Hi i have been given a HOX to look at and it's had me stumped for the last 24 hours so now i'm asking for help. Here we go.
The phone has no IMEI/Baseband. The fasboot getvar all command returns the correct IMEI to the box but it just doesn't show in android so no signal at all stuck on airplane mode etc. It's a TMOB005 cid.
Tried loads of custom roms and methods no signal.
Tried to return to stock to flash stock RUU. My main 3.16.110.4 so try RUU RUU_ENDEAVOR_U_ICS_40_S_TMO_UK_2.17.110.5_Radio_2.1204.137U.21_release_284360_signed.exe it fails with script error and all other RUU fail at bootloader version.
I downloaded recommended nandroid for my main. 2012-10-29.07.35.43 from thread on here. Flashed boot img in fastboot. Flashed stock 1.29 recovery. Got the small 1.25mb OTA but then nothing after that and still no signal.
Tearing my hair out now. HBOOT is 1.39. Let me know if i've missed any info please any ideas now will help.
Oke i will give it a go !
You restored a 2.17 nandroid backup ? And flashed back a 1.29 stock recovery ?
In this case your rom won't respond to touch on screen ! You say your main version is 3.16 then you need a nandroid backup with at least that number....and a stock 3.16 recovery and not a 1.29 one
So.....enlighten me ?
Now you have me all confused?! The touch screen works fine with the stock recovery i flashed. It's one you recommended to someone else in a TMOB005 thread i saw. I'm not sure recovery is the real issue here anyway. The issue is not being able to flash an RUU, stock not doing the OTA it only reports the small one 1.25MB. Never asked for Jellybean OTa it just doesn't want to work.
The nandroid should be correct too as it's a TMOB005 one too.
If you can help let's start from my main as we know that's 100% right.
So what nandroid stock rom do i need, what recovery and anything else required?
Thanks for reply so far.
Oke you need a stock nandroid backup 3.16 if you have it (or already restored it) that's good then. Now we need your stock 3.16 recovery and not the 1.29 one.....
Is your 3.16 number matching this command ?
Fastboot getvar version-main
Ok I'll check when I'm at home next, I'll still appreciate any help/ideas/input from anyone. I'm sure my version matches the one with the version main command.
Does the recovery version have to match too? Where would I find the relevant one?
Try this one
http://db.tt/mp3v3KrP
Mr Hofs said:
Try this one
http://db.tt/mp3v3KrP
Click to expand...
Click to collapse
Thanks and is the nan droid I mentioned the correct one at all? Like I say it offers the small OTA does that have any significance?
Is there no possible way to flash ANY RUU?!
If the nandroid matches the main version number 3.16.110 then you have indeed the correct one. And no a ruu is not available so that's not possible atm.
I saw something about an RUU hack where it makes it think you have an older version or is that not possible any more? The custom RUU file isn't available for download any more.
Well its probably possible for some, but if the phone has updated touch drivers then its of no use. Ics and lower roms don't work because touchscreen doesn't respond !
And the OP is on 3.16 so that's a no go.
From 3.14 and lower it could work.
"fastboot getvar version-main" returns that my main is definitely 3.16.110.4. So what nandroid for definite matches and what recovery? Can anyone provide links please? Is 3.16.110.4 supposed to be Jellybean?!
Yes 3.16 is Jellybean. And the recovery will be in the nandroid backup, as well as the boot.img.
Will the nandroid backup not have clockwork mod recovery in it as that is required to make the backup?!
Hold on....
you have the 3.16.110 nandroid backup ?
No i have a main of 3.16.110.4. I have the 2.17.110.5 nandroid as i understand this should work for OTA as i read in another thread. As long as the red part matches. I have installed a 3.16 stock recovery too yet STILL not being offered the proper OTA (still get the 1.25MB one) plus the phone is still stuck without IMEI or baseband.
EDIT:
This guy you helped here... http://forum.xda-developers.com/showthread.php?t=2204955 was offered the OTA after using the same nandroid as me so what's going on?!
Well give it a go then !!!
Here is the 2.17 stock recovery......trying to recall what i missed/forgot.
http://db.tt/OtcxVXh5
Mr Hofs said:
Well give it a go then !!!
Here is the 2.17 stock recovery......trying to recall what i missed/forgot.
http://db.tt/OtcxVXh5
Click to expand...
Click to collapse
Still no offer of the OTA hmm. It's such a shame we can't change CID or flash any RUU as I'm sure that would help me. I'm just stuck and this phone is useless.
What ota are you talking about anyway ? Restore the 2.17 nandroid and the 2.17 stock recovery and then ota up to JB !
Mr Hofs said:
What ota are you talking about anyway ? Restore the 2.17 nandroid and the 2.17 stock recovery and then ota up to JB !
Click to expand...
Click to collapse
That's exactly my aim but it's not happening.i've restored the correct nandroid (100% certain) unless there is a 3.16 nandroid? Then i've tried with stock recovery 3.16 and 2.17 both times. The only OTA i get offered is the first 1.25MB one and that's it nothing after it. Tried with bootloader locked and unlocked although this shouldn't matter.
Do you need GSM signal to be offered the OTA? As if you do i'll never get offered it as i don't have an IMEI or baseband etc.
I appreciate all the help you are offering Mr Hofs i see you have helped a LOT of people on here.
Just tried the recovery 2.17 that you uploaded as it's a diferent size to the ones i've previously tried but still no luck. No OTA at all.
Is stock recovery supposed to just show a red triangle? It's shows green first then changes to a red triangle ni'm not sure this is right even with bootloader locked.
Does recovery have to match as in 2.17.110?
No this stock 2.17 recovery works on branded phones too, its weird but indeed it could be related to no baseband and imei !
Related
I am Android version 4.0.4 and apparently my HTC is HTC_622
sense 4.1
software: 2.17.708.7
I got an OTA update to 4.1 (software update:3.14.708.28 to be exact) and after I wait for it to download and I let it update, problems start to happen.
I had CWM recovery before so I flashed back stock recovery (the 622 from here : http://d-h.st/users/ClydeB1/?fld_id=8386#files ) and tried to update. I made it to the recovery and see the green arrow icon with the loading bar. But when it loads to a 1/4 or about 1/3, it green icon changes to the red exclamation and then it just freezes. Then I have to soft reboot. I load back to my original stock ROM and the update is not applied (obviously). I am unsure about what's going on. I also tried flashing this recovering :http://d-h.st/yDf and it did not work either. I tried this recovery because my current software is 2.17 but then the OTA update is 3.14 For both recoveries, I've tried with the boot loader locked/unlocked and I still have no luck.
Am I doing something wrong? I need to be in full stock to apply the OTA right? So then I Just flashed the stock recovery and relocked the bootloader.
I'm just glad it isn't boot looping like before. Thanks in advance.
firzen_net said:
I am Android version 4.0.4 and apparently my HTC is HTC_622
sense 4.1
software: 2.17.708.7
I got an OTA update to 4.1 (software update:3.14.708.28 to be exact) and after I wait for it to download and I let it update, problems start to happen.
I had CWM recovery before so I flashed back stock recovery (the 622 from here : http://d-h.st/users/ClydeB1/?fld_id=8386#files ) and tried to update. I made it to the recovery and see the green arrow icon with the loading bar. But when it loads to a 1/4 or about 1/3, it green icon changes to the red exclamation and then it just freezes. Then I have to soft reboot. I load back to my original stock ROM and the update is not applied (obviously). I am unsure about what's going on. I also tried flashing this recovering :http://d-h.st/yDf and it did not work either. I tried this recovery because my current software is 2.17 but then the OTA update is 3.14 For both recoveries, I've tried with the boot loader locked/unlocked and I still have no luck.
Am I doing something wrong? I need to be in full stock to apply the OTA right? So then I Just flashed the stock recovery and relocked the bootloader.
I'm just glad it isn't boot looping like before. Thanks in advance.
Click to expand...
Click to collapse
I have the exate same problem, but mi CID its the HTC__001 from UK. I don't understand whats happening!
This is def the right recovery you need
http://db.tt/U5CK4noo
If you made any changes to the rom (like removing bloatware) the update will also fail !
MarcelHofs said:
This is def the right recovery you need
http://db.tt/U5CK4noo
If you made any changes to the rom (like removing bloatware) the update will also fail !
Click to expand...
Click to collapse
I don't know if the problem it's in the recovery, i have that version of recovery, ant it does'nt work either.
Then you definitively made a change somewhere, or in the rom or the boot.img....
MarcelHofs said:
Then you definitively made a change somewhere, or in the rom or the boot.img....
Click to expand...
Click to collapse
Well i don't recall of doing that, but doesn't matter, today i will try to flash both the boot.img and that recovery, lets see if that will work. Then i let my feedback in this thread. Thank you in advance.
No problem mate, always try to help. We get to the bottom of this
Well i tried flashing boot.img and recovery.img, but it's the same problem, it just doesn't install, gives me the same problem, red triangle.
I'm lost, don't now what to do.
rdiogo said:
Well i tried flashing boot.img and recovery.img, but it's the same problem, it just doesn't install, gives me the same problem, red triangle.
I'm lost, don't now what to do.
Click to expand...
Click to collapse
Get your cid and main version
Fastboot OEM readcid
Fastboot getvar version-main
And check the nandroid collection in the general thread, if it's there you download it and restore it ! After that flash the stock recovery and check for the update again !
MarcelHofs said:
Get your cid and main version
Fastboot OEM readcid
Fastboot getvar version-main
And check the nandroid collection in the general thread, if it's there you download it and restore it ! After that flash the stock recovery and check for the update again !
Click to expand...
Click to collapse
My CID it's HTC__001, but was bought in expansys, and came from UK, the main version i got to look.
I talk in the chat with HTC yestarday, and they told me that the update for my version only comes out monday, 24 of December, because my phone had come from the UK. But i told her that i already had the update available, but it gave me an error in the instalation...that's when she told me to make a factory reset, and it didn't work.
Thanks for your help.
Do the getvar command, you might be trying to use the wrong recovery...that or get the 1.36 FW from the dev section and then relock and flash the 3.14.401.27 RUU
My HOX is currently running ARHD 18.2 and i have a hboot 1.39 and i want to go back to stock
1)i can't find JB ruu for j_15
2)do i need to downgrade my hboot in order to flash a ICS ruu
3)how to downgrade
You cant downgrade in any way unless you have an s-off device. You need a stock nandroid backup !
Just checked ... there is a nandroid backup available for you
http://forum.xda-developers.com/showthread.php?t=1975140
Restore it including the boot.img and you are back on stock
i have a nandroid backup i made i when i first rooted my device.
I can only go to the stock JB now or i can never go to stock again??
abdussamad said:
I can only go to the stock JB now or i can never go to stock again??
Click to expand...
Click to collapse
What do you mean exactly. If you have a stock nandroid backup you are actually going back to stock ....
does other numbers matters apart from 415 because it has to backups 3.16.415.4|1.29.415.x.and i have a stock ruu rom that i installed once has no's 2.17.415.2
Mr Hofs said:
What do you mean exactly. If you have a stock nandroid backup you are actually going back to stock ....
Click to expand...
Click to collapse
i get it
Depends on what you really want. The nandroid backup 3.16.415 is the stock JB......the ruu with 2.17 won't work anymore because of the updated hboot.
Mr Hofs said:
Depends on what you really want. The nandroid backup 3.16.415 is the stock JB......the ruu with 2.17 won't work anymore because of the updated hboot.
Click to expand...
Click to collapse
i just want to get back to stock cuz my phone is acting crazy like all of a sudden preparing sim,heating up in normal use etc
Ah like that. According to your hboot (1.39) you have to restore the 3.16 nandroid backup. That's the stock one matching your hboot number
Mr Hofs said:
Ah like that. According to your hboot (1.39) you have to restore the 3.16 nandroid backup. That's the stock one matching your hboot number
Click to expand...
Click to collapse
is there anything else i should knw
You need to flash the boot.img, do a full wipe in the custom recovery and restore the nandroid. Then you will have the stock software back on the phone :thumbup:
Mr Hofs said:
You need to flash the boot.img, do a full wipe in the custom recovery and restore the nandroid. Then you will have the stock software back on the phone :thumbup:
Click to expand...
Click to collapse
THANKS
one more thing can i keep custom recovery with my stock rom or i have to flash stock recovery in any case
No you can run the rom fine with a custom recovery.....the only thing you can't do is update the phone with official ota
Is it possible to downgrade hboot from 1.39?
I think my hox failed when i upgraded to 1.39. I have tried all diffrent kind of roms and RUU.
The symtoms: The desk freeze up and I have to use powerbutton to get the panel to work again. And it sometimes start flickering and I have to use powerbutton to get it straight. The wifi don't work when i wakeup the phone, I have to restart wifi to get in running.
No not possible unless your phone is S-Off but that's very unlikely.....
You cab however flash the standalone firmware again to make sure your bootloader/hboot is without errors
You can check this thread for that .
http://forum.xda-developers.com/showthread.php?t=1957376
Mr Hofs said:
No not possible unless your phone is S-Off but that's very unlikely.....
You cab however flash the standalone firmware again to make sure your bootloader/hboot is without errors
You can check this thread for that .
http://forum.xda-developers.com/showthread.php?t=1957376
Click to expand...
Click to collapse
If I really really want to do a super duper factory reset. What should I do? I'm on ARDH 18.2 and hboot 1.39.
Back to basic as far as i can...
Thanks for assisting.
Sorry for bothering you guys again ^^
Finally I found some informations about updating HBOOT one my HOX, but I don't want to ruin it, so i wanted to ask you if I understood everything^^
My acutal HBOOT is 1.12, my main-version (dunno what exactly it is called) is 2.17.771.3 and my CID is H3G__106 (Hutchison 3, Austria).
Currently I am on ICJ 1.72.
I've found the following threads:
H3G BRANDED JB | Manual Update, Nand, OTA File, Firmware.zip [4/2]
[TUT] How to upgrade HOX with a RUU(hboot.img, etc..) after installed a custom rom
[COLLECTION]Stock Nandroid Backups for Different CIDs
Unfortunately I'm not sure which firmware.zip, etc. I have to use to update my HBOOT on 1.39(?, I think it's the actual version) to use ICJ 2.1.
I would be pleased if you can help me and tell me what to do and which firmware.zip, etc. I should use.
cheers,
z3xi0n
z3xi0n said:
Sorry for bothering you guys again ^^
Finally I found some informations about updating HBOOT one my HOX, but I don't want to ruin it, so i wanted to ask you if I understood everything^^
My acutal HBOOT is 1.12, my main-version (dunno what exactly it is called) is 2.17.771.3 and my CID is H3G__106 (Hutchison 3, Austria).
Currently I am on ICJ 1.72.
I've found the following threads:
H3G BRANDED JB | Manual Update, Nand, OTA File, Firmware.zip [4/2]
[TUT] How to upgrade HOX with a RUU(hboot.img, etc..) after installed a custom rom
[COLLECTION]Stock Nandroid Backups for Different CIDs
Unfortunately I'm not sure which firmware.zip, etc. I have to use to update my HBOOT on 1.39(?, I think it's the actual version) to use ICJ 2.1.
I would be pleased if you can help me and tell me what to do and which firmware.zip, etc. I should use.
cheers,
z3xi0n
Click to expand...
Click to collapse
Well i would go with the nandroid backup (the one with from the last link) get your nandroid backup from there matching your MAIN number .... 2.17.771
You unzip the nandroid backup to the phone (read the OP to where exactly) then you flash the boot.img from that nandroid (located in the folder) and perform a full wipe in the custom recovery and restore the nandroid, boot it once to check the phone runs as new...all Oke, flash back the stock 2.17 recovery and reboot the phone and check for software updates.
And as for the firmware flash, the thread could not have typed it out better.....you need the part that says NAND H3G__106......
All the commands are in there and the links too
Mr Hofs said:
Well i would go with the nandroid backup (the one with from the last link) get your nandroid backup from there matching your MAIN number .... 2.17.771
You unzip the nandroid backup to the phone (read the OP to where exactly) then you flash the boot.img from that nandroid (located in the folder) and perform a full wipe in the custom recovery and restore the nandroid, boot it once to check the phone runs as new...all Oke, flash back the stock 2.17 recovery and reboot the phone and check for software updates.
And as for the firmware flash, the thread could not have typed it out better.....you need the part that says NAND H3G__106......
All the commands are in there and the links too
Click to expand...
Click to collapse
Well, thanks! I'll try it in the evening.
A last question: After doing the nandroid backup and firmware flash my HBOOT will be 1.39, am I correct?
Yes you are going to hboot 1.39.
But keep one thing in mind, only do one of the options. If you go for the nandroid backup you do not have to do the firmware flash......when you restore the nandroid backup completely including the boot.img and stock recovery you check in settings - about - softwareupdates for the official OTA and install that. The OTA will flash the hboot automatically and will update the software to JB :thumbup:
Mr Hofs said:
Yes you are going to hboot 1.39.
But keep one thing in mind, only do one of the options. If you go for the nandroid backup you do not have to do the firmware flash......when you restore the nandroid backup completely including the boot.img and stock recovery you check in settings - about - softwareupdates for the official OTA and install that. The OTA will flash the hboot automatically and will update the software to JB :thumbup:
Click to expand...
Click to collapse
Well, it came to my mind that I only have the phone with the Hutchison 3 branding, but it is unlocked and I have another provider. Does this conflict with the option to do the nandroid backup and checking for software updates?
And if not, I think I have to unlock the phone again and do that stuff to flash a custom rom?
Ai i can't answer your first question, never encountered that before .... as for the second question, with a nandroid backup you do not have to relock the bootloader. So after the updating process you flash back the custom recovery and flash a new JB rom.
Mr Hofs said:
Ai i can't answer your first question, never encountered that before .... as for the second question, with a nandroid backup you do not have to relock the bootloader. So after the updating process you flash back the custom recovery and flash a new JB rom.
Click to expand...
Click to collapse
Well, okay. So I will just test it, and if I don't get any updates I can switch back to my old version of ICJ am I right?
Yes ofcourse .... do a nandroid of the rom you are running now and after that you restore the stock nandroid backup.
Don't forget to flash the boot.img again when you return to the old one
Well,
I tried the nandroid backup from this thread but I only get some md5 checksum errors...
Then I tried it twice with the backup from here but here I get sometimes a black screen (display is ON) after the htc logo and sometimes it goes past the black screen and comes to the screen where you see "HTC ONE BEATS AUDIO" and there it gets stuck.
I also did a full wipe every time before doing the backup and I also flashed the boot.img from the backup
Any ideas? :/
cheers,
z3xi0n ;D
I got simillar effect while trying to restore backup from that thread
And im actually in a boot loop for allmost two weeks, so i'll stick around for some usefull ideas
When you read the OP of the first thread there is a workaround for the MD5 error
Mr Hofs said:
When you read the OP of the first thread there is a workaround for the MD5 error
Click to expand...
Click to collapse
Uh, my bad I'll try it again in the evening ^^ Thanks for helping a poor noob
status update ^^
Used the backup from here, searched for OTA update (got one), tried to install it. Phone switched into recovery and I got some errors. Looked it up in google, found this site and removed this part
Code:
assert(check_cid(getprop("ro.cid"), "00000000" , "11111111" , "22222222" , "33333333" , "44444444"
, "55555555" , "66666666" , "77777777" , "88888888" , "99999999" , "HTC_……);
After this I was able to install the update (in recovery, using "install zip from sdcard"). After the update the phone reboots and gets stuck on the HTC logo. Hboot is still on 1.12. Now I used my old backup cause I need the phone tomorrow again. Any ideas how to get the update fully working? :/
cheers ^^
Then i guess the update fails because you need a backup matching your cid too !
Because the nandroid backup was for another cid (O2 and orange backups where compatible with different cids)
You can try to only perform the firmware flash to update the hboot and then flash a JB custom rom after that.
Mh, okay. Then I'll try it with a firmware update. But I am a little bit confused because when I deleted the part with assert(check_cid(...)) etc. I saw my CID, H3G__106, in this part.
z3xi0n said:
Mh, okay. Then I'll try it with a firmware update. But I am a little bit confused because when I deleted the part with assert(check_cid(...)) etc. I saw my CID, H3G__106, in this part.
Click to expand...
Click to collapse
Hmm okey, well i can't shine a light on that im afraid, but if the nandroid fails (who said that the nandroid is 100% stock anyway, we believe the uploader on that ) your best chance is with the direct firmware flash
Am I right that I have to do it with this manual? And do I have to install at first this stock backup or can I flash the firmware directly on my acutal ROM?
1) go into fastboot and enter "fastboot oem lock" - the device will reboot
2) go into fastboot again and enter "fastboot oem rebootRUU" - there will be a black screen with a silverish HTC logo
3) enter "fastboot flash zip firmware.zip" (you need the firmware.zip from page 1 for this)
3a) enter the same again, the green bar under the logo should go to 100% (either after the first or second time)
4) enter "fastboot reboot-bootloader" to go back to your fastboot
5) unlock your device again with the unlock code ("fastboot flash unlocktoken Unlock_code.bin")
6) Restore your old boot.img (fastboot flash boot name_of_boot_file.img) and recovery (fastboot flash recovery name_of_recovery_file.img), make sure you copied them from the nandroid backup folder we created earlier into the folder that contains the fastboot.exe you're using.
(7) Reboot and you should now have Hboot 1.39 with your old boot and recovery.
(8) If it won't work we still have the backup ready to restore the old system, Hboot isn't changeable right now on S-ON devices outside of the RUU routine - so even if you restore your nandroid you should still have Hboot 1.39 now)
Click to expand...
Click to collapse
Yes thats correct. No neef to flash the stock recovery. Directly the firmware is enough. But reflash the rom with boot.img right after that....
---------- Post added at 12:07 PM ---------- Previous post was at 11:17 AM ----------
Any succes ?
Well, now I did the firmware flash, put ICJ 2.1 on the phone and it works, but the phone doesn't get my sim card. Any ideas? ^^
Uhm well......does that rom needs a modified boot.img for the higher hboots maybe ? Just like the CM10. I would try it first with a full sense JB rom to make sure that everything works as it should, or try CM10.1 ?
Did you checked that the hboot is actually upgraded ?
Or could this have something to do that you unlocked it from the carrier ?
Hi, I'm trying to restore my phone back to stock firmware with the ability to update through the usual HTC update route (directly on the phone). I have attempted RUU RUU_ENDEAVOR_U_ICS_40_HTC_Europe_1.20.401.1_Radio_1.1204.71.08_release_249238_signed and RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.27_Radio_5.1204.162.29_release_298897_signed but neither work. Both error with error 140.
It's running hboot 1.39
How can I get it back to stock?
Post you main version !
Fastboot getvar version-main
Mr Hofs said:
Post you main version !
Fastboot getvar version-main
Click to expand...
Click to collapse
Just checked, 3.20.401.1
Then use a stock nandroid backup. There is no ruu Got that number.
Get one here
http://bugsylawson.com/files/category/6-cwm-backups/
Cid is not important they are all wwe. After an update its all good again.
Don't forget to flash back the stock recovery too after restoring.
Mr Hofs said:
Then use a stock nandroid backup. There is no ruu Got that number
Click to expand...
Click to collapse
I grabbed one off the the thread full of them (it didn't have the same number so I tried 3.14) however I can't get Clockwork to restory it, and the other recovery has no touch input on this version of the phone?
Thanks for the help
Ah just saw your edit, thanks for the link I'll try that now
loony383 said:
I grabbed one off the the thread full of them (it didn't have the same number so I tried 3.14) however I can't get Clockwork to restory it, and the other recovery has no touch input on this version of the phone?
Thanks for the help
Ah just saw your edit, thanks for the link I'll try that now
Click to expand...
Click to collapse
Worked perfectly thank you, will I need to relock my bootloader or anything like that?
No not for a update. Leave it unlocked. But don't forget the stock recovery before updating
I've put on the stock recovery and boot (as the viper one has no network on stock rom) ready for whenever the next update comes out, thanks for your help
No problem :thumbup:
CASE CLOSED !
My Hboot is 1.39
and i wanted to know what is the latest Hboot for this CID
as i saw some guys here having the same CID and have Hboot v1.73
So can someone help before i screw up my phone ?
BTW i am currently with ARHD 31.3
Also , My stock backup is gone , so thats an issue and i didn't find a ruu for my phone.
Some hints :
Fastboot getvar version-main
That command gives you the nand number you need. Check in the general section for the nandroid backup collection. And restore the one you need if it's available for download. After restore you need to flash back the stock recovery and update. How to is described there too.
And yes there are updates waiting for you.
Cheers.
Ruu is not available indeed. And if there is no nand available just keep on using a sense 5 rom if you want. All current roms work on your 1.39 hboot.
oRmA2 said:
My Hboot is 1.39
and i wanted to know what is the latest Hboot for this CID
as i saw some guys here having the same CID and have Hboot v1.73
So can someone help before i screw up my phone ?
BTW i am currently with ARHD 31.3
Also , My stock backup is gone , so thats an issue and i didn't find a ruu for my phone.
Click to expand...
Click to collapse
If you wish to update the hboot, all u need to do is do a nandroid restore to 4.0.4 (which is available in this forum)..fastboot flash stock boot.img, and fastboot flash stock recovery.img and lastly relock the bootloader..then update your phone normally via OTA to get the latest rom and hboot..unlock and install custom roms...that's it...
And do NOT loose another stock backup again !
Edit :
Relocking the bootloader is not needed. The 1.29 and the 3.16 are available. The 1.29 is probably of no use because i don't think you find official ota with that anymore. The 3.16 may be of use but therefore we need your main. If your main is lower you cant use it either !
You can find them here
http://forum.xda-developers.com/showthread.php?t=1975140
@amirage where is the 4.0.4 ? I can't see it at this moment.....another thread ?
1.29 = 4.0.3
3.16 = 4.1.1