Hi,
i have just tried to charge my Tab3 7.0 with the chragers i have available to charge my Samsung Note II and Ipad 2.
Both Note 2 and Ipad can be charged with Apple charger and a chinese charger with 4 USB ports. The Tab 3 cannot
be charged with those, one has to use the charger which came with the tab.
Both the Apple as well the chinese charger supply 2A so it should also be enough for the Tab 3.
Any hints on that ? Is the Tab3 somehow detecting the type of charger ? (i dont think so)...
It is also not the maximum amps as only the required current (which is lesser than maximum) is drawn ...
Regards
Joachim
Mine charges on the charger from my galaxy s3 which is a 1a charger. I have several others I can try I'll post later.
Mine wont charge when i connect it to the pc, but all my normal charger can charge it. Wery strange..
yeah its strange. The Apple charger is also 2A. and doesnt charge my tab 3..
Sent from my SM-T210 using xda app-developers app
Mine does not charge with my computer when I plug it at first. BUT
if I go to my MB software (ASUS Sabertooth Z77) there is this FAST USB charging option that once enabled recognizes my TAB and the TAB itself starts charging
Areos said:
Mine does not charge with my computer when I plug it at first. BUT
if I go to my MB software (ASUS Sabertooth Z77) there is this FAST USB charging option that once enabled recognizes my TAB and the TAB itself starts charging
Click to expand...
Click to collapse
That obviously just helps for charging from PC via USB, but most of us have AC chargers with us.
batman08 said:
That obviously just helps for charging from PC via USB, but most of us have AC chargers with us.
Click to expand...
Click to collapse
And I was talking about the user that said that he could not charge his TAB from PC.
batman08 said:
Hi,
i have just tried to charge my Tab3 7.0 with the chragers i have available to charge my Samsung Note II and Ipad 2.
Both Note 2 and Ipad can be charged with Apple charger and a chinese charger with 4 USB ports. The Tab 3 cannot
be charged with those, one has to use the charger which came with the tab.
Both the Apple as well the chinese charger supply 2A so it should also be enough for the Tab 3.
Any hints on that ? Is the Tab3 somehow detecting the type of charger ? (i dont think so)...
It is also not the maximum amps as only the required current (which is lesser than maximum) is drawn ...
Regards
Joachim
Click to expand...
Click to collapse
Hi I was wondering if u ever found out why the tab 3 wouldn't charge with other chargers. I have my note 2 charger and didn't work and I bought a cheap charger on ebay and was crap, didn't charge. Do I have to buy the original cable to make it charge?
I will try is maybe the input voltage since the stock charger is 2000mAh. I will try with a 7th charger I've laying around somewhere
Sent from my GT-N7100 using Tapatalk 4
batman08 said:
Hi,
i have just tried to charge my Tab3 7.0 with the chragers i have available to charge my Samsung Note II and Ipad 2.
Both Note 2 and Ipad can be charged with Apple charger and a chinese charger with 4 USB ports. The Tab 3 cannot
be charged with those, one has to use the charger which came with the tab.
Both the Apple as well the chinese charger supply 2A so it should also be enough for the Tab 3.
Any hints on that ? Is the Tab3 somehow detecting the type of charger ? (i dont think so)...
It is also not the maximum amps as only the required current (which is lesser than maximum) is drawn ...
Regards
Joachim
Click to expand...
Click to collapse
1> Few Phones has support for USB charging via a PC. TAB 3 has no support for USB charging.
It does charge very very slowly if u dont use it for a long time while being connected to the USB port.
2> There may be some +- voltage problem with non stock chargers. Its actually not recommended to charge with non stock chargers. Damages the battery.
Hi
I charge My Tab3 with the note2 charger 2 amp. normally.
It take 2.5 hrs tobe fully charged ...
Its stock charger 1 amp take more than 4 hrs.
thx
Related
Recently, my sgn n7000 charger(1yr old) got damaged.
I am looking to buy new charger of same model, but after searching a lot, i coudnt find a new genuine charger online, most of them are boxed and loosely packed.
i got some gud deal for a charger but its 700ma, it will take a lot of time to charge..
While searching, i got at these product
http://www.ebay.in/itm/Buy-Online-S...?pt=IN_Mobile_Accessories&hash=item3384a4ebb8
but on the samsung website, the note n7000 is not in the compatible list.
i wanna know, will it charge my note properly or not. Will i t damage my battery..!
or else pls give some link whr i can get genuine charger.
charger
The charger looks like an indian version of the one my daughter received with her galaxy s4. White is the colour of her phone and the colour of her charger, it also was 5v at 2A. To my knowledge the charging of the battery within the phone is controlled by the phone and as long as it is supplied with its minimum requirement of 5v. it will charge at whatever current it can within the control of the power management in the phone.
Hope this helps ? I did look at the samsung website in india and they had power units for sale. I dont know where you are ?
Samsung India has 700ma chargers listed..
And do u charge ur note with that one..? Us thr any problem.?
charger
No mine is a 5v 1A samsung charger. I also have an incar charger which is a standard usb charger for any make of phone and that supplies 5v at 1A. I also have a Yiboyaun unit from china which charges just the battery, I have 3 additional batteries I use and charge with this unit from china. I have had this setup for more than a year with no problems.
You can charge N700x with the Note 2 charger (which puts out max 2A). It charges slightly faster than the original Sammy 1A charger/cable. It's perfectly safe because the phone will not take in more current than it's configured.
seowphm said:
It charges slightly faster than the original Sammy 1A charger/cable. It's perfectly safe because the phone will not take in more current than it's configured.
Click to expand...
Click to collapse
If it charges faster than 1A its not limiting the input. The note 1 battery is made for 1A chargers. Using 2A will limit the life span of the battery.
I've had some trouble charging my new tablet.
When I first received the tablet, I plugged it in to the supplied cable and allowed it to charge to 100%.
I used it for a day to run the battery down.
I then left it plugged in to the computer with a standard cable for 11 hrs.
It appears that it didnt charge at all.
Now I drove all the way back to my office to test it again with the factory supplied cable and it does appear to be charging slowly but it is totally discharged.
I've experienced intermittent issues with charging. Seems like it prefers but doesnt require the samsung charger/cable. Are the voltages and everything the same?
Yeah, seems like it wont charge on a usb port. Only seems to rocognize the supplied samsumg charger...
Apache0c said:
Yeah, seems like it wont charge on a usb port. Only seems to rocognize the supplied samsumg charger...
Click to expand...
Click to collapse
Do you see that the battery icon has a red X over it when you have it plugged into the computers USB port. The tablet needs the power that the supplied Samsung charger puts out to charge that big battery.
On page 9 of the users manual it says "Note: You cannot charge the battery using the USB cable and
your PC"
.
so is it just a 2A usb charger?
When it's got the red cross over the battery symbol (when it's plugged into a computer USB or car charger etc) it does still charge, but very slowly. Probably only with the screen off.
Apache0c said:
Yeah, seems like it wont charge on a usb port. Only seems to rocognize the supplied samsumg charger...
Click to expand...
Click to collapse
It charges with any standard charger. I use non-samsung charger and it charges fine, in fact I have not removed the original charger from the box.
As with USB it does charge but really slowly, while it shows not charging.
I believe that a standard USB is 1A and the note 2014 is 2A. Can anyone confirm?
Apache0c said:
I believe that a standard USB is 1A and the note 2014 is 2A. Can anyone confirm?
Click to expand...
Click to collapse
Yes, this is correct, my standard Galaxy S4 is 1A, however a computer may put out even less than this.
Apache0c said:
I believe that a standard USB is 1A and the note 2014 is 2A. Can anyone confirm?
Click to expand...
Click to collapse
No. Standard USB 2 port supplies 0.5A. USB 3 port will supply like 1.5A or less. As for USB 2, you may install (if motherboard supports it) ASUS Ai Charger so that it supplies 1A.
I have gigabyte mb and it has its own driver to over supply usb 2 current. With that I have about %6/hour charging rate if screen is off. Using Samsung own charge, I got about %24/hour.
PS: Look like my desk usb 2 port supplies .5A only (%6x4=%24).
GinTMonster said:
Yes, this is correct, my standard Galaxy S4 is 1A, however a computer may put out even less than this.
Click to expand...
Click to collapse
I think you're right. I'm using a 2.1A CostCo Charger and it seems to be charging the 2014 P-605 perfectly.
howard30 said:
No. Standard USB 2 port supplies 0.5A. USB 3 port will supply like 1.5A or less. As for USB 2, you may install (if motherboard supports it) ASUS Ai Charger so that it supplies 1A.
I have gigabyte mb and it has its own driver to over supply usb 2 current. With that I have about %6/hour charging rate if screen is off. Using Samsung own charge, I got about %24/hour.
PS: Look like my desk usb 2 port supplies .5A only (%6x4=%24).
Click to expand...
Click to collapse
Not to be rude, but what you wrote here makes no sense to me .
i got the charging issue also, with original charger 2A, original USB cable
checking with galaxy current, value at 900mA
my tablet charges perfectly with original charger and cable but using every standard usb charger (2A and 700mA) it charges but the "connection" is unstable: it's like usb is connecting and disconnecting repeatedly.
I've checked every connection, using the same charger and cable with another phone the connection is stable.
Anyone with the same issue?
(rom xKat on P605)
Hi Guys,
I'm just wondering if my unit is defective or it's really the case for Galaxy Note 8's. My tablet charges just fine when using the wall charger, but when I connect it to my PC, it won't charge at all. I've tried different cables that I use for my phone and other gadgets, but none of them will work.
Is there a way for me to make it charge via USB?
Grawrz said:
Hi Guys,
I'm just wondering if my unit is defective or it's really the case for Galaxy Note 8's. My tablet charges just fine when using the wall charger, but when I connect it to my PC, it won't charge at all. I've tried different cables that I use for my phone and other gadgets, but none of them will work.
Is there a way for me to make it charge via USB?
Click to expand...
Click to collapse
Mine also says not charging when its plugged to the PC, its because the USB ports supposedly don't give enought current to charge the tablet, but i once left it connected overnight while transfering my MP3 collection and in the morning the tablet was 100% charged, so i think even if it says is not charging, it charges but ultra slow, even slower than a cell phone.
USB ports on a PC does not put out enough voltage to charge the tab. Like said above, if it does, it will take forever. Look on the back of your wall charger. It should say 10v. USB ports typically put out only 5v. If you look on the back of a phone charger, it should be 5v.
Sent from my GT-N5110 using Tapatalk
cavsoldier19d said:
USB ports on a PC does not put out enough voltage to charge the tab. Like said above, if it does, it will take forever. Look on the back of your wall charger. It should say 10v. USB ports typically put out only 5v. If you look on the back of a phone charger, it should be 5v.
Sent from my GT-N5110 using Tapatalk
Click to expand...
Click to collapse
It's not the volts, it's the amps. Your charger provides 2A. A typical USB port provides 0.5A. But in any case, you'll not be able to charge this device from a computer USB port. It's not a fault in the device.
That explains it then. Thanks guys :laugh:
Hmmm... I alway charge my note 8.0 thru my pc usb.
It charges on my pc and lap top.
If you want to be sure just let is sit for an hour and see if the % went up.
Doesnt charge fast but charges in an evening from 60 to 100%
Perhaps it doesn't charge while the screen is on, because the power drain exceeds the charge rate? There would be no way to see it change to "charging" because the screen must be off for that to happen... Just some speculation
Sent from my SPH-L710 using Tapatalk
I have a HP Envy M6 laptop that I use to charge my Note 8. It only charges on the port closest to the battery. The only USB 2.0 port out of 3 other USB 3.0 ports which is odd because they say USB 3.0 ports give out more power.
I have tried charging it with another HP laptop that has the same USB setup but it doesnt charge in any one of the ports, 2.0 or 3.0.
I guess it just depends on the PC you're charging it with.
Can charge.
hi,
We can charge note 8, if the note is switched off and connected to a PCvia USB
Normally Note 8.0 can not charge with pc usb port or car usb port because AC current of them too low only 0.5A (minimum AC current of charging require should be 1A)
Samsung Tablet stock charger is 2.1A (Note 8.0 device allows 1.8A)
Hi
I have the Tab Pro 8.4 since yesterday.
Today i noticed that charging over USB is not working. I get a red cross in the Battery Symbol.
Anybody with the same Problem?
Hello.
If you mean charging by other charger than original, it's normal.
All Samsung Tab need original charger or compatible charger (mean mentioned "for Galaxy Tab").
Samsara69 said:
Hello.
If you mean charging by other charger than original, it's normal.
All Samsung Tab need original charger or compatible charger (mean mentioned "for Galaxy Tab").
Click to expand...
Click to collapse
no I mean charging on the USB Port with a normal Micro USB Cable. I have one here from a Galaxy S2 or S3 and with them it doesn't work.
It requires 2amps to charge while the screen is on. The other chargers are probably only providing 1amp so while screen is on it is not charging.
phage80 said:
It requires 2amps to charge while the screen is on. The other chargers are probably only providing 1amp so while screen is on it is not charging.
Click to expand...
Click to collapse
once again, i dont use the charger, it is connected to the USB Port from my Computer!!!! Normaly a Device like the Nexus 7 is charging wenn connected over USB, the Tab Pro 8.4 not.
Then it is the same issue.
A computers USB ports only output 500ma for usb 2.0 devices unless the machine has a piece of software designed to tell it to send more over the port.
It is still not the 2 amps required to charge the device while the screen is on, it should still slowly charge with the screen off.
The nexus 7 probably has a lower power draw allowing it to charge at 500ma with the screen on.
moz2k12 said:
no I mean charging on the USB Port with a normal Micro USB Cable. I have one here from a Galaxy S2 or S3 and with them it doesn't work.
Click to expand...
Click to collapse
It's what i mean.
You cannot use another charger or computer USB port than original or compatible for recharge Galaxy Tab.
It's not a question of intensity ,Galaxy Tab wait for signal on +-DATA pin .
Original charger has 2 resistors between +-DATA for be recognized by Galaxy Tab.
You can use a special USB dongle for recharge at any USB port http://dx.com/p/usb-charging-adapter-for-samsung-galaxy-tab-black-151322
Samsara69 said:
It's what i mean.
You cannot use another charger or computer USB port than original or compatible for recharge Galaxy Tab.
It's not a question of intensity ,Galaxy Tab wait for signal on +-DATA pin .
Original charger has 2 resistors between +-DATA for be recognized by Galaxy Tab.
You can use a special USB dongle for recharge at any USB port http://dx.com/p/usb-charging-adapter-for-samsung-galaxy-tab-black-151322
Click to expand...
Click to collapse
That su...., never seen this on other brands!
Same for iPad and somes Asus Transformer.
I found right now that it is charging also when there is the red cross in the battery symbol
moz2k12 said:
I found right now that it is charging also when there is the red cross in the battery symbol
Click to expand...
Click to collapse
Are you sure?
If you switch off the Galaxy Tab, it charge under computer USB,otherwise not.
Here the user manual
http://downloadcenter.samsung.com/c...axy_Tab_PRO_KK_English_User_Manual_NAC_F2.pdf
Page 7
Samsung said:
Note: You cannot charge the battery using the USB cable and
your PC
Click to expand...
Click to collapse
Out of stock
Samsara69 said:
It's what i mean.
You cannot use another charger or computer USB port than original or compatible for recharge Galaxy Tab.
It's not a question of intensity ,Galaxy Tab wait for signal on +-DATA pin .
Original charger has 2 resistors between +-DATA for be recognized by Galaxy Tab.
You can use a special USB dongle for recharge at any USB port
I looked at that link and this item is out of stock. Does anyone know if/where there are other suppliers who might make or sell something like this?
Click to expand...
Click to collapse
You can build it, just need two resistors http://forum.xda-developers.com/showthread.php?t=975558
Or buy here http://www.ebay.com/itm/USB-car-wal...laxy-TAB-2-7-0-GT-P3113-Tablet-/190703274313m
http://www.china-cell-phone-accesso...or-samsung-galaxy-tab-p1000-p1010-p-1608.html
Cheaper http://www.ebay.com/itm/USB-car-wal...msung-Galaxy-TAB-Switching-2-1A-/321169666171
Since most third party chargers don't work anymore with the KitKat update, did anyone try an external battery?
All chargers works, just depends on cable and not chargers or kitkat. You get faster(slwoer charging depends on charger and quality of the cable.
For u question, I used Trent 11000 mah external battery pack, 5V 1Amp and with 3rd part usb cable, that are only for charging, without "data pins". It charging at 500 mah when screen is on, screen off at 930-980 mah and working as normal.
I dont know where u get that kitkat have anything to do with 3rd part chargers doesnt works.
dt33 said:
All chargers works, just depends on cable and not chargers or kitkat. You get faster(slwoer charging depends on charger and quality of the cable.
For u question, I used Trent 11000 mah external battery pack, 5V 1Amp and with 3rd part usb cable, that are only for charging, without "data pins". It charging at 500 mah when screen is on, screen off at 930-980 mah and working as normal.
I dont know where u get that kitkat have anything to do with 3rd part chargers doesnt works.
Click to expand...
Click to collapse
Well my third party chargers stop charging when the screen turns off. Even if I use the USB cable that came with the Note. However, old chargers of HTC or Motorola phones do work with any USB cable. And I have read this from several other users as well.
I'm on stock 4.4.2 with stock recovery. What recovery/kernel/ROM do you use?
I only use third party chargers and cables and have never had a problem.
Razorless said:
Well my third party chargers stop charging when the screen turns off. Even if I use the USB cable that came with the Note. However, old chargers of HTC or Motorola phones do work with any USB cable. And I have read this from several other users as well.
I'm on stock 4.4.2 with stock recovery. What recovery/kernel/ROM do you use?
Click to expand...
Click to collapse
The problem is Samsungs OEMs usb cable. I found it kinda weird, probably Samsungs have some kinda "handshake" with data pins and I got few of them from old Note 1/2/2014 and somehow it doesnt charge mine old Note 2 anylonger.
I got 4 of Samsunsg OEMs USB cables that comes along with Note 1/2/2014/EED100 (Desktop chagerstand) and I dont know anylonger which one is for each device. If I use wrong Samsungs usb cable, it charge mine Note 2 very slow, battery also drops while charging and I got to pick right usb cable for it to charge normal.
Now I just use this usb cable to charge mine Note 2014, too lazy to swap cable until find correct one and it works fine with any charger.
http://www.ebay.com/itm/PortaPow-Hi...ories_MobilePhoneChargers&hash=item4ac6919243
Mine Note 2014 is rooted with stock recovery/kernel (4.4.2 HK version)
TabGuy said:
I only use third party chargers and cables and have never had a problem.
Click to expand...
Click to collapse
That's really intersting. Are you on stock ROM?
dt33 said:
The problem is Samsungs OEMs usb cable....
Mine Note 2014 is rooted with stock recovery/kernel (4.4.2 HK version)
Click to expand...
Click to collapse
I tried using the Note charger with different USB cables and it works. Using third party chargers with Note cable does not work, but using HTC/Motorola chargers with any cable does. So I think the problem is with the charger, not the cable. Are you sure you used the Note charger with diferent cables and it didn't work?
Using a 1.0A charger charges the device obviuosly slower but the third party chargers (also 1.0A) stop when the screen is off or the device is powered down.
Razorless said:
That's really intersting. Are you on stock ROM?
Click to expand...
Click to collapse
Yes
I use a limeade 16000mah battery and have never had a problem with it not charging.
Alright, I'm now officially out of ideas why this only affects some devices. Would you mind telling me what model you have?
Mine is a 605 LTE
Razorless said:
Alright, I'm now officially out of ideas why this only affects some devices. Would you mind telling me what model you have?
Mine is a 605 LTE
Click to expand...
Click to collapse
SM-P600
Might be it's a bug in the 605 ROM/kernel. Or maybe related to the snapdragon 800 chip. Maybe Samsung screwed up some drivers, intentionally or not.
If anyone is having charge issues, change your cables. There's nothing special about a "Samsung" cable, but there's a lot of cheap cables out there that have enough voltage drop on them that they won't allow adequate charging. Also, make sure your charger is doing "AC" charging, not "USB" charging- the Note won't draw more than 500mA from USB charging and you may either experience slow charging or none at all if you're using it.
I'm running a P607T (US T-Mobile) model with the German P605 ROM (which should rule out "locale" differences), and my Note charges from any third-party charger I have and/or my Gorilla Gadgets charger battery just fine, whether screen is on or off.
Like I said before, my third party charger stops charging when the screen turns off, even if I use the cable that came with the Note. In settings under battery it says "charging - AC" but still.
It may very well be that these chargers are too "cheap".
The Samsung cable misses one of the two ground connectors. This method was used for devices with mini (!) usb to put them either in power or data transfer mode, depending on the cable used.
However, the Note don't care, I charge it with a 5pin-cable.
The charger should be fully Android - and Apple compatible, as the Note most likely checks for Ipad-compatible signals on the data lines for 2A support.
The USB Port of the P600 is really weird.....I`m searching a long time for a solution to use USB and charging at the same time, and I`m testing a lot of dockingg Stations for this.....thats really strange.....the Multimedia Dock, made for the Note 2, works with the Note 3, without Problems, alll Ports are working....but P600 doesnt accept it as any docking stations, it do absolutely NOTHING, if you put it in.....with the new desktop dock (without usb) both devices will accept it as an "Docking Station"...other Adapters, like Hama, with SD Card Reader, USB and micro USB, will accept as an USB connector, all works, but not charging......but now, the LAN to USB Adapter from Samsung for the PRO Tab Series, wich have 2 x USB, LAN and Charging Inputs, works fine, except the LAN Port......think, there no drivers there at P600.....The USB Port is not same pinned as the Note 3, and also not same as the Note 10.1 and other older Tabs.......maybe it`s same pinned as the PRO Series.....but not sure......
Gesendet von meinem SM-P600 mit Tapatalk