[Q] Chase Mobile / Chase Quick Deposit Issue - T-Mobile Samsung Galaxy S 4

Hi everyone,
I don't see this issue posted regarding this jfltetmo unit, but I'm having an issue with Quick Deposit. I've had this issue since I upgraded to the S4 in mid-May 2013. Can you help me to make this a known issue with Chase? I assumed that someone else had already reported it, but sadly that seems to not have been the case. I took to Twitter this morning and seemed to receive a positive response.
Here's the deal: When I photograph the check it appends this gray line noise at the bottom of the photo. Please see the screen shots (also in the Twitter status) to view the screen shots I took of the issue I'm encountering.
So I ask you, if you're having this issue can you call and/or Tweet @ChaseSupport and start cases?

packetdog said:
Hi everyone,
I don't see this issue posted regarding this jfltetmo unit, but I'm having an issue with Quick Deposit. I've had this issue since I upgraded to the S4 in mid-May 2013. Can you help me to make this a known issue with Chase? I assumed that someone else had already reported it, but sadly that seems to not have been the case. I took to Twitter this morning and seemed to receive a positive response.
Here's the deal: When I photograph the check it appends this gray line noise at the bottom of the photo. Please see the screen shots (also in the Twitter status) to view the screen shots I took of the issue I'm encountering.
So I ask you, if you're having this issue can you call and/or Tweet @ChaseSupport and start cases?
Click to expand...
Click to collapse
All I do when that happens is turn the phone the other way. Sometimes it logs me off but keep trying it.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4 Beta

I too am having this same issue with my T-Mo SGS4. I was going to try and update the camera and see if that helped any (Just haven't had the chance yet).

SpaceRanger69 said:
I too am having this same issue with my T-Mo SGS4. I was going to try and update the camera and see if that helped any (Just haven't had the chance yet).
Click to expand...
Click to collapse
I was hoping the Cyanogen Camera in the new releases would fix it, but I wanted to wait to flash away from stock until we get closer to a release candidate, etc.. until then I'll probably hang out on stock rooted.
However, the point of my post was to ask you to report it to Chase. Apparently not everyone is having the issue, or not everyone is reporting it. Please see the links in the OP for the applicable information.

Related

Trouble with XDA servers on May 21-22, Lost my PMs!!!

Hi,
I've been having issues connecting to XDA for sometime. Also, using a website online, I figured out that it is a problem for everyone.
Secondly, I lost some of the PMs I wrote over the last couple hours!!!
Any help?
EDIT: Seems like those PMs trickled back slowly. I am having random issues today. For instance, I just can't seem to quote any post.
We had a hard DB crash which required fix of some tables, you should see those messages come back in.
bitpushr said:
We had a hard DB crash which required fix of some tables, you should see those messages come back in.
Click to expand...
Click to collapse
Well, geez.. That's bad! Glad to see things getting fixed!
Thanks for the response...

[Q] text messages send fail after OTA

***If your having similar issues, please call sprint to make them aware of the issue.****
Anyways, can any one help me. I updated to jelly bean OTA, and since then my LGOG does not like to send text messages out. My phone will not send messages shorter than 10-20 characters. Im in the CHICAGO area. No problem receiving them, just more often then not i get a failed sent. I have tried resetting the phone hard/soft. I took my phone into sprint and they said I need a new phone. Wtf! Anyone have this issue, or have any ideas to resolve this?
Im pretty disapointed right now, the phone was flawless before the update! Never had a single problem before. Thanks in advance.
UPDATE.. In conclusion,if anyone is interested, I believe the new jellybean update just doesn't play well with my towers in my area of Chicago. With the jelly bean update my voice signal was excellent, but the data signal was degraded. I always noticed, with ics while 4glte was connected, the voice signal was less. With jelly bean it seemed to be just the opposite at all times, great voice so so data connection. Only if i could have both and jellybean wtf?? Maybe someone could help me on here and explain a radio/jelly combo i would have best of both worlds.
Seems to be a Chicago issue.
**Either way I aquired LGNPST and original TOT file and reflashed the phone with original software and have not accepted the jellybean update for now.**
If you would like me to host the files needed PM me, I'll send you links.
I suposed I could have tried to reflash ZV9/ICS or ZV9 radios, but I bricked the phone before trying that.
I must have got the best phone out there. I've never had a problem with any software version we've had.
***If you have this issue please call sprint, so they are aware of issue****
cremator75 said:
I must have got the best phone out there. I've never had a problem with any software version we've had.
Click to expand...
Click to collapse
Rub it in why dont ya.... Well mine was the best android phone that i have owned. I never had a single issue before this.
I guess since i havent got any responses no one else has this issue. Is there anyway to reflash jellybean on my phone again?
Have you tried a ##72786# in the dialer? It will reprogram the phone. It won't erase anything.
Sent from my LG-LS970 using xda premium
I've been having the same problem
Sent from my LG-LS970 using xda app-developers app
_Epic said:
Have you tried a ##72786# in the dialer? It will reprogram the phone. It won't erase anything.
Sent from my LG-LS970 using xda premium
Click to expand...
Click to collapse
I have not tried the ## but ill give it a shot. Sprint may have done that.
More on this issue, it seems just not to send short messages. Like lol, no, yes anything shorter than a sentence. I have noticed tht long texts send fine, and picture text seem lightning fast. Whch is great, but cant respond to someone with a simple yes or no. Wtf
I have also noticed a bigger delay between automatic switching between 3g and 4g. Before the update the switching was seamless.
I have also rooted and reflased the ota, same issue. I did not flash the radios seperate tho.
The ## did not fix my text issue. Sprint store did do this as well.
Still have this same issue anyone figure anything out? Anyone have anymore suggestions i can try? Sprint does something on their end, and restore the phone with ## and it works for an hour, then back to the same issue.
Peteyo, are you in Chicago? Maybe it's it's a network issue. I'm having the same problem and so is my buddy. I can't believe more people aren't coming forward with this if it's a national thing.
But let me know if you find a fix, and I'll do the same. And you're right, it only happens on short messages!
Im in Chicago and having the same issues, even with other messenger apps that use stock mms, I also use whats app and have no issues. They seem to be random some send and some don't. If there is a fix please post it is a pain .
Sent from my LG-LS970 using XDA Premium HD app
***If you have this issue please call sprint, so they are aware of issue****
I have chalked it up to LG sucking! or I supose it could be sprint. The JB update they pushed changes the way the phone communicates with the towers. I grabbed bits and pieces from other threads with data problems and came to that conclusion. It doesn't appear to make issues with everyone, or have the same problems.
What i did, and what maybe the easiest is to reflash the phone back to its original form out of the box. Also im not accepting the ZVB/jelly bean update that messed up our phones. To return to original state, u must aquire LGSNPT, and Sprint`s original tot file. You can find these two in the developer sections. Its really easy and painless and get you right back where u need to be. The toughest part is putting your phone into download mode. vol+ vol- and power buttons.
Make sure u back up your pictures/things you may want to keep.
Option 2 you can **** around and try to find an ICS file, root your phone, and flash it back to ics. Or better yet root and flash ZV9 radios.
However im not sure if these will work. I have not been able to find ZV9 radios.
Option 3 if you have insurance get a new reman phone, or if no insurance pay sprint 50bucks for a reman phone. But you will still have the same issue if you update to ZVB/jellybean.
I wish I new more about this stuff and make a custom radio that has the voice improvements from ZVB/Jellybean, and the data from ICS/ZV9. Probably not even possible.
vetta 360 said:
Im in Chicago and having the same issues, even with other messenger apps that use stock mms, I also use whats app and have no issues. They seem to be random some send and some don't. If there is a fix please post it is a pain .
Sent from my LG-LS970 using XDA Premium HD app
Click to expand...
Click to collapse
I'm in the Chicago area and noticed the same thing...
The strange part of all of this is that my text messages will always send if they are greater than about 10 to 20 characters. Anything smaller than that amount will give me a send failure. Has anyone else had that experience?
Data and Cell Reception have been stellar for myself since the update -- I believe I was having the texting issues before OTA (though I wasn't rooted at that point)
***If you have this issue please call sprint, so they are aware of issue****
That was my exact issue! I had to send complete sentences. WTF
BBetz said:
I'm in the Chicago area and noticed the same thing...
The strange part of all of this is that my text messages will always send if they are greater than about 10 to 20 characters. Anything smaller than that amount will give me a send failure. Has anyone else had that experience?
Data and Cell Reception have been stellar for myself since the update -- I believe I was having the texting issues before OTA (though I wasn't rooted at that point)
Click to expand...
Click to collapse
peteyo said:
That was my exact issue! I had to send complete sentences. WTF
Click to expand...
Click to collapse
Don't you feel a greater level of sophistication when you have to type an entire sentence?
I'm sure it's Sprint trying to cut down on their SMS costs, but I'm not a conspiracy theorist.
Funny! I guess I should have just added a bunch of quick messages that are complete sentences for a yes or no answers. And the lesser 4g reception does slow down my midget porn downloading. Maybe it really is a win win...
BBetz said:
Don't you feel a greater level of sophistication when you have to type an entire sentence?
I'm sure it's Sprint trying to cut down on their SMS costs, but I'm not a conspiracy theorist.
Click to expand...
Click to collapse
Yeah I have the same problem on my Lg Optimus. In Chicago Area on sprint too. My one friend has verizon and has a cheeper lg smart phone and has the same problem. I think it is something with LG. I should have bought the Galaxy.
peteyo said:
***If your having similar issues, please call sprint to make them aware of the issue.****
Anyways, can any one help me. I updated to jelly bean OTA, and since then my LGOG does not like to send text messages out. My phone will not send messages shorter than 10-20 characters. Im in the CHICAGO area. No problem receiving them, just more often then not i get a failed sent. I have tried resetting the phone hard/soft. I took my phone into sprint and they said I need a new phone. Wtf! Anyone have this issue, or have any ideas to resolve this?
Im pretty disapointed right now, the phone was flawless before the update! Never had a single problem before. Thanks in advance.
UPDATE.. In conclusion,if anyone is interested, I believe the new jellybean update just doesn't play well with my towers in my area of Chicago. With the jelly bean update my voice signal was excellent, but the data signal was degraded. I always noticed, with ics while 4glte was connected, the voice signal was less. With jelly bean it seemed to be just the opposite at all times, great voice so so data connection. Only if i could have both and jellybean wtf?? Maybe someone could help me on here and explain a radio/jelly combo i would have best of both worlds.
Seems to be a Chicago issue.
**Either way I aquired LGNPST and original TOT file and reflashed the phone with original software and have not accepted the jellybean update for now.**
If you would like me to host the files needed PM me, I'll send you links.
I suposed I could have tried to reflash ZV9/ICS or ZV9 radios, but I bricked the phone before trying that.
Click to expand...
Click to collapse
Searching this one word text problem for a friend. Has this been resolved yet and can anyone point me in the right direction. Thanks
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
jondroid2 said:
Searching this one word text problem for a friend. Has this been resolved yet and can anyone point me in the right direction. Thanks
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
It has not been fixed yet, and I'm starting to believe it may never unless people start complaining more. I strongly encourage people to call sprint support often regarding this, if you would like to see it fixed. I have opened a couple cases with Sprint business support (corporate account here). If more people raise a stink, they have to do something!
Will do. Thanks for the quick reply:thumbup:
Btw.... You guys have one beast of a phone! Congrats:beer::thumbup:
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

[ROM] [LS970] [4.3] [cfX-Toolchain 4.8.y+] codefireXperiment Nightlies [OFFICIAL]

Hey everyone, got another official rom for you guys.
I've been building for a few weeks now, all running pretty smoothly on the AT&T variant. Hit me up if you guys find any issues with the Sprint build. I don't have one myself, so I am unable to test.Official CM based, so e975 kernel.
Check it out here: http://codefirex.com/index.php?p=/discussion/258/rom-ls970-4-3-cfx-toolchain-4-8-y-codefirexperiment-nightlies
The good news: Data and GPS seem to work right off the bat, across reboots.
The bad news: It seems that I can't send texts. Also, the signal icon in the statusbar never shows any bars (though it does show the 3G icon). It appears as if I have a dead signal 100% of the time, even though I'm able to browse the internet (albeit very slowly) and make calls.
Thanks for your work!
Sent from my LG-LS970 using xda app-developers app
I got an MMS but no SMS would go through.
But I love AOSP mode
Sent from my LG-LS970 using xda app-developers app
YES!!! MORE OFFICIAL ROMS
Sent from my LG-LS970 using Tapatalk now Free
Link is down.
EDIT
Must have been the site, it's back up now.
prowlingfox said:
The good news: Data and GPS seem to work right off the bat, across reboots.
The bad news: It seems that I can't send texts. Also, the signal icon in the statusbar never shows any bars (though it does show the 3G icon). It appears as if I have a dead signal 100% of the time, even though I'm able to browse the internet (albeit very slowly) and make calls.
Click to expand...
Click to collapse
I have weird connection problems with this ROM as well. It always boots up with the wrong phone number so I can't use any cell radio related functions. I sent some logs to Synergye but not sure if they helped.
Sent from my LG-LS970 using XDA Premium 4 mobile app
I'll take a look at the issue this week / weekend. It's probably some stupid mistake, and I should have it fixed soon, I am just not familiar with CDMA at all yet, and don't have a device to test with myself.
SnowLeopardJB said:
I'll take a look at the issue this week / weekend. It's probably some stupid mistake, and I should have it fixed soon, I am just not familiar with CDMA at all yet, and don't have a device to test with myself.
Click to expand...
Click to collapse
Out of curiosity, I just compared sources between CM and cfXe and not really sure what I was looking for, I removed one line from the cfXe sources, built it, and boom, everything is now working:
device/lge/ls970-common/ls970-common.mk
remove line 187, ro.telephony.ril_class=LgeLteRIL \
I'm not entirely sure of the consequences, but I was getting 3G and 4G, and SMS and MMS were sending both over 3G and Wifi. Also, I noticed a dead touch area on the screen, not sure if it is my device only, but the easiest way to get there is to go to settings, and then try to click on bluetooth.
edit: looks like I have a busted digitizer
Anyone mind testing out this build? It looks like it is not quite there from my side, but I figured I may as well have someone test it out to be sure. The issue is that it is using the GSM ril instead of the ls970 specific CDMA ril. If this does not work, I should be able to get another one out real soon that does fix the issue.
http://http://downloads.codefi.re/snowleopardjb/CFXE-ls970/testbuilds/full_ls970-cfxe-OPENMASTER-20131017.123401.zip
SnowLeopardJB said:
Anyone mind testing out this build? It looks like it is not quite there from my side, but I figured I may as well have someone test it out to be sure. The issue is that it is using the GSM ril instead of the ls970 specific CDMA ril. If this does not work, I should be able to get another one out real soon that does fix the issue.
http://http://downloads.codefi.re/snowleopardjb/CFXE-ls970/testbuilds/full_ls970-cfxe-OPENMASTER-20131017.123401.zip
Click to expand...
Click to collapse
Eh, I'll do it. I got nothing better to do. Brb.
EDIT: the link is messed up, as you wrote it....there's an extra http://. Just thought I'd let you know. But i'm downloading now.
EDIT2: god f****** damn the new TWRP, giving me the option to wipe internal storage.... I knew this would happen eventually. Ughhhhhhh.
---------- Post added at 03:28 PM ---------- Previous post was at 02:49 PM ----------
First things first. Upon initial setup, the first thing that it asks you to do is to insert the device's SIM card. Obviously that doesn't apply to us CDMA folks. It allows you to skip this step, so I did. after a few seconds the phone connected to sprint and 3G data appears to be working. Signal bars are working. I was able to sign in to my google account. I haven't rebooted because I can't test much right now, but the basics seem to be working on initial boot. Can't test GPS right now. Also can't test SMS right now, apologies.
SnowLeopardJB said:
Anyone mind testing out this build? It looks like it is not quite there from my side, but I figured I may as well have someone test it out to be sure. The issue is that it is using the GSM ril instead of the ls970 specific CDMA ril. If this does not work, I should be able to get another one out real soon that does fix the issue.
http://http://downloads.codefi.re/s...ull_ls970-cfxe-OPENMASTER-20131017.123401.zip
Click to expand...
Click to collapse
Testing this build out myself since I also have nothing to do. So far, everything is extremely fast, fluid, and stable! Have working data and everything (But then again, I'm one of the few lucky ones who never had any problems with data ). Gonna test out MMS soon. Only real problem I have with 4.3 AOSP ROMs really is the SMS issue where texts don't send over 160 characters. But I flashed the 4.2.2 messaging apparently, which usually fixes that. So far so good, though! I'm really digging it.
Sent from my Amazon Kindle Fire2 using xda app-developers app
From what I can tell, that "fixed" data, but is still not quite correct. It is most likely just using a generic ril, and not the CDMA RIL that it is supposed to. I am going to do another test build real quick here, then hopefully push the fix before the next nightlies run.
EDIT:
Can someone test out this real quick? I am almost positive this should fix the issue, but I just want to be sure before I push.
http://downloads.codefi.re/snowleopardjb/CFXE-ls970/testbuilds/full_ls970-cfxe-OPENMASTER-20131017.155310.zip
Thanks for your work!
Sent from my LG-LS970 using xda app-developers app
SnowLeopardJB said:
From what I can tell, that "fixed" data, but is still not quite correct. It is most likely just using a generic ril, and not the CDMA RIL that it is supposed to. I am going to do another test build real quick here, then hopefully push the fix before the next nightlies run.
EDIT:
Can someone test out this real quick? I am almost positive this should fix the issue, but I just want to be sure before I push.
http://downloads.codefi.re/snowleop...ull_ls970-cfxe-OPENMASTER-20131017.155310.zip
Click to expand...
Click to collapse
For me, phone kept force closing upon reboot wouldn't even let me continue with the setup process :/
Sent from my LG-LS970 using xda app-developers app
SnowLeopardJB said:
From what I can tell, that "fixed" data, but is still not quite correct. It is most likely just using a generic ril, and not the CDMA RIL that it is supposed to. I am going to do another test build real quick here, then hopefully push the fix before the next nightlies run.
EDIT:
Can someone test out this real quick? I am almost positive this should fix the issue, but I just want to be sure before I push.
http://downloads.codefi.re/snowleopardjb/CFXE-ls970/testbuilds/full_ls970-cfxe-OPENMASTER-20131017.155310.zip
Click to expand...
Click to collapse
Keep getting telephony force close immediately upon booting. I think it was this commit that broke it:
https://github.com/codefireXperimen...mmit/f3a34a05ce018779901ba03cf5b200f269b0fb5c
This commit seemed to fix everything:
https://github.com/codefireXperimen...mmit/19fe84d354927b0552cde51f5e8db2c4ccf1b3ff
tonyp23 said:
Keep getting telephony force close immediately upon booting. I think it was this commit that broke it:
https://github.com/codefireXperimen...mmit/f3a34a05ce018779901ba03cf5b200f269b0fb5c
This commit seemed to fix everything:
https://github.com/codefireXperimen...mmit/19fe84d354927b0552cde51f5e8db2c4ccf1b3ff
Click to expand...
Click to collapse
I just realized that I was comparing the wrong cm branch. Thanks for pointing that out.
Anyway, the next nightly (10/21) should have it fixed. Commit is here, for anyone interested.
https://github.com/codefireXperiment/device_lge_ls970/commit/fc0faba106e50589bfae13f7234fcf146a176cd4
SnowLeopardJB said:
I just realized that I was comparing the wrong cm branch. Thanks for pointing that out.
Anyway, the next nightly (10/21) should have it fixed. Commit is here, for anyone interested.
https://github.com/codefireXperiment/device_lge_ls970/commit/fc0faba106e50589bfae13f7234fcf146a176cd4
Click to expand...
Click to collapse
Cool, was going to just test with manual adjustment, but I'll sync and compile now to test it out. I'll report back.
so are you guys going to be maintaining the device tree?
hazedabeast said:
so are you guys going to be maintaining the device tree?
Click to expand...
Click to collapse
I will be. I am the official maintainer of the AT&T and Sprint LGOG for CodefireXperiment.

Software Update?

Did anyone take the software update out of the box? I am a bit leery to, not sure what version it is and what it fixes...
Y2J
I didn't even had a software update when I got mine a couple of days ago.
y2jdmbfan said:
Did anyone take the software update out of the box? I am a bit leery to, not sure what version it is and what it fixes...
Y2J
Click to expand...
Click to collapse
The day after I bought the phone, I saw it reboot out of the corner of my eye and noticed it was updating. I have never found info on what the update was for, but I rarely see an update automatically apply without user interaction unless it's some kind of emergency update (like to fix reception or something). It definitely applied the update without my authorization. I didn't even see a prompt.
greyhulk said:
The day after I bought the phone, I saw it reboot out of the corner of my eye and noticed it was updating. I have never found info on what the update was for, but I rarely see an update automatically apply without user interaction unless it's some kind of emergency update (like to fix reception or something). It definitely applied the update without my authorization. I didn't even see a prompt.
Click to expand...
Click to collapse
MIne auto-updated as well without my knowledge...I left the phone turned on in my bag without a SIM but connected to WiFi...Oops...
greyhulk said:
The day after I bought the phone, I saw it reboot out of the corner of my eye and noticed it was updating. I have never found info on what the update was for, but I rarely see an update automatically apply without user interaction unless it's some kind of emergency update (like to fix reception or something). It definitely applied the update without my authorization. I didn't even see a prompt.
Click to expand...
Click to collapse
Actually, mine didn't update....Can one of you that did post screen shots of the 2 software info pages?
Thanks!
Man, it is lonely in here...
Didn't get a update.
y2jdmbfan said:
Actually, mine didn't update....Can one of you that did post screen shots of the 2 software info pages?
Thanks!
Man, it is lonely in here...
Click to expand...
Click to collapse
I did not receive an update in the US on At&t either. I did manual check and it noted I was up to date.
I also agree it is quiet in here. I think this phone should be getting a lot more interest than what it is. There is a lot of potential here.
Got an update today...
five1234 said:
Got an update today...
Click to expand...
Click to collapse
I got the same!
Anyone know where the download ends up?
sidle said:
I got the same!
Click to expand...
Click to collapse
Can you provide a nand backup of your stock 1.17 Rom?
Sent from my HTC Desire Eye using Tapatalk
Probably a radio update.. or camera.. I got it, right out of the box too.. didn't even get to see what I had prior... but.. it's working like a charm so far.

[Q] Wear 5.0.1

Just wanted to make a thread to see when people start seeing the wear update roll out. Anyone got it yet?
jlagalla said:
Just wanted to make a thread to see when people start seeing the wear update roll out. Anyone got it yet?
Click to expand...
Click to collapse
There is a thread on Reddit about it as well:
http://www.reddit.com/r/AndroidWear...nyone_with_a_zenwatch_received_the_50_update/
The update appears to have posted to googles servers so it shouldn't be long now...... I hope!!
Androidpolice has a post showing that it has dropped. I can't post the link because this account is new.
MatthewC56 said:
The update appears to have posted to googles servers so it shouldn't be long now...... I hope!!
Androidpolice has a post showing that it has dropped. I can't post the link because this account is new.
Click to expand...
Click to collapse
I linked it in the reference thread. You can download it from there (or AP) and sideload via stock recovery.
MatthewC56 said:
The update appears to have posted to googles servers so it shouldn't be long now...... I hope!!
Androidpolice has a post showing that it has dropped. I can't post the link because this account is new.
Click to expand...
Click to collapse
Here you go. http://www.androidpolice.com/2014/12/15/android-wear-lollipop-ota-roundup/
Just got my 5.0.1 LWX48S OTA here in Texas!
Zen, the last letter in the Wear Alphabet
Got mine earlier. Louisiana.
First impressions?
Faxman said:
First impressions?
Click to expand...
Click to collapse
Watch faces now have sweeping second hand. Looks really nice!
Sent from my SM-G900P
Did you get some type of notification of the update or did you keep checking (like I am doing obsessively)
Faxman said:
Did you get some type of notification of the update or did you keep checking (like I am doing obsessively)
Click to expand...
Click to collapse
Update notification just popped up on its own, somewhere in between my obsessive checking..
Faxman said:
Did you get some type of notification of the update or did you keep checking (like I am doing obsessively)
Click to expand...
Click to collapse
I did a factory reset after a day off obsessively checking
Sent from my SM-G900P
Funny, I was just getting ready to do that and just got a notification that it is available. Bad news though. It wants me to charge the battery and my charger is at home.
Faxman said:
Did you get some type of notification of the update or did you keep checking (like I am doing obsessively)
Click to expand...
Click to collapse
I got notified at around 3:30 pm yesterday and went ahead and did the install. I'm in South Florida, not that location matters.
Downloading...
Got mine yesterday. Miami, Florida.
Sent from my A0001 using Tapatalk
Large Text
I just did my update. It has been sitting on my watch in agony for a few hours while I went to my wife's work Christmas party before I could get home and charge enough to update.
One thing I found that none of the reviews I've seen had mentioned is the Accessibility Mode setting that allows larger type. At 52 and at the edge of needing glasses it was a very welcomed addition!
3:30pm today. Showed a little notification on the watch.
The update seems to have fixed the persistent missed call count that can't be cleared from the watch. I should say that it cleared the missed call once... Keeping my fingers crossed that it wasn't just a fluke and it's actually working now
Got my update about 30 minutes ago here in St.Kitts and Nevis. One difference I have noticed is the heart rate sensor is more, much more accurate than before. Previously I would get a reading of 144 then if I redo it I get 78 then on another I would get 65. Now I get 68,66,65 which are much more accurate and consistent.
Anyone else notice that too?

Categories

Resources