Related
Cheers ,
pls helm me .
First i cant wright in this forum : http://forum.xda-developers.com/showthread.php?t=2763593 , im newbie
i flash this rom : [ROM]KK_ Huawei P6_all in EN(BbN)_based on_repack SLMINSK and now my phone rise temperature very quickly and very much , i cant hold like this .... and phone said i need to close some apps but in backgrounds only one app running
any ideea ? Thx
strutzu2007 said:
Cheers ,
pls helm me .
First i cant wright in this forum : http://forum.xda-developers.com/showthread.php?t=2763593 , im newbie
i flash this rom : [ROM]KK_ Huawei P6_all in EN(BbN)_based on_repack SLMINSK and now my phone rise temperature very quickly and very much , i cant hold like this .... and phone said i need to close some apps but in backgrounds only one app running
any ideea ? Thx
Click to expand...
Click to collapse
Do a factory reset. And after that make a ckean install. Flash again that ROM.
Unplug the USB cable while you doing it.
Mr.DonDroid said:
Do a factory reset. And after that make a ckean install. Flash again that ROM.
Unplug the USB cable while you doing it.
Click to expand...
Click to collapse
thx for quick answer , i make a clean install ( wipe : dalvik, cache, data, system ) and flash again with cable unplug ...but no change ,
if i run only one app a less then 5 min my phone overheating .
i ll flash : B507 Modified by Reyncla... much better... for me .
thx .
strutzu2007 said:
thx for quick answer , i make a clean install ( wipe : dalvik, cache, data, system ) and flash again with cable unplug ...but no change ,
if i run only one app a less then 5 min my phone overheating .
i ll flash : B507 Modified by Reyncla... much better... for me .
thx .
Click to expand...
Click to collapse
Good, enjoy.
sir mordred .i am a newbie here and i have tried to flash ur kernel in my cm11 4.4.3 lafactorial's DCM rom...but i have always got installation aborted error while doing so pls help me to install the kernel sir
razeef23 said:
sir mordred .i am a newbie here and i have tried to flash ur kernel in my cm11 4.4.3 lafactorial's DCM rom...but i have always got installation aborted error while doing so pls help me to install the kernel sir
Click to expand...
Click to collapse
Hi, the problem is either the file wasn't downloaded completely or you cancelled the operation in the middle of the transfer and flashed it to the phone. Try re-downloading and re-flashing the kernel, that should fix it
razeef23 said:
sir mordred .i am a newbie here and i have tried to flash ur kernel in my cm11 4.4.3 lafactorial's DCM rom...but i have always got installation aborted error while doing so pls help me to install the kernel sir
Click to expand...
Click to collapse
hi mate
download the kernel and open the zip file you'll see build.prop under system folder delete it and then flash the kernel
sir mordred said:
hi mate
download the kernel and open the zip file you'll see build.prop under system folder delete it and then flash the kernel
Click to expand...
Click to collapse
sir thank u for ur reply... i have already deleted that build.prop file from that system folder... even though i'm facing the problem of installation aborted ... and some error logs shown in cwm... here its midnyt sir... will post the screenshot of my error message in the morning...kindly help me sir...
MayB4ck said:
Hi, the problem is either the file wasn't downloaded completely or you cancelled the operation in the middle of the transfer and flashed it to the phone. Try re-downloading and re-flashing the kernel, that should fix it
Click to expand...
Click to collapse
thank u for ur reply sir... but i have checked that file it was downloaded properly and i have download that file directly in my mobile.... its showing some error while flashing the file
sir mordred said:
hi mate
download the kernel and open the zip file you'll see build.prop under system folder delete it and then flash the kernel
Click to expand...
Click to collapse
sir this is what i get during flashing the kernel file
sorry sir... it's my fault... i have updated my cwm to 6.0.4.8... now everything is working fine ... and thank u for this awesome kernel
Increase Camera Quality To "8 MP" ( For Micromax A177 & A77 Canvas Juice )
Hello Friends....
Here I Come Back With New Mode (8 MP Camera Patch)......:laugh:
NOTE :- Your phone has to be rooted and CWM recovery installed in it ..
* Here Are The Steps To Install This Mode....
-->> First Download "8 MP Camera Mode" From Here
-->> Now paste the zip file in to ur sd card (outside from any folder).
-->> Then goto CWM recovery ( By holding volume up + Power key).
-->> Now select "choose zip to install from sdcard".
-->> Then browse and select the "8 MP Camera Patch(MMX A177 & A77 CANVAS JUICE).zip" file and Flash it .
-->> Then select "reboot system now"..
-->> Thats it ... U have done all the Steps .
-->> Enjoy ..!!!
Revert Back To Original Camera
As Many members request i Made this Revert back to Original 5 MP Camera ... Flash This File
CREDITS :- Thanx to "GeekShivam" for lib Files...
:victory:If U like My work Press Thanx Button:victory:
going to flash on my a177
can you give me source from you got 8 mp camera?
or you taken lib of a57?
SK(SurajKumar) said:
can you give me source from you got 8 mp camera?
or you taken lib of a57?
Click to expand...
Click to collapse
nops bro ....it is not a57 lib files ..
its wrkg great..
Thks a lot...really works...even hdr mode also there....
can it work on a57 too
Monty728 said:
nops bro ....it is not a57 lib files ..
Click to expand...
Click to collapse
will you share me ? that libs or tweak?
Thanks, it works, HDR also works.
Sent from my Micromax A177 using Tapatalk 2
SK(SurajKumar) said:
will you share me ? that libs or tweak?
Click to expand...
Click to collapse
Here are the lib files http://forum.xda-developers.com/attachment.php?attachmentid=2804778&d=1403071383
SK(SurajKumar) said:
will you share me ? that libs or tweak?
Click to expand...
Click to collapse
nop bro it is for micromax a177.. it doesnt wrk on a57
hey..i dont have cwm recovery....can u please give the link
iam not able to do it . can anybody help me
I was unable to do it when iam selecting apply updates from sd card in cwm recovery it showa installations aborted . can somebody help me .
developing a rom
can you please develop a samsung galaxy s5 rom for my device micromax bolt A068. please.............. bro
increased the camera megapixel but now phone reboot or turn on slowly
i added this and increased the camera megapixel and it worked fine but the problem is whenever i reboot or power on my phone it starts slower then before :/ any idea how i can fix that ?
Same problem as manish sarpal
go for install zip for sd card instead of apply update frm sd card...!!!!
Manish Sarpal said:
I was unable to do it when iam selecting apply updates from sd card in cwm recovery it showa installations aborted . can somebody help me .
Click to expand...
Click to collapse
go for install zip for sd card instead of apply update frm sd card...!!!!
When i flash the .zip file it shows installation aborted.
When i flash the .zip file it shows installation aborted. Please Help me.
I flashed it it works good.. But would u please upload a zip with factory setting....
Sent from my Micromax A177 using xda app-developers app
hi
hi
even not able to get that option "install drom the zip" in cwm recovery.
kindly suggest the solution to solve this issue.. as many users facing this issue
---------- Post added at 06:49 AM ---------- Previous post was at 06:45 AM ----------
Hello. said:
i added this and increased the camera megapixel and it worked fine but the problem is whenever i reboot or power on my phone it starts slower then before :/ any idea how i can fix that ?
Click to expand...
Click to collapse
Hi, pls may I know how u did it
buddy I need ur help...
nidhin.prasad26 said:
Thks a lot...really works...even hdr mode also there....
Click to expand...
Click to collapse
Hi,
even not able to get that option "install drom the zip" in cwm recovery.
kindly suggest the solution to solve this issue.. as many users facing this issue :crying:
I'm also getting installation aborted issue. I googled but there are solutions for status 6 or status 7 errors. But I'm not getting any error status. Just aborting everytime. Please, help.
[email protected] said:
I'm also getting installation aborted issue. I googled but there are solutions for status 6 or status 7 errors. But I'm not getting any error status. Just aborting everytime. Please, help.
Click to expand...
Click to collapse
Dwnload the mod again ... Use twrp to flash .. If prblm still presist then tell me
sent from My beast "Redmi Note 3g"
Q&A for Corsifame 2 rom Kitkat themed
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
problem with lockscreen
Heloo i gt a problem with my lockscreen its not fitting im the screen proprly.. nd my device has bcm a bit slow aftr dat updting rom. Im using galxy fame gt-s6810p xxamd2 u wnt find dis model coz its manufactured in middle east may b i cnt send u the screenshot coz im not allowed ...
anna_anderson said:
Heloo i gt a problem with my lockscreen its not fitting im the screen proprly.. nd my device has bcm a bit slow aftr dat updting rom. Im using galxy fame gt-s6810p xxamd2 u wnt find dis model coz its manufactured in middle east may b i cnt send u the screenshot coz im not allowed ...
Click to expand...
Click to collapse
If its slow try to uninstall unused apps and disable system apps you don't use. Watchout which you disable. Also try wiping cache/dalvik-cache. Why aren't you allowed to send screenshot? If you mean that you can't send it to him like that then just post it as attachment. I don't have the device so I can't recreate it.
anna_anderson said:
Heloo i gt a problem with my lockscreen its not fitting im the screen proprly.. nd my device has bcm a bit slow aftr dat updting rom. Im using galxy fame gt-s6810p xxamd2 u wnt find dis model coz its manufactured in middle east may b i cnt send u the screenshot coz im not allowed ...
Click to expand...
Click to collapse
Maybe u try corsifame 1 or 2 (not kitkat themed) . I also have s6810pxxamd2 . and i'm not having any problems with these ROM
and use mods like pure-performance ,pure graphics this will help u a bit from lag.
toshiro71 said:
Maybe u try corsifame 1 or 2 (not kitkat themed) . I also have s6810pxxamd2 . and i'm not having any problems with these ROM
and use mods like pure-performance ,pure graphics this will help u a bit from lag.
Click to expand...
Click to collapse
and supercharge + Fly On Mod ,,make smooth ,,and highly multitasking
hellooo
toshiro71 said:
Maybe u try corsifame 1 or 2 (not kitkat themed) . I also have s6810pxxamd2 . and i'm not having any problems with these ROM
and use mods like pure-performance ,pure graphics this will help u a bit from lag.
Click to expand...
Click to collapse
Can u plzzx send me the link of the current rom which u r using nd the mods which u mentioned..
Thnkyou..!!
anna_anderson said:
Can u plzzx send me the link of the current rom which u r using nd the mods which u mentioned..
Thnkyou..!!
Click to expand...
Click to collapse
I'm currently using Corsifame 1 (corsifame 2 is better , i just didnt use it becuz of some icon stuff) and . im using malive booster mod and viper4android(sound mod) and pure graphics.
corsifame 1 link >>> http://forum.xda-developers.com/showthread.php?t=2705741
corsifame 2 link >> http://forum.xda-developers.com/showthread.php?t=2798571
Other Links >>> Just use search option Take your time
And about lockscreen issue, i guess this may fix it. If u hav root explorer or any which can acess to root directory.....
go to System>build.prop and open it with text editor and see if lcd_density=160( generally this causes lock screen not fit in screen as i've encounter it) . see screenshot below..
toshiro71 said:
Maybe u try corsifame 1 or 2 (not kitkat themed) . I also have s6810pxxamd2 . and i'm not having any problems with these ROM
and use mods like pure-performance ,pure graphics this will help u a bit from lag.
Click to expand...
Click to collapse
hey thnks fr the suggestion...nd i wnt to ask u 1 more thing that does gl tool wrk on my mob .. nd how to do the system partition ... i went to recovery nd did system partition ...but nothing happend.. again the 1st page of recovery came . no procces nothing it showed .. nw i will do the partition so i can run gl tools to play games .
thanks..
anna_anderson said:
hey thnks fr the suggestion...nd i wnt to ask u 1 more thing that does gl tool wrk on my mob .. nd how to do the system partition ... i went to recovery nd did system partition ...but nothing happend.. again the 1st page of recovery came . no procces nothing it showed .. nw i will do the partition so i can run gl tools to play games .
thanks.. ]
GL Tools works perfectly, no issue at all, and u dont need partition to use GL Tools . and its is bug in CWM about making partition i guess(i never tried though xD) , I'm using GL Tools on like every game to run even more smoothly
Just install Gl Tools>open it>enable ur mobile data>choose something(i fotgot the word)>and install>ur mobile will restart and u are fine to go
Good Luck
Click to expand...
Click to collapse
sorry about not fixing the issue coz im using wulsic's cm11. im very busy right now since i have many trainings required by my company but if i have time i'll look into it. oh and if you change the lcd density some samsung apps will force close so watch out.
blackwatch92 said:
sorry about not fixing the issue coz im using wulsic's cm11. im very busy right now since i have many trainings required by my company but if i have time i'll look into it. oh and if you change the lcd density some samsung apps will force close so watch out.
Click to expand...
Click to collapse
Google play store and service (idk about others) dont FC if u change density i've already tried those . No i wont because 160 is default density in fame . Trainings are great btw Good Luck
Is this custom rom work on fame s6812i dual sim?
hey toshiro i hav the same thing wriiten lcd_ something now hw do i fix?
i hav to edit?
Sent from my GT-S6810P using XDA Free mobile app
toshiro71 said:
Google play store and service (idk about others) dont FC if u change density i've already tried those . No i wont because 160 is default density in fame . Trainings are great btw Good Luck
Click to expand...
Click to collapse
anna_anderson said:
hey toshiro i hav the same thing wriiten lcd_ something now hw do i fix?
i hav to edit?
Sent from my GT-S6810P using XDA Free mobile app
Click to expand...
Click to collapse
I suggest not to change dpi because Phone app will crash every time you make a call because of the incall ui... Or with other words you won't be able to make or receive calls.. I tried every possible combination of dpi and didn't worked.. And another thing is that, in build.prop are 2 of the ro.sf.lcd_density like in the screens i attached. You can delete one of them or change the value on both, but if you change only in one, it won't change. Cheers!
Sent from my GT-I9300 using Tapatalk
hey... emotions are not.. supported in dis rom. in the notification emojis dosnt appears.. so whts the solution. ? thnxc.
Sent from my GT-S6810P using XDA Free mobile app
anna_anderson said:
hey... emotions are not.. supported in dis rom. in the notification emojis dosnt appears.. so whts the solution. ? thnxc.
Sent from my GT-S6810P using XDA Free mobile app
Click to expand...
Click to collapse
8sms has emoji and looks better.. To use only this app enter Settings>Applications>All, search for Messages and disable it, or else you will get notifications from both apps when you will receive a message. Cheers!
Sent from my GT-I9300 using Tapatalk
dude... but dats fr messaging. im trying to tell dt like whn some1 send me emoji on whts app the notification appears. but it dsnt show the emoji on notification panel. same like on insta i cant see the emojis.
Sent from my GT-S6810P using XDA Free mobile app
anna_anderson said:
dude... but dats fr messaging. im trying to tell dt like whn some1 send me emoji on whts app the notification appears. but it dsnt show the emoji on notification panel. same like on insta i cant see the emojis.
Sent from my GT-S6810P using XDA Free mobile app
Click to expand...
Click to collapse
I'm afraid there isn't a sollution for this.. Emoji support in notifications panel has been implemented only since Kitkat.. On jellybean you can see emoticons only in apps..
Sent from my GT-I9300 using Tapatalk
Battery icon not showing
Everything else works 100% , every time I go to settings -> battery Style I get Settings Stopped.
Discontinued/Abandoned
Sorry guys for not having support since cm11 is booting and stable:crying:
Hey guys:
This is fix for Empty APN problem in custom ROMS like (Semi,S5,etc...)
Download attached file
then flash it through Recovery.
Don't Forget To hit THANKS :good:
YSH ALSAGER said:
Hey guys:
This is fix for Empty APN problem in custom ROMS like (Semi,S5,etc...)
Download attached file
then flash it through Recovery.
Don't Forget To hit THANKS :good:
Click to expand...
Click to collapse
Hii YSH i tried this method but did not work. Still the problem persist.
Whenever i try to update my phone software it says Net error, change APN setting.
mukeshmiki said:
Hii YSH i tried this method but did not work. Still the problem persist.
Whenever i try to update my phone software it says Net error, change APN setting.
Click to expand...
Click to collapse
Persist?
Which ROM bro?
YSH ALSAGER said:
Persist?
Which ROM bro?
Click to expand...
Click to collapse
I am using S5 mini rom and top of that i have flashed lollipop theme.
mukeshmiki said:
I am using S5 mini rom and top of that i have flashed lollipop theme.
Click to expand...
Click to collapse
It works, I tried it before, but you can create New APNs Manually
mukeshmiki said:
I am using S5 mini rom and top of that i have flashed lollipop theme.
Click to expand...
Click to collapse
Ok i will try
YSH ALSAGER said:
Hey guys:
This is fix for Empty APN problem in custom ROMS like (Semi,S5,etc...)
Download attached file
then flash it through Recovery.
Don't Forget To hit THANKS :good:
Click to expand...
Click to collapse
worked.. bt 1 problem how to set mobile data sim 2 when i tap data sim call 2 nothing changed stil on sim 1 ho i can use sim 2
hi this patch is not working for me . i have mini s5 rom in my device and i copied patch on my phone memory and installed throgh recovery but apn field is empty yet and there is not any option to add APN manually
please help me
KEYVAN-GSM said:
hi this patch is not working for me . i have mini s5 rom in my device and i copied patch on my phone memory and installed throgh recovery but apn field is empty yet and there is not any option to add APN manually
please help me
Click to expand...
Click to collapse
Download UDN app then go to APN settings, Hold UDN Back button, You'll see New Apn Option
YSH ALSAGER said:
Download UDN app then go to APN settings, Hold UDN Back button, You'll see New Apn Option
Click to expand...
Click to collapse
i install the patch now showing the APN but still i can not go internet please help me
gayanisuru said:
i install the patch now showing the APN but still i can not go internet please help me
Click to expand...
Click to collapse
Bro
Edit Your APNs manually
The problem is exist. i used kitkat minirom
Now what can ii do????
APN not working in CM10
Bro
This zip dosent work for CM10
Can U please make one for CM10
Please...............
instal this zip and use app ''APN settings'' to auto settings 3g all country
this link app settings https://mega.nz/#!yJVy3IyY!LSfG9VFTmNDnNdELEoyDgj_ebvpc4y3x1mjwB9XwDEY
Thanks