Develop Bugs

No 3G or 4G - 1x only - No Nandroid Backup HELP!

So my friend rooted his Evo with Unrevoked. I verified s-off.
He copied a PC36IMG onto his SD which turns out was some 2.1 rooted stock ROM. After doing that his phone could not make/receive calls/text or connect to 1x/3G/4G. Basically an expensive phone that has no phone functions. Everything else works (WiFi included). He flashed http://link.geekfor.me/rootedromzip onto his phone from http://forum.androidcentral.com/htc...vo-install-clockwork-recovery.html#post165998.
When I looked at it, he still did not have a custom recovery so I flashed Amon RA PC36IMG. Full factory wiped data/cache/dvalik. Flashed Synergy RC1. Phone still could not make/receive calls and was getting Error 16 when trying to call. Called Sprint and they reprovisioned phone and fixed calls and texting. Noticed his phone is stuck on 1x and cannot connect to 3G when my phone next to his works fine. Did not test 4G yet since I have poor 4G coverage in my area. Cannot update his profile - just sits there like something is happening but it never completes.
What are his options here? Is it a bad radio or something that we can fix? Can we flash a stock rooted ROM and regain 3G? Remember, no nandroid was made unfortunately.

I would try flashing the latest radios just to be sure. And tell your friend to always make a nandroid backup to avoid this problem in the future.

Well his first time flashing. I think he mistakenly thought the PC36IMG as a custom recovery but it was actually an entire ROM.
Didn't have a chance to nandroid. I'm instructing him how to update newest radio combo and seeing what happens.
Update: Flashed latest combo radio. Updated profile and PRL. Still stuck on 1x even after reboot. Is he hosed? Does Sprint have to do something on their end to fix his EVDO? 4G isn't working either by the way.
Update 2: Wimax Keys Checker - https://market.android.com/details?id=com.joeykrim.wimaxkeys says that RSA Key is present. Relieved that he didn't lose his RSA key. Just can't figure for the life of me why he can't connect to 3G or 4G. Not sure where to go from here? Maybe trying to flashing latest stock rooted RUU? http://forum.xda-developers.com/showthread.php?t=1110733

Bumping for some attention.

Hey, happened to me a couple of times, it will come back. Maybe wipe everything again, have you tried ##data# and entering msl key, wait... Have you updated his data profile in settings
Sent from my PC36100 using XDA Premium App

Hello.....did that work for ya?
Sent from my PC36100 using XDA Premium App

Ok, was on the road when I had wife reply...lol.. When you rebooted the phone,did you wipe cache,and dalvik. Then try updating profile? It sounds weird,but has worked for me,without even updating profile. I have had no coverage before after flashing a Rom,also,did just that,and it came back. If rsa keys are present,that is good. If you would be kind enough to reply,whether fixed or not,would appreciate it,anyway,gonna move on...
Sent from my PC36100 using XDA Premium App

Cares said:
So my friend rooted his Evo with Unrevoked. I verified s-off.
What are his options here? Is it a bad radio or something that we can fix? Can we flash a stock rooted ROM and regain 3G? Remember, no nandroid was made unfortunately.
Click to expand...
Click to collapse
Did he try updating his profile & prl
Sent from my criffvo

Updating profile and PRL doesn't work. It keeps attempting to update but it is never successful.
I haven't had a chance to get his phone to just try reflashing a new ROM or stock ROM to see what will happen though.
He says using ##data# and entering his MSL code and changing EVDO to automatic doesn't work either.

Cares said:
Updating profile and PRL doesn't work. It keeps attempting to update but it is never successful.
I haven't had a chance to get his phone to just try reflashing a new ROM or stock ROM to see what will happen though.
He says using ##data# and entering his MSL code and changing EVDO to automatic doesn't work either.
Click to expand...
Click to collapse
I would start over again ... wipe completely with Calkulin's "fomat all" zip and flash a rooted stock rom like xhausx. Once the phone boots up, call Sprint and have them walk you through provisioning everything. Once all is well, then move into whatever custom stuff he wants.

wmdunn said:
I would start over again ... wipe completely with Calkulin's "fomat all" zip and flash a rooted stock rom like xhausx. Once the phone boots up, call Sprint and have them walk you through provisioning everything. Once all is well, then move into whatever custom stuff he wants.
Click to expand...
Click to collapse
You took the words from my mouth!
Is he Flashing the RUU's or just running them through the computer? Normally, you sync your phone or through hBoot and then start the program, try flashing stock Froyo and then factory reset once flashed, it helps clear out traces of old roms etc. If you need anymore help feel free to ask, I would be more than happy!

I don't think it worked.
Calkulin's Format, flashed Odexed http://forum.xda-developers.com/showthread.php?t=1133379.
It showed 3G but I think it was misleading. Wiped and flashed to evodeck and it went back to showing 1x. My phone has 3G showing on evodeck next to his so he definitely has 3G coverage.
I guess it's just time to call Sprint for a re-provision? Does it have to be on a Sense ROM for them to reprovision?

Cares said:
I don't think it worked.
Calkulin's Format, flashed Odexed http://forum.xda-developers.com/showthread.php?t=1133379.
It showed 3G but I think it was misleading. Wiped and flashed to evodeck and it went back to showing 1x. My phone has 3G showing on evodeck next to his so he definitely has 3G coverage.
I guess it's just time to call Sprint for a re-provision? Does it have to be on a Sense ROM for them to reprovision?
Click to expand...
Click to collapse
you dont need Sprint to provision, just get your MSL code and do it your self plus I would do a search for people who may of had similar issues and see what they did. Now if that does not work then why dont you check what your network settings are.. See if its set to CDMA(Auto) I remember my Touch Pro I could of set it to 1x maybe something is getting stuck. I think its in ##3282 you check it and I also remember an app on the market called network that did it for you as well.
If that does not work then flash 3.70 radios and then a 3.70RUU and start from scratch.

He already tried ##data#. He can change his EVDO to automatic but it doesn't stay that way.

Alright I don't know how I fixed it but it's fixed.
Just cannot get 4G now. Wimax keys are present. It keeps scanning and cannot get connect. Previously could get 4G at these locations.

I am running EVO as donor/target phone, my is only 1x speed, no matter which rom I try
Synergery, Mik, Stock-Rooted, differ kernal, different PRL, check the data profile Automatic, Try restore but can not cat automatically update, still need to go qpst to update my profile. I have been working on this for two weeks. I went back to my orig phone, it show ev most of time, the speed is must faster than my evo. Searc all over from goole, still no luck, Anyone any idea to try

sitlet said:
I would try flashing the latest radios just to be sure. And tell your friend to always make a nandroid backup to avoid this problem in the future.
Click to expand...
Click to collapse
+1
i know this post is somewhat old. but Making a back up wont take hardly and extra time! always always make one unless you have 100% reliable roms already backed up.

[Q] 4G wont connect, just scans then says DISCONNECTED

I installed the Synergy custom rom with God Mode and my Wimax isnt working, it says scanning then disconnected 1-2 seconds later. I checked my wimax keys and it says they are present, I updated my profile and prl but it still doesn't work. I have a nandroid back up if that is nessesary.
any help is appreciated!

Mine sometimes goes out too but I just reboot and it works again. Although once it didn't work so I wiped and reflashed the wimax zip and it came back.
Sent from my PC36100 using XDA App

I would give it a day, sometimes sprints network will go out. If it doesnt work tomorrow, reflash a stock rom backup and try that.

Wipe and flash it again. It works for me.

[Q] Sprint Note 2 LTE Issue

Hello there, I have been in the search for a perfect 4.4 ROM to work, I seem to be at an impass..
The 2 that I have tried, and Quite enjoyed so far are the Omni ROM and the Cyanogenmod 11
Both roms have the same issue, I cannot connect to a 4g LTE Sprint tower. I know the LTE Towers are working, My mom has the same phone, Sprint Note 2 and I have Mac's Rom on it and is picking up a very strong 4g Signal, yet my phone which sits literly right next to it, Refuses to get any 4g.. I drove around, went to known working areas, Never once did I snatch a 4g signal.
I played with the settings, it is set to LTE mode, I even tried Flashing as a fresh Install..
I tried flashing a Stock rom, but for some reason after it installs, and on boot up the phone does not work. I get a blank screen and literly nothing. I have to pull the battery to get it to turn back on. At that point I have to either Re-flash or restore a backup through CWM.
Any help would be appreciated, I miss my LTE Thanks

Same issue here. Not sprint though...

In cm11 set your mobile network type to cdma+lte/evdo or global. See if that works.
Next you can try to flash a touch wiz rom and do a hands free activation, verify lte works on the touch wiz rom, then flash to CM11 and see if you can connect to lte.

DarkManX4lf said:
In cm11 set your mobile network type to cdma+lte/evdo or global. See if that works.
Next you can try to flash a touch wiz rom and do a hands free activation, verify lte works on the touch wiz rom, then flash to CM11 and see if you can connect to lte.
Click to expand...
Click to collapse
I have tried setting it to both. Global shows no signel what so ever on anything, I currently have it on cdma=lte/evdo and I just get a good 3g signal..
I might try that one out, Which is a good touch wiz rom to try and do that with ? I dont think I even tried a touch wiz rom yet

scorpnet said:
Hello there, I have been in the search for a perfect 4.4 ROM to work, I seem to be at an impass..
The 2 that I have tried, and Quite enjoyed so far are the Omni ROM and the Cyanogenmod 11
Both roms have the same issue, I cannot connect to a 4g LTE Sprint tower. I know the LTE Towers are working, My mom has the same phone, Sprint Note 2 and I have Mac's Rom on it and is picking up a very strong 4g Signal, yet my phone which sits literly right next to it, Refuses to get any 4g.. I drove around, went to known working areas, Never once did I snatch a 4g signal.
I played with the settings, it is set to LTE mode, I even tried Flashing as a fresh Install..
I tried flashing a Stock rom, but for some reason after it installs, and on boot up the phone does not work. I get a blank screen and literly nothing. I have to pull the battery to get it to turn back on. At that point I have to either Re-flash or restore a backup through CWM.
Any help would be appreciated, I miss my LTE Thanks
Click to expand...
Click to collapse
Personally I would recommend doing this:
Backup everything to your PC (both internal and external)
Delete the contents of the "0" folder on your internal card. If you use ES File Explorer, you'll need to enable root access, and then while in the app hit the menu button. The left menu will slide open and you'll see "Local".... underneath that you'll find the "0" folder. The problem is the way CM and Touchwiz mount the file system - they don't do it the same way. So when you do a factory reset in CWM, it doesn't clear out one of those folders. (I found this thread helpful - especially posts 2 & 4) I had major data problems on CM10 for 2-3 months, then I found this out.
After you do that go back to stock. Make sure you download the keep root file as well.
To play it safe, once stock, I highly recommend entering ##72786# in your dialer. The phone will grab the latest prl and update your profile. Whether or not you want to update the software (incl modem) is up to you, but I'd rather not get into the knox world.
Verify working gps. (I prefer "GPS Status")
Then go back to CM11.

I will try that out thanks
Sent from my SPH-L900 using XDA Premium 4 mobile app

scorpnet said:
I will try that out thanks
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Update us on your progress.
If it works, consider hitting the thanks button - at the very least the guy in that other thread - I know I thanked him - his info saved me from going crazy!!!
I had working data (3g/LTE) on any touchwiz, but not on CM. It turned out that I had some corrupted data that wasn't getting deleted upon a factory reset. After I cleared out that data, everything was fine.
Hope your phone is back to normal!

Finally was able to download everything and run the tip, Thanks a lot dude! That helped and that did it ! I got 4g Back and everything is all peachy!!! Thanks again!

[Q] Lost LTE after switching to KitKat

I decided to give Kit Kat another try a few days ago, but since then I have not been able to connect to LTE.
Prior to flashing I was running CM10.2 and my LTE was working fine. I initially lost LTE when I flashed PACMAN. I have also tried AOSB/ProBAM and Beanstalk. None of the Kit Kat roms gave me LTE so I gave up and restored CM10.2, but afterward I was still not getting any LTE connection.
I tried flashing the MD4 modem, but that didn't seem to fix anything. I've also heard that going back to stock could help, but I'd rather not have Knox if I don't have to use it. Which stock ROM here on XDA would be the best (Not planning on using the ROM. I just want LTE and then will flash back to Kit Kat)? Would a different modem fix my LTE issues? Is MK3 better than MD4, or are there any newer modems I should try?
Thanks for the help!

snak1e said:
I decided to give Kit Kat another try a few days ago, but since then I have not been able to connect to LTE.
Prior to flashing I was running CM10.2 and my LTE was working fine. I initially lost LTE when I flashed PACMAN. I have also tried AOSB/ProBAM and Beanstalk. None of the Kit Kat roms gave me LTE so I gave up and restored CM10.2, but afterward I was still not getting any LTE connection.
I tried flashing the MD4 modem, but that didn't seem to fix anything. I've also heard that going back to stock could help, but I'd rather not have Knox if I don't have to use it. Which stock ROM here on XDA would be the best (Not planning on using the ROM. I just want LTE and then will flash back to Kit Kat)? Would a different modem fix my LTE issues? Is MK3 better than MD4, or are there any newer modems I should try?
Thanks for the help!
Click to expand...
Click to collapse
Any of the ROMS that have [TW] in the title should work. Full Knox only comes with flashing a tar file in ODIN, because your flashing every partition of the phone. Modified stock ROM zips do not have knox, unless otherwise noted. Make sure to do a prl and profile update when you flash to stock.
sent from my Gs3

joeyhdownsouth said:
Any of the ROMS that have [TW] in the title should work. Full Knox only comes with flashing a tar file in ODIN, because your flashing every partition of the phone. Modified stock ROM zips do not have knox, unless otherwise noted. Make sure to do a prl and profile update when you flash to stock.
sent from my Gs3
Click to expand...
Click to collapse
Flashed Wicked Sensations last night with the MK3 modem and I seemed to be getting LTE as soon as that booted. Updated my PRL and Profile, and then wiped. Installed AOSB again, and I seemed to be getting LTE until I rebooted. After the first reboot I seem to be stuck in 3G again.

Im currently running AOSB on 2 devices. When I first flashed them, I had the same issue until I rebooted the phone. After that I never had this issue again.
sent from my Gs3

joeyhdownsouth said:
Im currently running AOSB on 2 devices. When I first flashed them, I had the same issue until I rebooted the phone. After that I never had this issue again.
sent from my Gs3
Click to expand...
Click to collapse
I think that's the opposite of what happened to me. My status bar said I had LTE when I first booted AOSB (this was after flashing/wiping TW). After the first reboot it connected to 3G and I haven't seen the LTE signal since.
I have updated the APNs, but I was using the same APNs for a while and had LTE on CM10.2 with them.

snak1e said:
I think that's the opposite of what happened to me. My status bar said I had LTE when I first booted AOSB (this was after flashing/wiping TW). After the first reboot it connected to 3G and I haven't seen the LTE signal since.
I have updated the APNs, but I was using the same APNs for a while and had LTE on CM10.2 with them.
Click to expand...
Click to collapse
This is something wierd with Kitkat. I do not believe a fix has been found just yet. but if you dial *#*#info#*#* on most phones you can get into the phone systems and turn LTE back on.

ShrekOpher said:
This is something wierd with Kitkat. I do not believe a fix has been found just yet. but if you dial *#*#info#*#* on most phones you can get into the phone systems and turn LTE back on.
Click to expand...
Click to collapse
I didn't know about this menu. Thanks for that. I went into Phone Info and tried selecting LTE only but it didn't connect to anything. Not sure what that means. There are other
There are some other options in there for networks (e.g. TD-SCDMA, CDMA auto). Would any of them help picking up Sprint LTE?
Other options include:
Turn off radio, CellInfoListRate
Turn on IMS registration required
Turn on SMS over IMS
Turn on lte ram dump
SMSC:_____________ Update Refresh

snak1e said:
I didn't know about this menu. Thanks for that. I went into Phone Info and tried selecting LTE only but it didn't connect to anything. Not sure what that means. There are other
There are some other options in there for networks (e.g. TD-SCDMA, CDMA auto). Would any of them help picking up Sprint LTE?
Other options include:
Turn off radio, CellInfoListRate
Turn on IMS registration required
Turn on SMS over IMS
Turn on lte ram dump
SMSC:_____________ Update Refresh
Click to expand...
Click to collapse
KitKat roms are currently having data issues. You could try backing up your current KK rom and go back to Stock, update prl and backup your DNS settings then go back to your backed up KK rom and restore from the dns settings you backed up.

How does one downgrade from kitkat to jellybean? I tried to just flash a jellybean ROM with a clean install and got an error?
Sent from my SPH-L710 using Tapatalk

TheManiac said:
How does one downgrade from kitkat to jellybean? I tried to just flash a jellybean ROM with a clean install and got an error?
Sent from my SPH-L710 using Tapatalk
Click to expand...
Click to collapse
What error ad you getting exactly?
Sent from my SPH-L710 using Tapatalk

djpabz23 said:
What error ad you getting exactly?
Sent from my SPH-L710 using Tapatalk
Click to expand...
Click to collapse
It says something to do with missing a partition?
Sent from my SPH-L710 using Tapatalk

snak1e said:
I decided to give Kit Kat another try a few days ago, but since then I have not been able to connect to LTE.
Prior to flashing I was running CM10.2 and my LTE was working fine. I initially lost LTE when I flashed PACMAN. I have also tried AOSB/ProBAM and Beanstalk. None of the Kit Kat roms gave me LTE so I gave up and restored CM10.2, but afterward I was still not getting any LTE connection.
I tried flashing the MD4 modem, but that didn't seem to fix anything. I've also heard that going back to stock could help, but I'd rather not have Knox if I don't have to use it. Which stock ROM here on XDA would be the best (Not planning on using the ROM. I just want LTE and then will flash back to Kit Kat)? Would a different modem fix my LTE issues? Is MK3 better than MD4, or are there any newer modems I should try?
Thanks for the help!
Click to expand...
Click to collapse
ohhh i had this issue but i figured it out for pacman and most roms just download nova launcher and when you do create a shortcut on nova ad click on setting an it should say apn once there u open it and youll see where it says ehprd something like that click on it and go all the way to the bottom and change where it says bearer to ehrpd and lte should work ^_^

Ok so I finally got it working, although I'm not sure what was wrong with everything in the first place. My buddy said Cyanogenmod screwed up a recent ROM, so maybe that code was in one of the ROMs I was using.
Each time I flashed back to TouchWiz (I ended up using Wicked Sensations) I could get 4G/LTE. I ran a **72786*, did a PRL & profile update. Prior to finding a working ROM, when I went back to BeanStalk/PACMAN I would lose LTE. After I found the updated BeanStalk ROM I flashed and it still had LTE! Happy days!
At this point I was able to send MMS somehow, but phone was having problems being recognized by the network. I could connect to LTE but couldn't use the data. After I updated the APNs everything started working again.

snak1e said:
Ok so I finally got it working, although I'm not sure what was wrong with everything in the first place. My buddy said Cyanogenmod screwed up a recent ROM, so maybe that code was in one of the ROMs I was using.
Each time I flashed back to TouchWiz (I ended up using Wicked Sensations) I could get 4G/LTE. I ran a **72786*, did a PRL & profile update. Prior to finding a working ROM, when I went back to BeanStalk/PACMAN I would lose LTE. After I found the updated BeanStalk ROM I flashed and it still had LTE! Happy days!
At this point I was able to send MMS somehow, but phone was having problems being recognized by the network. I could connect to LTE but couldn't use the data. After I updated the APNs everything started working again.
Click to expand...
Click to collapse
How did you update your APN's?

try switching to philz touch recovery where it will give you 2 options....do clean to install a new rom.....if works....thks appreciated...safe flashing and live prosperous

djpabz23 said:
How did you update your APN's?
Click to expand...
Click to collapse
This should work http://forum.xda-developers.com/showthread.php?t=1794956

[Q] Super G2 zvc rom

So this is my first post ever, as I usually learn everything I need to know from reading and searching this is one I can't seem to find
The problem is Im running the super g2 zvc rom I am trying to usethe native hotspot as it says it works after the flash it worked great for netflix i rebooted the device and now it shows my ps3 connected but wont give me any internet connection, anyone know a fix for this?

Turn Hotspot on then update PRL. May have to do this every time
Sent from my LG-LS980 using XDA Free mobile app

beezar said:
Turn Hotspot on then update PRL. May have to do this every time
Sent from my LG-LS980 using XDA Free mobile app
Click to expand...
Click to collapse
Worked like a charm thanks a lot!!!!!

Same issue with hotspot using super g2 rom.
I tried updating PRL but my data still goes on and OFF. Is there another hotspot mod I can use with this rom? Any help would be appreciated.

As a bump to this thread, and to keep the forums tidy, I, too, am having issues with SuperG2
I flashed it and it worked beautifully but I was unable to get any data service. I tried updating PRL/Profile but that would not work. Kept giving me a network error.
That being said, I finally got data to work (beyond me, not sure how this happened but I did NOT get PRL/Profile to update) and was using it merrily until I began to restore some files I had backed up via Titanium.
I rebooted to get the data from these files to run smoothly but after a reboot I lost all connection. It told me that my service was disabled.
I reflashed the ROM but am back to square one - unable to updated my PRL/Profile and cannot get any data, even tho the LTE logo is at the top and spinning. WiFi tethering works and I can access the internet in this way, but not in any other way.
I am being forced to go back to stock =(
Any help would be appreciated.

XenoCyanide said:
As a bump to this thread, and to keep the forums tidy, I, too, am having issues with SuperG2
I flashed it and it worked beautifully but I was unable to get any data service. I tried updating PRL/Profile but that would not work. Kept giving me a network error.
That being said, I finally got data to work (beyond me, not sure how this happened but I did NOT get PRL/Profile to update) and was using it merrily until I began to restore some files I had backed up via Titanium.
I rebooted to get the data from these files to run smoothly but after a reboot I lost all connection. It told me that my service was disabled.
I reflashed the ROM but am back to square one - unable to updated my PRL/Profile and cannot get any data, even tho the LTE logo is at the top and spinning. WiFi tethering works and I can access the internet in this way, but not in any other way.
I am being forced to go back to stock =(
Any help would be appreciated.
Click to expand...
Click to collapse
Connect to wifi then update the profile and prl (can be done at home if you have wifi, or mcdonalds, or starbuck, or anywhere that has open wifi)

Similar Issue
Running SuperG2, comming from Milestone1. I cannot seem to get the WiFi tether to work on SuperG2. It worked great on Milestone1. I tried the update PRL while Wifi tether is active but to no avail. I'm not sure if it's related but my signal kinda sucks too. Where I normally get 4g now I only get 3g with sparatic 4g and I also loose my signal altogether at times. I have to activate airplane mode and then deactivate it to get my signal back. I would go back to Milestone1 but SuperG2 is the frontline. Need to keep moving forward. Any help is appreciated. Thanks.