Hi,
I bought this Samsung Grand from my friend and the firmware installed is from Nigeria.
Can I change the firmware to Philippines firmware so that I can receive updates.
Thanks,
Paul
DynamoOfVolition said:
Hi,
I bought this Samsung Grand from my friend and the firmware installed is from Nigeria.
Can I change the firmware to Philippines firmware so that I can receive updates.
Thanks,
Paul
Click to expand...
Click to collapse
Yes you can change the firmware, all you have to do is download the current Philippines firmware and install using Odin, then use the csc changer to change the CSC code to Philippines.
austinbabyface said:
Yes you can change the firmware, all you have to do is download the current Philippines firmware and install using Odin, then use the csc changer to change the CSC code to Philippines.
Click to expand...
Click to collapse
Is it required to change the csc code to Philippines? Will it not work if I didn't change it?
Thanks again!
DynamoOfVolition said:
Is it required to change the csc code to Philippines? Will it not work if I didn't change it?
Thanks again!
Click to expand...
Click to collapse
yes it required to install the new firmware and then use the csc changer
Also you have to root first in order to use csc changer.
austinbabyface said:
Yes you can change the firmware, all you have to do is download the current Philippines firmware and install using Odin, then use the csc changer to change the CSC code to Philippines.
Click to expand...
Click to collapse
Thanks guys!
austinbabyface said:
yes it required to install the new firmware and then use the csc changer
Click to expand...
Click to collapse
No need to change csc. You can even use any country official firmware without changing csc.
It will work like normal.
sent from my GT-N7100. Press thanks if I helped you...
---------- Post added at 03:27 PM ---------- Previous post was at 03:26 PM ----------
DynamoOfVolition said:
Is it required to change the csc code to Philippines? Will it not work if I didn't change it?
Thanks again!
Click to expand...
Click to collapse
No need to change csc.
sent from my GT-N7100. Press thanks if I helped you...
Yes there is no need to change csc but if he wants to receive updates from his current location either through kies or ota then he needs to change csc.
MBariya said:
No need to change csc. You can even use any country official firmware without changing csc.
It will work like normal.
sent from my GT-N7100. Press thanks if I helped you...
---------- Post added at 03:27 PM ---------- Previous post was at 03:26 PM ----------
No need to change csc.
sent from my GT-N7100. Press thanks if I helped you...
Click to expand...
Click to collapse
Hi, If I flashed my country's(Philippines) firmware will it change the csc code?
Thanks,
Updates can be downloaded and flashed from odin. It's easy. Even after rooting you will not get OTA and through kies.
sent from my GT-N7100. Press thanks if I helped you...
Related
Kind XDA users,
As the topic implies, I'd like to downgrade this unrooted phone.
Could anyone direct me to a to a link with the proper firmware / procedure?
Will I be able to downgrade without tripping Knox?
Phone info:
Samsung Galaxy S4 Mini GT-I9195 (8GB)
Android version: 4.4.2
Baseband version: I9195XXUNCJ6
Buildnumber: KOT49H.I9195XXUCNJ6
Kernel version: 3.4.0-3093013
Perhaps I should also note why I'd like to downgrade:
For some reason the phone gives bad signal on GSM network.
It seems it is connected normally, though sometimes people reach te voicemail without any reason.
Also outgoing calls seem to fail at that time, reboot solves this temporary.
The option "GSM only" is not available under network settings.
I put the SIM-Card in another S4 Mini on v4.2.2 the option "GSM only" is available.
(I did not select it though as the plan has data, it was just the only difference I could find other than android version.)
Tested for approx 2 week and it runs fine, problems are yet to be discovered.
Edit: feel free to move this topic, did not notice I was in the general section.
Kind regards, Stefan.
Hi Stefan!
The only one option is flash ZTO-UBUBNE2 firmware(Brazil), It don't have much bloat, 90% have option to uninstall...
Good luck, MixoMaxoViper.
Thanks for the reply, could you link me to the file?
Can it be flashed with kies or only with odin?
Also will this trip Knox?
Kind regards, Stefan.
@up
http://samsung-updates.com/
Then search for I9195--->ZTU UBUBNE2
MixoMaxoViper said:
@up
http://samsung-updates.com/
Then search for I9195--->ZTU UBUBNE2
Click to expand...
Click to collapse
And for i9190?
Will this trip Knox and how is it flashed then?
Kind regards, Stefan.
Thaevil0ne said:
Will this trip Knox and how is it flashed then?
Kind regards, Stefan.
Click to expand...
Click to collapse
That rom is official samsung rom. So it will not trip knox. Extract the downloaded zip file and u get a "tar.md5" file along with a 'dll' file.
Open odin and click on PDA or AP button and choose the extracted tar.md5 file. Then flash it.
Krik88 said:
And for i9190?
Click to expand...
Click to collapse
This ZTO-UBUBNE2 rom is meant for GT-I9195. You must find a jellybean firmware with same bootloader as kitkat firmwares.
Then you can downgrade. I have i9195, so i do not know about any jellybean firmwares for I9190 that have knox 2.0 bootloader.
Thaevil0ne said:
Will this trip Knox and how is it flashed then?
Kind regards, Stefan.
Click to expand...
Click to collapse
No, KNOX will be still 0x0
Good luck!
MixoMaxoViper said:
@up
http://samsung-updates.com/
Then search for I9195--->ZTU UBUBNE2
Click to expand...
Click to collapse
Hi all,
Thanks a lot for pointing me in the right direction.
Firmware has been flashed without any problems.
Kind regards, Stefan.
sasank360 said:
That rom is official samsung rom. So it will not trip knox. Extract the downloaded zip file and u get a "tar.md5" file along with a 'dll' file.
Open odin and click on PDA or AP button and choose the extracted tar.md5 file. Then flash it.
Click to expand...
Click to collapse
Hi, my phone brand vodafone italy and I have upgrade to 4.4.2.
After flashing brasil firmware 4.2.2 it's possible flashing firmware 4.2.2 vodafone italy?
thank you
danio.78 said:
Hi, my phone brand vodafone italy and I have upgrade to 4.4.2.
After flashing brasil firmware 4.2.2 it's possible flashing firmware 4.2.2 vodafone italy?
thank you
Click to expand...
Click to collapse
Not unless you can put the bootloader from Brazilian rom to your Italian ROM but I think that would be break the knox and probably wouldn't even work anyway.
how we can know that ,which jellybean rom have the same bootloader as kitkat?(so we can downgrade)
i want it for i9190 and i9192
00ehsan00 said:
how we can know that ,which jellybean rom have the same bootloader as kitkat?(so we can downgrade)
i want it for i9190 and i9192
Click to expand...
Click to collapse
Don't think such a rom exists for those models just i9195. That's with the new boot loader. I may be wrong though...
Thaevil0ne said:
Will this trip Knox and how is it flashed then?
Kind regards, Stefan.
Click to expand...
Click to collapse
no this has the same bootloader from kitkat you will be able to flash this without problems!
---------- Post added at 02:58 PM ---------- Previous post was at 02:55 PM ----------
danio.78 said:
Hi, my phone brand vodafone italy and I have upgrade to 4.4.2.
After flashing brasil firmware 4.2.2 it's possible flashing firmware 4.2.2 vodafone italy?
thank you
Click to expand...
Click to collapse
no ONLY the ZTO 4.2.2 hast the v2 bootloader. other 4.2.2 will fail install and maybe trigger knox
bad news for us sniff sniff
---------- Post added at 03:46 PM ---------- Previous post was at 02:58 PM ----------
u can use this:
https://forum.xda-developers.com/showthread.php?t=2706880
this is touchwiz rom with cm like customization read it. only s4 mini lte (GT-I9195,serranoltexx)
sasank360 said:
That rom is official samsung rom. So it will not trip knox. Extract the downloaded zip file and u get a "tar.md5" file along with a 'dll' file.
Open odin and click on PDA or AP button and choose the extracted tar.md5 file. Then flash it.
This ZTO-UBUBNE2 rom is meant for GT-I9195. You must find a jellybean firmware with same bootloader as kitkat firmwares.
Then you can downgrade. I have i9195, so i do not know about any jellybean firmwares for I9190 that have knox 2.0 bootloader.
Click to expand...
Click to collapse
sir file not found what im going to use ? my phone is from finland can i use diffrent rom except for NEE(finland) region
I can't downgrade mine (GT-i9190), knox doesn't allow it
Hi All,
Here is the Full S10+ G975FXXU1ASAT Fimrware .
Note:- This firmware is not demo even though the name shows FXX..
Details
AP:-AP_G975FXXU1ASAT_CL15231014_QB21824975_REV01_user_low_ship_meta_OS9.tar
CP:-CP_G975FXXU1ASAT_CP11810715_CL15231014_QB21824975_REV01_user_low_ship.tar
CSC:-CSC_OMC_OXM_G975FOXM1ASAT_CL15231014_QB21824975_REV01_user_low_ship.tar
BL:- BL_G975FXXU1ASAT_CL15231014_QB21824975_REV01_user_low_ship.tar
Here is the Full S10eG970FXXU1ASAT Fimrware .
AP:-AP_G970FXXU1ASAT_CL15231014_QB21824972_REV01_user_low_ship_meta_OS9.tar.md5
CP:-CP_G970FXXU1ASAT_CP11810712_CL15231014_QB21824972_REV01_user_low_ship.tar.md5
CSC:-CSC_OMC_OXM_G970FOXM1ASAT_CL15231014_QB21824972_REV01_user_low_ship.tar_3.md5
BL:-BL_G970FXXU1ASAT_CL15231014_QB21824972_REV01_user_low_ship.tar.md5
Here is the Full S10 G973FXXU1ASBA Fimrware .
AP:-AP_G973FXXU1ASBA_CL15445945_QB22242603_REV01_user_low_ship_meta_OS9.tar.md5
CP:-CP_G973FXXU1ASBA_CP12016348_CL15445945_QB22242603_REV01_user_low_ship.tar.md5
CSC:-CSC_OMC_OXM_G973FOXM1ASBA_CL15445945_QB22242603_REV01_user_low_ship.tar.md5
BL:-BL_G973FXXU1ASBA_CL15445945_QB22242603_REV01_user_low_ship.tar.md5
Download
https://drive.google.com/open?id=1gQspkZjujBCu0Q69oGi0Eaqj6b3EybAQ
wow amazing...!! ˃ᴗ˂
What’s the difference between this and G975F?
Colmdave said:
What’s the difference between this and G975F?
Click to expand...
Click to collapse
I hope it's the same
seems to be the S10X version if im right?
blackpanther0582 said:
Hi All,
Here is the Full S10+ G975FXXU1ASAT Fimrware .
Click to expand...
Click to collapse
Thanks. I've downloaded it.
I extracted the boot.img from the AP file and pulled the kernel config from the zImage. Interesting to see what's going to be in the stock kernel, which is 4.14.85.
ianmacd said:
Thanks. I've downloaded it.
I extracted the boot.img from the AP file and pulled the kernel config from the zImage. Interesting to see what's going to be in the stock kernel, which is 4.14.85.
Click to expand...
Click to collapse
How to extract the kernel config from the zImage friends?
ianmacd said:
Thanks. I've downloaded it.
I extracted the boot.img from the AP file and pulled the kernel config from the zImage. Interesting to see what's going to be in the stock kernel, which is 4.14.85.
Click to expand...
Click to collapse
hello my friend boot.img please share it for me?
I tried flashing my 10+ with this using Odin. Odin sais Passed but now my phone is stuck in download mode saying bootloader hashes do not match ???
---------- Post added 27-02-2019 at 12:00 AM ---------- Previous post was 26-02-2019 at 11:44 PM ----------
blackpanther0582 said:
Hi All,
Here is the Full S10+ G975FXXU1ASAT Fimrware .
Download Link
https://drive.google.com/open?id=1RNcZ2NO7-LUCWuVyOY_dFi7H1veq1Cun
Click to expand...
Click to collapse
Is this the G975F model? Or the 5G variant?
Colmdave said:
I tried flashing my 10+ with this using Odin. Odin sais Passed but now my phone is stuck in download mode saying bootloader hashes do not match ???
---------- Post added 27-02-2019 at 12:00 AM ---------- Previous post was 26-02-2019 at 11:44 PM ----------
Is this the G975F model? Or the 5G variant?
Click to expand...
Click to collapse
It can be possibly SD version .but how come it's.success anyways it won't even start in odin..the firmware posted is for Exynos chipset .if possible share an image of the bootloader so I can figure out something
blackpanther0582 said:
It can be possibly SD version .but how come it's.success anyways it won't even start in odin..the firmware posted is for Exynos chipset .if possible share an image of the bootloader so I can figure out something
Click to expand...
Click to collapse
Ok, I’ll send it on later when I’m back from work.
Guys just a little weird question ... are the sounds of the keyboard on the s10 different from before ? (on the note 8 and 9 ...) , if so where can i find them ?
Thanks !
blackpanther0582 said:
Hi All,
Here is the Full S10+ G975FXXU1ASAT Fimrware .
Download Link
https://drive.google.com/open?id=1RNcZ2NO7-LUCWuVyOY_dFi7H1veq1Cun
Click to expand...
Click to collapse
Thank You SO MUCH for your great effort!! On my S10+ works like charme
I have a question for you: do you know why, after the flash, my CSC code didn't change and got my country region?
It's very strange because itis a multi-csc firmware I saw.
P.S. If you get also g973F and g970F firmware please share it with us!
iorya984 said:
Thank You SO MUCH for your great effort!! On my S10+ works like charme
I have a question for you: do you know why, after the flash, my CSC code didn't change and got my country region?
It's very strange because itis a multi-csc firmware I saw.
P.S. If you get also g973F and g970F firmware please share it with us!
Click to expand...
Click to collapse
Yes I have both model firmware too . If needed I will upload your that too tomorrow I will create seperate thread for that :good:
iorya984 said:
Thank You SO MUCH for your great effort!! On my S10+ works like charme
I have a question for you: do you know why, after the flash, my CSC code didn't change and got my country region?
It's very strange because itis a multi-csc firmware I saw.
P.S. If you get also g973F and g970F firmware please share it with us!
Click to expand...
Click to collapse
What model is your S10+? Also did you only flash the AP in Odin or did you flash all 4 files?
Yes, please share a fw for the 973F model
blackpanther0582 said:
Hi All,
Here is the Full S10+ G975FXXU1ASAT Fimrware .
Download Link
https://drive.google.com/open?id=1RNcZ2NO7-LUCWuVyOY_dFi7H1veq1Cun
Click to expand...
Click to collapse
Okay so I flashed all 4 files you gave this time. I did NOT select repartition. Odin said passed but now it’s stuck in what seems like a charging state, there’s a black screen with charge indicator. But nothing is happening
Any link to ASBA for 975F?
blackpanther0582 said:
Yes I have both model firmware too . If needed I will upload your that too tomorrow I will create seperate thread for that :good:
Click to expand...
Click to collapse
Perfect! I got g973F so I need only the g-970F version (Multi-CSC). Let me know when it will be ready for download!
Thank you so much for your great job man!
---------- Post added at 10:51 PM ---------- Previous post was at 10:48 PM ----------
Colmdave said:
What model is your S10+? Also did you only flash the AP in Odin or did you flash all 4 files?
Click to expand...
Click to collapse
I solved the problem Colmdave. I've flashed all the partitions with SIM card inside. After flash the phone checked for the correct country and got its CSC!
This worked for g-975 and g-973 also!
iorya984 said:
Perfect! I got g973F so I need only the g-970F version (Multi-CSC). Let me know when it will be ready for download!
Thank you so much for your great job man!
---------- Post added at 10:51 PM ---------- Previous post was at 10:48 PM ----------
I solved the problem Colmdave. I've flashed all the partitions with SIM card inside. After flash the phone checked for the correct country and got its CSC!
This worked for g-975 and g-973 also!
Click to expand...
Click to collapse
Ok so the battery was just dead....After about 15 mins of being plugged into the laptop it went to 1%, then it began to reinstall firmware by itself and now seems to be working fine. Is there anyway to test it to know it is fully ok. By like restarting it a few times or something?
So I recently bought note10+ 5G (N976B) and it's running TEL csc and it's already 2 updates behind the last update from other CSC
So I downloaded new version with BTU csc from sammobile and flashed on my phone with odin but it's still on TEL csc
So what is going wrong here?
Anyone?
behdad_es said:
Anyone?
Click to expand...
Click to collapse
You're gonna need to use the app called SamKey, google it or search these forums and you'll see the requirements....i believe you need to purchase "3 credits" but the process only uses 2....
I haven't used it which is why i tell you google/search to read about it, but from what i have read for people without root it's the only way to do it now.
And if you have root, you can change it manually without need for the app.
Sent from my God Mode 10+
louforgiveno said:
You're gonna need to use the app called SamKey, google it or search these forums and you'll see the requirements....i believe you need to purchase "3 credits" but the process only uses 2....
I haven't used it which is why i tell you google/search to read about it, but from what i have read for people without root it's the only way to do it now.
And if you have root, you can change it manually without need for the app.
Sent from my God Mode 10+
Click to expand...
Click to collapse
May I ask, how to change csc manually if rooted. Thanks.
Salam,
begard peyda mikoni, Samkey application and 3 credit. man ham ba 976B flash kardam vali hanooz TEL neshon mideh
boonhim said:
May I ask, how to change csc manually if rooted. Thanks.
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo&hl=ro
"- CSC Changer: Change the CSC. This tool requires root + multi-CSC stock firmware."
megatooth said:
View attachment 4857341
https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo&hl=ro
"- CSC Changer: Change the CSC. This tool requires root + multi-CSC stock firmware."
Click to expand...
Click to collapse
What font you have?
Sent from my SM-N976B using Tapatalk
DroidSans-Bold
Guys, there´s a new SamKey version available which includes support for ALL NEW FIRMWARES (October 2020).
I just changed the CSC for my SM-G985F with FW TIB (Latest one - September patch), and it worked perfectly.
Thank mate, please give me a link for samkey.
trinhhongha90 said:
Thank mate, please give me a link for samkey.
Click to expand...
Click to collapse
Google it, it's the .org site
Does it work with HK version? (SM-G9860)
Thanks for the update! I successfully changed by G986B from BOG (Bouygues) to XEF (France), because I was annoyed of getting the bloatware when I was updating the firmware, and also because I was forced to update it manually.
Don't forget to remove the SIM card before attempting to change the CSC though. I didn't do it the first time and it didn't work, hopefully their system is smart enough that it doesn't decrease the credits if you're trying the same thing twice.
Does changing CSC allow something like bootloader unlock for US Snapdragon variants?
did someone manage to change the csc with the SM-G988B (S20 Ultra 5G Exynos) ??
thanks a lot, its means that i can change my g986b csc from atl to phe???? i have binary 4
Hi, it s posible change a csc in a s20 with bin 4? Thanks!
Best CSC for US based person, with esim, call recording and maybe retain sampay?
i tried to do it yersterday 2 times. but nothing changed
c0re_20 said:
did someone manage to change the csc with the SM-G988B (S20 Ultra 5G Exynos) ??
Click to expand...
Click to collapse
Yes. I did.
It worked without Problems
I had DBT csc and changed it to MAX with october secury pacht
ramoneluis said:
Yes. I did.
It worked without Problems
I had DBT csc and changed it to MAX with october secury pacht
Click to expand...
Click to collapse
I was able to change my CSC after I downgraded to G988BXXU4BTH5, but I also lost all my data.
i spend 2 credit yerterday. nothing happens.
c0re_20 said:
I was able to change my CSC after I downgraded to G988BXXU4BTH5, but I also lost all my data.
Click to expand...
Click to collapse
Its working
I never used SamKey
Can someone explain step by step how to do this please?
---------- Post added at 02:21 AM ---------- Previous post was at 02:15 AM ----------
Mwyann said:
Thanks for the update! I successfully changed by G986B from BOG (Bouygues) to XEF (France), because I was annoyed of getting the bloatware when I was updating the firmware, and also because I was forced to update it manually.
Don't forget to remove the SIM card before attempting to change the CSC though. I didn't do it the first time and it didn't work, hopefully their system is smart enough that it doesn't decrease the credits if you're trying the same thing twice.
Click to expand...
Click to collapse
Can you explain how you did this step by step please?
hi, i changed csc on my phone but now the csc is itv/itv,itv/eux/tmh. How i can change csc in itc/itv,itv/eux/itv?
mago988 said:
hi, i changed csc on my phone but now the csc is itv/itv,itv/eux/tmh. How i can change csc in itc/itv,itv/eux/itv?
Click to expand...
Click to collapse
You can't change the original CSC, but your current and active CSC are now ITV and that's all that matters
gehnna said:
i tried to do it yersterday 2 times. but nothing changed
Click to expand...
Click to collapse
gehnna said:
i spend 2 credit yerterday. nothing happens.
Click to expand...
Click to collapse
Make sure you remove your SIM card before doing it. Also, I removed all lock methods, like they mentioned, and it worked.
Hi all. I'm using note 20 ultra 5g n9860 tgy but now i bought s20 5g g9810 but chc and a can't sync samsung health data...
And is there a possibility to flash firmware for TGY region (both are g9810) or just to simply change it with this apk?!
And one more thing; this g9810 is chc version bought on tradingshanzen and comes with play store. If I make factory reset will I lose ps?
Thanks for answering amd helping [emoji2772]
Sent from my SM-N9860 using Tapatalk
I have a Samsung Galaxy Note10+ with XNC (Unknown) as CSC. It is running the October security patch. I wanted to know if there is any risk in flashing the November patch of INS CSC. I have flashed firmware of different CSC's on my J6 before, but the security patch was the same, so was wondering whether it will work in this case. Both the INS and XNZ firmware have the OXM thing in common, if that is of any help.
Any help would be appreciated.
HarshitKarwal said:
I have a Samsung Galaxy Note10+ with XNC (Unknown) as CSC. It is running the October security patch. I wanted to know if there is any risk in flashing the November patch of INS CSC. I have flashed firmware of different CSC's on my J6 before, but the security patch was the same, so was wondering whether it will work in this case. Both the INS and XNZ firmware have the OXM thing in common, if that is of any help.
Any help would be appreciated.
Click to expand...
Click to collapse
Hey if i get any help plz do post I'm facing the same problem need to change csc from ser to ins
mrm said:
Hey if i get any help plz do post I'm facing the same problem need to change csc from ser to ins
Click to expand...
Click to collapse
CSC Change:
https://forum.xda-developers.com/galaxy-s20/how-to/free-csc-change-apk-s20-t4116015
SIMPLY DOWNLOAD GOOGLE PHONE APP , DIALL THIS CODE AND ALL CSC APEAR.
*#*#27262826#*#*
Back up first, Everything on the device will be deleted.
thanks @adeltamimy6
guitarra.35 said:
CSC Change:
https://forum.xda-developers.com/galaxy-s20/how-to/free-csc-change-apk-s20-t4116015
SIMPLY DOWNLOAD GOOGLE PHONE APP , DIALL THIS CODE AND ALL CSC APEAR.
*#*#27262826#*#*
Back up first, Everything on the device will be deleted.
thanks @adeltamimy6
Click to expand...
Click to collapse
The link to the apk has been removed. Please provide the link if you have it
HarshitKarwal said:
The link to the apk has been removed. Please provide the link if you have it
Click to expand...
Click to collapse
No need for a link just download phone app by Google in playstore.
gm007 said:
No need for a link just download phone app by Google in playstore.
Click to expand...
Click to collapse
Yep thought you needed the theme for that lol. Did the Google phone thing and it worked