Hello to everyone !
ClockWorkMod Recovery v6.0.3.7 - English language !!!
About :
- based on CyanogenMod 10.1 ( android 4.2.2 ! )
- you can install custom rom, wipe cache , dalvik-cache , data/factory reset, backup & go on ... !
- mount external storage on USB is not work on this release ;
- you can boot in recovery by pressing Volume-up or Volume-down after you'll see the led red blinked !
Change log :
Renamed CWM-based Recovery to ClockworkMod Recovery !
setting properly fonts for 720p device !
Downloads :
CWM Recovery v6.0.3.7 -> update_cwm6037.zip md5 : 3799816bf728a4a1c9a684a087055fdd !
Installation :
copy update.zip on your external sdcard !
go to CWM Recovery 6.0.3.6 or CWM Touch Recovery ;
install zip -> choose zip from external sdcard ;
go to update_cwm6037.zip -> Yes , install "update_cwm6037.zip" !
reboot system now -> choose No or +++ Go Back +++ !!!
Known Bugs :
can not mount /sdcard aka internal storage !
can not restore backup !
This recovery is not Touch recovery !
Get in this CWM Recovery by pressing a few times on Volume-Up or Volume-Down after the led red blinked !!!
This CWM Recovery will not affect your device, because it will not rewrites the recovery partition !!!
If your device not boot into CWM-based Recovery , or you do not see the red led blinked - please send me by PM ( instead pastebin ) this files : /cache/chargemon/chargemon.log & /cache/chargemon/chargemon.log.old ! Thanks !
--- since this is the test release - may contain bugs - I'll hope to solve on the next updates ---
regards,
Surdu Petru
ClockWorkMod Recovery v6.0.3.6 - English language !!!
Downloads :
CWM-based Recovery v6.0.3.6 -> update.zip md5 :e86b1c9b78861e3fe17aeac152635c4a
Installation :
you need alraedy installed CWM Touch Recovery !
copy update.zip on your device ;
go to CWM Touch Recovery ;
go to install zip and choose "update.zip" !
reboot & enjoy !!!
regards,
Surdu Petru
Why not touch i had nice touch b4 .. oochh how do i get it back ?
Is backup (and restore) fully working? I want to try some of the newer roms but dont want to give up my b106.
Sent from my HUAWEI P6-U06 using Tapatalk 4
How is it possible that I have two recoveries that i can enter in? first is this one pressing vol buttons then second is recovery touch from app
GalaxySIIII said:
How is it possible that I have two recoveries that i can enter in? first is this one pressing vol buttons then second is recovery touch from app
Click to expand...
Click to collapse
Yes, you can use the both recovery...take a look in OP!
Good luck !
surdu_petru said:
Yes, you can use the both recovery...take a look in OP!
Good luck !
Click to expand...
Click to collapse
touch is way better..
edit : why when i try update zip from internal storage it says no files and i cant go even back in cwm i have to hold long pwr button press? it is same in both your ant that touch ..
ZeroWingUK said:
Is backup (and restore) fully working? I want to try some of the newer roms but dont want to give up my b106.
Sent from my HUAWEI P6-U06 using Tapatalk 4
Click to expand...
Click to collapse
Hi!
I tried to install a custom ROM and than I maked a backup successfully!
I not tested yet restory ... I'm a little busy now . I'll back soon ...
Also I'll make a tut for how you can uninstall this recovery!
surdu_petru said:
Hi!
I tried to install a custom ROM and than I maked a backup successfully!
I not tested yet restory ... I'm a little busy now . I'll back soon ...
Also I'll make a tut for how you can uninstall this recovery!
Click to expand...
Click to collapse
I've updated ramdisk with the touch recovery branch, I will add it here but use at your own risk. Feel free to add it against your thread if you wish surdu_petru.
Since this is using a similar method to our previous I don't see how any harm could come from it.
Stickman89 said:
I've updated ramdisk with the touch recovery branch, I will add it here but use at your own risk. Feel free to add it against your thread if you wish surdu_petru.
Since this is using a similar method to our previous I don't see how any harm could come from it.
Best Regards,
s89
Click to expand...
Click to collapse
Hi!
Thanks, I'll update my OP soon !
Good luck !
Update details !
Sorry for my OP info " - first, this is my first custom recovery made by me !!! " ! wrong
This recovery was my first custom recovery !
- but it is also true, because is the first recovery for this device !
Stickman89 said:
I've updated ramdisk with the touch recovery branch, I will add it here but use at your own risk. Feel free to add it against your thread if you wish surdu_petru.
Since this is using a similar method to our previous I don't see how any harm could come from it.
Click to expand...
Click to collapse
Whoops added wrong files, it's actually non-touch recovery... Correcting to Touch Recovery.
surdu_petru said:
Hi!
Thanks, I'll update my OP soon !
Good luck !
Click to expand...
Click to collapse
Corrected, it can now run Touch Recovery I've just installed and tested. Everything appears to be working. Including Backup.
When rebooting from CWM Touch Recovery Bootloader Version ensure you select no when prompted - No, Yes and Go back. If you select yes it wipes the scripts required for this method to run meaning you will need to redo the CWM installation again. However option "No" retains those required files even on reboot from CWM.
@surdu_petru - We need to collaborate our efforts with xda member kholk you can follow his progress to implement kexec support here for the Honor 2 which has near identical HW to us.
I messaged kholk already and received a swift response via PM stating that work is still in the early stages and when further information and progress has been made he'd like to join efforts with myself in order to yield the same for the P6.
In the meantime your nifty boot script allowing boot-time user intervention in order to access recovery has taken the frustrating part of developing for our device away.
You might have noticed I have added your development with my amended Touch Recovery update to my existing thread here. I have credited you along with a link back here in order to rightfully state ownership of your findings and work. If there are any issues don't hesitate to PM me and I will happily take down any links of concern.
Stickman89 said:
@surdu_petru - We need to collaborate our efforts with xda member kholk you can follow his progress to implement kexec support here for the Honor 2 which has near identical HW to us.
I messaged kholk already and received a swift response via PM stating that work is still in the early stages and when further information and progress has been made he'd like to join efforts with myself in order to yield the same for the P6.
In the meantime your nifty boot script allowing boot-time user intervention in order to access recovery has taken the frustrating part of developing for our device away.
You might have noticed I have added your development with my amended Touch Recovery update to my existing thread here. I have credited you along with a link back here in order to rightfully state ownership of your findings and work. If there are any issues don't hesitate to PM me and I will happily take down any links of concern.
Click to expand...
Click to collapse
Hello!
Thank you very much !
If we can run kexec kernel on our device is equal with : we can run CyanogenMod on our device!
Also he made kexec kernel on Motorola Droid RAZR locked boot loader...!!!
I have this device expressed for development...so I'll do all for running on our device AOSP based ROMs!
Good luck and have a nice day! :highfive:
surdu_petru said:
Yes, you can use the both recovery...take a look in OP!
Good luck !
Click to expand...
Click to collapse
how to uninstall that your non touch now? i dont want it i have touch ..
GalaxySIIII said:
how to uninstall that your non touch now? i dont want it i have touch ..
Click to expand...
Click to collapse
Hi!
Please remove from your device :
- /system/bin/recovery.sh & /system/bin/recovery.tar !
( you can do it by using any explorer with root support ! )
Good luck !
surdu_petru said:
Hi!
Please remove from your device :
- /system/bin/recovery.sh & /system/bin/recovery.tar !
( you can do it by using any explorer with root support ! )
Good luck !
Click to expand...
Click to collapse
ok thanx
surdu_petru said:
Hi!
Please remove from your device :
- /system/bin/recovery.sh & /system/bin/recovery.tar !
( you can do it by using any explorer with root support ! )
Good luck !
Click to expand...
Click to collapse
but it returns the original android recovery or CWM Touch? thx
Related
Hey guys.
Koush has been hard at work with his new recovery for The One-x.
A lot of his testing is done in our own IRC Channel #HTC-one-X on Freenode
Link to the latest Official recovery:
http://download.clockworkmod.com/recoveries/recovery-clockwork-touch-5.8.4.0-endeavoru.img
MD5: 147B081A8FD9216FA62244031E44DF88
You need to flash in fastboot by using the command fastboot flash recovery nameofrecovery.img
Charging Issues Fixed !!!
ALL USB related issues fixed !!!
Make sure you are on 5.8.4.0 or later (Check from recovery!!)
All stock recovery versions can be found here:
Stock HTC Recovery Use right mouse click > save as! otherwise it will just open in your browser
Thanks to ARHD Team for hosting.
Known Issues:
Led light might be off in recovery but device charges
Cant flash Recovery from OS
Cant flash boot.img from recovery
Enjoy
Thanks To:
Koush for the recovery.
RichardTrip for patching the kernel to allow usb in recovery.
Dees_Troy for the Mount USB Storage toggle fix.
Toastcfh for the charging fix and overall involvement in fixing all issues
Great news .. Thanks
awesome news to wake up to!
Great news!
OP, after fastbooting the official CWM recovery image, does this mean we can use the ROM manager app already and we can start those flashing/backup/restore from there?
Also I noticed in their site, it is still version 5.8.2.3, the one you posted is more updated version 5.8.2.4.
Awesome to see some official love Whilst it doesn't do a whole lot more than the interim recoveries,, I assume we will be getting more work done on it too!
M.
mattman83 said:
Awesome to see some official love Whilst it doesn't do a whole lot more than the interim recoveries,, I assume we will be getting more work done on it too!
M.
Click to expand...
Click to collapse
Really a great news, Thanks bro!
Successfully flashed, thanks man!
Great, Thx !
Yuss! Great news!!
Still gonna hold out for few weeks, though...pretty sure S-Off will be just around the corner and then it'll really be on for young and old!!
Thanks. What is the diffrence with http://forum.xda-developers.com/showthread.php?t=1579797 this version?
Rycon33 said:
Great news!
OP, after fastbooting the official CWM recovery image, does this mean we can use the ROM manager app already and we can start those flashing/backup/restore from there?
Also I noticed in their site, it is still version 5.8.2.3, the one you posted is more updated version 5.8.2.4.
Click to expand...
Click to collapse
Yes you can use Rom manager for that. It isnt able to flash a new recovery yet, but other options work. 5.8.2.4 is the latest beta version not yet posted on clockworkmod site.
mattman83 said:
Awesome to see some official love Whilst it doesn't do a whole lot more than the interim recoveries,, I assume we will be getting more work done on it too!
M.
Click to expand...
Click to collapse
It is much more stable than the interim recovery and more work will be done to it.
broncogr said:
Yes you can use Rom manager for that. It isnt able to flash a new recovery yet, but other options work. 5.8.2.4 is the latest beta version not yet posted on clockworkmod site.
Click to expand...
Click to collapse
Excellent! I'll try this later on ARHD's next update.
Sent either from my Arc or One X using xda premium
geovass said:
Thanks. What is the diffrence with http://forum.xda-developers.com/showthread.php?t=1579797 this version?
Click to expand...
Click to collapse
The name of the thread itself states the difference. This one's official and the previous one was interim
Sent from my HTC One X using XDA
I think no difference at the moment.
This recovery has problem with AROMA installer ROM ...
ROM does not install otherwise on other none AROMA ROM it works
just so you guys know ...
Dougi said:
This recovery has problem with AROMA installer ROM ...
ROM does not install otherwise on other none AROMA ROM it works
just so you guys know ...
Click to expand...
Click to collapse
Hi bro,
solved problem to flash ARHD ?
sorry for OT
ARHD flashes fine
jonata said:
Hi bro,
solved problem to flash ARHD ?
sorry for OT
Click to expand...
Click to collapse
broncogr said:
Hey guys.
Koush has been hard at work with his new recovery for The One-x.
A lot of his testing is done in our own IRC Channel #HTC-one-X on Freenode
Here is a link to his latest recovery:
http://download.clockworkmod.com/recoveries/recovery-clockwork-touch-5.8.2.4-endeavouru.img
You need to flash in fastboot by using the command fastboot flash recovery (name of recovery.img)
Also a full list of recoveries for most devices can be found at:
http://clockworkmod.com/rommanager
Issues being examined:
Cant mount USB in recovery
No charging while in recovery (It could be working but needs confirmation)
Cant flash from Rom Manager
Enjoy
EDIT 1: Next step is to enable USB support in recovery. As soon as that is done and ADB is working it will be easy to enable mount USB. Koush is on this. More testing later tonight.
EDIT 2: Problems flashing some roms flashing fails with assert failed. Looking into this later today, till then use interim recovery..
EDIT 3 : Every Rom that checks deviceid on install will fail as deviceid is wrongly stated in recovery as endeavouru rather than endevoru which is the right name. Will tell koush and we'll have a new build shortly after
Click to expand...
Click to collapse
for ur EDIT1:
the USB gadget is slightly different, i am working on fixing this... if u guys have something on ur mind ping me (via p.m.) so i can test it asap...
EDIT2/EDIT2:
u need to edit default.prop in recovery ramdisk and change the ro.board or ro.product.board or somethign like that to fix this
i was busy with recovery for Xperia S, but now that its ready i will get back to fixing this adb/usb mounting issues
Get on IRC Freenode #HTC-One-x
Koush will be in later today
I know about the deviceid
jonata said:
Hi bro,
solved problem to flash ARHD ?
sorry for OT
Click to expand...
Click to collapse
yeh yeh , i'm runngin leedroid here... AROMA and this recovery are not so friendly at the moment
Hi all.
I was trying to find out if we could get the latest CWM on our hero's, with no luck..
So i decided to build it from cyanogen and share it with everyone
Just download and flash the zip file in recovery.
DISCLAIMER: I AM NOT RESPONSIBLE FOR BRICKED DEVICES, FLASH AT YOUR OWN RISK!
The link:
http://www.mediafire.com/download.php?wbw6ewqadln2jpi
SANSYF version 5.0.2.8:
http://dl.xda-developers.com/attach...4/4/8/8/3/recovery-clockworkmod-v-5-0-2-8.zip
New properly working version 5.5.0.4! Download attatchment and flash in recovery
Hi did you use it: http://builder.clockworkmod.com/
If yes your recovery will work, yesterday I've try the site and it work
SANSYF said:
Hi did you use it: http://builder.clockworkmod.com/
If yes your recovery will work, yesterday I've try the site and it work
Click to expand...
Click to collapse
haha yeah, I just thought I'd share it with everyone
no worry, it work , there the main
I'am trying to compile TWRP from source but can't do it , missing touch libs - -'
SANSYF said:
no worry, it work , there the main
I'am trying to compile TWRP from source but can't do it , missing touch libs - -'
Click to expand...
Click to collapse
They got it working on the cdma, maybe we can port the libs to our device?
Some month ago I have compile clockworkmod recovery from my computer source and could have "power off" support and correct "partition SD card" option.
It's 5.0.2.8 version. Could you just post it in your thread with my name please ?
"They got it working on the cdma, maybe we can port the libs to our device? "
I don't think ,that was the old version 1.x of the recovery without touch.
I try to compile 2.x version :/
Clockworkmod Recovery v5.8.4.3
its working thanks so much
thank
Wow! It work! Lol. Thanks youuuuuuuuuuuuuuuuuuuu! Love it :good:
I've flashed the Clockworkmod-5.8.4.3 recovery but there's one problem : When I go into recovery, there is an error involving the ext partitions so it doesn't recognise them. Can't make a nandroid backup too because of that. Am I the only one with this problem?
Ciprilik said:
I've flashed the Clockworkmod-5.8.4.3 recovery but there's one problem : When I go into recovery, there is an error involving the ext partitions so it doesn't recognise them. Can't make a nandroid backup too because of that. Am I the only one with this problem?
Click to expand...
Click to collapse
You're not alone same here too
Ciprilik said:
I've flashed the Clockworkmod-5.8.4.3 recovery but there's one problem : When I go into recovery, there is an error involving the ext partitions so it doesn't recognise them. Can't make a nandroid backup too because of that. Am I the only one with this problem?
Click to expand...
Click to collapse
I'll see if I can fix them tonight
New fixed version is up with tweaks from the hero cdma and it has LV1.2 kernel from reimervdzee.
Download the atatchment from the first post
Enjoy!
you mean it flashes LV 1.2 when you are flashing the recovery ?
Ciprilik said:
you mean it flashes LV 1.2 when you are flashing the recovery ?
Click to expand...
Click to collapse
No, the recovery.img contains a kernel, I just replaced it with LV1.2.
Also this version supports aroma touch screen
This is just amazing!!!!
Aroma installer with touch is absolutely...impossible to describe!!
it's the first time since a while that we have a major improvement on the reco
congrats!!
lolo7291 said:
This is just amazing!!!!
Aroma installer with touch is absolutely...impossible to describe!!
it's the first time since a while that we have a major improvement on the reco
congrats!!
Click to expand...
Click to collapse
No problem
Indeed, working great...:good:
Thanks, works great indeed!
If I didn't hated so much CWM, I'll be flashing this ASAP.
Nevertheless, great work!
Intro: People with 2012 WFS reported to have no CWM visuals (i also do)
*NOTE: Even if you DID install this CM based rom wont work only stock based one*
CWM:
1. Unlock bootloader via HTCdev.com (look for guides there are plenty here)
2.Download http://www.mediafire.com/?pqtgftm40909r31 *updated*
3.Extract to C:/
4.Go to fastboot
4.Open Command prompt
5.type cd c:/WFS
6.type fastboot flash recovery recovery.img
7.wait for flashing to finish
8.Remove battery
9.Go to bootloader
10. click recovery wait for visuals
ROOTING:
*same as other methods*but..
1.move the cursor up then down until you see ( back button enabled)
2.Backup
3.Flash root.zip
Credits to fellow member pashaa for sharing recovery file
*NOTE* Dont blame me if anything happens to your device. I've Warned yah!
If you cant understand or want help post here and i'll try to help you out
ScreenShot of my recovery below
i dont get any visuals of black screen..just htc logo...and would you mind telling which cwm recovery version is this?? and will it work ony on this particular recovery?
vshl2995 said:
i dont get any visuals of black screen..just htc logo...and would you mind telling which cwm recovery version is this?? and will it work ony on this particular recovery?
Click to expand...
Click to collapse
modded 5.0.2.8
Sent from my Nexus 7 using xda premium
are youu sure you downloaded the recovery file correctly because it works for m
e??? all other recovery doesn't work except for that one
Sent from my Nexus 7 using xda premium
ngoralph said:
are youu sure you downloaded the recovery file correctly because it works for m
e??? all other recovery doesn't work except for that one
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
no i havent done this right now..i was asking because i tried to do the same procedure with official recovery some days ago..actually its my girlfriend's phone not mine and she is eating my head off because of low memory!!! anyway thanxx..ill try this asap and report back..!!
Link updated
Sorry for inconvenience
http://www.mediafire.com/?pqtgftm40909r31
WORKS
Works gr8...great job :good::good:
Confirmed, works here too. THX!
Thanks man,great job!.Finally I have visual recovery!Flashing ROMs or ZIPs allways conected to PC is not a pleasure!
sorinaugusto said:
Thanks man,great job!.Finally I have visual recovery!Flashing ROMs or ZIPs allways conected to PC is not a pleasure!
Click to expand...
Click to collapse
you can flash cm roms before?????
No,for my phone just Roms based on stock works.I have flashed and was working EQDKP roms,WildChild roms ,Superior sense rom,Kims mod rom.I have tried CM 7 and MIUI but did not work.But I am very interested to try CM roms or MIUI,so if you have any solutions for this please share with us.Thanks again.
cwm
I`m so Happy! It works on my wildfire s 2012! Thank you very, very much for your gift .
custom
ngoralph, i have one question - Can i flash a custom ROMs or kernels? or can i flash cyanogen any version (may be on stock kernel, if it`s possible?). Answer please, and thanks again!
Can i flash a custom ROMs or kernels? or can i flash cyanogen any version (may be on stock kernel, if it`s possible?).
Click to expand...
Click to collapse
I can answer this question: it is impossible. There are certain problems in work of this Mod. The first: does'nt making full nandroid backup. The second: does'nt flashing boot.img. It is necessary to develop this program still. But something, already is able: root, interface modding, ect....
Howdy.
I have flashed this recovery image and for the first time, can boot into recovery and see what I'm meant to see! Thanks. Previously (2012 hardware) I just hung on the white HTC logo screen.
Now, if I select backup and restore, press the power button, all the text disappears and I'm left with the central hat image... but nothing much happens. Pressing power again brings me back to the main menu. Same thing with -power off. The top option of reboot system now works just fine.
Any ideas? I'd like to backup my current system before flashing WildChild 3, you know - just in case anything goes wrong!
EDIT: immediate edit. cancel all of the above, I'm just new to recovery (obviously!). I went through the main menu a few times, it told me the back button was now active and away I go - backing up as we speak! Apologies!!! and thanks!
cwm
You must press one time into recovery volume + and several time volume - , while apear "back button is enable" and then such as in any cmw.
nitnit said:
You must press one time into recovery volume + and several time volume - , while apear "back button is enable" and then such as in any cmw.
Click to expand...
Click to collapse
i dont fully understand you but click volume up then down then up then downthenvolume up then down until back button enabled shows up
nitnit said:
ngoralph, i have one question - Can i flash a custom ROMs or kernels? or can i flash cyanogen any version (may be on stock kernel, if it`s possible?). Answer please, and thanks again!
Click to expand...
Click to collapse
haven't tried cm roms on stock kernel would anyone here like to try???
Uksus17 said:
I can answer this question: it is impossible. There are certain problems in work of this Mod. The first: does'nt making full nandroid backup. The second: does'nt flashing boot.img. It is necessary to develop this program still. But something, already is able: root, interface modding, ect....
Click to expand...
Click to collapse
agree with you here but i dont think anyone is willing and able to work on this recovery.
ngoralph said:
haven't tried cm roms on stock kernel would anyone here like to try???
Click to expand...
Click to collapse
i.m using now a custom kernel on my wfs2012 (overclocked 815 MGz) without trouble, but i can`t flash any CM roms because it hapens error Status7 in CWM. I think that this CWM is too old to flash CM ROMs. But we have no any choise
Dual Recovery for locked-unlocked bootloaders. TWRP 2.6.3 - CWM 6.0.3 works together!Warning 1: I am not responsible for bricked phones..
Warning 2: If you are using CM10 Locked Bootloader Version, these scripts will broke initframs. Dont use this with it.
Warning 3: If you have CWM(with chargemon hack) you may get problem. Do fresh install without recoveries...
How it works ?
-When booting your phone, BLUE led will appear.
--Volume UP enters TWRP 2.6.3
--Volume DOWN enters CWM 6.0.3
GOOD NEWS :
On CWM, external-sd mount works and also " USB MOUNT STORAGE"
How to install :
Method 1)
Dual Recovery For Ion ( Installer Script )
Link : https://docs.google.com/uc?export=download&id=0Bw6g-VrksXLESnFIeERXTUh2Nkk
Requires for "method 1" : (JB-KK)
- rooted phone
- adb debug enabled
- busybox installed
- unknown sources enabled
and start
- download installer script from above.
- unzip it into a folder.
- there are batch files for windows users and also for linux users in both the zips.
- just execute the batch files and follow the messages if any.
Method 2)
Flashable Zip (only for TWRP flash, it wont work on CWM flashing.)
Link : https://docs.google.com/uc?export=download&id=0Bw6g-VrksXLEMlIzOUlSb2ZkWk0
Method 3)
- Download Flashable Zip version (on method 2 part).
- Extract it and copy files to your sdcard.
- Manually copy files via explorers with root:
cwmrecovery.tar and recovery.tar ---to--- /system/bin (set permissions 755)
step2.sh and pre_hw_config.sh ---to--- /system/etc (set permissions 755)
-Reboot
XDA:DevDB Information
[CWM-TWRP] Xperia ION Dual Recovery for locked/unlocked bootloaders, a Tool/Utility for the Sony Xperia Ion
Contributors
Zorbeyd
Version Information
Status: Stable
Created 2014-02-03
Last Updated 2014-02-04
Thanks goes to : @letama , @djolivier , @ganeshbiyer , twrp team, cyanogenmod, fxp, @MrGezz , @DooMLoRD , crazy_doze
nice , congratz
Sent from my C6603 using XDA Premium 4 mobile app
Zorbeyd said:
Dual Recovery for locked-unlocked bootloaders. TWRP 2.6.3 - CWM 6.0.3 works together!Warning : I am not responsible for bricked phones..
How it works ?
-When booting your phone, BLUE led will appear.
--Volume UP enters TWRP 2.6.3
--Volume DOWN enters CWM 6.0.3
GOOD NEWS :
On CWM, external-sd mount works and also " USB MOUNT STORAGE"
Downloads :
Dual Recovery For Ion ( Installer Script )
Link : https://drive.google.com/uc?export=download&id=0Bw6g-VrksXLEVzAxalhCOXlQMms
Important : Installer Script works well on Linux platform, but i'm not able to test it on Windows. Need test.
Requires : (JB-KK)
- rooted phone
- adb debug enabled
- busybox installed
- unknown sources enabled
How to install :
- download installer script from above.
- unzip it into a folder.
- there are batch files for windows users and also for linux users in both the zips.
- just execute the batch files and follow the messages if any.
Flashable Zip (only for TWRP flash, it wont work on CWM flashing.)
Link : https://docs.google.com/uc?export=download&id=0Bw6g-VrksXLEMlIzOUlSb2ZkWk0
XDA:DevDB Information
[CWM-TWRP] Xperia ION Dual Recovery for locked/unlocked bootloaders, a Tool/Utility for the Sony Xperia Ion
Contributors
Zorbeyd
Version Information
Status: Stable
Created 2014-02-03
Last Updated 2014-02-02
Click to expand...
Click to collapse
@Zorbeyd the installer script is not working on windows
there is some error while running the script
but the zip file is working fine
Thanks
Installer script not working. No big deal
But flashed the Zip and i have now TWRP and CWM. :victory:
Awesome work mate.:good:
Good wrok my bro @Zorbeyd..you are the man
Sent from my LT28h using XDA Premium 4 mobile app
I don't think it is works for me.
kin912 said:
I don't think it is works for me.
Click to expand...
Click to collapse
Which method did you use dear king912?
Zorbeyd said:
Which method did you use dear king912?
Click to expand...
Click to collapse
hei,bro.I pack it to miui rom.The files are cp to /tmp when the phone boot,but the sh is not work.
---------- Post added at 09:22 PM ---------- Previous post was at 09:16 PM ----------
Zorbeyd said:
Which method did you use dear king912?
Click to expand...
Click to collapse
You should know the old method to boot recovery is hack the chargemon,but with a bug is that you can not reboot into recovery from the system.
I pm @MrGezz and he said that your recovery is work prefect.So I want to try.
If rom using chargemon hack, this wont work.
Btw there may a problem on install scripts. Flashable version works. I'm going to fix install scripts today.
Installer Script Updated (added first post) (thanks to [NUT]) :
https://docs.google.com/uc?export=download&id=0Bw6g-VrksXLESnFIeERXTUh2Nkk
Zorbeyd said:
If rom using chargemon hack, this wont work.
Btw there may a problem on install scripts. Flashable version works. I'm going to fix install scripts today.
Click to expand...
Click to collapse
I just use your files but it isn't work.I don't know the reason.
kin912 said:
I just use your files but it isn't work.I don't know the reason.
Click to expand...
Click to collapse
Please try with latest installer script. Log will help us.
Zorbeyd said:
Please try with latest installer script. Log will help us.
Click to expand...
Click to collapse
Ok,I know the reasion.It works great now.:laugh:
kin912 said:
Ok,I know the reasion.It works great now.:laugh:
Click to expand...
Click to collapse
Oh fine..
And i added 3. method for make it work..
Zorbeyd said:
Oh fine..
And i added 3. method for make it work..
Click to expand...
Click to collapse
But reboot into recovery still not work.
---------- Post added at 11:36 AM ---------- Previous post was at 11:18 AM ----------
Zorbeyd said:
Oh fine..
And i added 3. method for make it work..
Click to expand...
Click to collapse
step2.sh must set per to 755 above to work.:silly:
Dual recovery works only once, that is I am able to get to either CWM or TWRP and do backup/restore, but if I restore previously made backup, the other recovery disappears. Moreover, depending on the rom I restore, recovery is screwed, meaning either CWM or TWRP refuse to work: cannot unmount system. It probably makes sense, because previous backup comes with its own recovery.
So, I guess this works, but only on subsequent backups and restore. In other words, you can only restore backups made after installation of double recovery.
P.S. You should give credit (as opposed to just thanks) to those who helped you with this. They provided you with files and directions on how to do this.
argonom said:
Dual recovery works only once, that is I am able to get to either CWM or TWRP and do backup/restore, but if I restore previously made backup, the other recovery disappears. Moreover, depending on the rom I restore, recovery is screwed, meaning either CWM or TWRP refuse to work: cannot unmount system. It probably makes sense, because previous backup comes with its own recovery.
So, I guess this works, but only on subsequent backups and restore. In other words, you can only restore backups made after installation of double recovery.
P.S. You should give credit (as opposed to just thanks) to those who helped you with this. They provided you with files and directions on how to do this.
Click to expand...
Click to collapse
A lot of people have locked bootloader here. So recoveries/scriptes must be based on ROM directories. If you use your old ROM backups this will gone. That is as natural as breathing.
and read second post for credits.
Zorbeyd said:
A lot of people have locked bootloader here. So recoveries/scriptes must be based on ROM directories. If you use your old ROM backups this will gone. That is as natural as breathing.
and read second post for credits.
Click to expand...
Click to collapse
That's right. But what is the point of having dual recovery? So that people can restore backups of prior roms made with CWM, but they can't do it, because dual recovery will be erased on restore. People with locked bootloaders can use CWM fine, but not TWRP. You should probably rewrite the script to have just TWRP. This way those with locked bootloaders can have it too. You don't really need dual recovery...
Good job, anyway...
argonom said:
That's right. But what is the point of having dual recovery? So that people can restore backups of prior roms made with CWM, but they can't do it, because dual recovery will be erased on restore. People with locked bootloaders can use CWM fine, but not TWRP. You should probably rewrite the script to have just TWRP. This way those with locked bootloaders can have it too. You don't really need dual recovery...
Good job, anyway...
Click to expand...
Click to collapse
Do your backups with dual recovery, you wont lost dual recovery.
This is simple like that.
Unofficial TWRP 3.2.0-0 Mi Note 2 (scorpio)
Unofficial TWRP build for the Mi Note 2.
TWRP 3.1.1-0 Changelog https://twrp.me/site/update/2017/05/19/twrp-3.1.1-0-released.html
Compatible with TWRP Backup and Recuse Tool for PC
Download Link
twrp-3.2.0-0-scorpio.img
Update 14/07/17
Update TWRP to 3.2.0.0
Update 14/07/17
Update TWRP to 3.1.1-0
New streamlined kernel
Add F2FS support
Improved Android 7.0 Miui compatibility - If issues persist please let me know
Update 30/05/17
All features working as expected
Screenbrightness adjustment is now responding accurately with a suitable default brightness
Updated kernel.
Much quicker booting.
Installation Guide
Once you've got you're bootloader unlocked with MiFlash and run through all the Xiaomi hoops to unlock your bootloader and have a fastboot installed on your PC:
Simply place the download where you like and then open a command prompt and type
fastboot flash recovery /path/to/twrp-3.1.1-0-scorpio.img
BONUS THEMES & File Manager
Plus as a special treat I'm including a full guide below to use Materialised Theme and Aroma File Manager both working within TWRP 3.1.1-0
Themes available from here
1. Install the latest TWRP linked above.
2. Download one of the themes above (see screenshots below for recommendations)
3. Download Aroma File Manager for TWRP from here
4. Once booted into TWRP select Install and choose the theme.zip you've downloaded.
5. You will instantly see the theme applied
6. Click Install again and this time select "materialised_aromafm_200-b7.zip"
7. Once that zip has completed installing open the Materialised Options (the art palette icon on the top right)
8. Tick the box that says "Use Aroma File Manager"
9. Press back and select "File Manager" from the list.
10. Swipe to start Aroma File Manager
11. Enjoy!!
See attached thumbnails for themes in action.
Source:
https://github.com/stonetrapping/twrp_android_device_scorpio
Special thanks to:
z31s1g for the wonderful themes and the Aroma File Manager
Thanks, dude !
Working OK for both MIUI and AOSP based ROMs?
Working with ASAP and MIUI and encryption all round.
That's great! Thanks for sharing
After flashing this recovery, it boots right back into stock recovery. Any idea what i'm doing wrong? Do I have to disable dm-verity or something?
stephendt0 said:
After flashing this recovery, it boots right back into stock recovery. Any idea what i'm doing wrong? Do I have to disable dm-verity or something?
Click to expand...
Click to collapse
You can keep dm-verity. After flashing I'd suggest leaving fastboot and booting straight into recovery via fingerpress.
Flashing SuperSU or Magisk or similar should ensure survival of TWRP if it's being overwritten.
Works great but I found :
1. Reboot to TWRP is so slowly... Why ?
2. System won't boot into TWRP when wipe everything and reboot to TWRP. I need to turn phone off and then press volume up + power button to enter TWRP again.
Is there any chance to fix those ?
Kris Chen said:
Works great but I found :
1. Reboot to TWRP is so slowly... Why ?
2. System won't boot into TWRP when wipe everything and reboot to TWRP. I need to turn phone off and then press volume up + power button to enter TWRP again.
Is there any chance to fix those ?
Click to expand...
Click to collapse
1. I've noticed the slow speed too, I'm 100% sure why it's happening but I have some ideas.
2. The same ideas will hopefully address this issue.
It was a quick and dirty port since there was no native TWRP, I haven't had the time yet to improve it but I'll build an updated release based on 8.2.5.0 sometime soon and look to making it official.
Kris Chen said:
Works great but I found :
1. Reboot to TWRP is so slowly... Why ?
2. System won't boot into TWRP when wipe everything and reboot to TWRP. I need to turn phone off and then press volume up + power button to enter TWRP again.
Is there any chance to fix those ?
Click to expand...
Click to collapse
Lastest TWRP build
https://mega.nz/#!NBwyjKrK!XELWAAwehtKnXgXOge_y16kEP0Uqscv_5LVx-YqTzcc
Boots quicker. Screen brightness is fully adjustable. Reboot to recovery from TWRP is working
Has been submitted to TeamWin for official status but for now remains unofficial.
Please let me know your thoughts.
Thanks, StoneTrapper !!
I will check later after flashing new version !
StoneTrapper said:
Lastest TWRP build
https://mega.nz/#!NBwyjKrK!XELWAAwehtKnXgXOge_y16kEP0Uqscv_5LVx-YqTzcc
Boots quicker. Screen brightness is fully adjustable. Reboot to recovery from TWRP is working
Has been submitted to TeamWin for official status but for now remains unofficial.
Please let me know your thoughts.
Click to expand...
Click to collapse
Really fast at boot, maybe because is a release from the future (30052017 )
great job, thanks man!
Can not use usb otg function ...
Can not use usb otg function ...
Otg function, no work
[email protected] said:
Can not use usb otg function ...
Otg function, no work
Click to expand...
Click to collapse
I've had no issues with USB-OTB, with any standard formatted flash drive (FAT32, NTFS, EXT4).
This is also the first I've heard of anyone having such an issue.
Does the OTG drive mount successfully in whatever ROM you're using? Is it attached prior to booting to TWRP? Can you provide additional information.
TWRP doesn't like remounting the same USB multiple times - i.e if you unplug the USB while in TWRP, and then reattach the same drive it won't remount it.
Sorry to feedback lately because I was too busy in past 2-week.
Well, new TWRP is working well.
The only one problem: If I want to upgrade firmware, TWRP will be replaced by MIUI stock recovery after flashing new version of MIUI ROM.
It's pretty annoying because I need to get into fastboot mode then flash TWRP. After that, entering TWRP and flash lineage OS ...
Is it possible to be fixed in next coming version ?
Kris
May I know how to flash the TWRP rom?
I'm on MIUI.eu ROM, can I flash full global MIUI original ROM with TWRP without bricking the phone ??
Before on Redmi note 3 u can't flash original ROM without bricking the phone, u needed special TWRP (zxc version) or modify the ROM
Can you explain me ?
Envoyé de mon Mi Note 2 en utilisant Tapatalk
Link down.
chemha said:
Link down.
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=673368273298968884
Will op fixed shortly.
StoneTrapper said:
https://www.androidfilehost.com/?fid=673368273298968884
Will op fixed shortly.
Click to expand...
Click to collapse
It does not work. No download link found