Related
I just purchased an Otterbox Defender for $31.95 on eBay (an excellent deal! ). I just wanted to see if the case makes the phone more difficult to use and if there are any problems that have arisen to anyone as a result of it.
I used the defender for a day and returned it. For one, i forgot how much of a non-fan i am of soft shells/cases.... since they seem to attract dust from other dimensions sometimes. The holster is nice... but in order to clip it in or take it out, it usually seemed to be a two-hand job, so that kinda defeated the purpose to me. It also seemed to make it slightly more difficult to actually get an accurate read with the fingerprint sensor.... i believe mostly due to the silicon outer shell, which as you swipe your finger, would peel back somewhat and make it hard to actually get a complete scan without stopping short or something like that.
elementaldragon said:
I used the defender for a day and returned it. For one, i forgot how much of a non-fan i am of soft shells/cases.... since they seem to attract dust from other dimensions sometimes. The holster is nice... but in order to clip it in or take it out, it usually seemed to be a two-hand job, so that kinda defeated the purpose to me. It also seemed to make it slightly more difficult to actually get an accurate read with the fingerprint sensor.... i believe mostly due to the silicon outer shell, which as you swipe your finger, would peel back somewhat and make it hard to actually get a complete scan without stopping short or something like that.
Click to expand...
Click to collapse
I've used Defenders before with my Nexus One & HTC HD2, and loved them though they were very bulky, but I thought the extra protection was worth it (just in case). I Ask because the my Defender for my N1 had problems with the buttons and they weren't really responsive and dust always got in the screen from the hole for the trackball. Thanks for your feedback! I'm planning on painting the plastic shell either red or white since I've always envied the iPhones multitude of colors
I have had mine in a defender since day one. I used it without for about 1/2 a day then loaded it in. I own a construction company so i am out in the dirt and weather constantly so the otter box is almost a must. I haven't noticed any loss of functionality. It takes a few times to learn how to unsnap the latch with the knuckle of your index finger as you remove the phone with one hand but it works once you learn the motion. No problems whatsoever using the fingerprint unlock, it is a pretty cool feature. I did notice the screen was not as sensitive for about 5 minutes until the plastic cover built in the case settled down to it.
Jack
I have the defender on mine..no problems so far..yes it makes the phone a little bigger. Its the first time that I am using such a case.
I quickly figured out how to snap it in and out of the belt clip with one hand.
I also have mine in a Defender case - However i ripped out the built in screen protector in the Defender case - those things are lame... I have a screen protector i put on within 10 seconds of opening the box for the phone - my screen has never been touched since taken out of the box...
I have no issues with the Otterbox Defender Case or Holster whatsoever...
Not to hijack the thread but the Otterbox Commuter is an extremely solid case that gives excellent protection without the bulk or the soft exterior of the Defender. I used one on my iPhone 4 for the past 6 months and loved it. Waiting on that model to show up for the Atrix now.
HarleyDude said:
Not to hijack the thread but the Otterbox Commuter is an extremely solid case that gives excellent protection without the bulk or the soft exterior of the Defender. I used one on my iPhone 4 for the past 6 months and loved it. Waiting on that model to show up for the Atrix now.
Click to expand...
Click to collapse
They already have one for the Atrix....
jgc121 said:
I also have mine in a Defender case - However i ripped out the built in screen protector in the Defender case - those things are lame... I have a screen protector i put on within 10 seconds of opening the box for the phone - my screen has never been touched since taken out of the box...
I have no issues with the Otterbox Defender Case or Holster whatsoever...
Click to expand...
Click to collapse
This. I bought my Atrix along with some anti-glares and an Otterbox Defender. I quickly realized how worthless the Otterbox's built-in screen protector is (and how muddy it makes the screen look), and promptly ripped it out. I got used to carrying my Captivate in a Defender, so I was already used to the holstering/unholstering procedure. You do have to make sure not to rub your finger against the shell when using the fingerprint scanner, but it's a pretty easy technique to learn.
ive had quite a few of them there great for protection but forget using it with a dock
Zephyrs said:
They already have one for the Atrix....
Click to expand...
Click to collapse
Right but I am waiting for it to show up in a store here in San Antonio. No luck so far, hopefully this week.
The only dock I am interested in is the car dock. Will either of the Otterbox cases (defender or commuter) work with the car dock?
tonyantonucci said:
The only dock I am interested in is the car dock. Will either of the Otterbox cases (defender or commuter) work with the car dock?
Click to expand...
Click to collapse
No........
Can anyone tell me if the Atrix overheats in an otterbox?
I live near atlanta and it is like a tropical rainforest in the summertime. Humidity and heat off the charts, will my phone melt inside this thing?
SquareBare said:
Can anyone tell me if the Atrix overheats in an otterbox?
I live near atlanta and it is like a tropical rainforest in the summertime. Humidity and heat off the charts, will my phone melt inside this thing?
Click to expand...
Click to collapse
It shouldn't. Personally, I think the Atrix runs a little cooler than the iPhones and both my parents have the defenders for their iPhones and neither of them have had any issues.
HarleyDude said:
Right but I am waiting for it to show up in a store here in San Antonio. No luck so far, hopefully this week.
Click to expand...
Click to collapse
you can get it for $20 off on amazon unless you need to pick it up in a brick and mortar establishment
SquareBare said:
Can anyone tell me if the Atrix overheats in an otterbox?
I live near atlanta and it is like a tropical rainforest in the summertime. Humidity and heat off the charts, will my phone melt inside this thing?
Click to expand...
Click to collapse
I don't foresee any heat issues whatsoever with mine. Gets slightly warm sometimes but nothing problematic. In ATL as well.
http://www.amazon.com/gp/product/B0069V9RSU/ref=oh_o02_s00_i00_details
Anyone have any experience with these?
Its in the mail now, should be here Monday.
Will post pics and opinions.
EDIT:
this case is awesome
the fit is perfect, looks great
didnt make it as bulky as i though it would
was running down the stairs into unfinished basement, phone fell out of sweatshirt pocket with all the downward momentum onto concrete
bounced off the floor, not even a mark anywhere
IMPORTAINT:
i think i have discovered something awesome
need someone's thoughts on this
i removed the battery cover, and put on the case, AND ITS EVEN THINNER
i will not be replacing my battery cover after this
someone try this, and let me know what you think
one thing that was semi disappointing,
the black case was a gloss finish, was hoping for matte
will be taking some fine sandpaper to it for a fix
p.s. sorry for all the caps, but if i was telling this to someone, i, in face, would probably raise my voice significantly
i feel like i have made a revolutionary discovery, and perhaps someone should design cases with this in mind
p.p.s. was going to take pics with and without the battery cover, but looks the same, just without the cover the lip in the front seems bigger, if the case was designed for this, it may have been 1.5-2 mm thinner
Using the green one now and love it!
Sent from my SPH-D710 using xda premium
newalker91 said:
They coat the plastic in a soft touch rubber surface to add grip and comfort.
Click to expand...
Click to collapse
Awesome, wish i found a white one now
edit: OMG i didnt even look, gonna have to get another one
http://www.amazon.com/Natural-Ivory...E0/ref=sr_1_17?ie=UTF8&qid=1323657982&sr=8-17
and this one for when cyanogen comes to our awesome devices
http://www.amazon.com/Natural-Turqu...RW/ref=sr_1_30?ie=UTF8&qid=1323658039&sr=8-30
HOw is it with getting to your volume or power buttons?
OMG i cant wait, hope its here tomorrow
my average phone life is about 3 months, really hoping to change that with this phone
just need it to survive till april, got another upgrade then, hope the sgs3 will be at sprint by that time
I had one of these on an iphone. I love it for the 3 months that the silicone lasted before it was stretched out and ugly. I guess for $4 you could replace them that often though without issue.
THIS CASE IS AWESOME
the fit is perfect, looks great
didnt make it as bulky as i though it would
was running down the stairs into unfinished basement, phone fell out of sweatshirt pocket with all the downward momentum onto concrete
bounced off the floor, not even a mark anywhere
IMPORTAINT:
i think i have discovered something awesome
need someone's thoughts on this
i removed the battery cover, and put on the case, AND ITS EVEN THINNER
i will not be replacing my battery cover after this
someone try this, and let me know what you think
one thing that was semi disappointing,
the black case was a gloss finish, was hoping for matte
will be taking some fine sandpaper to it for a fix
p.s. sorry for all the caps, but if i was telling this to someone, i, in face, would probably raise my voice significantly
i feel like i have made a revolutionary discovery, and perhaps someone should design cases with this in mind
p.p.s. was going to take pics with and without the battery cover, but looks the same, just without the cover the lip in the front seems bigger, if the case was designed for this, it may have been 1.5-2 mm thinner
Just thought I'd share some thoughts and pictures of a new case I got (I am a bit of a case junkie... usually end up with 10-15 cases per phone). Typically I either wouldn't be the first to post about a case (so I don't bother) or I don't feel strongly enough to share. I didn't see anything about this case, though... so here goes.
Link: http://www.amazon.com/gp/product/B0073YAAVK/ref=oh_o02_s00_i00_details
Various colors are available.
Notes: My device is the Verizon/LTE variant. This is a 2 piece case (black silicone base and red fishbone part).
Looks: I really think the case looks great, the pictures below won't do the colors justice but the black is a very nice matte black and the red is a very cool shade. The design is appealing, of course, or I wouldn't have purchased it... heh.
Fit: The fit is nearly perfect (might actually be perfect, this is the first time I'm ordering this style of case). One of the... ribs has a teeny tiny slight gap between it and the black base. It is not highly noticeable and I couldn't capture it well in a picture... but it's there.
I don't know if this is related to my phone being the VZW version.I don't know if this gap will go away as the case "settles in" since it is pressed down easily and doesn't feel too tight.I don't know if the case will fit with the extended battery, but since I have the extended battery at home I will test it out and report back.
Feel: I really like the feel of the red part on my hand when I'm holding it. It's not any extra grip or anything, but it is comfortable. The side grippyness is sufficient to not be slipping out of your hand, but it's not as grippy as many other cases that have a more textured design.
Function: The lip is sufficient to protect the screen when face down. The only thing I don't really like about the case is that the button parts aren't super noticeable by touch. Don't get me wrong, they work perfectly and you can feel them just fine when you are trying to, but when I am not paying attention I find myself not being certain where they are for a moment or two. I will probably get used to this, though.
Hope that gives everyone the info they're interested in... if you have questions, feel free to ask.
Thanks for the write up and pics. That case looks awesome. Curious if it would fit with the extended battery. Hope to hear back from you about it.
Sent from my Galaxy Nexus using Tapatalk
I tried it with the extended battery...
The silicone part fits perfectly, the fishbone part is a little close but does fit too.
The... spinal parts at the top on the back are slightly raised. Just a bit, only an issue if you are pretty nit picky... But it definitely fits and the clips/ribs and top/bottom fit perfectly.
Happy to confirm that the slight gap on one of the ribs has gone away over night. The case fits perfectly now (regular battery). Still fits good, but not great with the extended battery (might improve if left alone over time).
Thanks again. I might check into getting one of these on payday. The price isn't too bad even if I end up not liking it.
Zomb!e said:
Thanks again. I might check into getting one of these on payday. The price isn't too bad even if I end up not liking it.
Click to expand...
Click to collapse
No problem... good luck if you decide to buy it, hope you enjoy it. I myself am a case junkie. I've only had the Galaxy Nexus for 2 weeks and have 6 cases and I still have 20 or so for my last phone (Epic 4G Touch).
How is the silicone? Is it a dust/lint magnet and is it a chore to get out of medium to snug fitted pants?
redrapt0r said:
How is the silicone? Is it a dust/lint magnet and is it a chore to get out of medium to snug fitted pants?
Click to expand...
Click to collapse
No issues getting it in and it of pockets (even the tighter "cell phone pockets" a couple of my pants have).
It does acquire a bit of dust like you'd expect, but FAR less than most silicone cases I've had (guessing because a lot of it is covered/broken up by the fishbone part).
I tend to be pretty nit picky and with this case I do not feel the constant urge to clean it.
How "protective" would you say it is?
Just ordered a nexus and am looking at cases my primary concern is protection, although I want a cool look too.
How do you think this would compare to come of the other cases in terms of protecting against drops? I figure a self-described "case junkie" might be the person to ask this sort of comparative question to
Ok, so this is all just my opinion... I'm not dropping my phone on the ground to support this, lol.
Both pieces (the silicone case and the red fishbone that locks it into place and secures it) are pretty secure and well made. The lip around the face is a good size (not so tiny that it is insignificant and not so big to cause usage issues).
I won't sit here and pretend I have a rating system for this stuff, but I have some cases that feel like they won't protect anything beyond it sliding around the desk or a gentle fall onto some clouds/carpeting and some cases that feel like they will do their drop and protect it from a moderate drop and fall. This case falls into the latter/better group.
I like the appearance, but not so much that I'd use it if it was a piece of crap. Thankfully, it seems well made to me.
Woah
what struck me on first glance is the design!
Its quite eye catching
I'm just not sure if it is durable...
This look good. I bought one
Sent from my Galaxy Nexus using Tapatalk
Ok, so I just received my Titan Aegis case. Sorry, no pics as I don't own a camera other than my N5, and it can't take pictures of itself . Initial thoughts are:
Fitment- Not great. Definitely not as clean as the Otterbox Commuter or Defender on my Galaxy Nexus. I also have a gap at the top as the rubber won't completely slip into the plastic.
Feel- SLIPPERY. If there wasn't some rubber to grip on to on the sides, this thing would go flying out of my hand constantly.
Looks- Decent. It's not a bad looking case, not as bulky as an Otterbox. Doesn't add too much to the thickness of the phone, nor to the height.
Will it last?- I think this case could withstand a pretty decent fall. The rubber is fairly thick, and the plastic would probably take the brunt of the impact.
Million dollar question: Is it worth the money?- If the case fit properly, yes. I'm going to have to contact Trident to see if they can do anything about the gap at the top. If not, then no, it is not worth shelling out that money for something that won't fit the way it is supposed to. But since Otterbox has no plans for a case for our lovely phone, I don't see us having very many choices if you need a fairly rugged case. I'll keep this up to date after I get in contact with Trident and maybe try to get some pictures posted up.
I'd check to make sure all the rubber parts are popped into place. I had a gap at the top as well until I made sure all the rubber was all snug everywhere else(camera/flash, sides, etc.), then all the gaps went away and it fits perfectly. Much better than any Otterbox I've ever owned.
tyler.durden said:
I'd check to make sure all the rubber parts are popped into place. I had a gap at the top as well until I made sure all the rubber was all snug everywhere else(camera/flash, sides, etc.), then all the gaps went away and it fits perfectly. Much better than any Otterbox I've ever owned.
Click to expand...
Click to collapse
I tried fitting and refitting multiple times and can't get it to close up. I contacted Titan for an RMA so I'll just have to wait and see what happens with the new one.
t1.8matt said:
I tried fitting and refitting multiple times and can't get it to close up. I contacted Titan for an RMA so I'll just have to wait and see what happens with the new one.
Click to expand...
Click to collapse
I used to have the same problem with the case, but as the guy mentioned there is a specific way to add the hard shell. What I did was, instead of beginning with the power button side, I started with the volume buttons side. My gaps are closed, so it's not a flaw, just most of us were doing it wrong.
enriquelabrada said:
I used to have the same problem with the case, but as the guy mentioned there is a specific way to add the hard shell. What I did was, instead of beginning with the power button side, I started with the volume buttons side. My gaps are closed, so it's not a flaw, just most of us were doing it wrong.
Click to expand...
Click to collapse
Huh, that actually worked. No more gap. Guess I don't have to exchange it after all. Thanks!
I use one of the slimmest cases available, but even that makes an already bulky phone bulkier. So, a few days ago I decided to ditch the case and see how it is naked. What a difference. The outer screen is easier to use without a rim around it, and carrying it in hand and in pocket, it is noticeably smaller. In full screen mode, I think it looks nicer, too.
spotmark said:
I use one of the slimmest cases available, but even that makes an already bulky phone bulkier. So, a few days ago I decided to ditch the case and see how it is naked. What a difference. The outer screen is easier to use without a rim around it, and carrying it in hand and in pocket, it is noticeably smaller. In full screen mode, I think it looks nicer, too.
Click to expand...
Click to collapse
I'm not handy and need a case. I will defently lett the naked (and slippery phone) fall...
Also i use a S-pen wich is in my case.
When i clean my phone/case i understand what you mean but it's t dangerous for me...
I've attached a link to the case I use. It also carries my s-pen, but I find that I don't really use the S-Pen. I suppose I'll miss it, the first time I have a need for it.
https://www.amazon.com/gp/product/B0B5CZYR4F/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
If you keep in a pocket that's cotton lined you'll get lint build up. Probably something you don't want with this device. At least turn the pocket inside out when washing.
Had that problem with my Buds+ case when kept in the front cotton lined pocket. In the 60/40 cotton/polyester thigh pocket there's no build up. It's now kept in the other cargo pocket as is my N10+. No more build up. No more port cleaning.
I’m on the “no case” team. Phone is already bulky enough… I like the feel of the phone without any case. I have a S-Pen case that came with the preorder goodies, but I only bought it for the S-Pen.
I would love having my Fold naked, but I´m not that brave, so, I use a aramid/kevlar case from AliExpress that is both protective and slim at same time: https://www.aliexpress.com/item/100....order_list.order_list_main.28.5ecf1802HDCCsX
I am still using it without case and love greengray color
ITMASTER said:
I am still using it without case and love greengray color
Click to expand...
Click to collapse
Oh yes most definitely, I kinda wanted the tan one for the goldish frame but I believe this color hands down the best one
spotmark said:
I use one of the slimmest cases available, but even that makes an already bulky phone bulkier. So, a few days ago I decided to ditch the case and see how it is naked. What a difference. The outer screen is easier to use without a rim around it, and carrying it in hand and in pocket, it is noticeably smaller. In full screen mode, I think it looks nicer, too.
Click to expand...
Click to collapse
And naked I think will feel the best but I almost had a couple close calls when it was charging and when I walked by it got hooked on me, and I'm not the biggest fan of how it likes to attract the fingerprints
Naked is best but one drop can be catastrophic!
I've been using the Samsung leather case and am used to it.
I recommend a pouch type holster in any case to carry it around regardless of being in a case or not. If naked, IMHO, it's the ONLY way to go!
I got this one for my Fold 3 and it fits all the xxl sized phones too! The lining is very soft, phone stays clean and scratch and lint free and it's not so bulky and has no hard edges to dig into you when sitting down.
https://www.amazon.com/Nakedcellphone-Samsung-SM-F926-Leather-Vertical/dp/B09DKPT43J/ref=sr_1_18?crid=3PXKAK9P67POV&keywords=fold4+belt+pouch&qid=1669899781&sprefix=fold4+belt+pouch%2Caps%2C59&sr=8-18
Had my first, and only, drop of my phone those morning. No case, off our 34" vanity. It fell face first onto the hard floor. No damage. Whew!
spotmark said:
I use one of the slimmest cases available, but even that makes an already bulky phone bulkier. So, a few days ago I decided to ditch the case and see how it is naked. What a difference. The outer screen is easier to use without a rim around it, and carrying it in hand and in pocket, it is noticeably smaller. In full screen mode, I think it looks nicer, too.
Click to expand...
Click to collapse
Decided I wanted to protect the phone! However the Samsung case I paid 80 $ for sucked. Front screen was really frustrating.
Decided again after reading this thread to go caseless
And just like every other phone I have used in the last ten years, I put skateboard griptape on the back! It is a wonder of the world.
I suggest everyone try it
Now the phone is a joy!! Not pain in the ass
I also enjoy this app called swiftly switch. Gives me a navigation pill wherever I want. I one hand this thing in beast mode and like a Lil navigation pill in the top right for one hand navigation
Thank u
I recommend this https://www.amazon.de/gp/product/B0BG2723M4/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
It describes Flip 4 but i bought it for Fold 4, and it was amazing. Very thin, and the Fold looks like a new phone. the stock ases from Samsung are very heavy and not so recommended for the Front screen, but this one is so amazing
device too slippery if no case is on it...............I do like it better w/out one, but don't want the chance to damage it
best case for this phone is Samsung's with the stand at the back the big one. the phone is as thin as it can be and you get a tablet stand at the same time.
TeDeV said:
best case for this phone is Samsung's with the stand at the back the big one. the phone is as thin as it can be and you get a tablet stand at the same time.
Click to expand...
Click to collapse
Best case was last years silicone case. Kept it thing and gave the phone grip with it being silicone
I go naked sometimes after dark.. o wait
I also use my fold 4 naked.. only wah to go like a hero
I would if it wasn't for the camera bump making git a rocking boat when sitting folded on a table.
Usually I do when out though I use the official grip case
I was using a i blason clear case. But that thing attracts so much of my hand oils its a nightmare to keep clean. Just handling it for 5 minutes makes eberythng nasty. Holding this fold 4 naked in my hand is just perfection.
I may return that case. Or keep it for when going outside or work.
Unless someone knows of a better clear case.
Normally i dont care if its clear. But i waited a damn month for this burgundy color and damn strait imma show it somehow lol
ycats said:
device too slippery if no case is on it...............I do like it better w/out one, but don't want the chance to damage it
Click to expand...
Click to collapse
same here. device withouth a case is too slippery, i've read here about skateboard griptape, but not sure about this solution...so I'm using the back kevlar slim case from this pack, front naked: https://www.amazon.de/gp/product/B0BG2723M4/