Hey guys, I'm trying to get adb and fastboot working under Linux. I added udev rules for adb, fastboot and flashmode(idk if this one was really necessary). Adb and fastboot are already working with my other devices, but does not seem to recognize my Xperia Play, adb devices in terminal lists nothing, same thing with fastboot devices. I tried using flashtool, it says my device is connected using fastboot and when i try to flash lupus kernel flashtool shoots an error saying my device needs to be connected with fastboot.
My Xperia is running Ics/Paranoid 4.0.4 and debugging mode is turned on
What can possibly be wrong here? Any Ideas?
Check the drivers. It could be giving you those errors because of the drivers you're using. Try to update them.
I have an HTC One m8 that is stuck on Bootloader. It is an unlocked bootloader with S-Off. I had CWM but I installed stock recovery back onto the phone before flashing a stock kernel (I was trying to make the phone look untampered with before I turned it over to my provider), the Kernel came with a sha1 and was from a trusted website and I am 100% sure it was the right compatible Kernel I'm pretty sure I just had a bad flash.
I have tired the following to get the phone past the bootloader:
1. Fastboot USB Mode --> Try to get ADB to recognize the device --> Debugging mode isn't on (obviously) --> ADB can't recognize the device.
2. Use AndroidSDKSlim/ Android SDK tools / Android Utility to remotely turn on Debugging mode (I got nowhere with this)
3. Attempted to use PdaNet to remotely turn on Debugging mode (got nowhere)
4. HTC Sense doesn't even know whats going on
I just need to get TWRP or CWM or litearlly Any recovery installed. That's all I need, I can do everything from there. I can't remotely install a recovery via adb because adb can't recognize my device because I can't turn Debugging mode on because my device is softbricked!!! Gahhhh. I haven't been able to come up with a way to remotely enable debugging mode or to get adb to recognize my device.
Any ideas/comments/suggestions would be heavily appreciated - I've resourced from every relevant thread I could find. Posting here was a last resort I try to fix things on my own but I'm too many days into this with no results please anybody.
ADB won't work while on fastboot mode. ADB only while in recovery or on OS running.
You don't need USB debugging on for fastboot
fastboot devices - see whether your device is listed with serial no.
if yes then run
fastboot flash recovery NameofRecovery.img
ckpv5 said:
ADB won't work while on fastboot mode. ADB only while in recovery or on OS running.
You don't need USB debugging on for fastboot
fastboot devices - see whether your device is listed with serial no.
if yes then run
fastboot flash recovery NameofRecovery.img
Click to expand...
Click to collapse
Thank you for reply!
I have not been able to get ADB to recognize the device, which is pretty much my whole issue right now. It does not appear under the devices list. If I can just get adb talking with my phone everything else should be easy, I just can't figure out why it's not recognizing it.
Gitnerd said:
I have an HTC One m8 that is stuck on Bootloader.
I have tired the following to get the phone past the bootloader:
1. Fastboot USB Mode --> Try to get ADB to recognize the device --> Debugging mode isn't on (obviously) --> ADB can't recognize the device.
Click to expand...
Click to collapse
Gitnerd said:
I have not been able to get ADB to recognize the device, which is pretty much my whole issue right now.
Click to expand...
Click to collapse
I repeat again my reply ...
ADB won't work while on fastboot mode. ADB only while in recovery or on OS running.
You don't need USB debugging on for fastboot
fastboot devices - see whether your device is listed with serial no.
When on bootloader/fastboot mode
run command
fastboot devices
not adb devices
Gitnerd said:
I just need to get TWRP or CWM or litearlly Any recovery installed. That's all I need, I can do everything from there. I can't remotely install a recovery via adb because adb can't recognize my device because I can't turn Debugging mode on because my device is softbricked!!!
Click to expand...
Click to collapse
then run these command to install recovery ... you can't install recovery via ADB, only fastboot
fastboot flash recovery NameofRecovery.img
ckpv5 said:
I repeat again my reply ...
ADB won't work while on fastboot mode. ADB only while in recovery or on OS running.
You don't need USB debugging on for fastboot
fastboot devices - see whether your device is listed with serial no.
When on bootloader/fastboot mode
run command
fastboot devices
not adb devices
then run these command to install recovery ... you can't install recovery via ADB, only fastboot
fastboot flash recovery NameofRecovery.img
Click to expand...
Click to collapse
Oh.. My..God..
You just saved my life, this whole time I thought fastboot utility in AndroidSDK was just a stripped version of ADB. I'm a moron!
I have TWRP up and running holy crap thank you so so so so much, you are seriously a life saver.
try this
Gitnerd said:
I have an HTC One m8 that is stuck on Bootloader. It is an unlocked bootloader with S-Off. I had CWM but I installed stock recovery back onto the phone before flashing a stock kernel (I was trying to make the phone look untampered with before I turned it over to my provider), the Kernel came with a sha1 and was from a trusted website and I am 100% sure it was the right compatible Kernel I'm pretty sure I just had a bad flash.
I have tired the following to get the phone past the bootloader:
1. Fastboot USB Mode --> Try to get ADB to recognize the device --> Debugging mode isn't on (obviously) --> ADB can't recognize the device.
2. Use AndroidSDKSlim/ Android SDK tools / Android Utility to remotely turn on Debugging mode (I got nowhere with this)
3. Attempted to use PdaNet to remotely turn on Debugging mode (got nowhere)
4. HTC Sense doesn't even know whats going on
I just need to get TWRP or CWM or litearlly Any recovery installed. That's all I need, I can do everything from there. I can't remotely install a recovery via adb because adb can't recognize my device because I can't turn Debugging mode on because my device is softbricked!!! Gahhhh. I haven't been able to come up with a way to remotely enable debugging mode or to get adb to recognize my device.
Any ideas/comments/suggestions would be heavily appreciated - I've resourced from every relevant thread I could find. Posting here was a last resort I try to fix things on my own but I'm too many days into this with no results please anybody.
Click to expand...
Click to collapse
1) Reboot the phone using Power+Vol Up
2) The moment the screen goes dark to reboot and before the white HTC logo screen appears again (Should be around 10 seconds), press the volume down key.... Do not let go of vol down until you see the bootloader screen
3) If the bootloader doesn't appear, you either started pressing Vol Down too late, or let go of it too early. Just do the steps again until you get it right.
4) Once you are in the bootlader, select select fastboot by pressing power key.
5)you can flash either permanent or temporary a TWRP recovery once you are in fastboot.
6)Once you are in recovery mode, you can transfer any custom rom to memory or sd card, then install it from the place you chose.
7) you can flash RUU file at fatboot mode as well.
Hello, I have problem with fastboot mode ealier it was working well but in Minimal Adb and flashboot i seen <waiting for device> so I started checking drivers and after this fastboot mode stopped working. I tried to run fastboot by command adb reboot fastboot but it just reboots phone I need help very fast. [I need fastboot mode to flash CWM on my phone then root it and install cyanogen mod 13 (android 6)]
Hy
I had an unlocked bootloader phone. Yesterday I flashed the new Android 6, Europe version from the Huawei blog forum, no beta, on my Huawei GX8. I used the method, dload on SD card, Phone off an the press Volume down+volume up+Power button.The flashing was normaly.
Now the phone starts normaly but I can´t start fastboot. When the phone is off and i press Vol down + Power the phone start the android system and the Huawei logo is coming not the fastboot Modus. I can see my phone and the order under Windows but i can not control my phone with the fastboot command. (example: fastboot device. the answere ist searching devices, but it comes no resolution) I loaded the last version of Fastboot, but the problem is the same.
Please can you help me. What can i do? Many thanks for your help!
Should be connect the charger cable to the phone.
charger or computer
excuse me for bad english
No i use a data cable, debugging is on. I can copy data from my phone to PC or from PC to phone, but fastboot does not found my device.
bertl237 said:
No i use a data cable, debugging is on. I can copy data from my phone to PC or from PC to phone, but fastboot does not found my device.
Click to expand...
Click to collapse
And when you use adb to reboot to bootloader, what happen? Do you have "Minimal adb and fastboot tool" installed?
krispin said:
And when you use adb to reboot to bootloader, what happen? Do you have "Minimal adb and fastboot tool" installed?
Click to expand...
Click to collapse
Sorry for my question, what´s the differents about adb and fastboot tool? I have install the last version of minimal adb and the fastboot tool, also the Windows driver for the phone. Debugging is on. I try to connect my phone about the fastboot terminal. When i try to set the phone into the bootloader mod with the fastboot terminal and the equivalent command, fastboot say´s "searching phone". My phone does not react.
bertl237 said:
Sorry for my question, what´s the differents about adb and fastboot tool? I have install the last version of minimal adb and the fastboot tool, also the Windows driver for the phone. Debugging is on. I try to connect my phone about the fastboot terminal. When i try to set the phone into the bootloader mod with the fastboot terminal and the equivalent command, fastboot say´s "searching phone". My phone does not react.
Click to expand...
Click to collapse
So, you connect your phone, open minimal adb and fastboot too, run "adb devices", you see device id? If yes, run "adb reboot bootloader" . Phone shoult reboot to fastboot mode. Then run "fastboot devices" to see if it is connected properely.
i did it, like you described, but i see not my device id. Only the note "seach device"
Is it possible that TWRP is defect on my device? Is TWRP necessary for fastboot or only for root?
bertl237 said:
i did it, like you described, but i see not my device id. Only the note "seach device"
Is it possible that TWRP is defect on my device? Is TWRP necessary for fastboot or only for root?
Click to expand...
Click to collapse
No, you should be able to use adb and fastboot with stock recovery.
After first adb command you shoult approve authorization on your phone.
Here is screenshot from minimal adb...
Phone must be in MTP mode.
And here is phone in fastboot
Many thanks for your help, now I m in my bootloader.
2 problems i had.
1. My daemon was not started correctly, i have not seen my device.
2. I used the wrong command. I started with fastboot, not with the command adb device. I tap „fastboot reboot-bootloader“,but the correct command is “adb reboot-bootlader“
Now i have seen my phone is unlocked, i hope i can root my android 6.
bertl237 said:
Many thanks for your help, now I m in my bootloader.
2 problems i had.
1. My daemon was not started correctly, i have not seen my device.
2. I used the wrong command. I started with fastboot, not with the command adb device. I tap „fastboot reboot-bootloader“,but the correct command is “adb reboot-bootlader“
Now i have seen my phone is unlocked, i hope i can root my android 6.
Click to expand...
Click to collapse
Just reboot to fastboot and flash surdu-petru version of TWRP recovery 3.0.2 with command "fastboot flash recovery xxxxx.img". And than reboot to recovery and flash supersu zip.
I have an HTC One m9 that bootloops and has a broken recovery that cannot be booted into. It has an unlocked bootloader. I tried to go into download mode and recover the phone with adb commands, but the device does not show up in the command line as a connected adb device. I suspect that is because usb debugging is not enabled. is there any way to enable usb debugging without having a working recovery or main os, or am I out of luck. Also is there any other way to unbrick the phone without using adb or usb debugging?
Re-flash Stock ROM.
Code:
fastboot devices
fastboot flash <STOCK-ROM.zip>
When I plug in the phone to the computer via usb, it does not find it as a device when I do fastboot devices. if I try to flash anyway, it just says something along the lines of waiting for device.
Also does it matter if I use powershell or cmd?
its better to use cmd, and have you installed fastboot drivers?