I'm now on my 3rd S3 which thankfully is still covered by warranty. I really would like to avoid having to go through this over and over but I'm not sure how to avoid the charger port not working properly over time. I don't think I've done anything really to provoke it. I think the case might have angled the port a little so I'll likely stop using that case
I'm curious though - is anyone else experiencing this? Looks like I can do self repair but it would require soldering skills which I don't have
Sent from my SGH-I747 using Tapatalk 4
What case do you have?
Sent from my SAMSUNG-SGH-I747
Yes, have had one phone replaced already. This one is flaky as well. Bought a wireless charger for it, but have to use air droid for file transfers.
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Aybarrap1 - I have an authentic and a fake spigen neo hybrid case
Micronads - never thought of that. I think I would prefer that option. What wireless charger are you using
Sent from my SGH-I747 using Tapatalk 4
Is induction charging possible with just the coil behind the battery cover
Sent from my SGH-I747 using xda app-developers app
thanitos said:
Is induction charging possible with just the coil behind the battery cover
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
It looks like that is the case. I'm going to try it out myself. Ordered the receiver from Fast Time and a Nokia wireless charging pad from AT&T
Please read forum rules before posting
Questions and Help issues go in Q&A and Help section
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
andy_d0 said:
I'm now on my 3rd S3 which thankfully is still covered by warranty. I really would like to avoid having to go through this over and over but I'm not sure how to avoid the charger port not working properly over time. I don't think I've done anything really to provoke it. I think the case might have angled the port a little so I'll likely stop using that case
I'm curious though - is anyone else experiencing this? Looks like I can do self repair but it would require soldering skills which I don't have
Sent from my SGH-I747 using Tapatalk 4
Click to expand...
Click to collapse
I'm having a similar issue in that I cannot charge the phone via the USB. It starts to charge but then the LED goes off. By the morning I am down to 3% charge after 7 hours of being plugged in. I have tried 3 different batteries, 4 cables and ac adapters. I reflashed to stock and then had a Samsung guy at Best Buy reflash again. Same thing happens. The only way I can charge is with an external battery charger or if I use an iPad was charger with my USB cable...go figure.
My S3 is only a couple months old, but so far, it's holding up nicely. Is the issue actually with the charge port, or with lint from your clothes preventing the charger from connecting to the pins in the port?
No phone could have a worse charge port than the Evo 4G. I was lucky to never have an issue with it, but I know tons of people did.
I cleaned the lint out, but it still would not work properly. I also tried different batteries, cables, wall ports, usb ports, everything.
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
---------- Post added at 09:09 PM ---------- Previous post was at 09:08 PM ----------
andy_d0 said:
Aybarrap1 - I have an authentic and a fake spigen neo hybrid case
Micronads - never thought of that. I think I would prefer that option. What wireless charger are you using
Sent from my SGH-I747 using Tapatalk 4
Click to expand...
Click to collapse
I have the qi charge station and induction pad. Just install on battery. Works great
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Related
Last night I shut my phone off around 11pm and went to bed. The phone was at 48% when I plugged it in. This morning, I woke up around 6am and thought it was a little odd that the light on my phone was still red. When I turned my phone on it was only at 82%. After 7 hours it only charged 34%. Does anybody have any ideas why? I am on the latest Jellybomb.
I did post this in the Jellybomb Q and A thread but I figured it might be better to start a separate thread as I do not think it is Rom related?
Did you use the charger that came with the phone or another charger? I've noticed that my phone will only charge properly with high amperage chargers.
This is especially true if something is going on in the background (e.g. Titanium Backup).
Sent from my SPH-L900 using xda premium
Yes I did, that is the weird thing. Also the phone was off, so nothing running in the background!
there are known issues with the security of the cable that comes with the phone, it might have been loosely inserted into the phone
Sent from my SPH-L900 using xda app-developers app
reinaldistic said:
there are known issues with the security of the cable that comes with the phone, it might have been loosely inserted into the phone
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Thank you for the heads up! I was not aware that there was a known issue.
reinaldistic said:
there are known issues with the security of the cable that comes with the phone, it might have been loosely inserted into the phone
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Yup. The stock cable does not click wjen inserted, and doesn't even fit securely in the connector. I think I've noticed that my 2A HP Touchpad charger charges quicker than my stock N2 charger...problem with a device with great battery life, testing charging can't happen that often
Sent from my SPH-L900 using Tapatalk 2
Odd... I must have gotten a cable from a different batch, because mine definitely clicks. I wonder if Sammy fixed the problem by the time I got around to ordering my GN2 (I purchased mine from Sprint a couple of weeks or so ago).
Is it a problem with the cable or the connector on the phone?
Sent from my SPH-L900 using xda premium
omnidroid said:
Odd... I must have gotten a cable from a different batch, because mine definitely clicks. I wonder if Sammy fixed the problem by the time I got around to ordering my GN2 (I purchased mine from Sprint a couple of weeks or so ago).
Is it a problem with the cable or the connector on the phone?
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
My phone I got from local brick and mortar corporate Sprint last Friday all baggies in the retail box were factory sealed. Definitely a cable problem, my Touchpad charger clicks fine.
Sent from my SPH-L900 using Tapatalk 2
Similar wird thing also happened to me few months ago. Bought noname charger for my phone and always had battery problems.
I can also confirm that the stock cable doesn't click and it loosens very easily. I tried my s3 cable and that one is perfect. It isn't loose compared to gn2. Also hp charger does seem to charge any of my gadgets faster than usual.
Sent from my SPH-L900 using xda premium
With news that the Nexus 4 Wireless Charging Orb is being release in February, I'm curious to know if anyone has tested out this ability on their LGOG..... If specs are very similar to the Nexus 4, would the Charging Orb work....
It would be sweet to get this or some sort of wireless charger for our LGOG :fingers-crossed:
won't work
There has to be a wireless adapter usually on the back of the battery door for it to work. Unfortunately the nexus 4 has it, and the LGOG doesn't.
Some companies make aftermarket adapters for popular phones, however with a so called "non-removable" battery, it doesn't seem likely for us. But we can hope...
Sent from my Sprint OG!
johnq54 said:
There has to be a wireless adapter usually on the back of the battery door for it to work. Unfortunately the nexus 4 has it, and the LGOG doesn't.
Some companies make aftermarket adapters for popular phones, however with a so called "non-removable" battery, it doesn't seem likely for us. But we can hope...
Sent from my Sprint OG!
Click to expand...
Click to collapse
I tried to remove it. But its glued to the back of the screen. Didn't want to mess up the battery. LOL.
Sent from my LG Optimus G using xda premium
I read somewhere that with a little ingenuity and a soldering iron you could essentially make the OG compatible. Having never soldered anything in my life I ignored it, but try googling that if you feel capable of doing something like this.
I wonder how easy it would be to install the Palm Pre's touchstone coil in this phone, or if it's possible to install the Qi charging coil from an N4.....
I was wondering the same thing. I looked in the service manual and it seems that the same 2 powerpoints are on the Samsung Galaxy S 3 are also on this device. Can anyone confirm that these 2 points to the right of the battery are for charging contacts?
Sent from my LG-LS970 using xda app-developers app
I have a couple of touchstones around somewhere. My biggest fear for this mod would be the pressure from coil pushing on the inside of the glass back.
Sent from my LG-LS970 using xda app-developers app
http://wireless-charger-review.toptenreviews.com/duracell-mygrid-details.html
So I know this isn't exactly what you guys want, but it may be worth a shot.
arhoover said:
I was wondering the same thing. I looked in the service manual and it seems that the same 2 powerpoints are on the Samsung Galaxy S 3 are also on this device. Can anyone confirm that these 2 points to the right of the battery are for charging contacts?
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
Are you talking about under the battery door? If so those are for NFC
Sent from my LG-LS970 using Tapatalk 2
Ahh... Too bad.
Sent from my LG-LS970 using xda app-developers app
hey i got wireless charging working with the touchstone and the pixi back cover, if you want to know how just jump to the other thread on wireless charging for a second thanks
Feelin like a boss, have an extended battery cover... I don't like the idea of prying apart my GalNex though...
Could I wire the inductive coil to the battery directly? Like stuck them between the battery and phone contact pins? Not a good, sturdy solution, but I just don't like the idea of phone disassembly...
I also thought of making an inductive case that connects to the Pogo pins externally....
thoughts?
Sent from my Galaxy Nexus using xda app-developers app
I think some people have done the inductive case before; it shouldn't be too difficult. That said, I don't think attaching it to the battery is a good idea.
For what its worth, the disassembly for this mod was not hard. Just take it slow -- you don't actually have to start undoing ribbon cables and the like for this one, you can do all the parts with copper tape (until you solder the tape to the coil, but that doesn't touch your phone.)
Curious about this. Let us know what you do.
Keep me updated, sounds awesomenessesseesssss
Sent from my Galaxy Nexus using Tapatalk 2
I would love a case like that
Sent from my Galaxy Nexus using Tapatalk 2
jimmyco2008 said:
Could I wire the inductive coil to the battery directly?
Click to expand...
Click to collapse
You could but you shouldn't. That would bypass the battery charging protection circuit.
Sent from my SGH-T889 using xda app-developers app
I have an (expensive :/) Incipio two-layer case... Thinking maybe I could put the coil and magnets in between the silicone inner layer and hard shell outer layer...
I'm open to suggestions, I'm a little uncertain about getting the wires to line up with the pogo pins...
Sent from my Galaxy Nexus using xda app-developers app
I just don't like the idea of taking my phone partially apart... This is a guy who takes just about everything else apart, but I feel like phones are particularly fragile, you say be careful, I say I can't upgrade if this one bites the dust.
In the end though, I don't *need* inductive charging.
Sent from my Galaxy Nexus using xda app-developers app
I started a mod like this on an iPhone 4 that would no longer charge. I was going to have to wire directly to the battery and that was a concern. If I had another good coil and charger, I would certainly give it a go. I've taken many phones apart and never have issues. Were you using the coil from a Palm device?
Sent from my Galaxy Nexus using Tapatalk 2
I haven't actually done anything with it, but I have the Palm Touchstone setup, coil and all.
Sent from my Galaxy Nexus using xda app-developers app
That's what I was figuring. The mod I did was using one of those external battery power pack deals that worked with the energizer pads. I had to rip it apart for the coil but could still use as an external battery charger through the USB ports. I just don't have the pad to test my work. Ugh.
Sent from my Galaxy Nexus using Tapatalk 2
Oh that's a good idea, get an external battery case... Generally that's an iPhone-only ordeal.
Is it for Touchstone or Qi? Apparently the two are incompatible.
Sent from my Galaxy Nexus using xda app-developers app
Well, the case would have been the easier solution but it would no longer charge through the port so a hard mod straight to the battery was necessary. What I used was just a rechargeable external battery with wireless charging that had a micro USB cable to plug into phones and also a micro USB port to recharge while away from the power pad. I didn't have the pad so the coil wasn't important to me. I just hardwired straight to the battery but don't have a pad to make sure it's working. I just reassembled the battery and can still use it as I always have with cables. I only bought it for emergencies for times away from outlets. It was an energizer battery pack.
Sent from my Galaxy Nexus using Tapatalk 2
I tried 3 cables and two charging blocks and it charges slow. I downloaded a battery monitor app and it says it's charging via USB port even though its connected to the wall outlet. What can I do to fix this? it just barely started.
Sent from my SGH-T889 using Tapatalk 4
horr1blek1tten said:
I tried 3 cables and two charging blocks and it charges slow. I downloaded a battery monitor app and it says it's charging via USB port even though its connected to the wall outlet. What can I do to fix this? it just barely started.
Sent from my SGH-T889 using Tapatalk 4
Click to expand...
Click to collapse
What chargers are you using? Are they set up for Iphone charging?
Hastily spouted for your befuddlement
All the one I'm using came with the phone.
Sent from my SGH-T889 using Tapatalk 4
My stock wall charger slowed down significantly after about 4 months of use. Now it only puts out about 400-500ma tops. It used to put out roughly 1700ma when new.
I have an old HTC mt4gs charger that is rated for 1 amp. It consistently puts out 1200-1350ma when charging the phone from below about 50%. I prefer that charger for most of my charging in a hurry.
Hastily spouted for your befuddlement
I have two note 2 chargers and they both are doing this . I have to keep unplugging and plugging it in to get it to recognize that's its a wall outlet
Sent from my SGH-T889 using Tapatalk 4
horr1blek1tten said:
I have two note 2 chargers and they both are doing this . I have to keep unplugging and plugging it in to get it to recognize that's its a wall outlet
Sent from my SGH-T889 using Tapatalk 4
Click to expand...
Click to collapse
Have the same problem and cant figure out. My solution is im using neak kernel which allows you to increase charging current which actually helped. It charges a lot faster. Is it taking you about six hours to fully charge?
Sent from my SGH-T889 using Tapatalk 4
Yes maybe longer
Sent from my SGH-T889 using Tapatalk 4
horr1blek1tten said:
Yes maybe longer
Sent from my SGH-T889 using Tapatalk 4
Click to expand...
Click to collapse
Not sure what rom ur using but neak and devil kernels allow u to change the charging rate. I had the same issue with my chargers. Not an issue anymore.
Sent from my Note 2's big ass screen
I'm fully stock
Sent from my SGH-T889 using Tapatalk 4
horr1blek1tten said:
I'm fully stock
Sent from my SGH-T889 using Tapatalk 4
Click to expand...
Click to collapse
Only options would be to use a rooted stock rom and flash one of those kernels or buy a new charger.
Sent from my Note 2's big ass screen
Prolly have to replace the phone ice used two chargers
Sent from my SGH-T889 using Tapatalk 4
horr1blek1tten said:
Prolly have to replace the phone ice used two chargers
Sent from my SGH-T889 using Tapatalk 4
Click to expand...
Click to collapse
The usb port is on its own pcb and only 8 bucks to order. My s2 said it was charging when it wasn't, unless I held the wire at extreme angles. It had pins loose
http://pages.ebay.com/link/?nav=item.view&id=121164011528
Sent from my SGH-T889 using xda app-developers app
pyraxiate said:
The usb port is on its own pcb and only 8 bucks to order. My s2 said it was charging when it wasn't, unless I held the wire at extreme angles. It had pins loose
http://pages.ebay.com/link/?nav=item.view&id=121164011528
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Thanks for this nice to know. It's an easy fix some it is on its own pcb
Sent from my SGH-T889 using Tapatalk 4
sorry for some reason i can't use the quick reply.
i have found my issue of slow charging to be resolved by using a shorter usb cable. i was using the stock one and it seemed to slow down a lot after a few months. i tried the usb cord my wife uses, which is like 6ft long and it seemed to not charge at all. i then bought a short, 1ft monster usb cable and it charges so much faster. even faster than the stock usb cable
and rednewor
I've noticed that the shorter cables tend to wear out less rapidly as well. Wonder if it has something to do with there being less...well, cable...to get worn down from movement or whatnot. We used to go through our charging cables relatively rapidly, in just a few months, until we moved to short ones.
My last string longcord, though, hasn't been moved from its home since the first time it was plugged in, and is going on about 5 months without hassle.
I've got the wireless charging battery cover from Verizon on my phone. It makes the phone a bit thicker. I was wondering if there were any cases out there that can accommodate the extra size. I currently use a Cruzerlite case that I cut a little bit to allow expansion but I'd like something a bit cleaner.
TIA for any input!
Sent from my Galaxy S3 using Tapatalk 4
You can get wireless charging inlays that fit inside the original battery lid and as such don't increase the thickness of the device
Interesting, never heard of that. Do you have a link?
Sent from my Galaxy S3 using Tapatalk 4
my95z34 said:
Interesting, never heard of that. Do you have a link?
Sent from my Galaxy S3 using Tapatalk 4
Click to expand...
Click to collapse
They're practically impossible to miss, just search ebay or any number of other places for "s3 qi inlay"
Has anyone experienced any issues with the inlays? I just got a wireless qi charger and the Verizon rear case for the phone and have just been putting up with the added thickness. I wouldn't mind considering the inlays though.
Sent from my SCH-I535 using XDA Premium 4 mobile app
They make it a bit thicker and bow the back out very slightly.
To those who currently have a qi wireless charger. Few questions as I'm about to get one.. Does the charging pad get warm? Is it ok to keep plugged in or could it be a possible fire hazard? Stupid question, I know, but I have a hard time trusting cheap stuff from china, lol. Does wireless charging charge as fast as USB? Thanks!
Sent from my SGH-T999 using xda app-developers app
MiG8GT said:
To those who currently have a qi wireless charger. Few questions as I'm about to get one.. Does the charging pad get warm? Is it ok to keep plugged in or could it be a possible fire hazard? Stupid question, I know, but I have a hard time trusting cheap stuff from china, lol. Does wireless charging charge as fast as USB? Thanks!
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Occasionally. Yes it's fine. And it depends on the pad and the receiver on your phone. Mine is 650mA so it's slightly faster than USB
Sent from my Galaxy S3 using Tapatalk 4
Thanks! I'll order one tonight, can't wait to get it!
Sent from my SGH-T999 using xda app-developers app
MiG8GT said:
Thanks! I'll order one tonight, can't wait to get it!
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I wouldn't skimp on the stuff tho. I spent like $50 for my charging pad. Its got two spots and it's made by Energizer.
Sent from my Galaxy S3 using Tapatalk 4
the pad can get warm but it's fine.
it's not going to blow up or anything.
you can also keep an eye out for the dt500 charging pad that nokia has for the lunia series. they go on sale often for $25.
Sent from my GT-I9300 using xda app-developers app
MiG8GT said:
To those who currently have a qi wireless charger. Few questions as I'm about to get one.. Does the charging pad get warm? Is it ok to keep plugged in or could it be a possible fire hazard?
Click to expand...
Click to collapse
1. Slightly warm when in use.
2. Yes, it's fine to leave it plugged in. My one at my office desk sits on top of a pile of papers and hasn't set anything on fire yet.
I personally own this receiver (which I use with this pad, though my pads are black rather than white), which works well though my lifeproof case. No dice with the Otterbox Armour case though.
I'd recommend avoiding this charger. It doesn't work worth a damn through a case and constantly connects/disconnects.
I have the same receiver inlay as compo01, using it with a variety of pads, including an official Samsung S4 one that I modded into an ugly but functionally awesome dock
MiG8GT said:
To those who currently have a qi wireless charger. Few questions as I'm about to get one.. Does the charging pad get warm? Is it ok to keep plugged in or could it be a possible fire hazard? Stupid question, I know, but I have a hard time trusting cheap stuff from china, lol. Does wireless charging charge as fast as USB? Thanks!
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I have the ghost charger that they sell at Verizon. I woke up this morning and my phone showed 116 F. Is that super hot for a phone?
Sent from my SCH-I535 using XDA Premium 4 mobile app
I should add I'm running CM 10.1 latest stable build.
seems unnaturally hot... is there any metal in between your phone and the charger?
Sent from my GT-I9300 using xda app-developers app
tomster2300 said:
I have the ghost charger that they sell at Verizon. I woke up this morning and my phone showed 116 F. Is that super hot for a phone?
Sent from my SCH-I535 using XDA Premium 4 mobile app
I should add I'm running CM 10.1 latest stable build.
Click to expand...
Click to collapse
Yeah, that's really hot. The highest I've ever seen when charging is 36c (96.8f).
Sent from my Galaxy S3 i747m
mputtr said:
seems unnaturally hot... is there any metal in between your phone and the charger?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I have a thin rubber case that goes around the back and sides. I took it off the charger this morning and it was at 100 F.
Sent from my SCH-I535 using XDA Premium 4 mobile app
tomster2300 said:
I have a thin rubber case that goes around the back and sides. I took it off the charger this morning and it was at 100 F.
Sent from my SCH-I535 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
my phone gets warm during the initial charging but once it hits 100% it cools down real fast. I can think of only one other thing in this case.. you might not be aligned correctly.. but i would not think that's the case since you seem to be able to get to 100% with no problem...
I have the Verizon and the monster watts WiQiQi kit. I mainly use the Verizon back cover even though it means I can't put a case on. The WiQiQi is a nice kit but when I use it with my preferred case, one with a stand , The screen distorts and bulges. But I put the WiQiQi in my fathers phone with an otterbox and he has no issues.