I have a plantronics BT headset with an SPV M500, i have settled with the idea that i am not going to get voice dialing but, is it possible to map the button on the headset to start voice dialing on the handset? I have read a lot about it and there seem to be lots of conflicting ideas.
Also, Pocketmac on the mac when syncing email with the email app, it just flashes on the screen and does not sync, when i try with entourage it flashes repeatedly and has to be force quit.
Anyone else had this problem??
Thanks
J
Greetings,
I am trying to activate the voice dialing using the original stereo headset that came with the device, by clicking on the button, but nothing happens! Is there anything I should to?? I have tested the headset by calling myself and it's working fine apart from voice dialing activation.
Thanks.
I have a dutch ROM. I cannot find how to record voice dialing commands, moreover, the manual does not mention anyting about it.
What's up??
Voice dialling
There is no voice dialling option on the UK spec version either, I've tried MS Voice Command v1.6 and that doesnt work at all either, anyone got any ideas?
It works. Voice Command gets to the one hardware button assigned that's configurable. Just hold the Call button until u hear a beep.
I disabled Voice Command though due to the ringtone volume bug. Every 2 seconds the ringtone gets low for an announcement that you don't hear. Still waiting for a proper fix without all the work of replacing files.
I was looking for the original voice dialing function. But it really isn't there on the TP2. Voice Command is much better though. But damn that bug.
Another problem is that I use it on my bikehelmet when driving. But on the TP2 you need to hold the call button 3 secs (using Voice Command). That turns my bluetooth communication system off. xD
On my previous phone Xperia X1 I could assign a button without needing to hold it for 3 seconds. That worked for my bikesystem.
Google voice2go
Cyberon Voice speed dial is the best for the job but didnt try it yet. Dunno compatible with broadcom/widcomm stack if using btooth hfree. anybody tried it ?
I try Cyberon Voice speed dial, it seem to work well on mic of phone . but it don't work by BT activate, I think BT stack not support. Any one can solve this?
tornado said:
I try Cyberon Voice speed dial, it seem to work well on mic of phone . but it don't work by BT activate, I think BT stack not support. Any one can solve this?
Click to expand...
Click to collapse
Can you post a download link for this software? Thanks
Pimmr said:
Can you post a download link for this software? Thanks
Click to expand...
Click to collapse
see link in http://forum.xda-developers.com/showthread.php?t=523114
MS Voice Command works gr8 at least when i talk to my phone english
you have to buy the voice command software...
terryd1980 said:
There is no voice dialling option on the UK spec version either, I've tried MS Voice Command v1.6 and that doesnt work at all either, anyone got any ideas?
Click to expand...
Click to collapse
you have to buy the voice command software from Microsoft, its about $39.00. None of the foreign phones came with bluetooth voice command software...
Yes MS voice command works like a charm on TP2
Not through Bluetooth it doesnt, thats the main point of voice dialing, I cant fiddle with my phone whilst driving as thats illegal, voice dialing through bluetooth was a breeze with Voice Command v1.6 on the old Kaiser, I need to find out how to get that functionality again.
The Telus version of the Touch Pro2 comes with Voice Command 1.6.21052 in ROM
terryd1980 said:
Not through Bluetooth it doesnt, thats the main point of voice dialing, I cant fiddle with my phone whilst driving as thats illegal, voice dialing through bluetooth was a breeze with Voice Command v1.6 on the old Kaiser, I need to find out how to get that functionality again.
Click to expand...
Click to collapse
after reading your post sent a question to HTC...cut a long story short they tested MVC on a TP2 and through the BT headset succesfully activated a command... when i first contacted they sent the following cab and suggested i install ... so this may help
CVC-PPC-WWE-711091-hTCPPC (Aus Voice Commander).CAB
did not buy because of this post but according to HTC the profile does work on TP2 so back on final list after my 1st choice the B7610 is pushed back to Oct launch
Due to speaking to HTC support who said they had voice over BT headset working on TP2 brought one and low and behold it does not work ... not happy
Nice to know.
I googled CVC-PPC-WWE-711091-hTCPPC (Aus Voice Commander).CAB got redirected to the HTC site.
http://www.htc.com/au/SupportDownload.aspx?p_id=71&cat=3&dl_id=277
Guess what. Not available for my TP2.
ChriX84 said:
Nice to know.
I googled CVC-PPC-WWE-711091-hTCPPC (Aus Voice Commander).CAB got redirected to the HTC site.
http://www.htc.com/au/SupportDownload.aspx?p_id=71&cat=3&dl_id=277
Guess what. Not available for my TP2.
Click to expand...
Click to collapse
So that's it, there is no voice dialing via bluetooth?
I've got the same issue with this phone, I could not activate voice dialer to listen me by pressing button on handsfree.
Is there anyone who can fix it????
hecksk said:
So that's it, there is no voice dialing via bluetooth?
I've got the same issue with this phone, I could not activate voice dialer to listen me by pressing button on handsfree.
Is there anyone who can fix it????
Click to expand...
Click to collapse
I emailed in detail about this problem. Mentioning that Voice Command only works on the phone itself by holding the call button for 3 secs. When using the bt handsfree set the handsfree set turns off when holding the button for 3 secs on it. While it works perfectly on my old Xperia X1 (wich is made by HTC too). With 3 different bt sets. No holding buttons for 3 sec. But only by shortly pressing the button.
Hopefully they answer with good news.
guys, I have an idea: what if we use AEB button plus to map voice command to one of the vol key-long press or double press for example, and then we see if the BT headset is capable of invoking it using its own volume keys? dunno if it's clear enough...
you might try it, so no long press on power button of the headset or so...
the other problem: even if my strange idea would work, I dunno if then the TP2 / voice command would listen to my commands through the BT headset.. but it might be worth a try
this absence of voice dialing and all this problems are driving me mad
cheers!
Can someone confirm if MS Voice (UK) works on the TP2?
When I installed this on my Diamond, it f***ed up the phone and required a hard reset .... twice! Once I thought it was my fault, but I did it again to make sure, and no it was the phone!
It worked great on my previous phone, but I've just got this one the way I like it, and would not like to have to reset everything
I have the TMoUS TP2 that came with MSVC preinstalled and it works perfectly with my Motorola S9 headset via BT.
Maybe try to get the version in the TMo ROM?
S
After getting my US TMo TP2 last month I've been pretty sure everything Bt was working properly.
Giving commands is 100%, I can touch the call button on my Moto S9's and say Dial <contact>, or Dial <555-1212> or What are my appointments tommorrow?, etc. and it works great.
I thought notifications were working as well. Calender appt. announced via my S9's and the text to speech was impressive as it read them out to me but something was missing and I just realized what it was. Incoming phone calls were not being announced properly. I did hear it ring and I could press the headset button and take the call just fine but it was the default S9 ring not my ringtone and I did not hear VC announce the number or contact. I was having to look at the phone to see who was calling.
So I went searching XDA and found this post that has just about everything you need to know about MS VC. After reading thru it thoroughly and trying many of the settings and reg tweaks I found out how to make VC announce incoming calls but it will only do so thru the device speaker an not thru Bt Handsfree. I've tried everything in that post that might help but to no avail.
Any one here have any idea?
S
Microsoft are working on it apparently.
I think I know the answer to this but I'll ask anyway:
Does Bluetooth voice dialling work on any AOSP ROMs? I can hear people when in a call through my visor speaker in the car but if I try to use it for dialling a contact by pressing the button the voice search app loads but doesn't hear what I say.
And if it doesn't work with AOSP on the Note 2 does it work with other mobiles or is it an Android issue? It used to work fairly well with SVoice and Samsung ROMs.