Related
Hey guys all my restores are failing half way through. It also fails if I try to factory reset or wipe dalvik but wipe cache works fine It fails if i try flash any ROM.. And if I try to boot to system it shows SG logo then black screen I'm really kind of lost here. I've already tried flashing 4 different versions of Twrp/clockworkmod and I get the same result every time. The roms I'm trying to flash were running fine on my device before this happened. Never seen this before please help thank you.
Sent from RootBox infected sensation or my PacMan e739
djwuh said:
Hey guys all my restores are failing half way through. It also fails if I try to factory reset or wipe dalvik but wipe cache works fine It fails if i try flash any ROM.. And if I try to boot to system it shows SG logo then black screen I'm really kind of lost here. I've already tried flashing 4 different versions of Twrp/clockworkmod and I get the same result every time. The roms I'm trying to flash were running fine on my device before this happened. Never seen this before please help thank you.
Sent from RootBox infected sensation or my PacMan e739
Click to expand...
Click to collapse
is this an i747 or i747m (carrier?)? what was the last thing you did to the device/had you just modified or flashed something? were you using recovery or odin to flash the 4 different recoveries?
xBeerdroiDx said:
is this an i747 or i747m (carrier?)? what was the last thing you did to the device/had you just modified or flashed something? were you using recovery or odin to flash the 4 different recoveries?
Click to expand...
Click to collapse
I have sgh i747 at&t us model. Unlocked Sim for Tmobile use. Before having problems. I flashed vanilla rootbox att nightly. it was running fine then I flashed acid audio mod. And it worked but not well with my player of choice. So i flashed a restore from fright before the sound mod. And all I got was 2 different Samsung logos then black screen. At this point Twrp started asking for a password. I tried an older backup. (rootbox stable) and it booted fine. Everything seemed to be working. But when I rebooted again I got the 1St SG logo then black screen. Now recovery doesn't read anything on the internal card as well as the other problems I stated. I used mskips toolkit to flash Twrp originally and now I've been flashing back and forth between recoveries using recovery flashable zips. Also every time I flash roms or restore I did factory wipe/cache/dalvik and after I started having these issues I tried wiping system and that didn't help either. Thanks for trying to help
Sent from RootBox infected sensation or my PacMan e739
what recovery are you currently sitting on?
Twrp 2.4.4.0 is what I started with and now I'm back on it but from a flashable zip this time instead of whatever mskips toolkit used
Sent from RootBox infected sensation or my PacMan e739
here is the link to an odin flashable twrp 2.5.0.0 tar: http://techerrata.com/file/twrp2/d2att/openrecovery-twrp-2.5.0.0-d2att.tar
and here's a recovery flashable twrp 2.5.0.0 zip link: http://forum.xda-developers.com/attachment.php?attachmentid=1917517&d=1367104589
if you flash in recovery, be sure to reboot recovery in order to boot into the new version. i'm sure you know most of this but i'm just trying to cover all the bases.
is twrp still asking for the password or were you able to get passed that?
if you have a micro sd card, you could place a ROM/gapps on it, flash this latest twrp recovery from odin or recovery, perform a full wipe (cache, dalvik, data, system) and flash the ROM/gapps. see if that remedies your situation.
if you dont have a micro sd card, and it appears you've wiped the system so there's no OS, you may have to odin back to rooted stock and start over. keep me posted
Still no luck. i flashed twrp2.5 through recovery and after rebooting back to recovery it still asked for a password so I hit cancel at which point it lets me continue and after full wipe as you described above and a fresh flash of stable rootbox 3.9.1 (md5 matched) im still in the same situation. also factory wipe says failed still
I think at this point if it were me, I would Odin flash back to stock then start from scratch. Pain in the butt I know, and no guarantee, but usually flash back to stock is a safe bet.
Another option is to grab the Odin flashable cwm tar in the "root from recovery" method in the general section. Flash the tar, boot into recovery and flash the 6.0.3.1 zip in post #2 of my signature link. Reboot recovery and try wiping/flashing again.
Since you're not entering the password in TWRP, I think that's why you're not getting successful wipes and flashes.
now I used the power+home+vol down button combo to see if bootloader would start. it gave me a choice to download a custom rom or cancel so I canceled and the phone rebooted and i was blessed with the beautifull rootbox animation. my rootbox 3.9.1 nandroid booted and seems to be running fine. Now Im afraid to reboot in fear it will start the whole process over again. any suggestions? or should I just leave it powered on for the rest of its life lol
edit: well I got up the guff to reboot and everything came back fine again WTH. this is so weird, I wish I had a clue what happened. anyways I just wanted to thank you guys one more time for you help. hopefully we wont have to come back to this thread. Peace ;-]
Man that is strange. If that ever happens again it would be interesting to see the log if you can get it. I wonder if there were issues mounting a partition and/or your SD card. If TWRP and CWM were both having an error and the files were on your SD card that would probably be the only thing in common that could cause something like this. Some Transformers seemed to have the password issue, but doesn't seem related to your experience. Glad you got it sorted.
this is just weird, as i have been installing custom ROM like crazy...
but for some time i was on CM 10.1.2 and didnt install any custom ROM, but i felt like coming back to TW based ROMs, so tried installing DeTmobilized 1.5, but phone stuck at boot screen, i tried to restart by pulling battery out but phone displayed "encryption failed" and kept on showing phone.apk stopped working (something similar). so i decided to ODIN to stock and start fresh, this time i tried installed Dandroid 3.8.1 and it worked, so i thought of giving DeTmobilized one more try, but again it got stuck at samsung letters at the boot.
so i decided to stick with Dandroid for a while, but now i cannot install that too. it gets stuck while booting. but if i ODIN to stock everything works fine on stock firmware, its only the custom ROMs that are not working.
i also tried repartitioning using PIT file along with stock md5 hoping that would solve this issue, but it hasnt.
i need help, i cannot stay on stock ROM.
thank you.
chirantan.f said:
this is just weird, as i have been installing custom ROM like crazy...
but for some time i was on CM 10.1.2 and didnt install any custom ROM, but i felt like coming back to TW based ROMs, so tried installing DeTmobilized 1.5, but phone stuck at boot screen, i tried to restart by pulling battery out but phone displayed "encryption failed" and kept on showing phone.apk stopped working (something similar). so i decided to ODIN to stock and start fresh, this time i tried installed Dandroid 3.8.1 and it worked, so i thought of giving DeTmobilized one more try, but again it got stuck at samsung letters at the boot.
so i decided to stick with Dandroid for a while, but now i cannot install that too. it gets stuck while booting. but if i ODIN to stock everything works fine on stock firmware, its only the custom ROMs that are not working.
i also tried repartitioning using PIT file along with stock md5 hoping that would solve this issue, but it hasnt.
i need help, i cannot stay on stock ROM.
thank you.
Click to expand...
Click to collapse
boot into recovery and wipe cache partition along with davik, that should fix the stuck
also do remember first boot will always take a while
also make sure you're using the latest custom recovery (either twrp or cwm)
i would also like to note here that i tried installing AOSP based ROMs also, and AOKP didnt work, got stuck at nexus like boot animation forever, but when i tried installing CM10.1.2 (which is what i was running when i tried to get back to TW based ROM) it worked perfectly, so for now i am back to CM, but i would really get back to flashing different ROMs and trying them out. just makes me wonder if CM is the reason i am not able to install anything else, just a thought...
has anybody else tried going to any other ROMs from CM 10.1.2?
your help is appreciated!
pcshano said:
boot into recovery and wipe cache partition along with davik, that should fix the stuck
also do remember first boot will always take a while
Click to expand...
Click to collapse
thanks for your reply, but i have tried doing that, i also wipe data and system along with cache and dalvik before installing any new ROM.
pcshano said:
boot into recovery and wipe cache partition along with davik, that should fix the stuck
also do remember first boot will always take a while
also make sure you're using the latest custom recovery (either twrp or cwm)
Click to expand...
Click to collapse
i have latest recovery , TWRP 2.6.0.0 and i have given more than an hour to boot up and still nothing. i have been flashing ROMs like an addict since i got this phone last year, but when CM 10.1 stable was released i stayed on it till today, but now i cannot install any other ROM, i can odin to stock 4.1.1 ROM or install cm 10.1.2 which i did just now, but no other ROM, either TW based on AOSP based is working...which is very weird for me.
Were you able to fix this issue at all? I am facing the same issue, in my case, the phone was encrypted on stock TW. I roooted and put in CM 10.1.2 and now when I try installing Dandroid, the install itself would work but I am struck at the "type password to unlock the screen". If I reflash CM10.1.2, I can login fine. Any pointers?
Well, like the title suggests, I was experimenting with Android 4.3 a bit today, so I've been flashing a few ROMs and then formatting. Anyways, I was done seeing what I wanted to see with 4.3 so I decided to go back to Dandroid, a TW 4.1.2 ROM. I realized I didn't have the DKP kernel on my phone, but I heard that you can use the TWRP mount feature to put files on your phone while you're in recovery mode.
I attempted to do that, but the phone/drive didn't show up so I clicked Unmount only to have TWRP crash and now whenever I try to boot back into custom recovery, the flash screen loads and then it crashes. I tried to reinstall TWRP through Odin but it still does the same thing. Tried removing my SD card to see if that would be the issue, same thing.
I currently have no ROM installed, but I have a Nandroid of MIUI on my SD card. I can also get into Odin just fine. I am downloading the Stock Sprint ROM and will flash that I guess.
Basically, anyone have a suggestion as how I can get my phone running again? I'm currently downloading the stock zip file to flash through Odin and have about 30 minutes left so I figured I'd ask if there was another way to maybe access my Nandroid of MIUI or something. I cannot access my phone though so I cannot enable USB debugging for the Toolkit :\
EDIT: Flashed MD4 Stock Sprint ROM and all is well. Re-flashed TWRP 2.6.0.1 and I can get back into it just fine. Kinda sucked but at least my phone is working lol
davelikestacos said:
Well, like the title suggests, I was experimenting with Android 4.3 a bit today, so I've been flashing a few ROMs and then formatting. Anyways, I was done seeing what I wanted to see with 4.3 so I decided to go back to Dandroid, a TW 4.1.2 ROM. I realized I didn't have the DKP kernel on my phone, but I heard that you can use the TWRP mount feature to put files on your phone while you're in recovery mode.
I attempted to do that, but the phone/drive didn't show up so I clicked Unmount only to have TWRP crash and now whenever I try to boot back into custom recovery, the flash screen loads and then it crashes. I tried to reinstall TWRP through Odin but it still does the same thing. Tried removing my SD card to see if that would be the issue, same thing.
I currently have no ROM installed, but I have a Nandroid of MIUI on my SD card. I can also get into Odin just fine. I am downloading the Stock Sprint ROM and will flash that I guess.
Basically, anyone have a suggestion as how I can get my phone running again? I'm currently downloading the stock zip file to flash through Odin and have about 30 minutes left so I figured I'd ask if there was another way to maybe access my Nandroid of MIUI or something. I cannot access my phone though so I cannot enable USB debugging for the Toolkit :\
EDIT: Flashed MD4 Stock Sprint ROM and all is well. Re-flashed TWRP 2.6.0.1 and I can get back into it just fine. Kinda sucked but at least my phone is working lol
Click to expand...
Click to collapse
I was gonna suggest try flashing TWRP thru odin and see if that works but looks like u went the long route lol... glad it works for u now.
Yea, nextime just reflash your fav recovery through Odin. It has nothing to do with your rom. Glad to see you back up and running.
Hi all, found my old SGH-T989 and I want to turn this phone into my play phone.
I am new to rooting and all and I don't know which versions of what to use. Everytime I mess up, I have to restore the phone back to stock 2.3.6 then upgrade to 4.1.2 via Kies, then try to root and such.
Problem is... I don't know which ROMs, gapps to use and which cwm to use!!! Seems like every guide out there is outdated because I get stuck in a bootloop every single time I try to flash a ROM or I get Error 7...
Any tips?
I just want 4.4.2 at least on my SGH-T989 What are my options? What are your suggestions?
KSmooove said:
Hi all, found my old SGH-T989 and I want to turn this phone into my play phone.
I am new to rooting and all and I don't know which versions of what to use. Everytime I mess up, I have to restore the phone back to stock 2.3.6 then upgrade to 4.1.2 via Kies, then try to root and such.
Problem is... I don't know which ROMs, gapps to use and which cwm to use!!! Seems like every guide out there is outdated because I get stuck in a bootloop every single time I try to flash a ROM or I get Error 7...
Any tips?
I just want 4.4.2 at least on my SGH-T989 What are my options? What are your suggestions?
Click to expand...
Click to collapse
You need to be on 4.1.2 for this to work. I am bit responsible for what happens. You can get 4.1.2 for Odin from samfirmware.com. Download the latest TWRP from here: http://techerrata.com/file/twrp2/hercules/openrecovery-twrp-2.7.1.0-hercules.tar and flash it in Odin. Your phone should reboot. Boot into recovery by powering off your phone and then holding power and the two volume buttons until you hear two vibrations and then hold just the volume buttons until you see a black screen. Release all buttons. Flash @Chainfire's SuperSU in recovery ( http://download.chainfire.eu/452/SuperSU/UPDATE-SuperSU-v2.02.zip) Wipe cache ald Dalvik and reboot. You should be rooted and able to flash any KitKat ROM. AOSPA is a good choice. It is pretty stable.
Sent from my SGH-T989
I just flashed CarbonROM on my sister's phone this weekend. Rooting is not really required.
My process:
Flash TWRP (this was the most difficult of the entire process. It is still relatively easy though). I used Odin to flash the latest TWRP. TWRP provides odin flashable archives so it is really just a matter of knowing how to flash thing using Odin. This does not require root. The CWM wiki page says that Rooting is not required, nor is it the preferred method when flashing a new rom.
You can use Heimdall, but it is very hit and miss with this phone. Odin is much more "reliable" on the T989. I tried Heimdall, but I ended up having to reset my sister's phone because it flashed the recovery incorrectly.
Download the rom of your choice and its associated gapps package. Put them on your sd card
Boot into recovery. You will need to use TWRP's mechanisms to wipe/factory reset the phone. Then wipe cache and dalvik cache.
Install the zip of the rom and then immediately afterward install the gapps package. I usually wipe the cache and dalvik cache again for good measure at this point, but I understand it is not needed.
Reboot the phone. If all went well, it will take awhile to boot, but you will be sitting at the start screen of a brand new shiny rom.
Set it up and start using it. Most roms already come rooted.
The reason rooting isn't required using this method is because the download mode of the T989 essentially gives you root priviledges.
I've used this process on two T989 phones without any error. If you want to backup your phone, do that in step 3 _before_ you wipe/factory reset your phone.
Usually what I do is just use Odin to flash ClockworkMod then copy the ROMS to the sdcard. Boot into recovery then install zip from SD Card, select ROM. If you use CyanogenMod then just select your device and Google search the cyanogenmod gapps
Sent from my SAMSUNG-SGH-T989 using XDA Free mobile app
Hey Guys,
I just got a new Samsung Galaxy S3 SGH-I747 in the mail and I immediately started to install Cyanogenmod. I have installed it on two S3's in the past, but this time I had no idea about the new bootloader problems after Android 4.3 (I think?). I got CWM touch installed with no problems via Odin, but when I tried to use the Unified Android Toolkit thing to root and stuff I got stuck in a boot loop. The phone would not boot past the Samsung logo, not the animated one with the purple light, but the one that shows the phone model.
I have tried everything I could think of and all that I tried to google for the past couple hours to no avail. I stupidly did not make a backup of my stock ROM, and I couldn't find a stock 4.4.2 ROM except this one that says it is stock but with root. I flashed that ROM and then it booted past the Samsung logo and the animated one, but is now stuck on the AT&T logo. I looked up that problem and couldn't find any real information on that problem except one thread where it said I should install Kies and let it do the Firmware Upgrade and Initialisation option. That failed and then my phone would only turn on straight to download mode.
I reflashed CWM and that worked so I thought that if I tried to install Cyanogenmod 11 it might work because that ROM is 4.4.1 or higher (Again, I think?). Now it's back into the loop where it makes it past the samsung stuff but then gets stuck on the AT&T logo. Is there anything I can do?
Thanks,
Jemimacakes
Did you try wiping cache, data, and Dalvik in CWM?
Did you try installing CM10.2 from CWM?
audit13 said:
Did you try wiping cache, data, and Dalvik in CWM?
Did you try installing CM10.2 from CWM?
Click to expand...
Click to collapse
Yes, I have tried clearing stuff in both CWM and stock recovery. Im not sure about the Dalvik one though, unless that is cleared when you do factory reset and clear cache I didnt do it. I can try flashing CM10.2 ( which I would prefer to have over 11), but my understanding is that my boot loader will not let me install anything that uses any lower versions of android, but I'll give it a shot and let you know.
Ok guys,
I tried to install Cyanogenmod 10.2 and when I put it on my sd card and tried to install it with CWM It threw and ton of errors that look like this.
assert failed: getprop("ro.bootloader") == "I747UCDLK3" || getprop("ro.bootloader") == "I747UCDMG3" || etc etc.
Im not super experienced with programming, but im guessing that CM10.2 can find any bootloader it can use? Im not sure what my bootloader is if that is the case, but I can boot into recovery so I must have something, right?
Anything I can do?
Thanks
Jemimacakes
You should try flashing cm10.2 just to see if you can get your phone to boot. By booting the phone, you can determine your bootloader and modem.
Edit: okay, cm10.2 doesn't work. Are you running the latest version of cwm? Maybe try twrp?
Hey,
I did have the latest version of CWM, but I tried it on TWRP and got the same errors
audit13 said:
You should try flashing cm10.2 just to see if you can get your phone to boot. By booting the phone, you can determine your bootloader and modem.
Edit: okay, cm10.2 doesn't work. Are you running the latest version of cwm? Maybe try twrp?
Click to expand...
Click to collapse
Hey,
I have now tried both custom recoveries and gotten the same errors on both, and I made sure I had the latest version of each. Can I flash the firmware from 4.3 and then install CM10.2? Will that work? I really don't want to hard brick my phone.
EDIT: I installed ADB to find out what my bootloader was, and it returned that I had the NE4 version. Is there a way to get the MJB version safely so I can install 10.2?
At this point I just want it to boot up to anything, so if that is easier to do than get CM to work then im completely open.
You cannot go back to MJB from NE4.
How did you try to install CM the first time? Did you use the install manager or a custom recovery?
The last time I installed CM on a i747 was back when the phone was on 4.1.1. The second phone I installed it on was the international version of the phone, also on 4.1.1. I used a custom recovery both times. I bet if I would have used the new installer on this phone it would have worked, but I was trying some other stuff because I was curious and ended up breaking it.
IT BOOTED!
I reflashed the stock firmware + root, reinstalled stock recovery and wiped everything I got it to boot into its stock ROM. From this point, where do I go? Will the CM installer work or will it just brick it again?
Thanks
Jemimacakes
I would copy a custom rom such as cm11 to the internal and external sd card.
I would then download the latest version of philz touch for the d2lte. Get Odin 3.07. Put the phone in download mode, open Odin, uncheck all options except f reset time. Flash philz, when you see reset in the status window, remove USB cable, remove battery, insert battery, boot into recovery, create a nandroid of your current rom, flash cm11, wipe cache, wipe data, wipe dalvik, reboot.
audit13 said:
I would copy a custom rom such as cm11 to the internal and external sd card.
I would then download the latest version of philz touch for the d2lte. Get Odin 3.07. Put the phone in download mode, open Odin, uncheck all options except f reset time. Flash philz, when you see reset in the status window, remove USB cable, remove battery, insert battery, boot into recovery, create a nandroid of your current rom, flash cm11, wipe cache, wipe data, wipe dalvik, reboot.
Click to expand...
Click to collapse
Which version of CM11 should I get. On the site I see that the last version of CM11 for the I747 (d2att) was released on feburary 16, is this one based on 4.4.2?
EDIT: Also, I should copy CM11 to both the internal and external storage? Why is this?
You should be using roms made for the d2lte.
I suggest both because cwm or twrp may see one but not the other. This doesn't usually happen but I am always paranoid about something going wrong as flashing always involves risk and I like to minimize risks and be prepared for disaster.
audit13 said:
You should be using roms made for the d2lte.
I suggest both because cwm or twrp may see one but not the other. This doesn't usually happen but I am always paranoid about something going wrong as flashing always involves risk and I like to minimize risks and be prepared for disaster.
Click to expand...
Click to collapse
Alright, but I have the at&t version of the phone. Are they both compatible with one another?
EDIT: OK, correct me if im wrong, but my new understanding is that CM now has releases for general versions of phones, so the most recent update of CM for my phone is the d2lte, not d2att?
Before unified builds for the msm8960 were started, the i747 was known as the d2att and the i747m was known as the d2can.
audit13 said:
Before unified builds for the msm8960 were started, the i747 was known as the d2att and the i747m was known as the d2can.
Click to expand...
Click to collapse
Hello again,
Thanks a ton Audit, my phone is up and running with the latest cyanogen nightly! A recap for anyone who might come across with a similar problem.
1. I installed a ROM using an older version of android onto a phone with the new bootloader (NE4), softbricking it.
2. I installed the stock ROM + root from this link using Clockworkmod
https://www.androidfilehost.com/?fid=23501681358550126
3. Installed the stock Recovery from this link and did wiped my data and both caches
https://www.androidfilehost.com/?fid=23681161096070493
4. I rebooted the phone and waited at the AT&T logo for a while, and it booted up normally!
5. I installed the most recent version of Philz Touch Recovery for the d2lte, made a nandroid for safety, and then install the latest nightly of CM11 for the d2lte.
6. It works!
Thanks again to Audit for helping me out!
Jemimacakes
I'm glad it all worked and I was able to help in some way.
It's great that you posted your solution in case it helps other people in a similar situation.
I think i'm in a similar place - a few questions. You used cwm to install the stock ROM? I thought you needed to use odin. Also, why did you need to install the stock recovery (and did you just flash the .zip in cwm)? Also, that stock rom you linked to is 4.4, right? Would that work if I was on 4.3?
Before flashing anything, I suggest you confirm your bootloader and modem. Flashing the wrong combination of modem and bootloader could hard brick your phone.
If your phone does not boot, try flashing Philz Touch for the d2lte and flash the latest cm11. Hoepfully, this will get your phone running so you can confirm the bootloader and modem. CM11 does not flash a modem or bootloader.