Related
i install cygwin
i type cd /boot
and when i type ./extractboot boot.img the cygwin say something about cpio acces denied, and about perl
Plese help
Sent from my GT-S5660 using Tapatalk 2
Install dsixda kitchen
And use bootimg tools
Sent from my GT-S5660 using xda app-developers app
You'll need Linux or Cygwin
redprotoman said:
You'll need Linux or Cygwin
Click to expand...
Click to collapse
Read the post...
He says : I install cygwin.
Trolol.
You do better watch out with your spam to get 10 postd
Sent from my GT-S5660 using xda app-developers app
now i'm trying with kitchen
i unpack the boot.img
but i cant re-pack it because the kitchen say "working folder not found"
Sent from my GT-S5660 using Tapatalk 2
Msilviu said:
now i'm trying with kitchen
i unpack the boot.img
but i cant re-pack it because the kitchen say "working folder not found"
Sent from my GT-S5660 using Tapatalk 2
Click to expand...
Click to collapse
use any rom.zip likecm7 and place it in .kitchen/origonal update
open cugwin - kitchen
hit 1
select the rom you pasted
hit 0 after ots dome
now hit 20 for boot img tools
press The button to extract the boot.img from the working folder
let it extract
now use the one to extract ANY boot.img
place your boot.img you want to extract into e folder bootimh123532
it gets extracted
now delete the folder BOOT-EXTRACTED and rename bootimg1223456 to BOOT-EXTRACTED
do your changes
then switch back to kitchen, and hit B to build for working folder
your boot.img is at the working folder,, copy it to were you want
thanks a lot my friend
Sent from my GT-S5660 using Tapatalk 2
DO NOT PRESS 1 - IT's a waste of time!!
Just extract your ROM onto the dsixda kitchen (using WinRAR or 7zip)
Rename the folder to WORKING_xxxx
Where xxxx is your ROM name, or you can call it whatever
Make sure inside WORKING_xxxx you have:
META-INF
system
boot.img
Then hit 0 & 20
thanks all i done my work
Sent from my GT-S5660 using Tapatalk 2
I present CWM touch 6.0.1.2!
This is for the T-mobile d2tmo only. (it may work on others but it has not been tested)
External sd card support is present.
to install:
1. Rename the file to cwmtr6.img to make this easier.
2. adb push cwmtr6.img /sdcard/cwmtr6.img * (skip this step if the file is already on your sdcard).
3. adb shell *If not using adb, and you want to use terminal emulator, start at step 5. with the file already on your sdcard.
4. su
5. dd if=/sdcard/cwmtr6.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
6. reboot recovery
DOWNLOAD: http://jenkins.cyanogenmod.com/job/recovery/4244/artifact/archive/recovery.img
http://forum.xda-developers.com/attachment.php?attachmentid=1286722&stc=1&d=1346108680
https://www.dropbox.com/s/k9tjbhtz79y95x8/cwmtr6.img
Odin Tar (thanks to cybernook): http://forum.xda-developers.com/attachment.php?attachmentid=1287723&d=1346158787
THIS BUILD HAS ONLY BEEN COMPILED BY ME USING CLOCKWORKMODS RECOVERY BUILDER!!! I DID NOT MAKE IT!
I present CWM non-touch 6.0.1.2!
NOTE: This one is untested by me. please report back.
This is for the T-mobile d2tmo only. (it may work on others but it has not been tested)
External sd card support is present.
to install:
1. Rename the file to cwm6.img to make this easier.
2. adb push cwm6.img /sdcard/cwm6.img * (skip this step if the file is already on your sdcard).
3. adb shell *If not using adb, and you want to use terminal emulator, start at step 5. with the file already on your sdcard.
4. su
5. dd if=/sdcard/cwm6.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
6. reboot recovery
DOWNLOAD: http://forum.xda-developers.com/attachment.php?attachmentid=1286734&stc=1&d=1346109454
http://jenkins.cyanogenmod.com/job/recovery/4251/artifact/archive/recovery.img
https://www.dropbox.com/s/biy0juwx87ank78/cwm6.img
THIS BUILD HAS ONLY BEEN COMPILED BY ME USING CLOCKWORKMODS RECOVERY BUILDER!!! I DID NOT MAKE IT!
thank you
I downloaded the time placed on sd straight from phone then I highlighted the text from step 5 and pasted into my terminal emulator then reboot recovery and voila . Works like a charm! Thank you
Hmmmmm
Sent from my SGH-T999 using xda app-developers app
Do u get both exsd an sd support?
Sent from my SGH-T999 using xda premium
spodie said:
Do u get both exsd an sd support?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I was able to access both from the recovery menu.
Worked like a charm.
Sent from my SGH-T999 using xda premium
thanks great work.
Very nice -- worked like a charm! Haven't tried backing up to external, but from the looks of it, everything is working correctly.
Here's a flashable 6.0.1.2 touch version if anyone wants it.
motoman234 said:
Here's a flashable 6.0.1.2 touch version if anyone wants it.
Click to expand...
Click to collapse
Would you mind if I put that in the OP?
Sent from my SGH-T999 using Tapatalk 2
Here is an ODIN flash-able of the Touch version:
cybrnook said:
Here is an ODIN flash-able of the Touch version:
Click to expand...
Click to collapse
Can I also add that to the OP?
Sent from my SGH-T999 using Tapatalk 2
Works LIke a Champ
jellydroid13 said:
I present CWM touch 6.0.1.2!
This is for the T-mobile d2tmo only. (it may work on others but it has not been tested)
External sd card support is present.
to install:
1. Rename the file to cwmtr6.img to make this easier.
2. adb push cwmtr6.img /sdcard/cwmtr6.img * (skip this step if the file is already on your sdcard).
3. adb shell *If not using adb, and you want to use terminal emulator, start at step 5. with the file already on your sdcard.
4. su
5. dd if=/sdcard/cwmtr6.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
6. reboot recovery
DOWNLOAD: http://jenkins.cyanogenmod.com/job/recovery/4244/artifact/archive/recovery.img
http://forum.xda-developers.com/attachment.php?attachmentid=1286722&stc=1&d=1346108680
https://www.dropbox.com/s/k9tjbhtz79y95x8/cwmtr6.img
THIS BUILD HAS ONLY BEEN COMPILED BY ME USING CLOCKWORKMODS RECOVERY BUILDER!!! I DID NOT MAKE IT!
Click to expand...
Click to collapse
I followed your directions and everything works perfectly!!!
Touch CWM is so much nicer and easier on the volume button
Thank you
jellydroid13 said:
Can I also add that to the OP?
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
Knock yourself out
cybrnook said:
Knock yourself out
Click to expand...
Click to collapse
dude...your clip image in your sig is f*cking hilarious! I crack up whenever I see it.....
The sh*t people come up with.... :laugh:
So can someone give some background on this update? I did a backup to my extSD card and it doesnt backup the applications. I also see a 'blobs' folder when I look at the backup folder in root explorer.
Whats the difference between .dup and .tar in the advance backup options. Any info would be appreciated.... thanks!
So after doing some digging around, I found out a bunch about this new version of CWMR/CWMTR.
First,
You may notice a 'blobs' folder when you do a backup. Don't panic, this is now part of the backup process.
Second,
You may find that your backups are completed reasonably faster after the initial backup and your backup folder for that particular backup is also significantly smaller as in under 100mb smaller when it used to be close or even over 1gig.
Touch Recovery does not make a "full backup" anymore. It only backs up what has changed since a previous backup, and keeps track of the changes in a clockworkmod/backup/blobs folder. This is pretty cool because its designed to save on space and speed up the backup process. So if you look at your 'blobs' folder, its size is going to be HUGE. Thats where all the files that once made up your HUGE zip backup are located.
Hopefully you guys find this info a little more helpful....because I had a ton of questions after seeing how this new version created backups, etc.
cybrnook said:
Here is an ODIN flash-able of the Touch version:
Click to expand...
Click to collapse
Thanks for the flash-able dude. For some reason I could not do it thru terminal emulator it kept saying permissions were denied whenever I put the code in
Sent from my SGH-T999 using xda premium
makavelicruz said:
Thanks for the flash-able dude. For some reason I could not do it thru terminal emulator it kept saying permissions were denied whenever I put the code in
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
ooooo, you don't want to do that. The Odin flash-able image is ONLY flash-able through Odin. If you want, you can extract the recovery.img file from within it, and use THAT file to flash via Terminal.
You can ONLY flash a *.img file the Terminal way.
You can flash custom recovery three ways:
*.img flash-able via Terminal
*.tar, *.md5 flash-able via Odin
*.zip flash-able from within custom recovery
Good luck!
cybrnook said:
ooooo, you don't want to do that. The Odin flash-able image is ONLY flash-able through Odin. If you want, you can extract the recovery.img file from within it, and use THAT file to flash via Terminal.
You can ONLY flash a *.img file the Terminal way.
You can three ways:
*.img flash-able via Terminal
*.tar, *.md5 flash-able via Odin
*.zip flash-able from within custom recovery
Good luck!
Click to expand...
Click to collapse
I think he meant that he wasn't able to use just the img so he had to use the odin tar.
Howdy, I just tried an AOSP ROM on my gs3 and wanted to try the Bleeding Edge kernel. In case it doesn't work or I want to go back to stock, how do I go about putting the ROMs included kernel back on the phone without doing a dirty flash of the ROM?
Sent from my SPH-L710 using Tapatalk 2
You can do this (using adb) after pulling the boot.img from your current roms zip.
Code:
adb push boot.img /sdcard/boot.img
adb shell
$ su
# dd if=/sdcard/boot.img of=/dev/block/mmcblk0p7
Reboot and your old kernel will be back.
Thanks, never used adb but I can download and the commands seem pretty simple. I bet you also know how to make it into a flashable zip?
Sent from my SPH-L710 using Tapatalk 2
dante32278 said:
Thanks, never used adb but I can download and the commands seem pretty simple. I bet you also know how to make it into a flashable zip?
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
YUP
Take your rom.zip and extract ONLY the META-INF folder and boot.img
Open the "updater-script" file with a text editor and delete everything
Now type the following line, and then make sure to leave 1 line blank after it
Code:
package_extract_file("boot.img", "/dev/block/mmcblk0p7");
<blank line here>
Then save it (make sure no extension gets added) and zip up the META-INF folder and boot.img.
The zip should look like this
Inside restoreKernel.zip
---META-INF
---boot.img
Congrats! You just made a universal kernel flasher. If you want to flash any other kernel for your device now (same android version and all that, of course), just swap out the boot.img in the zip and flash away
CNexus said:
YUP
Take your rom.zip and extract ONLY the META-INF folder and boot.img
Open the "updater-script" file with a text editor and delete everything
Now type the following line, and then make sure to leave 1 line blank after it
Code:
package_extract_file("boot.img", "/dev/block/mmcblk0p7");
<blank line here>
Then save it (make sure no extension gets added) and zip up the META-INF folder and boot.img.
The zip should look like this
Inside restoreKernel.zip
---META-INF
---boot.img
Congrats! You just made a universal kernel flasher. If you want to flash any other kernel for your device now (same android version and all that, of course), just swap out the boot.img in the zip and flash away
Click to expand...
Click to collapse
Sent from my SPH-L710 using Tapatalk 2
dante32278 said:
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
Will this process work on my Ace II ?
dimigeo1996 said:
Will this process work on my Ace II ?
Click to expand...
Click to collapse
You would need to change the partition it flashes the boot.img to (the /dev/block/mmcblk0p7 part)
But other than that, it should
I know most of you already know this, but it may help others because this is very usefull for installing kitkat.
It's a pain to copy an 1,2 GB ROM to internal storage, so sideloading (installing from PC) it's lot easier and faster.
So here's the trick.
Copy the zip you want to install in "adb" folder (archiev attached)
Reboot phone in recovery mode
Optional - do your wipes
If you have CMW
Go to install zip -> install zip from sideload
If you have TWRP
Go to advanced -> ADB sideload
connect the USB cable and run START.cmd
type "adb devices" to check if your phone is recognized and connected (skip if you know everything it's ok)
type "adb sideload kitkat.zip" (replace kitkat with zip's name)
Notes:
Ofc you need USB drivers
Ive tried that a couple times but always i get a "cannot read kitkat.zip" thing, any idea why?
Sent from my LG-E975 using XDA Premium 4 mobile app
mastor10 said:
Ive tried that a couple times but always i get a "cannot read kitkat.zip" thing, any idea why?
Click to expand...
Click to collapse
Umm... Did you replace "kitkat.zip" with the actual name of your zip file (or rename your zip to "kitkat.zip")? I know it might be a very stupid question, but I can only read your post, not your mind...
kt-Froggy said:
Umm... Did you replace "kitkat.zip" with the actual name of your zip file (or rename your zip to "kitkat.zip")? I know it might be a very stupid question, but I can only read your post, not your mind...
Click to expand...
Click to collapse
Of course man, all of the roms ive flashed was through sideload
mastor10 said:
Of course man, all of the roms ive flashed was through sideload
Click to expand...
Click to collapse
Make a screenshot of what you're doing and error you get, this way will be easier for both.
roscatel said:
Make a screenshot of what you're doing and error you get, this way will be easier for both.
Click to expand...
Click to collapse
there you go
i changed the name to zip but norhing happens
mastor10 said:
there you go
i changed the name to zip but norhing happens
Click to expand...
Click to collapse
First, there is no way for a rom to use ".rar" extension. After, error means that the file couldn't be read (missing or corrupted). Also you may try my method which doesn't need android SDK, so there is no complications with wrong paths or such.
roscatel said:
First, there is no way for a rom to use ".rar" extension. After, error means that the file couldn't be read (missing or corrupted). Also you may try my method which doesn't need android SDK, so there is no complications with wrong paths or such.
Click to expand...
Click to collapse
yes i know, but in there the rom is in rar http://forum.xda-developers.com/showthread.php?t=2762171
so i changed the rar to zip, also i downloaded the file 3 times and the same happens, ill try with your adb and see
also the others zips i flash through sideload from sdk works just fine, only in this rom i get the error
edit, nope the same happens
mastor10 said:
yes i know, but in there the rom is in rar http://forum.xda-developers.com/showthread.php?t=2762171
so i changed the rar to zip, also i downloaded the file 3 times and the same happens, ill try with your adb and see
also the others zips i flash through sideload from sdk works just fine, only in this rom i get the error
edit, nope the same happens
Click to expand...
Click to collapse
Look at the screen I've attached. Are you sure your zip it's not the same have you checked it? I've highlighted the rom itself.
roscatel said:
Look at the screen I've attached. Are you sure your zip it's not the same have you checked it? I've highlighted the rom itself.
Click to expand...
Click to collapse
this is what i download
https://drive.google.com/uc?id=0BxtwB2oE42pDNFJsaGJ3ODNkWGM&export=download
from the topic i mention above, its the same, i rename it to a smaller name though
mastor10 said:
this is what i download
https://drive.google.com/uc?id=0BxtwB2oE42pDNFJsaGJ3ODNkWGM&export=download
from the topic i mention above, its the same, i rename it to a smaller name though
Click to expand...
Click to collapse
Ok then simply extract "VDT-V20..." from that archieve. That's the zip you have to install via sideload!
roscatel said:
Ok then simply extract "VDT-V20..." from that archieve. That's the zip you have to install via sideload!
Click to expand...
Click to collapse
this is whats inside the zip i download
mastor10 said:
this is whats inside the zip i download
Click to expand...
Click to collapse
It looks to me that your screenshot is showing contents of a ZIP inside a RAR. What @roscatel means, you should extract the ZIP from the RAR that you downloaded -- it's actually an archive packed inside another archive. After that, flash the ZIP you just extracted using any method (sideload, or from recovery as usual). Do NOT rename RAR to ZIP -- it doesn't make sense, and will most definitely NOT work.
kt-Froggy said:
It looks to me that your screenshot is showing contents of a ZIP inside a RAR. What @roscatel means, you should extract the ZIP from the RAR that you downloaded -- it's actually an archive packed inside another archive. After that, flash the ZIP you just extracted using any method (sideload, or from recovery as usual). Do NOT rename RAR to ZIP -- it doesn't make sense, and will most definitely NOT work.
Click to expand...
Click to collapse
hi my pc known my device but when i write adb sideload ...zip foul (stand) 0% and i watting 15 minuts for process but nothing happening . plz help me . my device is xperia tx.. plzzzzzzzzzzzzz
install the last TWRP (flash it via bootloader), same process by opening commande window in the folder (shift+right click: then open command) and tiping command: fastboot flash recovery (name of the file).img (like that: exemple: fastboot flash recovery lastTWRP.img)
it autorize MTP transfer, so you cas access your internal storage and copy the zip file
or retrieve backups from your phone
I'm using and side load on my lge
LM-x210MA an I keep getting these different errors do I need to flash more than a twrp.imf what about sys.img root.img root-boot.img this is all a lot to take in as a first timer go easy I'm not trolling just trying to learn
[SCRIPT][17.04.22][v1.2.0] MIUI Power Menu Patcher - add recovery & fastboot reboot
This patch your system to have got recovery & fastboot reboot from power menu.
Download latest release
Changelog
-Added visual menu
-Added function to restore backups
-Added ability to supply environment directory as argument with `-d <dir>`
-Added a lot of code improvements
-Fixed correct build number in backup folder
-Fixed some Busybox issues
Thanks to @DarthJabba9 for all the work of this update.
All releases and changelogs
Source code on Github
How-To
This script is to use from Android, need a terminal app as Terminal Emulator for example and a rooted device. Tested in Redmi Note 2 with Xiaomi EU & MultiROM
Run from terminal this
Code:
su
sh DIR/miui-powermenu-patcher.sh
Change "DIR" to the location where is the script.
Pro tip: move the script to /data and rename to mpp for example to have easy access from terminal.
Example (click image)
Patch sh no such, following dir change it, any solution?
Sent from my Redmi Note 2 using Tapatalk
if i move file to /data so what command..still DIR?
rockadz9 said:
View attachment 4095317
Patch sh no such, following dir change it, any solution?
Sent from my Redmi Note 2 using Tapatalk
Click to expand...
Click to collapse
The problem is that tail search for $0 variable and in your case is miuipm.sh, so as in the script the current directory is changed and the script isn't in it, occurs that.
Thanks for report it, I will fix it. ATM run as: sh $(pwd)/miuipm.sh
harizamzi said:
if i move file to /data so what command..still DIR?
Click to expand...
Click to collapse
Run from terminal this
Code:
su
sh DIR/miui-powermenu-patcher.sh
Change "DIR" to the location where is the script.
Click to expand...
Click to collapse
Please read...
Updated to v1.1.1
Deic said:
The problem is that tail search for $0 variable and in your case is miuipm.sh, so as in the script the current directory is changed and the script isn't in it, occurs that.
Thanks for report it, I will fix it. ATM run as: sh $(pwd)/miuipm.sh
Please read...
Click to expand...
Click to collapse
Yes mate my ROM 7.3.23 xiaomi.eu, this file change name & directory same problem. (Miui-powermenu-patcher.sh =old version / mpp.sh =new version)
Any solution?
Sent from my Redmi Note 2 using Tapatalk
rockadz9 said:
Yes mate my ROM 7.3.23 xiaomi.eu, this file change name & directory same problem. (Miui-powermenu-patcher.sh =old version / mpp.sh =new version)View attachment 4096809
Any solution?
Sent from my Redmi Note 2 using Tapatalk
Click to expand...
Click to collapse
Did you try run as "sh /data/mpp.sh" (add "/" before "data") or "cd /data" and after "sh mmp.sh"?
Deic said:
Did you try run as "sh /data/mpp.sh" (add "/" before "data") or "cd /data" and after "sh mmp.sh"?
Click to expand...
Click to collapse
I try run as "sh data/mpp.sh" and run as "sh /data/mpp.sh"
Sent from my Redmi Note 2 using Tapatalk
rockadz9 said:
I try run as "sh data/mpp.sh" and run as "sh /data/mpp.sh"
Sent from my Redmi Note 2 using Tapatalk
Click to expand...
Click to collapse
and the result is the same? that is strange... what is your busybox version? and you can provide miui-powermenu-patcher.log under /data/miui-powermenu-patcher folder? looks like you have not got proper unzip busybox built-in command...
@Deic There seem to be 2 problems:
1. wget.zip - it seems that it does not get decoded properly with base64; in any case, the error log shows that it cannot be unzipped
2. The call to patch.sh - you might want to provide the full pathname
Edit: I think the wget problem is that the zip file is corrupt - probably a result of a wrong START_LINE
DarthJabba9 said:
@Deic There seem to be 2 problems:
1. wget.zip - it seems that it does not get decoded properly with base64; in any case, the error log shows that it cannot be unzipped
2. The call to patch.sh - you might want to provide the full pathname
Edit: I think the wget problem is that the zip file is corrupt - probably a result of a wrong START_LINE
Click to expand...
Click to collapse
The START_LINE is good in all versions released, I tested before of release them and all is fine... And the output of no patch.sh is because, no wget = no patch.sh. I will wait to @rockadz9 to see what is the issue, I maybe due to bad unzip or that seems.
Deic said:
and the result is the same? that is strange... what is your busybox version? and you can provide miui-powermenu-patcher.log under /data/miui-powermenu-patcher folder? looks like you have not got proper unzip busybox built-in command...
Click to expand...
Click to collapse
Yes results is the same, version Busybox1.26-2_arm64. and patch log attch
Sent from my Redmi Note 2 using Tapatalk
@rockadz9 Open the script file with a text editor, and add these lines near the top of the file
Code:
alias basename="busybox basename"
alias dirname="busybox dirname"
alias tail="busybox tail"
alias base64="busybox base64"
alias unzip="busybox unzip"
alias sed="busybox sed"
alias awk="busybox awk"
Then add 7 to the value of START_LINE, save the file, and run the script again.
1.2.0 released!
All the nice stuff of this update is thanks to @DarthJabba9, I did almost nothing.
Go to OP to download!
It's work for me, first one i run as 'sh data/mpp.sh and i got message no such....
and second time i run as 'sh /data/mpp.sh its work fine. thx bro
I'm trying to get this to work on stable EU version 7.0.6. After running the script the menu can be displayed but only the reboot option works. Both the fastboot and recovery cause the screen to become blurred and nothing happens. Pressing the back button clears the screen and I'm back at the point prior to pressing the power button. I've attached the script log. Can anyone tell me what's wrong ?
Cannot show text bellow addition icon
MIUI 9 7.9.7 global dev
worked great
thanks a lot