle to ensure I had enough battery to allow navigation to take me to my destination. Luckily, I made it to my campsite with 82% battery to spare.
Now the strange thing- when I left this morning to come back home, I had 100% on my phone as I charged it with a battery bank fine. I left the phone plugged in to my car charger as I left, and it stayed at 100%. I even let the phone discharge to 94%, and plugged it in and it was able to charge to 100% with the navigation on as well as pandora.
Am I doing something wrong? Am I supposed to be using a USB-C type charger? Maybe I need a better rated cable?
Would love some help. I'm coming from an S7 edge so a lot has changed. thanks!

liberalswine said:
When I purchased this phone I also purchased a 6a car charger (dual port, 3a each),
Click to expand...
Click to collapse
I'm going to guess the charger just isn't that good, which one was it?

peachpuff said:
I'm going to guess the charger just isn't that good, which one was it?
Click to expand...
Click to collapse
It's a qualcomm based charger. https://www.amazon.com/AILUN-Charger-Qualcomm-Adapter-Compatible/dp/B01N8PPY1H

Sometimes while driving these things can work loose in the lighter socket, a slight touch fumbling around near it (my dash cam does this), or some bumps in the road.
I suspect on your outbound trip the charger might have been getting intermittent power from being not quite pushed "home", but on the return trip you could have pushed it in harder and it stayed put.

yrp888 said:
Sometimes while driving these things can work loose in the lighter socket, a slight touch fumbling around near it (my dash cam does this), or some bumps in the road.
I suspect on your outbound trip the charger might have been getting intermittent power from being not quite pushed "home", but on the return trip you could have pushed it in harder and it stayed put.
Click to expand...
Click to collapse
this wasn't the issue as I tried unplugging it and tried various 12v sockets in my car. However I think I did figure out my issue. The new charger i'm using does not use the "PD" protocol that the newest samsung phones use. Also, although the car charger i have is a qualcomm 3.0 protocol, and 36w- it's actually at 18w per usb A socket. The s20 wall charger is rated at 25w- so I'm now looking for a usb car charger that has a dedicated usb c socket with at least 25w of power and supports PD and pps

I'm using this one, no issues https://www.amazon.co.uk/gp/product/B07VP3HLGW/

jonboi said:
I'm using this one, no issues https://www.amazon.co.uk/gp/product/B07VP3HLGW/
Click to expand...
Click to collapse
is "super fast charging" enabled with that charger? I just ordered: https://www.amazon.com/gp/product/B077ZRBPNB/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
I read somewhere that the newer samsung devices require PPM protocol in order for super fast charging rates to be active (as well as PD)

liberalswine said:
this wasn't the issue as I tried unplugging it and tried various 12v sockets in my car. However I think I did figure out my issue. The new charger i'm using does not use the "PD" protocol that the newest samsung phones use. Also, although the car charger i have is a qualcomm 3.0 protocol, and 36w- it's actually at 18w per usb A socket. The s20 wall charger is rated at 25w- so I'm now looking for a usb car charger that has a dedicated usb c socket with at least 25w of power and supports PD and pps
Click to expand...
Click to collapse
I've reconsidered using fast chargers after the purchase of the S20, we've started using old 7.5W and 10W AC power adaptors. The 7.5W charger brings the phone up from about 30% to 80% in about 75min and I am fine with that. I have also used the 5W S3 charger but I think I'm happy with using the 7.5W charger.
If I need a fast boost I can always pull out the 25W charger.
I did buy a Belkin 18W PD car charger with the phone thinking "yeah, I need this" but now I will only use it for emergency charging. Tomorrow I'll pull out an old 10W car charger and plug the phone into the 10W socket while I drive around, see what happens.

Well I got into the car at 10:55 with the battery around 26%, plugged it into an old car charger I bought for our S4s (Pleomax, apparently OEM for Samsung) which has 2A & 1A outlets. It's not obvious on the charger which outlet is which but turns out I used the 1A outlet (AccuBattery showed the charging current hovering around 1000 mA).
Anyway, after 1hr of driving to my destination with a 5min break to fill up, the battery reached 66% so the 1A car charger raised the battery by 40% in about 60min, which I think is quite acceptable.
Car connected by BT for phone/SMS, received 1 call only. GPS/NFC etc are usually kept off.