Develop Bugs

MyoneV RC 3.0 Installation Instruction

Hi everyone,
I'm new to modding and can't wait to get started. Can anybody simplify or expound in detail the instructions below
to a noob like me
Instructions:
1. Extract boot.img from the myONEv RC3.0.zip for the kernel. (Where exactly do I put it?)
2 Boot into bootloader - fastboot flash boot boot.img - fastboot reboot-bootloader - fastboot erase cache (How do I do this?)
3. Boot into recovery - flash myONEv RC3.0.zip (How?)
Thanks,
Noob

Before we can advise details on the above questions, you need to answer these questions first:
1) Is your phone bootloader unlocked ?
2) Do you have CWM or TWRP recovery installed ?

MyOneV
ckpv5 said:
Before we can advise details on the above questions, you need to answer these questions first:
1) Is your phone bootloader unlocked ?
2) Do you have CWM or TWRP recovery installed ?
Click to expand...
Click to collapse
Hi,
I have unlocked my bootloader and Clockworkmod

DesertTiger said:
Hi,
I have unlocked my bootloader and Clockworkmod
Click to expand...
Click to collapse
I believe you do have fastboot.exe that you use to unlock bootloader.
Put the myONEv RC3.0 in your sdcard.
1. Extract boot.img from the myONEv RC3.0.zip for the kernel. (Where exactly do I put it?)
Take out the boot.img from the zip and put it in the fastboot folder where you have the fastboot.exe
2 Boot into bootloader - fastboot flash boot boot.img - fastboot reboot-bootloader - fastboot erase cache (How do I do this?)
Open CMD prompt and CD to your fastboot folder and do the step:
fastboot flash boot boot.img <enter>
fastboot erase cahe <enter>
3. Boot into recovery - flash myONEv RC3.0.zip (How?)
Press power button once, you'll be in hboot
use the volume button to select recovery
press power to go to recovery
- install zip from sdcard
- choose zip from sdcard
scroll down to pick myONEv RC3.0.zip
scroll to chose Yes - Install myONEv_RC3.0.zip
and follow the installation process. Once complete, reboot
enter all details for setup, you are done.

one v
ckpv5 said:
I believe you do have fastboot.exe that you use to unlock bootloader.
Put the myONEv RC3.0 in your sdcard.
1. Extract boot.img from the myONEv RC3.0.zip for the kernel. (Where exactly do I put it?)
Take out the boot.img from the zip and put it in the fastboot folder where you have the fastboot.exe
2 Boot into bootloader - fastboot flash boot boot.img - fastboot reboot-bootloader - fastboot erase cache (How do I do this?)
Open CMD prompt and CD to your fastboot folder and do the step:
fastboot flash boot boot.img <enter>
fastboot erase cahe <enter>
3. Boot into recovery - flash myONEv RC3.0.zip (How?)
Press power button once, you'll be in hboot
use the volume button to select recovery
press power to go to recovery
- install zip from sdcard
- choose zip from sdcard
scroll down to pick myONEv RC3.0.zip
scroll to chose Yes - Install myONEv_RC3.0.zip
and follow the installation process. Once complete, reboot
enter all details for setup, you are done.
Click to expand...
Click to collapse
Thaank you!

ckpv5 said:
I believe you do have fastboot.exe that you use to unlock bootloader.
Put the myONEv RC3.0 in your sdcard.
1. Extract boot.img from the myONEv RC3.0.zip for the kernel. (Where exactly do I put it?)
Take out the boot.img from the zip and put it in the fastboot folder where you have the fastboot.exe
2 Boot into bootloader - fastboot flash boot boot.img - fastboot reboot-bootloader - fastboot erase cache (How do I do this?)
Open CMD prompt and CD to your fastboot folder and do the step:
fastboot flash boot boot.img <enter>
fastboot erase cahe <enter>
3. Boot into recovery - flash myONEv RC3.0.zip (How?)
Press power button once, you'll be in hboot
use the volume button to select recovery
press power to go to recovery
- install zip from sdcard
- choose zip from sdcard
scroll down to pick myONEv RC3.0.zip
scroll to chose Yes - Install myONEv_RC3.0.zip
and follow the installation process. Once complete, reboot
enter all details for setup, you are done.
Click to expand...
Click to collapse
Whoops, when I select recovery, the phone restarts. There is no option that allows me to "install zip from sdcard"

Which recovery that you flashed ?
Can you point the thread ?
Or you can use any of these
http://forum.xda-developers.com/showpost.php?p=25673379&postcount=1
http://forum.xda-developers.com/showpost.php?p=28153112&postcount=1
And your device is PrimoU / GSM right ?

ckpv5 said:
Which recovery that you flashed ?
Can you point the thread ?
Or you can use any of these
http://forum.xda-developers.com/showpost.php?p=25673379&postcount=1
http://forum.xda-developers.com/showpost.php?p=28153112&postcount=1
And your device is PrimoU / GSM right ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1635520
Yes, my device is PrimoU

ckpv5 said:
Which recovery that you flashed ?
Can you point the thread ?
Or you can use any of these
http://forum.xda-developers.com/showpost.php?p=25673379&postcount=1
http://forum.xda-developers.com/showpost.php?p=28153112&postcount=1
And your device is PrimoU / GSM right ?
Click to expand...
Click to collapse
Thank you! Successfully installed MyOneV Rc.3.0 FTW! :victory:

ckpv5 said:
1. Extract boot.img from the myONEv RC3.0.zip for the kernel. (Where exactly do I put it?)
Take out the boot.img from the zip and put it in the fastboot folder where you have the fastboot.exe
2 Boot into bootloader - fastboot flash boot boot.img - fastboot reboot-bootloader - fastboot erase cache (How do I do this?)
Open CMD prompt and CD to your fastboot folder and do the step:
fastboot flash boot boot.img <enter>
fastboot erase cahe <enter>
Click to expand...
Click to collapse
And till here i should have just plugged one v into the computer, right? Or should i also select fastboot from the hboot?

Yes...plug One V to your PC and select fastboot from hboot.

u must select fastboot from hboot and then plug in
it will state as fastboot usb
then progress with the kernel flashing
Sent from my HTC One V

Want to do it easy? Just Use Flashtool Dude,It Will be done in less than 5 minutes
Sent from my ST15i using xda app-developers app

Singgih4050 said:
Want to do it easy? Just Use Flashtool Dude,It Will be done in less than 5 minutes
Sent from my ST15i using xda app-developers app
Click to expand...
Click to collapse
Is that safe?

soham_sss said:
Is that safe?
Click to expand...
Click to collapse
Yup it's safe.....
sent from heaven.....

handryg555 said:
Yup it's safe.....
sent from heaven.....
Click to expand...
Click to collapse
Hey, and how to root/gain super user??(using this tool, i mean)

soham_sss said:
Hey, and how to root/gain super user??(using this tool, i mean)
Click to expand...
Click to collapse
There's an Unlock icon to root the phone dude,Remember it's not for Unlock Bootloader of the phone
Sent From My Xperia Mini ST15i

no, its all okay, i did it using the normal method.

[Q] stuck on splash loop

Ok I've looked everywhere but can't find anything solid to help me.
I installed this
rom http://forum.xda-developers.com/showthread.php?t=1727657
factory reset, put it on sd card, used TWRP to install from zip and install gapps, wiped cache, when I reboot it just loops the HTC splash
What have I missed out? I just can't work it out.
I can still use bootloader and twrp
I've also seen people say go into fastboot and type this and that, how do you type in fastboot?
Thanks in advance for any help

flash the boot.img with "fastboot flash boot boot.img" the "fastboot erase cache" and you should be fine
go into bootloader and connect your phone to your pc and your click fastboot in your phone and it should say FASTBOOT USB the just type the above in CMD
and one more thing your hboot must be 1.31 or higher

Have you repacked an AOSP kernel with the boot.img ??

The5alodi said:
flash the boot.img with "fastboot flash boot boot.img" the "fastboot erase cache" and you should be fine
go into bootloader and connect your phone to your pc and your click fastboot in your phone and it should say FASTBOOT USB the just type the above in CMD
and one more thing your hboot must be 1.31 or higher
Click to expand...
Click to collapse
my hboot is 1.36
cmd doesnt recognise any of those, I don't understand do I have to change the directory to my phone or something?

Vulbastick said:
my hboot is 1.36
cmd doesnt recognise any of those, I don't understand do I have to change the directory to my phone or something?
Click to expand...
Click to collapse
Open cmd from fastboot folder : shift+right click > open command

davidk-il said:
Open cmd from fastboot folder : shift+right click > open command
Click to expand...
Click to collapse
ok thanks. Now when I enter 'fastboot flash boot boot.img' it says error cannot load boot.img

problem solved thanks a lot guys! I just had to erase cache

Vulbastick said:
problem solved thanks a lot guys! I just had to erase cache
Click to expand...
Click to collapse

[Q] Htc one X stuck at HTC quietly brillant HELP?

Hey i tried to recover my backup but if i start my phone it is stuck at the htc logo,
Please help?

Flash the boot.img of the backup. /sdcard/clockworkmod/backups/xxxxxx/boot.img

TToivanen said:
Flash the boot.img of the backup. /sdcard/clockworkmod/backups/xxxxxx/boot.img
Click to expand...
Click to collapse
Ehm, how do I acces my phone on my pc because i can't see my htc one x on my pc?
Sry imma noob..

Hook usb cable > recovery > mounts and storage > mount usb storage

TToivanen said:
Hook usb cable > recovery > mounts and storage > mount usb storage
Click to expand...
Click to collapse
I did restore and then boot, that didn't work.
But i tried it and it says: E:Unable to open ums lunfile (no such file or directory)
Thanks for the quick response

Your CWM is outdated. Download a new version: http://download2.clockworkmod.com/recoveries/recovery-clockwork-touch-5.8.4.0-endeavoru.img
Put it to your fastboot folder and rename it 'recovery'. Boot the phone to fastboot mode. Flash by typing to fastboot cmd window:
fastboot flash recovery recovery.img
fastboot erase cache

TToivanen said:
Your CWM is outdated. Download a new version:
Put it to your fastboot folder and rename it 'recovery'. Boot the phone to fastboot mode. Flash by typing to fastboot cmd window:
fastboot flash recovery
fastboot erase cache
Click to expand...
Click to collapse
Ooohh thank you soo much!! D
I love you! (no homo)

You're welcome!! Is everything fine now?

TToivanen said:
You're welcome!! Is everything fine now?
Click to expand...
Click to collapse
Yep everything is working again Thanks again!

NP. All the best
Sent from my IceCold One X

[Q] Flashed boot.img now looping splash screen

Hello,
I've been running ARHD ICS for a while now so decided to upgrade to ARHD JB tonight. Flashed HBOOT and boot.img fine, however for some reason after flashing boot.img my phone tried to reboot. Reaches the white HTC splash screen (with the green HTC logo) and doesnt go any further.
When I try to reboot back into recovery, nothing happens it just gets stuck at the splash screen again!
Any ideas? I assume this is because I'm running JB firmware and a ICS rom at the minute, so I just need to get back into recovery to flash the JB ROM.
Any help would be appreciated

Whats your hboot version ? did you ever updated the phone to JB ?
do :
fastboot getvar version-main
and post the result here please

Mr Hofs said:
Whats your hboot version ? did you ever updated the phone to JB ?
do :
fastboot getvar version-main
and post the result here please
Click to expand...
Click to collapse
version-main: 1.29.061.11
I've managed to flash ARHD 21. However still the same thing happens. Reboot gets stuck at the splash screen.

jayc89 said:
version-main: 1.29.061.11
I've managed to flash ARHD 21. However still the same thing happens. Reboot gets stuck at the splash screen.
Click to expand...
Click to collapse
yeah you need to update the hboot first in order to run JB....none of them will run.
i will get you a ruu to get back to full stock, then you can update to ICS 404 and then to JB 3.14

Mr Hofs said:
yeah you need to update the hboot first in order to run JB....none of them will run.
i will get you a ruu to get back to full stock, then you can update to ICS 404 and then to JB 3.14
Click to expand...
Click to collapse
Hmmm, strange. In fastboot, HBOOT says it's at version 1.36.0000
I flashed it from Mike's thread here; http://forum.xda-developers.com/showthread.php?t=1957376
My CIDNUM is ORANG001

oke what commands did you use ?
Try this :
fastboot erase cache (and try to enter the recovery)
did you made a full wipe before installing the new rom ?
and this is the command for flashing the boot.img :
fastboot flash boot boot.img (not fastboot boot boot.img, that will indeed reboot the phone)

Mr Hofs said:
oke what commands did you use ?
Try this :
fastboot erase cache (and try to enter the recovery)
did you made a full wipe before installing the new rom ?
and this is the command for flashing the boot.img :
fastboot flash boot boot.img (not fastboot boot boot.img, that will indeed reboot the phone)
Click to expand...
Click to collapse
erase cache got me into recovery but still doesnt pass the white screen when I reboot.
fastboot oem lock
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot reboot
fastboot oem get_identifer_token
fastboot flash unlocktocken Unlock_code.bin
fastboot flash recovery recovery-clockwork-touch-5.8.3.1-endeavoru.img
fastboot erase cache
fastboot reboot
*Flashed ARHD 21 from CWM*

jayc89 said:
erase cache got me into recovery but still doesnt pass the white screen when I reboot.
fastboot oem lock
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot reboot
fastboot oem get_identifer_token
fastboot flash unlocktocken Unlock_code.bin
fastboot flash recovery recovery-clockwork-touch-5.8.3.1-endeavoru.img
fastboot erase cache
fastboot reboot
*Flashed ARHD 21 from CWM*
Click to expand...
Click to collapse
C:\Android\android-sdk\platform-tools>fastboot flash boot boot.img
sending 'boot' (4982 KB)...
FAILED (command write failed (Unknown error))
finished. total time: 0.648s

jayc89 said:
erase cache got me into recovery but still doesnt pass the white screen when I reboot.
fastboot oem lock
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot reboot
fastboot oem get_identifer_token
fastboot flash unlocktocken Unlock_code.bin
fastboot flash recovery recovery-clockwork-touch-5.8.3.1-endeavoru.img
fastboot erase cache
fastboot reboot
*Flashed ARHD 21 from CWM*
Click to expand...
Click to collapse
EDIT : UNLOCK the bootloader first !
first flash a new recovery, yours is old. https://www.dropbox.com/s/qsurumd3gs0vkar/Philz recovery 5.3.0.img
then flash the boot.img from the ARHD rom
fastboot erase cache
fastboot flash boot boot.img
fastboot erase cache
then make a full wipe in the recovery
Factory reset
wipe cache partition
advanced - wipe dalvik cache
mounts and storage - format cache, data, system
then install the new rom !

Thanks for that, I've managed to boot into the new ROM, however I dont have any signal now. I've gone to select the operator manually and Orange isnt available. My SIM works fine in another phone.

jayc89 said:
Thanks for that, I've managed to boot into the new ROM, however I dont have any signal now. I've gone to select the operator manually and Orange isnt available. My SIM works fine in another phone.
Click to expand...
Click to collapse
Did you actually flash the boot.img that is inside the ARHD rom.zip ? If not, do so !

Mr Hofs said:
Did you actually flash the boot.img that is inside the ARHD rom.zip ? If not, do so !
Click to expand...
Click to collapse
Yes I have.

well i could say , try a different rom .....just to test. otherwise reflash the firmware again all over. fastboot getvar version-main should also give a 3.14 number !

I reflashed the boot.img again after flashing the ARHD ROM and it looks to be working now. Thanks for all your help!

jayc89 said:
I reflashed the boot.img again after flashing the ARHD ROM and it looks to be working now. Thanks for all your help!
Click to expand...
Click to collapse
Ah nice ! Very good :thumbup:
CASE CLOSED !

Mr Hofs said:
Ah nice ! Very good :thumbup:
CASE CLOSED !
Click to expand...
Click to collapse
Wow! I just had the same problem! But it is solved now thanks to your excellent help! :laugh:

well thanks tosti ! hahah nice name
Your case is CLOSED TOO !

[Q] Stuck on Recovery / bootloader (Mac OS)

Hello everyone,
I have a an international HTC One X.
I rooted it yesterday and tried to load a 4.4.2 rom but I got a Status7 message.
Now I am stuck on Recovery (clockworkmod) and I can't access my phone.
I tried adb but the phone is not listed in the devices. Fixing this would be a good start.
Accessing it through USB to load a zip file in the internal memory for a start would be more than enough to fix it.
But how can I do this? Need to say that I also have a Mac!
Thank you so much in advance!

Flash philz 5.15 and mount the sdcard and wait literally a minute or 2.....it will pop up eventually.

Mr Hofs said:
Flash philz 5.15 and mount the sdcard and wait literally a minute or 2.....it will pop up eventually.
Click to expand...
Click to collapse
Thank you so much for your response!!
How can I flash philz 5.15 if I can't access my phone?
The device is not listed in adb

Put the phone in the bootloader/Fastboot usb mode and flash the recovery via Fastboot command. Adb doesn't work in the bootloader, only Fastboot commands do

Mr Hofs said:
Put the phone in the bootloader/Fastboot usb mode and flash the recovery via Fastboot command. Adb doesn't work in the bootloader, only Fastboot commands do
Click to expand...
Click to collapse
Thank you so much for this...!!!!!!!!
I'm trying it now... can you tell me the command? is it push again??

It's like how you flashed your first custom recovery, something in line with :
Fastboot flash recovery recovery.img (recovery.img = the name of the file)
https://www.dropbox.com/s/qp21ubo10xetcvn/Philz recovery 5.15.9.img

Mr Hofs said:
Put the phone in the bootloader/Fastboot usb mode and flash the recovery via Fastboot command. Adb doesn't work in the bootloader, only Fastboot commands do
Click to expand...
Click to collapse
woohoo
./fastboot-mac devices
seems it working...
trying...

Mr Hofs said:
It's like how you flashed your first custom recovery, something in line with :
Fastboot flash recovery recovery.img (recovery.img = the name of the file)
You're a star... it worked...
/fastboot-mac flash recovery recovery.img
sending 'recovery' (8050 KB)...
OKAY [ 1.039s]
writing 'recovery'...
(bootloader) Format partition SOS done
OKAY [ 0.657s]
finished. total time: 1.696s
now I have a new recovery... now what...???
THANK YOU!!!
Click to expand...
Click to collapse

Enter it and mount the sdcard in the mount and storage menu as a usb mass storage device .....Then wait. Copy the rom you want (any non kitkat) and make a full wipe and install the rom. Reboot back to the bootloader and flash the boot.img from that rom
/fastboot-mac flash boot boot.img
And then reboot.

so if I get things right I should use:
/fastboot-mac flash boot boot.img
/fastboot-mac erase cache
to push the new rom in... right?

Mr Hofs said:
Enter it and mount the sdcard in the mount and storage menu as a usb mass storage device .....Then wait. Copy the rom you want (any non kitkat) and make a full wipe and install the rom. Reboot back to the bootloader and flash the boot.img from that rom
/fastboot-mac flash boot boot.img
And then reboot.
Click to expand...
Click to collapse
wow... it's mounted...!!!!!!!!!!!!!
Can I use a kitkat one? like the slimkat?

saggel said:
wow... it's mounted...!!!!!!!!!!!!!
Can I use a kitkat one? like the slimkat?
Click to expand...
Click to collapse
if not... give a link of what's best to use please...!!!!!

You can use kitkat roms but you need a different recovery for that.
1: copy the desired rom to the sdcard and change the recovery. Make a full wipe and install the rom, flash the boot.img via Fastboot and reboot
2: flash any NON kitkat rom. Make a full wipe, install the rom and flash the boot.img via fastboot

Mr Hofs said:
You can use kitkat roms but you need a different recovery for that.
1: copy the desired rom to the sdcard and change the recovery. Make a full wipe and install the rom, flash the boot.img via Fastboot and reboot
2: flash any NON kitkat rom. Make a full wipe, install the rom and flash the boot.img via fastboot
Click to expand...
Click to collapse
My phone works again and I used the beanstalk 4.4.2
THANK YOU SO MUCH!
Now if you can tell me what's the 4.4.2 rom I can put on my phone and forget about flashing it for the next 3-4 months would be great

Cant tell which one, there is no such thing as a best rom. All roms has different options and features that a user needs or not.
But good it works again !