ZTE (AT&T) Avail 2 [Z992] - Upgrading, Modifying and Unlocking

Looking for any information anyone may have for rooting this device.
Android 4.1.1 JellyBean. I've tried motochopper, previous avail methods and a few other JB specific attemps. All of which have failed, fortunately, I'm not-yet bricked.
Motochopper fails at executing the binary /data/local/tmp/pwn, giving a bus error -after- the script stops on a signal.
Code:
[email protected]:/ $ /data/local/tmp/pwn
/data/local/tmp/pwn
[+] This may take a few minutes.
[1] + Stopped (signal) /data/local/tmp/pwn
[email protected]:/ $ exit
exit
[1] + Bus error /data/local/tmp/pwn

I am on board with this as well
misternad said:
Looking for any information anyone may have for rooting this device.
Android 4.1.1 JellyBean. I've tried motochopper, previous avail methods and a few other JB specific attemps. All of which have failed, fortunately, I'm not-yet bricked.
Motochopper fails at executing the binary /data/local/tmp/pwn, giving a bus error -after- the script stops on a signal.
Code:
[email protected]:/ $ /data/local/tmp/pwn
/data/local/tmp/pwn
[+] This may take a few minutes.
[1] + Stopped (signal) /data/local/tmp/pwn
[email protected]:/ $ exit
exit
[1] + Bus error /data/local/tmp/pwn
Click to expand...
Click to collapse
**BUMP** on this. This is an inexpensive decent Android phone. The camera is the only drawback but everything else is fairly decent. I am going to start looking into this, because being able to root and mod a cheap phone to have as a ready back up is essential.

xCAVEMANx said:
**BUMP** on this. This is an inexpensive decent Android phone. The camera is the only drawback but everything else is fairly decent. I am going to start looking into this, because being able to root and mod a cheap phone to have as a ready back up is essential.
Click to expand...
Click to collapse
Cydia Impactor. It's a one-click master-key exploit.

Wow... I can't believe this is the first time I'm hearing of this. Does the trick and then some. Looks like it's time to learn how to port since nobody seems to be taking the reigns on this one. Wish me luck!!!
Sent from my ASUS Transformer Pad TF300T using xda app-developers app

Can anyone tell me where to find stock rom for avail 2 and how to flash it...
I rooted the phone but changing font made phone un-bootable...
I was wondering how to recover it ... I can access FTE mode and stock recovery but no ADB....
So far i had no luck finding stock firmware or any means on how to flash the phone

Bought this great little phone as backup to my attic which I will never part with. Have found that it is wonderful for the price. I don't use camera on any phone so that's never an issue. This phone is a quiet little secret. But impaired as more are sold its secrets will be released.
Sent from my Z992 using xda app-developers app

misternad said:
Looking for any information anyone may have for rooting this device.
Android 4.1.1 JellyBean. I've tried motochopper, previous avail methods and a few other JB specific attemps. All of which have failed, fortunately, I'm not-yet bricked.
Motochopper fails at executing the binary /data/local/tmp/pwn, giving a bus error -after- the script stops on a signal.
Code:
[email protected]:/ $ /data/local/tmp/pwn
/data/local/tmp/pwn
[+] This may take a few minutes.
[1] + Stopped (signal) /data/local/tmp/pwn
[email protected]:/ $ exit
exit
[1] + Bus error /data/local/tmp/pwn
Click to expand...
Click to collapse
I used Cydia Impactor. I took me 5 minutes.-

ceciliasp said:
I used Cydia Impactor. I took me 5 minutes.-
Click to expand...
Click to collapse
How by using Cydia Impactor helped you root the Z992? I have it as well, but have no idea how to root from start to finish in DOS(?) Then, after that, Is there a basic custom ROM that is easily attainable for use with detailed instructions?
I am fairly new to all this but been trying for about 2 years. I just never knew how to add a custom ROM or have a reliable RECOVERY after rooting, I am still unsure why I try to begin with, I guess to have a cooler phone, but its complicated, I read the threads, and there are so many terms not being throughly put to instruction decriptions. Bare with me, I am very articulate....
Can someone help me understand, even with some links to basic knowledge and full detail on what rooting, roming, and recoverying or maybe even unlocking a phone - Z992 to be in particular at the moment. thanks - helping words help others learn. Peace til next time..

Anyone know of any other rom besides the z993 for this budget phone?
Sent from my Z992

reply to guidance
niteridet said:
How by using Cydia Impactor helped you root the Z992? I have it as well, but have no idea how to root from start to finish in DOS(?) Then, after that, Is there a basic custom ROM that is easily attainable for use with detailed instructions?
I am fairly new to all this but been trying for about 2 years. I just never knew how to add a custom ROM or have a reliable RECOVERY after rooting, I am still unsure why I try to begin with, I guess to have a cooler phone, but its complicated, I read the threads, and there are so many terms not being throughly put to instruction decriptions. Bare with me, I am very articulate....
Can someone help me understand, even with some links to basic knowledge and full detail on what rooting, roming, and recoverying or maybe even unlocking a phone - Z992 to be in particular at the moment. thanks - helping words help others learn. Peace til next time..
Click to expand...
Click to collapse
THIS IS FOR WINDOWS AS I ONLY USE WINDOWS.
Cydia impactor works like a charm I have had success in rooting my z992, my fiance's z992 and my alps momo 9 3G tablet (Chinese tablet). Details on how to root using Cudi's impactor:
Download cydia impactor (just google it)
Enable USB debugging and connect to PC as media device
Plug in phone now on and unlocked
Open cydia impactor (it should say "# Drop SU.... ")
Press start or go
Wait for it to go back to where it says "# Drop SU...."
Unplug your phone (no longer need pc)
Then download superuser
Open app and scroll left to right and update su binary by clicking where it says SUPERSU 1.6.1... THEN CLICK update
Download busybox by stericson
Open busybox click install at bottom left
After completion manage apps in your phones settings menu and delete busybox. You now have root access! Enjoy.
Information on rooting, unlocking, roming, and recovering... :
Rooting will give you access to system files and functions that basic users cannot access. Like deleting apps that came preinstalled with the phone and take up a bunch of space.
Unlocking: allows you to use a different carriers service on your phone for example using straight talk in att or T-Mobile phones using their byop program sum card service.
Roming: means you can install a different Android based operating system on your phone. For example Android 2.3.4 of a att Samsung galaxy s2 on your phone instead of Android 4.1.1 or Android 4.1.2 on att avail 2.
Recovery means you have access to install any type of zip file to your phone through clockworkmod, twrp, or cynagen mod recovery to make system changes on your phone.
Did I answer all of your questions or do you need more understanding of the terms? Glad to help you!!!
---------- Post added at 09:44 PM ---------- Previous post was at 09:40 PM ----------
godkillerz223 said:
Anyone know of any other rom besides the z993 for this budget phone?
Sent from my Z992
Click to expand...
Click to collapse
There is not another rom that works on this phone because ZTE put a block on the system CPU and I recommend not trying to find another rom as you will most likely end up not having a working phone

i did all of this with no errors and everything on my phone is still normal. all i really need is the network unlock code but im sure of how to get it without waiting on at&t for 3-5 days. god i hope im in the right thread.

unlocking z992
automatic_bazooti said:
i did all of this with no errors and everything on my phone is still normal. all i really need is the network unlock code but im sure of how to get it without waiting on at&t for 3-5 days. god i hope im in the right thread.
Click to expand...
Click to collapse
there is only one way of unlocking this device and unfortunately that is to call att or use the device unlock portal on their website...neither of them helped me because we are required to wait for 6 months after purchasing this device...and for this phone the manufacturer and att have a strict agreement not to allow an unlock of this phone weather you call att or use the website it will give you the same error: "The information provided does not match the information on the account." if you do manage to get it unlocked please make another post as i need mine unlocked also. i have 2 of these that need to be unlocked. I WOULD BE MORE THAN WILLING TO PM YOU MY IMEI CODES TO HAVE THEM UNLOCKED!
---------- Post added at 11:04 PM ---------- Previous post was at 10:43 PM ----------
Hi, I am using this phone until I get my Blu Dash 4.5 back from repair. It is still locked to at&t and I am using it on Straight Talk with all updated apn settings. Does anyone know if there is a way to tether the data to other phones and/or computers? This would be really helpful. I am fully rooted but i do not have a custom recovery installed as it will not allow me to view/edit my files on my pc via data cable and that is something I need. Also if someone has a custom recovery (i.e.: cwm, twrp, cm...) that works flawlessly with this phone (at least allow me to connect to pc) or knows where i can get one it would be greatly appreciated. Thanks in advance for any help.

wirless tether working
George19 said:
there is only one way of unlocking this device and unfortunately that is to call att or use the device unlock portal on their website...neither of them helped me because we are required to wait for 6 months after purchasing this device...and for this phone the manufacturer and att have a strict agreement not to allow an unlock of this phone weather you call att or use the website it will give you the same error: "The information provided does not match the information on the account." if you do manage to get it unlocked please make another post as i need mine unlocked also. i have 2 of these that need to be unlocked. I WOULD BE MORE THAN WILLING TO PM YOU MY IMEI CODES TO HAVE THEM UNLOCKED!
---------- Post added at 11:04 PM ---------- Previous post was at 10:43 PM ----------
Hi, I am using this phone until I get my Blu Dash 4.5 back from repair. It is still locked to at&t and I am using it on Straight Talk with all updated apn settings. Does anyone know if there is a way to tether the data to other phones and/or computers? This would be really helpful. I am fully rooted but i do not have a custom recovery installed as it will not allow me to view/edit my files on my pc via data cable and that is something I need. Also if someone has a custom recovery (i.e.: cwm, twrp, cm...) that works flawlessly with this phone (at least allow me to connect to pc) or knows where i can get one it would be greatly appreciated. Thanks in advance for any help.
Click to expand...
Click to collapse
I got it to work with "WiFi Tether For Root Users"
Its free on the play store
by Müller, Lemons, Buxton Corporation
In WiFi Settings
Set "Change Device-Profile" to Gerneric ICS/JB(wlan0)
Set "Change Setup-Method" to Netd-Ndc(master)
Scroll down to LAN Settings
Enable MSS clamping
and
Enable Routing fix
That will enable tethering to work.

unlock tethering
hgrinn37 said:
I got it to work with "WiFi Tether For Root Users"
Its free on the play store
by Müller, Lemons, Buxton Corporation
In WiFi Settings
Set "Change Device-Profile" to Gerneric ICS/JB(wlan0)
Set "Change Setup-Method" to Netd-Ndc(master)
Scroll down to LAN Settings
Enable MSS clamping
and
Enable Routing fix
That will enable tethering to work.
Click to expand...
Click to collapse
Could you by chance get me the link to the play store please? It didn't show up...
edit i found one that works although it is 1.95 on the play store "WiFi Tether Router"
I found the one you posted but i could not get it to work correctly with the settings you provided. i used those settings to start tethering but i cannot see the ap on my pc or tablet....PLEASE HELP!!!

tethering
there has to be an easier way to tether or unlock this phone!!!!
ANY THOUGHTS????

George19 said:
there has to be an easier way to tether or unlock this phone!!!!
ANY THOUGHTS????
Click to expand...
Click to collapse
I used frame root and busy box on rails and https://code.google.com/p/android-wifi-tether/ follow this link for an apk for a WiFi for your phone that works perfectly once you put your settings in the app..I used this on a 992 and a 993..use the apk frame root and try each exploit..you cant screw up the phone with this and you'll keep your stock recovery and rom ..I've had no bugs at all doing it this way.I also needed no unlock codes..
Sent from my Z993 using XDA Free mobile app

nexusbandit said:
I used frame root and busy box on rails and ... follow this link for an apk for a WiFi for your phone that works perfectly once you put your settings in the app..I used this on a 992 and a 993..use the apk frame root and try each exploit..you cant screw up the phone with this and you'll keep your stock recovery and rom ..I've had no bugs at all doing it this way.I also needed no unlock codes..
Sent from my Z993 using XDA Free mobile app
Click to expand...
Click to collapse
Are you saying you've been able to network unlock your phone... without contacting ATT?

wallizzle said:
Are you saying you've been able to network unlock your phone... without contacting ATT?
Click to expand...
Click to collapse
I have needed nothing from ATT to do the WiFi tether..I run my laptop off my phone all the time..I never needed any network codes from ATT..you should only need a code if you wish to trade carriers..
Sent from my Z993 using XDA Free mobile app

nexusbandit said:
I have needed nothing from ATT to do the WiFi tether..I run my laptop off my phone all the time..I never needed any network codes from ATT..you should only need a code if you wish to trade carriers..
Sent from my Z993 using XDA Free mobile app
Click to expand...
Click to collapse
I am now using my 992 and 993 on the new cricket/aio network and no codes were needed..aio is ATT..ATT told me I don't need an unlock code as long as I use an ATT sim..they were right.I tried the sim from my 993 in an old Motorola matrix 2 from ATT and it works with no code needed..
Sent from my MB865 using XDA Free mobile app

Well now we have the TowelRoot apk. Anyone try that yet?
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app

Related

[Root/Unlock] LG Optimus F6 T-Mobile

Hello users I have recently bought a new T-Mobile LG Optimus F6.
For those of you who may have just purchased one or need one rooted and or unlocked here is how to do it.
Root:
Download MotoChopper.zip that is attatched at the bottom.
Then place your phone in Debugging mode. Also check unknown sources in security.
Unzip the MotoChopper and look for "run.bat"
Once that is all done you should have root access.
Unlock:
I use Blowfish Unlocks. You can use who ever you prefer.
Dial *#06# and that will be your IMEI number.
Next submit for the code and wait.
When it comes back use: SIM_UNLOCK=00000000000000
Now to enter the code you have to put in a non supported sim and dial 2945#*500#
Then choose Network Unlock and enter your code. If the first code doesnt work do not panic.
You have 10 attempts and you usually get back 5 different codes. Try them until one works. But to be sure double check that you submitted the right IMEI to begin with.
Enjoy
works
Although lacking some instruction. You must have lg support software on PC and drivers installed (Google)
redndeyes said:
Although lacking some instruction. You must have lg support software on PC and drivers installed (Google)
Click to expand...
Click to collapse
Correct... here is the link: http://forum.xda-developers.com/showthread.php?t=2210213
What I did after root: Uninstalled all the bloatware... added beats audio, and wifi tether...
Pretty cool phone... I sure do miss my HTC one S
I already sold mine but it was very good. The battery life on it was great. But I moved on to the Note 2 Tmo and hopefully I can sell the Note 2 and get the Note 3
Sent from my SGH-T889 using XDA Premium 4 mobile app
Question about the rooting
Is the rooting all that is needed to enable tethering without the paying of an additional fee to T-Mobile? Basically being held hostage....... and will the phone be capable of OS updating in the future?
Dave
roketteere said:
Hello users I have recently bought a new T-Mobile LG Optimus F6.
For those of you who may have just purchased one or need one rooted and or unlocked here is how to do it.
Root:
Download MotoChopper.zip that is attatched at the bottom.
Then place your phone in Debugging mode. Also check unknown sources in security.
Unzip the MotoChopper and look for "run.bat"
Once that is all done you should have root access.
Unlock:
I use Blowfish Unlocks. You can use who ever you prefer.
Dial *#06# and that will be your IMEI number.
Next submit for the code and wait.
When it comes back use: SIM_UNLOCK=00000000000000
Now to enter the code you have to put in a non supported sim and dial 2945#*500#
Then choose Network Unlock and enter your code. If the first code doesnt work do not panic.
You have 10 attempts and you usually get back 5 different codes. Try them until one works. But to be sure double check that you submitted the right IMEI to begin with.
Enjoy
Click to expand...
Click to collapse
we need a development thread started
See this post request as i have done....
http://forum.xda-developers.com/showthread.php?p=46105044&posted=1#post46105044
linnon said:
See this post request as i have done....
http://forum.xda-developers.com/showthread.php?p=46105044&posted=1#post46105044
Click to expand...
Click to collapse
There is a forum for this device over at this site http://androidforums.com/lg-optimus-f6/
XDA will never happen for this device cause It's not as popular as other device.
How did you guys get Wi-Fi tether to work? Can't get it working after root
Did u wipe after the root to see if it works?
Sent from my SM-N900T using XDA Premium 4 mobile app
LG F6 MetroPCS
Will MotoChopper work on the MetroPCS LG F6?
How to Un-root
redndeyes said:
Although lacking some instruction. You must have lg support software on PC and drivers installed (Google)
Click to expand...
Click to collapse
Do you or anyone know how to un-root the phone aftter running the motochopper? I've been looking everyone on the web and cannot find this. I'm worried in case there is ever a hardware issue that we need to unroot to get serviced.
Blarg3891 said:
Do you or anyone know how to un-root the phone aftter running the motochopper? I've been looking everyone on the web and cannot find this. I'm worried in case there is ever a hardware issue that we need to unroot to get serviced.
Click to expand...
Click to collapse
I just did a factory reset and that removed root
cdusa said:
Will MotoChopper work on the MetroPCS LG F6?
Click to expand...
Click to collapse
No. Not at all
Sent from my LGMS500 using XDA Premium 4 mobile app
what's the difference T-mobile v MetroPCS
Metro sold me the F6 based on the fact it works on the T-mobile networks LTE. However, I am having a hard time living with an unrooted phone so I'm hoping to use motochopper to root. But someone said it will not work. Is there really that much difference between those sold by T-mobile and those from Metro?
I "upgraded" from a Motion to have bigger screen, and now I find out that may have actually been a step down? WTF!?
All I want to do is unbloat and get rid of "insufficient storage" errors. Shouldn't be so tedious!
dirtycar74 said:
...
All I want to do is unbloat and get rid of "insufficient storage" errors. Shouldn't be so tedious!
Click to expand...
Click to collapse
You can root with the vroot method.
There's some questions about what it does exactly but it does work. I should point out that the program and its cousin program are under community investigation due to possibly shady dealings with pulling and pushing files. Its cousin program (kango or something) Has been shown to pull imeid off phones and apparently send them, unencrypted, to a Chinese server.... but it's the only thing I've found to be a proven working root.
Can't unlock boot loader so no custom roms but you can debloat.
I've discovered that both my l9 and my f6 hold onto the storage allotment for moved downloads...
Not sure if you get my drift...
If you download a file to internal and move it to sd it still shows up in "downloads" when you check the storage in your settings.
To solve it open settings/storage/unmount sd and then open downloads under internal storage and delete files you know you moved.
Sent from my LGMS500 using XDA Premium 4 mobile app
With this "vroot", would it be safe to root while disconnected from networks to prevent unauthorized sharing of imei?
I thought of trying that myself but never got around to it.
Sent from my LGMS500 using XDA Premium 4 mobile app
I think cydia impactor might work too. Has anyone tried it? I can't get my hands on an unrooted f6 to give it a shot
Sent from my LGMS500 using xda app-developers app
I am on metropcs an want root too! I will try cydia if it works? cant wait for it to get a lil more exposure an get a rom!
lokipimpin said:
I am on metropcs an want root too! I will try cydia if it works? cant wait for it to get a lil more exposure an get a rom!
Click to expand...
Click to collapse
I know that vroot works. I've been told cydia works. You need to manually install superuser though
Sent from my LGMS500 using Tapatalk

[ROOT] Very Simple E980 root after E98010p update

This is so awesome but I can't post links so....
...wait for it!!!
I can post it on my own web site tho: free-press dot us
I copied this from your site.
How To ROOT the Optimus G Pro E-980
after installing the latest update to E98010p
1. Install the drivers if you have not done so yet from http://www.lg.com/us/support-mobile/lg-E980 (under Software Update tab)
2. Install this program (Kingo Android Root) from download.com: http://download.cnet.com/Kingo-Android-Root/3000-2094_4-75996768.html
Notes: You get a download.com installer initially. I was offered two programs I would never use so I declined those and got the actual program from the installer. Nothing was forced so don't freak out. The actual program is 22.5mb.
3. Open the Kingo program after install.
4. Put your phone in USB Debugger mode and connect it to your PC.
5. Select "Install PC Software" on your phone popup and let the Kingo program do its job.
6. The program will attempt root in Odin mode at first and fail and will then automatically use the correct mode and succeed.
Once the program completes you will have rooted your LG Optimus G Pro with "SuperSU" installed. Very simple. Next step is to install a Recovery.
I tried to post this on XDA but I don't have 10 posts so I gave up there. I go there often for solutions and new information but rarely post, but people seemed to be struggling with this and I thought I should give something back. Someone with link posting power can repost this to the forum if you want but please give me some credit for finding this on YouTube. Thanks!!!
Sent from my LG-E980 using xda app-developers app
really it was so simple
I just installed it and the program worked as promised, thanks man
Worked for me, now trying it on my Nexus 7 (Flo) ...:good:
**Update**
Nope on the Nexus
I'm gonna take a stab at this and say Freegee will still be required for installing recovery(CWM)?
cougar214 said:
I'm gonna take a stab at this and say Freegee will still be required for installing recovery(CWM)?
Click to expand...
Click to collapse
FreeGee will put the lokified version of the recovery on your phone, which is needed since the bootloader is still locked
Can you tell me, or anyone can tell me, why Rom Manager doesn't work? It says it has Loki support but when I try to use it I get the android with the red symbol denoting it can't boot into recovery. I'm just curious.
cougar214 said:
Can you tell me, or anyone can tell me, why Rom Manager doesn't work? It says it has Loki support but when I try to use it I get the android with the red symbol denoting it can't boot into recovery. I'm just curious.
Click to expand...
Click to collapse
Not sure....
I've read that Kingo and vroot are malicious root programs that might be sending IMEI info to Chinese servers. Then, supposedly other phones can be set up with your credentials. I don't have any way to verify if the aforementioned is true, but I'm just passing it along...
Maybe a web search of vroot and Kingo are in order.....
If that is true, and I'm not saying it is or isn't, I'm sure a web search on the matter could tell you what to look for. Such as hidden malicious apps installed, etc. It would be a prudent move to check into it but nothing to panic over until and/or unless there is some truth to it. Just my 2 cents on the matter....lol
---------- Post added at 02:27 PM ---------- Previous post was at 02:02 PM ----------
Just because you brought it up Andy, I went into all my settings and apps. This method DOES install an app in your phone. I probably should have wrote down the app info before I removed it but I forgot to. it's not rocket science to figure it out on your own though. You see a blue icon with some Chinese writing on it. I went ahead and removed it from my phone just to be safe. But chances are IF this app is sending ANY data to a foreign server, it has done so already because it's been in my phone for a few hours already before I noticed it.
I did read online about the uploading of IMEI numbers but ONLY to build a database from but that feature has since been removed because of the concerns it raised.
Worked fine for my LG Optimus G Pro E980. I also ran Malware Bytes afterwards and found no malware, then I ran CM Security and the only thing I found was an sms fake phishing vulnerability which I am almost sure didn't come from the root process.
So just want to verify on this software is working for E980 10p update? Has anyone else found 10p root method to work without reflashing.? I am almost tempt to hold out on 4.4 OTA update coming for my phone.
Sent from my LG-E980 using XDA Free mobile app
Doesnt get any easier then kingo lol
2SHAYNEZ
I know that but is it going to work for my E980 I checked out the site and the E980 isn't listed as a phone on its list I'll try it out.
Sent from my LG-E980 using XDA Free mobile app
Deweywiii said:
I know that but is it going to work for my E980 I checked out the site and the E980 isn't listed as a phone on its list I'll try it out.
Sent from my LG-E980 using XDA Free mobile app
Click to expand...
Click to collapse
Lol yes that's what this thread is stating already......I used it took 10 mins to do everything
2SHAYNEZ
shayneflashindaily said:
Lol yes that's what this thread is stating already......I used it took 10 mins to do everything
2SHAYNEZ
Click to expand...
Click to collapse
Alright cool im doing it now. so is freegee working for the bypass of bootloader?
Deweywiii said:
Alright cool im doing it now. so is freegee working for the bypass of bootloader?
Click to expand...
Click to collapse
Yeah freegee bypasses and allows you to install cwm that has lokified built in
2SHAYNEZ
shayneflashindaily said:
Yeah freegee bypasses and allows you to install cwm that has lokified built in
2SHAYNEZ
Click to expand...
Click to collapse
Ok i have rooted and i have also used freegee. now i just need to back it up and get some roms and have a little fun.
Deweywiii said:
Ok i have rooted and i have also used freegee. now i just need to back it up and get some roms and have a little fun.
Click to expand...
Click to collapse
Make sure you read op of each ROM ....installation guides.....good luck
Sent from my C811 4G using xda app-developers app
Any Linux based scripts to get this phone rooted? I don't own a windows PC.

[ROOT] New Root method & BL Unlock for 5.0.x!!! OTA Supported!!!

Hey all,
For starters, disclaimer:
I am not responsible for thermonuclear war, bricks, and or your parents grounding you for said brick.
This method is VERY finicky, and very hard to reproduce. I cannot promise anything. It worked for me.
You need to download the following apks:
- KingRoot (Newest available on kingroot.net)
- KingUser (Newest available on kingroot.net)
- SunShine (3.0+, available @ theroot.ninja)
Once you have downloaded all of these apk files, follow the below steps:
1. Go to Settings ==> Security ==> Check "Allow Installation of Apps from Unknown Sources" and agree to the prompt.
2. Go to Settings ==> About ==> Software Info ==> Tap "Build Number" 12 Times.
3. Go to Settings ==> Developer Options ==> Check "USB Debugging"
4. Now install all the APK files by clicking on them.
5. Ensure you are connected to a reliable WiFI network.
6. Ensure you have Location Services/GPS and High Accuracy turned on in Settings.
7. Open KingRoot and select "Try to Root" when prompted.
8. Now, wait for it to complete. We don't expect KingRoot to succeed! We only expect it to display a prompt and then fail! If it reboots, you need to reopen KingRoot and try again.
Keep closing (through your Recent Apps Menu) and re-opening/re-running KingRoot until you get a prompt that says "Google cannot verify this app, would you like to Install KingUser?" click "Install" any similar message will work, i.e. "Google recommends you not install this app, would you like to install KingUser?" but a similar message must display, if it doesn't display, re-run KingRoot.
9. After the message goes away, and KingRoot fails, close the app, and open KingUser.
10 Verify that KingUser says you are rooted.
At this point, you are temp-rooted. You cannot write to the /System partition. You can only use apps that don't require /System access (very few).I recommend you cough up the $25 for SunShine. Only follow the instructions from here if you have $25 and want to unlock your boot loader, go S-OFF, and get Permanent Root & R/W /System Access.
11. Now, open SunShine and follow the on screen prompts, grant it SU access when prompted. It will reboot (Do not re-open SunShine as instructed after reboot!!!).
12. Repeat the steps 7-9 outlined above to re-gain temp-root.
13. NOW re-Open Sunshine and follow the on-screeen prompts.
Congrats! You are S-OFF, Unlocked, and your warranty bit returns an "OFFICIAL" status in bootloader mode. Now to install TWRP.
14. Download TWRP from here: http://android.cmphys.com/twrp-m7vzw/ ON YOUR PC/MAC/LINUX BOX
Make sure to use this and not the stock TWRP build! The stock TWRP build doesn't have full Lollipop encryption support (as of 5/29/15).
15. Reboot to bootloader with the volume buttons, or use ADB to reboot to bootloader.
16. Plug your phone into your PC and verify you see it when you run "fastboot devices" from CMD/Terminal.
17. Run "fastboot flash recovery /pathtotwrpimghere/nameoftwrpimg.img".
18. Run the volume buttons to select "Recovery".
19. Download the flashable SuperSU .zip for 2.46 and transfer it to your phone while in TWRP.
20. Install the SuperSU .zip from TWRP and reboot.
21. Uninstall KingUser.
You are rooted and S-OFF. Enjoy your ROMs/Kernels freely.
This method is highly finicky. It worked for me, and it can for you! it took me about an hour to get KingRoot to display the message asking to install KingUser. Just keep trying!
Good Luck!!!
Anyone else get this to work?
Sent from my Nexus 6 using XDA Free mobile app
I did get this to work. Previously stock lollipop and s-on locked hboot 1.61.
Now s-off unlocked 1.61 and stock lollipop.
I installed kingroot/king user. Got root. Ran sunshine...purchased it...sunshine rebooted phone.
On reboot clear data of kingroot/king user...uninstall and reinstall king root / king user. Get root again...finish sunshine.
Rebooted, unlocked! Rerun kingroot stuff for root. Install twrp from play store, ignore warnina have it install...works. Perm root now.
Sent from my Nexus 6 using XDA Free mobile app
i cant afford 25$ for sunshine :'( #3rdworldsproblems
Anyone having an issue installing kingroot? I was able to install once, but since then I continually get an error saying app not installed.
I thought Sunshine could S-Off LP on the Verizon HTC One already. No?
xdadevnube said:
I thought Sunshine could S-Off LP on the Verizon HTC One already. No?
Click to expand...
Click to collapse
No, it does not: everything before Loolypoop works with Sunshine.
nvm
This method works! Stock lolipop hboot 1.61. Thank you so much!
I got it to work! Verizon HTC One M7 5.0.2
In fact, all I had to do was download KingRoot and it actually successfully rooted my phone. I checked Root checker just in case and it says Root access is properly installed.
Austinh1517 said:
I got it to work! Verizon HTC One M7 5.0.2
In fact, all I had to do was download KingRoot and it actually successfully rooted my phone. I checked Root checker just in case and it says Root access is properly installed.
Click to expand...
Click to collapse
You won't have true write protection disabled until you turn s-off if you haven't already. Other wise apps you remove and settings you change with root will revert each time you reboot.
Sent from my HTC6535LVW using Tapatalk
dottat said:
You won't have true write protection disabled until you turn s-off if you haven't already. Other wise apps you remove and settings you change with root will revert each time you reboot.
Sent from my HTC6535LVW using Tapatalk
Click to expand...
Click to collapse
This is true. With these phones, root itself is almost moot. S=off is what I really want. Sure u can use titanium backup, but u CANT remove system apps, change boot animations, edit build.prop, etc... All because of.the built in write protection which u need s=off for... Ppl need to just bite the bullet and get sunshine. I got it the day it finally came out for us (back on 4.4.2) and been thankful for it every day since...
dottat said:
You won't have true write protection disabled until you turn s-off if you haven't already. Other wise apps you remove and settings you change with root will revert each time you reboot.
Sent from my HTC6535LVW using Tapatalk
Click to expand...
Click to collapse
Yeah I noticed that. I'll get Sunshine sooner or later
How many times did you guys have to run KingRoot? And do you run it to completion each time? I've run it at least 10 times on my device, it fails every time, and I have yet to see a prompt as described in the OP.
breaker911 said:
Anyone having an issue installing kingroot? I was able to install once, but since then I continually get an error saying app not installed.
Click to expand...
Click to collapse
Now I'm having this problem. I kept running kingroot, then it rebooted on me and told me I couldn't try to run it any more. So I uninstalled it thinking that would clear the problem. Now every time I try to install it it errors out and says "App not installed". I have no idea what to try next. Anyone have any hints?
dougleto said:
Now I'm having this problem. I kept running kingroot, then it rebooted on me and told me I couldn't try to run it any more. So I uninstalled it thinking that would clear the problem. Now every time I try to install it it errors out and says "App not installed". I have no idea what to try next. Anyone have any hints?
Click to expand...
Click to collapse
Always can ruu
Sent from my HTC6535LVW using Tapatalk
I'm not quite ready to nuke my entire phone just yet . Or is there a slightly less nuclear RUU option that I'm unaware of?
dottat said:
Always can ruu
So very sorry for my ignorance As I am going to get the cell phone craze and then the smartphone craze.
The last cell phone I owned took a team of mules to take the battery.
Please tell me what the term ruu means.
My interest is to completely or near completely "gut" my Verizon note 4 in my US Cellular note 4 and then be able to install single or multi boot systems, hopefully using modular Code
That would be either less than typical roms then I read about here or else very streamlined roms only data that would support the main operating system and whatever hardware is installed. I certainly wouldn't want to end up with S OFF and routed machines that I could then install stock or custom-written Apps, software firmware and Code whatever else kind I may desire. well I remain hopeful that many will tell me this is not a problem even so it's all tells me it is impossible I will remain confident of success As I am convinced tenacity is more powerful than all the smarts in the world as well as a good looks fast runners sweet talkers and even possibly the best Coders out there that may only lack that one trait named tenacity. if there's another post about this anymore please get me to that.
Thank you in advance we anticipated cooperation and kindness, I remain.
Charlie aka Gladhatter
Sent from my SM-N910V using XDA Free mobile app
Er
Click to expand...
Click to collapse
dougleto said:
I'm not quite ready to nuke my entire phone just yet . Or is there a slightly less nuclear RUU option that I'm unaware of?
Click to expand...
Click to collapse
Factory reset, or using HTC sync to "repair phone"
Sent from my HTC6500LVW using XDA Free mobile app
---------- Post added at 09:23 PM ---------- Previous post was at 09:17 PM ----------
Gladhatter said:
So very sorry for my ignorance As I am going to get the cell phone craze and then the smartphone craze.
The last cell phone I owned took a team of mules to take the battery.
Please tell me what the term ruu means.
My interest is to completely or near completely "gut" my Verizon note 4 in my US Cellular note 4 and then be able to install single or multi boot systems, hopefully using modular Code
That would be either less than typical roms then I read about here or else very streamlined roms only data that would support the main operating system and whatever hardware is installed. I certainly wouldn't want to end up with S OFF and routed machines that I could then install stock or custom-written Apps, software firmware and Code whatever else kind I may desire. well I remain hopeful that many will tell me this is not a problem even so it's all tells me it is impossible I will remain confident of success As I am convinced tenacity is more powerful than all the smarts in the world as well as a good looks fast runners sweet talkers and even possibly the best Coders out there that may only lack that one trait named tenacity. if there's another post about this anymore please get me to that.
Thank you in advance we anticipated cooperation and kindness, I remain.
Charlie aka Gladhatter
Sent from my SM-N910V using XDA Free mobile app
Er
Click to expand...
Click to collapse
Unfortunately most of us in this section won't be able to help. Your best bet is going to the Verizon Samsung Galaxy Note 4 section. Coming for help with your note 4 in an HTC section is like asking some people who know Chevy if they could help you fix your Ford. The expert advise would be ask the Ford experts and not the Chevy experts.
RUU is a term for HTC phones: Rom Update Utility. Samsung devices use Odin and I have no idea how to use it. I would help if I could.
The correct area for your device:
http://forum.xda-developers.com/note-4-verizon
Sent from my HTC6500LVW using XDA Free mobile app
Uzephi said:
Factory reset, or using HTC sync to "repair phone"
Sent from my HTC6500LVW using XDA Free mobile app
Sent from my HTC6500LVW using XDA Free mobile app
Click to expand...
Click to collapse
What does the repair phone option do? And I guess I wasn't too clear. My phone, for the most part, is fine. Everything works fine *except* that KingRoot won't install correctly. All my other apps are fine.

Remove Hands Free Activation (HFA) from a Sprint Samsung Galaxy S6

Hello All,
Mainly I want to get rid of Hands Free Activation ("HFA") which is a huge nuisance. I'd prefer NOT to trip KNOX, but if I have to then I will just go have to because HFA is worse I think. If there is a way to disable HFA without rooting at all, that would be the best choice for me!
I bought this phone second hand for use with GSM outside of the USA.
My specs are as follows:
Model: SM-G920P
Android 6.0.1
Samsung Galaxy S6
build: MMB29K.G920PVPU3CPB6
I'm a technical guy but not really a phone expert, so if anyone can tell me on a high level how to remove HFA or root my phone I'd appreciate it. I think once rooted I can disable the HFA app, but as things are now I cannot disable it. Sometimes I can kill the app, but it comes back anyway.
Thanks!
Additional Information
I wanted to mention here guys that I'm not looking for free tech support here. I watched several youtube videos and online tutorials and most of what I am reading says that PingPong won't work because of my version of Android being too recent, and any other method will trip KNOX.
This video seemed the most promising, the one that can be found by searching "How to Root Galaxy S6/S6 Edge! by Anuj Patel" on YouTube (sorry I can't post URLs yet) and it went on to refer to an online guide (Google: "How to Root Galaxy S6 and Galaxy S6 Edge! [TWRP Recovery + Root] androidrootz") but some of the files my browser won't let me download because it says downloadandroidfiles-DOT-org is an attack site and the idea of a rootkit or malware on my phone is very frightening. In the same YouTube page a poster asks if it trips KNOX and the same author Anuj says it does but if you do not want to, to try this method (Google: "How to Root Galaxy S6 & S6 Edge without Tripping Knox! [PingPong Root] anroidrootz"). But again, it seems dependent on an older version of android and/or downloading files from the "attack site" mentioned above.
I just wanted to make it clear that I have done many hours of research.
Thanks,
Bescalan
Saafir said:
I'm not certain on removing the HFA or what its dependency among other things may be. You can achieve root following the OP instructions here http://forum.xda-developers.com/sprint-galaxy-s6/general/guide-how-to-root-marshmallow-sm-g920p-t3338694
All the files are safe as theyre shared by respected Devs here. Be sure to press the Thanks button for them.
Make sure you untick the reboot option in Odin before you flash the TWRP file.
Click to expand...
Click to collapse
I appreciate the prompt reply! Considering your first comment, can anyone please let me know if they have had experience disabling the HFA?
Just remove HFA, you dont need to be rooted.
Search for package disabler app, and disable freeze the service "system update" (sprintdm.apk) and done.
Okay, great, so HFA seems gone. Thanks!
Unfortunately, now my problem is an "Invalid SIM" notice that comes up after a while and disables my 3G Internet. A message that the SIM was locked comes up (I have to click OK), and then a persistent SIM icon is in the top notification area that states: "Invalid SIM".
I went to my local CDMA telecom provider and they said that because I installed Marshmallow I have made it very hard for the phone to work. Unfortunately, it was the previous owner that upgraded it. I am not sure a downgrade is possible. They put in a Sprint chip and left it in, but I do not even want to use a SIM (because I'm using CDMA) and the Sprint Chip does not seem to help much if at all. There is no Sprint in my country anyway, so I'm not sure if my phone company thought it would help with the Invalid SIM message. The only way for me to get 3G back is to power cycle my phone and use it before the invalid SIM message comes up again after a few minutes.
My research has suggested that this is because the phone is locked, but I am wondering if there is a way around this. Perhaps I can disable another .apk file to stop this from happening since it does not happen from the very start, much like the HFA.
My specs are:
IMEI(MEID) AND SN 990005771730596 01 MEID 99000577173059 My Phone is a Galaxy S6 running 6.0.1 Android and for Spring. It keeps saying INVALID SIM. I tried to pay for Unlock Service from safeunlockcode.com but they said:" Thank you for your email. We are sorry but we are not able to unlock your device because we don't support for unlocking IMEIs starting with 99000."
Any help would be greatly appreciated. Thanks.
Saafir said:
May work if you get what you pay for, lol.
Click to expand...
Click to collapse
What do you mean by that? Do you mean that the free advice of not needing root is worth its cost?
Saafir said:
Try going to Settings>Mobile Nerworks>Network Mode, and select CDMA Only, see how that goes. You may try toggling Airplane Mode instead of a power cycle until resolved *shrugs*
---------- Post added at 02:37 PM ---------- Previous post was at 02:30 PM ----------
I mean that there was some funky issues with the application license that a lot of people who paid couldn't access the pro version. If you got it, woot.
Click to expand...
Click to collapse
Oh! I rooted anyway so I didnt try that app. Doubt it would have worked without root tho I did try some other package killers.
Hi I have the same issue on my S6 G920P... It keeps asking me to put the original SIM to carry on the activation.
I am just tired of this S6, any options even if I have to pay, I will.
Ohhh forgot to mention that I have this problem since I updated the firm to marshmallow
Saafir said:
Try going to Settings>Mobile Nerworks>Network Mode, and select CDMA Only, see how that goes. You may try toggling Airplane Mode instead of a power cycle until resolved *shrugs*
---------- Post added at 02:37 PM ---------- Previous post was at 02:30 PM ----------
I mean that there was some funky issues with the application license that a lot of people who paid couldn't access the pro version. If you got it, woot.
Click to expand...
Click to collapse
I think this is on to something in that you are saying if I don't need GSM then why not just disable GSM entirely and hopefully avoid the Invalid SIM message. Unfortunately, it still does not work. Is there a service/app I can disable that does the verification?
If I take out the SIM, 3G never comes up and from the start I have a persistent top notification message: "No SIM, Insert SIM Card."
I can still make calls, but no 3G internet
Any other suggestion would be greatly appreciated.
if you rooted your S6 already, just install the titanium backup app and freeze the service "system update".
yaibakt said:
if you rooted your S6 already, just install the titanium backup app and freeze the service "system update".
Click to expand...
Click to collapse
Thank you for the reply.
But there is no System Update? There are two "Software Updates" I get when filtering by "Update":
1) Software Update 1.1.57
2) Software Update 3.1.12
Are these the ones you are suggesting I freeze? Because I can't find a "system update"
bescalan said:
Thank you for the reply.
But there is no System Update? There are two "Software Updates" I get when filtering by "Update":
1) Software Update 1.1.57
2) Software Update 3.1.12
Are these the ones you are suggesting I freeze? Because I can't find a "system update"
Click to expand...
Click to collapse
I have no idea why you dont have it.
Please have a look at my ss.
yaibakt said:
I have no idea why you dont have it.
Please have a look at my ss.
Click to expand...
Click to collapse
Oh, if it's SprintDM it's because I also renamed that .apk file in hopes it would stop the SIM problem from re-occurring. If it is still happening, then I doubt rename the .apk from .bak back into .apk and then freezing it would help--what do you think?
Saafir said:
You WILL need root access, unless you use a PC version debloater via adb of some sorts. And that may not work. Anywho, after root, you'll need to navigate to system>priv app. Here you will want to find and rename "Activation.apk" to "Activation.apk.bak"
If that doesnt stop HFA entirely...
The next one you will want to find is "SprintSyncMLSvc.apk" to "SprintSyncMLSvc.apk.bak"
And if it STILL persists..
"SprintSyncMLPhoneIF.apk to "SprintSyncMLPhoneIF.apk.bak"
This will prevent the OS from loading them.
Click to expand...
Click to collapse
So I've come a long way. I rooted my phone, I apparently unlocked it, re-flashed it, did a hard reset. Now I have signal (can make calls), and my 3G hardly works.
Basically, 3G does not come up at all if I have HFA disabled. HFA when enabled goes through three steps:
1. It says "Welcome! Configuring your device for voice and data." (during this time 3G works, but it is only a few seconds)
2. It says "Waiting to retry" and counts down for like a minute before going back to step 2 (during this time, 3G does NOT WORK)
3. After a bunch of failed retries, it says: "Activation not completed". (and 3G stops altogether until I restart the phone.)
So, how can I disable HFA if when I disable it 3G never comes up to begin with?
bescalan said:
So I've come a long way. I rooted my phone, I apparently unlocked it, re-flashed it, did a hard reset. Now I have signal (can make calls), and my 3G hardly works.
Basically, 3G does not come up at all if I have HFA disabled. HFA when enabled goes through three steps:
1. It says "Welcome! Configuring your device for voice and data." (during this time 3G works, but it is only a few seconds)
2. It says "Waiting to retry" and counts down for like a minute before going back to step 2 (during this time, 3G does NOT WORK)
3. After a bunch of failed retries, it says: "Activation not completed". (and 3G stops altogether until I restart the phone.)
So, how can I disable HFA if when I disable it 3G never comes up to begin with?
Click to expand...
Click to collapse
Are you SIM unlocked? You need to be SIM unlocked, both domestic and international. Have you done the "UICC Unlock" option under System Update?
elesbb said:
Are you SIM unlocked? You need to be SIM unlocked, both domestic and international. Have you done the "UICC Unlock" option under System Update?
Click to expand...
Click to collapse
I am SIM unlocked, but I want to use a CDMA not. GSM network. UICC unlock, if I have HFA enabled takes me back to HFA. If I have disabled HFA, UICC unlock appears to so nothing.
As per @yaibakt posted, I can confirm that freezing the System Update Package 1.15.32 with Titanium Backup on G920P 6.0.1 PF4 (Domestic Unlock U.S.A) actually kills the Hands Free Activation pop up in every boot, thanks.
bescalan said:
Hello All,
Mainly I want to get rid of Hands Free Activation ("HFA") which is a huge nuisance. I'd prefer NOT to trip KNOX, but if I have to then I will just go have to because HFA is worse I think. If there is a way to disable HFA without rooting at all, that would be the best choice for me!
I bought this phone second hand for use with GSM outside of the USA.
My specs are as follows:
Model: SM-G920P
Android 6.0.1
Samsung Galaxy S6
build: MMB29K.G920PVPU3CPB6
I'm a technical guy but not really a phone expert, so if anyone can tell me on a high level how to remove HFA or root my phone I'd appreciate it. I think once rooted I can disable the HFA app, but as things are now I cannot disable it. Sometimes I can kill the app, but it comes back anyway.
Thanks!
Click to expand...
Click to collapse
Hey!! use package disable pro apk and disable system update from it that all you have to do!!
bescalan said:
I wanted to mention here guys that I'm not looking for free tech support here. I watched several youtube videos and online tutorials and most of what I am reading says that PingPong won't work because of my version of Android being too recent, and any other method will trip KNOX.
This video seemed the most promising, the one that can be found by searching "How to Root Galaxy S6/S6 Edge! by Anuj Patel" on YouTube (sorry I can't post URLs yet) and it went on to refer to an online guide (Google: "How to Root Galaxy S6 and Galaxy S6 Edge! [TWRP Recovery + Root] androidrootz") but some of the files my browser won't let me download because it says downloadandroidfiles-DOT-org is an attack site and the idea of a rootkit or malware on my phone is very frightening. In the same YouTube page a poster asks if it trips KNOX and the same author Anuj says it does but if you do not want to, to try this method (Google: "How to Root Galaxy S6 & S6 Edge without Tripping Knox! [PingPong Root] anroidrootz"). But again, it seems dependent on an older version of android and/or downloading files from the "attack site" mentioned above.
I just wanted to make it clear that I have done many hours of research.
Thanks,
Bescalan
Click to expand...
Click to collapse
Deactivate Hands Free Activation ( HFA)
Open the calculator app
Type in (+30012012732+
This opens drparser mode
On that pad type ##27263#
Then hit yes to reset provisioning
The device may reboot a couple of times and may even cycle back to hands free activation one more time, but after that, it will stop and be activated properly
You're Welcome : good:

[Guide] How to get your MSL code

Alright so I was bored and started poking around trying to find a way to get the MSL. Well after a couple hours of trail and error, I got it! Here's how.
You will need: ADB, ADB Drivers, and a rooted device.
Plug your phone into your computer.
Run the following (in CMD) :
1: adb shell
2: su
3: am start com.sec.hiddenmenu/.Program_Edit
It should open a menu with your MSL at the bottom. Hope this helped!
I was able to find my MSL this way. I'm guessing this only works if you are rooted?
How To Find Your MSL Code
MOD EDIT: Post moved. Please do not create duplicate threads for the same topic in the forum.
Edit: yeah, I wasn't sure if it was 100% working. I made a new post after confirming.
Hey guys, I found a way to get the MSL code for your G920p to edit the DATA menu (##3282# in dialer)
Requirements:
* Rooted S6
* ADB Installed + Drivers
* USB Cable
Steps:
Open CMD / Terminal and run the following:
1. adb shell
2. su
3. am start com.sec.hiddenmenu/.Program_Edit
Scroll down to the bottom and you should see "Service Programming Code" this is your MSL.
I hope I helped! If I did, please press the thanks button! I took me awhile to find this! Let me know if you find anything else interesting in this menu.
Also, I wouldn't recommend playing around with the other settings unless you know what you are doing.
thanks,i find my msl using this method
Using idoneapps you can find your msl without rooting. Just downgrade to Lollipop and run the app. Price is roughly $20 to $30 for the app. No avoiding this price unless rooting and using the old idoneapps.
Johnrob011045 said:
Using idoneapps you can find your msl without rooting. Just downgrade to Lollipop and run the app. Price is roughly $20 to $30 for the app. No avoiding this price unless rooting and using the old idoneapps.
Click to expand...
Click to collapse
Sadly I can not go back to 5.1.1. samsung locked the bootloader and I am stuck on 6.0.1
Are you sure? I've downgraded mine to Lollipop from Marshmallow. There's certain updates that are locked because the binary level is lower than what's on your device. AOCF doesn't work. Just try the PD2 update.
Johnrob011045 said:
Are you sure? I've downgraded mine to Lollipop from Marshmallow. There's certain updates that are locked because the binary level is lower than what's on your device. AOCF doesn't work. Just try the PD2 update.
Click to expand...
Click to collapse
Will do
The pd2 is for idoneapps you have to talk to the guy and pay him. He might settle for $25 $20.
---------- Post added at 01:30 AM ---------- Previous post was at 01:28 AM ----------
If the app doesn't give you the msl, you can flash a lower firmware, I'll check which one I have that works and read the log of what the app did after it unlocks your phone. The msl, will more than likely be in the log.
Galaxy S6 Edge + and Note 5 was updated to Nougat. All we're waiting for is the edgeless version of the software to release. Maybe in another week..
what do I put here
Thanks, it worked for me after about three hours of trying to find my MSL or enable tethering, including rooting my phone in the first place. I made an XDA account just to thank you Also, it worked for me typing it in the Terminal emulator on the phone
Lesking72 said:
Thanks, it worked for me after about three hours of trying to find my MSL or enable tethering, including rooting my phone in the first place. I made an XDA account just to thank you Also, it worked for me typing it in the Terminal emulator on the phone
Click to expand...
Click to collapse
Glad I helped!
Poebat said:
MOD EDIT: Post moved. Please do not create duplicate threads for the same topic in the forum.
Edit: yeah, I wasn't sure if it was 100% working. I made a new post after confirming.
Hey guys, I found a way to get the MSL code for your G920p to edit the DATA menu (##3282# in dialer)
Requirements:
* Rooted S6
* ADB Installed + Drivers
* USB Cable
Steps:
Open CMD / Terminal and run the following:
1. adb shell
2. su
3. am start com.sec.hiddenmenu/.Program_Edit
Scroll down to the bottom and you should see "Service Programming Code" this is your MSL.
I hope I helped! If I did, please press the thanks button! I took me awhile to find this! Let me know if you find anything else interesting in this menu.
Also, I wouldn't recommend playing around with the other settings unless you know what you are doing.
Click to expand...
Click to collapse
Thank you so much! This worked like a charm! I am having difficulty getting my phone unlocked to work with T-Mobile. I have called Sprint to give my phone Domestic Sim Unlocking 2 days ago and I still get an invalid sim card error when I insert my Tmobile sim.
osirus1977 said:
Thank you so much! This worked like a charm! I am having difficulty getting my phone unlocked to work with T-Mobile. I have called Sprint to give my phone Domestic Sim Unlocking 2 days ago and I still get an invalid sim card error when I insert my Tmobile sim.
Click to expand...
Click to collapse
YW
also, are you on 6.0.1 or 5.1.1?
Poebat said:
YW
also, are you on 6.0.1 or 5.1.1?
Click to expand...
Click to collapse
I am on 7.0 I might have to pay idoneapps $35 dollars to unlock my phone.
osirus1977 said:
I am on 7.0 I might have to pay idoneapps $35 dollars to unlock my phone.
Click to expand...
Click to collapse
Is your contract up? Try updating the UUIC in the system settings tab
Poebat said:
Is your contract up? Try updating the UUIC in the system settings tab
Click to expand...
Click to collapse
yes my contract is up and I get an Internel Error (407) when I try to update UICC Unlock
osirus1977 said:
yes my contract is up and I get an Internel Error (407) when I try to update UICC Unlock
Click to expand...
Click to collapse
Call sprint about it. They are supposed to unlock your phone once your contract is up... Do you still have a sprint plan? Your phone needs to be activated in order to do this.
Poebat said:
Call sprint about it. They are supposed to unlock your phone once your contract is up... Do you still have a sprint plan? Your phone needs to be activated in order to do this.
Click to expand...
Click to collapse
I finally got a hold of a very good sprint customer care this morning and she unlocked the phone right away and my tmobile sim is working. Although I need to research why I can't uninstall sprint call utility or voice mail. I have my phone rooted and using Skyhigh kernal for android nougat. I try dialing 611 to get to tmobile customer care and it reroutes me to sprint.
osirus1977 said:
I finally got a hold of a very good sprint customer care this morning and she unlocked the phone right away and my tmobile sim is working. Although I need to research why I can't uninstall sprint call utility or voice mail. I have my phone rooted and using Skyhigh kernal for android nougat. I try dialing 611 to get to tmobile customer care and it reroutes me to sprint.
Click to expand...
Click to collapse
Install Titanium Backup to uninstall system apps

Categories

Resources