Related
Actually, I really dont know how to describe such case.
Since there many holes on the back and might be help for to cool down GN.
So I just call it air cooling case.
There're also other kind of case with holes on ebay and taobao. But they are
too rough and too ugly. Usually cost around 3RMB,but u won't want to put it
on your GN which might scratch ur GN.
I bought this one around 10USD. And the color is green with little bit metal
feeling.
The only disadvantage is: It won't fit with 2000mah battery. So u can only use
1750mah battery with it.
looks nice. could you post a link?
Link please
here it is.
http://item.taobao.com/item.htm?id=16457320483
Found it
http://www.ebay.com/itm/GENUINE-SAM..._MobilePhonesCasesPouches&hash=item3a74838c1a
Very nice looking mesh case and didn't know they made them. If you're worried about heat i would just undervolt the nexus. But this definitely gives it a unique look.
Sent from my Galaxy Nexus using XDA
http://www.ebay.com/itm/GENUINE-SAM...-LOOK-COOL-MESH-VENT-CASE-COVER-/251062880001
Black one looks great! Might pick one up... Kinda pricey for a generic though.
Seems cheaper from the company: http://www.anymode.com/shop/goods/goods_view.php?goodsno=12347476
But I don't read Korean enough/at all to figure out if they ship to Canada or how to checkout.
Anymode cannot be considered generic
"Anymode, a privately held company founded in Korea in 2007, has the strong affiliation with Samsung Electronics for key accessories supplier globally."
---------- Post added at 09:09 AM ---------- Previous post was at 09:07 AM ----------
Also is it just me or did anyone else notice it does not have an opening for the Pogo pins?
Point taken. Now find it for me somewhere that's cheap
osm0sis said:
Point taken. Now find it for me somewhere that's cheap
Click to expand...
Click to collapse
Plenty of cheap ones.
These are called "Mesh snap on" cases.
Here's for the GSM Nexus: http://www.ebay.com/sch/i.html?_trksid=p5197.m570.l1313&_nkw=i9250+mesh&_sacat=0
$1.92
There's no "snap on mesh" cases for the Verizon, they're more fully formed so it's not cheap.
$7-$9 http://www.ebay.com/sch/i.html?_nkw=i515+mesh&_sacat=0&_odkw=i9250+mesh&_osacat=0
Those are the cheap feeling ones the OP described. I was asking for a link to a cheaper site for the Anymode version the OP recommended. Thanks though!
99.9% anti-bacterial
Nice!
this is not going to cool your phone, you are adding another layer of plastic to trap heat. do you cool yourself by wearing a sweater?
neotekz said:
this is not going to cool your phone, you are adding another layer of plastic to trap heat. do you cool yourself by wearing a sweater?
Click to expand...
Click to collapse
The "air cooling" is just a term to describe this case. Just a comparison
between other TPU or silicon case.
Of course no case is the coolest!
osm0sis said:
Those are the cheap feeling ones the OP described. I was asking for a link to a cheaper site for the Anymode version the OP recommended. Thanks though!
Click to expand...
Click to collapse
Like I post in the beginning. I got it from Taobao,which is the cheapest source.
Look a little like nillkin hard case, I have the one with brown color with around 7$
http://www.casesss.com/product.aspx?model=62&pid=337
Saintfyre said:
99.9% anti-bacterial
Nice!
Click to expand...
Click to collapse
Where do you see this?
Anymode Galaxy Nexus Cool Case
frigidazzi said:
Where do you see this?
Click to expand...
Click to collapse
Right there on the box!
Great case! I ended up getting it from eBay since I can't read Korean/Chinese nor trust signing up with credit card info to foreign websites I don't understand. Nice matte finish on the black one here. Feels solid, snug and good in the hand. The wrap-around to the front leaves just enough of a gap between housing and screen that edge-to-edge screen protectors should work nicely. And the design and materials seem excellent for signal, WiFi and NFC (unlike my last case)! Would definitely buy again.
Very, very pleased... now I just need my Fantom tempered glass screen protector:
http://rootzwiki.com/topic/25298-ho...erested-in-a-tempered-glass-screen-protector/
nxt said:
There's no "snap on mesh" cases for the Verizon, they're more fully formed so it's not cheap.
$7-$9 http://www.ebay.com/sch/i.html?_nkw=i515+mesh&_sacat=0&_odkw=i9250+mesh&_osacat=0
Click to expand...
Click to collapse
Those ones don't really count. The pictures show a full case with the snap on mesh that goes over it. So the mesh on those cases is just for looks.
My issue with these mesh cases is that dust collects in the holes REALLY easily. :\
So I've been looking for a TPU bumper for a while, and all I've seen are normal cases which have a back. I'm looking for one thats just a bumper and without a back. currently i have an aluminum bumper on my OPO but i dont like it much because of the sharp corners and slipperiness.
Anyone know of any tpu bumpers out there?
bumper!
I've been looking for a bumper like I had on my Moto X. Haven't found one yet. Only the aluminum bumper.
http://www.ebay.com/itm/New-Hybrid-...t=LH_DefaultDomain_0&var=&hash=item19e734f0ba
JJHunterx said:
I've been looking for a bumper like I had on my Moto X. Haven't found one yet. Only the aluminum bumper.
http://www.ebay.com/itm/New-Hybrid-...t=LH_DefaultDomain_0&var=&hash=item19e734f0ba
Click to expand...
Click to collapse
yea i would love something like this. cant find anything
nuwan32 said:
yea i would love something like this. cant find anything
Click to expand...
Click to collapse
Closest thing I could find: http://www.ebay.com.au/itm/Orzly-Fu...97?pt=LH_DefaultDomain_15&hash=item3cef188cd1
Bought it for mine and got it last week, it works pretty well. Already dropped it once and no marks
GalaxyWhy said:
Closest thing I could find: http://www.ebay.com.au/itm/Orzly-Fu...97?pt=LH_DefaultDomain_15&hash=item3cef188cd1
Bought it for mine and got it last week, it works pretty well. Already dropped it once and no marks
Click to expand...
Click to collapse
this isnt a bumper though. its a case with a clear back. plus according to reviews, theres a gap between the lip and the bezel of the device which doesnt look that great, and the back clear plastic scratches really easily :/
nuwan32 said:
this isnt a bumper though. its a case with a clear back. plus according to reviews, theres a gap between the lip and the bezel of the device which doesnt look that great, and the back clear plastic scratches really easily :/
Click to expand...
Click to collapse
I know its not a true bumper im saying its the closest thing we got lol
I think there are no TPU bumpers available because they do not hold to the edge without slipping often. Just imagine you put a rubber band around the edge of the phone and taking it in and out of your pocket.
aerosmith said:
I think there are no TPU bumpers available because they do not hold to the edge without slipping often. Just imagine you put a rubber band around the edge of the phone and taking it in and out of your pocket.
Click to expand...
Click to collapse
this is unfortunate. i think it is possible to make one though. the nexus 4 has a bumper and its completely round lol. plus rhinoshield had a model for it, they just never went through with making it.
I have been looking for one as well. I thought about getting that Orzly Fusion mentioned earlier in the thread and seeing if I could separate the back from it. I love the feel of my sandstone back, and don't want to cover it.
Looks like that might work. I think if you used a dremel cutting wheel and left a little of the clear lip around the back it might work really well.
bradleyw801 said:
I have been looking for one as well. I thought about getting that Orzly Fusion mentioned earlier in the thread and seeing if I could separate the back from it. I love the feel of my sandstone back, and don't want to cover it.
Click to expand...
Click to collapse
I have one and you should be able to do that, however, it does seem like the back would be loose which means you might have to either cut the plastic from the outer edge which can be a hard job and leave some plastic left on the inside to cover the slack or fill in the slack with something else, either way it is achievable but you do risk losing £10
Here is the only bumper I've found so far : http://id.aliexpress.com/item/2014-...luminum-Metal-Hard-Thin-Slim/32234240942.html
3RR0R404 said:
Here is the only bumper I've found so far : http://id.aliexpress.com/item/2014-...luminum-Metal-Hard-Thin-Slim/32234240942.html
Click to expand...
Click to collapse
this is an aluminum bumper and its the one i have right now :/
any updates to this situation?
hogze94 said:
any updates to this situation?
Click to expand...
Click to collapse
I don't think anything exists that is a bumper case that isn't made out of some kind of metal.
There are quite a few metal bumper case for OPO on Ebay and and Indian Ecommerce site flipkart, but I don't want a metal one.
arjunpaliath said:
There are quite a few metal bumper case for OPO on Ebay and and Indian Ecommerce site flipkart, but I don't want a metal one.
Click to expand...
Click to collapse
yea and those ones are all the same.
i found the pros and cons of oneplus one bumper please check it out should i buy it or not
https://www.youtube.com/watch?v=I0z2SOBbams
ngupta93 said:
i found the pros and cons of oneplus one bumper please check it out should i buy it or not
https://www.youtube.com/watch?v=I0z2SOBbams
Click to expand...
Click to collapse
Stop spamming your video
Last three threads I've read you have posted your video
Sent from my Oneplus One using XDA Free mobile app
Mod Edit links removed
Do you have them. can you give us your felling about the "9H Tempered Glass Film Screen Protector"?
Hello, I'm still not have 9H Tempered Glass Film Screen, it's on the way, so i couldn't give your my feeling of that. while i got it, i will post it. certainly, compared with the original/official tempered glass screen, this one isn't good. but it's not bad, and price cheap, i just think it needn't cost too much on screen protector, this one is a good choice.
JerryPaul said:
Hello, I'm still not have 9H Tempered Glass Film Screen, it's on the way, so i couldn't give your my feeling of that. while i got it, i will post it. certainly, compared with the original/official tempered glass screen, this one isn't good. but it's not bad, and price cheap, i just think it needn't cost too much on screen protector, this one is a good choice.
Click to expand...
Click to collapse
I Have to agree with you so I ordered one plus the tough case and a silicon case too.
Please let us know how those turn out. Oneplus isn't stocking the accessories fast enough.
ceebs69 said:
I Have to agree with you so I ordered one plus the tough case and a silicon case too.
Click to expand...
Click to collapse
Thx, good luck.
Kerafyrm said:
Please let us know how those turn out. Oneplus isn't stocking the accessories fast enough.
Click to expand...
Click to collapse
Hello, some one are made by the 3rd factory, so it's not marked the official/original, and the price is cheap.
I've got the official silicone case but it's really big :/
PoloB49 said:
I've got the official silicone case but it's really big :/
Click to expand...
Click to collapse
could you share your official silicone case, let us have a look how about your silicone case.
JerryPaul said:
could you share your official silicone case, let us have a look how about your silicone case.
Click to expand...
Click to collapse
Here you are
I got it free for buying the phone on day one at Paris
PoloB49 said:
Here you are
I got it free for buying the phone on day one at Paris
Click to expand...
Click to collapse
thx for share, it looks nice, a nice phone, and nice case. how about the touch feeling.
JerryPaul said:
thx for share, it looks nice, a nice phone, and nice case. how about the touch feeling.
Click to expand...
Click to collapse
Nice to touch, really. But it grips a lot, it's difficult to put the phone into my pocket x)
The phone does not slide anymore
PoloB49 said:
Nice to touch, really. But it grips a lot, it's difficult to put the phone into my pocket x)
The phone does not slide anymore
Click to expand...
Click to collapse
That's nice for no slide, sometimes, phone damaged due to slide from hand. yes, it looks a little big，you may need a big pocket; I'm prefer bamboo wood style case.
PoloB49 said:
Here you are
I got it free for buying the phone on day one at Paris
Click to expand...
Click to collapse
Lucky You.....
Received mine yesterday, the silicone shipped with is transparent. The additionnal one i ordered on OP store is smaller.
Graveen said:
Received mine yesterday, the silicone shipped with is transparent. The additionnal one i ordered on OP store is smaller.
Click to expand...
Click to collapse
would share your OPX case, you buy it from OP official store?
JerryPaul said:
would share your OPX case, you buy it from OP official store?
Click to expand...
Click to collapse
Yes, here is a picture of both side by side, with opx
I still hesitate which one i should use daily:
- the bundled one is letting you see the metal edges of the phone, but is not gripped (so it can slide easily from your hands)
- the bought one is gripped on the rear, thinner, but hiding the edges of the phone
PoloB49 said:
Here you are
I got it free for buying the phone on day one at Paris
Click to expand...
Click to collapse
but from your picture,it looks really solid
---------- Post added at 09:53 AM ---------- Previous post was at 09:52 AM ----------
Graveen said:
Yes, here is a picture of both side by side, with opx
I still hesitate which one i should use daily:
- the bundled one is letting you see the metal edges of the phone, but is not gripped (so it can slide easily from your hands)
- the bought one is gripped on the rear, thinner, but hiding the edges of the phone
Click to expand...
Click to collapse
for me i think the TPU case is much more comfortable
Graveen said:
Yes, here is a picture of both side by side, with opx
I still hesitate which one i should use daily:
- the bundled one is letting you see the metal edges of the phone, but is not gripped (so it can slide easily from your hands)
- the bought one is gripped on the rear, thinner, but hiding the edges of the phone
Click to expand...
Click to collapse
it is a happy trouble, those two cases both looks nice; for me, i would prefer the transparent case, let the phone not heavy.
Honestly i would have known a bumper was provided - perhaps it was explicitely mentionned and i didn't read carefully the package description -, i'd not have bought a new one
Looking for a good Bumper case
to show off the Sicks skin on my moto g5 plus
Anyone???
Ordering this one right now. I really like the design. Although I'll be ordering the tempered glass with it.
https://www.zizowireless.com/collec...tested-built-in-kickstand?variant=39517199630
OldHemp said:
Ordering this one right now. I really like the design. Although I'll be ordering the tempered glass with it.
https://www.zizowireless.com/collec...tested-built-in-kickstand?variant=39517199630
Click to expand...
Click to collapse
Thats not a bumper
Bumper just covers the border of phone
OldHemp said:
Ordering this one right now. I really like the design. Although I'll be ordering the tempered glass with it.
https://www.zizowireless.com/collec...tested-built-in-kickstand?variant=39517199630
Click to expand...
Click to collapse
That looks fuking dope bro
---------- Post added at 06:39 PM ---------- Previous post was at 06:38 PM ----------
I guess there no bumper case in the market
I'm looking for a bumper case to show off my skin as well, but I haven't had much luck in finding one. I'm going to keep looking around online, but if anyone knows where to get a bumper case like this, please share!
Settled on this one because no major manufacturers have put one out for the device yet.
https://www.amazon.com/gp/aw/d/B06X...+plus+case&dpPl=1&dpID=515F3L0nP0L&ref=plSrch
arhncmh said:
Settled on this one because no major manufacturers have put one out for the device yet.
Click to expand...
Click to collapse
Looks nice, I might have to pick this one up too. It's not my ideal case, but at least it'll keep my phone protected until I can find a bumper.
arhncmh said:
Settled on this one because no major manufacturers have put one out for the device yet.
https://www.amazon.com/gp/aw/d/B06X...+plus+case&dpPl=1&dpID=515F3L0nP0L&ref=plSrch
Click to expand...
Click to collapse
I like this one as well. Very nice.
XjmcDA said:
Looks nice, I might have to pick this one up too. It's not my ideal case, but at least it'll keep my phone protected until I can find a bumper.
Click to expand...
Click to collapse
Upstate: Received on Sunday from Amazon. I'm happy with this case. It does what I wanted, which was protect the front and rear glass areas from contacting surfaces when I put the device down. The raised rubberized black lines keep the phone up away from the clear cover. The holes in the clear cover for USB, mic, stereo jack (bottom), and whatever the tiny hole next to the camera is on the back all line up perfectly. I like the bumpers on the corners too. Hopefully I won't have reason to test them, but they look capable. :good:
Okay so now I'm pissed because my fave case manufacturer UAG came out with a new model for my phone just days after I settled on something less.
https://www.amazon.com/gp/aw/d/B06X...G5PLS-O-BK&dpPl=1&dpID=51wzgi0Kk2L&ref=plSrch
Yeah not a bumper case but since I replied to this thread I figured it was the best place to whine about it.
arhncmh said:
Settled on this one because no major manufacturers have put one out for the device yet.
Click to expand...
Click to collapse
I also picked up this case. It is quite good, nice and slim with solid side grips. Having a clear back allows my Skinnova skin to show through which is cool. It fits tightly around the phone and feels quite sturdy. I'd definitely recommend this if you're looking for something close to a bumper case. I think this might be as close as we're going to get for this device.
i didnt receive my g5+ yet but i found this and i think it looks awesome.
https://www.shapeways.com/product/4ULTTKGA2/moto-g5-plus-bumper-low-profile?optionId=63269253
Wow, you found one! This might be the very first bumper case for the Moto G5 Plus. I think I might order it and see how it looks.
XjmcDA said:
Wow, you found one! This might be the very first bumper case for the Moto G5 Plus. I think I might order it and see how it looks.
Click to expand...
Click to collapse
let us know!
Ch3micalGnetics said:
let us know!
Click to expand...
Click to collapse
Will do! I just ordered it yesterday, the total came out to around $20 USD. It looks like they 3D print the cases individually, so it won't be shipping out until Aug 31st.
I just got the bumper case from Shapeways today. First impressions - it's just ok, nothing spectacular. It feels like a $5 -10 bumper case, not a $20 one. The fit is a bit loose and not as sung as I would like. The grip is really solid though, and I like the texture. Overall I would say this bumper case isn't worth the money. But if you REALLY want a slim case, I would say go for it. I'm not sure if we'll ever get a different bumper case for this phone, so this might be your only option (at least right now).
XjmcDA said:
I just got the bumper case from Shapeways today. First impressions - it's just ok, nothing spectacular. It feels like a $5 -10 bumper case, not a $20 one. The fit is a bit loose and not as sung as I would like. The grip is really solid though, and I like the texture. Overall I would say this bumper case isn't worth the money. But if you REALLY want a slim case, I would say go for it. I'm not sure if we'll ever get a different bumper case for this phone, so this might be your only option (at least right now).
Click to expand...
Click to collapse
thanks for the update man. Already ordered mine. Do you have pics to show us?
Ch3micalGnetics said:
thanks for the update man. Already ordered mine. Do you have pics to show us?
Click to expand...
Click to collapse
I would if I could, but I don't think I can post links yet (not enough posts).
XjmcDA said:
I would if I could, but I don't think I can post links yet (not enough posts).
Click to expand...
Click to collapse
Pm them to me if you can...I will post
here's a back cover that looks awesome on this phone
it's actually a metal frame with vinyl back cover
" https://www.amazon.in/D-kandy-Luxury-Bumper-Acrylic-Motorola/dp/B071L941SV/ref=nav_ya_signin?s=electronics&ie=UTF8&qid=1506886841&sr=1-6&keywords=moto+g5+plus+metal+cases+and+covers& "
it's available in India, so do see if they ship to your place.
also same covers are available on alibaba.com and aliexpress and they ship globally
Just received some of the Clear X-Level TPU case I found and ordered, it is .78mm with clear matte edges all around that feel great in hand.
https://photos.app.goo.gl/YNDccnTmGaIv250z1
The case is similar to the 'MNML' case in that it does not provide a lip for the screen, but it does hug the screens curves to provide a bit more protection in case of accidental drops since it is made of TPU. Dont get me wrong, it is not not a drop proof case at all, but even thin TPU material can absorb more of an impact than hard plastic, and with a good screen protector you're set. The camera is also ever so recessed enough that it wont hit flat surfaces when placed on them. The buttons are also feel great and tactile.
The only thing that may bother some, but doesn't bother me since it isnt that noticeable from afar, is that even though it has the "dot buffer" most clear tpu cases have, it still shows some "water markings" where the case meets the back glass. This is likely because of how thin the case is, and how the back glass curves and melts into the 2 XL's corners. The case will also likely yellow and scratch over time, but that is why I got a small supply lol. I'll be able to swap them out as needed since it will be my daily for a while.
(On a side note) If anyone is interested I would also be wiling to sell some of the extra I have. I know it sounds like an ad for me to sell... but I just feel I got more than I needed.. and it seems these are hard to get in the US for some reason. So if you are just let me know, id do $12 shipped, first class, US. If you want more than one Id do a deal cause of shipping as well! If I have more than one left i want to sell that is lol
I find matte finish slippery and like the cheap TPU L&K case on Amazon much better. They don't get much smaller than L&K.
scottjal said:
I find matte finish slippery and like the cheap TPU L&K case on Amazon much better. They don't get much smaller than L&K.
Click to expand...
Click to collapse
It actually does. The L&K is about as thick as the Ringke Bevel. I had the "Pleson" version of it (theyre both the same just rebranded) and that is how thick it felt. The X-Level is .78mm thin.
Have a link for where you got it?
Sent from my iPhone using Tapatalk
zaydaboss said:
Have a link for where you got it?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
I don't, a buddy bought a small lot from gearbest I think. That's why I have more extras than I need.
Nocturnal86 said:
I don't, a buddy bought a small lot from gearbest I think. That's why I have more extras than I need.
Click to expand...
Click to collapse
Check your PayPal
zaydaboss said:
Check your PayPal
Click to expand...
Click to collapse
Check your PM's, need your address
Nocturnal86 said:
Check your PM's, need your address
Click to expand...
Click to collapse
Loving this case. Was concerned it would crack like the mnml ones it's tpu so that won't be a issue this will keep me from going commando I hate cases
You have a spare case to sell me?
rfuser said:
You have a spare case to sell me?
Click to expand...
Click to collapse
Just saw this, sent you a PM
What about sending one up north to Canada, eh?
evanwier said:
What about sending one up north to Canada, eh?
Click to expand...
Click to collapse
If you pay for shipping along with the case lol
eBay got the hook-up: https://www.ebay.com/itm/X-Level-Pu...-Slim-Armor-Clear-Soft-TPU-Cover/222698641914
It took 23 days to reach me in Los Angeles from China.
Just got mine yesterday and I love it. I've been on the hunt for a good clear case to show off the phone. I first had the Spigen Liquid Crystal but it added a bit too much bulk for my liking. This one is just thick enough to protect the rear camera lens when the device is resting face-up. My only complaints are that:
1. there is no lip to protect the screen if I want to set the phone face-down (seems to be common amongst slim cases), and
2. the cut-outs are a bit sharp from being unfinished (though really this is not a big deal for me).
The fingerprint reader cut-out is a bit off-center but at a glance it isn't noticeable for me.
Unfortunately after some time (2 weeks) case has weird bluish discoloration.
I'm assuming this came from holding my phone in pocket (jeans).
I have also Ringke clear case and same story, same discoloration.
been using this for more than half year, same as other tpu case, it will turn yellow as time goes by.