Related
Anyone seen anything like that?
Sent from my GT-N7000 using XDA App
ekerbuddyeker said:
Anyone seen anything like that?
Sent from my GT-N7000 using XDA App
Click to expand...
Click to collapse
the cases with the stands arent available yet.
but the next best thing is the samsung flip cover. it replaces the back cover of the galaxy but adds a leather cover for the screen.
Souai said:
the cases with the stands arent available yet.
but the next best thing is the samsung flip cover. it replaces the back cover of the galaxy but adds a leather cover for the screen.
Click to expand...
Click to collapse
I got one of those it came free with my phone. It does look very good but i gotta say it offers no real protection. It doesnt cover the metal sides and the fact that it cant be 'locked' onto the screen means theres a good chance it will flip open if you drop ur phone and the screen can still be damaged. It makes taking photos extremely inconvenient too.
I now have 2 of those flip covers sitting on my desk gathering dust, the other one came free with my gf's white note.
This is sort of like an ipad cover/stand thingy
ebay item: 250935866665
Not enough posts to put a link in...
really expensive
That wouldn't even work. The magnets and sensors in the iPad are what lets the awesomeness happen. The Note doesn't have either
louisbiker said:
This is sort of like an ipad cover/stand thingy
ebay item: 250935866665
Not enough posts to put a link in...
Click to expand...
Click to collapse
why does it have mickey mouse ears
GALAXYNOTE said:
I got one of those it came free with my phone. It does look very good but i gotta say it offers no real protection. It doesnt cover the metal sides and the fact that it cant be 'locked' onto the screen means theres a good chance it will flip open if you drop ur phone and the screen can still be damaged. It makes taking photos extremely inconvenient too.
Click to expand...
Click to collapse
Well, neither would an iPad2-style smart cover, which is what the OP was asking about!
For me, the flip case is perfect because what I want a case for is simple to protect the screen when I put the phone in my pocket. Impact protection is doesn't figure into my personal requirements because I consider the additional bulk to be an unacceptable trade off for the protection that it would offer in the very rare event that I drop the device. YMMV of course!
The thing I like about the flip cover, other than the fact that it adds almost no bulk to the device, is that I find myself holding the Note one handed much like I would a paper back book, with my thumb on the inside of the cover, 3 fingers behind the device and cover, and my little finger resting on the edge of the bottom of the note.
I also find the cover a great stabiliser when taking photos in landscape as I flip the cover down and use it as part of my "grip". It works to a lesser degree in portrait too, though to start with it does feel a little more cumbersome.
Regards,
Dave
Absolutely, I love how the flip actually makes the Note a lot easier to hold safely. I'm actually happy to have it out while walking around, whereas I've been afraid I'd drop it on the pavement without the flip. I'd pay good money for an app that would switch it on and off when the proximity/light sensors see the case open or close, that would be great...
victorlht88 said:
not true. i am sure its possible for developers to use the light/proximity sensor to lock/unlock the phone or maybe using some app.
http://forum.xda-developers.com/showthread.php?t=1125946
Click to expand...
Click to collapse
This really works but specially the locking option. if i close the flip cover it actually turn off.
wish it would be the same on how unlocking it with just opening the flip cover.
very nice findings
rockysiccion said:
This really works but specially the locking option. if i close the flip cover it actually turn off.
wish it would be the same on how unlocking it with just opening the flip cover.
very nice findings
Click to expand...
Click to collapse
Yes but what if your hand drifts over the prox sensor? sounds annoying...
foxmeister said:
The thing I like about the flip cover, other than the fact that it adds almost no bulk to the device, is that I find myself holding the Note one handed much like I would a paper back book, with my thumb on the inside of the cover, 3 fingers behind the device and cover, and my little finger resting on the edge of the bottom of the note.
Click to expand...
Click to collapse
I do use it the same way
Im looking for a flip case where you can detach the 'flip' part of the case. At the moment im using the Samsung Flip case (instead of a screen protector) within a cheap TPU case that has a kickstand. Im finding the camera tricky to use with the flip part of the case getting in the way, so it would be good if i could take it off when needed, then reattach it. :good:
I've done a DIY mod on the flip case - cut off the 'flip' part and stuck it to the TPU with velcro - as you could imagine its far from perfect...
I've been searching for a while but nothing so far.....
Well here's something the case makers seriously have to do.
Imagine something as convenient as the Microsoft tablet detachable keyboard?! But a detachable flip.
I would buy one without thinking twice.
Sent from my GT-N7000 using Tapatalk 2
Check this out...
http://www.ebay.com/itm/New-OEM-Pro...Accessories&hash=item3cc828af01#ht_3059wt_724
Jrob2k said:
Check this out...
http://www.ebay.com/itm/New-OEM-Pro...Accessories&hash=item3cc828af01#ht_3059wt_724
Click to expand...
Click to collapse
that's a normal flip case......he's looking for a flip case where the cover is detachable.
Sent From My Paranoid Powered Note Baby!
http://www.ebay.com/itm/Samsung-Gal...034417?pt=PDA_Accessories&hash=item3f159520b1
Hope this helps.
s4sixty said:
http://www.ebay.com/itm/Samsung-Gal...034417?pt=PDA_Accessories&hash=item3f159520b1
Hope this helps.
Click to expand...
Click to collapse
Looks like a practical solution.
However it has a magnetic clasp. If I understood correctly, this is bad for the Note, because it interacts with the digitiser ?
peseta said:
Looks like a practical solution.
However it has a magnetic clasp. If I understood correctly, this is bad for the Note, because it interacts with the digitiser ?
Click to expand...
Click to collapse
U didn't indicate u want one without a magnetic clasp. :silly:
I have a normal wallet style flip case and it has a magnet, doesn't interfere my GNote's digitizer or wacom sensor.
Sent from my GT-N7000 using Tapatalk 2
Is there any flip cover that only the front one like apple ipad one? So could use any hardcase...
Thanks for the input.
The Mercury colour case looks good, i'll bear it in mind. There a couple of youtube vids knocking about so i'll do some more research.
As usual, you need a woolly coat to get the things you want...
Detachable front cover case for the iPhone A larger case for the Note would work well.
----
There must be a demand for such a case? I can't be the only one who prefers not to use screen protectors, but finds a flip case gets in the way of using the phone, especially the camera!?
The search continues....
Edit; Found another one;
Luxury window flip case- not sure where the 'luxury' element of the case comes in as to be fair, it looks cheap and nasty!
maybe you can try modding one using valcro
akromatic said:
maybe you can try modding one using valcro
Click to expand...
Click to collapse
I did, it looked naff! Ive gone back to using screen protectors without a flip case until i find what im looking for.
kbm said:
Im looking for a flip case where you can detach the 'flip' part of the case. At the moment im using the Samsung Flip case (instead of a screen protector) within a cheap TPU case that has a kickstand. Im finding the camera tricky to use with the flip part of the case getting in the way, so it would be good if i could take it off when needed, then reattach it. :good:
I've done a DIY mod on the flip case - cut off the 'flip' part and stuck it to the TPU with velcro - as you could imagine its far from perfect...
I've been searching for a while but nothing so far.....
Click to expand...
Click to collapse
I have one of these : http://www.ebay.co.uk/itm/AIO-BLACK..._MobilePhonesCasesPouches&hash=item2570d08d2f
You can remove the phone relatively easy when you need to use the camera, is a bit fiddly to get to the stylus (but I have large fingers)
the magnetic clasp locks around the rear of the case/phone so does not affect the digitizer.
Hope this helps
I was also looking for a detachable flip casing .....the normal flip casing is uncomfortable feels weird when capturing pictures & recording videos
I bought a blue flip case says official from amazon, it was fine for the first month, but after that, I just took it off, its so uncomfortable to use. any suggestions for some others
I've got one of these - Amazon Link and it's just the job.
Easy to detach and the corners have save my note a couple of times now.
hey u guys ever try buying from http://list.qoo10.sg/item/Q100/406210991?sellerview=on?
pretty cheap...i bought a so call Korean brand flip case..for sgd$9? will be waiting for it..
here is a detachable flipcase on ebay here is the link for a youtube video i know it is for iphone but still http://www.youtube.com/watch?v=8CVG4czXcIs
here is the link for the case for the note it is a tpu case with detachable flip http://www.ebay.com/itm/Samsung-Gal...919296?pt=PDA_Accessories&hash=item4d03b8b880
it has a magnet but it doesn't damage the screen it is a very nice case
Looking for some help. I've looked in many many places but haven't found a cover like the magnetic cover iPad users have. Is there such a cover for the Note 10.1? Looking for the thinnest cover I can find.
Sent from my Nexus 4 using xda app-developers app
The thinnest cover will still be thicker than the iPad because we don't have the magnetic hinge that would allow only the front cover..
The Samsung cover is remarkably thin, but doesn't stay closed.
There are several trifold covers that have a back that then clips onto the corners of the table with a cut out for the pen., several ship from Hong Kong. Some on eBay, some on Amazon.com the stock is constantly changing.
I ended up getting one that is advertised ads unless thin by mistake. It uses an adhesive to stick to the back of the pad. I really DON'T like that. It also makes removing the pen difficult. Plus it doesn't have a slot to charge the tab without opening the cover. I had to cut one.
It has a fold over flap so that it doesn't open accidentally, but the cover is very floppy. I've only been using it a few weeks, but it just doesn't feel that solid.
In the end I'll probably go with a knockoff Samsung if I can find one that stays closed.
Sent from my GT-N8000 using Tapatalk HD
Agree with the above...the thinnest and sexiest is probably the Samsung magnetic book cover. I wasn't fond of it at first, but I've been using it over my i-Blason lately (which is also very nice but is no where near as thin). Lack of magnet to hold cover closed is really not an issue for me. If I am holding it it stays shut.
Sent from my Galaxy Nexus using Tapatalk 2
Guess I'll go for the Samsung cover .. hope it stays closed.
If you're going to buy a magnetic cover you should get the samsung one. Most other ones will probably cause problems with your wacom digitizer if the magnets get too close while you're using it.
I bought the Samsung white cover for £31 on Amazon, it just finishes the look of my tablet, love it. Jim
Samsung white cover with magnets works for me, I think that it can't have a magnetic closer option because it would interfere with the Wacom digitizer.
Sent from my GT-N8013 using Tapatalk HD
mrbkkt1 said:
Samsung white cover with magnets works for me, I think that it can't have a magnetic closer option because it would interfere with the Wacom digitizer.
Sent from my GT-N8013 using Tapatalk HD
Click to expand...
Click to collapse
That may be, but just one more thin flap around the back would solve that. Some of the knock offs have just that.
Sent from my GT-N8000 using Tapatalk HD
deecee52 said:
That may be, but just one more thin flap around the back would solve that. Some of the knock offs have just that.
Sent from my GT-N8000 using Tapatalk HD
Click to expand...
Click to collapse
I actually hate that flap.
Maybe a static cling strip would do well, I should play with it to see.
Sent from my SGH-T889 using Tapatalk 2
mrbkkt1 said:
I actually hate that flap.
Maybe a static cling strip would do well, I should play with it to see.
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
I can understand that. I have one that folds as part of the tri fold stand so much of time I don't know its there.
Static cling would be great. Keep us posted.
Sent from my GT-N8000 using Tapatalk HD
Try looking at the Anymode cases WEBSITE
I have one and I like it a lot, seems to give decent protection and is wafer thin
AGxM said:
Try looking at the Anymode cases WEBSITE
I have one and I like it a lot, seems to give decent protection and is wafer thin
Click to expand...
Click to collapse
Which one you have? They look interesting. Not sure how some of them on their site hold onto the tablet...
Sent from my Nexus 4 using xda app-developers app
I have also ordered one online. The "vip" model. I am expecting it to arrive tomorrow together with the GNote 10.1. I will post pictures with the Note with the case on and off so you can evalutate if this one is ok for you or not
My Note should arrive tomorrow and i'll pretty soon get a cover for it. I really dislike Samsungs build quality, i could scratch the whole back of it in one day i guess .. Like many did with the S3. My Motorola razr i doesn't even show a scratch even if it has been dropped by my girlfriend once and i don't handle it too careful.
I think i'll go with the Samsung Diary cover. I don't want my tablet to be bulky just because the manufacturer can't use proper materials and i'm too afraid of scratching it. But the fact that it won't stay closed is a major drawback, seems like i won't get the allround case i need. I think i'll have a look if i can get the Anymode I-Band case in Germany, at least this one looks good in my opinion.
crazyondigital
I bought one from crazyondigital on amazon. had it for months and am pretty happy. it handles portrait and landscape. on amazon and inexpensive.
AGxM said:
Try looking at the Anymode cases WEBSITE
I have one and I like it a lot, seems to give decent protection and is wafer thin
Click to expand...
Click to collapse
Is it only possible for people in the U.K. to order those cases or am I missing something? I can't order any of the products on the website....
---------- Post added at 03:11 PM ---------- Previous post was at 03:05 PM ----------
rmeulendijk said:
Is it only possible for people in the U.K. to order those cases or am I missing something? I can't order any of the products on the website....
Click to expand...
Click to collapse
Sorry, found it!!
savvacon said:
Looking for some help. I've looked in many many places but haven't found a cover like the magnetic cover iPad users have. Is there such a cover for the Note 10.1? Looking for the thinnest cover I can find.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
The Samsung Book Cover is about the closest to the smart cover. However I have an iPad 3 also and that smart cover is dangerous... It is really slick and if you are not really careful it will detach itself...
Have you tried this case? http://www.amazon.de/Stilgut-Origin...5PZW/ref=sr_1_2?ie=UTF8&qid=1361754356&sr=8-2
deecee52 said:
The thinnest cover will still be thicker than the iPad because we don't have the magnetic hinge that would allow only the front cover..
The Samsung cover is remarkably thin, but doesn't stay closed.
There are several trifold covers that have a back that then clips onto the corners of the table with a cut out for the pen., several ship from Hong Kong. Some on eBay, some on Amazon.com the stock is constantly changing.
I ended up getting one that is advertised ads unless thin by mistake. It uses an adhesive to stick to the back of the pad. I really DON'T like that. It also makes removing the pen difficult. Plus it doesn't have a slot to charge the tab without opening the cover. I had to cut one.
It has a fold over flap so that it doesn't open accidentally, but the cover is very floppy. I've only been using it a few weeks, but it just doesn't feel that solid.
In the end I'll probably go with a knockoff Samsung if I can find one that stays closed.
Sent from my GT-N8000 using Tapatalk HD
Click to expand...
Click to collapse
As in update: I received a very cheap trifold magnetic cover that I ordered off of eBay similar to this. http://item.mobileweb.ebay.com/viewitem?itemId=200899933118&index=6&nav=SEARCH&nid=87359384600
So far it is working fine. It has magnets to keep closed and my pen works fine for drawing.
It has volume, power and charging ports and buttons exposed and you can easily remove your pen. The only thing I wanted exposed was the headphone jack, but a simple hole punch fixed that. Certainly cheap enough.
Now for the warning. The stick on cases are much worse than I expected. They are stuck on pretty much permanently, so switching cases for different activities was not possible. I do that to have a keyboard sometimes. Now the really bad part, the adhesive is strong enough that you can separate the back from the tablet if you are not careful.
I did just that. Nothing breaks, the back of the tablet it's very flexible, but it is a real bear to get back together. Let's just say I know more about the inside off the tab than I would want to this stage in the warranty.
Sent from my GT-N8000 using Tapatalk HD
deecee52 said:
As in update: I received a very cheap trifold magnetic cover that I ordered off of eBay similar to this. http://item.mobileweb.ebay.com/viewitem?itemId=200899933118&index=6&nav=SEARCH&nid=87359384600
So far it is working fine. It has magnets to keep closed and my pen works fine for drawing.
It has volume, peer ands charging exposed ands you can easily remove your own. The only thing I wanted exposed was the headphone jack, but a simple hole punch fixed that. Certainly cheap enough.
Now for the warning. The stick on cases are much worse than I expected. They are stuck on pretty much permanently, so switching cases for different activities was not possible. I do that to have a keyboard sometimes. Now the really bad part, the adhesive is strong enough that you can separate the back from the tablet off you are not careful.
I did just that. Nothing breaks, the back of the tablet it's very flexible, but it is a real bear to get back together. Let's just say I know more about the inside off the tab than I would want to this stage in the warranty.
Sent from my GT-N8000 using Tapatalk HD
Click to expand...
Click to collapse
Can you post some pics with the case
Only want to protect the front, something like the iPad smart cover that hook onto the side. I have a skin behind so i don't want to block it with a case
self-deleted
i don't drop stuff . nvm i got my answer somewhere else
/close
Did you find one?
Sent from my Nexus 7 using Tapatalk 2
unciviilized said:
Did you find one?
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
I would also like to know!
Me too!
Sent from my Nexus 7 using Tapatalk 4
bump..
I'm also looking for something similar. Either something just for the front or something thin/clear on the back. What is the slimmest case/cover available for decently cheap? Not really worried about dropping it; just want something to protect it inside of a coat pocket and looks decent
I don't think he's gonna tell us lol
Sent from my Nexus 7 using Tapatalk 4
mixalot2008 said:
I don't think he's gonna tell us lol
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
sharing is caring :good:
i have been looking for this type of case but all i see is leather ones
The official Premium Case or Poetic Slimline case are probably the closest you'll get. The latter is my preference.
I'm surprised no manufacturer has worked out a way to adhesively attach a screen cover like the Slimline's onto the edge of the tablet, you'd just need a moulded plastic strip to run down the left edge of the machine covered with some non-permanent adhesive a la the Dodocase that the actual cover was attached to. Then you'd have something that works a bit like the iPad smartcase without the magnets.
hyperspacey said:
The official Premium Case or Poetic Slimline case are probably the closest you'll get. The latter is my preference.
I'm surprised no manufacturer has worked out a way to adhesively attach a screen cover like the Slimline's onto the edge of the tablet, you'd just need a moulded plastic strip to run down the left edge of the machine covered with some non-permanent adhesive a la the Dodocase that the actual cover was attached to. Then you'd have something that works a bit like the iPad smartcase without the magnets.
Click to expand...
Click to collapse
The poetic slimline is still too bulky for me. It essentially triples the thickness with that extra back layer plus it hides skins.
I too am surprised; it seems fairly straightforward to make...
hyperspacey said:
I'm surprised no manufacturer has worked out a way to adhesively attach a screen cover like the Slimline's onto the edge of the tablet, you'd just need a moulded plastic strip to run down the left edge of the machine covered with some non-permanent adhesive a la the Dodocase that the actual cover was attached to. Then you'd have something that works a bit like the iPad smartcase without the magnets.
Click to expand...
Click to collapse
Thats a pretty good idea. The only thing could be tricky is the magnets hold the cover down on the iPad.
This is the only case I've seen which has a "transparent" back.
I've not seen it in the flesh, so I don't how how good they are, or if they can be shipped overseas.
endlesstrail said:
This is the only case I've seen which has a "transparent" back.
I've not seen it in the flesh, so I don't how how good they are, or if they can be shipped overseas.
Click to expand...
Click to collapse
It seems more white or translucent than clear. Are there any cases out there that just cover the front? (Like a keyboard case just without the keyboard so it's essentially just a plastic cover) Or maybe something like what Logitech has for their keyboards where it covers the device but when removed can act as a stand.
Mokocase is nice
Johnny_Fever said:
Mokocase is nice
Click to expand...
Click to collapse
Got that one as well. Like it very much
sen-cha said:
Thats a pretty good idea. The only thing could be tricky is the magnets hold the cover down on the iPad.
Click to expand...
Click to collapse
Not to mention that Apple patented the magnetic latching mechanism that holds the cover on, so any other cover like that (with no back) would need to either find an alternative method (like the adhesive mentioned above) or license the technology from Apple. Or just do it and wait to get sued...
I bought the rooCASE Origami case from Amazon - http://www.amazon.com/rooCASE-Google-Tablet-Origami-SlimShell/dp/B00ET9H588
It's thin enough and functions very much like the iPad Smart Cover, with the additional benefit of allowing the N7 to stand on portrait mode.
The biggest problem: for landscape mode, where you fold the front cover just like the iPad, the magnet in the front cover WILL turn OFF the Nexus 7. I asked for a replacment form the seller (she said it's defective), but the replacement did the same thing.
I was wondering if anyone had thoughts or has even tried these types of car mounts.
http://www.ebay.com/itm/Nexcon-Magn...lde-/221655676812?hash=item339bb5378c&vxp=mtr
Its magnetic so I was wondering if people thought our Nexus 5 would work with it without the metal plate they supply. Seeing as the Nexus 5 has magnets in it's back I would think the only question is if the magnets used are attracted to the ones in the Nexus 5 and the placement of the magnets. I may get one to try out but I wanted to see people's thoughts anyway.
Well as far as I am informed and seen, inside your nexus 5 are metal discs not magnets, the magnets comes in the original nexus 5 wireless charger. Hope this make it more clear, and I think they made it a bit vague so you would get it then they would simply tells you to get their magmatic cover !!!
ahmad shishani said:
Well as far as I am informed and seen, inside your nexus 5 are metal discs not magnets, the magnets comes in the original nexus 5 wireless charger. Hope this make it more clear, and I think they made it a bit vague so you would get it then they would simply tells you to get their magmatic cover !!!
Click to expand...
Click to collapse
I wasn't sure if inside the Nexus 5 are magnets or, as you say, metal disks. I know my old Palm Pre had magnets in the back of the phone for it's TouchStone charger. I actually have two of those. And the Nexus 5 actually connects with that really well. Almost like it was made for it. If these docks are similar to what the TouchStone charger is as far as magnet placement, it should work really well without that metal plate they give you. But the plate does come with it to use with a phone case just in case. So I may just put down the 10 bucks or so and see how it goes.
Cool let me know what turns out, I may kick one too off ebay
I have this one in my car http://www.amazon.com/InfiniApps-Smartphones-Cradle-less-Quick-snap-technology/dp/B00DPMNNUO/ref=sr_1_38?ie=UTF8&qid=1427845784&sr=8-38&keywords=magnetic+car+mount
It works very well, and the phone stays locked in place. It attaches to the 4 metal plates in the back cover of the Nexus 5 meant for the official Qi charger. You can't use a case though, or the magnets won't be strong enough to hold. If you do use a case (thin TPU or thin hard case only) then you will need the metal plate insert for it to work. But even still, the phone sticks way better without a case. It sticks best in vertical position, if you do landscape it needs to be centered perfectly or it will start to twist back to vertical over big bumps, it won't come off, but it will turn.
I use an nGroove Snap (http://www.amazon.com/Mountek-nGroove-Magnetic-Smartphones-Tablets/dp/B00HMDYH2U) and it works just fine even without the metal plate.
DosNexus said:
I have this one in my car http://www.amazon.com/InfiniApps-Smartphones-Cradle-less-Quick-snap-technology/dp/B00DPMNNUO/ref=sr_1_38?ie=UTF8&qid=1427845784&sr=8-38&keywords=magnetic+car+mount
It works very well, and the phone stays locked in place. It attaches to the 4 metal plates in the back cover of the Nexus 5 meant for the official Qi charger. You can't use a case though, or the magnets won't be strong enough to hold. If you do use a case (thin TPU or thin hard case only) then you will need the metal plate insert for it to work. But even still, the phone sticks way better without a case. It sticks best in vertical position, if you do landscape it needs to be centered perfectly or it will start to twist back to vertical over big bumps, it won't come off, but it will turn.
Click to expand...
Click to collapse
rpr69 said:
I use an nGroove Snap (http://www.amazon.com/Mountek-nGroove-Magnetic-Smartphones-Tablets/dp/B00HMDYH2U) and it works just fine even without the metal plate.
Click to expand...
Click to collapse
Good to know that these do in fact work without those metal plates. I thought they'd might but thanks for confirming it. I don't use a case so it should be perfect for me. I'll definitely be getting one now.
Made my own car charger. Too bad my Spigen case is too thick, so can't use it. Or I just have to risk breaking my phone by not using the case..... Dilemma...
I use kenu airframe + google Nexus qi charger = perfect solution.
I ended up buying this one and it works perfectly.
http://www.ebay.com/itm/381075023900?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT
Do you need to use the included magnetic stickers? Or will it lock to the magnets inside the phone?
JaymzTA said:
Do you need to use the included magnetic stickers? Or will it lock to the magnets inside the phone?
Click to expand...
Click to collapse
Nope. It works as is. And it works nicely too. If the next Nexus doesn't have magnets, I'm going to be sad.
I have another mount, I believe it's called "iMagnet" which is almost identical. After using it for the past year with my nexus 5, I have some gripes about it. It's not an incredibly solid grip, which means every bump is going to make your phone start rotating one way or the other. I like to place my phone in landscape mode but since it's in landscape mode, the phone will twist on the mount until it's touching the dash. I'll periodically move the phone back to the center of the mount while I'm driving which probably isn't safe. Ive used my phone with cases, without cases, with dbrand skins, without. The official Google "bumper" and my spigen neo hybrid are both too thick for the mount to have a good hold, so it really slides all over the place. Using a skin, doesn't affect it too much though. If I were to get another car mount I wouldn't get one of these. It's not horrible, but it just gets annoying.
Sent from my Nexus 5 using XDA Free mobile app
jsgraphicart said:
Nope. It works as is. And it works nicely too. If the next Nexus doesn't have magnets, I'm going to be sad.
Click to expand...
Click to collapse
On your recommendation I just ordered one from amazon
JaymzTA said:
On your recommendation I just ordered one from amazon
Click to expand...
Click to collapse
I think you'll be happy with it
I have one, and I love it. I've got one of the slim Spigen cases and I put one of the metal plates between the phone and the case. I had to play with the position to make sure I could still use NFC, Qi charging, and GPS worked fine.
Now I feel super confident in my purchase. Thanks guys!
I've been happy with this one from amazon http://www.amazon.com/gp/product/B00V54LQO4?psc=1&redirect=true&ref_=oh_aui_detailpage_o04_s00 only $10.99.
jsgraphicart said:
I think you'll be happy with it
Click to expand...
Click to collapse
I just received it in the mail, and the build quality seems pretty good. I just had neck surgery the other day, so I won't be able to use it for at least a few weeks. I can't wait to try it out!