Related
All I want..... Is an S3 with AICP on Sprint's network.
Two weeks ago I bought an S3 for $50, started playing with it, easily flashed AICP and TWRP 2.8.7.0 Recovery. Everything was awesome, until Sprint couldn't activate it. I flashed back to stock through Odin, Sprint still couldn't activate it (problems with programming). There was no Sprint boot screen, so assuming that was the main problem I found "SPH-L710_ND8_Full Restore_UNROOTED.exe" that restored the Sprint boot logo and viola! I had Sprint 4GLTE and talk and text.......... But now, this little devil S3 won't flash Roms that are 5.0 or newer. I have tried AICP, PAC-ROM, Vanir, Exodus.... all just boot to the boot logo and stay there, but when i try Gummy 4.4.4 it boots and works fine.
I always wipe cache, dalvik, & use correct gapps. Using TWRP 2.8.7.0 and have tried two other recoveries with same result. Tried flashing L710VPUDNJ2_L710SPRDNJ2_L710VPUDNJ2_HOME.tar.md5 through Odin and then reflashing recovery and retrying ROM, same result.
Right now its working fine with gummy 4.4.4 but I want 5.1-6.0 because that's the only way I will feel ok about having an S3 I'm sure I'm forgetting some details as this has been a two week off and on thing trying to get this phone to work, so if I am please forgive me and have pity (I'm using a blackberry Q10)
Why will lollipop roms not boot?!?!?!
Please..... help me obi wan kenobi...... you're my only hope
Papa Z said:
All I want..... Is an S3 with AICP on Sprint's network.
Two weeks ago I bought an S3 for $50, started playing with it, easily flashed AICP and TWRP 2.8.7.0 Recovery. Everything was awesome, until Sprint couldn't activate it. I flashed back to stock through Odin, Sprint still couldn't activate it (problems with programming). There was no Sprint boot screen, so assuming that was the main problem I found "SPH-L710_ND8_Full Restore_UNROOTED.exe" that restored the Sprint boot logo and viola! I had Sprint 4GLTE and talk and text.......... But now, this little devil S3 won't flash Roms that are 5.0 or newer. I have tried AICP, PAC-ROM, Vanir, Exodus.... all just boot to the boot logo and stay there, but when i try Gummy 4.4.4 it boots and works fine.
I always wipe cache, dalvik, & use correct gapps. Using TWRP 2.8.7.0 and have tried two other recoveries with same result. Tried flashing L710VPUDNJ2_L710SPRDNJ2_L710VPUDNJ2_HOME.tar.md5 through Odin and then reflashing recovery and retrying ROM, same result.
Right now its working fine with gummy 4.4.4 but I want 5.1-6.0 because that's the only way I will feel ok about having an S3 I'm sure I'm forgetting some details as this has been a two week off and on thing trying to get this phone to work, so if I am please forgive me and have pity (I'm using a blackberry Q10)
Why will lollipop roms not boot?!?!?!
Please..... help me obi wan kenobi...... you're my only hope
Click to expand...
Click to collapse
If you the original Sprint S3 and not the new Sprint Triband S3 then you should not have any problem at all! How long are you waiting on it to boot? I had the new Triband model and I had and I thought the lollipop roms wouldn't boot either but I had to give it 5-10mins sometimes on the 1st boot!
RootSuperSU said:
If you the original Sprint S3 and not the new Sprint Triband S3 then you should not have any problem at all! How long are you waiting on it to boot? I had the new Triband model and I had and I thought the lollipop roms wouldn't boot either but I had to give it 5-10mins sometimes on the 1st boot!
Click to expand...
Click to collapse
I have let it sit overnight a few times now.... just to make sure. With the Gumy 4.4.4 Rom it only took about 2 minutes which I was shocked by.
I feel like I have literally tried everything.
Papa Z said:
I have let it sit overnight a few times now.... just to make sure. With the Gumy 4.4.4 Rom it only took about 2 minutes which I was shocked by.
I feel like I have literally tried everything.
Click to expand...
Click to collapse
Yea Kitkat roms don't take very long on 1st boot anymore. But as for lollipop what all roms have you tried flashing?
There's only 2 reasons I can think of that they might not be working. 1st is your model SPH-710T or SPH-710 and 2nd are trying to flash a custom kernel with it?
Another thing I feel like is worth mentioning.... When I first flashed the AICP Rom I played with it for a few days so i had all my stuff installed. Realized I had to flash to stock to activate on Sprint so i made a Nandroid backup of my AICP 5.1 setup. When i restore this backup it boot loops as well.
Tried restoring everything except data, wiped dalvik and cache, all using the same twrp recovery. So strange...
RootSuperSU said:
Yea Kitkat roms don't take very long on 1st boot anymore. But as for lollipop what all roms have you tried flashing?
There's only 2 reasons I can think of that they might not be working. 1st is your model SPH-710T or SPH-710 and 2nd are trying to flash a custom kernel with it?
Click to expand...
Click to collapse
I have tried AICP, PAC-ROM, Vanir, Exodus.... all just boot to the boot logo and stay there. Mine is the SPH-L710 not the triband 710T. The Roms I tried to install, as far as I know, come with the kernel in the ROM zip. I have tried AICP and the pac-rom with just the rom zip and gapps, as well as with a few custom kernels just to see if it would change anything.
Ah another thing, may be unrelated because I only get this when flashing AICP and Pac, it says "unmount of /system failed; no such volume" and then flashes boot img and seems to be successful.
When I flashed exodus and Vanir it does not say this, and all seems to go perfect..... buuuuuut still boot loops/gets stuck at boot animation
Even tried flashing rom and gapps via adb sideload
I have a bad esn l710 in really poor condition. Just flashed the same recovery, same AICP rom, same gapps, all from the same SD card, and this one is working fine. Boots up in just a few minutes.
So i have to be missing something or something is wrong with the one I can actually activate.
EDIT: So "unmount of /system failed; no such volume" error doesn't matter, same thing happened on the bad ESN device that booted up fine.
Update (if anyone cares lol): I flashed both devices completely to stock with the "SPH-L710_ND8_Full Restore_UNROOTED.exe" and then did the exact same thing to both devices, twrp>aicp rom>gapps>dalvik>boot, the bad ESN crap device boots AICP fine, the good condition good ESN one boot loops forever.
I am at a loss here, both devices are exactly the same SPH-L710, flashed to stock completely, but the one with a good ESN that would actually work will not boot lollipop roms. I disassembled both devices to look for hardware differences of any kind, they're identical (with no signs of damage). The only difference is the bad esn one is a slightly deeper shade of blue. I'm pulling my hair out.
I even tried using the force, but my midichlorian levels have never been that good.
Who knows man
I've seen this only a couple times. One guy had luck. When it was stuck, he just kept randomly hitting the power button and eventually long pressed until it was about to reboot (screen freezes for a second) and when it shut off, held home and volume up so it booted recovery when it came on. Then just rebooted system, and this time it booted. Also, sometimes when going back and forth between KitKat and lollipop, you need to wipe internal storage. Make sure you have the latest twrp too (2.8.7.0).
Just shots in the dark, but you never know.
I saw one member who was never able to boot lollipop roms, you would be the second. So its pretty rare.
Well you now know 3 people that cant flash lollipop roms on an l710 NON tri-band.... Ive tried all of them including a couple of Vanir 6.0 roms and the ONLY one i could get to take was a BeanStalk 5.01 rom and a Candykat only after flashing its KitKat predecessor... All KitKat roms work just fine.. Curious,, as I also used the same odin non- rooted rom to get back to stock and after that had trouble flashing lollipop roms period.. Maybe something with the symlinks in that un-rooted rom??? I'm at a loss myself...
madbat99 said:
I've seen this only a couple times. One guy had luck. When it was stuck, he just kept randomly hitting the power button and eventually long pressed until it was about to reboot (screen freezes for a second) and when it shut off, held home and volume up so it booted recovery when it came on. Then just rebooted system, and this time it booted. Also, sometimes when going back and forth between KitKat and lollipop, you need to wipe internal storage. Make sure you have the latest twrp too (2.8.7.0).
Just shots in the dark, but you never know.
I saw one member who was never able to boot lollipop roms, you would be the second. So its pretty rare.
Click to expand...
Click to collapse
As the only possible solution I have not tried, I will attempt to randomly press/long press the home button as it boots and then boot recovery..... lol
What's even weirder is it worked fine with AICP lollipop just about a month ago, before i had done anything to it. but I repeated all the things i did to it on another s3 and that one still worked fine with lollipop roms.
nexusdread13 said:
Well you now know 3 people that cant flash lollipop roms on an l710 NON tri-band.... Ive tried all of them including a couple of Vanir 6.0 roms and the ONLY one i could get to take was a BeanStalk 5.01 rom and a Candykat only after flashing its KitKat predecessor... All KitKat roms work just fine.. Curious,, as I also used the same odin non- rooted rom to get back to stock and after that had trouble flashing lollipop roms period.. Maybe something with the symlinks in that un-rooted rom??? I'm at a loss myself...
Click to expand...
Click to collapse
I used that same unroooted Odin rom on a bad esn s3 and it works fine with lollipop roms. So strange
Edit: no idea what symlinks are
I have similar probl.
After 4 months with CM12.1 I'm flashing NJ2 and upd. to OH1.
After THAT - I cant to flash anything ROM lollipop and higher.
I dont know, what is it.
I was waiting for 4 hours, 8 hours, 12 hours, a day!
I dont know, I dislike TW roms, help anyone!
CyanogenMod 13.0 D2SPR
...I dunno, wanna start from scratch?
http://forum.xda-developers.com/galaxy-s3-sprint/development/rom-d2spr-cyanogenmod-13-0-t3248561
- Use the Sprint-made TWRP .img in the OP with Flashify (from the Play Store)
- Flash a CM 13, add GApps (from OpenGApps), and a recent SuperSU.
I'm a bit of a half-no0b, so I may be talking out me pants.
Bonne chance!
DavidovDI said:
I have similar probl.
After 4 months with CM12.1 I'm flashing NJ2 and upd. to OH1.
After THAT - I cant to flash anything ROM lollipop and higher.
I dont know, what is it.
I was waiting for 4 hours, 8 hours, 12 hours, a day!
I dont know, I dislike TW roms, help anyone!
Click to expand...
Click to collapse
I'm glad I'm not the only one. Someone has to know how to fix this.... somewhere.
Papa Z said:
I'm glad I'm not the only one. Someone has to know how to fix this.... somewhere.
Click to expand...
Click to collapse
Yep!:crying::crying::crying:
I had the same problem. Try this. It worked for me today.
I have a d2spr (originally from sprint). It is now activated with boost. L710VPUDOH1 bootloader and baseband. CF-Auto-Root-d2spr-d2spr-sphl710.tar.md5 flashed with odin for root. twrp-2.8.7.0-d2spr.img.tar.md5 flashed with odin as recovery. I backed up Apn's with "APN Backup & Restore" app. I wiped system, cache, dalvik, data. Flashed cm-12.1-20151117-SNAPSHOT-YOG7DAO1K7-d2spr.zip... . Flashed pa_gapps-modular-full-5.1-20150315-signed.zip. I Wiped Dalvik. The device booted smoothly within approximately 7 minutes. I had full function as far as I could tell. Everything worked well. Ran this setup for about a month. I decided to restore a stock w/root backup made with twrp2870. Bootlooped until I learned to wipe internal sd when going back to 4.4.2. I wiped the internal sd and successfully booted stock w/root backup. When I tried to go back to cm 12.1 backup, I ran into the same problem... boot loop for hours. Multiple times. Backups and different nightly zips. I found and flashed every custom recovery I could find for this device to try to make it work. Eventually... while I had twrp-2.8.7.2-d2spr.img as my recovery (not sure if it makes a difference or not). I found this...
(apparently the link is not allowed due to my lack of posts with this forum)
im pasting from another page at this point...
Ha! Got it! Visited the #cyanogenmod channel on freenode irc and there were some VERY helpful people there. So I've got a few instructions.
Flash the latest TWRP recovery via ODIN. (2.8.7.0-d2spr at the time of writing).
Flash your CM 12 zip file
On your PC (with adb installed) run the command "adb shell dd if=/dev/block/platform/msm_sdcc.1/by-name/persist of=/sdcard/persist.img"
Then run "adb pull /sdcard/persist.img" (This will give you a backup of the persist partition in case anything goes wrong)
Run the command "mke2fs -t ext4 /dev/block/platform/msm_sdcc.1/by-name/persist"
Run the command "adb reboot"
If it boots into OS, great! Reboot into recovery and install the lastest gapps package.
I did it from adb in a Cygwin64 Terminal. The device booted my cm12.1 backup the first time I tried. I think it would work just as well with adb from a windows command prompt. I only found this on another page. Credit goes to someone from "#cyanogenmod channel on freenode irc". Hope it is as much help to all of you as it was to me.
HouseHG said:
I have a d2spr (originally from sprint). It is now activated with boost. L710VPUDOH1 bootloader and baseband. CF-Auto-Root-d2spr-d2spr-sphl710.tar.md5 flashed with odin for root. twrp-2.8.7.0-d2spr.img.tar.md5 flashed with odin as recovery. I backed up Apn's with "APN Backup & Restore" app. I wiped system, cache, dalvik, data. Flashed cm-12.1-20151117-SNAPSHOT-YOG7DAO1K7-d2spr.zip... . Flashed pa_gapps-modular-full-5.1-20150315-signed.zip. I Wiped Dalvik. The device booted smoothly within approximately 7 minutes. I had full function as far as I could tell. Everything worked well. Ran this setup for about a month. I decided to restore a stock w/root backup made with twrp2870. Bootlooped until I learned to wipe internal sd when going back to 4.4.2. I wiped the internal sd and successfully booted stock w/root backup. When I tried to go back to cm 12.1 backup, I ran into the same problem... boot loop for hours. Multiple times. Backups and different nightly zips. I found and flashed every custom recovery I could find for this device to try to make it work. Eventually... while I had twrp-2.8.7.2-d2spr.img as my recovery (not sure if it makes a difference or not). I found this...
(apparently the link is not allowed due to my lack of posts with this forum)
im pasting from another page at this point...
Ha! Got it! Visited the #cyanogenmod channel on freenode irc and there were some VERY helpful people there. So I've got a few instructions.
Flash the latest TWRP recovery via ODIN. (2.8.7.0-d2spr at the time of writing).
Flash your CM 12 zip file
On your PC (with adb installed) run the command "adb shell dd if=/dev/block/platform/msm_sdcc.1/by-name/persist of=/sdcard/persist.img"
Then run "adb pull /sdcard/persist.img" (This will give you a backup of the persist partition in case anything goes wrong)
Run the command "mke2fs -t ext4 /dev/block/platform/msm_sdcc.1/by-name/persist"
Run the command "adb reboot"
If it boots into OS, great! Reboot into recovery and install the lastest gapps package.
I did it from adb in a Cygwin64 Terminal. The device booted my cm12.1 backup the first time I tried. I think it would work just as well with adb from a windows command prompt. I only found this on another page. Credit goes to someone from "#cyanogenmod channel on freenode irc". Hope it is as much help to all of you as it was to me.
Click to expand...
Click to collapse
I flashed mine back to stock and sold it.... got a good deal on an S5 and flashed MOAR to it.
I found this thread a while back and attempted to do what it says to do, but I couldn't get it to work for me. What exactly does running those commands do that suddenly makes it work?
I think it either reformats or converts the persist partition to ext4. I'm not 100% sure yet bc I haven't had time to look into it.
Sent from my SPH-L710 using Tapatalk
Yesterday, my Samsung Grand Duo i9082 (GI9082, GT-i9082_CU) @ CM 10.1 decided to keep freezing on chinese logo screen. Booting into Odin still possible, but no matter what recoveries I tried to flash, nothing changes. For example, flashing philz_touch_5.15.0-i9082.tar.md5 via Odin software tells me it was a success, then reboots my device and I'm back at Odin mode - no clockworkmode in sight, nothing changed!
I used to install Odin and then CM 10.1, since those work with the chinese version of the Grand Duo which wasn't updated to 4.2.2. But sadly the download link (http://forum.xda-developers.com/showthread.php?t=2231953) expired, and while the source code is available on this link I have no clue on how to create a rom from it. Couldn't find any current ROMs that work with Odin and 4.1.2, hence I tried to install CMW and several others as recoveries instead.
Out of ideas and it's a shame because it seems to have a fine connection to the PC @ Odin recovery, but for some reason no recovery file I tried had any effect.
edit: That feeling, when after a whole day of trying and not having any success you finally got a step forward ........... damn. Found this thread: http://forum.xda-developers.com/showthread.php?t=2315529 and http://www.droidviews.com/best-custom-roms-for-samsung-galaxy-grand-duos-gt-i9082/, flashed CMW 6.3.0.2 with Odin and apparently you have to press volume up + home + power in order to enter CMW. God damn Let's see if this will lead to final success...
edit 2: All I need now is any ROM for 9082 v4.1.2. Hmm.
edit 3: Found the xperia mod whose older version works with 4.1.2: http://forum.xda-developers.com/showthread.php?t=2304492. Trying it tomorrow. This is intense.
All the best mate.
Looking at your situation, I would have suggsted you to upgrade to 4.2.2, but then it seems you have found a solution.
BTW, I love CM10.
vdbhb59 said:
All the best mate.
Looking at your situation, I would have suggsted you to upgrade to 4.2.2, but then it seems you have found a solution.
BTW, I love CM10.
Click to expand...
Click to collapse
Don't think I can upgrade to 4.1.2, wouldn't know how. But I don't care anymore because I got a working phone again )))))
I found out that the original installation files including the 10.1 rom were still on the sd card. Simply reinstalled it.
But really odd, for the phone suddenly freezing for no apparent reason ...
edit: I just looked at the settings, and it's version 4.2.2. That's interesting, I could have sworn I had trouble updating it back then and gave up at some point back then. Hmm. That means I could install the latest CM even, I guess .... but then again, never change a running system, ay?
Lastedit: Trying to update to CM 14 did not work, it ended in a simple boot-loop. I'm back on good ol' 10.1 now
Quick-howto for future me: 1)keep volume-up, home + power pressed to enter Clockworkmod 2) wipe cache/reset to factory 3) install cm 10.1 4) install gapps 5) done.
misterioes said:
Don't think I can upgrade to 4.1.2, wouldn't know how. But I don't care anymore because I got a working phone again )))))
I found out that the original installation files including the 10.1 rom were still on the sd card. Simply reinstalled it.
But really odd, for the phone suddenly freezing for no apparent reason ...
edit: I just looked at the settings, and it's version 4.2.2. That's interesting, I could have sworn I had trouble updating it back then and gave up at some point back then. Hmm. That means I could install the latest CM even, I guess .... but then again, never change a running system, ay?
Lastedit: Trying to update to CM 14 did not work, it ended in a simple boot-loop. I'm back on good ol' 10.1 now
Quick-howto for future me: 1)keep volume-up, home + power pressed to enter Clockworkmod 2) wipe cache/reset to factory 3) install cm 10.1 4) install gapps 5) done.
Click to expand...
Click to collapse
If you are on 4.2.2 then try CM11 and CM12.1 (Jan build).
Same pattern.
Edit: CM11: http://forum.xda-developers.com/showthread.php?t=2563557
CM12.1 (Only the ROM File link): http://forum.xda-developers.com/gal...cm-12-1-pawitp-jan-april-build-files-t3450122
I can flash back to stock via the SkipSoft Unified Android Toolkit, but not matter how far back I go, the only 3rd party ROM that will not get stuck on a never-ending bootscreen after install is CM 11-20150831-SNAPSHOT-XNG3CAO3FN-d2lte. Not even the CM nightlies that came immediately before or after would work once this was installed.
I would like to try something newer if there is a stable Lollipop, Marshmallow, or Nougat ROM you would recommend. I don't use as a phone anymore, so I don't even need cellular data to work.
Thank you very much to anyone that even takes a look at this.
More info...
Model Number
1HZGY
Android version
4.4.4
Baseband version
L710VPUDOH1
Kernel version
3.4.104-cyanogenmod-g3652409
[email protected] #1
Mon Aug 31 16:36:33 OCT 2015
Build number
cm_d2lte-userdebug 4.4.4 KTU84Q bdfbe2c9c2
test-keys
SELinux status
Enforcing
This forum is for the Sprint S3, but I don't recognize your model number. Sprint is SPH-L710
If you do In fact have the Sprint model, I have many ROM suggestions. Including nougat ROMs. Also make sure you have the most up to date TWRP. Don't search d2lte anymore, they are no longer unified LTE builds. Sprint is d2spr, att is d2att, etc.
madbat99 said:
This forum is for the Sprint S3, but I don't recognize your model number. Sprint is SPH-L710
If you do In fact have the Sprint model, I have many ROM suggestions. Including nougat ROMs. Also make sure you have the most up to date TWRP. Don't search d2lte anymore, they are no longer unified LTE builds. Sprint is d2spr, att is d2att, etc.
Click to expand...
Click to collapse
It is definitely the sprint model. And I don't search for d2lte - I know that was a very short term thing for CM. Nothing else will flash and then boot though. Even tried using d2spr nightlies that were released after the 8/31/2015 d2lte snapshot.
I was using TWRP v3+ already but I used their official app to flash latest version, as per your advice. Now device only boots to download mode.
No worries as this is not my daily driver. I do hope to get it fixed, though.
Am I going to have to use the toolkit to flash stock and try again or is there a way to progress from here?
pravus87 said:
It is definitely the sprint model. And I don't search for d2lte - I know that was a very short term thing for CM. Nothing else will flash and then boot though. Even tried using d2spr nightlies that were released after the 8/31/2015 d2lte snapshot.
I was using TWRP v3+ already but I used their official app to flash latest version, as per your advice. Now device only boots to download mode.
No worries as this is not my daily driver. I do hope to get it fixed, though.
Am I going to have to use the toolkit to flash stock and try again or is there a way to progress from here?
Click to expand...
Click to collapse
Wow never seen that from installing TWRP. Do you have the triband model by chance?
I would try Odin back to stock and flash TWRP again. I usually get TWRP right from their site.
Are you wiping data and factory resetting (including internal storage) before trying to boot these ROMs? It is required for the newer ROMs. Octos has a good nougat build. Commotio is pretty solid too. I'm running lineage right now and it's perfect.
https://forum.xda-developers.com/galaxy-s3-sprint/development/rom-octos-t3532535/post70408050
https://forum.xda-developers.com/ga...samsung-galaxy-s3-vanir-t3006645/post58268135
https://download.lineageos.org/d2spr
https://dl.twrp.me/d2spr/
madbat99 said:
Wow never seen that from installing TWRP. Do you have the triband model by chance?
I would try Odin back to stock and flash TWRP again. I usually get TWRP right from their site.
Are you wiping data and factory resetting (including internal storage) before trying to boot these ROMs? It is required for the newer ROMs. Octos has a good nougat build. Commotio is pretty solid too. I'm running lineage right now and it's perfect.
https://forum.xda-developers.com/galaxy-s3-sprint/development/rom-octos-t3532535/post70408050
https://forum.xda-developers.com/ga...samsung-galaxy-s3-vanir-t3006645/post58268135
https://download.lineageos.org/d2spr
https://dl.twrp.me/d2spr/
Click to expand...
Click to collapse
That was a first for me too. TWRP has always been fairly easy to install and update.
Not sure if this is the triband but I assume that is more expensive and that it is not the standard model Sprint was pushing, so I doubt it. Is there a way for me to check?
Yes I was wiping data, cache, system and internal storage wit each install. I had an AT&T Samsung Galaxy S3 and an AT&T LG G3 that I did a lot of flashing on, so I am familiar with the basics. I tried flashing lineage and commotio recently with no luck and had to install the final CM11 snapshot again.
Will flash back to stock and will try again. If I recall, the final update is only OTA. Do I need to take it before moving on?
Thanks for your help!
pravus87 said:
That was a first for me too. TWRP has always been fairly easy to install and update.
Not sure if this is the triband but I assume that is more expensive and that it is not the standard model Sprint was pushing, so I doubt it. Is there a way for me to check?
Yes I was wiping data, cache, system and internal storage wit each install. I had an AT&T Samsung Galaxy S3 and an AT&T LG G3 that I did a lot of flashing on, so I am familiar with the basics. I tried flashing lineage and commotio recently with no luck and had to install the final CM11 snapshot again.
Will flash back to stock and will try again. If I recall, the final update is only OTA. Do I need to take it before moving on?
Thanks for your help!
Click to expand...
Click to collapse
Shouldn't need all updates, but it's not a bad idea. If the model has a "t" on the end then it's a triband. That one can be troublesome.
madbat99 said:
Shouldn't need all updates, but it's not a bad idea. If the model has a "t" on the end then it's a triband. That one can be troublesome.
Click to expand...
Click to collapse
Sorry for the delay. I had some issues restoring stock with one PC and was too stubborn to try on a different PC until yesterday.
Was able to get stock working, rooted and I installed TWRP 2.7.x and then updated to the latest (3.1.x). I then wiped all partitions from TWRP and sideload installed latest Commotio and opengapps. Same issue - stuck on the boot screen (animated water).
Anything left to try? Confirmed it is not the triband. Thanks again.
UPDATE: just tested with latest CarbonROM. Issue persists
pravus87 said:
Sorry for the delay. I had some issues restoring stock with one PC and was too stubborn to try on a different PC until yesterday.
Was able to get stock working, rooted and I installed TWRP 2.7.x and then updated to the latest (3.1.x). I then wiped all partitions from TWRP and sideload installed latest Commotio and opengapps. Same issue - stuck on the boot screen (animated water).
Anything left to try? Confirmed it is not the triband. Thanks again.
UPDATE: just tested with latest CarbonROM. Issue persists
Click to expand...
Click to collapse
I've been stuck on boot animation on a few fresh installs of ROMs. If I let it sit there for 5 mins or so then hold power until it reboots, it usually boots up. Where KitKat ROMs used to say building dalvik cache, or whatever the particular ROM had, newer nougat ROMs do not. The boot animation plays while it establishes art caches. It can take awhile on a fresh install.
madbat99 said:
I've been stuck on boot animation on a few fresh installs of ROMs. If I let it sit there for 5 mins or so then hold power until it reboots, it usually boots up. Where KitKat ROMs used to say building dalvik cache, or whatever the particular ROM had, newer nougat ROMs do not. The boot animation plays while it establishes art caches. It can take awhile on a fresh install.
Click to expand...
Click to collapse
Tried flashing Commotio again and held down power to reboot after about 5min on boot screen. Waited over 10 mins the second time and still no luck. Just reboot again and will give it until the battery dies. Let me know if you have any other suggestions. Thanks again.
UPDATE: Tried with latest CarbonROM and latest LineageOS builds as well. None will boot. Old CM11 snapshot build still installs and boots without issue.
pravus87 said:
Tried flashing Commotio again and held down power to reboot after about 5min on boot screen. Waited over 10 mins the second time and still no luck. Just reboot again and will give it until the battery dies. Let me know if you have any other suggestions. Thanks again.
UPDATE: Tried with latest CarbonROM and latest LineageOS builds as well. None will boot. Old CM11 snapshot build still installs and boots without issue.
Click to expand...
Click to collapse
Have you formatted data? Switching between KitKat and nougat you have to wipe internal storage.
I would "format data" not just wipe (in case of any encryption) and also do a factory reset in recovery.
madbat99 said:
Have you formatted data? Switching between KitKat and nougat you have to wipe internal storage.
I would "format data" not just wipe (in case of any encryption) and also do a factory reset in recovery.
Click to expand...
Click to collapse
Yes - I have wiped everything, including internal storage and used the "format data" option. I have tried ADB sideloading each of the ROMs mentioned with everything wiped. I've also tried removing the external SD card, copying the ROMs to it from a PC, reinserting into the phone and attempting install that way. Still, no luck.
pravus87 said:
Yes - I have wiped everything, including internal storage and used the "format data" option. I have tried ADB sideloading each of the ROMs mentioned with everything wiped. I've also tried removing the external SD card, copying the ROMs to it from a PC, reinserting into the phone and attempting install that way. Still, no luck.
Click to expand...
Click to collapse
Wow, that is thorough. Maybe make sure non of your ROM or gapps packages are corrupt (check md5 or sha1, etc.)
What gapps are you using? I usually use open gapps for 7.1x arm, mini or micro. Beans gapps also work well. Just make sure they are for 7.1.
Maybe try to boot the ROM without gapps ( just a shot in the dark). Are you flashing any other mods with it? I think Commotio comes rooted with magisk.
madbat99 said:
Wow, that is thorough. Maybe make sure non of your ROM or gapps packages are corrupt (check md5 or sha1, etc.)
What gapps are you using? I usually use open gapps for 7.1x arm, mini or micro. Beans gapps also work well. Just make sure they are for 7.1.
Maybe try to boot the ROM without gapps ( just a shot in the dark). Are you flashing any other mods with it? I think Commotio comes rooted with magisk.
Click to expand...
Click to collapse
I have tried with 7.0 and 7.1 opengapps arm pico but I haven't been doing so during troubleshooting so as to isolate the issue. I tried once with Commotio and once with CarbonROM in case they needed it for some reason, but since no luck, I figure I'll wait to flash gapps once I get a successful boot.
I downloaded all ROMs with Free Download Manager, which does a pretty good job at maintaining file integrity and working through connection hangups, but I will try downloading with Firefox by itself and verifying the checksums to be sure. Will get back to you - thanks again.
pravus87 said:
I have tried with 7.0 and 7.1 opengapps arm pico but I haven't been doing so during troubleshooting so as to isolate the issue. I tried once with Commotio and once with CarbonROM in case they needed it for some reason, but since no luck, I figure I'll wait to flash gapps once I get a successful boot.
I downloaded all ROMs with Free Download Manager, which does a pretty good job at maintaining file integrity and working through connection hangups, but I will try downloading with Firefox by itself and verifying the checksums to be sure. Will get back to you - thanks again.
Click to expand...
Click to collapse
Happy to help
madbat99 said:
Happy to help
Click to expand...
Click to collapse
I downloaded Commotio and CarbonROM again and verified the md5s. All good there. I wiped everything except OTG again and tried installing from the SD card (formatted as well before the ROMs were copied over). Still stuck on boot animations. I attempt a power button restart after about 10mins a couple times then I let it sit for 30+min without any success.
Hope we haven't reached the end of the line yet. I'm very curious about what could be causing this.
pravus87 said:
I downloaded Commotio and CarbonROM again and verified the md5s. All good there. I wiped everything except OTG again and tried installing from the SD card (formatted as well before the ROMs were copied over). Still stuck on boot animations. I attempt a power button restart after about 10mins a couple times then I let it sit for 30+min without any success.
Hope we haven't reached the end of the line yet. I'm very curious about what could be causing this.
Click to expand...
Click to collapse
Well I'm stumped. Have you tried LineageOS? These ROMs are all based on Lineage. Sometimes there is a bad nightly that refuses to clean flash and it spreads to all other ROMs. Maybe try a build from a few weeks back (or even a month if you can find one) and if that boots then you can update to the newest with a dirty flash.
I see you did try LineageOS and tried some older builds.
Well, I can maybe make a backup of a fresh install after first boot and upload it for you. You can try restoring it on your phone and see if it boots. You would have to have the folders created on your phone (or external sd card). Like
"TWRP/backups/* your phones serial number*/*name of backup*"
Obviously without the quotes and stars and with your devices actual serial number. Only thing is, backups are pretty big files.
madbat99 said:
Well I'm stumped. Have you tried LineageOS? These ROMs are all based on Lineage. Sometimes there is a bad nightly that refuses to clean flash and it spreads to all other ROMs. Maybe try a build from a few weeks back (or even a month if you can find one) and if that boots then you can update to the newest with a dirty flash.
I see you did try LineageOS and tried some older builds.
Well, I can maybe make a backup of a fresh install after first boot and upload it for you. You can try restoring it on your phone and see if it boots. You would have to have the folders created on your phone (or external sd card). Like
"TWRP/backups/* your phones serial number*/*name of backup*"
Obviously without the quotes and stars and with your devices actual serial number. Only thing is, backups are pretty big files.
Click to expand...
Click to collapse
I did not try Lineage or Vanir again like I did Commotio and CarbonROM to verify the md5s. I will try them and some older builds of each.
I sincerely appreciate the offer. I would certainly be willing to download a large backup if you would be willing to take the time to clean install and upload. Let me try the remaining steps you listed first, though. Don't want you to have to spend time doing all that if we can get it working another way.
Thanks again. Will keep you posted!
Downloaded, verified and copied all these files to a freshly formatted SD card, inserted into the phone, booted TWRP 3.1.1-0 and wiped Dalvik / ART Cache, System, Data, Internal Storage, and Cache before each install:
B140-commotio-d2spr-10-17-2017.zip
CARBON-CR-5.1-MOO-RELEASE-d2spr-20171018-0000.zip
cm-11-20150831-SNAPSHOT-XNG3CAO3FN-d2lte.zip
cm-12.1-20151117-SNAPSHOT-YOG7DAO1K7-d2spr.zip
lineage-14.1-20170731-nightly-d2spr-signed.zip
lineage-14.1-20171030-nightly-d2spr-signed.zip
OCT-N-WEEKLY-20170811-2058-d2spr.zip
vanir_d2spr_5.1.1.102615.zip
vanir_d2spr_6.0.122916.zip
vanir_d2spr_7.0.010417.zip
vanir_d2spr_7.1.101817.zip
Only ol' reliable (CM 11 d2lte 8/31/15 snapshot) will boot.
This phone was fully updated with all OTA updates before I ever attempted to root, install a custom recovery or ROM about a year or so ago. I remember having issues even then, not being able to get any CM version to boot except for that one, which was already old at the time.
For kicks, I tried dirty flashing the CM 12 d2spr 11/17/15 snapshot over ol' reliable in hopes that it would boot and I would be able to dirty flash all the way to an Oreo build. It didn't work.
Also, each time I have flashed back to stock to retry, I have used the *NJ2 build.
Not sure if any of that matters, but trying to think of anything that may help pinpoint the issue.
If no other ideas, I would like to take you up on your offer and try a TWRP backup of a fresh install of any recent, stable ROM from you device, if you would be so kind to upload.
Thanks again for the help. For what it is worth, it has been fun troubleshooting this. I'm too afraid to do anything with my S8, but miss the fun I had with my AT&T S3 (never had any issues with custom ROMs, but I also didn't take all the OTA updates) and my AT&T LG G3, which got blue screen disease.
pravus87 said:
Downloaded, verified and copied all these files to a freshly formatted SD card, inserted into the phone, booted TWRP 3.1.1-0 and wiped Dalvik / ART Cache, System, Data, Internal Storage, and Cache before each install:
B140-commotio-d2spr-10-17-2017.zip
CARBON-CR-5.1-MOO-RELEASE-d2spr-20171018-0000.zip
cm-11-20150831-SNAPSHOT-XNG3CAO3FN-d2lte.zip
cm-12.1-20151117-SNAPSHOT-YOG7DAO1K7-d2spr.zip
lineage-14.1-20170731-nightly-d2spr-signed.zip
lineage-14.1-20171030-nightly-d2spr-signed.zip
OCT-N-WEEKLY-20170811-2058-d2spr.zip
vanir_d2spr_5.1.1.102615.zip
vanir_d2spr_6.0.122916.zip
vanir_d2spr_7.0.010417.zip
vanir_d2spr_7.1.101817.zip
Only ol' reliable (CM 11 d2lte 8/31/15 snapshot) will boot.
This phone was fully updated with all OTA updates before I ever attempted to root, install a custom recovery or ROM about a year or so ago. I remember having issues even then, not being able to get any CM version to boot except for that one, which was already old at the time.
For kicks, I tried dirty flashing the CM 12 d2spr 11/17/15 snapshot over ol' reliable in hopes that it would boot and I would be able to dirty flash all the way to an Oreo build. It didn't work.
Also, each time I have flashed back to stock to retry, I have used the *NJ2 build.
Not sure if any of that matters, but trying to think of anything that may help pinpoint the issue.
If no other ideas, I would like to take you up on your offer and try a TWRP backup of a fresh install of any recent, stable ROM from you device, if you would be so kind to upload.
Thanks again for the help. For what it is worth, it has been fun troubleshooting this. I'm too afraid to do anything with my S8, but miss the fun I had with my AT&T S3 (never had any issues with custom ROMs, but I also didn't take all the OTA updates) and my AT&T LG G3, which got blue screen disease.
Click to expand...
Click to collapse
Mine is on nj2 as well. Mine takes a little while to boot, but not hours lol.
I'll see if I can backup a fresh build today. I won't be able to upload until tomorrow (no wifi at home right now). I can likely upload when I get to work, I get there pretty early. I'll pm you a link when it's done.
Really don't know why that's the only thing that will boot for you. It has been fun trying to get it to though.
I'll flash LineageOS (most recent) with open gapps mini. I'll boot to the setup wizard and then make a backup. Hope this works, mostly cause I'm kinda out of ideas, lol.
madbat99 said:
Mine is on nj2 as well. Mine takes a little while to boot, but not hours lol.
I'll see if I can backup a fresh build today. I won't be able to upload until tomorrow (no wifi at home right now). I can likely upload when I get to work, I get there pretty early. I'll pm you a link when it's done.
Really don't know why that's the only thing that will boot for you. It has been fun trying to get it to though.
I'll flash LineageOS (most recent) with open gapps mini. I'll boot to the setup wizard and then make a backup. Hope this works, mostly cause I'm kinda out of ideas, lol.
Click to expand...
Click to collapse
Thank you. No rush - whenever you have time.
I don't get it either. I waited a long time to post about it because I assumed there was something simple I was overlooking that I would eventually figure out. Not sure this will work if nothing else has, but I can't wait to give it a shot.
Hey everyone,
I have been rooted for a LONG time, but have been gone for a year or 2. I have the OnePlus 3 that IS rooted with:
Experience OS R11.0 with
Kernel 3.18.31-perf+
[email protected] #1
7.1.1
OP3_o2_open_18
This one has served me well, but may be a bit obsolete.
What rom and kernel can I use now from 7.1.1 What must I do? I see 8.0 and such, and a host of others. Will I lose everything if I upgrade to a new version? I always do a nandroid, and I have Titanium Backup, which I THINK keeps apps, etc...
I remember having trouble installing Roms way back when. Not sure if it was a TWRP issue, as I also had Philz at one point. ( I Have TWRP now, but not sure which version) I had to use what i have (Which IS a GREAT ROM) because I was afraid to brick my phone, because I had so much trouble getting a rom to load. I constantly remember the little android falling over saying "Leave me the **** alone. If I boot to recovery, I just get the TWRP screen 3.1.0.0 that never opens. It just stays on that page and never opens, so I have to turn off the phone to reboot to turn on
I sincerely apologize for not remembering or keeping up.
Have a great day
wascapsfan said:
Hey everyone,
I have been rooted for a LONG time, but have been gone for a year or 2. I have the OnePlus 3 that IS rooted with:
Experience OS R11.0 with
Kernel 3.18.31-perf+
[email protected] #1
7.1.1
OP3_o2_open_18
This one has served me well, but may be a bit obsolete.
What rom and kernel can I use now from 7.1.1 What must I do? I see 8.0 and such, and a host of others. Will I lose everything if I upgrade to a new version? I always do a nandroid, and I have Titanium Backup, which I THINK keeps apps, etc...
I remember having trouble installing Roms way back when. Not sure if it was a TWRP issue, as I also had Philz at one point. ( I Have TWRP now, but not sure which version) I had to use what i have (Which IS a GREAT ROM) because I was afraid to brick my phone, because I had so much trouble getting a rom to load. I constantly remember the little android falling over saying "Leave me the **** alone. If I boot to recovery, I just get the TWRP screen 3.1.0.0 that never opens. It just stays on that page and never opens, so I have to turn off the phone to reboot to turn on
I sincerely apologize for not remembering or keeping up.
Have a great day
Click to expand...
Click to collapse
Wow.. Not one answer. What happened to the days where you ask a question, you get ridiculed, then many come out of the woodwork to get you on track...
Oh well........
wascapsfan said:
Hey everyone,
I have been rooted for a LONG time, but have been gone for a year or 2. I have the OnePlus 3 that IS rooted with:
Experience OS R11.0 with
Kernel 3.18.31-perf+
[email protected] #1
7.1.1
OP3_o2_open_18
This one has served me well, but may be a bit obsolete.
What rom and kernel can I use now from 7.1.1 What must I do? I see 8.0 and such, and a host of others. Will I lose everything if I upgrade to a new version? I always do a nandroid, and I have Titanium Backup, which I THINK keeps apps, etc...
I remember having trouble installing Roms way back when. Not sure if it was a TWRP issue, as I also had Philz at one point. ( I Have TWRP now, but not sure which version) I had to use what i have (Which IS a GREAT ROM) because I was afraid to brick my phone, because I had so much trouble getting a rom to load. I constantly remember the little android falling over saying "Leave me the **** alone. If I boot to recovery, I just get the TWRP screen 3.1.0.0 that never opens. It just stays on that page and never opens, so I have to turn off the phone to reboot to turn on
I sincerely apologize for not remembering or keeping up.
Have a great day
Click to expand...
Click to collapse
Make sure you have the latest TWRP by Bluspark, it just works flawless for me and alot of other people.
Take a full backup. Wipe system and both cache partitions. Then flash the latest Experience ROM. For the open beta releases I should stick with stock kernel. Otherwise Franco and Flash kernel would be interesting. For root I should go with Magisk. Everyone uses it nowadays and the modules are super handy.
Twrp issues
I have rooted the One Plus 3. I loaded TWRP about a year and a half ago. Now when I try to go into recovery, TWRP comes up, but never opens. I tried removing it, but it wont remove, and I try to reinstall it using several methods including apps, but to no avail. The bootloader is unlocked and the debugging is on. Any suggestions. I can't do a backup or anything.
Thanks
Dave
wascapsfan said:
I have rooted the One Plus 3. I loaded TWRP about a year and a half ago. Now when I try to go into recovery, TWRP comes up, but never opens. I tried removing it, but it wont remove, and I try to reinstall it using several methods including apps, but to no avail. The bootloader is unlocked and the debugging is on. Any suggestions. I can't do a backup or anything.
Thanks
Dave
Click to expand...
Click to collapse
Boot into fastboot, then connect it to your pc and use fastboot flash recovery. Get the latest TWRP.
I tried that, but it won't take. If I had a tar file, I could try it with Odin, but no matter what I do, when I go into bootloader, it says I'm unlocked, then I try to go into recovery, and TWRP shows up, but typically you get the different choices like backup, install, etc... I stay stuck on the TWRP page, that does not do anything, nor does it give me any choices. I have to shut the phone down each time just to get it back to working mode. I tried the adb method using the cmd prompt, and everything works up to trying to actually flashing TWRP...
wascapsfan said:
I tried that, but it won't take. If I had a tar file, I could try it with Odin, but no matter what I do, when I go into bootloader, it says I'm unlocked, then I try to go into recovery, and TWRP shows up, but typically you get the different choices like backup, install, etc... I stay stuck on the TWRP page, that does not do anything, nor does it give me any choices. I have to shut the phone down each time just to get it back to working mode. I tried the adb method using the cmd prompt, and everything works up to trying to actually flashing TWRP...
Click to expand...
Click to collapse
You may have to flash the original recovery by oneplus , you can find it on one plus downloads in google , make sure before you do anything that you backup anything important like photos , videos to a computer , then download the ROM of choice along with the correct gapps for that ROM and the correct firmware ( most ROMs will include the recommended firmware in their post ) , also download the latest twrp recovery from twrp.me and magisk ( if not included in the ROM ) then its just a matter of wiping system , data , cache and dalvick whilst in twrp , install the ROM with the gapps let the ROM boot and setup a few of your settings then go back into twrp and flash magisk manager and you should be good to go , good luck and make sure you fully read the instructions on the ROM page that you want ...
Hello to everyone!
I need help about my s9, few days ago I installed LightROM on my s9(over the TWRP lastest version),everything worked fine,I was curios about installing the other kernel, which I did, I installed(whitewolf kernel) and after that Im not possible to boot my phone into the ROM, in case if LightROM is installed its looping in SAMSUNG logo, if AOSP is installed it boots into Download mode. Dont know why is phone acting this wierd now. Im downloading the default stock rom right now, Ill try to install it with Odin, hope that will reset everything back to normal. Im writing this thread in meantime while Im waiting maybe some of you knows the fix, so I dont have to download the stock rom(firmware).
Tried installing the stock kernel from AROMA installer, it doesnt change anything. If I set TG kernel to be installed, it passes the samsung logo but gives me encryption failed. I tried also installing the by pass for encryption but it gives me error "1" in TWRP.
Hope someone helps,Im out of ideas!
Thanks have a great day(atleast better than mine)