[Q] Note 2 won't recognize any sd card - Galaxy Note II Q&A, Help & Troubleshooting

Sorry if that's been asked before, but I've really searched all over the place and couldn't fine any solution.
So, for some reason my device stopped recognizing SD cards. It used to work fine until I switched to another card (from a Galaxy S1, if that's relevant), which it didn't recognize, then switched back to my old 64GB SD card and all of a sudden it didn't recognize it as well. I mean, nothing to indicate I've just inserted a new card shows up. Not even the scanning media message or anything. It's like the device doesn't know that I insert any SD card.
I've tried anything I could think of - formatting SD card, mega wipe, flashing stock rom, flashing Philz recovery + wanamlite rom.
Nothing worked.
Thanks in advance,
I'm really at a loss

Related

SD card not Mounting Cyanogenmod

Ever since flashing cyanogenmod 6 I have been having several probelms
1. My SD card is not mounted and not recognized by anything. This is stopping me from accessing rom manager or making any changes.
I have tried several things including reformating my sd card and removing files just in case it was to full. I have not been able to figure out how to partition it to part fat32, part ext yet. I am running out of ideas and getting very frustrated with my phone. I have three sd cards to work with and none of them are recognized.
2. This would not be a problem if I could just go to stock. Unfortunately I can not get my pc to get me into recovery so I can preforma NAND backup or flash a different rom that is closer to stock. I think this may have something to do with my sd card not being recognized. I have also tried the workaround involving no pc but still am getting nothing,
3. I am also having issues with usb connectivity.
I think if i can either get my sd card mounted or my phone to enter recovery mode so I can flash another rom, add the google add on, or do a NANdroid backup it would take care of my problems. If any one has a great idea as to how to get my sd card to be recognized I feel that would solve most of my problems.
Thanks Brad
Hey I have the same problem!
Could you solved this sd card issue?
Thanks

Unavailable SD Card issue after (any) Rom Upgrade...Please help!

This is my first post, and I'm usually pretty careful about following instructions. I'm currently running Skyraider's 3.0 RC2, but to my dismay, I am finding that my phone still refuses to recognize my SD Card. Under settings it says it is unavailable, and when connected to PC, it gives an option to mount to disk but doesn't mount upon selecting this.
My phone is rooted with S-Off and 2.15 radio...Did a full wipe of everything before I flashed 3.0 RC2. Shows that my kernel is now King #2, but I have had this issue with many other roms and kernel combinations. I have been unsuccessful in finding a solution when searching the forums, and the only way to regain functionality is to restore a previous backup without any roms installed.
Any help is much appreciate. Thanks!!!
P.S. I've also tried mounting the card in clockworkmod's advanced recovery settings, but this does not change a thing. Internal storage is also currently unavailable. Mount through usb in recovery does work, but this doesn't help when I cannot access my sd card after boot.
I had a similar issue a couple days ago after upgrading from stock 2.1 to SkyRaider 2.5.2.
When I'd go to set my ringtones, the option for the SD card wasn't there. As if it wasn't reading it was in the phone at all. I opened up Astro file manager to see if it could read it and it in fact did. I could see that all the ringtones were still on the card right where they should be and they would play from Astro when I clicked on them. But, the option to actually set them still wasn't there.
I'm not exactly sure what 'fixed' it, but I went in to set my notification tone and suddenly the option to select from the SD card was there. Then, I could then access the card to set ringers as well. I'm sorry I don't have anything more specific. The card just seemed to suddenly decide to let the OS know it was there. I also rebooted the phone a couple times as well as removing the card while the phone was in use and reinserting it. Not sure if any of that helped the situation or not.
I had asked about this in two separate threads and not one person responded, so I'm guessing the issue is rare.
If you don't get anywhere with it, maybe try a different SD card just to see if it shows up.
Good luck.
I've had the same issue but was able to resolve it. Mount the sd card from a laptop or PC. If you can read the card copy the contents onto the PC (I placed mine in a separate folder). Then go into tools and do an error checking. After replacing the SD card back in the phone see if everything is ok. this fixed my SD card. However, I've had the SD card lose its primary disk notation so I had to reformat and then transfer the previous save files on the SD card from my backup an that solved my other issue. Also, some times the SD card speed can cause this issue and it is perfered that you a class 4 or better. I hope this helps.
Well, I took your advice and pulled the sd card only to mount it separately and scan it for errors. None were found. I've also reformatted and restored all the files that were on it. Phone still does not recognize card or internal storage. My phone did, however, recognize another card I had on hand and I believe it may be a compatibility issue between my 8 Gb A-Data brand Micro SD card and 2.2 roms. FYI...It's a class 6, and the one I tried that was recognized was a 6gb sandisk (class 4). I'll look into getting a 16 or 32 gig sandisk in the near future and keep you posted. Thank you guys for your insight.
always 'safely remove hardware' (stop the device, etc.) from your windows machine before unplugging your incredible
if you don't, you end up not being able to see the SD card until you restart your phone
Just reformatted my SD card, checked for errors after unmounting etc... and now it seems to work ok, although one of the music players I normally use doesn't seem to recognise it!!

[Q] CyanogenMod 7 is ruining my SD cards

Now I'm not moaning about CyanogenMod here, I'm just trying to understand how I can fix the issue.
Basically, I had CyanogenMod 7 RC2 on my Desire Z. That was it.
Eventually I saw through ROM Manager that the full release of 7 was out so I downloaded, took a backup, wiped everything and did a fresh install of the new ROM.
It installed fine, but none of my apps that needed root access were getting it.
So I booted into recovery, restored my backup, root was back.
I then installed 7.0 over my RC2. That worked fine, but again root was gone.
At this point, my phone started damaging SD cards.
It suddenly started saying that my 8GB card that came with the phone was damaged. I tried to fix it on the phone, but it just said 'Checking card' and then giving up.
Putting it in an old MP3 player, it is not detected at all.
Putting it in a card reader, the card is unreadable and when I try to format it Windows says the card is 'read only' (this is not due to the reader).
I put a functional 2gb card I had lying around into my Desire Z and it broke it in the exact same way.
My question to you guys is - what could be causing this and how do I fix it because I have a 16gb card coming and I'm obviously cautious of putting it in the phone.
Also, how would I go about flashing the new Cyanogenmod 7.02 ROM if my phone keeps breaking SD cards I put into it?
This error can be because when ever you install a CyanogenMod ROM over another, It leaves files your new ROM think is useful such as data that the new ROM doesn't support. It is damaging your SD Card because it keeps attempting to fix the error but is making it worst by trying to remove system files. Your best bet is to try another ROM and see if it does the same thing and report it to CyanogenMod Developer Team if it only does this to CyanogenMod ROMs otherwise it would be just a virus on your SD Card feeding off of personal data. If it is only CyanogenMod ROMs, we will adress this issue ASAP. Hope I helped
Thank you VS4, you are indeed helpful
I've since heard some people have managed to fix their SD cards by formatting them in ClockworkMod but I can't even mount it first in order to do this! Is my card truly dead?
Also, do you think the reason that CM7.0 had no root (even when it was a clean install) was due to me not 'fixing permissions'?
Thanks
Just a note to say that I've managed to fix it!
Despite being unable to 'mount sdcard' in clockworkmod, I found I was able to activate USB Storage and through this I was able to format the card (Windows 7 was previously saying that the same card was 'read only' in a multitude of card readers).
I hope this helps any poor chap with the same problem.
I had this exact same problem, munched 2 of my 8GB cards, and had a 16 on the way. I somehow fixed it before the 16 came and I've never had the issue since, glad to see an explanation of it.
Thanks, nofixio!
I had the same problem on my Samsung Fascinate with CM7. It ate my 16GB SD card to the point where the phone wouldn't recognize it, CWM wouldn't mount it, and it wouldn't show up on my computer in multiple SD readers.
I wasn't quite clear what you were suggesting when you said you were able to "activate USB Storage." I thought maybe you meant within CWM. That didn't work for me, but I was able to boot the phone up with the problem SD card in it and turn on USB storage as normal. Suddenly my computer could not only see the SD card, it could see all the files that were on it before it died! I backed everything up, formatted the card in Windows, and everything's good now. Thanks for the tip!
rfschmid said:
Thanks, nofixio!
I had the same problem on my Samsung Fascinate with CM7. It ate my 16GB SD card to the point where the phone wouldn't recognize it, CWM wouldn't mount it, and it wouldn't show up on my computer in multiple SD readers.
I wasn't quite clear what you were suggesting when you said you were able to "activate USB Storage." I thought maybe you meant within CWM. That didn't work for me, but I was able to boot the phone up with the problem SD card in it and turn on USB storage as normal. Suddenly my computer could not only see the SD card, it could see all the files that were on it before it died! I backed everything up, formatted the card in Windows, and everything's good now. Thanks for the tip!
Click to expand...
Click to collapse
how do i activate usb storage? i have several memory cards that stopped working out of no where and i have important files on them. PLEASE HELP!!!
hotboyray said:
how do i activate usb storage? i have several memory cards that stopped working out of no where and i have important files on them. PLEASE HELP!!!
Click to expand...
Click to collapse
I'm not sure why you would ask this in such an old thread but... Try just plugging it in to your computer maybe? What ROM are you on?
noneabove said:
I'm not sure why you would ask this in such an old thread but... Try just plugging it in to your computer maybe? What ROM are you on?
Click to expand...
Click to collapse
im running cm7 ... it wont read from computer. i tried several micro sd card readers. it just tells me it cant format. its just like what was mentioned before.
Weird, I've never had any problems with Cyanogen 7 roms. I've flashed one over another and had no issues at all, Mayb because I use SuperWipe before hand? Or maybe its a certain sd card issue???
Running Desire Z and Andromadus Beta 11 I had similar problem after I had applied remote wipe from Exchange (wanted to see if it works). Remote wipe worked: it destroyed contents of SD card and erased phone back to factory settings. After wipe mounting SD card failed and Andromadus seemed to be unable to format the card.
Solution: Booted phone to Clockwork recovery and applied advanced -> Partition SD Card.
Posted this on this thread since it came first when searching solution.
hotboyray said:
how do i activate usb storage? i have several memory cards that stopped working out of no where and i have important files on them. PLEASE HELP!!!
Click to expand...
Click to collapse
Go into Recovery (Clockwork), go to mounts and storage, then scroll down and it should say mount USB storage.

Cant use sd card

Hi,
Done a quick search but couldnt find anything.
Ive had a problem for awhile now where i randomly get the message, something like, sd card damaged, format now. Even though the card is not damaged - or im quite sure its not. I think its a known problem.
Ive formatted the card and still had the problems. it seemed to choose when it threw these msgs at me. So i didnt use my sd card for awhile and it has just stopped giving me the error msgs now.
Btw - its a samsung 8gb class 2 sd card that came with the device from new. Ive heard that there are some problems with samsung sd cards. can anyone confirm? Im about to buy a 16gb kingston card.
The problem i wanted to ask about is that ive just checked my settings>more>storage and at the bottom there is a greyed out section that says "Mount SD card"
"Insert SD card"
so its like its not even recognising there is a card inserted. Im sure that i used to get a few more sections - even if they are greyed out when a card is inserted.
Ive removed the card and gave the device a reboot but still the same.
Can anyone help? i dont want to buy a new SD card if i cant use it.
Thanks
Note 2 N7100
Android 4.3
Stock OS - no mods at all except swift keyboard.

[Q] Micro SD Card stopped working in everything

This may be the wrong place to ask this, and if it is, I apologize.
I also apologize for this being so long, but I wanted to include as much info as possible in case someone has a solution I haven't tried yet.
I have a Sandisk 32gb micro SD in my S3 (AT&T, rooted, running StockMOD 4.4 RC 2). The card worked perfectly fine before all of this started.
I ordered a new (generic) 64gb micro SD card through Amazon about a month ago. When I tried to copy my data to it, I got a 0x80070570 error, which seemed to point to a card defect. I sent it back, and finally got a replacement.
I unmounted the old card and put the replacement card in my S3. The new card didn't register in the phone at all.
I popped it out (the phone didn't recognize it, so I couldn't unmount it), put it in a USB card reader, and plugged it into my desktop (Windows 7 Home, 64 bit). The card said that it was formatted to FAT32. Since windows doesn't give you the ability to format to FAT32, I tried exFAT. I figured at the worst, when I put it in the phone, the phone would not recognize the file structure and give me the option to format it.
Well, a quick format didn't work (Windows said it was unable to complete it.) I tried a full format and when it got to the end, Windows said it couldn't complete that either. I put it back in my phone and it was recognized with a "blank card or unrecognized file system" error. It gave me the option to format it, so I did. After a maybe 2 seconds, the phone said it was checking the card for errors, then gave the "blank card" message again. I tried several times, but the same thing happened. I rebooted into recovery (CMW 6.0.4.7) and it seemed to show the card. I tried to format it there, but got the message "could not format /storage/sdcard1". I tried to mount it and got a "error mounting /storage/sdcard1" error.
I put the card back in the reader and my computer doesn't see anything there anymore. No drive letter. Nothing showing up in disk manager. I can't see it through diskpart's list volume or chkdsk (all run with admin privileges.) If I take the card out of the reader, the reader shows up as drive H (in all places). But once I put the card in, the drive disappears from everywhere.
So I figure I got another bum card. I put the old micro SD card back in my phone and it didn't see it. There's no message - the phone just doesn't recognize anything there. I rebooted, but still nothing. I booted into recovery and CMW doesn't see the old card, even though it worked perfectly fine up until this point. I tried wiping the cache and dalvik, but that didn't change anything. I booted without a card, inserted it, and the phone doesn't see it. I booted with the card in the phone, and it doesn't see it. I booted without a card, shut it down, inserted the cart, and rebooted, and that didn't work. The only thing I haven't tried yet is a factory rest. I put the old card in the reader and my computer doesn't see anything (just like the new one.) I tried disk manager, diskpart, chkdsk, etc. and it doesn't show up.
I tried 2 different card readers (1 USB, 1 internal) and neither reads either card. I tried 2 different micro SD to SD adapters, and neither one helps. I've tried reading the cards on 2 different computers, but neither sees either card. I found an old 2 gb micro SD card, plugged it into the USB adapter and it shows up in both computers fine. I tried both adapters and both work fine with the 2 gb. I also put the 2 gb in my phone, and it worked fine. So I think it's pretty safe to rule out an issue with the computer, the phone, the adapter, and the reader. Which leaves me with a card problem.
All of the solutions I've found online require that the computer actually assign a drive letter and see the card, even if it can't read it. I don't have that, so none of those work for me.
I get that the new card was probably a bum card. But why would my old card crap out all of a sudden? I had just taken a backup of what was on there, so it worked in the reader 30 minutes before I swapped out cards. I've inspected the contacts and they look fine to me. No scratches or crap on there.
Does anyone have any suggestions on how to get my 32 gb working again? Losing data isn't a problem, since I backed it up before I started this whole thing.
I've pretty much given up hope on the 64 gb at this point.
Really hard to say. But just a guess, maybe the card reader caused some sort of damage to the card. Would explain why both the new ones didn't work either.
Like I said though, it's purely a guess. But if windows doesn't recognize it no matter how you plug it in, I'm not sure there will be much you can do.
And just FYI, since this is a question, it should've been posted in Q&A.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Thanks, @DocHoliday77. I was afraid of that. Even though I don't see any damage it's possible something happened. I don't know.
I was just hoping that there was some kind of software that might be able to access the card without checking the file structure. Something that could format it without knowing, or caring, what was on it before.
And thanks for the heads up on where this should have been posted. Next time I'll ask my questions in Q&A.
Could be something internal that allowed too much power to the card maybe. No way of knowing that I'm aware of. There may be recovery software out there, but it may cost more than its worth or it may require special equipment. Been a long time since I've looked into that type stuff though.
Sent from my SAMSUNG-SGH-I747 using Tapatalk

Categories

Resources