Related
HELLO FRIENDS..
CWM RECOVERY 6.0.4.9 [UPDATE 2014]:
FOR DUAL SIM 4.2.2
- New CWM Recovery 6.0.4.9 for New Firmware 15.2.A.2.5
- It has new kernel included..
- FINGER SWIPE CONTROL ( JUST SWIPE YOUR FINGER UP/DOWN AND FOR SELECTION SWIPE TO RIGHT SIDE )
- RAINBOW EFFECT { FONT COLUORS ARE CHANGING } ( ENABLE IT BY QUICKLY MOVING YOUR FINGER UP SIDE 5-6 TIMES )
FOR SINGLE SIM 4.1.2
- New CWM Recovery 6.0.4.9 for New Firmware 15.1.C.2.8
- It has new kernel included..
- FINGER SWIPE CONTROL ( JUST SWIPE YOUR FINGER UP/DOWN AND FOR SELECTION SWIPE TO RIGHT SIDE )
- RAINBOW EFFECT { FONT COLUORS ARE CHANGING } ( ENABLE IT BY QUICKLY MOVING YOUR FINGER UP SIDE 5-6 TIMES )
CWM RECOVERY FOR 4.3
- New CWM Recovery 6.0.4.9 for New Firmware 15.4.A.0.23 & 15.5.A.0.18 & 15.4.A.1.9 & 15.5.A.1.5
- It has new kernel included..
[UPDATED] Try This Advanced Recovery
PhilZ Touch 6.50.6 [Nicki] [CWM 6.0.5.0 Advanced Edition]
Link: http://forum.xda-developers.com/xperia-m/development/recovery-philz-touch-6-41-6-xm-dual-t2795778
JUST FLASH VIA FLASHTOOL IN FASTBOOT MODE
If u find this post useful than HIT THANKS BUTTON
- If you find this Recovery is useful to you than it is requested to give 5 STAR RATING TO THIS POST
CREDIT:
- alvinhochun for his tool
Can I use this recovery on my C1905 cross-flashed C2005 firmware?
Anyway, good job mate
AyamPushUp said:
Can I use this recovery on my C1905 cross-flashed C2005 firmware?
Anyway, good job mate
Click to expand...
Click to collapse
Yes i think it will work.
Any known bugs??
For bugs, just see this or this.
tried downloading since morning but cannot download
says bandwidth error
upload elsewhere thanks
op i m sry to create a mirror of ur kernel...but ur link is long dead..and u r not active..so that i uploaded to dev-host...if u want add my link to op..
here link for kernel+cwm for c2004 or c2005...http://d-h.st/HB8
sorry friends for replying after long time..
I will definitely fix this link..
After flashing this on my c2004, i was notified by update centre that a 'new system update available' 15.2.A.2.5, but i am already on 15.2.A.2.5, how to remove the notification.
Sent from my C2004 using Tapatalk
just go to update center and go to the settings then untick notifications and notification vibration after some time the notification will be disappeared
Hit Thanks If I helped U
Sent from my Sony Xperia M Dual C2004
how can I install CWM on my C2005 with LOCKED BL?
no u cannot install it on a locked BL its for Unlocked BL
Sent from my Sony Xperia M Dual C2004
haresh311999 said:
just go to update center and go to the settings then untick notifications and notification vibration after some time the notification will be disappeared
Hit Thanks If I helped U
Sent from my Sony Xperia M Dual C2004
Click to expand...
Click to collapse
There is no option to turn off notification in update center.
Sent from my C2004 using Tapatalk
Sent from my Sony Xperia M Dual C2004
Just untick all the options under notification settings
Sent from my Sony Xperia M Dual C2004
haresh311999 said:
Just untick all the options under notification settings
Sent from my Sony Xperia M Dual C2004
Click to expand...
Click to collapse
Already I done that but no use. Now, I just removed update center in my phone and got rid from the problem
Sent from my C2004 using Tapatalk
ansebovi said:
op i m sry to create a mirror of ur kernel...but ur link is long dead..and u r not active..so that i uploaded to dev-host...if u want add my link to op..
here link for kernel+cwm for c2004 or c2005...http://d-h.st/HB8
Click to expand...
Click to collapse
What type of kernel is it.Stock or custom?
sanjib734 said:
What type of kernel is it.Stock or custom?
Click to expand...
Click to collapse
Stock with inbuilt CWM
hey guys this is stock kernel from previous c2004 firmware..
so if u flashed this cwm on new firmware than this update notification situation will come..
to avoid this notification u just install system tuner and go to startups and than untick the update center thats it..
this will disable update notification..
reboot your phone...
engineer_dhaval said:
hey guys this is stock kernel from previous c2004 firmware..
so if u flashed this cwm on new firmware than this update notification situation will come..
to avoid this notification u just install system tuner and go to startups and than untick the update center thats it..
this will disable update notification..
reboot your phone...
Click to expand...
Click to collapse
can u able to create new firmware kernel with CWM?
the characters renders incorrectly more info and demostration:
and i post this gt-i9080 problem here because the gt-i9080 and gt-i9082 is the same only for the dual sim
-y o u t u .b e / r l _ D q Z C D p D 0 -
1Maxter1 said:
the characters renders incorrectly more info and demostration:
and i post this gt-i9080 problem here because the gt-i9080 and gt-i9082 is the same only for the dual sim
-y o u t u .b e / r l _ D q Z C D p D 0 -
Click to expand...
Click to collapse
try force gpu rendering or full gpu rendering script
it may work buddy
aditya rathee said:
try force gpu rendering or full gpu rendering script
it may work buddy
Click to expand...
Click to collapse
i tried force gpu render and appears the same problem
1Maxter1 said:
i tried force gpu render and appears the same problem
Click to expand...
Click to collapse
a script for it is also available
try it and then tell about the result bro
Update was fixed the issue
sharingan said:
a script for it is also available
try it and then tell about the result bro
Click to expand...
Click to collapse
After a months I update to 4.2.2 and the issue has solved but I changed the i9080 to a i9500.
Thanks for trying to help me.
Bored, found something new for my ZL. This is how to toggle the LEDs of the Xperia ZL -
0-255 intensity ng LED. 0 off, 255 full power ON.
3 LEDs - RED, GREEN, BLUE
They are hiding here -
/sys/class/leds/lm3533-blue/brightness
/sys/class/leds/lm3533-green/brightness
/sys/class/leds/lm3533-red/brightness
sample code to turn ON the RED LED
echo 255 > /sys/class/leds/lm3533-red/brightness
MIX and MATCH to get desired color -
WHITE - RED, GREEN, BLUE = 255
YELLOW - RED=255, GREEN=255, BLUE = 0
ENJOY!
Xperia SP as my inspiration, they have disco lights mod! Credits to CM11 team, Im reading their bootimg scripts and found the values there.
http://www.mediafire.com/view/f3oeo4oxbtyfgm4/10LED
- put in /etc/init.d/
- chmod 755
- reboot and enjoy!
ryanrudolf said:
Bored, found something new for my ZL. This is how to toggle the LEDs of the Xperia ZL -
0-255 intensity ng LED. 0 off, 255 full power ON.
3 LEDs - RED, GREEN, BLUE
They are hiding here -
/sys/class/leds/lm3533-blue/brightness
/sys/class/leds/lm3533-green/brightness
/sys/class/leds/lm3533-red/brightness
sample code to turn ON the RED LED
echo 255 > /sys/class/leds/lm3533-red/brightness
MIX and MATCH to get desired color -
WHITE - RED, GREEN, BLUE = 255
YELLOW - RED=255, GREEN=255, BLUE = 0
ENJOY!
Xperia SP as my inspiration, they have disco lights mod! Credits to CM11 team, Im reading their bootimg scripts and found the values there.
http://www.mediafire.com/view/f3oeo4oxbtyfgm4/10LED
- put in /etc/init.d/
- chmod 755
- reboot and enjoy!
Click to expand...
Click to collapse
awesome was waiting for this !!!
can u get it integrated on the walkman option like it does on the sp ?
edit : sorry for this but how exactly does this work .. on sp it lights up in walkman ..after ticking on the disco light option thing in setting of the app .. so does it do it here too ?
demonicangell™ said:
awesome was waiting for this !!!
can u get it integrated on the walkman option like it does on the sp ?
edit : sorry for this but how exactly does this work .. on sp it lights up in walkman ..after ticking on the disco light option thing in setting of the app .. so does it do it here too ?
Click to expand...
Click to collapse
you will see the disco lights when you boot up the phone. from power off to android boot animation it will light up the LEDs.
ryanrudolf said:
you will see the disco lights when you boot up the phone. from power off to android boot animation it will light up the LEDs.
Click to expand...
Click to collapse
Will this interfere in the boot sequence lights for triggering recovery?
Sent from my C6503 using Tapatalk
ATRIXXIRTA said:
Will this interfere in the boot sequence lights for triggering recovery?
Sent from my C6503 using Tapatalk
Click to expand...
Click to collapse
boot sequence lights for entering recovery are inside the boot.img (CM11). this wont interfere, it will only work during boot process via the init.d
ryanrudolf said:
boot sequence lights for entering recovery are inside the boot.img (CM11). this wont interfere, it will only work during boot process via the init.d
Click to expand...
Click to collapse
possible to get disco lights during incoming call ?
hi..can anyone help me how to change font in Note 2 Kitkat 4.4.2 such as in this picture? that pic is jellybean
should be settings > display > font
though personally i use rom toolbox for installing and changing of fonts
fliptechnologies said:
should be settings > display > font
though personally i use rom toolbox for installing and changing of fonts
Click to expand...
Click to collapse
I used Mr.Luong™ ROM V4.2 XXUFNG4..dont have option ..settings > display > font
Can u pls help me out with this problem.... I hav changed my font once.... After that this happened.. Menu titles are showing three dots.. Also online status is showing with three dots.. I hav tried with getting back to stock rom.. Even i did factory reset.. I cudnt get a solution.. Pls help....!!!! Its irritating
Sent from my Micromax A311 using XDA Free mobile app
Q&A for Corsifame 2 rom Kitkat themed
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
problem with lockscreen
Heloo i gt a problem with my lockscreen its not fitting im the screen proprly.. nd my device has bcm a bit slow aftr dat updting rom. Im using galxy fame gt-s6810p xxamd2 u wnt find dis model coz its manufactured in middle east may b i cnt send u the screenshot coz im not allowed ...
anna_anderson said:
Heloo i gt a problem with my lockscreen its not fitting im the screen proprly.. nd my device has bcm a bit slow aftr dat updting rom. Im using galxy fame gt-s6810p xxamd2 u wnt find dis model coz its manufactured in middle east may b i cnt send u the screenshot coz im not allowed ...
Click to expand...
Click to collapse
If its slow try to uninstall unused apps and disable system apps you don't use. Watchout which you disable. Also try wiping cache/dalvik-cache. Why aren't you allowed to send screenshot? If you mean that you can't send it to him like that then just post it as attachment. I don't have the device so I can't recreate it.
anna_anderson said:
Heloo i gt a problem with my lockscreen its not fitting im the screen proprly.. nd my device has bcm a bit slow aftr dat updting rom. Im using galxy fame gt-s6810p xxamd2 u wnt find dis model coz its manufactured in middle east may b i cnt send u the screenshot coz im not allowed ...
Click to expand...
Click to collapse
Maybe u try corsifame 1 or 2 (not kitkat themed) . I also have s6810pxxamd2 . and i'm not having any problems with these ROM
and use mods like pure-performance ,pure graphics this will help u a bit from lag.
toshiro71 said:
Maybe u try corsifame 1 or 2 (not kitkat themed) . I also have s6810pxxamd2 . and i'm not having any problems with these ROM
and use mods like pure-performance ,pure graphics this will help u a bit from lag.
Click to expand...
Click to collapse
and supercharge + Fly On Mod ,,make smooth ,,and highly multitasking
hellooo
toshiro71 said:
Maybe u try corsifame 1 or 2 (not kitkat themed) . I also have s6810pxxamd2 . and i'm not having any problems with these ROM
and use mods like pure-performance ,pure graphics this will help u a bit from lag.
Click to expand...
Click to collapse
Can u plzzx send me the link of the current rom which u r using nd the mods which u mentioned..
Thnkyou..!!
anna_anderson said:
Can u plzzx send me the link of the current rom which u r using nd the mods which u mentioned..
Thnkyou..!!
Click to expand...
Click to collapse
I'm currently using Corsifame 1 (corsifame 2 is better , i just didnt use it becuz of some icon stuff) and . im using malive booster mod and viper4android(sound mod) and pure graphics.
corsifame 1 link >>> http://forum.xda-developers.com/showthread.php?t=2705741
corsifame 2 link >> http://forum.xda-developers.com/showthread.php?t=2798571
Other Links >>> Just use search option Take your time
And about lockscreen issue, i guess this may fix it. If u hav root explorer or any which can acess to root directory.....
go to System>build.prop and open it with text editor and see if lcd_density=160( generally this causes lock screen not fit in screen as i've encounter it) . see screenshot below..
toshiro71 said:
Maybe u try corsifame 1 or 2 (not kitkat themed) . I also have s6810pxxamd2 . and i'm not having any problems with these ROM
and use mods like pure-performance ,pure graphics this will help u a bit from lag.
Click to expand...
Click to collapse
hey thnks fr the suggestion...nd i wnt to ask u 1 more thing that does gl tool wrk on my mob .. nd how to do the system partition ... i went to recovery nd did system partition ...but nothing happend.. again the 1st page of recovery came . no procces nothing it showed .. nw i will do the partition so i can run gl tools to play games .
thanks..
anna_anderson said:
hey thnks fr the suggestion...nd i wnt to ask u 1 more thing that does gl tool wrk on my mob .. nd how to do the system partition ... i went to recovery nd did system partition ...but nothing happend.. again the 1st page of recovery came . no procces nothing it showed .. nw i will do the partition so i can run gl tools to play games .
thanks.. ]
GL Tools works perfectly, no issue at all, and u dont need partition to use GL Tools . and its is bug in CWM about making partition i guess(i never tried though xD) , I'm using GL Tools on like every game to run even more smoothly
Just install Gl Tools>open it>enable ur mobile data>choose something(i fotgot the word)>and install>ur mobile will restart and u are fine to go
Good Luck
Click to expand...
Click to collapse
sorry about not fixing the issue coz im using wulsic's cm11. im very busy right now since i have many trainings required by my company but if i have time i'll look into it. oh and if you change the lcd density some samsung apps will force close so watch out.
blackwatch92 said:
sorry about not fixing the issue coz im using wulsic's cm11. im very busy right now since i have many trainings required by my company but if i have time i'll look into it. oh and if you change the lcd density some samsung apps will force close so watch out.
Click to expand...
Click to collapse
Google play store and service (idk about others) dont FC if u change density i've already tried those . No i wont because 160 is default density in fame . Trainings are great btw Good Luck
Is this custom rom work on fame s6812i dual sim?
hey toshiro i hav the same thing wriiten lcd_ something now hw do i fix?
i hav to edit?
Sent from my GT-S6810P using XDA Free mobile app
toshiro71 said:
Google play store and service (idk about others) dont FC if u change density i've already tried those . No i wont because 160 is default density in fame . Trainings are great btw Good Luck
Click to expand...
Click to collapse
anna_anderson said:
hey toshiro i hav the same thing wriiten lcd_ something now hw do i fix?
i hav to edit?
Sent from my GT-S6810P using XDA Free mobile app
Click to expand...
Click to collapse
I suggest not to change dpi because Phone app will crash every time you make a call because of the incall ui... Or with other words you won't be able to make or receive calls.. I tried every possible combination of dpi and didn't worked.. And another thing is that, in build.prop are 2 of the ro.sf.lcd_density like in the screens i attached. You can delete one of them or change the value on both, but if you change only in one, it won't change. Cheers!
Sent from my GT-I9300 using Tapatalk
hey... emotions are not.. supported in dis rom. in the notification emojis dosnt appears.. so whts the solution. ? thnxc.
Sent from my GT-S6810P using XDA Free mobile app
anna_anderson said:
hey... emotions are not.. supported in dis rom. in the notification emojis dosnt appears.. so whts the solution. ? thnxc.
Sent from my GT-S6810P using XDA Free mobile app
Click to expand...
Click to collapse
8sms has emoji and looks better.. To use only this app enter Settings>Applications>All, search for Messages and disable it, or else you will get notifications from both apps when you will receive a message. Cheers!
Sent from my GT-I9300 using Tapatalk
dude... but dats fr messaging. im trying to tell dt like whn some1 send me emoji on whts app the notification appears. but it dsnt show the emoji on notification panel. same like on insta i cant see the emojis.
Sent from my GT-S6810P using XDA Free mobile app
anna_anderson said:
dude... but dats fr messaging. im trying to tell dt like whn some1 send me emoji on whts app the notification appears. but it dsnt show the emoji on notification panel. same like on insta i cant see the emojis.
Sent from my GT-S6810P using XDA Free mobile app
Click to expand...
Click to collapse
I'm afraid there isn't a sollution for this.. Emoji support in notifications panel has been implemented only since Kitkat.. On jellybean you can see emoticons only in apps..
Sent from my GT-I9300 using Tapatalk
Battery icon not showing
Everything else works 100% , every time I go to settings -> battery Style I get Settings Stopped.
Discontinued/Abandoned
Sorry guys for not having support since cm11 is booting and stable:crying: