Does anyone go back to stock ROM?
How?
The tread with the stock firmware doesn't have PIT file.
Me!
Some days ago, i come back to stock ROM usin just odin and original firmware (downloaded on the thread with all firmware here on xda i don't know what is pit file
Sent from my GT-I9195 using xda app-developers app
you don't need pit file.
I've done it couple of times, flashig to different realises from different regions
just download firmware, start odin, make sure nothing is checked just auto reboot select PDA, find xxxxx.tar.md4 and press start
fburgos said:
you don't need pit file.
I've done it couple of times, flashig to different realises from different regions
just download firmware, start odin, make sure nothing is checked just auto reboot select PDA, find xxxxx.tar.md4 and press start
Click to expand...
Click to collapse
Doesn't need F. reset checked?
Related
im trying to use odin to put a stock rom on my phone...and everything goes fine till the end and the modem part fails...all the time...i did a factory reset...and tried 2 different roms...any suggestions...or links to rooted stock roms...i tried root66 and they failed ...but have worked in the passed for me...and now somehow theres a verizon rom on my phone that will boot but then do nothing...please...please...please help... THANKS IN ADVANCE...
re: flashing
phordych05 said:
im trying to use odin to put a stock rom on my phone...and everything goes fine till the end and the modem part fails...all the time...i did a factory reset...and tried 2 different roms...any suggestions...or links to rooted stock roms...i tried root66 and they failed ...but have worked in the passed for me...and now somehow theres a verizon rom on my phone that will boot but then do nothing...please...please...please help... THANKS IN ADVANCE...
Click to expand...
Click to collapse
You need to be very specific about the problem you are experiencing.
Exactly what model is your phone, Tmobile T999 or AT&T I747 ?
Also do you want to flash the stock rom for your phone or do you
want to flash the stock-rooted rom?
The Verizon rom did not just happen to appear in your phone, you or someone
else must have flashed it for reasons which are beyond my comprehension.
Good luck!
Misterjunky said:
You need to be very specific about the problem you are experiencing.
Exactly what model is your phone, Tmobile T999 or AT&T I747 ?
Also do you want to flash the stock rom for your phone or do you
want to flash the stock-rooted rom?
The Verizon rom did not just happen to appear in your phone, you or someone
else must have flashed it for reasons which are beyond my comprehension.
Good luck!
Click to expand...
Click to collapse
I want a stock rooted rom...i have the t999
re: stock rom
phordych05 said:
I want a stock rooted rom...i have the t999
Click to expand...
Click to collapse
If you want a stock rom click here: UVDLJA this is the un-rooted T999 Galaxy S3 4.1.1 Jellybean firmware.
This is the same rom which came with your T999 Galaxy S3 it needs to be flashed using ODIN.
You need to unzip the file in order to get the TAR file inside before flashing.
After flashing it might take up to 5-10 minutes to fully boot.
Good luck!
Misterjunky said:
If you want a stock rom click here: UVDLJA this is the un-rooted T999 Galaxy S3 4.1.1 Jellybean firmware.
This is the same rom which came with your T999 Galaxy S3 it needs to be flashed using ODIN.
You need to unzip the file in order to get the TAR file inside before flashing.
After flashing it might take up to 5-10 minutes to fully boot.
Good luck!
Click to expand...
Click to collapse
i really wanted a rooted one...BUT THIS VERIZON MODEM IS STUCK ON MY PHONE...I FLASHED...oops sry for the caps...cause everything works fine till the end and says modem failed...so im thinking i have to flash a modem first...yes...?
re: modem
phordych05 said:
i really wanted a rooted one...BUT THIS VERIZON MODEM IS STUCK ON MY PHONE...I FLASHED...oops sry for the caps...cause everything works fine till the end and says modem failed...so im thinking i have to flash a modem first...yes...?
Click to expand...
Click to collapse
No, if you odin flash any rom it will over write the modem.
If your phone is a T999 (not t999v) then do this and the phone will work properly:
This will over write your modem with the proper one for a T999 phone and this will
flash the stock rooted T999 4.1.2 Jellybean rom.
Follow the instructions below.
Here is the step by step guide:
After you have followed these instructions your phone will have the new T999 4.1.2 jellybean pre-rooted firmware.
Download the stock-rooted Odin flash T999_UVDMD5 Samsung Galaxy S3 Jellybean v4.1.2 firmware.
After downloading make a folder on your computer's desktop and unzip the
file using Winzip or 7zip so the .TAR file is in the new folder you just made.
Download and extract Odin into the same folder you made containing the TAR file
Here is the link for Odin: http://d-h.st/Q14
Download ODIN which is required for flashing the stock rooted firmware (a windows app)
Download the Odin Flash firmware for T999 Tmobile then copy it to the same folder as Odin
Run Odin by double clicking the Odin.exe within the same folder as the TAR file you extracted
Turn off your phone and boot into DOWNLOAD MODE (Volume Down + Home + Power Hold until phone powers up, then release and press Volume Up to enter Download Mode)
Once in Download Mode, connect the USB/Charger cable to the phone and plug into the USB port on your computer.
You should now see a COM** port listed toward the top-left of Odin (under ID:COM)
Click on the PDA button in the middle-right area of Odin.
Browse to and select the Firmware you downloaded (TAR file)
Make sure Auto-Reboot and F. Reset Time are the only options checked and that PDA is the only other thing checked.
TRIPLE CHECK your settings and that you have selected the correct firmware for your model phone and are using the correct options.
If you are using a laptop, make absolutely sure you are plugged in, or if on battery, that it is charged enough and will not go into sleep mode during flash.
Click Start to begin the flash. This will take a while, so be patient!
Once complete, in the top-left box in Odin, it will say PASS and the phone should have automatically rebooted.
You may unplug the phone and close Odin if you wish.
Wait at least 5-10 minutes for the system to boot the first time and then build its cache!
(It may seem to hang during boot, this is normal and you must be patient!!!)
But the Chinese models usually come with write protection
Can someone give me a link for MK2 Modem/Radio instructions via Odin (through mobile or computer odin) and the link for the compatible MK2 file itself ?
re: mk2 modem
xperia_88 said:
Can someone give me a link for MK2 Modem/Radio instructions via Odin (through mobile or computer odin) and the link for the compatible MK2 file itself ?
Click to expand...
Click to collapse
Here is the direct download link for the MK2 modem/radio (modem.bin):
http://download1276.mediafire.com/dbomd3ltqngg/1gsjokadys4l89x/modem.bin
When flashing using Odin be sure to use the PHONE slot for the modem.bin
or odin will not recognize it. You can also flash it using mobile odin.
Good luck!
Can I use this on wicked v7 4.2.2 without problems how do I flash it on mobile odin
Sent from my SGH-M919 using xda app-developers app
Is this Knox-free version?
Paulenski said:
Is this Knox-free version?
Click to expand...
Click to collapse
Thus is just a modem/radio. No Knox if Odin on its own. It's the bootloader that has Knox.
☞ Sent from here☜???
re: modem bin
13silencer13 said:
Can I use this on wicked v7 4.2.2 without problems how do I flash it on mobile odin
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Yes you can use it on Wicked 4.2.2 custom rom.
And this modem.bin will NOT effect the KNOX status of your phone.
Here are the instructions for mobile odin.
-Flashing with Mobile ODIN is easy. You start by starting the app and the app will check your system has everything it needs to continue (like root). It may need to download an additional package, so it is advised you have Wi-Fi available.
Now you should see the main Mobile ODIN screen. It will list a set of partitions. Clicking a partition will allow you to select a file from your SD card to flash to that partition. Do not worry about selecting the wrong file - Mobile ODIN will not let you. Separate files (named after the partition) as well as .tar and .tar.md5 files are supported.
From the desktop ODIN you maybe used to "PDA", "PHONE", and "CSC" buttons. All three of these buttons have been replaced by the "Open file ..." button. This button will open the file you select from the SD card, and find all the partitions it can flash inside that file. So if you select a .tar file containing kernel and modem, the Kernel and Modem partitions will be set up to use that .tar file for flashing.
Now that we have selected what we want to flash, if you have the Pro version you can proceed to the EverRoot section. The EverRoot options allows you to root your firmware while it is being flashed. Never again will you be without root! Select here which apps you want to inject in the firmware that is being flashed.
Now that we are all done selecting partitions and configuring EverRoot, we continue to "Flash firmware". Mobile ODIN will gather all the information it needs and perform the flash. Before starting, however, it will check that your battery level is over 50%, and if applicable offer to verify MD5 checksums on the files you have selected to flash. If all is well, it will reboot into recovery mode, and flash the firmware you have selected.
Good luck!
I extracted the 4.3 modem.bin from the sammobile.com MI7 firmware. I tried to flash it through odin v3.09 as administrator and it looks like it flashes fine, no errors etc but when the phone reboots and I goto to about device section it still shows the NB4 baseband version. Phone is working fines still though.
Attempt 2, I used cygdrive to extract the modem.bin and tar it and tried to flash it through Odin v3.09 as-well and had the same results.
I am wondering if I need to wipe cache for the new version to show? Or is that version number in the about section set somewhere else? Is there a way to verify that I am using the 4.3 modem.bin from MI7 besides looking at the about section?
dobbs3x said:
I extracted the 4.3 modem.bin from the sammobile.com MI7 firmware. I tried to flash it through odin v3.09 as administrator and it looks like it flashes fine, no errors etc but when the phone reboots and I goto to about device section it still shows the NB4 baseband version. Phone is working fines still though.
Attempt 2, I used cygdrive to extract the modem.bin and tar it and tried to flash it through Odin v3.09 as-well and had the same results.
I am wondering if I need to wipe cache for the new version to show? Or is that version number in the about section set somewhere else? Is there a way to verify that I am using the 4.3 modem.bin from MI7 besides looking at the about section?
Click to expand...
Click to collapse
You need to uncheck the "auto reboot" and mamually reboot it into download mode again.
Then you flash the modem one more time.
I did like it last time. But baseband version shows unknown. I tried regiona away then has NO unluck.
I am trying to unroot and restore stock ROM so that I can sell my Note 2014 10.1.
I am using ODIN 3.09 and P600UEUCNK1_P600XARCNK1_HOME.tar.md5
ODIN keeps giving me a FAIL. Looks like "Cant Open Serial Port". I have attached a screen shot from ODIN.
Any ideas as to what I can do here?
Thanks
You need to extract the zip file, and edit .md5 off the end, leaving a .tar file to flash. Make sure you unroot via superuser, then factory reset, then download mode.....Will take 7-9 minutes. Wait for reboot, and removed to show in ODIN. Just did this myself, and device shows official, and recovery is stock, without even the Knox splash showing recovery bit! Easy breezy. I flashed on top of 4.4.4 bootloader the 4.4.2 .tar, and let it update OTA. T-Mobile P607-T Gluck!
Worked like a charm my friend...Thanks so much
Sent from my SM-N900P using Tapatalk
I followed these steps. Flashed same tar file, and successful install. Although i cant update software because says my version has been modified. Anyway to still get updates and be totally stock?
Flash updates from Kies instead OTA is never going to work again.
Sent from my SM-P600 using XDA Free mobile app
Please could anyone had the steps ... the same issue is faced with Note 10.1 Gt-8000
I' m using N8000XXUDNF2_N8000OJVDNF3_N8000XXUDNF1_HOME.tar with ODIN 3.07 which is detecting the com 3 or com 6 with it, and failing always and the device is stopped at either ODIN MODE if I used the volume down plus power or at Firmware upgrade encountered an issue. please select recovery mode in kies and try again... it would never enter to the recovery mode or Bootloader, please advise... thanks in advanced.
Hello, I am using Odin v3.13.3
My phone was running with latest Ukraine firmware which is:
A705FNXXU3ASJ3 ap
A705FNXXU3ASJ3 bl
A705FNXXU3ASH1 cp
A705FNOXM3ASJ3 csc
Today I wanted to format it and decided to do it via Odin. But it stuck at system.img. So I tried to flash the firmware which was just before the newest one. And Odin flashed it with success.
I also had the same problem when I tried to install that older firmware a few months ago till I found Odin with version 3.13.3
So, What do I need to do, I couldn't find a newer Odin. Is there any other problem. How can I flash the latest firmware via Odin?
Thanks ^^
where is home csc,there is only 4 but must have 5 to flash...
imenko79 said:
where is home csc,there is only 4 but must have 5 to flash...
Click to expand...
Click to collapse
It's same as csc, if you flash home csc it doesn't wipe. If you flash only CSC, it wipes your phone. You select one of them, you can't flash both.
And as you see, I succesfully flashed an older firmware. The problem is that odin can't flash the newest firmware.
y.erenbektas said:
Hello, I am using Odin v3.13.3
My phone was running with latest Ukraine firmware which is:
A705FNXXU3ASJ3 ap
A705FNXXU3ASJ3 bl
A705FNXXU3ASH1 cp
A705FNOXM3ASJ3 csc
Today I wanted to format it and decided to do it via Odin. But it stuck at system.img. So I tried to flash the firmware which was just before the newest one. And Odin flashed it with success.
I also had the same problem when I tried to install that older firmware a few months ago till I found Odin with version 3.13.3
So, What do I need to do, I couldn't find a newer Odin. Is there any other problem. How can I flash the latest firmware via Odin?
Thanks ^^
Click to expand...
Click to collapse
Try going into developer options and enabling OEM Unlock then flashyour desired CSC FW with Odin
dezborders said:
Try going into developer options and enabling OEM Unlock then flashyour desired CSC FW with Odin
Click to expand...
Click to collapse
I'll give this next weekend. Thanks ^^