Develop Bugs

How to OC GPU?

I see that when running the neak kernel on the uNeak app, theres a section where there are steps for the GPU clock speeds. To oc do you just raise the last step or what? Do I have to add a step if so how do I add one?
Also what is the highest clock you guys have run GPU up to on the note 2? On my n7, I ran it up to 700mhz without issues and 750mhz with occasional lockups
I'd like to do this on carbon with the kernel it comes with if possible.
Sent from my GT-N7105 using Tapatalk 2

Bump?
Sent from my SGH-T889 using Tapatalk 2

nemesis93 said:
I see that when running the neak kernel on the uNeak app, theres a section where there are steps for the GPU clock speeds. To oc do you just raise the last step or what? Do I have to add a step if so how do I add one?
Also what is the highest clock you guys have run GPU up to on the note 2? On my n7, I ran it up to 700mhz without issues and 750mhz with occasional lockups
I'd like to do this on carbon with the kernel it comes with if possible.
Sent from my GT-N7105 using Tapatalk 2
Click to expand...
Click to collapse
I have OC'd up to 800MHz, but I usually keep it at 733MHz and underclock the CPU a bit. I don't think the Neak kernel supports OC'ing of any kind. You're better of with Perseus in that regards. By flashing the kernel the STweaks app is also automatically flashed and you can change settings from there.
Sent from my SGH-T889 using Tapatalk 2

minhajmsd said:
I have OC'd up to 800MHz, but I usually keep it at 733MHz and underclock the CPU a bit. I don't think the Neak kernel supports OC'ing of any kind. You're better of with Perseus in that regards. By flashing the kernel the STweaks app is also automatically flashed and you can change settings from there.
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
Oc is supported for the gpu in the neak I wanna know if its possible to add a step instead of overclocking every step or just the last step
Cpu oc is not available though.
Sent from my SGH-T889 using Tapatalk 2

Best Overclocking Setting On Lupus Kernel?

What's the best setting that provides the best gaming experience?

i always use this setting
min: 249 or 364 mhz
max: 1401 mhz
govern: interactivex/smartassh3/smartassv2
in some roms smart ass v2 or h3 is best govern but in some of them its better to use interactivex

min : 249
max : 1209
governor : smartassv2 or smartassh3

Thanks. And what about the scheduler?

Sio
Sent from my Xperia Play using xda premium

Mine
min : 364
max : 1408
governor : interactivex/sio

Maybe little off topic but what difference between Smartass v2 and h3?
Sent from my R800i using xda app-developers app

better battry life in h3

pedyvirus said:
better battry life in h3
Click to expand...
Click to collapse
Thanks. So h3 is more battery saver?
Sent from my R800i using xda app-developers app

bartmw said:
Thanks. So h3 is more battery saver?
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
In theory yes. But you will sacrifice gaming fps.

Lupus kernel takes time to boot
I'm using Neo V with cm10 and Lupus480p kernel, but this Lupus logo which appears during boot takes like forever before the cyanogenmod animation starts, any way to improve the boot time? If not which is the best kernel to go with my configuration.

My stuff
min= 0.1ghz - Standby clocks to lowest saving alot of battery!
max= 1.2ghz - little tiny bump for gaming as my rom can already handle most games i play
govenor= inteldemand2
schedular= row
Sent from my R800 - Currently testing the Pizza Engine

Usually I use max 1,6 Ghz with performance governor and sio i/o, this always runs the CPU @ 1,6. Drains battery fast, but great gaming...

[Q] My max CPU freq locked at 1.3 ghz?

hey guys recently i have noticed something while benchmarking.....my max cpu frequency is locked at 1.3 ghz...i use xm 305 with arhd 21 and if i set my max freq to 1.5 ghz with performance governor on so it should clock my cpu to 1.5 ghz regardless what i do right????but my cpu is still displayed to be at 1.3 ghz(its displaying in trickster app info page)
i tried setting min freq to 1.5 ghz and it is still clocked at 1.3 ghz???
because of that i am kinda lagging in vice city and getting a little low score in benchmarking....
so should i reflash the kernel??or use different app?

Turn power saving off
Sent from my HTC One X using xda app-developers app

Stefan0vic said:
Turn power saving off
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
it is off -_-...still turned on and off again and my phone is still at 1.3 ghz -.-

aseferfan said:
it is off -_-...still turned on and off again and my phone is still at 1.3 ghz -.-
Click to expand...
Click to collapse
if you use Set-Cpu see if u have some Profile on that cap cpu at 1.3Ghz

It's XM305 that is at fault. On ARHD21 and XM305 I, and others, have frequency locked at 1.3GHz.
XMister isn't available until September I think when he should return.
Change kernel and all should be well.

Tigerlight said:
It's XM305 that is at fault. On ARHD21 and XM305 I, and others, have frequency locked at 1.3GHz.
XMister isn't available until September I think when he should return.
Change kernel and all should be well.
Click to expand...
Click to collapse
ah,thought so.......
so i guess all xm version have this problem?or is there a version which doesnt have this...?
also your using trip's kernel...is this the thread?
http://forum.xda-developers.com/showthread.php?t=2307051
gonna try trips kernel

aseferfan said:
ah,thought so.......
so i guess all xm version have this problem?or is there a version which doesnt have this...?
also your using trip's kernel...is this the thread?
http://forum.xda-developers.com/showthread.php?t=2307051
gonna try trips kernel
Click to expand...
Click to collapse
No, not all of them do. I know for a FACT #285 works fine because I was using that before #305.
I tested #303 and #304 and they had the same issue.
Beyond that I don't know.
I tested Trip's NEXT Tegra 4, very nice and fast, but found the battery usage a little high and it's a little light on features, no S2W or LP OC for example.
ATM I am using n3okernel v44 and very happy with it.

Tigerlight said:
No, not all of them do. I know for a FACT #285 works fine because I was using that before #305.
I tested #303 and #304 and they had the same issue.
Beyond that I don't know.
I tested Trip's NEXT Tegra 4, very nice and fast, but found the battery usage a little high and it's a little light on features, no S2W or LP OC for example.
ATM I am using n3okernel v44 and very happy with it.
Click to expand...
Click to collapse
ah,thanks for the info :good:
guess i will try n3o's ncx and trip kernel

aseferfan said:
ah,thanks for the info :good:
guess i will try n3o's ncx and trip kernel
Click to expand...
Click to collapse
Try trickster mod to change the cpu speed.
Sent from my HTC One X using xda app-developers app

treebill said:
Try trickster mod to change the cpu speed.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Trickster, SetCPU, fauxClock, System Tuner, they will all let you SET max CPU speed to 1.5GHz but there is something in the kernel clock-locking some CPU's at 1.3GHz and until XMister returns...

Gpu overclock up to 320Mhz

Hello everybody!
Have anyone overclocked gpu on xperia s? I want to know how phone working and is any problems with it? I don't want to burn my motherboard.
Sent from my LT26i using xda premium

I've overclocked mine using Trinity's kernel without any problems
Sent from my Xperia Slow LT26i

You need a unlocked bootloader
And a custom kernel
I recomend
Trinity kernel for general performance
Forzaferrarileo for a great balance
And doomkernel for stability and balance
Sent from my LT26i using XDA Premium 4 mobile app

I use DooMKerneL and kernel tuner app to overclock gpu to upto 320Mhz.. and yeah, you need to have bootloader unlocked..
Sent from my LT26i using xda app-developers app

mnashfaq said:
I use DooMKerneL and kernel tuner app to overclock gpu to upto 320Mhz.. and yeah, you need to have bootloader unlocked..
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
can u post here a diffrence between stock mhz and oc-ed one?? Im curious how much power does that give
Im ising pureslim 4.4 now so no oc for me now but just asking ;p

200mhz 2d
266mhz 3d
As oposed to
266mhz 2d
320mhz 3d
With an OC your ui will become smoother and games will lag less
Also some benchmarking apps prove that you can beat a samsung galaxy s3
Sent from my LT26i using XDA Premium 4 mobile app

UlvarinPL said:
can u post here a diffrence between stock mhz and oc-ed one?? Im curious how much power does that give
Im ising pureslim 4.4 now so no oc for me now but just asking ;p
Click to expand...
Click to collapse
There you go.. say thanks to envious_data.. couldn't have explained it better.. Normally the clock for,
2D - 200Mhz
3D - 266Mhz
But we can overclock gpu to obtain,
2D - 266Mhz
3D - 320Mhz
Phone will run with no lag at all.. And it's super smooth.. I haven't tested it's effect on the battery yet though.. I don't actually use it much.. Unless if I want to play Asphalt 8 without lag..
Hope you understood..
Thank me if I helped..

mnashfaq said:
There you go.. say thanks to envious_data.. couldn't have explained it better.. Normally the clock for,
2D - 200Mhz
3D - 266Mhz
But we can overclock gpu to obtain,
2D - 266Mhz
3D - 320Mhz
Phone will run with no lag at all.. And it's super smooth.. I haven't tested it's effect on the battery yet though.. I don't actually use it much.. Unless if I want to play Asphalt 8 without lag..
Hope you understood..
Thank me if I helped..
Click to expand...
Click to collapse
the effect on battery is almost un noticable,
this is because its a small change (as oposed to a cpu oc (much higher frequencys and higher voltages required)
xperia s uses gpu and cpu to display
and finaly most kernels with a gpu oc usualy have a gpu undervolt meaning per frequency step it uses less power as oposed to stock
<(｀^´)> knowing is good!!!
Sent from my LT26i using XDA Premium 4 mobile app

Envious_Data said:
the effect on battery is almost un noticable,
this is because its a small change (as oposed to a cpu oc (much higher frequencys and higher voltages required)
xperia s uses gpu and cpu to display
and finaly most kernels with a gpu oc usualy have a gpu undervolt meaning per frequency step it uses less power as oposed to stock
<(｀^´)> knowing is good!!!
Sent from my LT26i using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I get this problem sometimes.. My 2D gpu frequencies cannot be changed.. it might be because of mp-decision but isn't DooMKerneL supposed to have its own mp-decision? if i cant get past this problem, can you give me a link to the latest trinity kernel for Xperia S..? If its not asking for too much..

mnashfaq said:
I get this problem sometimes.. My 2D gpu frequencies cannot be changed.. it might be because of mp-decision but isn't DooMKerneL supposed to have its own mp-decision? if i cant get past this problem, can you give me a link to the latest trinity kernel for Xperia S..? If its not asking for too much..
Click to expand...
Click to collapse
doomkernel doesent have 2d overclock
doomkernel used the stock mpdecision
also no need for a 2d oc unless you dont like laggy opengl based games

[Q] best governor to play mc5 ?

hi guys
i just downloaded modern combat 5 on my xperia s running existenz but it lags so much
so what kernel is the best and what governors are best to play it?
thanks in advance

Come on guys

zaidx said:
Come on guys
Click to expand...
Click to collapse
Doomkernel v06 and governors performance only your batter don't like this governors ? in this kernel you can oc CPU and gpu.
zaidx said:
hi guys
i just downloaded modern combat 5 on my xperia s running existenz but it lags so much
so what kernel is the best and what governors are best to play it?
thanks in advance
Click to expand...
Click to collapse
LT26i tap from Poland

Gold_Phenix said:
Doomkernel v06 and governors performance only your batter don't like this governors ? in this kernel you can oc CPU and gpu.
LT26i tap from Poland
Click to expand...
Click to collapse
i didn't get anything
can you speak english LOL

Set governor to performance and at 1.5 ghz however this will shorten the battery life
Sent from my One X using XDA Premium 4 mobile app