Develop Bugs

i317 unlock: code vs. cable

I am trying to get my ATT Note 2 i317 unlocked. It looks like there are 2 ways to do it. Cable unlock vs. code unlock.
I have code unlocked phones before, and it works fine. Looks like the cable unlock is a hack to the same end. It is a cheaper way.
Does anyone know if the cable unlock is a good way to unlock, or if there may be consequence? Is it worth saving the $15?
Thanks.

Sim unlock ? Check the recent threads for a phone code to bring up internal unlock. Seems to be working well for many people. And its free!
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
---------- Post added at 07:50 PM ---------- Previous post was at 07:48 PM ----------
http://forum.xda-developers.com/showthread.php?t=2014982
Sent from my SAMSUNG-SGH-I317 using xda app-developers app

spycedtx said:
Sim unlock ? Check the recent threads for a phone code to bring up internal unlock. Seems to be working well for many people. And its free!
[/COLOR]http://forum.xda-developers.com/showthread.php?t=2014982
Click to expand...
Click to collapse
Worked perfectly on my at&t I317!
Sent from my SGS3 using my finger

cowfunone said:
I am trying to get my ATT Note 2 i317 unlocked. It looks like there are 2 ways to do it. Cable unlock vs. code unlock.
I have code unlocked phones before, and it works fine. Looks like the cable unlock is a hack to the same end. It is a cheaper way.
Does anyone know if the cable unlock is a good way to unlock, or if there may be consequence? Is it worth saving the $15?
Thanks.
Click to expand...
Click to collapse
FREE
Just dial the following keys *#197328640#
Main Menu > [1] UMTS > [1] Debug Screen > [8] Phone Control > [6] Network Lock > Options [3]Perso SHA256 OFF > (after choosing this option, wait about 30 seconds, Hit menu then go back to [6] Network Lock then choose [4] NW Lock NV Data INITIALLIZ ..... wait for a minute then reboot your phone. UNLOCKED

I confirm this works on T-889 and T-999 (GN2 & S3)

sucramedoog said:
FREE
Just dial the following keys *#197328640#
Main Menu > [1] UMTS > [1] Debug Screen > [8] Phone Control > [6] Network Lock > Options [3]Perso SHA256 OFF > (after choosing this option, wait about 30 seconds, Hit menu then go back to [6] Network Lock then choose [4] NW Lock NV Data INITIALLIZ ..... wait for a minute then reboot your phone. UNLOCKED
Click to expand...
Click to collapse
Tried this severally. not working. help. thanks

ziainaction said:
Tried this severally. not working. help. thanks
Click to expand...
Click to collapse
Necro.
ROM, modem version? It's difficult to help with no knowledge of your device. Here is a thread for this method though that most likely answers these for you.
http://forum.xda-developers.com/showthread.php?p=34661189

xBkKx said:
Necro.
ROM, modem version? It's difficult to help with no knowledge of your device. Here is a thread for this method though that most likely answers these for you.
http://forum.xda-developers.com/showthread.php?p=34661189
Click to expand...
Click to collapse
ROM is stock. though I rooted it. baseband version is i317ucalj2. thanks

The cable method is slightly sketchy, because you will be giving a stranger complete access to all personal information on your pc and phone. If you trust the person, or can verify their reputation, why not?
If you are with AT&T and are in good standing, you can ask for your unlock code for free. It takes two days or less to get it.
But you have the correct modem installed (J2) to perform the above listed steps. If you followed them you should be unlocked. You would have to verify it by using another carrier's Sim card.

Note 2 unlocking woes
ziainaction said:
ROM is stock. though I rooted it. baseband version is i317ucalj2. thanks
Click to expand...
Click to collapse
Will this method also work on a stock Note 2 i317? I have searched for two days now for a way to unlock my Note 2 with no luck.

It fails for me too. That code just gives me an error "Connection problem or invalid MMI code"
It's an ATT note 2, GT-N7105. I'm running Liquid smooth 3.2 with the kernal that comes with the rom. The baseband is I317UCUBMJ. I don't get it.

The modem (baseband) has to be J2. It's the only firmware with the unlock menu.

130
rangercaptain said:
The modem (baseband) has to be J2. It's the only firmware with the unlock menu.
Click to expand...
Click to collapse
Thanks, I know the modem is really old. It's the only thing I've never been comfortable flashing. I guess I'll update that tonight too.

rangercaptain said:
The cable method is slightly sketchy, because you will be giving a stranger complete access to all personal information on your pc and phone. If you trust the person, or can verify their reputation, why not?
If you are with AT&T and are in good standing, you can ask for your unlock code for free. It takes two days or less to get it.
But you have the correct modem installed (J2) to perform the above listed steps. If you followed them you should be unlocked. You would have to verify it by using another carrier's Sim card.
Click to expand...
Click to collapse
I did all perfectly. Not working
I think I will just purchase d unlock code
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app

Is there a method to unlock the Rogers SGH-i317m
Thanks

Possible SIM Unlock T999

First, sorry if sim unlock has already been achieved. I searched every where and couldnt find a solution. I have a galaxy S3 T999 US version. I was able to sim unlock my device by doing a couple of things.
I downloaded and odined a rooted 4.1.1 stock found here: http://forum.xda-developers.com/showthread.php?t=1771687
I then booted up the phone after it was finished and did an ota software update.
I the followed these instructions found here on xda:
Go to dailer screen. press *#197328640#
Main Menu > [1] UMTS > [1] Debug Screen > [8] Phone Control > [6] Network Lock > Options [3]Perso SHA256 OFF > (after choosing this option, wait about 30 seconds, then go back one step by pressing the Menu button then select Back, now you are in [6] Network Lock then choose [4] NW Lock NV Data INITIALLIZ ..... wait for a minute then reboot your phone... enjoy!!! There is no confirmation on the phone that the unlock was successfull.... just reboot your phone....
To test, just insert a sim card from a different carrier/provider. If the new sim card works then your phone is now unlocked.
Please note that until i installed the rooted stock 4.1.1 rom and did an ota update some of the above options were not available so i was not able to attempt the sim unlock. Also, after you do the ota update, you will lose root, but you will be sim unlocked. You can try odin the rooted stock 4.1.1 and before doing an ota update try the steps first to see if the menu options are there, i never did, so i dont know.
If this works for you, please post back

This is very old for us. We already have a thread for this in general section.

bikrame said:
This is very old for us. We already have a thread for this in general section.
Click to expand...
Click to collapse
Good to know, for some reason i couldnt find it anywhere!

m.kenzie78 said:
First, sorry if sim unlock has already been achieved. I searched every where and couldnt find a solution. I have a galaxy S3 T999 US version. I was able to sim unlock my device by doing a couple of things.
I downloaded and odined a rooted 4.1.1 stock found here: http://forum.xda-developers.com/showthread.php?t=1771687
I then booted up the phone after it was finished and did an ota software update.
I the followed these instructions found here on xda:
Go to dailer screen. press *#197328640#
Main Menu > [1] UMTS > [1] Debug Screen > [8] Phone Control > [6] Network Lock > Options [3]Perso SHA256 OFF > (after choosing this option, wait about 30 seconds, then go back one step by pressing the Menu button then select Back, now you are in [6] Network Lock then choose [4] NW Lock NV Data INITIALLIZ ..... wait for a minute then reboot your phone... enjoy!!! There is no confirmation on the phone that the unlock was successfull.... just reboot your phone....
To test, just insert a sim card from a different carrier/provider. If the new sim card works then your phone is now unlocked.
Please note that until i installed the rooted stock 4.1.1 rom and did an ota update some of the above options were not available so i was not able to attempt the sim unlock. Also, after you do the ota update, you will lose root, but you will be sim unlocked. You can try odin the rooted stock 4.1.1 and before doing an ota update try the steps first to see if the menu options are there, i never did, so i dont know.
If this works for you, please post back
Click to expand...
Click to collapse
Good info

m.kenzie78 said:
Good to know, for some reason i couldnt find it anywhere!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2023709
Btw you dont need to be stock to unlock phone; I did unlock while I was in wicked ROM. So who wants to try this try first in your ROM if not then only go through all process.

bikrame said:
http://forum.xda-developers.com/showthread.php?t=2023709
Btw you dont need to be stock to unlock phone; I did unlock while I was in wicked ROM. So who wants to try this try first in your ROM if not then only go through all process.
Click to expand...
Click to collapse
You need to at least have the Touchwiz framework for it to work. If your on AOSP like Cyanogenmod it won't work

How to Unlock Your Samsung Galaxy S3 & Note 2 (No Rooting)

http://www.youtube.com/watch?v=-cmiEZcw1z8
Unlock your Samsung Galaxy S3, Note 2 and Ruby. Free. No Rooting. No Hacking.
Just dial the following keys *#197328640#
Main Menu
[1] UMTS
[1] Debug Screen
[8] Phone Control
[6] Network Lock
Options [3]Perso SHA256 OFF
(after choosing this option, wait about 30 seconds, then go back one step by pressing the Menu button then select Back, now you are in
[6] Network Lock then choose
[4] NW Lock NV Data INITIALLIZ ..... wait for a minute then reboot your phone
Don't pay high unlocking fee's on eBay! Say no to them with a big smile
(http://forums.redflagdeals.com/free...2-all-gsm-carriers-galaxy-rugby-bell-1266487/)

Old story bro

bikrame said:
Old story bro
Click to expand...
Click to collapse
Just letting new users a chance to unlock their device.

Thanks for the video
Sent from my SGH-T999 using xda premium

Thanks OP. Does this works for you? How can you tell if it is unlocked?

Already a thread on this. Better to bump the old thread than make a new one because most of the questions have already been answered there
Sent from my SGH-T999 using xda premium

saotua said:
Thanks OP. Does this works for you? How can you tell if it is unlocked?
Click to expand...
Click to collapse
Yeah it worked for me. I'm with Bell (Galaxy S3 SGH-1747M), you can check by putting a micro sim into your S3 (Use a friends Sim)

charlieb620 said:
Thanks for the video
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
No problem.

Work 100%
Thanks bro working 100 % :laugh:

I am thinking about unlocking my T-mobile GS3 so I can use it on my vacation to Greece. Will I still be able to receive software updates when they come out?
Are there any downsides to unlocking?

jimvsmij said:
I am thinking about unlocking my T-mobile GS3 so I can use it on my vacation to Greece. Will I still be able to receive software updates when they come out?
Are there any downsides to unlocking?
Click to expand...
Click to collapse
As long as you are running the stock software you will continue to get software updates. There are no downsides to unlocking your device - T-Mobile does this for you regularly if you call them and request an unlock code, this just gets around that completely.

EtherealRemnant said:
As long as you are running the stock software you will continue to get software updates. There are no downsides to unlocking your device - T-Mobile does this for you regularly if you call them and request an unlock code, this just gets around that completely.
Click to expand...
Click to collapse
Great! Thanks! I'm going to attempt it tonight

EtherealRemnant said:
As long as you are running the stock software you will continue to get software updates. There are no downsides to unlocking your device - T-Mobile does this for you regularly if you call them and request an unlock code, this just gets around that completely.
Click to expand...
Click to collapse
I guess my phone T-mobile GS3 is not compatible with the unlocking procedure. After pressing Sha256 OFF. and when I go back, I do not get item 4 on the menu.

jimvsmij said:
I guess my phone T-mobile GS3 is not compatible with the unlocking procedure. After pressing Sha256 OFF. and when I go back, I do not get item 4 on the menu.
Click to expand...
Click to collapse
Did you wait the 30 seconds? If so, hit the SHA256 info option and see if it says [0] - if it does you should already be SIM unlocked (but get a SIM from a friend to test and make sure)

EtherealRemnant said:
Did you wait the 30 seconds? If so, hit the SHA256 info option and see if it says [0] - if it does you should already be SIM unlocked (but get a SIM from a friend to test and make sure)
Click to expand...
Click to collapse
When I select SHA256 info I get:
SHA256_Enable_Flag [0]
Is that what you are referring to?

jimvsmij said:
When I select SHA256 info I get:
SHA256_Enable_Flag [0]
Is that what you are referring to?
Click to expand...
Click to collapse
Yep. It would say 1 if you're locked but that's not guaranteed.
Out of curiosity are you on 4.1.2? Because you need to be on 4.1.1 (UVDLJA or UVDLJC) for this to work - I'm not sure if its tied to the radio or not so I would just backup your 4.1.2 and ODIN the stock 4.1.1 image from here http://forum.xda-developers.com/showthread.php?t=1949687

EtherealRemnant said:
Yep. It would say 1 if you're locked but that's not guaranteed.
Out of curiosity are you on 4.1.2? Because you need to be on 4.1.1 (UVDLJA or UVDLJC) for this to work - I'm not sure if its tied to the radio or not so I would just backup your 4.1.2 and ODIN the stock 4.1.1 image from here http://forum.xda-developers.com/showthread.php?t=1949687
Click to expand...
Click to collapse
I'm on 4.1.2. There were no instructions on how to go back to 4.1.1 on that link. I don't have to root do I?

jimvsmij said:
I'm on 4.1.2. There were no instructions on how to go back to 4.1.1 on that link. I don't have to root do I?
Click to expand...
Click to collapse
ODIN doesn't require root privileges, you have to put yourself in download mode and it flashes. If you don't have ODIN experience, I would just call T-Mobile and ask for the code, explaining you are taking a trip overseas. They will most likely give it to you. ODIN is a low-level tool and you can soft or even hard brick your phone with it if you don't know what you are doing.

EtherealRemnant said:
ODIN doesn't require root privileges, you have to put yourself in download mode and it flashes. If you don't have ODIN experience, I would just call T-Mobile and ask for the code, explaining you are taking a trip overseas. They will most likely give it to you. ODIN is a low-level tool and you can soft or even hard brick your phone with it if you don't know what you are doing.
Click to expand...
Click to collapse
That sounds like a good idea. Should I go back through and select "SHA256 on" to undo anything that I did?

jimvsmij said:
That sounds like a good idea. Should I go back through and select "SHA256 on" to undo anything that I did?
Click to expand...
Click to collapse
Nah it doesn't hurt anything.

How to unlock your I747 (AT&T Galaxy S3)firmware 4.1.2 (FIRMWARE DOWNGRADE INVOLVED!)

How to unlock your I747 (AT&T Galaxy S3)firmware 4.1.2 (FIRMWARE DOWNGRADE INVOLVED!)
PLEASE NOTE DOWNGRADING FROM FIRMWARE 4.1.3 WILL RESULT IN BRICKING!!!! BE AWARE!!!!!
Skip to Bottom if you are on 4.1.3!!!!
Okay so first follow DaveenJay's Steps on "How to Unlock Your Samsung Galaxy S3 & Note 2 (No Rooting)" But with this twist.
Step 1 -
Dail *#197328640#
Main Menu
[1] UMTS
[1] Debug Screen
[8] Phone Control
[6] Network Lock
[3]Perso SHA256 OFF
(after choosing this option, wait about 30 seconds, then go back one step by pressing the Menu button then select Back, now you are in [6] Network Lock
Step 2 - Backup your data, I'm not gonna make a guide for this, there already a few on google if you just do some research. (Or just back up to Google. ( I did not as this was a customers new phone.))
Step 3 - Download Odin 3.07 http://forum.xda-developers.com/attachment.php?attachmentid=1168422&d=1341114468
Step 4 - Download firmware 4.1.1 for i747 http://samsung-updates.com/details/5672/Galaxy_S_III_LTE_AT&T/SGH-I747/ATT/I747UCDLK3.html
Step 5 - Extract the Firmware to the folder of your choosing
Step 6 - Put your device into download mode. (Volume Down + Home Button + Power Button) Then press Volume Up.
Step 7 - Plug your phone into your computer. Let all drivers download.
Step 8 - Open Odin 3.07
Step 9 - Click "PDA" and find the firmware 4.1.1 for i747. let it extract then click start.
Step 10 - After the phone has booted up fully and Odin Passes the device, Power off the device and perform a factory reset. (Volume Up + Home Button + Power Button.) Select Wipe data/Factory reset and press the power button. Select YES -- delete all user data. Select reboot system now.
Step 11 - Once the device is booted up fully follow DaveenJay's Steps again. (Of Course with my twist.)
Dial *#197328640#
Main Menu
[1] UMTS
[1] Debug Screen
[8] Phone Control
[6] Network Lock
[4] NW Lock NV Data INITIALLIZ. Wait one minute then power off the device.
Step 12 - Insert your New sim card, and power back on your device.
Step 13 - Rejoice Your Device is now Unlocked and you deserve Pizza!!!!
P.s. If any one knows if this has been posted before please inform me, so that I may give thanks. Again Thank you DaveenJay, and thank you for reading and please thank me. enjoy your unlocked Galaxy s3!
P.s.s. if this works on other android devices please let me know. I will be testing other devices as I go.
Works on - Galaxy S3 AT&T SGH-I747
Galaxy s3 T-mobile
Galaxy Note 2 AT&T SGH-I317
This is the way way to Unlcok your sim if you are on 4.1.3! If you are on 4.1.3 DO NOT ATTEMPT TO DOWNGRAD YOUR FIRMWARE YOU WILL BRICK YOUR DEVICE!!!
Dail *#197328640#
Main Menu
[1] UMTS
[1] Debug Screen
[8] Phone Control
[6] Network Lock
[3]Perso SHA256 OFF
Wait a few seconds then press menu and go all the way back to the main menu.
[5] run EFS Sync()
Reboot and done.
Thank you Mr.X for this
Works on - NOT TESTED MYSELF WILL DO IN TIME.

information
after unlocking my device will i be able to upgrade to 4.3 or do i have to stay on 4.1.1?

Do not attempt this downgrade if you have upgraded to the official 4.3 ota. It will brick your phone.

scine27 said:
after unlocking my device will i be able to upgrade to 4.3 or do i have to stay on 4.1.1?
Click to expand...
Click to collapse
Once done you can upgrade to any firmware you want as it is a permanent unlock. Also if you downgrade from 4.3 i dont see why it would brick, but if the admin says so then i believe it.

You should probably put a large RED warning in the first post that if they down grade from 4.3 to 4.1.1 to unlock they will hard brick. Specifically flashing the 4.1.X bootloaders cause the brick.
also on 4.3 this appears to work and retains sim unlock SHA256 OFF
Dail *#197328640#
Main Menu
[1] UMTS
[1] Debug Screen
[8] Phone Control
[6] Network Lock
[3]Perso SHA256 OFF
Wait a few seconds then press menu and go all the way back to the main menu.
[5] run EFS Sync()
Reboot and done.

Tky_Electronics said:
Once done you can upgrade to any firmware you want as it is a permanent unlock. Also if you downgrade from 4.3 i dont see why it would brick, but if the admin says so then i believe it.
Click to expand...
Click to collapse
Downgrading from 4.3 is guaranteed to hard brick the phone. As Mr. X says please make note with giant warning at beginning of first post. This will break phones and people need to know.

-Mr. X- said:
You should probably put a large RED warning in the first post that if they down grade from 4.3 to 4.1.1 to unlock they will hard brick. Specifically flashing the 4.1.X bootloaders cause the brick.
also on 4.3 this appears to work and retains sim unlock SHA256 OFF
Dail *#197328640#
Main Menu
[1] UMTS
[1] Debug Screen
[8] Phone Control
[6] Network Lock
[3]Perso SHA256 OFF
Wait a few seconds then press menu and go all the way back to the main menu.
[5] run EFS Sync()
Reboot and done.
Click to expand...
Click to collapse
This method does not work to unlock att galaxy s3 on 4.3 android version. Just tried it.

smrsxn said:
This method does not work to unlock att galaxy s3 on 4.3 android version. Just tried it.
Click to expand...
Click to collapse
if you check the status of the SHA bit is it 0 still? if its 0 it should be unlocked

-Mr. X- said:
if you check the status of the SHA bit is it 0 still? if its 0 it should be unlocked
Click to expand...
Click to collapse
How to check?
I can try again for sure
Sent from my SAMSUNG-SGH-I747 using Tapatalk

After choosing network lock, choose option 2, sha256 info

Sha256_enable_flag [0] is what I have on perso sha256 info option.
But my phone is still locked... I tried tmobile sim and it asked for a code.
Sent from my GT-N8013 using Tapatalk

Just call att and get the unlock code. They will give it to you for free

I know this thread doesn't really concern 4.3 users, But i am unable to unlock with the 4.3 method ending with run EFS SYNC. And PERSO SHA256 Info states: SHA256_ENABLE_FLAG [0]. Do I need to do it with My New SIM removed? Im using a Stock Rooted I747m(Canadian so Identical to AT&T). Thanks in advance for any help!

Does not work on i747M running 4.3 Rogers stock
-Mr. X- said:
You should probably put a large RED warning in the first post that if they down grade from 4.3 to 4.1.1 to unlock they will hard brick. Specifically flashing the 4.1.X bootloaders cause the brick.
also on 4.3 this appears to work and retains sim unlock SHA256 OFF
Dail *#197328640#
Main Menu
[1] UMTS
[1] Debug Screen
[8] Phone Control
[6] Network Lock
[3]Perso SHA256 OFF
Wait a few seconds then press menu and go all the way back to the main menu.
[5] run EFS Sync()
Reboot and done.
Click to expand...
Click to collapse
I just tried this as well and it does not work for me (i747M running 4.3 Rogers stock). The SHA256 is also 0 for me, but the SIM is still locked.

Tky_Electronics said:
Okay so first follow DaveenJay's Steps on "How to Unlock Your Samsung Galaxy S3 & Note 2 (No Rooting)" But with this twist.
Step 1 -
Dail *#197328640#
Main Menu
[1] UMTS
[1] Debug Screen
[8] Phone Control
[6] Network Lock
[3]Perso SHA256 OFF
(after choosing this option, wait about 30 seconds, then go back one step by pressing the Menu button then select Back, now you are in [6] Network Lock
Step 2 - Backup your data, I'm not gonna make a guide for this, there already a few on google if you just do some research. (Or just back up to Google. ( I did not as this was a customers new phone.))
Step 3 - Download Odin 3.07 http://forum.xda-developers.com/attachment.php?attachmentid=1168422&d=1341114468
Step 4 - Download firmware 4.1.1 for i747 http://samsung-updates.com/details/5672/Galaxy_S_III_LTE_AT&T/SGH-I747/ATT/I747UCDLK3.html
Step 5 - Extract the Firmware to the folder of your choosing
Step 6 - Put your device into download mode. (Volume Down + Home Button + Power Button) Then press Volume Up.
Step 7 - Plug your phone into your computer. Let all drivers download.
Step 8 - Open Odin 3.07
Step 9 - Click "PDA" and find the firmware 4.1.1 for i747. let it extract then click start.
Step 10 - After the phone has booted up fully and Odin Passes the device, Power off the device and perform a factory reset. (Volume Up + Home Button + Power Button.) Select Wipe data/Factory reset and press the power button. Select YES -- delete all user data. Select reboot system now.
Step 11 - Once the device is booted up fully follow DaveenJay's Steps again. (Of Course with my twist.)
Dial *#197328640#
Main Menu
[1] UMTS
[1] Debug Screen
[8] Phone Control
[6] Network Lock
[4] NW Lock NV Data INITIALLIZ. Wait one minute then power off the device.
Step 12 - Insert your New sim card, and power back on your device.
Step 13 - Rejoice Your Device is now Unlocked and you deserve Pizza!!!!
P.s. If any one knows if this has been posted before please inform me, so that I may give thanks. Again Thank you DaveenJay, and thank you for reading and please thank me. enjoy your unlocked Galaxy s3!
P.s.s. if this works on other android devices please let me know. I will be testing other devices as I go.
Works on - Galaxy S3 AT&T SGH-I747
Galaxy s3 T-mobile
Click to expand...
Click to collapse
Thank you very much for this information!

-Mr. X- said:
You should probably put a large RED warning in the first post that if they down grade from 4.3 to 4.1.1 to unlock they will hard brick. Specifically flashing the 4.1.X bootloaders cause the brick.
also on 4.3 this appears to work and retains sim unlock SHA256 OFF
Dail *#197328640#
Main Menu
[1] UMTS
[1] Debug Screen
[8] Phone Control
[6] Network Lock
[3]Perso SHA256 OFF
Wait a few seconds then press menu and go all the way back to the main menu.
[5] run EFS Sync()
Reboot and done.
Click to expand...
Click to collapse
Thank you.

Deleted.
Sent from my SAMSUNG-SGH-I747 using Tapatalk

-Mr. X- said:
You should probably put a large RED warning in the first post that if they down grade from 4.3 to 4.1.1 to unlock they will hard brick. Specifically flashing the 4.1.X bootloaders cause the brick.
also on 4.3 this appears to work and retains sim unlock SHA256 OFF
Dail *#197328640#
Main Menu
[1] UMTS
[1] Debug Screen
[8] Phone Control
[6] Network Lock
[3]Perso SHA256 OFF
Wait a few seconds then press menu and go all the way back to the main menu.
[5] run EFS Sync()
Reboot and done.
Click to expand...
Click to collapse
Did not work on Rogers i747M 4.3

smrsxn said:
Deleted.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
Why deleted?

Unlock worked on i747.

Where to get Sim unlock for cheap

What website you guys recommend to get my gs3 i747 unlock for under $10?
Cellunlocker wants $29.99 .to expensive.
Sent from my XT1034 using xda app-developers app

What ROM are you running? If you're on 4.1.1, you can unlock it for free using the free method posted on XDA.

Stock 4.3
Sent from my XT1034 using xda app-developers app

Did this not work for you?
http://forum.xda-developers.com/showthread.php?p=38764168
Or
http://forum.xda-developers.com/showthread.php?t=2024361
Sent from my SAMSUNG-SGH-I747 using Tapatalk

spasch said:
Did this not work for you?
http://forum.xda-developers.com/showthread.php?p=38764168
Or
http://forum.xda-developers.com/showthread.php?t=2024361
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
didnt work i have to be on 4.1.1 . and it says i can brick device if try to downgrade

littlegreenalien said:
didnt work i have to be on 4.1.1 . and it says i can brick device if try to downgrade
Click to expand...
Click to collapse
I did mine a long time ago. After reading quite a bit you may be right for the time being. The best I have found without a risk of a brick is this:
There is a lot of confusion about unlocking in this thread and elsewhere. Your S3 can still be unlocked after the 4.3 update, just keep in mind that most threads either have inaccurate information or miss essential steps.
Unlock codes and procedures often change or play musical chairs in major software updates. Prior to the problematic 4.3 update you could unlock your S3 with the cited procedure in this thread. This is a permanent unlock and would survive firmware changes. This only applies to touchwiz ROMs e.g. North American factory ROMs or custom ROMs that preserve the dialer codes. This unlocking procedure is also distinct from the carrier specific unlock codes or commercial unlockers who either have access to the official database or have figured out the key algorithm.
If your phone has not taken the 4.3 update yet:
Install the 4.1.1 stock touchwiz ROM and use this procedure to unlock. You can then revert back to your favourite firmware version after your phone has been unlocked.
Dial the following code on the phone keypad: *#197328640#
Main Menu > [1] UMTS > [1] Debug Screen > [8] Phone Control > [6] Network Lock > Options [3]Perso SHA256 OFF
After choosing this option, wait 30 seconds, then go back one step by pressing the Menu button then select back
Now you are in [6] Network Lock then choose [4] NW Lock NV Data INITIALIZE
You should see a message that says
SHA256_ENABLED_FLAG[0]
SHA256_OFF => Not Change
Choose [1] SHA256_ENABLED_FLAG
Wait 30 seconds, then press Menu > Back. Do not use the back key, choose back from the menu popup.
You should now see a message that says
MENU NOT EXIST
PRESS BACK KEY
Current Command is 118640 (if you don't see this message.. skip to alternate step below)
Note that the exact Command number may vary.. don't worry about that.
Wait another 30 seconds, then press Menu > Back. Do not use the back key, choose back from the menu popup
You should see a message that PERSO_NV_INIT is processing, then PERSO_NV_INIT is SUCCESSFUL
Now return to the SHA256 menu and turn Perso SHA256 back on
Back our of all menus and enjoy your unlocked S3
Alternate step. If you didn't receive the MENU NOT EXIST message, then use the back option in the menu popup until you see a menu what includes [6] Common.
Click on [6] Common and choose [6] NV REBUILD
You should now see a message that says:
Golden-Backup exist
You can Restore Cal/NV
Choose [4] Restore Backup
Your phone may freeze or change screens briefly, then should reboot
If you run into errors, look at this link for advice on how to proceed: How to unlock.. (techbeasts.com)
Enjoy your unlocked S3
If you have the 4.3 update:
Now you know that updates are evil or at least mess up your plans.
The unlock procedures have changed somewhat now and it seems that there are now several alternate procedures depending on your carrier.
Gambit #1
If you tried the above and got half way to find that menu item [4] NW Lock NV Data INITIALIZE was missing, then try the following. Note that menu item [4] may also be missing if your phone is already unlocked. So you might want to try a SIM from another carrier to confirm whether your phone really needs to be unlocked.
Dial the following code on the phone keypad: *#197328640#
Main Menu > [1] UMTS > [1] Debug Screen > [8] Phone Control > [6] Network Lock > Options [3]Perso SHA256 OFF
After choosing this option, wait 30 seconds, then go back one step by pressing the Menu button then select back
Now you are in [6] Network Lock and presumably you now find that there is no [4] NW Lock NV Data INITIALIZE menu item
If so, then press Menu > Back. Do not use the back key, choose back from the menu popup.
Now this is the step that most threads miss, tap on SHA256_ENABLED_FLAG.
This item may look like a message rather than a menu choice i.e. may not be enumerated. Tap it anyway
Now you may see one of several things.
If it appears that you are back to the starting menu, choose [1} UMTS again and follow the original steps and you should find that the missing menu item is now present, although it may be labeled NW Lock NV Data INITIALIZE or NV REBUILD. Or you may find yourself on a page that already has the initialize or rebuild option.
In either case, choose INTIALIZE or REBUILD, followed by the remaining steps as originally described.
If you get a message asking you to reboot your phone to finish, then do that instead of the remaining steps.
I'd recommend that after you are done that you return to the service menu again and ensure that SHA256 was re-enabled. The SHA256_ENABLED_FLAG should = 1 (not 0). If the flag status is 0, then choose the Perso SHA256 ON option.
Enjoy your unlocked S3
Gambit #2
If the above does is still missing key menu items on your phone, then try this alternate dialer code:
*#27663368378#
And then proceed as before.
However, if you encounter the following message:
Golden-Backup exist
Then follow the procedure in this link instead: How to unlock.. (techbeasts.com)
Enjoy your unlocked S3
Gambit #3
If you still have a stubborn phone, try the following dialer code
*#0011#
This will look like an informational screen with no menu choices.
Don't fear, the menu you want is just hidden. Continue with the steps in this link: How to unlock.. (unlockfaq.com)
Enjoy your unlocked S3
Oh no.. that didn't work either!
If all else fails, contact your provider and tell them that you will be traveling in elsewhere e.g. Europe and need to have your phone unlocked. Most carriers will provide you with a network (carrier) unlock code in this situation. Typically without charge, but it will vary by carrier. Or you can avail yourself of a commercial unlocking service. Google will find a googol [sic] of them for you.
Note that you need to insert a valid, non-blacklisted SIM from another carrier to be prompted to enter a network unlock code. It need not be active, just not blocked i.e. reported as lost /stolen. If you have any difficulties entering the code, have a look at this link.
Good luck
.
Sent from my SAMSUNG-SGH-I747 using Tapatalk

spasch said:
I did mine a long time ago. After reading quite a bit you may be right for the time being. The best I have found without a risk of a brick is this:
There is a lot of confusion about unlocking in this thread and elsewhere. Your S3 can still be unlocked after the 4.3 update, just keep in mind that most threads either have inaccurate information or miss essential steps.
Unlock codes and procedures often change or play musical chairs in major software updates. Prior to the problematic 4.3 update you could unlock your S3 with the cited procedure in this thread. This is a permanent unlock and would survive firmware changes. This only applies to touchwiz ROMs e.g. North American factory ROMs or custom ROMs that preserve the dialer codes. This unlocking procedure is also distinct from the carrier specific unlock codes or commercial unlockers who either have access to the official database or have figured out the key algorithm.
If your phone has not taken the 4.3 update yet:
Install the 4.1.1 stock touchwiz ROM and use this procedure to unlock. You can then revert back to your favourite firmware version after your phone has been unlocked.
Dial the following code on the phone keypad: *#197328640#
Main Menu > [1] UMTS > [1] Debug Screen > [8] Phone Control > [6] Network Lock > Options [3]Perso SHA256 OFF
After choosing this option, wait 30 seconds, then go back one step by pressing the Menu button then select back
Now you are in [6] Network Lock then choose [4] NW Lock NV Data INITIALIZE
You should see a message that says
SHA256_ENABLED_FLAG[0]
SHA256_OFF => Not Change
Choose [1] SHA256_ENABLED_FLAG
Wait 30 seconds, then press Menu > Back. Do not use the back key, choose back from the menu popup.
You should now see a message that says
MENU NOT EXIST
PRESS BACK KEY
Current Command is 118640 (if you don't see this message.. skip to alternate step below)
Note that the exact Command number may vary.. don't worry about that.
Wait another 30 seconds, then press Menu > Back. Do not use the back key, choose back from the menu popup
You should see a message that PERSO_NV_INIT is processing, then PERSO_NV_INIT is SUCCESSFUL
Now return to the SHA256 menu and turn Perso SHA256 back on
Back our of all menus and enjoy your unlocked S3
Alternate step. If you didn't receive the MENU NOT EXIST message, then use the back option in the menu popup until you see a menu what includes [6] Common.
Click on [6] Common and choose [6] NV REBUILD
You should now see a message that says:
Golden-Backup exist
You can Restore Cal/NV
Choose [4] Restore Backup
Your phone may freeze or change screens briefly, then should reboot
If you run into errors, look at this link for advice on how to proceed: How to unlock.. (techbeasts.com)
Enjoy your unlocked S3
If you have the 4.3 update:
Now you know that updates are evil or at least mess up your plans.
The unlock procedures have changed somewhat now and it seems that there are now several alternate procedures depending on your carrier.
Gambit #1
If you tried the above and got half way to find that menu item [4] NW Lock NV Data INITIALIZE was missing, then try the following. Note that menu item [4] may also be missing if your phone is already unlocked. So you might want to try a SIM from another carrier to confirm whether your phone really needs to be unlocked.
Dial the following code on the phone keypad: *#197328640#
Main Menu > [1] UMTS > [1] Debug Screen > [8] Phone Control > [6] Network Lock > Options [3]Perso SHA256 OFF
After choosing this option, wait 30 seconds, then go back one step by pressing the Menu button then select back
Now you are in [6] Network Lock and presumably you now find that there is no [4] NW Lock NV Data INITIALIZE menu item
If so, then press Menu > Back. Do not use the back key, choose back from the menu popup.
Now this is the step that most threads miss, tap on SHA256_ENABLED_FLAG.
This item may look like a message rather than a menu choice i.e. may not be enumerated. Tap it anyway
Now you may see one of several things.
If it appears that you are back to the starting menu, choose [1} UMTS again and follow the original steps and you should find that the missing menu item is now present, although it may be labeled NW Lock NV Data INITIALIZE or NV REBUILD. Or you may find yourself on a page that already has the initialize or rebuild option.
In either case, choose INTIALIZE or REBUILD, followed by the remaining steps as originally described.
If you get a message asking you to reboot your phone to finish, then do that instead of the remaining steps.
I'd recommend that after you are done that you return to the service menu again and ensure that SHA256 was re-enabled. The SHA256_ENABLED_FLAG should = 1 (not 0). If the flag status is 0, then choose the Perso SHA256 ON option.
Enjoy your unlocked S3
Gambit #2
If the above does is still missing key menu items on your phone, then try this alternate dialer code:
*#27663368378#
And then proceed as before.
However, if you encounter the following message:
Golden-Backup exist
Then follow the procedure in this link instead: How to unlock.. (techbeasts.com)
Enjoy your unlocked S3
Gambit #3
If you still have a stubborn phone, try the following dialer code
*#0011#
This will look like an informational screen with no menu choices.
Don't fear, the menu you want is just hidden. Continue with the steps in this link: How to unlock.. (unlockfaq.com)
Enjoy your unlocked S3
Oh no.. that didn't work either!
If all else fails, contact your provider and tell them that you will be traveling in elsewhere e.g. Europe and need to have your phone unlocked. Most carriers will provide you with a network (carrier) unlock code in this situation. Typically without charge, but it will vary by carrier. Or you can avail yourself of a commercial unlocking service. Google will find a googol [sic] of them for you.
Note that you need to insert a valid, non-blacklisted SIM from another carrier to be prompted to enter a network unlock code. It need not be active, just not blocked i.e. reported as lost /stolen. If you have any difficulties entering the code, have a look at this link.
Good luck
.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
Thank you,Tried all those and non work i found this site where they charge me $6 hopefully its true

Did you by chance call AT&T and ask for it? I have had better luck with them than big red. If you have an account in good standing anyway.
Sent from my SAMSUNG-SGH-I747 using Tapatalk

My cousin has been with them for 2 years and they didn't want to give us code. talk to 4 different agents. Shes switching to tmobile anyway i had to pay $30 to unlock it. the other sire we order for $5.99 didnt work. they never send code
Sent from my XT1034 using xda app-developers app

I would like to know the cheapest place as well...
I tried to unlock it based on above (I am on 4.3) and no go.

I know the bootloader is locked in 4.3 but is the modem? maybe you could downgrade to the 4.1.1 modem and then unlock and reflash your 4.3?

blu422 said:
I know the bootloader is locked in 4.3 but is the modem? maybe you could downgrade to the 4.1.1 modem and then unlock and reflash your 4.3?
Click to expand...
Click to collapse
Is it the modem that gives access to the unlock options?

audit13 said:
Is it the modem that gives access to the unlock options?
Click to expand...
Click to collapse
I believe so

blu422 said:
I believe so
Click to expand...
Click to collapse
Even on a 4.3 ROM? That would be awesome.

audit13 said:
Even on a 4.3 ROM? That would be awesome.
Click to expand...
Click to collapse
well yeah

blu422 said:
well yeah
Click to expand...
Click to collapse
I didn't know this. I saw several posts from XDA members that were on 4.3 and wanted to unlock their phone for free. If they can just flash the modem, unlock, and reflash the modem, that would be pretty simple.

audit13 said:
I didn't know this. I saw several posts from XDA members that were on 4.3 and wanted to unlock their phone for free. If they can just flash the modem, unlock, and reflash the modem, that would be pretty simple.
Click to expand...
Click to collapse
indeed we just need a brave user to try it risking his phone's life. or someone more knowledgeable than me that already knows the answer.

blu422 said:
indeed we just need a brave user to try it risking his phone's life. or someone more knowledgeable than me that already knows the answer.
Click to expand...
Click to collapse
Do you know anyone that has actually gone through the process of unlocking by installing the 4.1.1 modem?
I saw a post about someone doing this with a 4.1.2 rom but not a 4.3 ROM.

audit13 said:
Do you know anyone that has actually gone through the process of unlocking by installing the 4.1.1 modem?
I saw a post about someone doing this with a 4.1.2 rom but not a 4.3 ROM.
Click to expand...
Click to collapse
nope i just thought it might be possible

blu422 said:
nope i just thought it might be possible
Click to expand...
Click to collapse
In another thread, an XDA member had a stock 4.1.1 ROM (modem too) running on a 4.3 bootloader and the required menu options for unlocking the phone were not present which leads me to conclude that you need to be completely stock 4.1.1, including the bootloader.