My note II had maks rom all star 5.0 and i've used his whompasaurus as well. I can install AOSP roms just fine, but i can not install roms such as lab rats newest 9/6. I did the all in one odin exe push to mc2 and installed the modem. After flashing lab rats in cwm or twrp i just get stuck on the samsung galaxy note II screen and never boots. What am i missing?
Are you wiping your device between ROMs, and if so how thoroughly?
You should be wiping /system, /data, and cache and dalvik cache.
I am doing complete wipes, the thing is like lab rats.. it basically just sites at the galaxy note screen for hours.. I'm wondering if it has to do with me upgrading to a new modem/firmware. Maybe i didn't go from ljc to mc2 or whatnot correctly.. all i know is next to none of the roms outside of aosp will boot
Fixed, apparently i have to load some roms off the internal sd card... no idea why, but thank god
i have the exact opposite problem. I can run most TW roms, but if i run any CM 10.2 i hang on boot screen no matter how well i wipe the memory.
I would just go back to CM10.1, but MMS won't work on any 10.1 ROM
Related
After trying to flash a new rom after being on AOKP M1 for a little while (http://forum.xda-developers.com/showthread.php?t=1875923) the phone got stuck at the Black and white Samsung Galaxy SIII screen and didn't boot upon hitting reboot system now on cwm. Tried again, tried reflashing and the whole 9 yards wouldn't boot at all. So I turned to odin and went to the prerooted latest JB build (http://forum.xda-developers.com/showthread.php?t=1949687) and then reflashed touch cwm and tried to reflash the rom. Same problem. So, I odin'd back to the non rooted UVDLJA. Rerooted and reflashed cwm and blahblahblah. I said hmm maybe it's the rom, I then tried to flash this rom (http://forum.xda-developers.com/showthread.php?t=1993934) and when I tried to reboot system now after the process; again the phone got stuck at the black and white Samsung Galaxy SIII screen and did not boot. The phone works fine when I odin it to stock builds but refuses to boot custom roms. Can someone help me here? I haven't been able to find a solution for days. :crying:
PS I'm a noob, don't kill me lol
edit: forgot to include I have the Tmobile variant
Did you wipe data and cache when you flashed the new rom?
nyyankees1237 said:
After trying to flash a new rom after being on AOKP M1 for a little while (http://forum.xda-developers.com/showthread.php?t=1875923) the phone got stuck at the Black and white Samsung Galaxy SIII screen and didn't boot upon hitting reboot system now on cwm. Tried again, tried reflashing and the whole 9 yards wouldn't boot at all. So I turned to odin and went to the prerooted latest JB build (http://forum.xda-developers.com/showthread.php?t=1949687) and then reflashed touch cwm and tried to reflash the rom. Same problem. So, I odin'd back to the non rooted UVDLJA. Rerooted and reflashed cwm and blahblahblah. I said hmm maybe it's the rom, I then tried to flash this rom (http://forum.xda-developers.com/showthread.php?t=1993934) and when I tried to reboot system now after the process; again the phone got stuck at the black and white Samsung Galaxy SIII screen and did not boot. The phone works fine when I odin it to stock builds but refuses to boot custom roms. Can someone help me here? I haven't been able to find a solution for days. :crying:
PS I'm a noob, don't kill me lol
edit: forgot to include I have the Tmobile variant
Click to expand...
Click to collapse
a few questions:
and i can verify the issue is something on your end, because the ROM you tried was mine, and nobody has had that issue (not booting it)
do this...
1. make sure you have the latest version of clockwordmod, don't use twrp
2. re-download my ROM (just for sake of not adding any other variables to your issue, because mine should boot)
3. put ROM on external SD card
before continuing... take a quick look at my thread here in QA titled "flashing ROMs correctly every time" .... so you can get some instruction on verifying MD5 of the download... don't worry, the thread will explain that you...
now proceed
4. boot to recovery
5. do a factory reset - 3 times do this, just to be thorough. people will say you don't need to, but like i said, just for the sake of removing variables
6. go to mounts and storage, format system 3 times - (yes, through recovery as well)
7. flash ROM, and reboot
EDIT*** i will say this, ALWAYS format system when flashing a new ROM
cobraboy85 said:
a few questions:
and i can verify the issue is something on your end, because the ROM you tried was mine, and nobody has had that issue (not booting it)
do this...
1. make sure you have the latest version of clockwordmod, don't use twrp
2. re-download my ROM (just for sake of not adding any other variables to your issue, because mine should boot)
3. put ROM on external SD card
before continuing... take a quick look at my thread here in QA titled "flashing ROMs correctly every time" .... so you can get some instruction on verifying MD5 of the download... don't worry, the thread will explain that you...
now proceed
4. boot to recovery
5. do a factory reset - 3 times do this, just to be thorough. people will say you don't need to, but like i said, just for the sake of removing variables
6. go to mounts and storage, format system 3 times - (yes, through recovery as well)
7. flash ROM, and reboot
EDIT*** i will say this, ALWAYS format system when flashing a new ROM
Click to expand...
Click to collapse
thanks for the info, will try this all out soon. I've been flashing roms for years now and have never run into anything like this, and as previously stated, this didn't occur solely with your rom which has me thinking something has happened to the phone itself. will get back to you soon and once again thank you
chucktdriscoll said:
Did you wipe data and cache when you flashed the new rom?
Click to expand...
Click to collapse
of course, wiped data, cache, & delvik
nyyankees1237 said:
of course, wiped data, cache, & delvik
Click to expand...
Click to collapse
my point is...
coming from a cm based ROM, or aokp, whatever you said... you would want to format system as well.
nyyankees1237 said:
After trying to flash a new rom after being on AOKP M1 for a little while (http://forum.xda-developers.com/showthread.php?t=1875923) the phone got stuck at the Black and white Samsung Galaxy SIII screen and didn't boot upon hitting reboot system now on cwm. Tried again, tried reflashing and the whole 9 yards wouldn't boot at all. So I turned to odin and went to the prerooted latest JB build (http://forum.xda-developers.com/showthread.php?t=1949687) and then reflashed touch cwm and tried to reflash the rom. Same problem. So, I odin'd back to the non rooted UVDLJA. Rerooted and reflashed cwm and blahblahblah. I said hmm maybe it's the rom, I then tried to flash this rom (http://forum.xda-developers.com/showthread.php?t=1993934) and when I tried to reboot system now after the process; again the phone got stuck at the black and white Samsung Galaxy SIII screen and did not boot. The phone works fine when I odin it to stock builds but refuses to boot custom roms. Can someone help me here? I haven't been able to find a solution for days. :crying:
PS I'm a noob, don't kill me lol
edit: forgot to include I have the Tmobile variant
Click to expand...
Click to collapse
I was having some of the same issues. I downloaded XquiziT's Superwipe and ran it by installing from external sd card. I ran it three times to clear everything out, then I wiped data, cache and the rest three times.
No probs for me after that.
Will definitely give that a try as well! Thank you! Will post my results when the holiday is over.
Happy thanksgiving
Sent from my SGH-T999 using xda app-developers app
Hey guys i have a samsung i747 from rogers and i'm trying to install custom roms. I've obviously rooted it and installed CM recovery and downloaded roms and gapps. So far i've tried liquidsmooth 2.8. Avatar Rom. Cyanogen. but nothing seems to be working. Every single one of the them keeps telling me that my setup wizard had crashed and my gapps weren't working. I earlier had a Status 7 error installing cyano and avatar so i flashed d2att's 07.05.13 kernel, but that didn't seem to help. I tried running a different version of the clockworkmod recovery too. I've hardly ever "dirty" flashed. Someone help me out here i hate custom roms!!!
Wipe
Data
Cache
Delvik Cache
and Factory Reset.
Make sure you're flashing the correct GApps for android 4.2.x
Flashing a kernel has nothing to do with a status 7 error.
A status 7 error points to a outdated recovery or bootloader.
You should get ANY errors.
If you hate flashing why do it??
I honestly don't get that...
If you're here to make your phone to look "cool" you're in the wrong place.
Galaxy S3 / AoCP / V4A / Turbocharged
duoblade said:
Hey guys i have a samsung i747 from rogers and i'm trying to install custom roms. I've obviously rooted it and installed CM recovery and downloaded roms and gapps. So far i've tried liquidsmooth 2.8. Avatar Rom. Cyanogen. but nothing seems to be working. Every single one of the them keeps telling me that my setup wizard had crashed and my gapps weren't working. I earlier had a Status 7 error installing cyano and avatar so i flashed d2att's 07.05.13 kernel, but that didn't seem to help. I tried running a different version of the clockworkmod recovery too. I've hardly ever "dirty" flashed. Someone help me out here i hate custom roms!!!
Click to expand...
Click to collapse
I would get TWRP recovery.. wipe dalvik / factory reset. and re-flash your rom.. I'm on Rogers as well and the status 7 error means that your recovery / bootloader is outdated.
So start by getting the most recent TWRP. I got it from goo.
btw: if you don't like custom rom, i suggest going to the sammobile site and getting your factory firmware. Use Odin to reflash back to stock. That should solve your hiatus towards custom roms...
correction
thanks guys but idk i just tried flashing a custom rom at 4.1.2 and then went up from the there and it was fine... for the status 7 i just adjusted the coding for it so it didn`t have to check the model and this was typed up like at like 2 in the morning where i`m from i meant to say i hate stock roms LMAO:silly:
duoblade said:
thanks guys but idk i just tried flashing a custom rom at 4.1.2 and then went up from the there and it was fine... for the status 7 i just adjusted the coding for it so it didn`t have to check the model and this was typed up like at like 2 in the morning where i`m from i meant to say i hate stock roms LMAO:silly:
Click to expand...
Click to collapse
sure but its fine custom Roms can be a Pain in the A$$ thats why am running stock rooted stable, great battery life, fast like custom roms, everything is perfect give a try with stock rooted no issues or problems like custom roms
Synergy Rom 4.1.2 w/ Ziggy Kernel using ATT Galaxy S3
HAPPY ROOTIN :cyclops:
this is just weird, as i have been installing custom ROM like crazy...
but for some time i was on CM 10.1.2 and didnt install any custom ROM, but i felt like coming back to TW based ROMs, so tried installing DeTmobilized 1.5, but phone stuck at boot screen, i tried to restart by pulling battery out but phone displayed "encryption failed" and kept on showing phone.apk stopped working (something similar). so i decided to ODIN to stock and start fresh, this time i tried installed Dandroid 3.8.1 and it worked, so i thought of giving DeTmobilized one more try, but again it got stuck at samsung letters at the boot.
so i decided to stick with Dandroid for a while, but now i cannot install that too. it gets stuck while booting. but if i ODIN to stock everything works fine on stock firmware, its only the custom ROMs that are not working.
i also tried repartitioning using PIT file along with stock md5 hoping that would solve this issue, but it hasnt.
i need help, i cannot stay on stock ROM.
thank you.
chirantan.f said:
this is just weird, as i have been installing custom ROM like crazy...
but for some time i was on CM 10.1.2 and didnt install any custom ROM, but i felt like coming back to TW based ROMs, so tried installing DeTmobilized 1.5, but phone stuck at boot screen, i tried to restart by pulling battery out but phone displayed "encryption failed" and kept on showing phone.apk stopped working (something similar). so i decided to ODIN to stock and start fresh, this time i tried installed Dandroid 3.8.1 and it worked, so i thought of giving DeTmobilized one more try, but again it got stuck at samsung letters at the boot.
so i decided to stick with Dandroid for a while, but now i cannot install that too. it gets stuck while booting. but if i ODIN to stock everything works fine on stock firmware, its only the custom ROMs that are not working.
i also tried repartitioning using PIT file along with stock md5 hoping that would solve this issue, but it hasnt.
i need help, i cannot stay on stock ROM.
thank you.
Click to expand...
Click to collapse
boot into recovery and wipe cache partition along with davik, that should fix the stuck
also do remember first boot will always take a while
also make sure you're using the latest custom recovery (either twrp or cwm)
i would also like to note here that i tried installing AOSP based ROMs also, and AOKP didnt work, got stuck at nexus like boot animation forever, but when i tried installing CM10.1.2 (which is what i was running when i tried to get back to TW based ROM) it worked perfectly, so for now i am back to CM, but i would really get back to flashing different ROMs and trying them out. just makes me wonder if CM is the reason i am not able to install anything else, just a thought...
has anybody else tried going to any other ROMs from CM 10.1.2?
your help is appreciated!
pcshano said:
boot into recovery and wipe cache partition along with davik, that should fix the stuck
also do remember first boot will always take a while
Click to expand...
Click to collapse
thanks for your reply, but i have tried doing that, i also wipe data and system along with cache and dalvik before installing any new ROM.
pcshano said:
boot into recovery and wipe cache partition along with davik, that should fix the stuck
also do remember first boot will always take a while
also make sure you're using the latest custom recovery (either twrp or cwm)
Click to expand...
Click to collapse
i have latest recovery , TWRP 2.6.0.0 and i have given more than an hour to boot up and still nothing. i have been flashing ROMs like an addict since i got this phone last year, but when CM 10.1 stable was released i stayed on it till today, but now i cannot install any other ROM, i can odin to stock 4.1.1 ROM or install cm 10.1.2 which i did just now, but no other ROM, either TW based on AOSP based is working...which is very weird for me.
Were you able to fix this issue at all? I am facing the same issue, in my case, the phone was encrypted on stock TW. I roooted and put in CM 10.1.2 and now when I try installing Dandroid, the install itself would work but I am struck at the "type password to unlock the screen". If I reflash CM10.1.2, I can login fine. Any pointers?
I've got a telus n2 currently running 4.3 which I hate btw. I flashed 4.1.1 radio due to mobile network drops. So that's fixed! But I'm trying to flash a new kernel as it is using 80 percent of my battery. I've tried clean install 3 times. It also drains the battery in few hrs. The rom is stock. So my problem is wherever I flash a kernel my phone soft bricks. Won't go past main screen with galaxy note 2. It will just go black screen. I've tried flashing in twrp(with the flashable file) and tried Odin. There is something I'm not doing out doing wrong. Format cache and delvik also. Any ideas? And I am trying 4.3 and 4.4 kernels.
Any ideas?
Got one to work! Devils worried like a charm.
Hey guys, i just upgraded from our t989 to a moto x and i decided to start testing roms out on the t989 since its not my main phone anymore, i only flashed about two roms and i have already done something wrong, flashed Aokp Milestone first, nothing wrong here enjoyed aokp back in 4.2.2 days. now i have always wanted to use Jedi mind trick but i was worried about the problems with it, so i made a backup of Aokp and Wiped data/wiped cache and flashed darkside wipe then flashed Jedi mind trick and rebooted. it got stuck at the splash screen like the details in the rom said but now when i try to make a backup, wipe data, cache, flash Jedi mind trick, flash darkside wipe it will freeze, i have tried flashing Cyanogenmod 10.2 and still freezes, i decided to just restore to stock but Odin 1.8.5 will not find my Device when it goes into download mode. right now i am trying my aokp Backup it had been going Fine for awhile but it looks like it might have Froze on /storage/sdcard0: mounted. any help please? i dont think i could google this problem.
Edit: now when i boot into cwm it says Can"T open /cache/recovery/last_log twice.
plugged it into a different computer and got odin working, could anyone show me the correct way to install Jedi mind trick? also it comes with that kernel so it can be overclocked to 2ghz right?
Trozzul said:
plugged it into a different computer and got odin working, could anyone show me the correct way to install Jedi mind trick? also it comes with that kernel so it can be overclocked to 2ghz right?
Click to expand...
Click to collapse
Not sure about specific jedi issues, its been inactive a long time.
But for any 4.1.2 touchwiz roms ...personally I flash twrp 2.5.0.0. 2.6.0.0 is probably OK, but any higher can cause issues with 4.1.2.
Also, you should use the infamous wipes. Darkside is outdated. I believe infamous wipes are based on dark side, but they've been updated for jelly bean. Darkside wipes stopped being updated at ICS.
See how that works.
Oh, and for more current 4.1.2 ROMs, @Rushing has a few.