Related
Hi Modders and developers! I have noticed that the kernel of hero is locked so technically overclock widget and setcpu don't work on it! I was wondering if some of you can remove the perf locks from the kernel and compile a new kernel which can be used with setcpu and overclocked to liking! I know this is hard but please give it a try! Millions of hero users will be thankful to you! Thanks!
It's been discussed many times, as I understand once 2.1 is released the kernel source will soon follow, there's no point doing the work until we have it.
Well Lox released a beta kernel a while back for 1.5 firmware rom's to do this...
It was a beta release but here is the link anyway:
http://android.modaco.com/content/htc-hero-hero-modaco-com/302182/beta-run-your-hero-at-660mhz/
Sure it was discussed there were no noticeable improvements.
maxo64 was able to tweak it to run at 528mhz with screen on and 2** with screen off! so can any one of you change those while compiling a rom?
i searched every where but the only kernels that work with setcpu and actually allow you to overtweak and down tweak are for cdma hero! CDMA! please develop one for gsm hero.....
I second your motion! Was thinking of starting a thread with the same question...Would love to be able to down tweak to 192MHz when screen is off, or maybe even lower.
Sent from my HTC Hero using Tapatalk
htb2050 said:
maxo64 was able to tweak it to run at 528mhz with screen on and 2** with screen off! so can any one of you change those while compiling a rom?
Click to expand...
Click to collapse
Hello,
setcpu and overclockwidget not work correctly, but with overclockwidget I see actual cpu freq., and if I "sleep" phone, freq. go down (24x) - if you very very quickly unlock screen, you ca see this.
I try this with VillainROM5,22 and Androbin1,111x.
htb2050 said:
Hi Modders and developers! I have noticed that the kernel of hero is locked so technically overclock widget and setcpu don't work on it! I was wondering if some of you can remove the perf locks from the kernel and compile a new kernel which can be used with setcpu and overclocked to liking! I know this is hard but please give it a try! Millions of hero users will be thankful to you! Thanks!
Click to expand...
Click to collapse
Been done in aHero http://forum.xda-developers.com/showthread.php?t=638584
Probably wont be long before it is done in others, but you may have to request it from your dev.
Hi since i am using my desire iam asking myself if there is a kernel to overclock the device more than the usual max. of 1,2 ghz which are given in the most roms and propably kernels....
In the past i hat an acer liquid which actually uses the same cpu but some sort of broken or not well done ones so itonly runs at 700 mhz but mine was actually able to up to 1,1 ghz so i think there must be at least some desire which are able to go higher than 1,2 ghz, but until now did not found a 2.3 rom or kernel which enables this.
Any one arround here who knows how to modifie a kernel to enable more frequencies?
The best I've seen so far is 1113 Mhz...but of course different Desires have different capacities. I can cook up a kernel for you with 1.2 Ghz, but you have it from me that it will simply reboot immediately!
I did some experiments with overclocking, and round about 1113 MHz was the maximum stable frequency, above my device got serious instability / freezes.
mine is running stable at 1190 mhz now but want to test where its stable but cant find a kernel for sense 3.5 which supports higher frequencies...
but as you said before every cpu is differnt maybe it can go higher
Droidzone said:
The best I've seen so far is 1113 Mhz...but of course different Desires have different capacities. I can cook up a kernel for you with 1.2 Ghz, but you have it from me that it will simply reboot immediately!
Click to expand...
Click to collapse
Sandvolds ICS goes up to 1260Mhz with SetCPU, forgot what kernel it uses.
bortak said:
Sandvolds ICS goes up to 1260Mhz with SetCPU, forgot what kernel it uses.
Click to expand...
Click to collapse
Does it just enable the freq or it actually is stable at that freq? If the latter, then I do need to have a look at the source!
Sent from my HTC Desire using Tapatalk
Droidzone said:
Does it just enable the freq or it actually is stable at that freq? If the latter, then I do need to have a look at the source!
Sent from my HTC Desire using Tapatalk
Click to expand...
Click to collapse
Err I'm not 100% sure that THAT was the actual frequency, but it was the 2nd highest setting (highest setting rebooted) and it was fairly stable. Check it out with setcpu
Try this:
http://supernova.droidzone.in/?p=1134
The last link.
Try to take it to 1.26 Ghz
Droidzone said:
Try this:
http://supernova.droidzone.in/?p=1134
The last link.
Click to expand...
Click to collapse
Are you able to add usb menu for sense 3.5 roms? Maybe also in your last stable kernel? Would be very great.
bone069 said:
Are you able to add usb menu for sense 3.5 roms? Maybe also in your last stable kernel? Would be very great.
Click to expand...
Click to collapse
I dont use that rom. Maybe if your dev can provide info about why Htc's default kernel causes that bug in his rom, then I can check it out...
Just got the following answer of Sebastiaan:
sebastiaan15 said:
i dont no what causes that bug in the sense 3.5
let him put the usbfix in
snq thit the same thing for me
Click to expand...
Click to collapse
Are you able to get this fix? Maybe in Gingercakes github. In his kernel it is working, too.
Sorry I have no experience in Linux and kernel developing so I don't know where I can find this fix to send you a link to implement it.
bone069 said:
Just got the following answer of Sebastiaan:
Are you able to get this fix? Maybe in Gingercakes github. In his kernel it is working, too.
Sorry I have no experience in Linux and kernel developing so I don't know where I can find this fix to send you a link to implement it.
Click to expand...
Click to collapse
I hope you can now understand why I dont take pains to implement this..
Droidzone said:
I hope you can now understand why I dont take pains to implement this..
Click to expand...
Click to collapse
Ok this is a pity but nothing I can change, sorry
Droidzone said:
I dont use that rom. Maybe if your dev can provide info about why Htc's default kernel causes that bug in his rom, then I can check it out...
Click to expand...
Click to collapse
Hi Droidzone,
so here it is:
USB Mount Fix
Are you able to implement this fix in your overclocked and last stable GB kernel as well?
Many thanks.
I'll see what I can do.
Ok, it's done. Remember to share the link to webpage rather than reuploading the kernels, if you want to share them..
Droidzone said:
Ok, it's done. Remember to share the link to webpage rather than reuploading the kernels, if you want to share them..
Click to expand...
Click to collapse
Yes of course. While sharing I will post the link to your webpage.
Many many thanks for your assistance!!
No problem. You did your part too. I was indeed aware of the github, but I just wanted to gauge your level of interest..
Droidzone said:
No problem. You did your part too. I was indeed aware of the github, but I just wanted to gauge your level of interest..
Click to expand...
Click to collapse
I was very interested in your kernel as per some user reports. So lets have a look how smooth it feels with the rom I am using
Thanks again
Hi,
Would this kernel work with roms like cm7 or oxygen? I currently use eviolett's manu 2.1 at 1190Mhz without any issues and would like to see if my phone perform stably at a higher speed.
Thanks for attention, hope my efforts have become a catalyst to something great
The new discussion starts at; page 6
Great one!! Thank you very much, I hope this development will benefit all of us here
Have you tried using dhd.ko from CM9, or maybe even from Cowithgun's kernel? I also have no Idea, but I'm really interested in Kernel development. Too bad I haven't got enough time to try it :|
Sent from my Modded Stock DXLA2 (Didn't have the mood to update)
dhd.ko was compiled alongside with kernel, automatically.. the only problem is to use it properly
great job! did that kernel fix "can't turn on phone while off & charging"?
IvanKurnia said:
great job! did that kernel fix "can't turn on phone while off & charging"?
Click to expand...
Click to collapse
atm no, it's almost a copy of arco's kernel and not interesting at all, i'm just at the very beginning of a work, maybe sometimes later any1 finds something to solve it
I respect your work.Thanks for your contribution .
Hey dimaka! Good news that you starting to kernel development maybe in future you can add more governors like smartassv2 or sio i/o, or maybe you can overclock/undervolt it but yeah goodluck
Sent from my GT-I8150 using Tapatalk 2
guys, if you've seen any good guides to kernel modding, let me know..
seems like smartassv2 and lulzactive governors work..
still can't make wifi working..
google can't give me any links to i\o scheduler works, strange.. OC and UV are nice ideas, noted
changed toolchain compiler from google's prebuilts (source.android.com) to DooMLoRD's ones, seems it will be nice
dimaka1256 said:
guys, if you've seen any good guides to kernel modding, let me know..
seems like smartassv2 and lulzactive governors work..
still can't make wifi working..
google can't give me any links to i\o scheduler works, strange.. OC and UV are nice ideas, noted
Click to expand...
Click to collapse
About the Wifi being broken, i'm not sure but mind trying to see if this can fix it?
Sorry if i'm unhelpful since I got no skills at all when it comes to this stuff.
whoa, a kernel developers , finally, great job man !
hope someone can implemented USB Host Driver Enabler http://forum.xda-developers.com/showthread.php?p=21503413
Groovecain said:
whoa, a kernel developers , finally, great job man !
hope someone can implemented USB Host Driver Enabler http://forum.xda-developers.com/showthread.php?p=21503413
Click to expand...
Click to collapse
Honestly i'm more eager to get this working so there are better governors for the SGW rather than spending time and effort just to have USB hosting.
Just Another★Gamer said:
About the Wifi being broken, i'm not sure but mind trying to see if this can fix it?
Click to expand...
Click to collapse
thanks, but it's not what i needed, my wifi worked nice in any others' roms, now i just get an error caused by my own kernel
Groovecain said:
whoa, a kernel developers , finally, great job man !
hope someone can implemented USB Host Driver Enabler http://forum.xda-developers.com/showthread.php?p=21503413
Click to expand...
Click to collapse
thanks) afaik absence of usb otg a hardware limitation cause or device is not a flagship samsung.. let their marketeers burn in hell..:angel:
and seems that it's not a job of an urgent priority
dimaka1256 said:
thanks, but it's not what i needed, my wifi worked nice in any others' roms, now i just get an error caused by my own kernel
Click to expand...
Click to collapse
Sorry, I guess i'll keep searching the forums to see what comes up.
I'm just wondering is it possible to view the kernel of a similar Samsung phone that has more governors and use that layout as a base for the modded arco kernel?
Just Another★Gamer said:
Sorry, I guess i'll keep searching the forums to see what comes up.
I'm just wondering is it possible to view the kernel of a similar Samsung phone that has more governors and use that layout as a base for the modded arco kernel?
Click to expand...
Click to collapse
governors are not a question, but OC\UV and other tweaks are needed..
try lurking s+ dev section, they're our main source
http://forum.xda-developers.com/forumdisplay.php?f=1270
moar teasers!
take a look on smartass governor
kernel is now empowered by linaro compiler
still waiting for some1 to help me resolve wifi issue
fixed smartassV2 problems, works nicely
also found the place to add i\o governors.. hm, the kernel has deadline, cfq, bfq, noop in sources.. strange, only bfq and noop are selectable in nofrills
have found sources of something like anticipatory.. searching further..
Wow can't wait this kernel released
Sent from my GT-I8150 using Tapatalk 2
And you can take a look here https://github.com/CastagnaIT
Credits to castagnaIT from s+ forum
Sent from my GT-I8150 using Tapatalk 2
hotheabilly said:
And you can take a look here https://github.com/CastagnaIT
Credits to castagnaIT from s+ forum
Sent from my GT-I8150 using Tapatalk 2
Click to expand...
Click to collapse
oh yes) that's what i was waiting for) thanks a lot..
hm, still have fails with smartassV2.. maybe will try to take 1 of that kernels as a base) how i like the fact that s+ and W are almost twins...
remembering about the times of cross-flashins Siemens C\ME75 and CX\M75
Just as a suggestion, ever heard of PEGASUS governor on Siyah Kernel? It's epic for battery/performance balance. Would be a dream to have it on our phone. Your work is greatly appreciated:thumbup::thumbup:
Sent From My Wonder on CyanogenMod 9
Hey, i have this problem from the begining...
So i have android version 4.2.2.
I'm running phone on franco Kernel 3.0.85 with Paranoidandroid Rom 3.56, Also i use app to OC my phone to 1,6ghz.
So everything is okay expect gaming , example when i play temple run 2 and i set on the best quality it will not run smooth you can see lags ingame and i think this phone should run it easily.
I was reading forum but i didn't found any solution for my problem, i tried to find busfreq_static with following informations :
/sys/devices/system/cpu/cpu0/cpufreq/busfreq_static
but there's no busfreq_static file when i enter to cpufreq directory , i use File Explorer just to check am i able to find busfreq_static file but i can't.
Any solution , any help would be much appreciated.
Thanks
Maybe buy a N4 or HTC One!!!
Sent from my Galaxy Nexus using xda app-developers app
wisefreakz said:
Maybe buy a N4 or HTC One!!!
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Add the Gs4 as well
wizox said:
Hey, i have this problem from the begining...
So i have android version 4.2.2.
I'm running phone on franco Kernel 3.0.85 with Paranoidandroid Rom 3.56, Also i use app to OC my phone to 1,6ghz.
So everything is okay expect gaming , example when i play temple run 2 and i set on the best quality it will not run smooth you can see lags ingame and i think this phone should run it easily.
I was reading forum but i didn't found any solution for my problem, i tried to find busfreq_static with following informations :
/sys/devices/system/cpu/cpu0/cpufreq/busfreq_static
but there's no busfreq_static file when i enter to cpufreq directory , i use File Explorer just to check am i able to find busfreq_static file but i can't.
Any solution , any help would be much appreciated.
Thanks
Click to expand...
Click to collapse
I already know you OC, but you overclock controlling voltages yourself, or rather you rely on SR to do it for you?
wisefreakz said:
Maybe buy a N4 or HTC One!!!
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Seraz007 said:
Add the Gs4 as well
Click to expand...
Click to collapse
While it may be funny, this helps nothing to the thread. Please don't offtopic. TIA.
wizox said:
Hey, i have this problem from the begining...
So i have android version 4.2.2.
I'm running phone on franco Kernel 3.0.85 with Paranoidandroid Rom 3.56, Also i use app to OC my phone to 1,6ghz.
So everything is okay expect gaming , example when i play temple run 2 and i set on the best quality it will not run smooth you can see lags ingame and i think this phone should run it easily.
I was reading forum but i didn't found any solution for my problem, i tried to find busfreq_static with following informations :
/sys/devices/system/cpu/cpu0/cpufreq/busfreq_static
but there's no busfreq_static file when i enter to cpufreq directory , i use File Explorer just to check am i able to find busfreq_static file but i can't.
Any solution , any help would be much appreciated.
Thanks
Click to expand...
Click to collapse
first, dont OC to 1.6!! the following may help you:
go to Settings and click on Developer Options and enable Force 4x MSAA. Multisample anti-aliasing (MSAA) is a technique used to improve image quality. Since the Gnex has a GPU capable of supporting MSAA. Keep in mind this will also cause your GPU to work harder and your device may get hotter and consume more power than normal. It’s also possible that all games may not support this.
beekay201 said:
I already know you OC, but you overclock controlling voltages yourself, or rather you rely on SR to do it for you?
While it may be funny, this helps nothing to the thread. Please don't offtopic. TIA.
Click to expand...
Click to collapse
I'ts not problem about OC , even if i set to 1,2ghz there are no changes , i just dont know what could be the problem , cuz the game runs smooth on other phone which is not good as this one , thats weird , im not controlling voltages , i didn't touch anything.
samersh72 said:
first, dont OC to 1.6!! the following may help you:
go to Settings and click on Developer Options and enable Force 4x MSAA. Multisample anti-aliasing (MSAA) is a technique used to improve image quality. Since the Gnex has a GPU capable of supporting MSAA. Keep in mind this will also cause your GPU to work harder and your device may get hotter and consume more power than normal. It’s also possible that all games may not support this.
Click to expand...
Click to collapse
No , it didnt help. I already tried it before , but when i Force 4x MSAA it just makes game more lagy , maybe cuz of game , anyway i gave an example Temple Run 2 , but even other 3D games are laging , why shouldnt I OC to 1.6 , could brick phone or ?
It can blow up your cat. If it's the same with 1.2GHz... Why are you OC'ing? Go do some reading on voltage control and smartreflex on 4460.
Something tells me you're forgetting basics on how to OC on this device. If you don't supply enough voltage for all the cpu steps, device will stutter and lag, might even reboot.
a maguro wrote this.
beekay201 said:
It can blow up your cat. If it's the same with 1.2GHz... Why are you OC'ing? Go do some reading on voltage control and smartreflex on 4460.
Something tells me you're forgetting basics on how to OC on this device. If you don't supply enough voltage for all the cpu steps, device will stutter and lag, might even reboot.
a maguro wrote this.
Click to expand...
Click to collapse
Well i guess i need to put higher voltage when i am OC-ing , and how much voltage should i use for 1,2ghz , default ? Or incrase to higher voltage value ? Tell me something more about it , cuz im not well informed
wizox said:
Well i guess i need to put higher voltage when i am OC-ing , and how much voltage should i use for 1,2ghz , default ? Or incrase to higher voltage value ? Tell me something more about it , cuz im not well informed
Click to expand...
Click to collapse
first thing you need to do is disable SmartReflex® across the board, so that your user-defined voltages stick.
messing with voltages is very device-specific. increment voltage by small ammounts, stress-test and use the device for a while to make sure it's stable.
have you tried running those games while running Google's stock kernel?
beekay201 said:
first thing you need to do is disable SmartReflex® across the board, so that your user-defined voltages stick.
messing with voltages is very device-specific. increment voltage by small ammounts, stress-test and use the device for a while to make sure it's stable.
have you tried running those games while running Google's stock kernel?
Click to expand...
Click to collapse
I guess that stock kernel is : JOP40C kernel ? Am i right , i didnt try that kernel , you suggest me to flash this JOP40C kernel and to try if something will be fixed ?
wizox said:
I guess that stock kernel is : JOP40C kernel ? Am i right , i didnt try that kernel , you suggest me to flash this JOP40C kernel and to try if something will be fixed ?
Click to expand...
Click to collapse
Well when i flashed this kernel , and rebooted phone it just wont pass google logo , so i decided to flash again franco kernel to get my phone to work , dont know what's the problem with flashing stock room
wizox said:
Well when i flashed this kernel , and rebooted phone it just wont pass google logo , so i decided to flash again franco kernel to get my phone to work , dont know what's the problem with flashing stock room
Click to expand...
Click to collapse
Do you even know anything about ROMs and kernels?
When I said have you tested this on stock kernel, I meant, did you try this on stock ROM, but specified kernel because, it's like, common knowledge for someone who flashes ROMs, that custom ROMs devs often alter kernel (and ramdisk) to support features on their custom roms..
Have you for example tried reflashing PA, and just PA, nothing else? Does it lag then?
Have you for example tried fully reverting back to stock? (factory images)
Why is it that you just want your games not to lag, not even trying to gain a deeper understanding about what people are telling you.
Listen, this is the last time I'm saying this:
I told you to check your voltages, since you're OC'ing, and expecting SR to do the job for you.
Test by reflashing again PA, with no custom kernel.
Test by going back to stock, through fastboot/factory images.
Temple Run 2 on best quality lags in mine too.Probably it was designed for 1080p.Just keep the graphics a little lower, doesn't affect gameplay or quality
Sent from my maguro
===>INTRODUCTION<===
This is my personal kernel based off of ASKP. I cherry-picked a lot of custom commits from many big kernels. I'm new in development, so, any help whatsoever (commits, suggestions, logs, etc etc) would be greatly appreciated
releases will be as frequent as possible, as I'm gone for 7 hours of my day during weekdays.
****FEATURES****
using A.S.K.P as the base<- you get all the features of A.S.K.P+ more
linux kernel 3.101 WITH the Con kalivas patchset for improved performance
L3 cache overclock (116MHZ)
custom RAM OC setup (333MHZ/400MHZ/466MHZ)
gpu oc interface (307/384/512)
optimized CRC32 computing algorithem
optimized square root interger library
custom voltage setup,modified by me personally taking inspiration from the voltage's of other kernels,everything from the GPU voltage to the screen regulator has been tweaked
CPU overclock up to 1.7GHZ
multiple governors i have personally added (this is ALWAYS changing considering what jhonny/grarak/faux/bsmitty/Amperific/boype do to their governor,or what i personally decide to do)
some new IO schedulers have been added
EXFAT is added, 1.2.5 source from dorimanx
updated RWSEM to linux 3.14
numerous enhancements to SLUB including a update to the 3.3 version
MMC software updates/enhancements
GPU side enhancements
HUGEMEM setup (this is a arguement from me personally,the gnex is only a 720P phone,you cannot utilize 1080P with out screen,so even if this is a retarded and dirty hack,i want to use the extra available ram)
ALL kernel logging has been disabled for a increase in speed
Kernel SamePage merging has been updated to linux 3.6 standards with faux's check page patch for improved performance and efficiency
memory Compaction updates for better performance
modified screen colors
imsoyen's SmartReflex 1.5 tuning interface
updated thermal framework drivers from faux & omapzoom
updated android binder.c from omapzoom's 3.8 branch that bsmitty discovered
updated logger from poondog,linux 3.9
graphite and link time optimizations including -o3 and hard float point with NEON with the latest linaro 4,9.1 toolchain from christopher83,compiled with graphite ops on gpu code along with -o3
zcache,zsmalloc and zram updated to linux 3.11 from mpokang kernel with faux's setup for zram
many misc enhancements from AK kernel
many misc OMAP enhancements
the latest WIFI drivers WITH a working hotspot
a modified anykernel zip package that will install a new HOSTAPD binary for working wifi hotspot and new meda_profiles.xml to fully disable 108PTHIS KERNEL USES VERY HIGH CLOCK SPEEDS WITH VERY LOW VOLTAGES,I BUILD THIS KERNEL THROUGH A "PERSONAL" SETUP,IF YOU GET SOD'S/ FREEZES,PLEASE UP YOUR VOLTAGES ON "MPU" BY 25 UNTIL THEY STOP :3
IF YOU'RE GOING TO USE A HOTPLUG GOVERNOR, FOR ALL THAT IS HOLY DO NOT USE MULTICORE POWER SAVING WITH IT. THIS CAUSES ISSUES AND NO BUG REPORTS ARE ALLOWED IF YOU HAVE HOTPLUG WITH MCPS
BUILDS:http://patty.mbqdevelopment.com/Kernels/ASKP Remix/ <- the numbers are going to be in order,the bigger the better XD (thanks to mbq for the generous hosting site,or as i like to call him,"big brother" thanks man :good: )
-------------------------------------------------------------------------------------------------------------------------
ALL CREDITS TO THE FOLLOWING
bsmitty83 <- i seriously use all of his commits that i possibly can,go thank him when you get the chance and try his kernel!
franciscofranco<-franco is franco. you all know what he can do.
amperific<i used his kernel for a base,without him,this wouldnt be here :good: give the original a shot when you get the chance!its much cleaner
grarak<lots of his fixes,and thanks to him ive learned alot
Ezekeel<ezekeel. nothing else needed.
tFrost<his great Rom Directory app that can download kernel updates (http://forum.xda-developers.com/gal...ctory-3-14-t2681305/post51078192#post51078192)
burstlam<i use his backports all through the kernel
edoko<alot of his air kernel stuffs helped this kernel alot
faux123<its faux.
ak<he has ALOT of code in this kernel.
imoseyon<interactive x
metalspring<his toolchain is bomb :good:
morfic<color controls
boype<its boype,nothing less to say.
aosp<mr smarty pants
pianistaPL (he wrote most of the original OP for me)
milojoseph (he told me to make the thread)
MBQ_ (his music takes headaches away) ((https://soundcloud.com/mbq-1)) (((he re-wrote the OP for me for spelling fixes and organization)))
poondog (used alot of his stuff for memory)
jhonnyx<-i use every commit of his that works
you! the users! for testing and adding ideas!
and many many more!
GITHUB: https://github.com/pattyboi/kernel_tuna/
CHANGELOG: https://github.com/pattyboi/kernel_tuna/commits/milestone[/CENTER]
good to know you're working on a kernel! keep it up!
jhonnyx said:
good to know you're working on a kernel! keep it up!
Click to expand...
Click to collapse
thanks man,means alot! really do appreciate the support!
Flashing it as I type
Will report soon, it's good to see new kernel from people in this gnex threads
Edit: got my first freeze, lol. Maybe the voltages are too low, I guess?
But I got a couple questions:
1. Did you intended to UV voltages, including IVA? I see it lower than DirtyV and Franco.
2. The frequency steps..... There's a lot of it, but is it correct? There are numerous voltages that are new to me lol like 460, 1480, 1560...
Maybe you could explain just a little bit lol
Edit2: pattyboi did you implemented early suspend on interactive? There's a slight lag when waking up the device
Btw there's pegasusq, too.
This is how it starts you are now entering the Linux twilight zone of the quest for the best kernel patches go get em @pattyboi:)
@aosp you're a veteran
Sent from my Galaxy Nexus using xda app-developers app
@pattyboi:)
Thanks, bro! It looks nice. Do you maybe know how to add to this kernel 85MB Ram (to make SuperRAM version)?
ahmadairfan said:
Flashing it as I type
Will report soon, it's good to see new kernel from people in this gnex threads
Edit: got my first freeze, lol. Maybe the voltages are too low, I guess?
But I got a couple questions:
1. Did you intended to UV voltages, including IVA? I see it lower than DirtyV and Franco.
2. The frequency steps..... There's a lot of it, but is it correct? There are numerous voltages that are new to me lol like 460, 1480, 1560...
Maybe you could explain just a little bit lol
Edit2: pattyboi did you implemented early suspend on interactive? There's a slight lag when waking up the device
Btw there's pegasusq, too.
Click to expand...
Click to collapse
sorry for the late reply bud,i fell asleep after getting that 2nd build up. the 460 is gonna be removed,as i said im still nooby and i didnt add it right :silly: the rest should be correct as i didnt touch any other one,the uv voltages were just burstlams slight uv on regulators,i havent touched anything with iva,mpu or anything else,ill probabaly bump them up a lil within the nest couple days still gotta wrap my head around how to properly do it lol. but thank you for testing man! & yeah the interactive early suspend i "think" is there,is 7 am so im not entirely sure,if its causing wake lag i might try and switch the interacitves or just remove early suspend,like i said its a big mess i gotta iron out
EDIT ,one more thing,did you disable eco mode? that might cause wake delay because it was for me
pianistaPL said:
@pattyboi:)
Thanks, bro! It looks nice. Do you maybe know how to add to this kernel 85MB Ram (to make SuperRAM version)?
Click to expand...
Click to collapse
i will work on that for the next couple days! im still a noob so dont get your hopes up,but ill try man
aosp said:
This is how it starts you are now entering the Linux twilight zone of the quest for the best kernel patches go get em @pattyboi:)
Click to expand...
Click to collapse
thanks for the support man , if you ever can work some of your magic with amazing pullin up amazing commits,ill be very very grateful
as if i didnt spam the thread enough lol,we got a update! remove 460mhz due to it being added incorrectly,add fifo and fixes for it from ak's kernel,itll be up in 3 minutes!
pattyboi:) said:
as if i didnt spam the thread enough lol,we got a update! remove 460mhz due to it being added incorrectly,add fifo and fixes for it from ak's kernel,itll be up in 3 minutes!
Click to expand...
Click to collapse
Alright buddy you did it. Now all you gotta do is sit back and watch the thanks meter get higher than the post meter. Then you will be a certified guru.
pattyboi:) said:
i will work on that for the next couple days! im still a noob so dont get your hopes up,but ill try man
Click to expand...
Click to collapse
Thanks! You can always ask for help our amazing developers
I'm charging my phone and will install your kernel
DR3W5K1 said:
Alright buddy you did it. Now all you gotta do is sit back and watch the thanks meter get higher than the post meter. Then you will be a certified guru.
Click to expand...
Click to collapse
thanks man,the support really does mean the world for me
pianistaPL said:
Thanks! You can always ask for help our amazing developers
I'm charging my phone and will install your kernel
Click to expand...
Click to collapse
thats true man,ill prob talk to some of them tonight & thank you for giving it a shot
if you guys want,theres a latest build without early suspend,testing to see if it has anything to do with screen wake delay,its up on dropbox as i type
pattyboi:) said:
sorry for the late reply bud,i fell asleep after getting that 2nd build up. the 460 is gonna be removed,as i said im still nooby and i didnt add it right :silly: the rest should be correct as i didnt touch any other one,the uv voltages were just burstlams slight uv on regulators,i havent touched anything with iva,mpu or anything else,ill probabaly bump them up a lil within the nest couple days still gotta wrap my head around how to properly do it lol. but thank you for testing man! & yeah the interactive early suspend i "think" is there,is 7 am so im not entirely sure,if its causing wake lag i might try and switch the interacitves or just remove early suspend,like i said its a big mess i gotta iron out
EDIT ,one more thing,did you disable eco mode? that might cause wake delay because it was for me
Click to expand...
Click to collapse
Take it easy bud, we're all here learning as well lol
Yeah I'm not using eco mode and intelli-plug, not liking the less-snappier feel lol.
You could take interactive from either bsmitty's or Franco's, I think they're making out the best interactive so far. :good:
Also, this kernel has GPU governor. Is it overclocked as default?
Btw, I'm suggesting to do some wrapping on your OP. Because your kernel has many features inside lol :laugh:
Thanks!
ahmadairfan said:
Take it easy bud, we're all here learning as well lol
Yeah I'm not using eco mode and intelli-plug, not liking the less-snappier feel lol.
You could take interactive from either bsmitty's or Franco's, I think they're making out the best interactive so far. :good:
Also, this kernel has GPU governor. Is it overclocked as default?
Btw, I'm suggesting to do some wrapping on your OP. Because your kernel has many features inside lol :laugh:
Thanks!
Click to expand...
Click to collapse
I'll switch em out soon GPU us at the actual original clock.(384 or around that) I'm gonna try and get the sysfs thing for the oc set up today,was being a pain the other day,I'm not good with op's but I'll try
pattyboi:) said:
I'll switch em out soon GPU us at the actual original clock.(384 or around that) I'm gonna try and get the sysfs thing for the oc set up today,was being a pain the other day,I'm not good with op's but I'll try
Click to expand...
Click to collapse
I can make good OP in few minutes Will back
---------- Post added at 03:37 PM ---------- Previous post was at 03:20 PM ----------
Test OP:
INTRODUCTION
This is my personal kernel based of ASKP Kernel. I cherry-picked a lot of custom commits. I'm new in development so every help from developers and users will be great.
FEATURES
ASKP Haste+ as base
graphite and lto optimizations
metalsprings custom toolchain - Linaro 4.7.4
dirtyv commits
rcu updates
intelliplug
pvr governor's
zRAM
high perfomance sound
slight regulator undervolt
oc up to 1.6 ghz
smart reflex class 3 only (the switches in trickster dont work because you cannot adjust sr class 3)
some schedulers i use
some govs i use/like
fastcharge
eco mode
screen specific controls of course
updated thermal drivers
ion updates
700mb ram for user
voltage controls
exfat suppourt
ALL DOWNLOADS
https://www.dropbox.com/sh/z43idai19erzu2n/1NZ69_Jeo3
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ALL credits go to:
bsmitty83
franciscofranco
amperific
grarak
Ezekeel
burstlam
faux123
ak
imoseyon
metalspring
morfic
boype
and many many more!
GITHUB: https://github.com/pattyboi/kernel_tuna
CHANGELOG: https://github.com/pattyboi/kernel_tuna/commits/milestone?page=1
pattyboi:) said:
thanks for the support man , if you ever can work some of your magic with amazing pullin up amazing commits,ill be very very grateful
Click to expand...
Click to collapse
Firsties kill the vmsplit stock is optimal even boype knows
defconfig: 3G/1G vmsplit (tuna default) · ecf4b67 · boype/kernel_tuna_kk44 · GitHub - http://goo.gl/PXCfEo