is there a way we could use light sensor as a proximity sensor. I saw some thing like this for hero ? .
Im on CM7.1 RC1
Why would you want to? The DHD has both already and seperate.
raze599 said:
Why would you want to? The DHD has both already and seperate.
Click to expand...
Click to collapse
Cause i have encountered multiple times the proximity sensor fails to work.... tried the proximity sensor config app multiple times on multiple rom's/multiple kernels ! and it works for some time but then starts failing after some time.. I know its not my hardware fault as it is a new mobile.
Did it work properly on the stock ROM? Even new handsets can develop faults.
raze599 said:
Did it work properly on the stock ROM? Even new handsets can develop faults.
Click to expand...
Click to collapse
Yup it did
Hi, Iam in Viperx v2.7.1. The proximity sensor is not working in this. Can anybody advice me?
greatervoice said:
Hi, Iam in Viperx v2.7.1. The proximity sensor is not working in this. Can anybody advice me?
Click to expand...
Click to collapse
What is your hboot version?
Sent from my EndeavorU
Hi
My hboot is 1.12
Then your problem could be from a bad flash(reflash the latest version of the rom)
Sent from my EndeavorU
Did it work perfectly before flashing the ROM?
Mine's currently getting it's proximity sensor fixed. It was hardware related...
Actually I bought four months old phone. I have not checked at the time of purchasing. After rooting and flashing custom rom proximity sensor is worked where weak. From two days onwords it is not yet all working. So, please anybody advise me. I checked two other custom roms also. But no use.
peedub said:
Did it work perfectly before flashing the ROM?
Mine's currently getting it's proximity sensor fixed. It was hardware related...
Click to expand...
Click to collapse
Actually I bought four months old phone. I have not checked at the time of purchasing. After rooting and flashing custom rom proximity sensor is worked where weak. From two days onwords it is not yet all working. So, please anybody advise me. I checked two other custom roms also. But no use.
Proximity Sensor Finder from the play store can help.
I found that when I squeezed the phone just below the camera, the sensor would work temporarily. It seems it's not an uncommon fault.
Hi,
I am using Viperx 4.0.7 now but i have a problem that when i call, screen goes instantly off and not on until i press the power button. And also red light of proximity sensor stay on all time. I flash new rom to solve this... done hard reset but not solved.
Please help me...
when i flash android 4.4.2 ROMs, i did't get any this kind of problem.
This is happen only with Viperx Rom only..
Did u try Rezound Proximity Sensor Ca|ibrator from P|ay Store?
Play with the settings-PS1-CANC whi|e moving hand over proximity sensor .
Turn off sense rotation in the homescreen tab of the tweaks app if it's enabled ?
Sent from my HTC One X using XDA Premium 4 mobile app
pepifness said:
Did u try Rezound Proximity Sensor Ca|ibrator from P|ay Store?
Play with the settings-PS1-CANC whi|e moving hand over proximity sensor .
Click to expand...
Click to collapse
Yes this help me to solve problem but in this software we need rapidly calibrate sensor daily for solution.
I have seen some reviews about the issue of proximity sensor and turning on the screen during calls ,
Did Xiaomi solve it ?
or
I want to ask if this issue is severe .
sorry for my bad english
thanks in advance
I didn't have any issue with proximity sensor, others say they did... Sincerely i think that they're just holding phone against their head wrong while talking...
Issue exist. Wife and son have problems with screen turning on and off. I watch them while talking. Without any movement of cell phone or head, screen turns on. So, calinorg, you are wrong.
sudy said:
Issue exist. Wife and son have problems with screen turning on and off. I watch them while talking. Without any movement of cell phone or head, screen turns on. So, calinorg, you are wrong.
Click to expand...
Click to collapse
In settings there is an option to turn the proximity sensor on and off
nesoler said:
In settings there is an option to turn the proximity sensor on and off
Click to expand...
Click to collapse
Realy? And you think that I don't know that! C'mon!
sudy said:
Issue exist. Wife and son have problems with screen turning on and off. I watch them while talking. Without any movement of cell phone or head, screen turns on. So, calinorg, you are wrong.
Click to expand...
Click to collapse
You just might be right... I started having some issues with proximity sensor lately, so i believe it could be dirty sensor...
sudy said:
Realy? And you think that I don't know that! C'mon!
Click to expand...
Click to collapse
Excuse me, I just wanted to help
nesoler said:
Excuse me, I just wanted to help
Click to expand...
Click to collapse
how can i do that or where is this option , i don't know about it frankly
Mohamad Gahed said:
how can i do that or where is this option , i don't know about it frankly
Click to expand...
Click to collapse
Call settings/incoming calls
Hi, you can try to calibrate the sensor by tapping several times on kernel version in Settings and see if it works.
Good luck,
zaqm
zaqm said:
Hi, you can try to calibrate the sensor by tapping several times on kernel version in Settings and see if it works.
Good luck,
zaqm
Click to expand...
Click to collapse
It works
calinorg said:
I didn't have any issue with proximity sensor, others say they did... Sincerely i think that they're just holding phone against their head wrong while talking...
Click to expand...
Click to collapse
I think I've heard somewhere that there is a slight problem with the proximity sensor but that was due to it being ultrasonic rather than infrared. I'm not sure but may be that might be the reason.
hi all,
I have a Mi 10T, Indian version(MIUI Global 12.0.5.0 Stable). I have faced this issue from time to time too.
I did something that helped, I cleaned the LED indicator light hole and ear piece opening, using a bubble gum(please watch a few youtube videos on how to do that and do not get any residue of gum stuck in). Then as said above calibrated the sensor from kernel version settings.
Before the clean up, 6/10 calls I faced this nagging issue. Post clean up, its like 1/10 calls , and mostly that one call is usually whatsapp voice call this happens with and not the google phone app.
hope this helps you guys too.
EDIT : P.S. Are people with stock MIUI dailer/phone and messaging app facing this issue too? Kindly mention your phone's ROM version, I am planning to Install Indonesia version of stock MIUI Rom for my device, to get back Stock MIUI Dialer/Phone and messaging app.
Also, I kind of have a feeling that Google phone and messaging app are not optimised for MIUI ROM and/or this device.
yeeshanpocof1 said:
hi all,
I have a Mi 10T, Indian version(MIUI Global 12.0.5.0 Stable). I have faced this issue from time to time too.
I did something that helped, I cleaned the LED indicator light hole and ear piece opening, using a bubble gum(please watch a few youtube videos on how to do that and do not get any residue of gum stuck in). Then as said above calibrated the sensor from kernel version settings.
Before the clean up, 6/10 calls I faced this nagging issue. Post clean up, its like 1/10 calls , and mostly that one call is usually whatsapp voice call this happens with and not the google phone app.
hope this helps you guys too.
EDIT : P.S. Are people with stock MIUI dailer/phone and messaging app facing this issue too? Kindly mention your phone's ROM version, I am planning to Install Indonesia version of stock MIUI Rom for my device, to get back Stock MIUI Dialer/Phone and messaging app.
Also, I kind of have a feeling that Google phone and messaging app are not optimised for MIUI ROM and/or this device.
Click to expand...
Click to collapse
It has nothing to do with Google phone app, sensor is ultrasonic and it is a bit iffy from time to time...
Atasal said:
I have seen some reviews about the issue of proximity sensor and turning on the screen during calls ,
Did Xiaomi solve it ?
or
I want to ask if this issue is severe .
sorry for my bad english
thanks in advance
Click to expand...
Click to collapse
Him I have the very same issue.
Let's admit, Xiaomi note 8 pro is ****.
I've proximity issues and headphone connector issues.
The phone price is great, the quality is not there. Simply it's a big nightmare .
What a big disappoinment.
The issue exists for sure. What a piece of garbage is this phone. :-(
at home the problem appears when I switch the screen to 120hz and disappears at 60hz, it is the 120hz mode that causes concern the infrared sensor does not follow
I want to buy this phone, but I read somewhere that it have some proximity sensor bugs, is it true? Are there more bugs? It's worth it?
there is no proximity sensor so it doesn't work properly.
A have one bug with BT connections w Navi BMW. After turning off the car, it does not remember the connection and you have to connect again
tracer123 said:
there is no proximity sensor so it doesn't work properly.
A have one bug with BT connections w Navi BMW. After turning off the car, it does not remember the connection and you have to connect again
Click to expand...
Click to collapse
The bt problem is ok, i don't have a car, but I hope the Proximity sensor to work..
tracer123 said:
there is no proximity sensor so it doesn't work properly.
A have one bug with BT connections w Navi BMW. After turning off the car, it does not remember the connection and you have to connect again
Click to expand...
Click to collapse
I think there is a magisk module made for Samsung for that problem, maybe it will work for this phone too?
Rares6567 said:
I think there is a magisk module made for Samsung for that problem, maybe it will work for this phone too
Click to expand...
Click to collapse
I found a solution, in the developer settings you need to set these settings to default
tracer123 said:
I found a solution, in the developer settings you need to set these settings to default
Click to expand...
Click to collapse
Ok. Maybe this will help someone.