[Q] Is it possible to have more granular sound control? - Galaxy Note 8.0 (Tablet) Q&A, Help & Troubleshooti

One thing that bugged me about the Note (and most tablets/phones) was volume control. Often times I need to have the volume set low enough as to not disturb someone else in the home, but I have two choices, either I can't hear it or it is very loud.
I found a app called Fine Volume Control that allowed me to adjust the volume on a 100% scale in 1% increments or decrements. It allowed for the perfect volume level. The only part that made it suck was that you had to hit the volume up or done (sometimes making a video or whatever blast for a second) and you would get a "popup" volume control dial. Anyway, I'm assuming that the amount of control is (currently 15 points) must be somewhere in some section of the system that a root user could modify much like an app would only so that the volume buttons and sliders would adjust it properly with more levels of control.
Does anyone know if this setting exists and if yes, where would it be?

you can change the base volume in the default_gain file in system/etc but i havent found any related to adding the step...

edan1979 said:
you can change the base volume in the default_gain file in system/etc but i havent found any related to adding the step...
Click to expand...
Click to collapse
Hmm...I tried changing a few things (nothing like random guessing) and rebooted each time...doesn't seem to do much.

Related

REQUEST - Volume Control

Ive been searching everywhere for this but either nobody has thorght about it or its not possible.
with my Touch HD the volume is far to loud to listen to music as background music or through earphones and the HTC volume control step size for the volumes is too big. its either off, medium, loud or very loud!
the default WM6.1 control is even worse!
i know that you can use your finger to adjust the HTC volume control but this still isnt sensitive enough for me.
and i also know that it is possible to adjust the volume through tweak HD or advanced config. only problem with that is that I want to be able to chose to listen to very quite music or turn it up very loud without having to go through one of those settings.
so i was wondering if anybody could make a program that either has a large step size or a user defined step size for the volume and that is activated/volume through the volume buttons.
Thanks!
P.S sorry if this is in the wrong section or if there is a requests thread but i couldnt find it.
Ok i havnt found exactly what i wanted but i did find this:
http://handheld.softpedia.com/progDownload/Volume-Control-Download-35536.html
this is an aplication which lets you choose the volume with 100 steps. and it works from the system volume so using somthing like nitrogen or media player there is another 100 steps giving me 10000 steps haha
the bad points are that you must go into filemanager and manualy start it. and even then it does not work with the volume buttons.
(if anyone knows of a way to start this when powering on the device that could be useful!)
its good but not ideal.
if anyone else can come up with somthing better speak up!
create a shortcut to the exe and add it to /device/windows/startup ?
Yep, would be nice if the volume rocker can use this little tool.
Hello,
Any news on that topic ?
Thanks
I have the same problem, i think the stepsize can be changed in the registry but i dont know where i could find this.
Just to let you know the Volume rocker switch adjusts sound in 3 steps at a time. But during music play back you can use finger or stylus to adjust volume bargarph displayed on the htc HD screen in single step and thus volume is more finely controlled. There is no need to make registry changes.
The problem is, if youre using the E100 headset (or just want to press a button in your pocket to adjust volume) it would be nice if it'd adjust 1 step instead of 3 when pressing volup or voldown..
If youre moving and just want to adjust volume its really annoying to get your phone out of your jacket/pocket, pull out your stylus and lower your volume to 1..... might be just me that is a lazybones, but still!
With Good intra headset, even one bar is too much. Is it a WM limitation that the stepsize is that big ?
khanms said:
Just to let you know the Volume rocker switch adjusts sound in 3 steps at a time. But during music play back you can use finger or stylus to adjust volume bargarph displayed on the htc HD screen in single step and thus volume is more finely controlled. There is no need to make registry changes.
Click to expand...
Click to collapse
The actual problem is that 1 bar (out of the 15 available), ie the quietest setting the system is capable of, is TOO loud. I wouldn't dare use headsets at 10 bars (out of 15), the sound level would blow my eardrums out.
What we'd like to do is change the "range" of volume output - so that the output power is a LOT lower at low settings, while remaining loud enough for public broadcast (ie from the speaker on the back) at higher settings.
Anyone?
Same issue here. The minimum volume is still way too high. It's a waste of battery and could hurt your ear if you use in-ear earbuds.
Riceburner said:
The actual problem is that 1 bar (out of the 15 available), ie the quietest setting the system is capable of, is TOO loud. I wouldn't dare use headsets at 10 bars (out of 15), the sound level would blow my eardrums out.
What we'd like to do is change the "range" of volume output - so that the output power is a LOT lower at low settings, while remaining loud enough for public broadcast (ie from the speaker on the back) at higher settings.
Anyone?
Click to expand...
Click to collapse
As an addition.... I think this "too much volume" thing is something to do with the HTC TF3D music player itself.
On my (stock Rom) HD - I can listen to the FM radio at "normal" volume levels (ie about halfway up the range), but with the TF3D player - I have to turn it right down again.
Haven't tested it with other players (eg TCPMP).
Another request for a better solution to volume control.
bumpity
I have the same problem, ever since getting a set of in-ear MM50 (Sennheiser).
Too loud!
Any ideas?
gromitt said:
Another request for a better solution to volume control.
Click to expand...
Click to collapse
You may edit the registry file:
Local_machine\software\HTC\VolumeOverlay\SavedHand SetVolume
Change DWORD to 0
(soft-reset not needed)
plug in the headphone and adjust the system volume (press the volume button on side of the device and adjust the volume that is most soothing through the headset and it will memorize it! Once you pull out the headset the volume through the system speaker will be amplified as set by step 2 below. Plugin the headset again and the vol. will revert back to the headset volume level that you adjusted above).
You can always increase or decrease headset volume using the volume switch from this point and this new level you used is memorized during next headset insertion and automatically adjusted.
Step2,
This will tweak the volume that you want when headset is not plugged in.
But remember this will be the maximum volume through the speaker and you can only decrease it using the device volume button, not increase it.
You may have to experiment a few times until you get to a satisfactory volume level (don't forget to soft-reset after tweaking each time. I found 40 to be quite reasonable.
Local_machine\software\HTC\AudioManger_eng\Config\ music_player_volumn
Change the DWORD to 10 (you may have to adjust it to suit the volume you want when the headset is unplugged. In fact 10 is too low and I found 40 to be more reasonable) or lower(I think even 10 is too low!) and soft-reset the device.
the music will become lighter in the TouchFLO3D music player
I did both of the above steps and it solved the problem dramatically! It works even if you are using other software players(windows media player etc)
Edited by,
Fulham
Originally the solution came from maklik from another forum)
fulham said:
You may edit the registry file:
Local_machine\software\HTC\VolumeOverlay\SavedHand SetVolume
Change DWORD to 0
(soft-reset not needed)
plug in the headphone and adjust the system volume (press the volume button on side of the device and adjust the volume that is most soothing through the headset and it will memorize it! Once you pull out the headset the volume through the system speaker will be amplified as set by step 2 below. Plugin the headset again and the vol. will revert back to the headset volume level that you adjusted above).
You can always increase or decrease headset volume using the volume switch from this point and this new level you used is memorized during next headset insertion and automatically adjusted.
Step2,
This will tweak the volume that you want when headset is not plugged in.
But remember this will be the maximum volume through the speaker and you can only decrease it using the device volume button, not increase it.
You may have to experiment a few times until you get to a satisfactory volume level (don't forget to soft-reset after tweaking each time. I found 40 to be quite reasonable.
Local_machine\software\HTC\AudioManger_eng\Config\ music_player_volumn
Change the DWORD to 10 (you may have to adjust it to suit the volume you want when the headset is unplugged. In fact 10 is too low and I found 40 to be more reasonable) or lower(I think even 10 is too low!) and soft-reset the device.
the music will become lighter in the TouchFLO3D music player
I did both of the above steps and it solved the problem dramatically! It works even if you are using other software players(windows media player etc)
Edited by,
Fulham
Originally the solution came from maklik from another forum)
Click to expand...
Click to collapse
i just proud of my name is being posted by other
None of these thins work with noise isolating headphones where 1 bar is too loud. As soon as the phone starts to ring you are deafened as the volum is A LOT LOUDER than the music. I have the same problem with WMP as I can set a low volume in system, 3 bars, and 15-40% in WMP or an other program and the music is fine but as soon as the phone rings it absolutely kills!
man if someone solves this they'll make a few insta-friends !
We need a fix.
Many this app will help some, if not all of you !
It's a freeware developed by a member of this forum and it serves the simple purpose of allowing to set "volume steps" and replacing the default volume window. It's brilliant.
Work is still in progress, but it's already a must have at this point
http://forum.xda-developers.com/showthread.php?t=598997

How to control the headset volume?

Hello,
been searching/investigating this problem for a while and still can't find a solution.
basically, when using the stock wired headset, I find the volume during a phone call far too loud and not loud enough when listening to mp3s / radio.
when in a call, using the volume button does not seem to make any difference.
any suggestions?
thanks in advance
Go to your music tab in Manila/TouchFlo. From the menu you can choose Audio Booster. This could solve your problem with the not loud enough mp3.
For the phone "too loud" problem you can go to the settings tab -> Sound. There you have two volume controls; Ringtone and System. Lowering the system could solve your problem. But lowering using the touch volume button (as your stock headset doesn't has volume controls if i'm right), should lower the sound during a phone call.
You can push the volume buttons on the left side of the phone. Problem with this is it jumps in big increments.
But it'll also change the volume of your ringtones as well. So what you can do is:
Settings tab -> Sound -> Turn "Single Volume" off
Now when pressing the hardware key, you'll see it bring up System & Ring Tabs. So you can control your music volume without changing the ringtone volume
charlie_82 said:
You can push the volume buttons on the left side of the phone. Problem with this is it jumps in big increments.
But it'll also change the volume of your ringtones as well. So what you can do is:
Settings tab -> Sound -> Turn "Single Volume" off
Now when pressing the hardware key, you'll see it bring up System & Ring Tabs. So you can control your music volume without changing the ringtone volume
Click to expand...
Click to collapse
I forget to mention this, thanks charlie
I have the following issue myself:
Regardless how set up (single volume on/OFF, System volume set to 20% or 100%) my in-call volume of voice, once the call has started is extremely LOUD, regardless of who calls and how loud they speak.
This is even more so, if I'm using the wired headset.
Using the side volume buttons during a call do show the volume animation AND the volume bar goes down, but the actual in-call volume doesn't change a bit.
This is maddeningly loud.
Is this how it should be working?
I have stock 6.5 ROM (WWE), no hacks.
Same problem here...
... any solutions?
I have single volume turned off, and regardless if I try to turn down "ring" or "system" volume, the headset stays extremely (uncomfortably) loud...
Cheers,
Jan
Having the same problem. Is there a fix?
Not sure if Volumex fixes it on the TP2, but on my TP1 and HD2 no such problem.
i have the same problem. Volumex doens't fix it.
It's incredible that there is no solution for this stupid problem.
JanScheerer said:
... any solutions?
I have single volume turned off, and regardless if I try to turn down "ring" or "system" volume, the headset stays extremely (uncomfortably) loud...
Cheers,
Jan
Click to expand...
Click to collapse
My stock headset has a volume control, I gather yours doesn't have this feature?
no i haven't this features..
however i found the possible solution (it work for me), searching in other topic of this forum.
You mast edit the file audiopara3_TMO.csv (windows folder, it is hidden so you must use an explorer which allows to see the system hidden file like resco explorer).
basically you have in this file these lines:
F0,PHONE_HEADSET_VOL0,0,4000,4000,0,4000,C8,0,2000,0,780,FF9A,2580..
F1,PHONE_HEADSET_VOL1,1,4000,4000,0,4000,1F4,0,2000,0,780,FF9A...
F2,PHONE_HEADSET_VOL2,2,4000,4000,0,4000,5DC,0,2000,0,780,FF9A...
F3,PHONE_HEADSET_VOL3,3,4000,4000,0,4000,1388,FFFF,2000,0....
F4,PHONE_HEADSET_VOL4,4,4000,4000,0,4000,2EE0,FFFF,2000,...
F5,PHONE_HEADSET_VOL5,5,4000,4000,0,4000,61A8,FFFF,2000...
the most important value is the sixth (in hexadecimal) which is the volume value. if you use the volume level on the left side of the phone the volume of the the headset changes according the value reported in this file. I edit these values according to my "ears" ranging between c8(volume=200) and 61A8(volume=25000), and i clearly feel the change in the volume when i use the headset (you need an hex-decimal converter, there are several online)
actually (as suggested in other topic) you must point in the registry editor to this file, creating the value
HKLM\drivers\builtin\wavedev\AcousticFile and set this value to \windows\AudioPara3_TMO.csv (or rename the file as u want but with extention csv)
After editing soft reset.
In this file there are the other volume values for calls without headset, with the bt, and with the carkit. these values are in the lines
F6,PHONE_HANDSFREE_VOL0...
F12,PHONE_EARCUPLE_VOL0...
F18,PHONE_BTHEADSET...
F19,PHONE_CARKIT.
i suppose that to change the volume values on must changes the sixth parameter as in the previous case.
This works for me, and solve the problem.
I link the original discussion which helps me to find the solution:
forum.xda-developers.com/showthread.php?t=550784&highlight=audiopara
charvellano said:
no i haven't this features..
however i found the possible solution (it work for me), searching in other topic of this forum.
You mast edit the file audiopara3_TMO.csv (windows folder, it is hidden so you must use an explorer which allows to see the system hidden file like resco explorer).
basically you have in this file these lines:
F0,PHONE_HEADSET_VOL0,0,4000,4000,0,4000,C8,0,2000,0,780,FF9A,2580..
F1,PHONE_HEADSET_VOL1,1,4000,4000,0,4000,1F4,0,2000,0,780,FF9A...
F2,PHONE_HEADSET_VOL2,2,4000,4000,0,4000,5DC,0,2000,0,780,FF9A...
F3,PHONE_HEADSET_VOL3,3,4000,4000,0,4000,1388,FFFF,2000,0....
F4,PHONE_HEADSET_VOL4,4,4000,4000,0,4000,2EE0,FFFF,2000,...
F5,PHONE_HEADSET_VOL5,5,4000,4000,0,4000,61A8,FFFF,2000...
the most important value is the sixth (in hexadecimal) which is the volume value. if you use the volume level on the left side of the phone the volume of the the headset changes according the value reported in this file. I edit these values according to my "ears" ranging between c8(volume=200) and 61A8(volume=25000), and i clearly feel the change in the volume when i use the headset (you need an hex-decimal converter, there are several online)
actually (as suggested in other topic) you must point in the registry editor to this file, creating the value
HKLM\drivers\builtin\wavedev\AcousticFile and set this value to \windows\AudioPara3_TMO.csv (or rename the file as u want but with extention csv)
After editing soft reset.
In this file there are the other volume values for calls without headset, with the bt, and with the carkit. these values are in the lines
F6,PHONE_HANDSFREE_VOL0...
F12,PHONE_EARCUPLE_VOL0...
F18,PHONE_BTHEADSET...
F19,PHONE_CARKIT.
i suppose that to change the volume values on must changes the sixth parameter as in the previous case.
This works for me, and solve the problem.
I link the original discussion which helps me to find the solution:
forum.xda-developers.com/showthread.php?t=550784&highlight=audiopara
Click to expand...
Click to collapse
Thanks, this worked like a charm!
charlie_82 said:
You can push the volume buttons on the left side of the phone. Problem with this is it jumps in big increments.
Click to expand...
Click to collapse
I know this is probably stating the obvious, but if you press the volume button and you see the volume bar you can always adjust it to your liking by swiping your finger up and down on the volume bar. This way you can get the inbetween volumes between too loud and too low.

[Q] App to increase volume by small increments

Hi guys
Hope I am posting this in the right place. I'm looking for an app that allows me to increase the volume on my gs2 by smaller increments than the volume rocker does standard? Basically every time i hit up or down on the volume rocker the difference is huge. I can't seem to find the right volume for music. One notch will be too quiet, the next one up is too loud. My setup is:
2.3.4 stock, unrooted
Equalizer app custom eq
poweramp eq
Ultimate ears super fi noise isolating headphones
I use these settings and apps because standard it sounds rubbish. i've finally got my sounds right, but can't get the right volume! I've tried heaps of apps from the market, volume+, volume control, etc. All increase the volume by the standard 10% increment rather than the 5% i'm looking for. Fine volume control sort of worked, but it seemed after i adjusted the volume it would quickly revert in a second or two.
Any help would be greatly appreciated
archheretic said:
Fine volume control sort of worked, but it seemed after i adjusted the volume it would quickly revert in a second or two.
Click to expand...
Click to collapse
Hi, that shouldn't be happening; are you using the hardware volume buttons to change the volume? You have to use the dial or in-app sliders to modify the volume, if you use any other app to change the volume (or the rocker buttons), then it will move in larger increments.
If you need more a longer time to trial it, then PM/email me your UUID (menu/preferences then hold down your back button)
Thanks, I will give this another try and report back.
Sent from my GT-I9100 using xda premium
With some more experimentation, this works really well, so I bought it two things I was wondering about though, is there any way to lock volume, as I must be knocking as it shoots right up, and is there any way to save as a preset?
Sent from my GT-I9100 using xda premium
archheretic said:
With some more experimentation, this works really well, so I bought it two things I was wondering about though, is there any way to lock volume, as I must be knocking as it shoots right up, and is there any way to save as a preset?
Click to expand...
Click to collapse
Presets are a possible future addition.
Not sure about volume lock, there are apps in the market like "RingGuard" and "Volume Locker" which would work - but only if you moved the volume enough to trigger an API level volume change, which is approx every 10-20%.
is there any way to lock volume, as I must be knocking as it shoots right up
Click to expand...
Click to collapse
The volume slider shoots up when you press the hardware volume buttons? That's normal - it's because of how your device volume is calibrated (by the ROM).
The default volume stages aren't evenly spread across the entire available range. Our app shows the full range available, so when you press the volume buttons (from outside our app) it can appear to jump. It is effectively jumping, because the default API doesn't allow you to access those volume levels that lie between jumps (but you can with fine volume).
Basically, all other volume control apps and the Android system show the volume in terms of API volume levels. Fine volume control shows the volume in terms of the full available range. All other apps (and the volume hardware buttons) change the volume in terms of API levels.
It shoots up when using the dial. I've tried changing the sensitivity as well. Seems to always shoot media volume to 94%. It only does this occasionally though. All in all a great app!
Sent from my GT-I9100 using xda premium
Just to confirm, the dual on the far left is the overall volume? So if I am at 90% media volume but 7% overall, the media volume is 90% of the 7%, not of its possible maximum?
Sent from my GT-I9100 using xda premium
archheretic said:
Just to confirm, the dual on the far left is the overall volume? So if I am at 90% media volume but 7% overall, the media volume is 90% of the 7%, not of its possible maximum?
Click to expand...
Click to collapse
No, each slider is independent from the rest (ringer and notification are locked together though). There is no overall volume control.
The slider on the left (Android logo) is "System" volume, things like Screen lock sounds.
I have a rooted HTC Desire running Cyanogenmod 7 for which I wanted fine volume control. I like to be able to change volume using the rocker but it instantly shoots to 100% and that is extremely painful when using canalphones. I have uninstalled fine volume control 2 because I don't want to run the risk of insane volume levels.
Does anyone have any idea if this can be built into the volume API and have reliable hardware control?
Tyr said:
I have a rooted HTC Desire running Cyanogenmod 7 for which I wanted fine volume control. I like to be able to change volume using the rocker but it instantly shoots to 100% and that is extremely painful when using canalphones. I have uninstalled fine volume control 2 because I don't want to run the risk of insane volume levels.
Does anyone have any idea if this can be built into the volume API and have reliable hardware control?
Click to expand...
Click to collapse
Were you using the dial/overlay to change the volume?
Did the overlay not respond to your initial gesture, then suddenly "catch-up"?
Were you turning the volume up when it jumped?
I'm really sorry about this, I'll try and put in some volume limiter to prevent it happening.
richardop said:
Were you using the dial/overlay to change the volume?
Did the overlay not respond to your initial gesture, then suddenly "catch-up"?
Were you turning the volume up when it jumped?
I'm really sorry about this, I'll try and put in some volume limiter to prevent it happening.
Click to expand...
Click to collapse
Sorry for the late reply.
Dial/overlay worked as expected. what was causing problems was accidental use of the hardware buttons. Because that is what I am used to using. The app does not change hardware button behaviour and actually makes it worse as the volume can go almost instantly from 0 to 100% when touching the rocker.
Tyr said:
Sorry for the late reply.
Dial/overlay worked as expected. what was causing problems was accidental use of the hardware buttons. Because that is what I am used to using. The app does not change hardware button behaviour and actually makes it worse as the volume can go almost instantly from 0 to 100% when touching the rocker.
Click to expand...
Click to collapse
The main volume app component overrides the hardware buttons and increases/decreases the volume by 1% each time you tap the button.
If the main volume app isn't currently on top, it can't override the hardware buttons (the overlay can't override either). It's a limitation of the Android system.
Each time you hit the hardware buttons from outside of the app, the volume will change in the default way (15 stages for media).
I've had a few reports of a bug when using earphones on the SGSII of erratic volume levels, so I have since added a volume limiter for when using headphones to workaround that sort of issue.

[Q] one volune

i am not here much as i am not a super programer but is there any way to make one volume that adjusts all volumes on the note 2. my previous androids had a selection that let me combine all my volumes. It just seems to be a pain in the ass to keep having to open my volume controls and adjust each one seperately everytime i go into a meeting or movie or whatever. I know this seems stupid but any help would be awesome
i don't think it's possible because they are multi file inside the rom for each volume
this is my opinion so..............i'm not 100% this is the best answer
razvanrudy said:
i don't think it's possible because they are multi file inside the rom for each volume
this is my opinion so..............i'm not 100% this is the best answer
Click to expand...
Click to collapse
It is assumed that the volume buttons perform this function? At least for me when using the volume down button, you reduce the overall volume for notifications, media, ringer, etc.
However, maybe I misunderstood his request.
luismedina said:
It is assumed that the volume buttons perform this function? At least for me when using the volume down button, you reduce the overall volume for notifications, media, ringer, etc.
However, maybe I misunderstood his request.
Click to expand...
Click to collapse
yes is there any way where volume button controls all volumes at once without opening my settings?

App/Patch to stop the phone going into silent mode

Anyone know of an app or update that can stop the volume rocker sending the phone into silent mode. My son's old phone volume rocker only went down to vibrate so now he keeps turning the sound of by habit/accident.
You could use Tasker for this. Create a profile that every (few) minute(s) would set the volume to the desired level. That way the phone will stay on silent at most for the period between two consecutive profile triggers.
Cheers!
Thanks though it's not what I really want. I don't want a set volume level, just to stop it being put into full silent mode by the buttons.
As far as I know, there's no easy way into intercepting and blocking volume keys. It's hardcoded into Android and can only be modified into custom ROMs (like skip tracks in CyanogenMod). But I don't know of anything that does what you want. So that's why I presented you this workaround.
daniel_loft said:
As far as I know, there's no easy way into intercepting and blocking volume keys. It's hardcoded into Android and can only be modified into custom ROMs (like skip tracks in CyanogenMod). But I don't know of anything that does what you want. So that's why I presented you this workaround.
Click to expand...
Click to collapse
Thanks again, I do appreciate it but that is not a workaround that actually achieves what I want, that would cause a fixed volume, I want to be able to change the volume and go vib only but avoid silent.

Categories

Resources