Related
I received my Seidio Innocase Rugged Case and Holster for my EVO 4G. It consists of a Innocase II Surface, a soft plastic shell that wraps around the Innocase II Surface. The third and final piece is an exoskeleton that fits around the soft plastic shell. There is also a nicely built holster that has a nice locking button.
Fit- The fit is excellent, everything slips on tight but not too tight. Be careful not to pull off your screen protector when putting this case on your EVO.
Materials- The materials seem like they are tough and durable. The problem is that the soft plastic is very thin in the areas where the exoskeleton fits on it.
Durability- This solid feeling case should outlast my EVO in my opinion.
Protection- I doubt that this case provides more protection than the Active cases. I would like a thicker soft layer like the Active cases have. However, this rugged case does come with a sturdy clip and protection of ports and camera lens. The Surface case that the rugged fits around is also a plus for anyone that has need for a sleeker looking case at times.
Overall, I think I would be happier with an Otterbox type design, I think they are tougher. But the Rugged and Active are both available now. I would recommend the Innocase Active over the Rugged if you have no need for an included clip, camera lens protection and want to save some cash.
*The rugged case comes with a screen protector, which some have liked, I personally prefer something tougher.
This is my very subjective opinion, I'm sure I missed a few things. Please share your opinions as well!
firemedic1343 said:
I received my Seidio Innocase Rugged Case and Holster for my EVO 4G. It consists of a Innocase II Surface, a soft plastic shell that wraps around the Innocase II Surface. The third and final piece is an exoskeleton that fits around the soft plastic shell. There is also a nicely built holster that has a nice locking button.
Fit- The fit is excellent, everything slips on tight but not too tight. Be careful not to pull off your screen protector when putting this case on your EVO.
Materials- The materials seem like they are tough and durable. The problem is that the soft plastic is very thin in the areas where the exoskeleton fits on it.
Durability- This solid feeling case should outlast my EVO in my opinion.
Protection- I doubt that this case provides more protection than the Active cases. I would like a thicker soft layer like the Active cases have. However, this rugged case does come with a sturdy clip and protection of ports and camera lens. The Surface case that the rugged fits around is also a plus for anyone that has need for a sleeker looking case at times.
Overall, I think I would be happier with an Otterbox type design, I think they are tougher. But the Rugged and Active are both available now. I would recommend the Innocase Active over the Rugged if you have no need for an included clip, camera lens protection and want to save some cash.
*The rugged case comes with a screen protector, which some have liked, I personally prefer something tougher.
This is my very subjective opinion, I'm sure I missed a few things. Please share your opinions as well!
Click to expand...
Click to collapse
good review. I agree with you, just wish that amazon would stock the active so I could get one already!
ive got a rugged on the way for a few reasons:
-its two cases in one
-its got protection for the cam and ports
-it comes with a holser (i dont believe the active does)
dmc971989 said:
ive got a rugged on the way for a few reasons:
-its two cases in one
-its got protection for the cam and ports
-it comes with a holser (i dont believe the active does)
Click to expand...
Click to collapse
There is a set on the website that has an included holster. However, the price is $50 and it does not give you 2 cases or cam/port protection. If you need a holster the rugged is the best value right now.
firemedic1343 said:
There is a set on the website that has an included holster. However, the price is $50 and it does not give you 2 cases or cam/port protection. If you need a holster the rugged is the best value right now.
Click to expand...
Click to collapse
i got my rugged today and i must say im a fan...
its pretty much an innocase II with a soft ruber case around it and then another plastic shell to surround the soft rubber case
i would also like to mention that the holster has a locking feature, my regular innocase II holster did not have that
p.s. the port covers are very nice, but some of the covers (the head phone jack cover) worries me... i feel like its going to tear off of the case
I wish Amazon would hurry up and receive their stock.
Someone needs to put up a video & picture review of this case
redrazr7791 said:
I wish Amazon would hurry up and receive their stock.
Someone needs to put up a video & picture review of this case
Click to expand...
Click to collapse
why would anyone dislike your sig?
dmc971989 said:
i got my rugged today and i must say im a fan...
its pretty much an innocase II with a soft ruber case around it and then another plastic shell to surround the soft rubber case
i would also like to mention that the holster has a locking feature, my regular innocase II holster did not have that
p.s. the port covers are very nice, but some of the covers (the head phone jack cover) worries me... i feel like its going to tear off of the case
Click to expand...
Click to collapse
I like the idea of the locking holster, but my locking mechanism seems to unlock frequently with use.
I agree with you on the tearing issue, I'm just waiting for it to tear. The rubber is thinner than I'd like and with the amount of times you need to charge the phone, I'm anticipating a tear...
Innocase Rugged Review
I also just received my rugged case and thought I would share my thoughts on it.
As my brother often says, "It is amazing how the phone manufacturers spend so much time and effort to make the phones sleek and shiny and as soon as we get them we cover them up to protect them, hiding all the built in beauty."
The "killer" feature of this case/holster combination is the protection it offers. It doesn't make your phone look extra cool, easier to use, or anything of that sort. Other than protection you can now also carry your phone on your belt with the included holster.
You will find that after you put on the rugged case you will have to use the holster. This rugged double case makes your phone nearly twice as thick. It still fits in the pocket of my jeans, but it is very apparent that my phone is there.
I purchased the version that also includes the Innocase II Surface holster as well. In comparing the two holsters, you can quickly see that they are like night and day. The rugged holster will support belts that are almost twice as thick as the non rugged holster. The plastic on the rugged holster also looks to be slightly thicker through out. The rugged also includes a locking mechanism to prevent you from bumping into something and having your clip release your phone to the floor. I do find that the locking mechanism is a little tough to put into the lock position, but very easy to push to unlock.
The phone must have its face in on the holster. You will not be able to just clip the holster into your car and have your phone face out. It will not be usable as a poor man's car dock using just some twist ties or paper clips and an A/C vent. With the rugged part off, you can use the phone face out in the rugged holster. (I haven't tried seeing if that combination will allow access to the power ports to charge.
The screen protector went on easily and the included cloth fully cleaned all of the finger prints and grime off of my phone. It seems that the screen protector could have been slightly (very slightly) wider to fully fit the front of the phone. After putting on the Innocase II on the phone, I was unable to see the area that wasn't covered with the protector.
All of the buttons on the phone are easily hit even though they are covered with silicone. This includes the power button as well as the volume up and down buttons. You can hit them just as easily as when they were not covered.
The USB and HDMI port cover reminds me a bit about the usb port cover on my wife's Palm Pixi. You can get it off, but it would help to have longer finger nails. I was glad when my USB port cover previously broke off of my Palm Pre and made it always available.
The camera cover seems like a very nice feature. Almost no camera would exclude something to cover the lens when not in use. Yet almost no phones try to cover it up at all. Since the EVO also has the lens stick out the back of the phone this can be a real worry. I definately like the idea of having a cover, but it does have a few draw backs. First it is a pain ot open. It took me a bit to get it, but I found that the two finger solution seems to work. Use one finger to press down on the little piece of rubber and then another to pull it out. It is too bad it doesn't work much more like the kickstand where you can press on one side and it pops open. It does latch into the hard plastic exoskeleton, but it can take a bit to get it to stay. The camera cover also covers the speaker on that back, so you might need to uncover it when talking on the speaker phone. Overall I like the camera cover.
The headphone cover seems to be the easiet cover to open. It left plenty of room when open for me to put in my headset. In saying this, my headset has a vary narrow plug, so your milleage may vary.
The case does not seem to effect my signal coverage at all. I can hold my phone in the left or right hand and still get 5 bars of signal. I can also get a gps lock with this case on my phone.
I tested throwing my phone down onto hard ceramic tile in my kitchen and was unable to see any damage to my phone or the case. (just kidding)
davebu said:
why would anyone dislike your sig?
Click to expand...
Click to collapse
You'd be surprised...
i would also like to add that the evo in just the Innocase II will fit in the holster "face out"... and lock in just fine
soooo:
full rugged case - holster works with screen facing in
just innocase II - holster works with screen facing out
Went out with my friends yesterday, showed one of them the rugged case, he looked at it and goes: "throw it" I was confident in the case but not the screen, so i decided to drop it on its back from about 4 ft in the air. Hit the dirt parking lot, everyone that wasn't paying attention to the conversation gasped as they thought i had accidently dropped my shiny new toy.
I picked it up, inspected it, there weren't even any marks on the exoskeleton part. Dusted off the silicone and snapped it back in my holster, everything was fine.
Overall, fairly impressed by the protection it affords.
lacrossev said:
Went out with my friends yesterday, showed one of them the rugged case, he looked at it and goes: "throw it" I was confident in the case but not the screen, so i decided to drop it on its back from about 4 ft in the air. Hit the dirt parking lot, everyone that wasn't paying attention to the conversation gasped as they thought i had accidently dropped my shiny new toy.
I picked it up, inspected it, there weren't even any marks on the exoskeleton part. Dusted off the silicone and snapped it back in my holster, everything was fine.
Overall, fairly impressed by the protection it affords.
Click to expand...
Click to collapse
Next time man up and throw it.
According to Seidio's online store their Innocase is now shipping. Innocase is well reviewed for other phones. Anyone have comments on their new Droid 2 version?
Otterbox is coming out with one soon, its posted on the website. I'm excited for that. I honestly prefer Otterbox over Innocase.
kwheel596 said:
Otterbox is coming out with one soon, its posted on the website. I'm excited for that. I honestly prefer Otterbox over Innocase.
Click to expand...
Click to collapse
Was gonna buy the seidio, till I saw the otterbox case... now I don't know which to get
Innocase on the way
The Otterbox case seems similar to Innocase i.e. polycarbonate shell with a thin rubber-like coating to aid gripping. I already have a screen protector in place (and a spare) so I didn't need it (included with Otterbox).
Other cases I read about had issues with the slide keyboard. Either the case interfered with sliding or it was thick enough to block some of the top row of keys.
I went ahead and ordered the Innocase combo..... Innocase plus belt holster. Should arrive in a few days. I will post my impressions of the case.
oldcyberdude said:
The Otterbox case seems similar to Innocase i.e. polycarbonate shell with a thin rubber-like coating to aid gripping. I already have a screen protector in place (and a spare) so I didn't need it (included with Otterbox).
Other cases I read about had issues with the slide keyboard. Either the case interfered with sliding or it was thick enough to block some of the top row of keys.
I went ahead and ordered the Innocase combo..... Innocase plus belt holster. Should arrive in a few days. I will post my impressions of the case.
Click to expand...
Click to collapse
yeah, I tried one of the verizon OEM cases, and it definitly hindered the opening of the keyboard, and the top row. Enough so that I have serious doubts about whether any case will not have this problem.
Also I've had the misfortune to already drop my phone (albeit short drop), and whatever the material that surrounds the screen is EXTREMELY brittle, and shattered off a fair number of chunks.
That being said, I think I'll probably just wait on a case until perhaps my phone starts "having lots of problems" a week or so before the warranty is up and I have to get a replacement one.
oldcyberdude said:
The Otterbox case seems similar to Innocase i.e. polycarbonate shell with a thin rubber-like coating to aid gripping. I already have a screen protector in place (and a spare) so I didn't need it (included with Otterbox).
Other cases I read about had issues with the slide keyboard. Either the case interfered with sliding or it was thick enough to block some of the top row of keys.
I went ahead and ordered the Innocase combo..... Innocase plus belt holster. Should arrive in a few days. I will post my impressions of the case.
Click to expand...
Click to collapse
Let us know if it fits the OEM multimedia cradle please (if you have one).. I'm dying for a good case that fits the cradle and doesn't hinder the keyboard like most of the hard shell ones i've tried (including the VZW and some cheapo ebay one)....
Lithoss said:
Let us know if it fits the OEM multimedia cradle please (if you have one).. I'm dying for a good case that fits the cradle and doesn't hinder the keyboard like most of the hard shell ones i've tried (including the VZW and some cheapo ebay one)....
Click to expand...
Click to collapse
It does not fit the cradle--between me and my 2 coworkers we have been thou 6 or so different cases and this is def the best one so far. No interference with the keyboard slide either, if the case was any thinner it would fall apart.
Nightrage said:
It does not fit the cradle--between me and my 2 coworkers we have been thou 6 or so different cases and this is def the best one so far. No interference with the keyboard slide either, if the case was any thinner it would fall apart.
Click to expand...
Click to collapse
Hmmm. That stinks it doesnt fit. Sounds like a very good case though.
I may have to take my dremel to the cradle
Assessment of the Seidio Innocase
I bought my Innocase via Seidio on-line store. The process was easy and shipped the same day via FedEx. I purchased the combo of the case and holster. However, Henry Ford must have been the design consultant for the D2 case. Unlike cases for the iPhone, you can have any color as long as it’s black. My wife reports that this is so BORING!
The case is made of a polycarbonate that is coated with a thin non-slip rubber-like material to improve gripping the phone. The case is only about 1/16 inch thick. The Innocase comes in 2 pieces that attach to the lower (sliding) and upper (display) portions of the phone with very small tabs that grip the edges. Though very small, these tabs secure the case well. Installation is a snap . I can report that the Innocase does not interfere with sliding mechanism in any way. Cutouts are provided for all phone items such as power connector, headphone jack, microphone, speaker, volume control, camera, power switch etc. The case does remove easily for access to the battery/ microSd.
Regarding operation of the slide out keyboard; I have found no difficulties. The D2 (without case) has less than 1/8 inch space above the top row of keys. The Innocase uses a minimum amount of this space. I found that even with my fat thumbs I had no difficulty (i.e. no missed or erroneous key presses) using the upper row of keys. In fact if I slipped my thumb up against the edge of the case I was positioned right over the top row keys.
Seidio has 2 holsters available; non-cased devices and Innocase devices. I have the Innocase holster. The holster is well built and provides a secure belt attachment. The belt clip swivels allowing vertical, 45-degree or horizontal carrying of the phone. To secure the phone you slip it in on the bottom and snap the clip on the top. The top clip is offset so it does not interfere with headset & power switch if you clip in with the screen facing in. The inward facing screen is recommended to reduce screen scratch risks. The holster is felt lined to protect the screen.
In summary I am very happy with the Innocase and belt holster. They are well designed and constructed. I recommend them for anyone with a Droid 2.
I do not own a cradle. I notice Seidio has a cradle for the Droid that works with Innocase. I would call them and see if the same cradle will work with the D2 & Innocase.
Thanks for the reviews. Sounds like the best case out there for sure.
Would you mind posting some pictures when you get a chance please? The pics on the seidio site are pretty weak. thanks!
Case and holster photos
Not much to look at
Case back shows cutouts for camera, speaker and USB power. Dull black exterior finish. Case front (not shown) is even less to look at, just a big cut for the screen.
Case tab picture shows a close up of the small tab that clicks onto the phone to secure the case. 4 places on both back and front halves. The shining finish evident in this photo is the interior of the case.
Holster picture shows the support for the bottom of the phone (on left of photo). The clip on the right secures the top of the phone and allows easy removal. On the bottom of the photo is the belt clip.
Hope these help.
I bought the Seidio surface case after finding the el-cheapo snap-on case I bought from an Amazon marketplace seller to be too bulky. The Seidio is no less bulky and was not even as well designed as the cheapo one (which afforded better access to the bottom row of soft buttons). I returned it to Seidio (out my $5 shipping, which was more than the entire cost of the cheapo one), and think it's unconscionable that they charge $30 for these two bits of plastic.
BTW, I have since tried one of the soft gel style cases for the A955 that they sell on ebay -- the kind with the "track slider" that keeps the two gell halves together (sort of like a ziplock plactic channel). This contraption was a completely useless mess, which fortunately only set me back $3 including shipping.
Ultimately, I think the D2 is a relatively thick device that really cannot accomodate a case without becoming way too thick. Thankfully, I've come to realize that it doesn't need a case - it already has Gorilla class and a rubberized back. Why bother with more? Mine's been dropped a few times with no signs of the drop at all except to the chrome paint around the edges, which flakes off easily.
Do you have a pic with it on the phone?
What's the best rugged case for my evo out there as far as all year round construction work.
I got the seidio extended rugged case. It is a beast. So solid
I wasn't the biggest fan of the outbox defender.
I think there are other cases too, like Cyclops and trident. I also remember something about kraken.
I just bought a couple cases to figure out which one was best for me.
~ I'm a fungi
Otterbox case. I think it's ugly and bulky but it protects the phone (so I've been told).
I work construction/warehouse now, and I have the otterbox. It has been ripped off my belt, so I called, told them needed new belt case, they replaced it with three, so big plus for them. Also have dropped the phone about 16ft on to concrete floor with otterbox, no problem, picked it up hit power button and screen came on (was in sleep) so I hooray for them standing behind their product. Downside is it is big, but fits in tool pouch nicely on my top pocket, and it protects the camera with small plastic screen.
Otterbox, it's huge, but so is the phone. You could probably bring that thing into armed combat. It's like a mini-tank in my pocket
Otterbox has great customer service. It is seriously amazing. That's one more reason to love them
~ I'm a fungi
Yup had otterbox since day one. I know someone that bought a cheap silicone cover; she dropped her evo and screen is now shattered. Thumbs up for otterbox.
i like the otterbox
Trident Kraken
I have the Trident Kraken. Rugged (yes, it's bulky), built-in screen protector, great fitment (2 layers= hard shell inner & silicone outer), makes use of the phone's built-in kickstand (rather than building one into the case itself), ports are covered, appropriate & mostly non-interfering cut-outs (camera, flash, speaker, mic...I've noticed a slight difference in speaker phone usage), cost is in line with other cases of this type.
IMO, an excellent case.
Otterbox defender by far. I've had otterboxes for the past few phones with no complaints. I've never had a problem with them warranting them out for defects either.
I have the Seidio rugged, and it's a great case. 3 layers (slim case, silicone cover and then plastic shell) and the silicone layer has covers for the ports and a cover for the camera lense. (I use my camera a lot so I cut the camera lense cover off) and the holster has a lock to hold it in place well.
I switched from construction to tech work, so now it sits in a drawer, but it was great when I needed it.
tltb26 said:
I have the Trident Kraken. Rugged (yes, it's bulky), built-in screen protector, great fitment (2 layers= hard shell inner & silicone outer), makes use of the phone's built-in kickstand (rather than building one into the case itself), ports are covered, appropriate & mostly non-interfering cut-outs (camera, flash, speaker, mic...I've noticed a slight difference in speaker phone usage), cost is in line with other cases of this type.
IMO, an excellent case.
Click to expand...
Click to collapse
I had this same case. Worked wonderfully to protect. My pictures had a blue hue added to them until i popped out the little camera lens protector screen.
Otterbox
Have to agree with the rest Otterbox is the best and they stand behind them with no problems you call them tell them whats wrong and they send you a new one.
I have a 2nd gen ballistic HC for my evo, and i've dropped that thing more times than i care to remember, concrete, tile, dirt, snow, pretty much everywhere except solid ice,and it has held up very well. It has the hard plastic with soft bumpers, as well as the add-on silicone layer that the seidio rugged,which i also own. The size of the thing is enormous though, and i have smacked my friend in the head once while tossing him the phone from a few feet away, he said it hit him pretty hard
I also have the Trident Kraken. Its an amazing case and also comes on just about every color
Sent from my EVO 4G using XDA
lacrossev said:
I have a 2nd gen ballistic HC for my evo, and i've dropped that thing more times than i care to remember, concrete, tile, dirt, snow, pretty much everywhere except solid ice,and it has held up very well. It has the hard plastic with soft bumpers, as well as the add-on silicone layer that the seidio rugged,which i also own. The size of the thing is enormous though, and i have smacked my friend in the head once while tossing him the phone from a few feet away, he said it hit him pretty hard
Click to expand...
Click to collapse
I have the ballistic as well. I dropped it from 23ft off a ladder, picked it up and continued my text message I've dropped this poor thing so many times and have purposely thrown in across the room just to show people the case and she's held up without me ever needing a replacement. Built in screen protector that I had to cut out cuz it was so beat up but it also came with a nicely cut single sheet protector as well. The rubber outer casing is nice too if you can handle the extra bulk and/or need the extra traction for your hands.
Everyone is always talking about the otterbox, guess it wins the popularity vote.
However, I've seen quite a few people complain or have issues with them, like the clip failing them or whatnot.
Personally I would the Ballistic HC case. I bought one for 20 USD on clearance @ mobile city. I think it's out of stock but if you do a google shop search, some vendors will have some. The MSRP is 40 USD I believe, but it's well worth it.
The only problem I have with it is the screen cover gets scratched up a bit (not the Evo screen, just the cover screen), try buying one of those plastic stick ons and it'll be fine. The other 2 minor issues are that it can get a bit dirty so try cleaning about once a week; the other issue is that the cover can be a pain to take off, I pull mine from the bottom opening onto the sides until it's off. Other than that, it's excellent and offers maximum protection like no other.
EDIT: I just saw posters above me recommended Ballistic.
On a side note though, I'd like to add that the case in black gives it this awesome military look. If you theme your phone just right with cool widgets, etc, it looks even more amazing. You just can't go wrong with this case. +the clip never lets go of the phone while at work.
I used the Otterbox Defender series case for over a year, great case. I wanted an extended battery but never pulled the trigger because you couldn't use in a rugged case. For the last six months I've been using the Trident Electra series that comes with an extended 2800ma battery. The case is very rugged and protects the phone. It does have a screen protector built in but you can remove with a hairdryer. The extended battery adds bulk but is still thinner than the otterbox. The battery life is awesome.
Sent from my PC36100 using XDA
DCWS6 said:
I used the Otterbox Defender series case for over a year, great case. I wanted an extended battery but never pulled the trigger because you couldn't use in a rugged case. For the last six months I've been using the Trident Electra series that comes with an extended 2800ma battery. The case is very rugged and protects the phone. It does have a screen protector built in but you can remove with a hairdryer. The extended battery adds bulk but is still thinner than the otterbox. The battery life is awesome.
Sent from my PC36100 using XDA
Click to expand...
Click to collapse
Ever thought of using a slim extended battery? Same size as stock, and you van still rock the defender case!:thumbup:
Sent from my PC36100 using xda premium
The Ballistic HC or Kraken seemed to work the best for the Evo.. Kraken case also has a holster too.
So I've had my Verizon GNex from day one launch and I love the phone, however I do not love the slippery plastic body. I knew that after the first day of almost dropping it I would need a case. Since protection was a priority I choose to go with the Otterbox Defender. A great case for protection, but it has its flaws. I found that after taking the case on and off to switch batteries out, that over time the plastic clips that keep the inner tpu case snapped together have slowly started to break. Problem number two I have is that the screen protector creates a hazy rainbow when it gets any kind of snudges on it. I don't know about the rest of you but the beautiful screen on this phone is one of its main selling points for me. So as an alternative I have been using one of the androidify cases, which is nice looking but offers no where near the protection the Otterbox does, as well as the fact that while its a rubber case, it is also very slick to hold. After mulling over some of the posts here and on the web, I have narrowed down my list of potential future case to the Otterbox Commuter, or the Seidio Active. One of the things I really love about the otterbox is the way they raise the vol and pwr buttons, however the tpu outer shell of the commuter concerns me as far as being as slick as the others. So what I am looking for and this is where all of you can help is what case to match my requirements to. I need it to be a sturdy case, size is not an issue, however I don't want to double the size of the phone either. I do not need a screen protector, so if it comes with one it will not be used. I would like the raised buttons, however its not a must. Covering the ports is also important but not a must either. So that is my list, if any of you have good or bad experiences with these particular cases or have a suggestions for a case that fits my needs please share. THank you for your time.
Hey XDA,
I recently ordered this case to replace my Ringke Fusion (which I both like and hate) and hopefully I will like it enough to keep it as my long term case. I haven't noticed much as far as reviews for this particular case so I was thinking of doing one for it. I have a new qi charger coming with it so I should be able to test that and see if it adversely affects the glass screen protector I have on right now. If anyone out there is interested in pictures of the case on the phone or anything like that, let me know and I'll do my best to include them when I review it on Thursday, I'm a little bit of a case junkie and typically try out several for my phones during their life time, but this is the first higher end case I'll have for the N5 and I'm really excited to see how it turns out.
Seidio Product Page
moonDOOM
Probably no real reviews of this case because they're already well-known. Others have already posted, and I'll back it up, Qi wireless charging works perfectly with it. Simply the best cases you can buy. Also, the holsters are pretty fantastic.
I got the case in today and as apparently everyone knows already, this case is quality made. I previously had a Ringke fusion case on my N5 and liked being able to see the nexus logo, but hated the tpu layer and how the back collected dust every time it was put into a pocket. I decided to go with a more traditional 2 layer case and I thought that the Seidio Dilex looked the best out of the ones currently available.
Pros:
- After seeing the product in person, I'm immediately sold on this design. The case is much darker black than it appears on the website (bright lighting in their product photos) and the rubberized coating on the PC layer is the classic silky smooth texture that Seidio is known for and has used for years. On a side note, the other colors are actually really nice looking too if you prefer something other than black and it looks like they have the same texture coating. The case feels really good in hand because of the soft texture and the silicone actually feels really similar.
- The kickstand also adds just a little weight to the bottom of the phone and makes it somewhat easier to balance, hold and manipulate with one hand. Speaking of the kickstand, it's actually aluminum instead of plastic which is a nice touch. The best part is that the kickstand is spring loaded (slightly) to the outward position but also contains a magnet to hold it securely in place when not in use. It appears to be pretty well attached to the case so hopefully it will hold up over time.
- The ports are all pretty well lined up with the cutouts and they seem big enough to accommodate most cables.
- Qi charging works just fine, at least on the cheap chinese one I also got in today. NFC doesn't appear to be affected either, although I only tried once.
- I'm currently using a Nillkin glass screen protector and it appears that the silicone is soft enough not to interfere with the edges of the screen protector. May not be the same with other brands.
Cons:
- The only thing I can think of is that because the outer layer only presses the edges in the middle and corners, the silicone seems to be a little loose or saggy inbetween the "arms" of the outer shell. I'm hoping that settles into place over time but if it catches on my pockets too much, it might actually get worse.
- The sticky texture is great for grip, but also picks up a lot of dust, but that's not news to anyone who has used a silicone case before.
In conclusion, I'd probably give this case 4.7 out of 5 stars. I like just about everything about it but I wish the silicone they used was just a little less pliable.
Pictures of the Case
Sorry, I know the pictures are garbage (I had to take them with my old phone so the N5 could be in the case) but I'd be happy to answer any questions y'all might have.
moonDOOM
Looks real nice little too thick for my taste though.
Sent from my Nexus 5 using Tapatalk
This looks almost exactly like the generic thick kickstand cases that are being sold under various brands at various prices.
Dilex Case and Qi
Good morning. I wanted to follow up on your case experience with Qi charging I put this case on a Samsung Galaxy S5 and used a powerbot circular charging pad. I found that to get the charger aligned, I needed to prop the device up on the kickstand so it was a little firther from the pad, and I could not get a charging lock.
I'm trying to figure out if that is a function of the powerbot's charging signal or the anatomy of my Qi pad. Does your phone sit square on the charging pad? or is it propped up on the kickstand?
Thanks,
Marcva