Related
Hello all,
I need some help and guidance in fixing my Kindle Fire. Some background:
My Kindle Fire was on 6.3.1 when I rooted it, no custom roms, just root so I can get Google Framework on it since I use Google Docs and the Google Market. After about a week or so, I decided I wanted to go back to an unrooted Fire so I can get access to my stock book reading app and Instant VOD.
I had FFF and TWRP on my Kindle Fire as well, running Windows 7 64bit Home Premium
After much searching, every unroot guide kept pointing me back to flashing the stock rom. So I downloaded the latest update.zip through KFU, booted into TWRP, wiped, installed the update.zip, and rebooted.
After that, I hit the Kindle Fire logo, static, and it hangs there. I power off and on, still hangs. I don't have the blue/white FFF recovery anymore so booting into recovery wasn't an option. I then connected the Kindle to my computer, opened KFU, and tried to change the boot option through option 1, and every time I change it, Fastboot, Normal boot, etc. it sends the command, Kindle reboots, but then hangs again on the static logo.
I tried reinstalling FFF and TWRP through KFU to try and reflash, but it shows as preparing, then waiting for device, and nothing. Again, just hanging.
I even tried the manual shell commands I've seen around the forums and in the Kindle Fire for Beginners Guide, but I keep hanging on "Waiting for device" in the cmd prompt.
I don't know what else to do and I'm becoming more confused with the different types of issues that everyone is reporting, with each one have one detail different from my situation. I had no custom roms, just a root, and it seems I may have flashed a bad stock rom.
Any help is greatly appreciated. I apologize if this was solved somewhere else, but I searched numerous threads and guides, but they all dealt with something going wrong with a custom rom or people getting to the animated Kindle Fire logo, where as mine is just static.
Again, thank you for your time.
Sounds like it's stuck in fastboot bootmode to this noob. I had the same problem at one point and used command line to fix with the simple bootmode switching commands - can't recall if I used fastboot or adb tools..but either should work. And if I'm reading your post right, you've tried these so this is likely above my meager skill level, heh. You are handling it better than I did, I might add.
If I may point out where you went wrong:
Mattamus Prime said:
After about a week or so, I decided I wanted to go back to an unrooted Fire so I can get access to my stock book reading app and Instant VOD.
Click to expand...
Click to collapse
There are apps in the Google Play store that will temporarily remove your root status so you are able to use services that detect and shut down when root is detected. OTArootkeeper.apk is one that I've heard of.
And don't ever chose to lose fff once you have that as this is your lifeline to unbricking.
Hopefully someone with better chops than I on this will post up - continue with your patient reading and take a little comfort that this is most probably fixable.
First off, I applaud you for trying to figure out and fix the problem yourself using the guides available. Thank you. The information you provided will go a long way to getting the help you need.
So far it seems you've done everything right, but to be sure, you should check to make sure your drivers are in order (most likely the problem). The second post of the Beginners Guide will help you with that.
Once you have done that and you still can't change your bootmode, try using recovery to flash a custom rom. It's possible the stock boot image you have has been corrupted. You can use the "mount" function in recovery to push another rom to your sdcard. If that works you can stick with a custom rom like MoDaCo. It's the same stock stock interface with Google apps and services installed and you don't have to worry about OTA updates. OTA Rootkeeper will let you easily switch between "rooted" and "unrooted" so you can take advantage of Amazon's VOD.
And if you still want pure stock you can d/l a new copy of the update and try again.
Thanks for the suggestion. I did try OTA Rootkeeper, but when I went into my Instant VOD, it still had the buttons grayed out. I tried temp unroot, reboot Kindle, and still grayed out, so I assumed Rootkeeper wasn't working for me, thus, the looking for the unroot tutorials.
A little bit of extra information, when I hook up my Kindle Fire, my drivers says Android Composite ADB Interface. When I try to switch to Fastboot to have it switch to Android ADB Interface, it doesn't switch. It just stays as Composite.
Thanks again.
soupmagnet said:
So far it seems you've done everything right, but to be sure, you should check to make sure your drivers are in order (most likely the problem). The second post of the Beginners Guide will help you with that.
Click to expand...
Click to collapse
I followed the advice in the Beginners Guide, uninstalled whatever drivers I had, rebooted my comp, then installed the ones that came with the KFU download.
Are there any other drivers I should be looking for?
Also, a little bit of more information, I tried switching to Fastboot through KFU, received some messages to the effect of "system/some file name file not found (2)", (I apologize for not being specific, typing from memory), it then reboots my Kindle Fire, then I execute the commands:
fastboot getvar product
After that, it just says <waiting for device>
In fact, after any command I do in cmd, I get that message. So I believe it may be a driver issue, like was suggested, or my Kindle isn't far enough into the boot process to be found.
It definitely sounds like a driver issue. Keep working on your drivers.
If that doesn't work, you can try it on a different computer OR set up a Linux LiveUSB for issuing adb/fastboot commands.
FIX for Kindle stuck on logo
Finally I FIXED MY KINDLE FIRE!!!!
Issue : Kindle Fire stuck on 'Kindle Fire' logo and never moves after that.
Hello All,
Just like others in here, even I tried to upgrade to new version of Android on my kindle and I messed it up very bad.
I have read a post where, some-one just updated that it is because we have enabled fast boot on it and we need to move to regular boot.
However, none of the solutions suggest on this website worked for me (am not saying my friends are wrong in here).
Finally the work around that WORKED for me, and am sure this will be help you all.
When you are wiping/erasing the data/SD card, please do not wide the ROM. If you delete the ROM - Booom!!, you are cutting off the branch yo are
sitting ON )
Now if you have already done that.. please follow the steps.
You have intall/upgrade to a new version of Android.
Make sure you have the TWRP 2.1.x or 2.2.0 installed << which you will have, using that only you wiped off your kindle )
Now download the latest version of Andriod Jelly Bean and Google app on your computer from the following link
http://forum.xda-developers.com/showthread.php?t=1778010
1. Now, boot ur kindle into recovery.
2. Connect your kindle to your computer, if the computer recongnise your kindle paste both files onto kindle, and move to step 6
3. If your kindle is not recognized (like in my case), go to mount option in recovery
4. Choose mount USB
5. Kindle will be recognized in computer, and copy the files.
6. Disconnect Kindle from the computer
7. Wipe data/factory reset
8. Wipe cache
9. Wipe dalvik
10. Install ROM <install Andriod Jelly Bean> Do not install Google Apps
11. Reboot
Once you do a normal reboot, your system will boot into Andriod Jelly Bean edtion. Go to file manager and reach out to Google Apps and install the
application and reboot.
Yes!! you have the complete recoved Kindle
Only known issue - Your battery bar will not move when it is charging (but actually it is charging).
#####################################################################################################
MattamusPrime said:
Hello all,
I need some help and guidance in fixing my Kindle Fire. Some background:
My Kindle Fire was on 6.3.1 when I rooted it, no custom roms, just root so I can get Google Framework on it since I use Google Docs and the Google Market. After about a week or so, I decided I wanted to go back to an unrooted Fire so I can get access to my stock book reading app and Instant VOD.
I had FFF and TWRP on my Kindle Fire as well, running Windows 7 64bit Home Premium
After much searching, every unroot guide kept pointing me back to flashing the stock rom. So I downloaded the latest update.zip through KFU, booted into TWRP, wiped, installed the update.zip, and rebooted.
After that, I hit the Kindle Fire logo, static, and it hangs there. I power off and on, still hangs. I don't have the blue/white FFF recovery anymore so booting into recovery wasn't an option. I then connected the Kindle to my computer, opened KFU, and tried to change the boot option through option 1, and every time I change it, Fastboot, Normal boot, etc. it sends the command, Kindle reboots, but then hangs again on the static logo.
I tried reinstalling FFF and TWRP through KFU to try and reflash, but it shows as preparing, then waiting for device, and nothing. Again, just hanging.
I even tried the manual shell commands I've seen around the forums and in the Kindle Fire for Beginners Guide, but I keep hanging on "Waiting for device" in the cmd prompt.
I don't know what else to do and I'm becoming more confused with the different types of issues that everyone is reporting, with each one have one detail different from my situation. I had no custom roms, just a root, and it seems I may have flashed a bad stock rom.
Any help is greatly appreciated. I apologize if this was solved somewhere else, but I searched numerous threads and guides, but they all dealt with something going wrong with a custom rom or people getting to the animated Kindle Fire logo, where as mine is just static.
Again, thank you for your time.
Click to expand...
Click to collapse
K_Krish said:
Finally I FIXED MY KINDLE FIRE!!!!
Issue : Kindle Fire stuck on 'Kindle Fire' logo and never moves after that.
Hello All,
Just like others in here, even I tried to upgrade to new version of Android on my kindle and I messed it up very bad.
I have read a post where, some-one just updated that it is because we have enabled fast boot on it and we need to move to regular boot.
However, none of the solutions suggest on this website worked for me (am not saying my friends are wrong in here).
Finally the work around that WORKED for me, and am sure this will be help you all.
When you are wiping/erasing the data/SD card, please do not wide the ROM. If you delete the ROM - Booom!!, you are cutting off the branch yo are
sitting ON )
Now if you have already done that.. please follow the steps.
You have intall/upgrade to a new version of Android.
Make sure you have the TWRP 2.1.x or 2.2.0 installed << which you will have, using that only you wiped off your kindle )
Now download the latest version of Andriod Jelly Bean and Google app on your computer from the following link
http://forum.xda-developers.com/showthread.php?t=1778010
1. Now, boot ur kindle into recovery.
2. Connect your kindle to your computer, if the computer recongnise your kindle paste both files onto kindle, and move to step 6
3. If your kindle is not recognized (like in my case), go to mount option in recovery
4. Choose mount USB
5. Kindle will be recognized in computer, and copy the files.
6. Disconnect Kindle from the computer
7. Wipe data/factory reset
8. Wipe cache
9. Wipe dalvik
10. Install ROM <install Andriod Jelly Bean> Do not install Google Apps
11. Reboot
Once you do a normal reboot, your system will boot into Andriod Jelly Bean edtion. Go to file manager and reach out to Google Apps and install the
application and reboot.
Yes!! you have the complete recoved Kindle
Only known issue - Your battery bar will not move when it is charging (but actually it is charging).
#####################################################################################################
Click to expand...
Click to collapse
I think twrp got deleted when I reinstalled the kindle update. So I can't do what you said. When I turn my kindle on it gets stuck at that kindle fire logo. I can't go into recovery or anything. I can't re install twrp because it KFU says my kindle in online but when i click install twrp it says waiting for device.
me too
dynomite16 said:
I think twrp got deleted when I reinstalled the kindle update. So I can't do what you said. When I turn my kindle on it gets stuck at that kindle fire logo. I can't go into recovery or anything. I can't re install twrp because it KFU says my kindle in online but when i click install twrp it says waiting for device.
Click to expand...
Click to collapse
I am stuck at the very same place you are. I was in an endless bootloop after trying to flas back to the Stock Amazon ROM using TWRP. Once i got the drivers sorted out and ADB could see my device i used KFU to "Install permanent Root with Superuser". The KF went to reboot into fastboot and the screen said "waiting for device" for about ten minutes. Now the KF is stuck at the white and orange "kindle Fire" boot logo. Windows will no longer see the KF as an android device. It only shows up as an "unknown device" in the device manager.
Try this
dynomite16 said:
I think twrp got deleted when I reinstalled the kindle update. So I can't do what you said. When I turn my kindle on it gets stuck at that kindle fire logo. I can't go into recovery or anything. I can't re install twrp because it KFU says my kindle in online but when i click install twrp it says waiting for device.
Click to expand...
Click to collapse
Ok, I dont know, how to fix this (as I was not in this situation). Try following the steps - Download update.zip through KFU. Connect your Kindle to PC and install the android driver. If your PC detects the kindle copy update.zip file to kindle and try to install that.
sounds like a job for this http://forum.xda-developers.com/showthread.php?t=1392693&highlight=info
dynomite16 said:
I think twrp got deleted when I reinstalled the kindle update. So I can't do what you said. When I turn my kindle on it gets stuck at that kindle fire logo. I can't go into recovery or anything. I can't re install twrp because it KFU says my kindle in online but when i click install twrp it says waiting for device.
Click to expand...
Click to collapse
Im in the same boat you are. I have tried everything stuck on same logo device is recognized in devices as android phone and adb interface but cannot connect to unbrick utility or KFU and doesnt show as a drive either. tried to search devices in cmd using fastboot commands and nothing shows either. I decided to purchase a factory cable today on ebay. Keeping my fingers crossed because after reading everything I could find I think it is my only option.
No, your problem is as "simple" as fixing your drivers so the computer can communicate with the device through adb and fastboot. KFU relies on those two tools to do pretty much anything. Unfortunately, Windows is stupid and is not very effective when dealing with certain USB devices.
In order to, say, install TWRP, you need adb to change the bootmode to accept fastboot commands, and use fastboot commands to overwrite the recovery partition. In the process of going between different boot modes, Windows had a hissy fit and decides not to communicate with the device at all. Hence the need to fix/reinstall the drivers. It doesn't always work out that way and you get stuck where you are right now. A factory cable will put you in fastboot, but it wont make Windows communicate with the device. You can continue to fight with Windows drivers and hope to get lucky, or you could try other, more effective options...
http://forum.xda-developers.com/showpost.php?p=30629067
omg .... I survived a bricking. Soupkit saved me!!!
Somewhere on the many tabs I have open, as I frantically search for ways to unbrick my Kindle fire... I run into " SoupKit" for Linux ... install it... mess around with the Bootloader .. change it to 4002 I believe the value was ... my Kindle that I've been working on for literally 6 hrs is back on! ... now on the figuring out how to root it / remove demo software. SOUPKIT!
E]
Hey Guys,
I successfully rooted my kindle fire 8.9" a while back and a few days ago decided to follow: http://forum.xda-developers.com/showthread.php?t=2277105 to install the twrp/custom rom.
In fireflash I moved the bootloader back to 8.1.4 and changed the boot and recovery partitions accordingly. I disabled the recovery auto update. I applied the changes and rebooted (I saw the red kindle fire letters and then it changed to the blue letters). It went into the TWRP screen at which point the guide told me to reboot. I found a "reboot to recovery" option and clicked it. Apparently, this was a very bad thing to do. The kindle boots to the Kindle Fire logo in red letters and stays there. it doesn't go blue and nothing moves. It stays that way until I turn it off.
It no longer will show up in Device Manager at all, but if I turn it on while plugged into the computer, the computer makes fast bump sounds like it sees the device for a second.The first time I plugged it into a different computer windows said it was trying to install a driver for "Jem-PVT-Prod-04" but then the driver installation failed and it doesn't show up in the device manager even with an exclamation mark.
Using different adb tools (Minimal adb and fastboot, kindle adb drivers, and android sdk) yields no response from the device even with a factory cable (which I purchased and arrived this morning). Fastboot just says < waiting for device > after the command "fastboot -i 0x1949 getvar product"
Adb kill-server followed by adb devices leads to a blank list of devices. (I also went into user/.android/ to change the adb_usb.ini file to 0x1949 (which it already was)
I tried KFHD SRT v2.1 http://forum.xda-developers.com/showthread.php?t=2011126 but it can't see the device either.
At this point, I don't know what can be done and am open to trying everything.
chickeninferno said:
Hey Guys,
I successfully rooted my kindle fire 8.9" a while back and a few days ago decided to follow: http://forum.xda-developers.com/showthread.php?t=2277105 to install the twrp/custom rom.
In fireflash I moved the bootloader back to 8.1.4 and changed the boot and recovery partitions accordingly. I disabled the recovery auto update. I applied the changes and rebooted (I saw the red kindle fire letters and then it changed to the blue letters). It went into the TWRP screen at which point the guide told me to reboot. I found a "reboot to recovery" option and clicked it. Apparently, this was a very bad thing to do. The kindle boots to the Kindle Fire logo in red letters and stays there. it doesn't go blue and nothing moves. It stays that way until I turn it off.
It no longer will show up in Device Manager at all, but if I turn it on while plugged into the computer, the computer makes fast bump sounds like it sees the device for a second.The first time I plugged it into a different computer windows said it was trying to install a driver for "Jem-PVT-Prod-04" but then the driver installation failed and it doesn't show up in the device manager even with an exclamation mark.
Using different adb tools (Minimal adb and fastboot, kindle adb drivers, and android sdk) yields no response from the device even with a factory cable (which I purchased and arrived this morning). Fastboot just says < waiting for device > after the command "fastboot -i 0x1949 getvar product"
Adb kill-server followed by adb devices leads to a blank list of devices. (I also went into user/.android/ to change the adb_usb.ini file to 0x1949 (which it already was)
I tried KFHD SRT v2.1 http://forum.xda-developers.com/showthread.php?t=2011126 but it can't see the device either.
At this point, I don't know what can be done and am open to trying everything.
Click to expand...
Click to collapse
Just to confirm that you're doing it correctly...have you powered the device completely down, entered 'fastboot -i 0x1949 getvar product', and then turned the device on? And still no luck?
BTW, the factory cable will not work with the KFHD8.9 and can possibly damage it. Don't use it.
soupmagnet said:
Just to confirm that you're doing it correctly...have you powered the device completely down, entered 'fastboot -i 0x1949 getvar product', and then turned the device on? And still no luck?
BTW, the factory cable will not work with the KFHD8.9 and can possibly damage it. Don't use it.
Click to expand...
Click to collapse
Correct, I tried fastboot with the kindle 8.9 off, on,off then on, and on then off. None of these does anything except sit and say < waiting for device >.
Thanks for the heads up on the factory cable. It didn't seem to do anything any different anyway but is unplugged now.
chickeninferno said:
Correct, I tried fastboot with the kindle 8.9 off, on,off then on, and on then off. None of these does anything except sit and say < waiting for device >.
Thanks for the heads up on the factory cable. It didn't seem to do anything any different anyway but is unplugged now.
Click to expand...
Click to collapse
I've run into relatively the same problem with my HD8.9 several times while testing scripts but I've always been able to enable fastboot after rebooting using 'getvar product'. The difference in my case, is that I was always using Linux. You may want to set up a LiveUSB and install the SoupKit from the Dev section and try again to see if it makes a difference. SoupKit is not required, of course, but it is definitely recommended if you're not very familiar with Linux.
chickeninferno said:
Correct, I tried fastboot with the kindle 8.9 off, on,off then on, and on then off. None of these does anything except sit and say < waiting for device >.
Thanks for the heads up on the factory cable. It didn't seem to do anything any different anyway but is unplugged now.
Click to expand...
Click to collapse
Are you running windows??? If you are.... when your kindle is powered down and you type in the fast boot commands, go into device ,manager and see if your kindle shows a yellow triangle next to it. Reply asap.
Sent from my Amazon Kindle Fire HD using Tapatalk HD
Brandonrz said:
Are you running windows??? If you are.... when your kindle is powered down and you type in the fast boot commands, go into device ,manager and see if your kindle shows a yellow triangle next to it. Reply asap.
Sent from my Amazon Kindle Fire HD using Tapatalk HD
Click to expand...
Click to collapse
Brandonrz,
It does not show up in the Device manager when off, when I send fastboot commands, or when on. It will however show up as Jem-PVT-Prod-04 for ~1 second if I have device manager open and I turn on the kindle (regardless of whether or not a fastboot command was sent).
@soupmagnet,
my flashdrive was dead so I just picked up a new one. Putting linux on it now.
chickeninferno said:
Brandonrz,
It does not show up in the Device manager when off, when I send fastboot commands, or when on. It will however show up as Jem-PVT-Prod-04 for ~1 second if I have device manager open and I turn on the kindle (regardless of whether or not a fastboot command was sent).
@soupmagnet,
my flashdrive was dead so I just picked up a new one. Putting linux on it now.
Click to expand...
Click to collapse
For those who may be in same situation here is what I did.
Go to device manager. For that second, try to Right click on Jem-PVT-08 and choose update driver software, then browse my computer for driver software, then let me pick from a list of device drivers on my computer. I moved down list and picked Kindle and it installed as adb composite interface or something like that. Once installed the device manager showed "Kindle" and my fastboot was working. I've had the issue before. I hope this helped!
Glorious Success!
So I ended up doing a combination of the two solutions and since I know how frustrating this was here's how I did it just in case someone stumbles upon this.
How it magically worked:
1.) Inside of Linux Mint, I installed Soupkit
2.) In terminal i typed "fastboot -i 0x1949 getvar product"
-----The kindle reacted for the first time in a long time and went into fasboot mode. Since I had no idea where to put the boot.img or recovery.img in linux to send them but the fastboot or adb commands, I decided to risk it and move to windows.
3.) I unplugged the kindle
4.) Booted into Win 7 x64
5.) The fastboot wasn't working in windows but I checked device manager and the exclamation mark was lingering. I manually picked the driver of amazon.com/kindle and it installed the adb composite device. Fastboot now works in windows.
5.) ran SR Tool.bat in the KFHD_SRT_2.1 folder and chose option 1 (Enable Fastboot)
-----Success
6.)in SR Tool i chose option 4 (erase cache and userdata)
----Took ~4 minutes but success
7.) in cmd I navigated to my sdk platform tools folder by typing "cd C:\Users\<username>\Desktop\SDK\adt-bundle-windows-x86_64-20130522\sdk\platform-tools"
8.) I downloaded the boot.img and recovery.img linked here (http://forum.xda-developers.com/showthread.php?t=2011126) and placed them into C:\Users\<username>\Desktop\SDK\adt-bundle-windows-x86_64-20130522\sdk\platform-tools\
9.) in the cmd from step 7 I sent the following commands "fastboot -i 0x1949 flash boot boot.img" and "fastboot -i 0x1949 flash recovery recovery.img"
----Great Success
10.) In SR Tool I chose option 6 (reboot normally)
-----It looped for ~2 minutes but eventually booted like normal but the SR_Tool asked me to make sure that adb was enabled before clicking enter. I enabled it on the device but SR Tool still didn't seem to see that I had done it. Since it rebooted normally, I didn't really care.
11.) The kindle upgraded itself after I set it down to type this response to 8.4.3
I probably could have easily done this is linux, but I didn't know where to put the boot.img and recovery.img. Also, I'm guessing that the system.img is put back on the device when I used the KFHD SRT but I'm not sure.
Now I'm going for round two to get CM 10.1 put on this thing!
Thanks for all of the help. I really thought that I had actually managed to brick the nearly unbrickable kindle fire 8.9"
Congrats on your success and thanks for sharing the experience!
I think one problem with Windows is that, "fastboot -i 0x1949 getvar product" does not work very well on putting the kindle to fastboot if the device driver is not properly installed, kindle will simply bypass the fastboot step and continue(and hang), the whole situation is a dead loop on Windows if the fastboot driver is having problem and the kindle can't boot into the ROM, and to make things even worse, there is no factory cable for HD8.9
So the SoupKit is a real life saver here.
I had the same sort of driver problem after I installed the second bootloader. For me the simple fix was to go into device manager (In Windows 7), uninstall whatever driver was there with the yellow triangle and then reinstall the official kindle adb driver. Congrats on getting it fixed though. It's a great feeling, I know.
Worked form me too!
Brandonrz said:
For those who may be in same situation here is what I did.
Go to device manager. For that second, try to Right click on Jem-PVT-08 and choose update driver software, then browse my computer for driver software, then let me pick from a list of device drivers on my computer. I moved down list and picked Kindle and it installed as adb composite interface or something like that. Once installed the device manager showed "Kindle" and my fastboot was working. I've had the issue before. I hope this helped!
Click to expand...
Click to collapse
Thanks much for your pointer. In my case the Kindle showed up as an "Other devices" and I was able to use "browse my computer ..."->"let me pick from a list"->Kindle fire->ADB(ver 1.3).
You are awesome.
DBMmn said:
Thanks much for your pointer. In my case the Kindle showed up as an "Other devices" and I was able to use "browse my computer ..."->"let me pick from a list"->Kindle fire->ADB(ver 1.3).
You are awesome.
Click to expand...
Click to collapse
I'm so glad I could help, it was so frustrating for me.
Brandonrz said:
Are you running windows??? If you are.... when your kindle is powered down and you type in the fast boot commands, go into device ,manager and see if your kindle shows a yellow triangle next to it. Reply asap.
Sent from my Amazon Kindle Fire HD using Tapatalk HD
Click to expand...
Click to collapse
Im stuck RIGHT here. manually entered fastboot, with the device showing as JEM-PVT-Prod 4. Unable to re-install recovery because <waiting on device>. Please help.
Tyler9097 said:
Im stuck RIGHT here. manually entered fastboot, with the device showing as JEM-PVT-Prod 4. Unable to re-install recovery because <waiting on device>. Please help.
Click to expand...
Click to collapse
Try kingo root or towel root. I believe they might be easier.
Sent from my Nexus 6P using Tapatalk
Brandonrz said:
Try kingo root or towel root. I believe they might be easier.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Turned out it was a driver compatibility issue with Windows 10. It doesn't recognize the Kindle HD 8.9 properly. Moved it over to a Windows 7 machine and it was working, up until i attempted to flash a new recovery and boot .img . Now it's stuck on the red Kindle logo and computer won't pick up the USB. Halp!
Tyler9097 said:
Turned out it was a driver compatibility issue with Windows 10. It doesn't recognize the Kindle HD 8.9 properly. Moved it over to a Windows 7 machine and it was working, up until i attempted to flash a new recovery and boot .img . Now it's stuck on the red Kindle logo and computer won't pick up the USB. Halp!
Click to expand...
Click to collapse
Power off the Kindle, type fastboot -i 0x1949 getvar product , plug in the Kindle when you get <waiting for device>, and flash the 2nd bootloader, recovery, and freedom-boot images as directed in Hashcode's thread. Skip to step 5 after downloading the files, as we're already in fastboot mode at this point.
Also, Windows 10 enforces driver signatures, so you'll need to disable that before proceeding with the Kindle driver installation.
Sent from my Amazon Jem using XDA Labs
hi.
after i rooted my kindle with success i restarted it and it stack to the boot logo screen.i cant see the kindle anymore as a device in the computer.when i connect my kindle it appears for 1 second to the hardware devices and then disappears.so i cant send any command through fastboot.anyone has any idea what to do so i can fix the kindle?i ve tried everything there is in this forum but with no luck
Try running this with your kindle unplugged and off,
fastboot -i 0x1949 getvar product
Once u run that it should say waiting for device, now plug the kindle in, and if it doesn't automatically power on, then power it on. It should go into fast boot I think. I am a bit unsure if it will because of the fact I don't own an 8.9" kindle, but I think I remember this method didn't work on the 7" model, but read it was more so intended for the 8.9" model. This would probably be more likely to work on Linux, because if you haven't installed the adb drivers before on fast boot, then I don't think windows will finish installing them before then device disconnects, but that's just what I think. Post results plz.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
I agree that it's probably a problem with the fastboot drivers not being installed on your PC, so the tablet leaves fastboot mode.
Does the Composite ADB Interface driver on the 2nd bootloader guide include fastboot driver? Perhaps if you install it as a legacy device via device manager without the device connected, it will connect after?
Personally I had difficulty installing these drivers as I'm on Windows 8 which disables installing drivers that arent digitally signed by default, if you use this OS then you need to toggle this via advanced startup options first.
O yea I know windows 8 is a total pain when it comes to unsigned drivers, had to deal with that on my friends pc. You can always try an Ubuntu live CD since the drivers won't be an issue. Is it staying on the non animated logo or the animated kindle logo after the device disappears?
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
O yea I know windows 8 is a total pain when it comes to unsigned drivers, had to deal with that on my friends pc. You can always try an Ubuntu live CD since the drivers won't be an issue. Is it staying on the non animated logo or the animated kindle logo after the device disappears?
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
the device disappears after one second from the hardware devices.it is staying on the non animated logo forever till the battery is dead.i have tried everything.i have installed the drivers with no problem and i even rooted the kindle.but after i restarted it the problem appeared.i ve tried to run the command with the kindle unpluged but when i plug it to the computer nothing happens.i tried usb2 and usb 3 ports, i tried windows 7 and windows 8 and pretty much everything i found here in the forum.still no luck
First off, your device is not in fastboot. Second, it is very unlikely that rooting alone would cause your device to hang at the Kindle Fire logo. Is there anything else that you attempted to do to your device before this happened?
Before getting to the appropriate solution, it would be beneficial to know what you used to root your device, whether or not you tried installing a custom bootloader/recovery, and what device you have in the first place.
i have a kindle fire hd 8.9" with 4.1 in it. i have followed this guide http://forum.xda-developers.com/showthread.php?t=2277105 so i can have root access. i used the binary method for the rooting.after i succesfully rooted the kindle i installed the astro file manager just for testing the root and it worked.then i followed the steps for installing the 2nd bootloader with twrp. it installed succesfully and i was able to boot in twrp mode. then i restart the kindle then it stack in the logo.thats pretty much all
doltrin said:
i have a kindle fire hd 8.9" with 4.1 in it. i have followed this guide http://forum.xda-developers.com/showthread.php?t=2277105 so i can have root access. i used the binary method for the rooting.after i succesfully rooted the kindle i installed the astro file manager just for testing the root and it worked.then i followed the steps for installing the 2nd bootloader with twrp. it installed succesfully and i was able to boot in twrp mode. then i restart the kindle then it stack in the logo.thats pretty much all
Click to expand...
Click to collapse
Now we're getting somewhere. You should do as stunts says to get your device booted into fastboot (see below)
stunts513 said:
Try running this with your kindle unplugged and off,
fastboot -i 0x1949 getvar product
Once u run that it should say waiting for device, now plug the kindle in, and if it doesn't automatically power on, then power it on. It should go into fast boot
Click to expand...
Click to collapse
If that doesn't work, you need to either fix your drivers in Windows, or use Linux (I believe he mentioned that as well)........Those are your only two options.
You'll need fastboot restore the partition images you saved in step one of the 2nd bootloader thread and start over.
at last.thanks a lot mate for your time and the tool you have created.i installed ubuntu then i used the soupkit and it finally went into fastboot mode and then i used kffirst aide and managed to make kindle work again.thanks so much.now i will try again to load the 2nd bootloader and install a custom rom.
Hey everyone
I think I've just bricked brand new Kindle Fire HD 8.9 :/
So, I'm new in rooting and I tried to install custom rom Cyanogen Mod 10.1 following the instructions from there: http://rootkindlefire.com/kindle-fi...-kindle-fire-hd-8-9-into-pure-android-tablet/ .
After rooting Kindle, installing 2nd bootloader and TWRP my Kindle rebooted. It showed up Kindle Fire logo, first yellow then blue one. But after that nothing happened, it stucked at booting. So I entered to recovery mode by holding down volume up button and because of my stupidity I thought backing up system and restoring it will get me able to enter to original Amazon's system. After restoring system and rebooting worse thing happened. Logo while booting didn't turn from yellow to blue, it just stucked in yellow logo like it freezed. Now I can't enter anywhere in my Kindle, even in recovery mode and after plugging Kindle to PC through USB cable PC doesn't see Kindle. I think maybe using fastboot cable will help but I'm not sure about that, so I'm asking You: Is there anything I can do to restore my Kindle? And the fastboot cable will work with this software: http://forum.xda-developers.com/showthread.php?t=2011126?
Thanks for any help
Sorry for my bad english
Gunter_Time said:
Hey everyone
I think I've just bricked brand new Kindle Fire HD 8.9 :/
So, I'm new in rooting and I tried to install custom rom Cyanogen Mod 10.1 following the instructions from there: http://rootkindlefire.com/kindle-fi...-kindle-fire-hd-8-9-into-pure-android-tablet/ .
After rooting Kindle, installing 2nd bootloader and TWRP my Kindle rebooted. It showed up Kindle Fire logo, first yellow then blue one. But after that nothing happened, it stucked at booting. So I entered to recovery mode by holding down volume up button and because of my stupidity I thought backing up system and restoring it will get me able to enter to original Amazon's system. After restoring system and rebooting worse thing happened. Logo while booting didn't turn from yellow to blue, it just stucked in yellow logo like it freezed. Now I can't enter anywhere in my Kindle, even in recovery mode and after plugging Kindle to PC through USB cable PC doesn't see Kindle. I think maybe using fastboot cable will help but I'm not sure about that, so I'm asking You: Is there anything I can do to restore my Kindle? And the fastboot cable will work with this software: http://forum.xda-developers.com/showthread.php?t=2011126?
Thanks for any help
Sorry for my bad english
Click to expand...
Click to collapse
(if you're bricked, you need fastbootcable?). that what i was told anyways
OK good news, you don't need a fastboot cable, in fact they don't even work on 8.9" models. The only problem is if you never have put the device in fastboot before while plugged into windows you are going to have a fun time trying to install the drivers... More or less plug the device is while it is off and have the device manager open already, you should see a jem device with a yellow triangle pop up for a moment, this is what you have to do, download the drivers in my signature and extract them somewhere. Now when that device pops up briefly, right click it, hit update drivers, and point it to where you extracted my drivers. If you can successfully complete this step the rest is easy, you just need to download a utility, like the one you asked if it would fix it(the answer is yes BTW). Extract the utility from its' zip file, hold shift and right click the folder that was extracted and hit "open command window here". Now with the device turned off and unplugged type this
Code:
fastboot -i 0x1949 getvar product
Press enter, once it says waiting for device then plug the kindle in while its off, it should go into fastboot. Once in fastboot you can use the SRT utility to fix it or kffa if you prefer.
Post above mine also makes skipping the entire try-to-install-driver-while-disappearing problem go away, instead you would reboot into windows after it goes into fastboot, still install the driver, and just run SRT.
Sent from my Amazon Kindle Fire HD using Tapatalk
stunts513 said:
OK good news, you don't need a fastboot cable, in fact they don't even work on 8.9" models. The only problem is if you never have put the device in fastboot before while plugged into windows you are going to have a fun time trying to install the drivers... More or less plug the device is while it is off and have the device manager open already, you should see a jem device with a yellow triangle pop up for a moment, this is what you have to do, download the drivers in my signature and extract them somewhere. Now when that device pops up briefly, right click it, hit update drivers, and point it to where you extracted my drivers. If you can successfully complete this step the rest is easy, you just need to download a utility, like the one you asked if it would fix it(the answer is yes BTW). Extract the utility from its' zip file, hold shift and right click the folder that was extracted and hit "open command window here". Now with the device turned off and unplugged type this
Code:
fastboot -i 0x1949 getvar product
Press enter, once it says waiting for device then plug the kindle in while its off, it should go into fastboot. Once in fastboot you can use the SRT utility to fix it or kffa if you prefer.
Post above mine also makes skipping the entire try-to-install-driver-while-disappearing problem go away, instead you would reboot into windows after it goes into fastboot, still install the driver, and just run SRT.
Sent from my Amazon Kindle Fire HD using Tapatalk
Click to expand...
Click to collapse
I did everything like you said, and voila! Kindle works fine now
Thanks for the help
stunts513 said:
OK good news, you don't need a fastboot cable, in fact they don't even work on 8.9" models. The only problem is if you never have put the device in fastboot before while plugged into windows you are going to have a fun time trying to install the drivers... More or less plug the device is while it is off and have the device manager open already, you should see a jem device with a yellow triangle pop up for a moment, this is what you have to do, download the drivers in my signature and extract them somewhere. Now when that device pops up briefly, right click it, hit update drivers, and point it to where you extracted my drivers. If you can successfully complete this step the rest is easy, you just need to download a utility, like the one you asked if it would fix it(the answer is yes BTW). Extract the utility from its' zip file, hold shift and right click the folder that was extracted and hit "open command window here". Now with the device turned off and unplugged type this
Code:
fastboot -i 0x1949 getvar product
Press enter, once it says waiting for device then plug the kindle in while its off, it should go into fastboot. Once in fastboot you can use the SRT utility to fix it or kffa if you prefer.
Post above mine also makes skipping the entire try-to-install-driver-while-disappearing problem go away, instead you would reboot into windows after it goes into fastboot, still install the driver, and just run SRT.
Sent from my Amazon Kindle Fire HD using Tapatalk
Click to expand...
Click to collapse
hey i cannot kind a download for this tool anywere i screwedup my bootloader and recovery img.. now i need help my device only recognized for 3 seconds.
then loop loop and stock recovery mode which dont work.
plz help pm me a link or anything. ugh i bricked this uggh
Download kindle fire first aid or system restore tool, they come with fastboot and adb.
Sent from my Amazon Kindle Fire HD using Tapatalk
vIgGeN7 said:
hey i cannot kind a download for this tool anywere i screwedup my bootloader and recovery img.. now i need help my device only recognized for 3 seconds.
then loop loop and stock recovery mode which dont work.
plz help pm me a link or anything. ugh i bricked this uggh
Click to expand...
Click to collapse
Here is a tutorial that will show you how to install a 2nd bootloader and TWRP recovery.
2nd bootloader/TWRP install http://forum.xda-developers.com/showthread.php?t=2128175
Then choose a ROM made for the 8.9 Kindle Fire HD only and flash it.
If you wish to go stock then flashing the appropriate images in fastboot will be your plan. This requires setting up some SDK tools in your environment.
SDK setup video http://m.youtube.com/watch?v=oaNM-lt_aHw
KFFA is another option as well.
Sent from my Nexus 7 Flo running Odex SinLess ROM 4.4.2 with ElementalX kernel using XDA Premium 4 mobile app
Kindle Fire HD 8.9 Bricked
Can someone please provide me with some information. I tried to update the recovery for my Kindle Fire HD 8.9 running on cm10.2 using flashify which I found out now was a very lazy and dumb thing to do. Now my device is bricked its stuck at the white and orange kindle logo, my computer only recognize it for a split second and I can't boot into recovery.
My question to the experience members is if my device is done for or can the factory cable restore it? I tried creating one but it didn't get my device into fastboot mode and I also heard that it isn't compatible with the 8.9 series, I would like to know how true this is.
Thanks a lot.
You don't use a fastboot cable with a 8.9. It should when plugged in while off show up for a brief moment as a jem device. In this brief moment you must have the device manager open and right click the jem device hit update drivers and point it to where you would have downloaded and extracted the drivers in my signature. Once you manage to get the drivers installed shut off the kindle and open a command prompt that's CD'd into the directory of the fastboot command and run
Code:
fastboot -I 0x1949 getvar product
it should say waiting for device, at this point plug the kindle in with a normal cable and it should go into fastboot. I recommend a ubuntu live CD for this procedure because you don't have to deal with the driver issue, instead you just have to install the fastboot binary from the repo but it is fairly easy.
Sent from my Amazon Tate using Tapatalk
stunts513 said:
You don't use a fastboot cable with a 8.9. It should when plugged in while off show up for a brief moment as a jem device. In this brief moment you must have the device manager open and right click the jem device hit update drivers and point it to where you would have downloaded and extracted the drivers in my signature. Once you manage to get the drivers installed shut off the kindle and open a command prompt that's CD'd into the directory of the fastboot command and run
Code:
fastboot -I 0x1949 getvar product
it should say waiting for device, at this point plug the kindle in with a normal cable and it should go into fastboot. I recommend a ubuntu live CD for this procedure because you don't have to deal with the driver issue, instead you just have to install the fastboot binary from the repo but it is fairly easy.
Sent from my Amazon Tate using Tapatalk
Click to expand...
Click to collapse
Thanks a lot man I completely gave up and was ready to order the motherboard. Now my kindle fire hd is up and running cm11 :good: :laugh:
unbrick for dummy
Kemoid said:
Thanks a lot man I completely gave up and was ready to order the motherboard. Now my kindle fire hd is up and running cm11 :good: :laugh:
Click to expand...
Click to collapse
stunts513
Can you explain step by step for techno-peasants how to fix my Kindle fire HD 8.9?
It flashes the words "kindle fire" for 14 seconds then goes dark and won't to anything else. I tried holding in the power button for 20; 30;40;60 seconds and that whole thing. I tested the charge in the battery. I'm past the easy fixes.
I'm at the point Kemoid was at above, ready to throw my Kindle Fire away and buy a new one.
I need the idiot proof directions that start with words similar to "Go to ww.somemagicURLwhereIcangetwhatIneedtodiagnoseandfixmyKindefireHD8.9.com and download xxxxxxxxxxxxx.xxx to your computer, then....."
Assume downloading an app reaches the limits of my technical comfort level.
Can you help me?
JoyousM said:
stunts513
Can you explain step by step for techno-peasants how to fix my Kindle fire HD 8.9?
It flashes the words "kindle fire" for 14 seconds then goes dark and won't to anything else. I tried holding in the power button for 20; 30;40;60 seconds and that whole thing. I tested the charge in the battery. I'm past the easy fixes.
I'm at the point Kemoid was at above, ready to throw my Kindle Fire away and buy a new one.
I need the idiot proof directions that start with words similar to "Go to ww.somemagicURLwhereIcangetwhatIneedtodiagnoseandfixmyKindefireHD8.9.com and download xxxxxxxxxxxxx.xxx to your computer, then....."
Assume downloading an app reaches the limits of my technical comfort level.
Can you help me?
Click to expand...
Click to collapse
Your in a bootloop. Just use the factory restore tool for the 8.9 and your USB cord.
I'm thinkin your kernel is messed up, probably just needs reflashing, I agree with LinearEquation, you just need to use the system restore tool or kffa and it should reflash that, if you can get into fastboot though you might need to wipe your boot partition. Try the SRT first though.
My kindle still brick
mr.galaxys said:
(if you're bricked, you need fastbootcable?). that what i was told anyways
Click to expand...
Click to collapse
thank for your share, but my kinlde fire hd 8.9 still brick
Before, i rooted and install TWRP . But, I install stock rom form amazon ( 8.5.1) and after, I update superuser and restart it. red screen appear. And now, I try anything to unbrick but nothing change.
you can see my brick youtube.com/watch?v=kJzsZKF5OUk ( I dont enough post to up youtube)
so, Please help me this case.
Thank you very much !!!
Hi, I just recently got a Kindle Fire HD 8.9 and decided that I wanted to flash CM 11 onto it. Well I followed the steps of a tutorial up until the point where I have to flash a second bootloader and TWRP Recovery. I flashed and installed the script, but accidentally clicked the option to turn off and go into recovery mode or something. Now my Kindle is stuck in a boot loop where the Fire in kindle fire is red. The logo stays for a couple seconds then the kindle just restarts itself.
I've tried to go into fastboot mode using the command prompt "fastboot -i 0x1949 getvar product" but when I connect my device, the computer does not see a thing. I do not know what else I can do at this point. I've looked up and read countless forums, but nothing has worked. Is there any way for me to recover my Kindle?
If it hasn't ever been in fastboot mode before while hooked up tot hat PC and had the drivers installed then it is precisely that reason the command is not working, because the drivers ade not installed. You can try to install them if that is the case, you just have to be fast and update the driver while the device is first plugged in and showing up for a brief moment. I personally recommend using a ubuntu 13.10 CD for this kinda case because of how Linux's driver system works you Don,t have to do anything, the driver already loads up when you plug it in.
Sent from my Amazon Kindle Fire HD using Tapatalk