Hi. I just flashed my F180K back to it's stock rom, then used LGNPST to flash teenybin. After that boot into recovery, pushed custom rom, the MIUI 4.2, then installed it. It just fails, almost all roms I have fails. And also the network is down upon flash if ever I used a stock rom, so I flashed baseband, and seems successful, got the signal, but most of the time, I can send any sms! Any help?
Related
I can no longer flash a new rom and boot up successfully. It goes through the entire flash process correctly, but then boots straight into CWM when i restart. I have tried to flashing back to stock via odin, then starting fresh, did a factory reset from standard recovery. I have flashed MANY times prior with no problems. The only way I can get it to boot is when I restore with Odin. Am I missing something? Any help would be greatly appreciated.
ed20910 said:
I can no longer flash a new rom and boot up successfully. It goes through the entire flash process correctly, but then boots straight into CWM when i restart. I have tried to flashing back to stock via odin, then starting fresh, did a factory reset from standard recovery. I have flashed MANY times prior with no problems. The only way I can get it to boot is when I restore with Odin. Am I missing something? Any help would be greatly appreciated.
Click to expand...
Click to collapse
Did you try twrp cwm is a broken recovery and did you flash another carriers rom
Sent from my ADR6300 using Xparent Red Tapatalk 2
I tried TWRP and same issue. Boots straight into whatever recovery I have installed. I have never had a problem with CWM before. I was running Serenity 1.1, noticed my GPS wasn't working and reverted back to stock and did factory reset. Ever since, not able to flash. I had flashed a couple of the Sprint leak roms prior to Serenity with no issues.
ed20910 said:
I tried TWRP and same issue. Boots straight into whatever recovery I have installed. I have never had a problem with CWM before. I was running Serenity 1.1, noticed my GPS wasn't working and reverted back to stock and did factory reset. Ever since, not able to flash. I had flashed a couple of the Sprint leak roms prior to Serenity with no issues.
Click to expand...
Click to collapse
flash a stock rom using odin should unroot your phone giving you stock recovery again
amzi said:
flash a stock rom using odin should unroot your phone giving you stock recovery again
Click to expand...
Click to collapse
I don't want stock recovery. I want to be able to flash again. I tried using TWRP after fresh install but still have same issue. Either I boot straight into recovery after flashing rom, or it just sits on the SGS III logo. The only thing I can flash is back to stock either already rooted or plain stock. I am at a loss. I have been flashing with no problems since august and have no idea what the problem can be. I have even tried redownloading the roms.
ed20910 said:
I don't want stock recovery. I want to be able to flash again. I tried using TWRP after fresh install but still have same issue. Either I boot straight into recovery after flashing rom, or it just sits on the SGS III logo. The only thing I can flash is back to stock either already rooted or plain stock. I am at a loss. I have been flashing with no problems since august and have no idea what the problem can be. I have even tried redownloading the roms.
Click to expand...
Click to collapse
Well fortunately for you rooting the GS3 is very easy, so do as he says, Odin to stock, re-root and flash. If you are seriously at a loss because you don't want to go through the trouble to be able to flash and root again then I suggest searching forums for someone who might have the same problem.
That's the problem, after flashing back to stock, and re rooting, I have the problem. I cannot flash anything using CWM or TWRP anymore. I am currently rooted and stock. No recovery installed. Not sure what happened and why recoveries are not working. I don't mind flashing back to stock.
Grab a stock image from sammobile.com and try that.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Evidently fifth time is a charm. Restored back to rooted stock, reinstalled apps, twrp and successfully made a back up and restored. Was able to flash Ariel. Not sure what the difference was but back up and running now. Thanks for all the suggestions.
this is just weird, as i have been installing custom ROM like crazy...
but for some time i was on CM 10.1.2 and didnt install any custom ROM, but i felt like coming back to TW based ROMs, so tried installing DeTmobilized 1.5, but phone stuck at boot screen, i tried to restart by pulling battery out but phone displayed "encryption failed" and kept on showing phone.apk stopped working (something similar). so i decided to ODIN to stock and start fresh, this time i tried installed Dandroid 3.8.1 and it worked, so i thought of giving DeTmobilized one more try, but again it got stuck at samsung letters at the boot.
so i decided to stick with Dandroid for a while, but now i cannot install that too. it gets stuck while booting. but if i ODIN to stock everything works fine on stock firmware, its only the custom ROMs that are not working.
i also tried repartitioning using PIT file along with stock md5 hoping that would solve this issue, but it hasnt.
i need help, i cannot stay on stock ROM.
thank you.
chirantan.f said:
this is just weird, as i have been installing custom ROM like crazy...
but for some time i was on CM 10.1.2 and didnt install any custom ROM, but i felt like coming back to TW based ROMs, so tried installing DeTmobilized 1.5, but phone stuck at boot screen, i tried to restart by pulling battery out but phone displayed "encryption failed" and kept on showing phone.apk stopped working (something similar). so i decided to ODIN to stock and start fresh, this time i tried installed Dandroid 3.8.1 and it worked, so i thought of giving DeTmobilized one more try, but again it got stuck at samsung letters at the boot.
so i decided to stick with Dandroid for a while, but now i cannot install that too. it gets stuck while booting. but if i ODIN to stock everything works fine on stock firmware, its only the custom ROMs that are not working.
i also tried repartitioning using PIT file along with stock md5 hoping that would solve this issue, but it hasnt.
i need help, i cannot stay on stock ROM.
thank you.
Click to expand...
Click to collapse
boot into recovery and wipe cache partition along with davik, that should fix the stuck
also do remember first boot will always take a while
also make sure you're using the latest custom recovery (either twrp or cwm)
i would also like to note here that i tried installing AOSP based ROMs also, and AOKP didnt work, got stuck at nexus like boot animation forever, but when i tried installing CM10.1.2 (which is what i was running when i tried to get back to TW based ROM) it worked perfectly, so for now i am back to CM, but i would really get back to flashing different ROMs and trying them out. just makes me wonder if CM is the reason i am not able to install anything else, just a thought...
has anybody else tried going to any other ROMs from CM 10.1.2?
your help is appreciated!
pcshano said:
boot into recovery and wipe cache partition along with davik, that should fix the stuck
also do remember first boot will always take a while
Click to expand...
Click to collapse
thanks for your reply, but i have tried doing that, i also wipe data and system along with cache and dalvik before installing any new ROM.
pcshano said:
boot into recovery and wipe cache partition along with davik, that should fix the stuck
also do remember first boot will always take a while
also make sure you're using the latest custom recovery (either twrp or cwm)
Click to expand...
Click to collapse
i have latest recovery , TWRP 2.6.0.0 and i have given more than an hour to boot up and still nothing. i have been flashing ROMs like an addict since i got this phone last year, but when CM 10.1 stable was released i stayed on it till today, but now i cannot install any other ROM, i can odin to stock 4.1.1 ROM or install cm 10.1.2 which i did just now, but no other ROM, either TW based on AOSP based is working...which is very weird for me.
Were you able to fix this issue at all? I am facing the same issue, in my case, the phone was encrypted on stock TW. I roooted and put in CM 10.1.2 and now when I try installing Dandroid, the install itself would work but I am struck at the "type password to unlock the screen". If I reflash CM10.1.2, I can login fine. Any pointers?
So I was able to use Odin to flash over a custom rom and do a rooting method (Probably screwed up somewhere) it installed SuperSU. Super SU stopped working and i updated it and thought nothing of it since I could get to my Recovery. I made a nandroid and formatted system, cache, etc. I tried to flash over Task650's AOKP and the original stock rom. I have 3 different AOKP roms and the stock rom. I have tried to use a different recovery and everytime I do it wont let me flash roms so I'm stuck. It looks like my Recoveries see that there is no root access. how can i fix this?
Hi there, I am not new to installing Roms in any way but I accidentally installed a d2lte Liquid smooth ROM instead of what my phone is, a d2att. So when installing the above ROM I did everything what I was supposed to do (clean install, format system). However, whenever I go on any ROM (Such as Quantum or Omni) I get an error as soon as it boots up, and my signal keeps turning on and off. I wiped data, cache and dalvik twice and go to a new ROM and the problem persists. For some odd reason, Carbon ROM works but I need a different one due to battery drain. I've never experienced this problem ever and I was hoping someone could please help me out?
Have you tried re-flashing the modem?
audit13 said:
Have you tried re-flashing the modem?
Click to expand...
Click to collapse
Yes i tried that earlier but still no luck. It's weird though how there was no problem on carbon rom and yet there was a problem when i went back to the Quantum Rom. Something happened on the LiquidSmooth Rom but i don't know what. I will again try reflashing the modem though thank you.
EDIT: Re-flashing modem did not help
Is it possible to use Odin to get back to a completely stock rom? If you have a 4.3 bootloader, you can't use Odin to flash a stock ROM.
A way to get back to a stock ROM for those on the MJB bootloader has been provided by enewman17. See AT&T I747 UCUEMJB Stock Restore in the development forum.
My LG G2 is on the latest version LS980ZVC rooted and latest TWRP Recovery(2.7.0.0). When I flash the latest CM11 nightly and GAPPS, Everything is successful. Problem is when I try to boot it, it won't go passed the LG Logo. I've tried factory reseting it through recovery while the rom is still flashed but to no luck.
I am not new to flashing as I've been doing it since the HTC Evo.
I've tried for the past couple of days searching through this site and the internet on my issue. When the ZVC update first came around there was a thread in the Sprint android development section that explained how flash any rom after the ZVC update and now I cannot find this thread.
Also, When I flash Mahdi Rom, it flash and boots perfectly fine. Only problem is, I get no data and service goes away completely and doesn't come back unless I reflash the rom. But it only lasts for about 5 minutes before it just drops again. When I switch back to stock and I find that I have to go into my mobile network settings and switch from global/wcdma back to lte/cdma in order to get service back.
Any help will be greatly appreciated.
anthony62 said:
My LG G2 is on the latest version LS980ZVC rooted and latest TWRP Recovery(2.7.0.0). When I flash the latest CM11 nightly and GAPPS, Everything is successful. Problem is when I try to boot it, it won't go passed the LG Logo. I've tried factory reseting it through recovery while the rom is still flashed but to no luck.
I am not new to flashing as I've been doing it since the HTC Evo.
I've tried for the past couple of days searching through this site and the internet on my issue. When the ZVC update first came around there was a thread in the Sprint android development section that explained how flash any rom after the ZVC update and now I cannot find this thread.
Also, When I flash Mahdi Rom, it flash and boots perfectly fine. Only problem is, I get no data and service goes away completely and doesn't come back unless I reflash the rom. But it only lasts for about 5 minutes before it just drops again. When I switch back to stock and I find that I have to go into my mobile network settings and switch from global/wcdma back to lte/cdma in order to get service back.
Any help will be greatly appreciated.
Click to expand...
Click to collapse
same you, i was do that and flash radio for ZVC LS980 but the phone reboot loop, i was try from ZV8 > root > custom recovery > Flash cm11 + radio, it worked but the sim card can't make call and recive message,...so sad
skygatevn said:
same you, i was do that and flash radio for ZVC LS980 but the phone reboot loop, i was try from ZV8 > root > custom recovery > Flash cm11 + radio, it worked but the sim card can't make call and recive message,...so sad
Click to expand...
Click to collapse
Yeah I tried that as well and I would get 3G data but phone calls or texts didn't work either for me.
Zv8 modem
The CM11 nightlies aren't made to work with the new ZVC kernel and baseband. In order to flash CM11 from ZVC you need to obtain the ZV8 modem and flash BEFORE the ROM and GAPPS. Boot to recovery and wipe everything except internal storage 3x to make sure everything is wiped. Then flash the modem rom and gapps in that order exactly otherwise it won't work. After everything flashes clear the davlik cache and cache 3x then reboot to system. Been using this method since I got my phone and it works everytime with every ROM I've tried. Also for those interested in unlocking US GSM capabilities do this then install an app called Tellinfo, from there you can do everything to change over to your GSM bands and use a GSM SIM card. I've been on AT&T for 3 months now.