Develop Bugs

[Q] Help--May have bricked my phone

Checked other threads but didn't see anything like my problem
CWM recovery 6.0.14
Get msg saying can't open /cache /recovery /log. Won't perform any actions like restore or install zip.
Any ideas?

This will help. It will show you how to get your phone back to stock so you can leave it be or start over if you decide. Whatever you do, follow the directions to the T and you should be fine. Good Luck.

act586 said:
Checked other threads but didn't see anything like my problem
CWM recovery 6.0.14
Get msg saying can't open /cache /recovery /log. Won't perform any actions like restore or install zip.
Any ideas?
Click to expand...
Click to collapse
I have some problem with 6.0.1.4 too.. seems my phone is bricked. trying a restore and it is stuck at restoring cache. I was using 5.0.2.7 and installed a couple 4.0.4 roms with no issues. Was wanting to install CM10 and was told I should get 6.0.1.4 Everything is falling apart now.. Might be able to go back to 5.0.2.7 via odin?
---------- Post added at 02:03 PM ---------- Previous post was at 01:39 PM ----------
kalo93406 said:
I have some problem with 6.0.1.4 too.. seems my phone is bricked. trying a restore and it is stuck at restoring cache. I was using 5.0.2.7 and installed a couple 4.0.4 roms with no issues. Was wanting to install CM10 and was told I should get 6.0.1.4 Everything is falling apart now.. Might be able to go back to 5.0.2.7 via odin?
Click to expand...
Click to collapse
I just went back to 5.0.2.7 via odin and on reboot my last ROM is booting up.. It's like nothing has changed.. All of this is a bit sketchy as there is really no good info on how to do thing. Like upgrading from 5.0.2.7 CWM to 6.0.1.4.. why doesn't the CWM website give basic info on steps to use.
I also put ROM manager on my phone to see if that would update to 6.0.1.4 and it just seemed to get stuck.. so removed it
I tried putting 6.0 on from ODIN and that seemed to leave NO CWM on my phone at all.
Then was scared so tried flashing SGH-T989_TMB_1_T989UVKL1_CL799405_REV00.rar to restore my phone to original, and that didn't work. just stuck at startup screen.
Then I restored CWM 5.0.2.7 via odin.. thankfully it worked
Then I found a zip file for 6.0.1.4 so put that on my micro sd via and adapter on my computer. The installed it via 5.0.2.7. Thought I was set with 6.0.1.4 on my phone.. but then it didn't seem to work at all. Luckily could put 5.0.2.7 back on via odin and now Executioner 777 4.0.4 comes right up.
No idea what to do next.. or maybe do nothing as it is very hard to really know what is the best way. :s

6.0.1.4 has issues with our phone. 5.0.2.7 is fine with darkside scripts, twrp is good because you don't need the scripts.
Sent from my SGH-T989

link for twrp??
mintharis said:
6.0.1.4 has issues with our phone. 5.0.2.7 is fine with darkside scripts, twrp is good because you don't need the scripts.
Sent from my SGH-T989
Click to expand...
Click to collapse
I tried to download from the twrp website without success. Any idea where else I couldget it?
BTW, when I followed the instructions linked to in the second post, Odin sat there "initializing" for over 20 minutes before I aborted the process. I was able to flash cwm recovery without problems.
I'm stuck in a boot loop and need to do something. Tried flashing the stock ROM mentioned above without success via Odin.

You don't have to use twrp. Use CWM to get you out of your loop
Sent from my SAMSUNG-SGH-I717 using xda app-developers app

Can't run CWM
damastah said:
You don't have to use twrp. Use CWM to get you out of your loop
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
When I try to run CWM recovery the menu comes up then it immediately goes to a dark screen with just the tophat and yellow circle and "ClockworkMod Recovery v5.8.1.3" in white at the bottom of the screen.
Any ideas??

act586 said:
I tried to download from the twrp website without success. Any idea where else I couldget it?
BTW, when I followed the instructions linked to in the second post, Odin sat there "initializing" for over 20 minutes before I aborted the process. I was able to flash cwm recovery without problems.
I'm stuck in a boot loop and need to do something. Tried flashing the stock ROM mentioned above without success via Odin.
Click to expand...
Click to collapse
Try reinstalling drivers then rebooting your PC, then Odin
Sent from my SGH-T989 using xda premium

question about order of restoration
LoopDoGG79 said:
Try reinstalling drivers then rebooting your PC, then Odin
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
OK. I'm going to re-load the drivers on the PC and reboot. Then start Odin. Seeing as CWM isn't currently working, I'll load it thru Odin. Now Reboot the phone and see if CWM works. If yes, install the ROM from there. If not, can I install the ROM from Odin?

Issue flashing CWM recovery

Hey guys,
So I just rooted my rogers galaxy s3 and I'm trying to install CWM recovery. My phone isnt on the ROM manager list so I tried flashing it through odin. I've tried about 7 times each with different versions of cwm recovery and odin keeps saying it was a success but whenever I try to go into recovery mode I just go to android system recovery and not CWM recovery. I have no clue why this is happening.
Any ideas?
Thanks,
Zach

Zach23 said:
Hey guys,
So I just rooted my rogers galaxy s3 and I'm trying to install CWM recovery. My phone isnt on the ROM manager list so I tried flashing it through odin. I've tried about 7 times each with different versions of cwm recovery and odin keeps saying it was a success but whenever I try to go into recovery mode I just go to android system recovery and not CWM recovery. I have no clue why this is happening.
Any ideas?
Thanks,
Zach
Click to expand...
Click to collapse
Btw i dunno why its not working it worked for me.. but i switched cuz CWM SUCKS get twrp bruh its touch and everything and it tells you how much battery you have while flashing...
Download goomanager off playstore... download some random rom (you dont need to flash the rom its only so it gives u the link to the open recovery) you will be asked if you have a recovery installed say no install open recovery they install TWRP on your phone done.. happy flashing

Zach23 said:
Hey guys,
So I just rooted my rogers galaxy s3 and I'm trying to install CWM recovery. My phone isnt on the ROM manager list so I tried flashing it through odin. I've tried about 7 times each with different versions of cwm recovery and odin keeps saying it was a success but whenever I try to go into recovery mode I just go to android system recovery and not CWM recovery. I have no clue why this is happening.
Any ideas?
Thanks,
Zach
Click to expand...
Click to collapse
Had the same problems, follow this guide use the latest versions of everything (Odin, etc.). The key is the pulling of the battery after flashing and before you boot. Once I did that I got into CWM no problem.

amzi said:
Btw i dunno why its not working it worked for me.. but i switched cuz CWM SUCKS get twrp bruh its touch and everything and it tells you how much battery you have while flashing...
Download goomanager off playstore... download some random rom (you dont need to flash the rom its only so it gives u the link to the open recovery) you will be asked if you have a recovery installed say no install open recovery they install TWRP on your phone done.. happy flashing
Click to expand...
Click to collapse
Yeah I ended up installing TWRP, and I flashed this rom:
http://forum.xda-developers.com/showthread.php?t=1766684&highlight=gapps
Good so far!

This is probably the same issue i was having where the stock recovery kept coming back. You will need to rename or delete these two files.
/system/recovery-from-boot.p
/system/etc/install-recovery.sh

Zach23 said:
Yeah I ended up installing TWRP, and I flashed this rom:
http://forum.xda-developers.com/showthread.php?t=1766684&highlight=gapps
Good so far!
Click to expand...
Click to collapse
xD the thanks button is there for a reason

twrp getting stuck on team win boot img when i try to get to recovery

hey i just tried to change my recovery bc cwm got messed up with the whole cache not being able to wipe. so i went through goo manager and tried to install twrp it looked like it install right and when i go into recovery it get stuck on teamwin boot img and doesnt do anything. what should i do?

mightymike889 said:
hey i just tried to change my recovery bc cwm got messed up with the whole cache not being able to wipe. so i went through goo manager and tried to install twrp it looked like it install right and when i go into recovery it get stuck on teamwin boot img and doesnt do anything. what should i do?
Click to expand...
Click to collapse
Cwm 5.0.2.7 all day.
Sent from my SGH-T989 using xda app-developers app

I have exactly the same issue. I had problems trying to wipe cache on CWM 5 so I installed through Goo, now when I boot into recovery, it gets stuck on TEAMWIN screen.

files- images
make sure you have the file in the right place wwhen you know you do get the switcher and then down ld. the file again i had to trial and error it a few times :victory:

The newest twrp gets stuck for me too. I just flashed back to a cwm

noodles2224 said:
The newest twrp gets stuck for me too. I just flashed back to a cwm
Click to expand...
Click to collapse
Same issue here on the Telus T989D. Any solutions without using cwm?

You can always try the manual method if your brave and familiar with the terminal. Go to Team Win's for our phone here: http://teamw.in/project/twrp2/101. Download the .IMG file and follow the instructions under Download - Recovery Image Method (using dd): Not hard but doublecheck your typing before hitting enter or you'll brick your phone.
I'm not responsible for any actions taken because of this post. Good Luck, its worth it in the long run.
Sent from my SAMSUNG-SGH-T989 using xda premium

One small problem with that.....
Hi guys. I'm having a somewhat similar issue, but it's a little more problematic than that. I was in mid-flash when I unfortunately learned that any attempt to work with the cache resulted in an immediate freeze-up. From what little of the log I've seen, it's trying to tell me that the cache partition is read-only. Any attempt to unmount, wipe, or work with the cache in any way will result in an immediate lock up. This is *after* wiping the system and data partitions. I have been able to get TWRP to start correctly twice in the last 40 times I've tried to boot up the phone.
Question: I noticed that TWRP has a button where you can enter a terminal command. I don't have adb set up yet on this machine, since reloading it. I would imagine the answer would be 'no', but is it possible to put a different recovery image on the sd card, then use TWRP's terminal button to issue the command to flash it, or would that make matters worse? Or am I going to have to set up adb and odin again on another machine and use that? Any feedback would be greatly appreciated.
Side note: I should've stayed with CWM non-touch. :crying:

This worked for me:
reflash CWM, flash superwipe, install TWRP through goomanager.

i had the same problem on my t989 and this odin flashed version posted here worked fine
http://forum.xda-developers.com/showthread.php?t=1852753

dailo23 said:
i had the same problem on my t989 and this odin flashed version posted here worked fine
http://forum.xda-developers.com/showthread.php?t=1852753
Click to expand...
Click to collapse
I flashed that version through Odin and it seems to be running just fine. I wiped caches and now TWRP appears to be working normally :fingers-crossed:

mightymike889 said:
hey i just tried to change my recovery bc cwm got messed up with the whole cache not being able to wipe. so i went through goo manager and tried to install twrp it looked like it install right and when i go into recovery it get stuck on teamwin boot img and doesnt do anything. what should i do?
Click to expand...
Click to collapse
EDIT: Wow I guess I didnt read the critical part where your stuck on the recovery boot screen so the attachment below wont help.... JUMP DOWN TO POST #21 AND FOLLOW IT TO RECTIFY THE GETTING STUCK ISSUE
Here, try this file guys. Someone over in the Jedi threads made a CWM flashable TWRP zip. You can thank me for bringing it to your attention if you want, but I did not create this ( I just clicked on the attachment paperclip for the thread and browsed through all the attachments because I knew I saw it somewhere in the development section...)
I also checked TWRP's own website and for the Hercules, v.2.3.1.1 is the latest version supported for our device so far but I only found 2.3.0.0 packed in a recovery flashable form.
Just flash it via CWM like any other zip and once its done it'll reboot your device automatically to system, so just reboot it back to recovery to make sure it worked. It did for me when I did awhile back with v.2.2.2.0 and I just used the below file to flash and update it in TWRP to v.2.3.0.0
Hope it helps

incgnito said:
Hi guys. I'm having a somewhat similar issue, but it's a little more problematic than that. I was in mid-flash when I unfortunately learned that any attempt to work with the cache resulted in an immediate freeze-up. From what little of the log I've seen, it's trying to tell me that the cache partition is read-only. Any attempt to unmount, wipe, or work with the cache in any way will result in an immediate lock up. This is *after* wiping the system and data partitions. I have been able to get TWRP to start correctly twice in the last 40 times I've tried to boot up the phone.
Question: I noticed that TWRP has a button where you can enter a terminal command. I don't have adb set up yet on this machine, since reloading it. I would imagine the answer would be 'no', but is it possible to put a different recovery image on the sd card, then use TWRP's terminal button to issue the command to flash it, or would that make matters worse? Or am I going to have to set up adb and odin again on another machine and use that? Any feedback would be greatly appreciated.
Side note: I should've stayed with CWM non-touch. :crying:
Click to expand...
Click to collapse
i just started having this exact problem with the cache partition. it will freeze on me whenever i try to reformat it, i can't unmount it, etc. i also get stuck on the twrp "teamwin" blue start up screen. have you figured out a solution?
edit- got it working again.. ended up odin flashing twrp 2.2 and i was able to wipe everything and install the new rom stuff.

noodles2224 said:
The newest twrp gets stuck for me too. I just flashed back to a cwm
Click to expand...
Click to collapse
Will you kindly explain how you did this?

y0urm0msname said:
Will you kindly explain how you did this?
Click to expand...
Click to collapse
What exactly is your issue?

Eks Dee Aye said:
What exactly is your issue?
Click to expand...
Click to collapse
Same as OP. I have never re-flashed CWM. This was my first time trying TWRP. I am looking for instructions to either...
Re-flash CWM
Re-install a version to TWRP that works
Thanks!

y0urm0msname said:
Same as OP. I have never re-flashed CWM. This was my first time trying TWRP. I am looking for instructions to either...
Re-flash CWM
Re-install a version to TWRP that works
Thanks!
Click to expand...
Click to collapse
Do you currently have CWM or TWRP as your recovery?

Eks Dee Aye said:
Do you currently have CWM or TWRP as your recovery?
Click to expand...
Click to collapse
Currently the non-functioning TWRP. I tried flashing CWM from the Rom Manager app, but that froze too. Looking for a reliable fix. I do not have a preference for recovery.

Eks Dee Aye said:
Do you currently have CWM or TWRP as your recovery?
Click to expand...
Click to collapse
If you have either I guess it doesn't really matter. Just install/flash the attached file below just like you would any other rom via your recovery.
After it installs reboot back into recovery and you will see the old recovery replaced with the latest TWRP for the T989.
Lemme know if this works for ya.

Eks Dee Aye said:
Just install/flash the attached file below just like you would any other rom via your recovery.
Click to expand...
Click to collapse
This is the part I don't understand. If my TWRP is stuck, how do I install/flash via my recovery?

[Q] After CWM upgrade cannot start or restore phone

I have a rooted Galaxy S3 that is running the ATT Jelly Bean update.
Last night, while looking at ROM manager I got a popup saying there is a newer version of CWM and did I want to install it.
After installing it, the phone will only boot into recovery. I cannot get it to start. And when I tried to restore from a backup that I have used successfully before, I got an error while restoring data.
At this point, I am thinking that I might have bricked this phone. Searching on the ATT Galaxy S3 forum hasn't turned up anything relevant.
Does anyone have an idea what I can try next?
Thanks

northstar7 said:
I have a rooted Galaxy S3 that is running the ATT Jelly Bean update.
Last night, while looking at ROM manager I got a popup saying there is a newer version of CWM and did I want to install it.
After installing it, the phone will only boot into recovery. I cannot get it to start. And when I tried to restore from a backup that I have used successfully before, I got an error while restoring data.
At this point, I am thinking that I might have bricked this phone. Searching on the ATT Galaxy S3 forum hasn't turned up anything relevant.
Does anyone have an idea what I can try next?
Thanks
Click to expand...
Click to collapse
If you a can boot into recovery than you aren't bricked.
You can do a factory reset that might clear it up.
Worst case go into download mode and use Odin to reinstall the stock ROM.
Sent from my SGH-I747 using xda app-developers app

northstar7 said:
I have a rooted Galaxy S3 that is running the ATT Jelly Bean update.
Last night, while looking at ROM manager I got a popup saying there is a newer version of CWM and did I want to install it.
After installing it, the phone will only boot into recovery. I cannot get it to start. And when I tried to restore from a backup that I have used successfully before, I got an error while restoring data.
At this point, I am thinking that I might have bricked this phone. Searching on the ATT Galaxy S3 forum hasn't turned up anything relevant.
Does anyone have an idea what I can try next?
Thanks
Click to expand...
Click to collapse
Im assuming you powered down, did a battery pull and powered back up? Factory reset?
What error message is displayed when trying to restore a backup?
The latest cwm release is 6.0.2.8. If you came from 6.0.2.3, I would download a cwm flashable zip of that recovery and flash that. Perhaps try a reboot then. If it's still a no-go, try restoring a backup with the cwm you had just downloaded and flashed to see if it will restore without an error message

Different CWM
xBeerdroiDx said:
Im assuming you powered down, did a battery pull and powered back up? Factory reset?
What error message is displayed when trying to restore a backup?
The latest cwm release is 6.0.2.8. If you came from 6.0.2.3, I would download a cwm flashable zip of that recovery and flash that. Perhaps try a reboot then. If it's still a no-go, try restoring a backup with the cwm you had just downloaded and flashed to see if it will restore without an error message
Click to expand...
Click to collapse
Thanks very much for the advice.
For the record, my phone is displaying "ClockworkMod Recovery v6.0.2.9"

I just has this happen to me as well. I just put the s3 in download mode and used Odin to re flash cwm. I'm using the same version cwm.
Sent from my SAMSUNG-SGH-I747 using xda premium

I as well. Tried everything and no go. Will try ODIN and see if it works.
Domoo said:
I just has this happen to me as well. I just put the s3 in download mode and used Odin to re flash cwm. I'm using the same version cwm.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse

stranglely pressing the recovery button combo fixed it and im back in CM10.1 #lolwut?

In the end I got the phone working again
For whatever reason, after getting that update to ClockworkMod, the phone would not boot.
I followed the Beginners' Guide to Rooting the Galaxy S3 forum. When I was finished I immediately got an OTA update from ATT.
So now the phone is running again, but I've lost most of my customization and personal data.
What is with this CWM "upgrade?" Or is the problem with ROM Manager?
More likely is that I did something wrong.
At least I can make calls now.

Same here, stay away from that update! Bad things!

This also happened to me. Cwm is showing up as .9 instead of .8. I flashed a previous version of twrp and it still proceeded to go into recovery mode after selecting reboot. I did a factory reset and re flashed aokp and also cm10.1 (along with gapps of course) and it still did it. So I pulled the battery and put it into download mode and reset it from there. That's the only way to get the phone to boot up. From what I see here, is the basic fix for this problem flashing an older cwm in Odin?

Having the same issue, version .9 No amount of clearing data/wipe/reflash/restore will do anything for me either. So much for a lunchtime AOKP update...

I've looked in several different forums on xda and the general fix seems to be flashing a previous version of cwm. No need to reset your phone and flash roms all day long.
Download prior cwm release (.tar)
pull battery and replace
boot to download mode
connect to pc and flash cwm
Disconnect, pull battery, reboot
Here's the 6.0.2.3 release. You can grab the .8 in the Android dev section if you wish
https://www.dropbox.com/s/sfkjtndn7k0urmh/recovery-clockwork-6.0.2.3-d2att.tar
Let me know if this does not work. If your device is not recognized by your pc, you can try flashing this cwm zip in recovery itself (if you have a micro sd card):
http://d-h.st/8qP

I flashed with the same version of cwm I had previously before this issue (6.0.28). It seems to be an issue with 6.0.29 if so many people have this same issue.
Sent from my SAMSUNG-SGH-I747 using xda premium

xBeerdroiDx said:
I've looked in several different forums on xda and the general fix seems to be flashing a previous version of cwm. No need to reset your phone and flash roms all day long.
Download prior cwm release (.tar)
pull battery and replace
boot to download mode
connect to pc and flash cwm
Disconnect, pull battery, reboot
Here's the 6.0.2.3 release. You can grab the .8 in the Android dev section if you wish
https://www.dropbox.com/s/sfkjtndn7k0urmh/recovery-clockwork-6.0.2.3-d2att.tar
Let me know if this does not work. If your device is not recognized by your pc, you can try flashing this cwm zip in recovery itself (if you have a micro sd card):
http://d-h.st/8qP
Click to expand...
Click to collapse
I flashed the CMW-recovery_ATT-6.0.2.3_zip directly from the external sd card to the phone and the phone is now working. but I did have to reboot phone twice. the first time it stayed in recovery.
THANK YOU!!

xBeerdroiDx said:
I've looked in several different forums on xda and the general fix seems to be flashing a previous version of cwm. No need to reset your phone and flash roms all day long.
Download prior cwm release (.tar)
pull battery and replace
boot to download mode
connect to pc and flash cwm
Disconnect, pull battery, reboot
Here's the 6.0.2.3 release. You can grab the .8 in the Android dev section if you wish
https://www.dropbox.com/s/sfkjtndn7k0urmh/recovery-clockwork-6.0.2.3-d2att.tar
Let me know if this does not work. If your device is not recognized by your pc, you can try flashing this cwm zip in recovery itself (if you have a micro sd card):
http://d-h.st/8qP
Click to expand...
Click to collapse
I believe this can even be simplified a bit more. At least for me, some people may find Odin to be the simple way to do things. So you're stuck at recovery:
Hold the power button for 10 seconds to power off.
Boot to download mode by holding volume down and home. The phone will probably start to boot right away after releasing the power button. If it doesn't go to download, then your timing is off, try again.
Hold the power button for 10 seconds to power off and reboot.
It should boot regularly now.
Flash a new recovery. You can download CWM 6.0.2.8 or use this as an opportunity to move to TWRP. Once you have the img file on your phone, go to a terminal and (after su, if needed) run dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p18 (replace "/sdcard/recovery.img" with the path and name of the img file you downloaded. You can also flash the recovery using whatever other on-phone method you prefer.
The CWM download page is now showing that 6.0.2.8 is the newest version for many of the S3 variants, so they've certainly noticed the bug.

J M L said:
I believe this can even be simplified a bit more. At least for me, some people may find Odin to be the simple way to do things. So you're stuck at recovery:
Hold the power button for 10 seconds to power off.
Boot to download mode by holding volume down and home. The phone will probably start to boot right away after releasing the power button. If it doesn't go to download, then your timing is off, try again.
Hold the power button for 10 seconds to power off and reboot.
It should boot regularly now.
Flash a new recovery. You can download CWM 6.0.2.8 or use this as an opportunity to move to TWRP. Once you have the img file on your phone, go to a terminal and (after su, if needed) run dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p18 (replace "/sdcard/recovery.img" with the path and name of the img file you downloaded. You can also flash the recovery using whatever other on-phone method you prefer.
The CWM download page is now showing that 6.0.2.8 is the newest version for many of the S3 variants, so they've certainly noticed the bug.
Click to expand...
Click to collapse
How is this simpler? There are left out bits and errors all through your instructions. My steps were for odin so I'm not sure why you thought they were not.

[Q] Sprint Note 2 (SPH-L900) Bricked after attempted 4.3 Update

I've been having issue with my Sprint Note 2 for a while. I've also posted this to Reddit and other parts of the forum but so far have gotten no way to fix my issue. Here's the link to Reddit: http://www.reddit.com/r/techsupport...nt_note_2_sphl900_bricked_after_attempted_43/
Sorry, I didn't want to type that all up again and having to deal with formatting and such.
Basically, the gist of it, from what I can gather is that I have accidentally loaded the 4.3 bootloader with KNOX and it is currently preventing me from doing anything productive (flashing CWMR, rooting, installing stock, etc). I read here on the forum that there were ways to do so, especially this post: http://forum.xda-developers.com/showthread.php?p=46861777
I was wondering if there were steps for the Sprint Note 2 SPH-L900?
Any help in debricking my phone is appreciated.

Try these steps.
1. Boot phone into Odin/download mode
2. Flash twrp or cwmr via Odin.
3. When it reboots pull battery and then boot into recovery.
4. Flash this http://forum.xda-developers.com/showthread.php?p=36388145 it is mc2 bootloader, firmware, radio, etc...
5. Reboot phone. Things get weird for a few mins but it will boot.
You are now Knox free once again but you are also bone stock.
Sent from my SPH-L900 using XDA Premium 4 mobile app

jlmancuso said:
Try these steps.
1. Boot phone into Odin/download mode
2. Flash twrp or cwmr via Odin.
3. When it reboots pull battery and then boot into recovery.
4. Flash this http://forum.xda-developers.com/showthread.php?p=36388145 it is mc2 bootloader, firmware, radio, etc...
5. Reboot phone. Things get weird for a few mins but it will boot.
You are now Knox free once again but you are also bone stock.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I've tried that multiple times. The problem here is that I can't load CWMR or TWRP. At first, I assume that I'd have to root so I downloaded the CF auto root file and flash it using ODIN. Then I tried installing CWMR (after converting to .tar using Caboomi's tool here on the forum). It would reboot and I tried holding down volume up + power + home button but nothing would happen. I try combinations of that and still nothing. I flashed the 4.3 sboot.bin to get it back to stock Samsung bootloader then retried with CWMR without rooting first this time and it still doesn't work. ODIN would tell me that it succeeds but I can't enter Recovery no mater the combination of keys that I press. I'm assuming this has to do with Knox in which case I'd just have to wait for the official 4.3 firmware on SamMobile to flash it since stock 4.1.2 won't work.

QuantumInteger said:
I've tried that multiple times. The problem here is that I can't load CWMR or TWRP. At first, I assume that I'd have to root so I downloaded the CF auto root file and flash it using ODIN. Then I tried installing CWMR (after converting to .tar using Caboomi's tool here on the forum). It would reboot and I tried holding down volume up + power + home button but nothing would happen. I try combinations of that and still nothing. I flashed the 4.3 sboot.bin to get it back to stock Samsung bootloader then retried with CWMR without rooting first this time and it still doesn't work. ODIN would tell me that it succeeds but I can't enter Recovery no mater the combination of keys that I press. I'm assuming this has to do with Knox in which case I'd just have to wait for the official 4.3 firmware on SamMobile to flash it since stock 4.1.2 won't work.
Click to expand...
Click to collapse
After flashing cwm do battery pull...Don't let it auto-reboot.
Also try different version of Odin maybe

louforgiveno said:
After flashing cwm do battery pull...Don't let it auto-reboot.
Also try different version of Odin maybe
Click to expand...
Click to collapse
I tried 3.07, 3.09, and even barebone 1.85 that came with CF auto root. It doesn't work. I can't load recovery just fine (according to ODIN) but I can't get into Recovery.

Here is the fix https://www.dropbox.com/s/s2clvyo4y6gar6s/4.3_Unbrick.tar
I promise this will fix your issue, but when you get done, you will be on MC2 with the 4.3 bootloader, but, it will boot, let you flash recovery and everything. I know this because I did the same thing as you and flashed the old cf-auto root and bricked my phone to, and I created this file to fix it and if you look in the help section, you will find my thread on how to unbrick after 4.3 update fail.
I promise though, this will fix your fone

Keithgordon said:
Here is the fix https://www.dropbox.com/s/s2clvyo4y6gar6s/4.3_Unbrick.tar
I promise this will fix your issue, but when you get done, you will be on MC2 with the 4.3 bootloader, but, it will boot, let you flash recovery and everything. I know this because I did the same thing as you and flashed the old cf-auto root and bricked my phone to, and I created this file to fix it and if you look in the help section, you will find my thread on how to unbrick after 4.3 update fail.
I promise though, this will fix your fone
Click to expand...
Click to collapse
...My God..... What ever you did, it worked. Turns out, Caboomi's file didn't work too well. I couldn't get CWMR working at all even after converting to .tar. I used TWRP instead and it works. Problem was that it asked me for my password, which I don't know since I tried everything, so I had to resort to wiping everything. I installed the file jlmancuso suggested, loading it onto SD card then flashing using TWRP, and now my Samsung Note 2 is debricked.
Your file was a godsend. Thank you!

No recovery stuck on bootloop
im having the same issue could you post that dropbox link again

So i was able to get recovery back but it wont let me mount my sd card so i cant flash anything through recover was hoping the file you have could be loaded through odin as it is a .tar file correct please help and thanks in advance.
Keithgordon said:
Here is the fix https://www.dropbox.com/s/s2clvyo4y6gar6s/4.3_Unbrick.tar
I promise this will fix your issue, but when you get done, you will be on MC2 with the 4.3 bootloader, but, it will boot, let you flash recovery and everything. I know this because I did the same thing as you and flashed the old cf-auto root and bricked my phone to, and I created this file to fix it and if you look in the help section, you will find my thread on how to unbrick after 4.3 update fail.
I promise though, this will fix your fone
Click to expand...
Click to collapse

rckingws6 said:
So i was able to get recovery back but it wont let me mount my sd card so i cant flash anything through recover was hoping the file you have could be loaded through odin as it is a .tar file correct please help and thanks in advance.
Click to expand...
Click to collapse
Yes, flash that file in Odin, it will downgrade you to MC2 with the MK4bootloader

Keithgordon said:
Yes, flash that file in Odin, it will downgrade you to MC2 with the MJA bootloader
Click to expand...
Click to collapse
MJA ? Isn't that an s4 bootloader?

louforgiveno said:
MJA ? Isn't that an s4 bootloader?
Click to expand...
Click to collapse
yep, sorry, I just woke up....I meant whatever version we are on with the note, what is it? MK4? I have both so I keep switching back and forth in the threads. Funny thing is, they are completely different, i will change that, thanks for pointing that out

my friend 's L900 bricked too ，but I cant download the file you provide , the error message is “Error (509) This account's public links are generating too much traffic and have been temporarily disabled”
may you provide another URL to download it or mail it to me ？ my email is [email protected] , thanks.
another question , how can i flash it into device with ODIN ？ from Pit ？ bootloader ？PDA ？PHONE ？ or others ？
Sent from my SPH-L900 using xda app-developers app
---------- Post added at 06:23 PM ---------- Previous post was at 06:14 PM ----------
Keithgordon said:
yep, sorry, I just woke up....I meant whatever version we are on with the note, what is it? MK4? I have both so I keep switching back and forth in the threads. Funny thing is, they are completely different, i will change that, thanks for pointing that out
Click to expand...
Click to collapse
my friend 's L900 bricked too ，but I cant download the file you provide , the error message is “Error (509) This account's public links are generating too much traffic and have been temporarily disabled”
may you provide another URL to download it or mail it to me ？ my email is [email protected] , thanks.
another question , how can i flash it into device with ODIN ？ from Pit ？ bootloader ？PDA ？PHONE ？ or others ？
Sent from my SPH-L900 using xda app-developers app

yea I still cant dowload it sorry for being a pest.
Keithgordon said:
Yes, flash that file in Odin, it will downgrade you to MC2 with the MK4bootloader
Click to expand...
Click to collapse

hello if you are online i need some help i dl the 4.3 note 2 update it has a different build than the one sprint has there are some features that are not on this build is there any way for me to get the ota from sprint
rckingws6 said:
yea I still cant dowload it sorry for being a pest.
Click to expand...
Click to collapse

rckingws6 said:
So i was able to get recovery back but it wont let me mount my sd card so i cant flash anything through recover was hoping the file you have could be loaded through odin as it is a .tar file correct please help and thanks in advance.
Click to expand...
Click to collapse
Try using TWRP instead. It gives you the option to mount an external SD card. Also try restarting into recovery again. I had Recovery bugged out on me once.

QuantumInteger said:
Try using TWRP instead. It gives you the option to mount an external SD card. Also try restarting into recovery again. I had Recovery bugged out on me once.
Click to expand...
Click to collapse
i need some help

yea i can get into twrp recovery now but my sdcard wont mount thats why im trying to use odin
QuantumInteger said:
Try using TWRP instead. It gives you the option to mount an external SD card. Also try restarting into recovery again. I had Recovery bugged out on me once.
Click to expand...
Click to collapse

For those of you who have bricked Note 2s (SPH-L900), I'm going to drop a DropBox link here to a folder of ALL of the files that I used to unbrick my phone. I experimented with multiple methods (and several sleepless nights). Some of them will be useful to you, not all. I have the Android SDK and Caboomi's converter for .img to .tar. It doesn't work too well for CWMR just FYI. ODIN-OC will attempt to load stock MC2 onto your phone but it won't work if it's bricked. Arc Converter is a program I used to try convert the MK4 .zip file to .tar to try and flash an update using ODIN. It didn't work. The steps that I took to unbrick my phone will be posted after the link.
https://www.dropbox.com/sh/c2bfpfdf0qbs6bu/ZiNC-BF5kf
Be patient. Some of the files are still updating.
Steps:
1) Put your phone into Download mode by holding volume down + power + home button at bootup
2) Use ODIN (3.07 or 3.09) to load the 4.3_Unbrick.tar file. This will take a bit of time so be patient. Once the phone boots up again, you'll get past the boot screen that says "Samsung Galaxy Note II" and you'll get the Samsung logo with the spinning icon but it will loop. This is normal.
3) Next, power off (yank the battery and cable, leave battery out but plug the cable back in) and reboot into download.
4) Flash the TWRP .tar file (don't try converting the CWMR to .tar, it won't work) then reboot.
5) Hold volume up + power + home button (be patient here)
6) You should see the Team Win logo. You're now in recovery. The TWRP may ask you for the password. It is NOT the passcode to your lockscreen or your Google password. I have no idea what it is. At this point, you'd have to wipe your phone (internal only) if you want to flash the stock recovery.
7) Load the MC2 stock recovery file with counter reset onto a microSD card and mount it onto the phone (play around with TWRP, if it doesn't see the SD card the first time, restart or play with the mount function). Just be careful not to wipe your microSD card.
8) Flash the stock recovery (give it time) and it'll restart. You should be back at 4.1.2.
EXTRA STEPS
If you're still interested in 4.3, load the MK4 update onto the microSD card as well. BEFORE you go through the activation process for the 4.1.2 firmware at boot, boot into recovery. Flash the 4.3 update using stock recovery. This should put you onto 4.3 after the phone reboots. You should now have stock 4.3 (no root).

Sorry for all the download errors, I am uploading to my websight right now and as soon as it uploads, I will post the URL, it should download much faster too. I didnt realize so many people needed it