[Q] Prompted for Device storage encryption password after decryption - Galaxy Note II Q&A, Help & Troubleshooting

I had encrypted enforced through a company policy. Device worked fine no problems. Enter pin at boot and in we go.
This policy was removed and I de-encrypted the device. Still no problems.
The device clearly showed it was not encrypted and I had the option to encrypt - so all good so far.
I rebooted the device and was asked for my device storage password. I entered my old pin and it booted ok. Bit strange I thought but device works so that's good right?
So I did a factory reset. Same thing happened. prompted for a PIN
I re flashed the phone back to the original carrier ROM - same thing. Still being prompted for PIN.
I installed TWRP 2.6 and did a format - same thing.
Does anyone have any idea how to get rid of the encryption? (Well the fact it keeps asking for the de-encryption PIN - as its actually not encrypted)
thanks

Related

[Q] Rooting Full Disk Encrypted n7100

Hi,
I have the samsung galaxy unlocked n7100 phone. I decided to root the phone (im a noob) and was following the instructions on technobuffalo.
I ran Odin3.07, clicked PDA and used CF-Auto-Root-t03g-t03gxx-gtn7100.tar.md5. Seemed to work find (see screenshot). The device rebooted and asked "Enter the PIN or password to use the encrypted device storage facility" as I have full disk encryption turned on previously.After entering PIN the screen goes blank and nothing more happens.
I gather that the encryption is the problem? How do I go about fixing this?
Appreciate any help.
SOLVED
StalemateNZ said:
Hi,
I have the samsung galaxy unlocked n7100 phone. I decided to root the phone (im a noob) and was following the instructions on technobuffalo.
I ran Odin3.07, clicked PDA and used CF-Auto-Root-t03g-t03gxx-gtn7100.tar.md5. Seemed to work find (see screenshot). The device rebooted and asked "Enter the PIN or password to use the encrypted device storage facility" as I have full disk encryption turned on previously.After entering PIN the screen goes blank and nothing more happens.
I gather that the encryption is the problem? How do I go about fixing this?
Appreciate any help.
Click to expand...
Click to collapse
Ok no problem. I panicked. As I have no data that I wanted to keep I did a factory reset. Things back to normal, now I will root ph and put cyangenmod on it.

Device doesn't boot up because it needs a password?

Hi,
i already thank you for all answers. There's a big problem with my device.
It's an OnePlus 3 with the MarshROM. Everything worked completely fine until i wanted to install SuperSU via recovery. It showed up that it needs a password. But i never did this password! It's none of my known passwords, so what should i do now?
Thanks for your answers and I apologize for my english.
did u make a nandroid backup, also is it asking for the pw in twrp or when trying to get into the OS
Yes, i can't enter TWRP and yes i did a nandroid backup
If you set up fingerprints, it also means you had to set up a backup PIN. Your partition is encrypted, so try the PIN to unlock
castironpuppet said:
If you set up fingerprints, it also means you had to set up a backup PIN. Your partition is encrypted, so try the PIN to unlock
Click to expand...
Click to collapse
Tried it, also doesn't work..
It happened me once, it asked for my password and not the fingerprints to unlock the screen. But my password didn't work. I rebooted the OP3 and as I activated the option to ask password at boot, it asked for a password before booting and my usual password worked (that same password that I tried before rebooting if I didn't made myself clear).
For flashing supersu, yes it ask a password and it's the password that you set up when you register your fingerprint. At first I used a pin code but I could not remember the pin because I only remember the position I input on the numerical keyboard and in twrp it use a full keyboard. So I changed for a password and it worked fine.
The device is encrypted so you need a password if you need to flash something.
If you can still boot your device, choose 1234 as a pin. If it's asking you for a password at boot, then you are screwed.
So no returning?
Le_Zouave said:
It happened me once, it asked for my password and not the fingerprints to unlock the screen. But my password didn't work. I rebooted the OP3 and as I activated the option to ask password at boot, it asked for a password before booting and my usual password worked (that same password that I tried before rebooting if I didn't made myself clear).
For flashing supersu, yes it ask a password and it's the password that you set up when you register your fingerprint. At first I used a pin code but I could not remember the pin because I only remember the position I input on the numerical keyboard and in twrp it use a full keyboard. So I changed for a password and it worked fine.
The device is encrypted so you need a password if you need to flash something.
If you can still boot your device, choose 1234 as a pin. If it's asking you for a password at boot, then you are screwed.
Click to expand...
Click to collapse
Exordos said:
So no returning?
Click to expand...
Click to collapse
Okay i did it. Going to make a tutorial
you mean chosing a password in the phone resolved your problem?

Advisable to set a screen lock, in case of problems with recovery?

I just rooted my brand new 1+3 and put CM13 on it, with TWRP recovery. I haven't set any sort of screen guard or fingerprint yet, since I'm not sure if that will end up encrypting the disk as well.
I've seen other posts about how people could not use the recovery because it prompted for a password - and typing the PIN didn't work for them. I have already taken a nandroid backup of the original OxygenOS, and saved it elsewhere (i.e. not on the phone). So if I go ahead and set a password, will it cause any problems later, if I have to use the recovery? Is it better to stick to a PIN instead of the pattern lock?
Edit - now when I go into recovery, the log says 'successfully decrypted with default password'. What's this default password? If I set a screen PIN, will it change to the PIN, or is it something else? Will setting the PIN/fingerprint prevent me from mounting data as I can now?

Follow the path.. What'd I do?!

Hey guys -
Need some detective help. I did something to my 10, and I think I did something with the encryption, but I'm not sure how or what.
Follow me here, since I'm not sure what caused it, I'll start at the beginning, and see if anything raises a red flag..
Got phone from HTC, US unlocked version. Got it in.. heck, this past June, I think.
Unlocked bootloader. Got Sunshine, ran it, but never paid and never turned S-OFF.
Never set PIN or Fingerprint.
Installed Viper10 when it was out.
Went to do fingerprint. Got screen saying that for backup, needed to set PIN. Set PIN, then taught it some fingerprints.
Never had data issues, and as far as I know, never encrypted phone. TWRP, when run, did not need me to enter any password or key to access the phone. On bootup, would get PIN prompt, but AFTER Android loaded.
Never got any RUUs, never upgraded Viper10.
Installed CM13 today. Whohoo!
Install went fine, no issues. Restored apps from TiBu, deleted unused bloatware, including the built-in Android keyboard.
Set up other options, and finally got to enter in fingerprints.
It gives me the same screen I got on Viper. This time, though (and I have no idea why), I back out back to Security settings, and enter in PIN there.
Then train fingerprints!
Now, when I reboot system, or boot to TWRP, I get a prompt asking for password (TWRP) or PIN (Android). HOWEVER.. I can enter my pin in TWRP just fine. But not Android. Apparently, since it hasn't booted, Swype doesn't work, and I get no keyboard. Can't enter PIN in at all.
That is my mistake, however, as I removed the built-in Android keyboard. (Something I've done countless times before on other Android versions without issue..)
So I restore Nandroid backup of Viper10. I still get the PIN entry, and STILL have no keyboard.
I see reference in TWRP about PINs not working, so I delete that locksettings.db file (from memory, filename is likely wrong here..)
Phone boots up. Yay. No PIN prompt. Yay.
But now I do NOT have data - as in, it's acting like my phone is unencrypted now.
So, what I'd like to know is -
If NOW my phone is unencrypted, and I'm getting the 'No Data' issue, what was my phone doing BEFORE, when I didn't have to enter PIN, but was getting data?
How can I get BACK to not having to enter PIN and still get data? (In my case, will the instructions for unencrypted work? Or is my phone now 'special'?)
How did I set the PIN the first time on Viper10, and not have it encrypt my phone? I'd like to ultimately get back to THAT scenario - where the lockscreen asks for PIN, but nothing else does (TWRP, Bootup, etc).
Thanks guys!
-Mike
I may be pointing the obvious, but have you do a full wipe before restoring your nandroid? If so, did you try to clean flash your rom to see what happens?
Maybe by removing stock keyboard something got messed up and keeps the keyboard in your nandroid from properly installing.
Yup, I tried restoring the Nandroid several times, some with wiping, some without. Also, I always clean-flash my new ROMs (i.e. ones not restored from nandroid backup, installed new, like going from Viper10 -> CM13)
Going to try again today while at work, see what happens.
During setup in CM13, there should be option to require PIN at startup (It is usually checked by default). Uncheck it and your phone will remain encrypted without requiring a PIN to start.
jackebuehner said:
During setup in CM13, there should be option to require PIN at startup (It is usually checked by default). Uncheck it and your phone will remain encrypted without requiring a PIN to start.
Click to expand...
Click to collapse
Technically correct (encrypted) but effectively incorrect: encryption is moot if a password is not required to decrypt it. It would be like locking your door and leaving the key in it: it's locked but it's not secure.
You need a system keyboard to be able to enter PIN on bootup; hence, the pre-installed keyboard (Google on vanilla, TouchPal on htc) isn't really 'bloatware' as it's necessary. Google makes a good keyboard; TouchPal, though, yeah, necessary bloatware in this case.
Rolo42 said:
Technically correct (encrypted) but effectively incorrect: encryption is moot if a password is not required to decrypt it. It would be like locking your door and leaving the key in it: it's locked but it's not secure.
Click to expand...
Click to collapse
Ah, so in previous ROMs (both OEM and Viper10, it technically WAS encrypted, I just never set the password? .. Huh.
Rolo42 said:
You need a system keyboard to be able to enter PIN on bootup; hence, the pre-installed keyboard (Google on vanilla, TouchPal on htc) isn't really 'bloatware' as it's necessary. Google makes a good keyboard; TouchPal, though, yeah, necessary bloatware in this case.
Click to expand...
Click to collapse
Interesting, thanks for this; good to know. A shame, but good to know that's just how it is.
coyttl said:
Ah, so in previous ROMs (both OEM and Viper10, it technically WAS encrypted, I just never set the password? .. Huh.
Interesting, thanks for this; good to know. A shame, but good to know that's just how it is.
Click to expand...
Click to collapse
Correct. The password is to get at the encryption key; it isn't the encryption key itself.
Bitlocker/SED works the same way. Otherwise, a password change would mean re-encrypting everything.
If you put in the wrong password, it'll look like you have no data.

[SOLVED] Encrypted but no need to enter password

Hey guys,
I have always had my op3 encrypted and I've become used to always entering the pin when booting up, accessing twrp etc. but today when I rebooted into twrp I didn't have to enter any pin to use twrp. When booting up the system I didn't have to enter a pin either.
When I check the settings under Security & Fingerprint it looks as in the attached screenshot, I don't have any options to decrypt or anything either
I'm running OOS 4.1.3, FrancoKernel #23 , Magisk 12, twrp-3.1.0-x_blu_spark_v27.
Is this something that anyone has experienced and know how to fix?
I want to keep my encryption but then, of course, you should have to use the pin.
Cheers!
Then the pin is defaulted and thus you don't need any. I don't need one, too and never did, but all is encrypted (Even locked down with a pin on bootup and fingerprint otherwise)
I believe this is an option you need to setup during the wizard when you initially set up the device. It asks you whether you want to require a pin on startup or not.
But, you can also turn this on by going to settings>security>screen lock.
From there, you click on the area where it says PIN. Confirm your pin, then click PIN again, and there should be an option to require pin for startup. Other than that, you are still encrypted, but it is all bypassed in order for quicker startup.
Sent from my ONEPLUS 3 using Tapatalk
noobtoob said:
I believe this is an option you need to setup during the wizard when you initially set up the device. It asks you whether you want to require a pin on startup or not.
But, you can also turn this on by going to settings>security>screen lock.
From there, you click on the area where it says PIN. Confirm your pin, then click PIN again, and there should be an option to require pin for startup. Other than that, you are still encrypted, but it is all bypassed in order for quicker startup.
Sent from my ONEPLUS 3 using Tapatalk
Click to expand...
Click to collapse
Ah that was it! it had somehow disabled itself, simply going in and enabling "require pin to start device" solved it.
Thanks!
Try removing the lock screen password and setting it up again and it will be back again in twrp.?

Categories

Resources