Hi everyone! New here and must say I have really enjoyed learning about the whole root process.
Not rooted as of yet, but my question is a time sensitive one!
I have the e980 model from att. A wired connection to tv is a must feature for me.
I was informed by a rep it could do it by mhl cord and found it not true.
I found info about mydp, slimport, displayport functionality.
LG customer service was unable to verify compatibility,
I am hoping someone here can confirm for me this tech works with e980.
Fingers crossed it does, Monday is the last day of my return window.
I love this phone and truly hope I don't have to go that route!
Yes you are right SlimPort is what you need for the E980 the MHL one I think works on some of the Euro ones. I am getting one in the next few day and can report back. But to help you out go to this link http://www.slimportconnect.com/ they have a link to the Amazon one that is 29.95 so don't pay over that. I seen a few places showing it for 129.99. Hope this helps....
Thanks a LOT! I just found another thread regarding my question, don't know how I didn'tfind it in my searches... ordered from the company link you provided through Amazon. Can't wait!
I must say after reading about the differences in mhl and display port, I am very glad my phone is one of the very few to support it.
Related
When I had a Vibrant, the jig helped me out of a few jams. Not too long ago, I got the Galaxy S2 as a replacement, so when I started playing around with it, I wanted to make sure I had one close by just in case. The jig is a tiny little thing and I'm prone to losing things, so it was long gone by the time I looked for it again. I decided I'd go cheap and ordered one from an eBay seller in China... that was a mistake. It was definitely cheap, but it didn't do a thing when I plugged it in. It wouldn't turn the phone on and it wouldn't put it into download mode. No sense in returning it either since the return shipping would cost more than I'd get back.
I still wanted to get a working jig and as luck would have it, I found a US based seller when I was looking around for a Kindle Fire factory cable. It turns out that he hand crafts these himself and XDA members give him overwhelmingly positive reviews for his products and service. I sent off a PM and he wrote me back in a flash, I put in my order and had it in 2 days! It's nicely built with a lanyard cord on it so I'm less likely to lose it and most importantly... it works!
I've attached some pictures here with the SkOrPn jig, the Chinese jig (the one without the cord that doesn't work), and my Galaxy S2 with the SkOrPn jig in download mode. It might cost a little more than the cheapest jig that you can find on eBay, but I'm happy to pay a little more for a quality product from a guy who takes pride in the things he makes. FWIW, I'm not affiliated in any way to this seller... I'm just a satisfied customer. He doesn't go out of his way to solicit sales of his products, so I just wanted to get the word out there for anybody that might be looking to purchase a jig for their phone.
http://www.ebay.com/itm/230634690605
http://forum.xda-developers.com/member.php?u=500006
Almost forgot... I've exchanged a number of PMs with him this past week and inquired about getting a USB OTG cable adapter. He said that while he doesn't currently make them, he'd certainly consider it if enough people showed some interest. Personally, I think a USB OTG cable is at the top of the list of must-have accessories for this phone, so let him know if you agree with me!
Does this one reset the counter on when booting into download mode?
I have ordered cheaper ones from china that do the job just fine.
Kid Poker said:
Does this one reset the counter on when booting into download mode?
Click to expand...
Click to collapse
The short answer is I do not know. I did flash an OS through ODIN at one point, but never looked at the download count to see if it had even incremented. That phone went back to T-Mobile for display issues before I got a working jig and I've only flashed a recovery with ODIN after that. There appears to be some mixed opinions on whether any jig will reset the counter, but I doubt that one jig would reset it while another would not. YMMV.
KillaHurtz said:
I have ordered cheaper ones from china that do the job just fine.
Click to expand...
Click to collapse
I'm glad that worked out for you. In my OP, I was just sharing my experience of ordering a cheap one from China that failed to do anything and then purchasing one from SkOrPn that worked as advertised. FWIW, I'm happy with my SkOrPn purchase even though I paid a bit more. Ultimately, I was glad to provide a small amount of support to a fellow XDA member and getting a quality product in return. To each his own.
I would love to support another member but you might want to have him update his ebay postings. As of now it does not list the jig working for the SG2. If he updates that then I would place an order.
XPerties said:
I would love to support another member but you might want to have him update his ebay postings. As of now it does not list the jig working for the SG2. If he updates that then I would place an order.
Click to expand...
Click to collapse
I don't work for the guy, so it's not my job or place for me to tell him to update his listing, but I did send him a PM to have a look at your post. With that said, he states in his ebay listing...
The "SkOrPn JIG" is compatible with all known Galaxy S class phones, including the following:
So, that list is not an exclusive compatibility list... it's an "including, but not limited to" list. There's no difference in jig specs for the different models. If it works in those phones, it will work in the SGH-T989. I've also posted a picture in my OP with the jig in my phone.
kinfauns said:
I don't work for the guy, so it's not my job or place for me to tell him to update his listing, but I did send him a PM to have a look at your post. With that said, he states in his ebay listing...
The "SkOrPn JIG" is compatible with all known Galaxy S class phones, including the following:
So, that list is not an exclusive compatibility list... it's an "including, but not limited to" list. There's no difference in jig specs for the different models. If it works in those phones, it will work in the SGH-T989. I've also posted a picture in my OP with the jig in my phone.
Click to expand...
Click to collapse
Yes I understand it's not your job. I was only suggesting you let him know since you have started this thread in an effort to spread a kind word and support a member.
Also in the event I had ordered a jib from his ebay listing and it did not work I wouldn't have a leg to stand on regarding a refund because the model is not listed but I do understand what you are saying. In closing I'll kindly bow out of the thread since your reply seemed kinda aggressive.
Have a wonderful day.
XPerties said:
Yes I understand it's not your job. I was only suggesting you let him know since you have started this thread in an effort to spread a kind word and support a member.
Also in the event I had ordered a jib from his ebay listing and it did not work I wouldn't have a leg to stand on regarding a refund because the model is not listed but I do understand what you are saying. In closing I'll kindly bow out of the thread since your reply seemed kinda aggressive.
Have a wonderful day.
Click to expand...
Click to collapse
Well, it wasn't meant to be an "aggressive" post, so I'm sorry if you took it that way. By no means was I yelling and there certainly wasn't any spittle flying at my monitor as I typed my reply.
I was just trying to make things clear and I also understand why you'd want some assurances. Personally, it didn't even occur to me to make sure this particular phone was in that list before I ordered. If you have reservations about it, I suggest you send him PM. I'm sure he'll vouch for his product and tell you that it will work in this phone. Good luck!
I just bought one.
XPerties said:
I would love to support another member but you might want to have him update his ebay postings. As of now it does not list the jig working for the SG2. If he updates that then I would place an order.
Click to expand...
Click to collapse
It is already listed in the eBay ad for SGSII. I have sold over 1900 of these to xda members, teamwhiskey members, edt members and via word of mouth in multiple IRC channel's since 2010 and to date it has not failed on any samsung phone, the only failures have been phones with corrupted bootloaders a.k.a hard bricks. Also you said SG2 and I'm not aware if any SG2 devices so I can't list that device. All Samsung Galaxy S and SII series smartphones use the same resistance value for Download Mode as far as I know including the latest Google Nexus.
Thanks to the OP for getting the word out on my premium high quality Download Mode JIGs. There is NO OTHER JIG made as good as this one PERIOD
SkOrPn
Sent from my SGH-T959 using XDA App
SkOrPn said:
Also you said SG2 and I'm not aware if any SG2 devices so I can't list that device. All Samsung Galaxy S and SII series smartphones use the same resistance value for Download Mode as far as I know including the latest Google Nexus.
Click to expand...
Click to collapse
rofl....ok sorry forgot a S in the SGSII. BTW your ad does not list "Samsung Galaxy S 2 T989" but it's A-OK. I just placed an order on ebay.
Thanks.
XPerties said:
rofl....ok sorry forgot a S in the SGSII. BTW your ad does not list "Samsung Galaxy S 2 T989" but it's A-OK. I just placed an order on ebay.
Thanks.
Click to expand...
Click to collapse
Oh Ok that t989 is just a T-Mobile part number but its still based off the original i9100 SII series. I will remove the i9100 from the listing when I get the chance. I will look to see if my compatibilty list is up to date. Thanks
Thanks for the order, yours will go out today.
SkOrPn
Sent from my SGH-T959 using XDA App
Thanks for clearing all that up, SkOrPn. Again, my apologies to XPerties if I came off the wrong way.
kinfauns said:
Thanks for clearing all that up, SkOrPn. Again, my apologies to XPerties if I came off the wrong way.
Click to expand...
Click to collapse
thanks for bring it here... i have ordered one..
kinfauns said:
Thanks for clearing all that up, SkOrPn. Again, my apologies to XPerties if I came off the wrong way.
Click to expand...
Click to collapse
No worries, it's all good.
Sent a thanks hit your way.
It has come to my attention that some devices do and some don't have the Counter Reset feature. It is up to the purchaser to know if their phone works or not with that feature as I only guarantee Download Mode. Apparently the i727 or T727 (lol not sure which it is now) does not have that feature yet it is based on the SGS2 internals.
What is even more disturbing is I can not find any information that suggests the T989 works with even download mode. I found this Q&A that seems to suggest that Download Mode works but Counter resetting does not. However again, lol, I am sure I have had customers with a TMO t989 purchase my JIG and they were happy as can be, so Im not sure if they ever tried the counter reset thingy. And my tester Alexea sold her SGS2 to get the Gnex.
Please if anyone can let me know for sure one way or the other I would appreciate it... I get emails all the time asking me about the SGS2 phones and the Custom Binary Counter reset feature and that feature is not present on my T959 test phone.
EDIT: kinfauns says his T989 definitely goes into Download Mode, but he does not know if it works with the counter reset feature of the device. Also, all my ebay listings have been updated to include the T989 and many other devices.
You should offer local pick up in Albuquerque and I would buy from you.
Sent from my SGH-T989 using XDA Premium App
Needed a jig (you never know when you'll need it) and the lanyard is a pretty cool feature. Also, I didn't trust the ones from China. Just couldn't bring myself to order something that was such an unknown (no matter the low cost).
Just ordered a Skorpn. Thanks go out to the OP and SkOrPn!
StickyK3ys said:
Needed a jig (you never know when you'll need it) and the lanyard is a pretty cool feature. Also, I didn't trust the ones from China. Just couldn't bring myself to order something that was such an unknown (no matter the low cost).
Just ordered a Skorpn. Thanks go out to the OP and SkOrPn!
Click to expand...
Click to collapse
The Chinese ones are not much different, in fact its the same exact connector and the only difference is the Chinese jigs are not tested to make sure the pins in question make contact, and so there is about a 15% failure rate, or even higher maybe. Someone like myself test each port before I even solder the resistor onto it, so I can weed out the bad apples and throw them away. They also do not test it on an actual phone to make sure it goes into download mode, and I do
Hence why they are so extremely cheap.
So is this jig for when the key combination doesn't work?
http://www.amazon.com/Menotek-Adapt..._1?ie=UTF8&qid=1341241725&sr=8-1&keywords=mhl
I need an MHL adapter ASAP. Does anyone have any experience with this MHL adapter?
Thanks!
EDIT:
What about this one! http://www.amazon.com/Skiva-Adapter...F8&qid=1341247731&sr=8-5&keywords=mhl+adapter
I have that one. It's worked with both a LG G2X and a Samsung Galaxy Note. I think most devices need to be hooked up in sequence for it to work properly (charger first then HDMI, or vice versa).
Edit: Oops, I meant Samsung Galaxy Skyrocket, not LG G2X (that one had its own HDMI out). Too many devices last year...
The reviews from people owning the Galaxy Nexus state that it has awful performance.
burhanistan said:
I have that one. It's worked with both a LG G2X and a Samsung Galaxy Note. I think most devices need to be hooked up in sequence for it to work properly (charger first then HDMI, or vice versa).
Edit: Oops, I meant Samsung Galaxy Skyrocket, not LG G2X (that one had its own HDMI out). Too many devices last year...
Click to expand...
Click to collapse
Do you experience any choppiness or anything of that sort?
akira02rex said:
The reviews from people owning the Galaxy Nexus state that it has awful performance.
Click to expand...
Click to collapse
I just noticed the extra reviews. I need one for vacation, and this was one of the top ones on Amazon. If this doesn't work, I can always return it. That's not a problem. I just really need one.
Do you have any recommendations for MHL adapters on Amazon?
What about the other one in my OP?
I have the Skiva one. Works well. I PM'd you about it.
If you need one "ASAP" why not just run down to the TMobile store and pick one up.
I just bought one off of monoprice, 9 dollars. I'm sure by reviews it will work fine and monoprice has never failed me.
hypersonicx said:
If you need one "ASAP" why not just run down to the TMobile store and pick one up.
Click to expand...
Click to collapse
I don't have a TMobile store near me at all, and plus, I'd like to not pay out me butt cheeks. I need one by tomorrow and I figured I could use Amazon and get it for cheap with one day shipping with my Prime account.
systemlayers said:
I just bought one off of monoprice, 9 dollars. I'm sure by reviews it will work fine and monoprice has never failed me.
Click to expand...
Click to collapse
That's too expensive when I toss in shipping. I would definitely have checked them out if I would have thought about this sooner. Sadly, I just thought about it last night, but I was busy with work.
I ordered this MHL cable that specifically says it's made just for S3 12 days ago but hasn't turned up, so I emailed the seller asking why it hasn't turned up yet and got this reply:
we have just realised these cables are not compatible with the s3,
would you like to wait till the correct cable comes in or shall we refund
your money\?
kind regards
sunny savers.
And they didn't even try to explain why I didnt receive it even though I got email delivery confirmation 12 days ago.
http://www.amazon.co.uk/Adapter-GT-...7TNA/ref=sr_1_2?ie=UTF8&qid=1341253133&sr=8-2
Thanks for warning users.
Personally, I don't think it is that vendors fault. Samsung said that the SGS3 had MHL. There have been more then 100 devices with MHL so far and they have all been compatible with each other.
There was no way for the vendor of that MHL cable (or anyone else) to know that the SGS3's MHL port is not really an MHL port.
See here for more:
http://www.galaxymhl.com/
Tomaxda said:
Thanks for warning users.
Personally, I don't think it is that vendors fault. Samsung said that the SGS3 had MHL. There have been more then 100 devices with MHL so far and they have all been compatible with each other.
There was no way for the vendor of that MHL cable (or anyone else) to know that the SGS3's MHL port is not really an MHL port.
See here for more:
http://www.galaxymhl.com/
Click to expand...
Click to collapse
Yeah but it looks like the seller knew that before I even put the order in yet still took payment and confirmed delivery, because after 11 days I asked them to confirm it had been sent and they just said they found out it isn't compatible and it wasn't until I emailed them that they informed me of this, and you know maybe it just got lost in the post but I really think it's more than that.
I thought about posing this question in the Q&A section but since it is an accessory I thought I’d list it here. Has anyone heard of a planned release date for the Allshare Cast dongle? I saw Amazon is taking orders at $100 saying it “usually ships within 1-2 months” but that’s not exactly precise.
badbeat33 said:
I thought about posing this question in the Q&A section but since it is an accessory I thought I’d list it here. Has anyone heard of a planned release date for the Allshare Cast dongle? I saw Amazon is taking orders at $100 saying it “usually ships within 1-2 months” but that’s not exactly precise.
Click to expand...
Click to collapse
Did you ever find out your answer? I need to buy on of these asap. I saw it on amazon too and it says 1-3 months now. Are they not available in the USA yet? Also I called the Official Samsung Accessories department today and the guy was very helpful, but had NEVER heard of this device. Seriously, I sent him a few links of the device on Amazon and the Review of the device off Engadget. He called me back to let me know, no one there had ever heard of it either.....Weird!
It's available in Poland
From all I've heard it should be last week of August in UK, and I just don't get why we get the high end phones released and announced first over here because we are one of the biggest markets, but Samsung always give us the accessories last and not bother with any firm release dates, I mean a lot of people are already pissed off with lack of Mass storage mode and External App moving so you'd think they'd have enough sense to get the accessories out as quick as possible to divert attention away from everything else they messed up.
Michael_P said:
From all I've heard it should be last week of August in UK, and I just don't get why we get the high end phones released and announced first over here because we are one of the biggest markets, but Samsung always give us the accessories last and not bother with any firm release dates, I mean a lot of people are already pissed off with lack of Mass storage mode and External App moving so you'd think they'd have enough sense to get the accessories out as quick as possible to divert attention away from everything else they messed up.
Click to expand...
Click to collapse
Yeah I know what you mean... I mean stupid HTC has there Media Link out already. It does practically the same thing, but from what I have seen, it isnt quite as good. I wonder if it is even compatible with with other android devices. I want the Allshare Dongle because as a teacher I want to use its presentation mode for power point.
Hey guys, one more thing, I also Have a Nexus 7, you think I could install Allshare on the Tab an use the dongle with the tab as well? That would be ideal!
Allshare funcion uses wireless lan (router) to stream only videos, photos and music.
Allshare cast dongle uses Wi-Fi Direct technology to create mirror of the phone on the TV screen (you can also play games). You don't have to be in the area with wi-fi network.
Allshare cast dongle only works with Galaxy S3.
darkkain said:
Allshare cast dongle only works with Galaxy S3.
Click to expand...
Click to collapse
And from the box - Galaxy Note 10.1
socjdqcer said:
Did you ever find out your answer? I need to buy on of these asap. I saw it on amazon too and it says 1-3 months now. Are they not available in the USA yet? Also I called the Official Samsung Accessories department today and the guy was very helpful, but had NEVER heard of this device. Seriously, I sent him a few links of the device on Amazon and the Review of the device off Engadget. He called me back to let me know, no one there had ever heard of it either.....Weird!
Click to expand...
Click to collapse
Sorry I never responded back. I didn't get any replies for a while so I assumed this thread was dead. Hopefully it's available soon!
badbeat33 said:
Sorry I never responded back. I didn't get any replies for a while so I assumed this thread was dead. Hopefully it's available soon!
Click to expand...
Click to collapse
Here in sweden we have had it for about 2weeks now and my two cents in the matter is,,,,as of now the dongle doesn't work very well ,,
No 1080p , problems with connection, picture in picture (popup play) doesn't work,
Overall iam kind of disappointed
Hopefully a fw upgrade will correct some or all of the problems
Skickat från min ASUS Transformer Pad TF300TG via Tapatalk 2
has anybody with proper cables tried hooking up the gnote2/smartdock to a motorola lapdock? that would be friggin' awesome if the lapdock completely works with a hdmi cable and the keyboard/trackpad if functional with a usb from the smartdock. i really have no interest in the smartdock as i have mhl already so the smartdock would be redundant for me in the few situations i use mhl but if it works with the lapdock then a whole bunch of possibilities arise and my laptop would probably never ever leave the house.
so anybody know, tried, working on it, interested etc.? i was planning on selling my atrix/lapdock soon but seeing i need to order a couple things from samsung this week i am thinking of trying it. the thing is though, the smartdock has been unavailable on their website and $100 is too expensive for me to just experiment for hahas. if it becomes available and i can snatch it for $50 with a half off coupon then i will order the other cables necessary to try.
I would be interested in this as well. There is another new thread asking about it (though yours in newer).
http://forum.xda-developers.com/showthread.php?t=2084881
terra_droid said:
I would be interested in this as well. There is another new thread asking about it (though yours in newer).
http://forum.xda-developers.com/showthread.php?t=2084881
Click to expand...
Click to collapse
Thanks. Didn't see that. Problem is finding a smart dock now. Amazon has no stock. There are 2 on eBay at let me empty your bank account prices. Samsung has no indication if and when these will be back in stock. So now the question remains... anybody want to sell their smart dock for a reasonable price so I can test this?
Sent from my GT-N7100
Supposedly the dock will be back in stock mid February. It is likely amazon will have it a few days before Samsung's website has it though. Don't ask me why.
Sent from my GT-N7100