Dualshock 3: Is rooting REALLY mandatory? - Nexus 7 (2013) Accessories

I'm gonna buy a Nexus 7 (2013) tomorrow, the Wi-Fi only model, and I'm pretty excited because I'm looking foward to making that my ultimate emulation machine and, of course, a good joystick is needed for that.
The thing is, I scavenged around google and this very forum, but I couldn't find anything that answers my question, and if it did, well it was about another tablet: is rooting really required for a Dualshock 3?
I'm a total noob in this, I know there is a full guide to rooting this device but I'd really prefer not to. I don't even need a custom rom, I'm perfectly fine with the default. I know there is an app in the Play Store but it requires rooting, and I read in some place that rooting is needed only if you want to connect it via bluetooth, in an other place it says not, in another video I see somebody just linking it with usb OTG and playing...
So how can I connect without rooting? Even if I have to keep it linked to the OTG, I just want to know the very basic way to use a Dualshock 3 on a default Nexus 7 (2013).
Thanks in advance.
PS I really don't need support for Android games, as I said I'll use it just for emulation. And I'm writing this in the accessories section because I saw another thread about the Dualshock 3 in the Accessories forum (of another tablet of course), is it ok?

The only app i've seen use it is sixaxis. It requires rooting as far as i know.
But i have to ask, why the hesitation to rooting to begin with?

hypergreatthing said:
The only app i've seen use it is sixaxis. It requires rooting as far as i know.
But i have to ask, why the hesitation to rooting to begin with?
Click to expand...
Click to collapse
Because I need this tablet for school too, I keep there my school books, so I'm paying half of it while my parents pay the other half. So, I can't really risk doing something that would remove my warranty. Of course, I can tell'em nothing about rooting, but what if I need to repair the tablet? I'm taking it to school everyday after all, that isn't exactly a church.
Then it seems like a long thing to do that I don't even need, and I always end up screwing something up during these things, so I don't wanna risk bricking it either.
Finally, I know I'd lose everything if I root, I know it's fresh out of shop, but I don't even want to bother about re-installing the basic things: I don't even know how much of that is removed anyway, so I don't certainly want to end up searching drivers or something.

This might work too, although I've no experience with it:
(I tried to post the link, but don't have enough posts to do so)
Go to the Play store and search on Sixaxis Enabler

guagnedb careless
jwats01 said:
This might work too, although I've no experience with it:
(I tried to post the link, but don't have enough posts to do so)
Go to the Play store and search on Sixaxis Enabler
Click to expand...
Click to collapse
That's the thing we were talking about, it requires rooting. It even says so in the description.

If you just use the PS3 controller connected to a OTG cable then you don't need to root. If you want to use it via bluetooth you need to root. There are quite a few all in one kits that can root your device for you easily but if you're not comfortable then use OTG cable or buy something like the Moga where you don't need to root.

biggiestuff said:
If you just use the PS3 controller connected to a OTG cable then you don't need to root. If you want to use it via bluetooth you need to root. There are quite a few all in one kits that can root your device for you easily but if you're not comfortable then use OTG cable or buy something like the Moga where you don't need to root.
Click to expand...
Click to collapse
Rooting only voids your warranty if ASUS finds out. Which they won't. Just use Wugs Toolkit or something to root it, then if you need repairs hook it up and return it to stock the same way(you can do this even without the screen being on if it is broken). Or as posted above use a wired XBOX 360/PS3 controller, and look lamer but stay stock

Thanks i bought the tablet. i have another question, what kind of otg is compatible? I saw some at the ludicrous price of ten euros, the shopkeeeper even said otg aren't compatible with tablet (so yeah he was pretty clueless)

Just simply use a OTG cable like this one: http://www.amazon.com/eForCity-Micr...UTF8&qid=1377771242&sr=8-3&keywords=otg+cable and connect your PS3 controller with the ps3 usb cord to it.
Heres another link that helps explain it: http://www.realdroidgaming.com/2013/03/09/how-to-use-a-dualshock3-with-an-android-device/

cloudropis said:
That's the thing we were talking about, it requires rooting. It even says so in the description.
Click to expand...
Click to collapse
This is actually not what you are referring to, which is why I posted it. Straight from the description of Sixaxis Enabler:
Many Android devices support connecting PS3 DualShock 3/Sixaxis Controller natively in wired mode but don't work out of box, this app come to help. NO ROOT, NO PAIRING, all you need is an Android device which supports USB Host, and connection cable (USB OTG cable is needed if your device doesn't have built-in USB Host port).
I believe you were referring to the Sixaxis Controller app, which does require root, as the description says.

jwats01 said:
This is actually not what you are referring to, which is why I posted it. Straight from the description of Sixaxis Enabler:
Many Android devices support connecting PS3 DualShock 3/Sixaxis Controller natively in wired mode but don't work out of box, this app come to help. NO ROOT, NO PAIRING, all you need is an Android device which supports USB Host, and connection cable (USB OTG cable is needed if your device doesn't have built-in USB Host port).
I believe you were referring to the Sixaxis Controller app, which does require root, as the description says.
Click to expand...
Click to collapse
I totally didn't sede that, I thought you ere talking of tue sixaxis Controller app ad you said. Sorry for me being rude, I'm sorry.
Anyway bought the OTG the controller works with no problems. At first it didn't work with android games, but I just had to edit the game, and now Dead Trigger seems like a decent game :V
Thanks for the help guys!

cloudropis said:
At first it didn't work with android games, but I just had to edit the game, and now Dead Trigger seems like a decent game :V
Click to expand...
Click to collapse
What do you mean by "edit the game"? What did you have to do?

i connected the DS3 via otg cable, do i need another app for the nexus 7 to detect it? i think it moves some of the icons on my home screen, i tried one game and it doesn't work air attack hd SHOOTING game
the 4 redlights on the DS3 are flashing on off tho

Caelrie said:
What do you mean by "edit the game"? What did you have to do?
Click to expand...
Click to collapse
I mean that I hadn't disabled auto-correction yet. I meant Exit, lol.
And cobyman, not every android game supports gamepad. You can move the cursor in the home and the four lights are flashing? Then it's working, now you can only hope that the games you want support it.

Rooting is nothing more then and administrator account with admin privileges. I don't know why some people freak out about this stuff. Its reversible and you can always flash a stock image to go back to 100% stock.
Sent from my Nexus 7 using XDA Premium 4 mobile app

Is anyone using the Sixaxis app on the new Q release wirelessly? Mine worked on J but now it won't see the controller.

Related

PS3 controller possible?

Would it be possible to link a PS3 controller to our phone? The only problem I could see would be linking them up... But it would be badass for emulators!
I'm breathing life back into any old thread I can find that has this question. I just got the EVO 3D and once my mhl cable comes, I'm gonna be rockin the emulator over HDMI to my tv, and would LOVE to be able to just use my PS3 controller. We need to get on this STAT.
I'm willing to help in any way possible.
just use a emulator and download the Ps3 drivers to your pc,then if you have a pc with HDMI you can connect it to your TV.....why would you use your phone when you can run any kind of console with your pc...lol
WONGLONGSOOK said:
just use a emulator and download the Ps3 drivers to your pc,then if you have a pc with HDMI you can connect it to your TV.....why would you use your phone when you can run any kind of console with your pc...lol
Click to expand...
Click to collapse
Because I can't take my PC with me anywhere I go...
If I could do it through the phone I could play on my TV while I'm home, but also on the go anywhere that I have my phone, without having to export/import save files or play two separate games.
well...you will have to use bluetooth to connect the controller to your phone,the phone can't power that device on usb....
http://www.evo4gforum.net/htc-evo-4...n-we-get-the-wiimote-ps3-controller-to-work!/
sorry,but the only thing I can find is for the WII....
WONGLONGSOOK said:
well...you will have to use bluetooth to connect the controller to your phone,the phone can't power that device on usb....
Click to expand...
Click to collapse
Yeah, that's the plan. Hoping to somehow link the controller for use with the phone. PS3 is tricky though because it requires a USB connection to a device in order to pair with it. I'm hoping to use a PC as an intermediary to 'introduce' them to each other and then it should (in theory) just be a matter of collecting/interpreting button press data and mapping it to the correct buttons in the phones emulator.
kinda old but has to be a way for Android.. http://www.youtube.com/watch?v=mH_NBKtj0R8
WONGLONGSOOK said:
kinda old but has to be a way for Android.. http://www.youtube.com/watch?v=mH_NBKtj0R8
Click to expand...
Click to collapse
I'll check this out on my lunch. Thanks!
You are out of luck when trying to pair PS3 controller to Android. Can't be done at the moment.
Best bet is still the Wii remote (can use the classic controller as well) or purchasing a special type bluetooth gamepad off the net (just search Google and there are a few to choose from that do work well).
CCallahan said:
You are out of luck when trying to pair PS3 controller to Android. Can't be done at the moment.
Best bet is still the Wii remote (can use the classic controller as well) or purchasing a special type bluetooth gamepad off the net (just search Google and there are a few to choose from that do work well).
Click to expand...
Click to collapse
I'm sorry, but I refuse to believe that two bluetooth devices based on Linux can't somehow be paired. Maybe extra hardware needs to be introduced, and there'll probably be some reverse engineering involved, but if they can connect a wiimote to Android, and a ps3 controller to a windows phone, there has to be a way to make this work...
CCallahan said:
You are out of luck when trying to pair PS3 controller to Android. Can't be done at the moment.
Best bet is still the Wii remote (can use the classic controller as well) or purchasing a special type bluetooth gamepad off the net (just search Google and there are a few to choose from that do work well).
Click to expand...
Click to collapse
It may not be able to be done with the EVO yet but it can be done. I've done it natively on my Xoom with emulators many times.
http://www.androidcentral.com/using-ps3-controller-motorola-xoom
merak69 said:
It may not be able to be done with the EVO yet but it can be done. I've done it natively on my Xoom with emulators many times.
http://www.androidcentral.com/using-ps3-controller-motorola-xoom
Click to expand...
Click to collapse
That's awesome. That's the kind of encouraging thing that makes me believe this can be done. Perhaps there's a way to force the pairing with one of those cables and then wirelessly sync from that point on. Were you able to try that at all with the Xoom?
merak69 said:
It may not be able to be done with the EVO yet but it can be done. I've done it natively on my Xoom with emulators many times.
http://www.androidcentral.com/using-ps3-controller-motorola-xoom
Click to expand...
Click to collapse
you're doing it with a cable though, so at that point its just a standard usb input device.
danialhanson said:
I'm breathing life back into any old thread I can find that has this question. I just got the EVO 3D and once my mhl cable comes, I'm gonna be rockin the emulator over HDMI to my tv, and would LOVE to be able to just use my PS3 controller. We need to get on this STAT.
I'm willing to help in any way possible.
Click to expand...
Click to collapse
How about just playing the games that you already have on available on your phone. I don't see this ever working especially with sonys ****ty products.
this is also why I have all manner of game systems and PCs hooked up to my tvs/projectors:
I like being able to take phone calls or respond to text messages without having to exit my game....lol
deathsled said:
this is also why I have all manner of game systems and PCs hooked up to my tvs/projectors:
I like being able to take phone calls or respond to text messages without having to exit my game....lol
Click to expand...
Click to collapse
True but I like the idea of taking the game WITH me so if I'm stuck somewhere bored with nothing to do I can pick up where I left off.
danialhanson said:
I'm sorry, but I refuse to believe that two bluetooth devices based on Linux can't somehow be paired. Maybe extra hardware needs to be introduced, and there'll probably be some reverse engineering involved, but if they can connect a wiimote to Android, and a ps3 controller to a windows phone, there has to be a way to make this work...
Click to expand...
Click to collapse
Pretty much I heard it comes down to being able to pair the thing with the phone. Maybe drivers too.
I'd say that, at least from a hardware perspective, all you should need is a wire that would plug into both of them. Haven't the slightest idea what you'd need from the software side though.
deathsled said:
you're doing it with a cable though, so at that point its just a standard usb input device.
Click to expand...
Click to collapse
You have to use a cable. The ps3 controller may be Bluetooth but it uses a non standard protocol, rendering it completely incompatible with our evo's Bluetooth stack. People had to write custom drivers from the ground up to get the ps3 controller to work on the PC, but that jacks up your ability to use other normal Bluetooth functions (at least the last time I tried a month or two ago, it still did).
Sent from my Xoom using XDA Premium App
danialhanson said:
I'm breathing life back into any old thread I can find that has this question. I just got the EVO 3D and once my mhl cable comes, I'm gonna be rockin the emulator over HDMI to my tv, and would LOVE to be able to just use my PS3 controller. We need to get on this STAT.
I'm willing to help in any way possible.
Click to expand...
Click to collapse
Instead of necroing a thread in the Evo 4G forums, how about posting this in the Evo 3D forums. I mean, that is the phone you have. Just sayin'.

PS3 Controller Questions

Hi
I have a completely stock galaxy note running ICS (no root)
I picked up a PS3 controller yesterday from a boot sale for £8 (Sixaxis Dualshock 3) - i got it on a bit of a whim after vaguely seeing mentions of ps3 controllers working with android mentioned on here.
I have it working using my usb OTG cable.
I have a few questions and was hoping someone could help me
1. Is it possible to use the PS3 controller wirelessly without root? I have seen the sixaxis app and where it says it needs root but have also seen "USB/BT Joystick Center " which claims to not require root but cannot see people with our phone using it anywhere.
2. Is it possible to get an OTG cable that allows you to use devices such as the ps3 controller and charge the phone at the same time?
3. [Off-Topic] Since I dont have a ps3 - is there anyway to tell if the wireless portion of a ps3 controller is working? when the controller is disconnected I don't see any LEDs lit no matter what I press. Any ideas?
Thank you
Lrmulli
lrmulli said:
1. Is it possible to use the PS3 controller wirelessly without root? I have seen the sixaxis app and where it says it needs root but have also seen "USB/BT Joystick Center " which claims to not require root but cannot see people with our phone using it anywhere.
2. Is it possible to get an OTG cable that allows you to use devices such as the ps3 controller and charge the phone at the same time?
3. [Off-Topic] Since I dont have a ps3 - is there anyway to tell if the wireless portion of a ps3 controller is working? when the controller is disconnected I don't see any LEDs lit no matter what I press. Any ideas?
Click to expand...
Click to collapse
1. I never heard about this options. You can buy bluetooth joystick for android\ios and use it without root.
2. No. Also there is no cables for using HDMI+OTG same time.
Why you are afraid of root? You can always unroot and back to stock without problems. You can also reset your flashing counter to zero and stock official samsung (if you need to sold your device or bring it to service center).
anonymous572 said:
1. I never heard about this options. You can buy bluetooth joystick for android\ios and use it without root.
2. No. Also there is no cables for using HDMI+OTG same time.
Why you are afraid of root? You can always unroot and back to stock without problems. You can also reset your flashing counter to zero and stock official samsung (if you need to sold your device or bring it to service center).
Click to expand...
Click to collapse
Here's what you need:
CM9 ROM - sixaxis support without root
ANY ROM + root + sixaxis app - great support (with profiles, and multiple controllers)
There's no risk or rooting your device if its just root. Just apply it as per the instructions of the developers.
1) I don't know the answer to that.
2) Yes you can. Get a USB-OTG cable. Then plug it into a USB-HUD, it will need to be externally charged via charger. Now your NOTE is getting Data only from the Gamepad, and it isn't wasting power for the connection.
Anonymous is right, you can't have OTG and MHL at the same time.
The best solution for you to is:
root + sixaxis + bluetooth connection + mhl=hdmi If you want BIG SCREEN gameplay.
3) You could have a Chinese clone controller, which might NOT have bluetooth.
Quickest way would be to try pairing it to your PC. If discoverable, then obviously its got the blue teeth, though it could still be chinese knock off.
@anonymous572 & @Kangal Thanks for the great replies
@anonymous572 I'm not so afraid of root - I'm more afraid of bricking - I have rooted & flashed every android device I have ever owned apart from my note and the reason is that I am scared of bricking. With the bricking issue seemingly so random I'm scared that if it hit me I would be without warranty. Admittedly though I have done any reading for a while about whether rooting increases the chances of bricking or not. Am I worrying about nothing?
@kangal great tip about the powered usb hub - I'll have a look at whether I have any in the house to try.
I might order an MHL cable for some big screen action aswell - especially as XBMC is now working on our devices.
I'm pretty certain my controller is not a clone - the person selling it at the boot sale was selling it with the console and I managed to persuade him to sell it me separately.
root + sixaxis + bluetooth connection + mhl=hdmi If you want BIG SCREEN gameplay. >> This solution sounds great - I've just got to convince myself to root and spend the money on the sixaxis app
Thank You

Bluetooth Dualshock 3 PS3 controller?

Anyone try and connect a DS3 to the G3? Just checking before I go through the hassle of the setup itself, it was a massive pain in the butt on my M7 and I want to play emulators on the go and be able to actually play mobile games comfortably on this beautiful screen.
Bump.
PapaRhino said:
Bump.
Click to expand...
Click to collapse
Interested in this as well.
Just get sixaxis controller from the playstore
Sent from my LG-D851 using XDA Premium 4 mobile app
We're asking if it works and connects properly...not every phone is compatible with it. HTC devices are a huge pain in the ass for instance.
Yes it does work with it on Bluetooth if you are rooted. here is the link for the GameKlip™ - Universal CaseMount http://buy.thegameklip.com/products/gameklip-casemount. As long as you have a case to mount too it.
Guys i have a G3 and i tried to hook a ps3 controller to it but either the phone or the controller wont read eachother cause it never lights up with an OTG cable ive tried 2 different controllers and still the same result and yes my G3 is rooted cause i knew i may need root but it never reads the controller please help

[Q] Gamepad, game controller

Anyone tried to setup a controller on the tablet? I just purchased a moga power pro controller but I wa unable to set it up. It is workig fine with my S4 and the bluetooth works on the tablet becase I managed to connect the phone to the tablet via bluetooth.
Does anyone know how to setup the controller or becase it is a 3rd party device the access blocked?
shadow78 said:
Anyone tried to setup a controller on the tablet? I just purchased a moga power pro controller but I wa unable to set it up. It is workig fine with my S4 and the bluetooth works on the tablet becase I managed to connect the phone to the tablet via bluetooth.
Does anyone know how to setup the controller or becase it is a 3rd party device the access blocked?
Click to expand...
Click to collapse
Are you just trying to connect via bluetooth? I haven't done this in a long time (way back on my Xoom) but I thought you needed a 3rd party app and Root access to link them.
Someone confirm? Would love to play Soulcraft II - with a gamepad.
Ironcladz said:
Are you just trying to connect via bluetooth? I haven't done this in a long time (way back on my Xoom) but I thought you needed a 3rd party app and Root access to link them.
Someone confirm? Would love to play Soulcraft II - with a gamepad.
Click to expand...
Click to collapse
Moga has an app can be downloaded from the play store (moga pivot) and yes it uses bluetooth. This should work without root. If you google moga is a big name which should work on android 2.3 and above. I think the reason is samsung which is now blocking all 3rd part devices from 4.4.2 but I am not sure. I think the only option left is the samsung gamepad..
Not for $100 bucks. That's plain crazy
I use an OTG cable and PS4 controller.
HughesNet said:
I use an OTG cable and PS4 controller.
Click to expand...
Click to collapse
Any app needed to link them?
HughesNet said:
I use an OTG cable and PS4 controller.
Click to expand...
Click to collapse
Have you rooted? or the device just support it?
shadow78 said:
Have you rooted? or the device just support it?
Click to expand...
Click to collapse
It just supports it. Yes I have rooted but I have 3 Tab Pros as well that are not rooted and it works just fine on them as well. It also worked on my Tab S before I rooted. OTG is always supported on android devices.
HughesNet said:
It just supports it. Yes I have rooted but I have 3 Tab Pros as well that are not rooted and it works just fine on them as well. It also worked on my Tab S before I rooted. OTG is always supported on android devices.
Click to expand...
Click to collapse
Did you have to download any apps for button management?
I use my ps3 controller as gamepad with an adapter and it's working flawlessly. I've tested it with Dead Trigger 2 and Rayman Fiesta Run.
Sent from my GT-I9505G using XDA Premium 4 mobile app
If anyone gets a wired xbox controller to work, please let us know what you did. I was totally just hoping it was going to work and it doesn't. (at least for me). I just get a blinking light on the xbox controller. I have the 10.5.
I even rooted and installed USB/BT JoystickCenter Gold Demo but then that gets a 'can not get access to /dev/uinput error'
tahlsr said:
If anyone gets a wired xbox controller to work, please let us know what you did. I was totally just hoping it was going to work and it doesn't. (at least for me). I just get a blinking light on the xbox controller. I have the 10.5.
I even rooted and installed USB/BT JoystickCenter Gold Demo but then that gets a 'can not get access to /dev/uinput error'
Click to expand...
Click to collapse
try this http://forum.xda-developers.com/galaxy-tab-s/orig-development/kernel-skyhigh-tw-kernel-t2806563
Thanks so much for suggesting something but I'm too anxious to try it, since that thread says it's only for the SM-T700 (8.4") and I have the 10.5". He even specifically states it in post #3.
Kagdilag said:
try this http://forum.xda-developers.com/galaxy-tab-s/orig-development/kernel-skyhigh-tw-kernel-t2806563
Click to expand...
Click to collapse
Has anyone been able to get the sixaxis app working? I can't... I believe it has to do with a missing Samsung Bluetooth protocol in newer Samsung devices.
That was one of my main reasons for getting a tablet!
Not that it matters but I emailed Samsung support and their response: Thank you for contacting Samsung. I see that you would like to know whether Galaxy Tab S supports hooking up to a wired xbox USB controller. I do understand your concern and requirement. However, this Tablet does not support wired xbox USB controller. Unfortunately, as of now theere are no compatible controllers that use an USB OTG cable for this model from Samsung and Samsung does not have any tested results on using PS3 controller with the Tablet. I hope the above provided information address your concern.
controller recharges the tablet
is it possible to connect the controller (that has a battery pack) to the tablet and recharge the tablet?
eg. can a xbox one controller, that has a battery pack, be connected with an mhl cable/usb cable to a tablet and be used to charge the tablet? so the tablet is not drained while playing games.
(i asked this in the accessories forum too, apologies)
I use PS3 Controller wireless using Sixaxis Controller app.. For the first time setup need otg, but after pairing no need the otg . Can use wireless.
ayenzel said:
I use PS3 Controller wireless using Sixaxis Controller app.. For the first time setup need otg, but after pairing no need the otg . Can use wireless.
Click to expand...
Click to collapse
Thanks for the info! I just ordered an otg cable. Are you able to get two controllers working with the six axis app, or just one? My goal is to be able to use emulators with two Wireless PS3 controllers. Thanks!
maneetb said:
Thanks for the info! I just ordered an otg cable. Are you able to get two controllers working with the six axis app, or just one? My goal is to be able to use emulators with two Wireless PS3 controllers. Thanks!
Click to expand...
Click to collapse
if you have a computer , you can just plug the controller in and set the address for it .. no otg needed :good:
sku|| said:
if you have a computer , you can just plug the controller in and set the address for it .. no otg needed :good:
Click to expand...
Click to collapse
I tried that, but the Galaxy Tab won't find the controllers. I've set it up on multiple devices, but couldn't get it working on this one.
I read that the newer Samsung devices don't come with a Bluetooth protocol that is required for sixaxis to work... I hope I'm wrong!

[APP] [OPENSOURCE] Android TV Gamepad Touchscreen simulation No ROOT needed

I haven't posted enough to create a thread in dev forum nor putting links please if some moderator wants to move this to dev and fix the urls would be great.
I just wanted to share a project that I worked on during 2018. It allows to simulate touch events in Android TV with your gamepad (mainly for Nvidia Shield TV) and play touch based games without rooting the device. It actually needs a computer connected through ADB to work so this is another point why Shield TV is best to use because it allows ADB over wifi. You can configure several gamepad inputs that map to taps in some coordinates or 'virtual joysticks' with configurable center and radius in the screen.
It has been always open source but now I'm sharing because I don't plan to work on it anymore and I welcome anyone who wants continue the development. I wrote both user guide and developer guide on how to set it up.
github.com /Shyri/TouchMapper/wiki/User-Guide
github.com /Shyri/TouchMapper/wiki/Developer-Guide
Also I made a desktop app that would make a non-developer user easier to start the ADB process. You can find both repos here:
github.com /Shyri/TouchMapper
github.com /Shyri/TouchMapperLauncher
..that's exactly what I was searching for.... but the fact that you need a pc connected via adb all the time throws me off a bit.
So, I have 2 Questions:
My Shield is rooted using Magisk. Is there a way to use the app without the need of a pc connected via adb if it has root access? I mean could you come up with sth. like that?... probably not, since you don't plan on working on it anymore :'( . I'm no dev god, I cannot do it myself.
Second question: I got the ps4 remote play app to work on my Shield and I can stream ps4 to it. However I'm unable to connect any controller to it (all controllers that work just fine elsewhere won't work in the ps4 app). Also app has possibility to register a dualshock4 controller but that also does not work.
But the app has a touchbutton overlay! Do you think your app could work to send inputs?
Edit: Wait.....reading the mapping guide of yours, I wonder: Couldn't I do this somehow with Tasker app also?
trohn_javolta said:
..that's exactly what I was searching for.... but the fact that you need a pc connected via adb all the time throws me off a bit.
So, I have 2 Questions:
My Shield is rooted using Magisk. Is there a way to use the app without the need of a pc connected via adb if it has root access? I mean could you come up with sth. like that?... probably not, since you don't plan on working on it anymore :'( . I'm no dev god, I cannot do it myself.
Second question: I got the ps4 remote play app to work on my Shield and I can stream ps4 to it. However I'm unable to connect any controller to it (all controllers that work just fine elsewhere won't work in the ps4 app). Also app has possibility to register a dualshock4 controller but that also does not work.
But the app has a touchbutton overlay! Do you think your app could work to send inputs?
Edit: Wait.....reading the mapping guide of yours, I wonder: Couldn't I do this somehow with Tasker app also?
Click to expand...
Click to collapse
Yeah having adb connected is kind of a bummer but it is very comfortable through wifi or ethernet.
If your device is rooted you should be able to use any app in Play Store with this purpose I think.
My app is running the code in a separated process ran by adb and receiving gamepad input from the app process. I guess a modification that runs that code from the app process if root is detected would make it work without needing adb.
I don't know about the Tasker app capabilities for this purpose.
ShyriVi said:
Yeah having adb connected is kind of a bummer but it is very comfortable through wifi or ethernet.
If your device is rooted you should be able to use any app in Play Store with this purpose I think.
My app is running the code in a separated process ran by adb and receiving gamepad input from the app process. I guess a modification that runs that code from the app process if root is detected would make it work without needing adb.
I don't know about the Tasker app capabilities for this purpose.
Click to expand...
Click to collapse
I can now confirm that with root it's possible by using Tasker + AutoInput Plugin.
However it's no working solution for the ps4 remote play app The overlay of the app disappears after some time and moving the mouse it appears again, also it's disturbing.
One can register a ps4 controller in the app, which for me does not work I guess once registered the overlay disappears.
One thing I didn't try yet is the sixaxis controller app.
The idea would be then to map the ps4 controller input to a connected xbox one controller.
That's the reason I'm doing this: I want to play on my ps4 with a xbox one controller. Via win pc this seems to be possible... but I feel like it's such a waste of power..
Also there are such usb dongles that enable to do this, I should have bought one from the getgo.... But now I'm just being stubborn, I wanna make this work
Edit: Oh, forgot one thing: Do you plan on also posting this in geforce forum and r/ShieldAndroidTV subreddit? I think it would be important to have it there as well.
If you allow, I can do that and redirect any questions to this thread here, if not that's also fine. Just a thought, maybe this way you'll find someone to take over the project.
trohn_javolta said:
I can now confirm that with root it's possible by using Tasker + AutoInput Plugin.
However it's no working solution for the ps4 remote play app The overlay of the app disappears after some time and moving the mouse it appears again, also it's disturbing.
One can register a ps4 controller in the app, which for me does not work I guess once registered the overlay disappears.
One thing I didn't try yet is the sixaxis controller app.
The idea would be then to map the ps4 controller input to a connected xbox one controller.
That's the reason I'm doing this: I want to play on my ps4 with a xbox one controller. Via win pc this seems to be possible... but I feel like it's such a waste of power..
Also there are such usb dongles that enable to do this, I should have bought one from the getgo.... But now I'm just being stubborn, I wanna make this work
Edit: Oh, forgot one thing: Do you plan on also posting this in geforce forum and r/ShieldAndroidTV subreddit? I think it would be important to have it there as well.
If you allow, I can do that and redirect any questions to this thread here, if not that's also fine. Just a thought, maybe this way you'll find someone to take over the project.
Click to expand...
Click to collapse
Haha what you are trying to do is certainly waste of power, but I can understand the stubbornness to make it work, it happens to me all the time. This project is indeed the result of being stubborn and not wanting to root my shield.
In any case, what you are trying to do should be possible with my app and, as I said, I guess it wouldn't be too hard to make it work from rooted devices without having adb connected. For the moment I am very busy with other projects but I'll let you know if I can find some time to adapt it.
I'll post it to that reddit too, i already posted it to r/androidtvdev but didn't know about r/ShieldAndroidTV. Thanks!
Just to say, that tasker has an adb pluging that lets me send adb commands over tcp to the device its running on, lets me trully force close apps on a non root shield, maybe this combination of apps could do away with the pc requirement

Categories

Resources