I have to move to a new phone. I backed up my old one to the SDcard. I placed it in the new phone and booted into TWRP. When I enter the restore menu, I go to ext card and it doesn't show any backups. I am not sure why TWRP does not see my sdcard backups so I can restore my backup.
caseyatbt said:
I have to move to a new phone. I backed up my old one to the SDcard. I placed it in the new phone and booted into TWRP. When I enter the restore menu, I go to ext card and it doesn't show any backups. I am not sure why TWRP does not see my sdcard backups so I can restore my backup.
Click to expand...
Click to collapse
There different serial#s it dosent recognize that phone I had the same problems when I switched my s3 to another s3
Sent from my SPH-L900 using xda premium
Will it work with CWM or just start from scratch?
Sent from the Delta Quadrant using XDA Premium
caseyatbt said:
Will it work with CWM or just start from scratch?
Sent from the Delta Quadrant using XDA Premium
Click to expand...
Click to collapse
CWM backups can only be restored with CWM, and TWRP backups can only be restored with TWRP
CNexus said:
CWM backups can only be restored with CWM, and TWRP backups can only be restored with TWRP
Click to expand...
Click to collapse
Sorry, what I meant was, if I install CWM, will I have a better shot at a restoration or does CWM check serials as well?
caseyatbt said:
Sorry, what I meant was, if I install CWM, will I have a better shot at a restoration or does CWM check serials as well?
Click to expand...
Click to collapse
And that's what I'm answering. CWM won't even attempt to restore it (much less check the serial) because its in a different format than what it saves its backups as, you have to be on TWRP if you even wanna try it
caseyatbt said:
I have to move to a new phone. I backed up my old one to the SDcard. I placed it in the new phone and booted into TWRP. When I enter the restore menu, I go to ext card and it doesn't show any backups. I am not sure why TWRP does not see my sdcard backups so I can restore my backup.
Click to expand...
Click to collapse
Are you just trying to restore apps or what?
@OP I actually started a similar thread a while back that could have given you the solution make a backup on your new phone using twrp, then on your sd card within the twrp folder there should be two folders with different numbers, one will have the backup you just made and the other will have your old backups. Move the files with the old backups into the folder which contains the new backup, then delete the old, empty folder. Now you can restore your old backups
Sent from my SPH-L710 using Tapatalk 2
CNexus said:
And that's what I'm answering. CWM won't even attempt to restore it (much less check the serial) because its in a different format than what it saves its backups as, you have to be on TWRP if you even wanna try it
Click to expand...
Click to collapse
I meant install CWM, then make a backupwith CWM and use CWM on a new phone.
imaconeheadXD said:
@OP I actually started a similar thread a while back that could have given you the solution make a backup on your new phone using twrp, then on your sd card within the twrp folder there should be two folders with different numbers, one will have the backup you just made and the other will have your old backups. Move the files with the old backups into the folder which contains the new backup, then delete the old, empty folder. Now you can restore your old backups
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
I tried that and it says it failed as it finishes the restore.
I decided to just restore from Titanium Backup and do the set it up over again.
WAIT
Do you mean to say that you still have the old phone? If so, there's a way to make an ODIN flashable tar of the exact state of your old phone so you can flash to your new phone
Here's a link: http://forum.xda-developers.com/showthread.php?t=1777579
Partitions are the same so you can use the script someone in there made
CNexus said:
WAIT
Do you mean to say that you still have the old phone? If so, there's a way to make an ODIN flashable tar of the exact state of your old phone so you can flash to your new phone
Here's a link: http://forum.xda-developers.com/showthread.php?t=1777579
Partitions are the same so you can use the script someone in there made
Click to expand...
Click to collapse
That is cool! Thanks. I have made the images, but making them flash-able seems a little less clear.
caseyatbt said:
I have to move to a new phone. I backed up my old one to the SDcard. I placed it in the new phone and booted into TWRP. When I enter the restore menu, I go to ext card and it doesn't show any backups. I am not sure why TWRP does not see my sdcard backups so I can restore my backup.
Click to expand...
Click to collapse
TWRP bases backups and restores on serial number in a couple places. I've only done this from same phone to other of the same phones I've gotten of the same model (e.g. S3 to S3, HTC One 32GB to HTC One 64GB). Not sure how it would work from different model to different model - spose it depends on what you are restoring., model, rom, etc.
TWRP backup directory is sdcard/TWRP/BACKUPS/[SerialNumberOfDevice]/[timeStampOfBackup]/
Change the directory name to the serial number of the new device you want to restore to. Then, go to /[timeStampOfBackup]/recovery.log and do a find/replace on all of the old serial number with the new serial number - I believe there are 8 or 9 instances.
If you change the directory name from w/in TWRP recovery console, reboot - then it'll show up as a recovery option... though, you'll need to update the log file another way -if it's on an sdcard (vs. an HTC One where there is no true sdcard) neither should be a problem.
cheers
hex90 said:
TWRP bases backups and restores on serial number in a couple places. I've only done this from same phone to other of the same phones I've gotten of the same model (e.g. S3 to S3, HTC One 32GB to HTC One 64GB). Not sure how it would work from different model to different model - spose it depends on what you are restoring., model, rom, etc.
TWRP backup directory is sdcard/TWRP/BACKUPS/[SerialNumberOfDevice]/[timeStampOfBackup]/
Change the directory name to the serial number of the new device you want to restore to. Then, go to /[timeStampOfBackup]/recovery.log and do a find/replace on all of the old serial number with the new serial number - I believe there are 8 or 9 instances.
If you change the directory name from w/in TWRP recovery console, reboot - then it'll show up as a recovery option... though, you'll need to update the log file another way -if it's on an sdcard (vs. an HTC One where there is no true sdcard) neither should be a problem.
cheers
Click to expand...
Click to collapse
I'm having a similar issue with TWRP not seeing backups but my device didn't change. I found my serial number but it's a long, 14 digit number and the folder you mention above is about 8 characters long consisting of characters and numbers. I tried to convert my serial number (is Hex I believe) to ASCII but it doesn't render the same name as the folder (not even close in terms of length). Any idea as to how I can convert it?
robertfah said:
I'm having a similar issue with TWRP not seeing backups but my device didn't change. I found my serial number but it's a long, 14 digit number and the folder you mention above is about 8 characters long consisting of characters and numbers. I tried to convert my serial number (is Hex I believe) to ASCII but it doesn't render the same name as the folder (not even close in terms of length). Any idea as to how I can convert it?
Click to expand...
Click to collapse
I think the easiest way of getting the "new" serial number is just to create a new TWRP backup for your phone (maybe something small like just recovery). It'll create a new folder with the name of your "new" serial number. That's the one you'd want to use.
robertfah said:
I'm having a similar issue with TWRP not seeing backups but my device didn't change. I found my serial number but it's a long, 14 digit number and the folder you mention above is about 8 characters long consisting of characters and numbers. I tried to convert my serial number (is Hex I believe) to ASCII but it doesn't render the same name as the folder (not even close in terms of length). Any idea as to how I can convert it?
Click to expand...
Click to collapse
Connect your phone to your computer (make sure drivers are installed)
Download the adb_windows.zip from my devhost here: http://d-h.st/qmi
Then unzip that and open a command prompt in the unzipped directory (Shift + Right click > Open command prompt here)
Type "adb devices", press enter, and you'll have your serial in the following form:
Code:
xxxxxxx device
Last step: profit
topherk said:
I think the easiest way of getting the "new" serial number is just to create a new TWRP backup for your phone (maybe something small like just recovery). It'll create a new folder with the name of your "new" serial number. That's the one you'd want to use.
Click to expand...
Click to collapse
Yeah I did that but once again, I couldn't see it through TWRP (but could through Root Explorer or Windows Explorer).
CNexus said:
Connect your phone to your computer (make sure drivers are installed)
Download the adb_windows.zip from my devhost here: http://d-h.st/qmi
Then unzip that and open a command prompt in the unzipped directory (Shift + Right click > Open command prompt here)
Type "adb devices", press enter, and you'll have your serial in the following form:
Code:
xxxxxxx device
Last step: profit
Click to expand...
Click to collapse
Thanks for this...after doing this, the serial number was the same, however, I ran across this thread http://forum.xda-developers.com/showthread.php?t=2178264&highlight=twrp+not+finding+backups&page=2 and found Post #14 to be very helpful and my possible solution.
As it turns out, when I connect my phone to my computer, I get the drive "SPH-L710" and the folders "Card" and "Phone" within that. Phone has a 0 folder in it and I copied the TWRP from Phone\TWRP to 0\TWRP and then I was able to view them and restore them in recovery.
So why isn't TWRP storing the backups in 0\TWRP? What is supposed to be in the 0 folder and the Phone folders? it looks like I have some duplicate folders going on:
Phone:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
0:
This actually worked for me. I bricked my LG G3, got Verizon to send me a replacement LG G3, and then I used the TWRP backup that I had made to restore everything. Thanks for this information.
How I got it to work was I made a TWRP backup on the new phone, transferred the backup that I had made on the old phone to the new phone, rename the new backup to something, and rename the old backup to to match the original name of the new backup.
TWRP backup directory is sdcard/TWRP/BACKUPS/[SerialNumberOfDevice]/[timeStampOfBackup]/
Change the directory name to the serial number of the new device you want to restore to. Then, go to /[timeStampOfBackup]/recovery.log and do a find/replace on all of the old serial number with the new serial number - I believe there are 8 or 9 instances.
If you change the directory name from w/in TWRP recovery console, reboot - then it'll show up as a recovery option... though, you'll need to update the log file another way -if it's on an sdcard (vs. an HTC One where there is no true sdcard) neither should be a problem.
cheers[/QUOTE]
Thanks I got it working like this
During the TWRP restore process (old phone backup to new phone but same model), should I restore every partition to have everything working properly? or maybe just system+data?
I mean about screen as below:
I am not sure if I should also restore partition as: modem, boot?
I had to have my note2 replaced I did a twrp backup placed it on new phone in the backup twrp folder but it is not recognized. Anyone have any possible solutions? Really all I'm after is game data that was backed up,and I'm not sure where to find that particular file in the backup thanks.
pretty sure u wouldnt wanna do a full nandroid restore of your partitions to another device... but as far as your game data goes.... you can use titanium backup to recover the apk and the game data by extracting from the nandroid backup file.
I've tried to do this before. It won't work.
Sent from my SGH-T889 using xda premium
Hey buddy. New device just start fresh. Safest way...
Hey,
I was on the same boat as u. I got it to work. I can remember the specifics at the moment but gist of it is that twrp creates a specific backup folder unique to each device. Open up an file browser and navigate over to where u have your backup. If theyre o. Your sd card it should be TWRP > BACKUPS > (Here u should find 2 folders with a bunch of random letters and numbers)
Those 2 folders are your backup folders. One was from your old device and the other is the folder twrp created for your new device.
When u reeboot into recovery, twrp wont recognize the old backup folder since it was unique to your old phone.
Long story short. Lol. Just go into the old folder from the file browser and copy the backup to the new back up folder.
After that, delete the old backup folder. Your backup should then show up when you boot into recovery.
As for which is the old and which is the new folder. My best bet is tbat the new folder is empty and the old folder has your backup.
Hope that helps.
Let me know if you need more help.
Hello everyone!
Yesterday, I tried to upgrade to a Kit Kat rom. I used the Galaxy nexus toolkit, and did a full backup... plus an EFS backup. Afterwards, I did the full format/wipe from CWM recovery, and installed the ROM.
Well, apparently one of the options wipes your EFS file folder; I have no way of connecting to my network. My IMEI is the stock number, and I've spent hours scouring the internet trying to find a way to restore it. The majority of the responses are "try a factory reset and restore" or "too bad so sad, should've backed up". Well, I did try several options. The first being the EFS restore. Apparently, the backup is stored on the phone and wasn't sent to my computer, like the rest of the normal backups. That option is now out. Oh, how I miss SD storage.
The second was a full restore to stock, again, nothing. Third, I had an old nandroid backup. After doing these I saw that the EFS tree is left untouched, as it is so delicate. The only way to do this is give up and send it in for servicing, or to do a phone NV Backup swap with QPST.
I need to get access to the service menu (or any way to change the USB/Modem) as listed here: http://forum.xda-developers.com/showthread.php?t=1946915
Unfortunately, *#7284# does nothing on an i9250, nor does anything besides *#*#4636#*#*... which isn't what I need. The terminal command doesn't appear to work, either.
I don't understand very well but, have you tried to restore your EFS backup from recovery? Did you make the backup from recovery or from toolkit?
lkeops said:
I don't understand very well but, have you tried to restore your EFS backup from recovery? Did you make the backup from recovery or from toolkit?
Click to expand...
Click to collapse
I have done a recovery from the toolkit (as the files are stored on the computer and not the phone) which is where I made the backup from, as well.
However, the EFS partition is apparently never included in this backup, as it is supposed to be immune to changes and formatting. I proved them wrong.
Well I did that same blunder last month with my nexus and then I tried all remedies plus own experiments but couldn't get results. All I heard is that to send phone to service centre. If you find any other solution so do mention here, I gave up after so many tries
what9000 said:
I have done a recovery from the toolkit (as the files are stored on the computer and not the phone) which is where I made the backup from, as well.
However, the EFS partition is apparently never included in this backup, as it is supposed to be immune to changes and formatting. I proved them wrong.
Click to expand...
Click to collapse
@what9000 you may want to check out this thread http://forum.xda-developers.com/showthread.php?t=2508320
Specifically post #6 AND #9
I have personally never used the nexus backup tool, but if it does does backup the /radio folder, you may be in luck.
Well, it has been repaired. Thank you all for your help, in the end I managed to pull some things together in a mash up of fixes.
It appears that upon a new restore from a nandroid backup, I was still getting no signal. However, I did a *#06#, and my IMEI was intact. I read that the Radio folder gets backed up, but not the factory folder. Upon a new install, I imagine the radio folder is wiped, which is why every install from then on had a bunk imei (it had nothing to pull from as my factory folder is toast)
However, it looks like the efs backup I had *did* save the folder structure... I found the efs.tar backup in my galaxy nexus toolkit folder. It had the folder zip, but couldn't restore it due to permissions... didn't feel like messing with that at the moment. I copied them in with root explorer, grabbed the nv_data files from the /radio/ folder, deleted the files from /radio, and restarted. Lo and behold, they were restored from the factory folder with the correct IMEI.
I just put a fresh copy of kit kat 4.4.2 on and have cell service again. Oh happy day, I don't have to use my old HTC Sensation! :highfive:
This also marks the first time a backup actually saved my skin. Usually I vaporize the backup accidentally before it has an opportunity to prove itself useful.
I am stuck in a confusing situation I cant get out of and am in serious trouble.
My work Galaxy Tab Pro 8.4 LTE (T325), after more than 2 years of perfect service fell to the ground and broke in a million pieces this morning. I had CM11 on it and had done a TWRP backup just yesterday onto the external MiniSD Card. So, I went to a second hand shop phone shop in the afternoon and found another T325 just like mine in good shape with stock 4.4.2 Samsung TouchWiz ROM.. just white instead of white, but no matter. I immediately rooted it and flashed TWRP.. all good.
I booted into TWRP and first thing I did was to make a backup of the stock ROM to the internal SD Card and also the external MiniSD Card (just to be safe). But after I made the safety backup, when I went into restore, TWRP CANT find it the old backup of my other Tab on the external MiniSD Card. It can only see the new backup I had just made, both on the internal and external memory!
Confused, I booted up the Tab again, and using Root Explorer (with full root access) the first strange thing I noticed was that inside the TWRP folder on the root directory of the internal SD card, its "empty".. but the new backup I just made is actually there.. if I go to the root folders under MNT, there I can see perfectly the very same TWRP folder with the backup sub-folder inside! So why its not showing up when browsing \Emulated\0 TWRP folder? I dont understand this one. Anyway, next I went into my external MiniSD Card, and indeed I have now 2 backups inside the TWRP folder, the old backup from my old Tab that I want to restore and the new backup I had just made, each in their own sub-folder structure as they should be.
So, I rebooted into TWRP recovery and again and I can ONLY see both the new internal and external backups I just made, but NOT the old backup I need to recover from.. it just doesn't show up! Such a mystery has never happened to me before. This is the same Tab, same model, same old TWRP version (2.7.1.0) and using the original external MiniSD Card. Where am I going wrong? I can see the file names inside the new and old backup are different.. is this the problem? Why is the same TWRP version on a new Tab generating different file names than the same TWRP of the old Tab?
To be specific, the new (recoverable) backup folder has the following files:
\TWRP\10d401a5\2014-02-05--07-03-30 KOT49H.T325ZSU1B0B4\
boot.emmc.win
data.ext4.win
system.ext4.win000
system.ext4.win001
recovery.log
The old (not-recoverable) backup folder that I want to restore from, has the following files:
\TWRP\d59ee67a\2014-03-09--08-44-04 cm_mondrianlte-userdebug 4.4.4 KTU84Q b9f00\
boot.emmc.win
data.ext4.win000
data.ext4.win001
system.ext4.win
recovery.log
Any advice on this is greatly appreciated and I apologize in advance if its me missing something obvious or just being plain stupid!
Thanks again!!!
I suspect the d59ee67a \ 10d401a5 are generated from the tablet serial number, so twrp will only look in the folder for the current serial number match, which is why it won't show the other backup.
I would assume you could copy the file contents from your old backup into the new twrp folder then restore, as long as you are sure the tablets are identical, have the same bootloader and same memory sizes...etc
so basically try to copy the folder "2014-03-09--08-44-04 cm_mondrianlte-userdebug 4.4.4 KTU84Q b9f00" to TWRP\10d401a5\
otyg said:
I suspect the d59ee67a \ 10d401a5 are generated from the tablet serial number, so twrp will only look in the folder for the current serial number match, which is why it won't show the other backup.
I would assume you could copy the file contents from your old backup into the new twrp folder then restore, as long as you are sure the tablets are identical, have the same bootloader and same memory sizes...etc
so basically try to copy the folder "2014-03-09--08-44-04 cm_mondrianlte-userdebug 4.4.4 KTU84Q b9f00" to TWRP\10d401a5\
Click to expand...
Click to collapse
Wow, yes, thank you very much for the reply! I had no idea that each hardware generates a specific number by which TWRP tags the folder. This is why the backup of the old Tab is not found because its inside the folder with the number of the older hardware. I followed your recommendation and simply moved the old backup into the subfolder of the new backup I had made and instantly TWRP could see it and I made a successful restore!
This is a very import tip to know and I cant thank you enough for sharing it with me! Thanks again