i tried using qpst
now above the network towers there is a triangular sign
what does this mean??????
now its showing that my phone no. is switched off
what should ii do now ??
plzzz help...................
i am unable to flash the backup file
its showing overflow during roaming list file send
Related
Hi
I gust upgraded my mobile from 2002 to 2003 t-mobile rom
But there was problem when I entered the phone settings and network setting
I lost the network in my mobile and it gives me an! Mark instead of the network signal
And when I tried to enter the phone settings it won't enter
And I tried to but another rom but there is an error kept saying that the device is not connected
And it s prop ply connected and excepting to install other software
Please help me to have my phone signal pack
Hi guys, please I need your help. I buy a galaxy note II (second hand) and I inserted my sim chip, after that I did calls and visite web sites with data 3G. but after update to android 4.1.2 my cell can't do calls and also I can't connect to my cell companny net work. Some information :
1- the imei was previusly changed, but the new imei is not blocked
2- the old imei also is not bloked. (Can I returno to the original imei?)
3- I don't have back up of my old efs folder.
4- the rest of features of my cell phone works fine just I can't conect to my network.
5- When I try register my device in the cell network, aperar a message that says :" divice registered" but When I go bak to do a call, the message still appear "Not Service, network selected (Claro)not available
Please if you can give me a hand I will be happy.
My friend Jeremy helped me with getting rid of the "Hands Free Activation" pop-up and I thought I would share it. It especially comes in handy when you are flashed to another carrier. If you are on one of the new custom ZVB Roms you probably don't have to worry about it. All you have to do is:
1) Get a Root File Browser .... I like Rom Tool Box
2) Go to "System" folder
3) Go to "App" folder .... (not Apps)
4) Scroll down and find "OmaDmclient.apk" and rename it to "OmaDmclient.bak"
5) Reboot and you should not get that aggravating ass pop up any more
:silly::laugh:
I hope I've helped someone because a lot of people have damn sure helped me!
Just Showing Off
Since this thread is my posting I wanted to show off my Speedtest results of 3g being "legally" flashed to Page Plus
http://i43.tinypic.com/ezg6l3.jpg
I could use some help through this process
devo3d said:
Since this thread is my posting I wanted to show off my Speedtest results of 3g being "legally" flashed to Page Plus
Honestly, I'd like to start with getting any data (non-wifi) working on this phone...
What I have tools wise? CDMA Workshop
LGNPST (not working) frustrated as heck about this
My LS970 - updated to Page Plus PRL and making and recieving calls...
Can someone point me in the right direction?
Click to expand...
Click to collapse
eagleveteran said:
devo3d said:
Since this thread is my posting I wanted to show off my Speedtest results of 3g being "legally" flashed to Page Plus
Honestly, I'd like to start with getting any data (non-wifi) working on this phone...
What I have tools wise? CDMA Workshop
LGNPST (not working) frustrated as heck about this
My LS970 - updated to Page Plus PRL and making and recieving calls...
Can someone point me in the right direction?
Click to expand...
Click to collapse
have you try DFS Tools? I always use this tools flashing from sprint to smartfren (Indonesian provider)
Click to expand...
Click to collapse
eagleveteran said:
devo3d said:
Since this thread is my posting I wanted to show off my Speedtest results of 3g being "legally" flashed to Page Plus
Honestly, I'd like to start with getting any data (non-wifi) working on this phone...
What I have tools wise? CDMA Workshop
LGNPST (not working) frustrated as heck about this
My LS970 - updated to Page Plus PRL and making and recieving calls...
Can someone point me in the right direction?
Click to expand...
Click to collapse
I know I'm late responding to this but what service provider are you flashed to? ( if you haven't found a solution yet )
Click to expand...
Click to collapse
Page Plus
devo3d said:
eagleveteran said:
I know I'm late responding to this but what service provider are you flashed to? ( if you haven't found a solution yet )
Click to expand...
Click to collapse
Page Plus
Click to expand...
Click to collapse
Thank You
I was really annoyed with the popup.
Thanks for the solution :good::good:
lnxnubie said:
I was really annoyed with the popup.
Thanks for the solution :good::good:
Click to expand...
Click to collapse
No Probelem....The guy I use to use to flash phones figured it out....he was the only one (entire USA) that knew how to flash the OG to Verizon and get full data (3G). He quit flashing phones from where he was living so now I can't get in touch with him...he could flash any freakin phone..
eagleveteran said:
devo3d said:
Page Plus
Click to expand...
Click to collapse
With Page Plus and Straight Talk you have to have certain APN's set. Is your APN correctly set for Page Plus?
EDIT: ( I don't even know if I can post this but I sure admin will let me know...LOL)
I found this in my files, used it long ago and am not sure if it still is applicable but there may some information in it that may be able to lead you in the right direction......
PP
3G data speeds (HOW TO)
This guide is to get evdo data or 3g data speeds on phones flashed to page plus cellular this is not a beginers guide by no means this guide is assuming both spc codes are set to 000000.
things you will need:
1.A donor phone of your own that will ota program and one that you can swap the esn number to that of the target phone. I used a samsung i500
2.Target phone that you own
3.qpst and dfs 4.0.0.4 demo
4.drivers for both phones
Pre-Setup:
1.pull battery out of the target phone and LEAVE it out
2.place that esn number on the donor phone
3.Deactivate then reactivate the target phones esn number
4.OTA program the donor phone that has the swapped esn number on it.
5.Verify that 3g speeds are working on the donor phone
Phase 1:
1.Place donor phone in diagnostic mode and plug into computer
2.Open qpst configuration add the port
3.Go to start clients then efs explorer
4.Open the DMU folder and copy the 10.key file to your computer then exit qpst
Phase 2:
1.Open DFS and select the port that the phone is on
2.Send the spc you should see a device unlocked message in the log.
3.Go to the programming tab then the nam tab and read that page.
4.Read the Data tab and Mobile IP tab as well.
5.Do not close the dfs tab
6.Revert esn back to normal or smash the donor phone into a lot of pieces
Final Phase: (Non-Verizon and Sprint)
1.Power on target phone and place in diagnostic mode and plug into computer
2.Open qpst configuration add the port
3.Go to start clients then efs explorer
4.Now on the Left side of the efs explorer right click the screen go to new and directory
5.Name the directory "DMU" without the quotation marks then place the 10.key file into that directory by drag and drop then exit qpst
6.Now go back into dfs do not add the target phone yet and go to mobile ip nothing else on the screen should change
7.Now select the port the target phone is on in dfs and send the spc code
8.Write the nam tab to target phone after verifing it doesnt say home only then go to data tab and check the box next to pwd on the ppp section only which will change the pwd to hex format then write the data tab
9.Go to the mobile ip tab and right click the red stop sign looking thing on the second bubble and enable it and set active profile to 1 then click "write current profile settings" and click the write button on the left side of the screen
10.Now go back to the Nam tab and load the prl file I prefer using 00002 but you can experiment
Final Phase: (Verizon 4gLTE)
1.Power on target phone and place in diagnostic mode and plug into computer
2.Open qpst configuration add the port
3.Go to start clients then efs explorer
4.Now on the Left side of the efs explorer right click the screen go to new and directory
5.Name the directory "DMU" without the quotation marks then place the 10.key file into that directory by drag and drop then exit qpst
6.Now go back into dfs do not add the target phone yet
7.Now select the port the target phone is on in dfs and send the spc code
8.Write the nam tab to target phone after verifying it doesn't say home only then go to data tab and check the box next to pwd on the ppp section only which will change the pwd to hex format then write the data tab
9.Go to the mobile ip tab click "write current profile settings" and click the write button on the left side of the screen
10.Now go back to the Nam tab and load the prl file i recommend 00002 but experiment with what you want and reboot phone and enjoy
Having issues try getting 1x first on lte phones you will need a sim card unactivated by verizon and it should pop up after a minute or two should never take longer than 15 minutes the first time
make sure you have it set to nv only on lte handsets.
Need a guide for a specific model name it I'll write it for you step by step for a small fee.
Note I have not tested this on any apple product so cannot support them.
Between getting 1x and then going to target phone must be on airplane mode after esn on account is switched back
Read more: http://www.cricketusers.com/page-plus-cellular/38824-page-plus-3g-data-speeds-how.html#ixzz2VLa0LfsP
ANOTHER EDIT : SOMETHING I FORGOT ABOUT YOUR MMS
Steps to MMS (picture mail) configuration: This is only one way, but it works...
1. Open the messaging app and press menu and select settings.
2. Uncheck EVERY item in the settings and exit the app with the back button.
3. Open your browser and go to the URL "mms.ihavegreat.info" and download
4. Pull down the top of your screen and wait for the app to finish downloading
5. Tap the app to install and let it authorize and setup
6. Remove the stock messaging app from homescreen and replace with this new one.....(may also disable the original message app)
7. Reboot the phone and you should have working MMS
Click to expand...
Click to collapse
hello guys, my device is galaxy note 2, i updated my phone to android 4.3 manually, the update is successful, i got all the features of the new firmware, but i have a problem: the network connection signal is appearing normally but i can't do any call or send/receive a massage it says (not registered on network), no problems with the device's IMEI, is it because the room is not for my region?? or modem file problem? an help please
bilalmaskaleh said:
hello guys, my device is galaxy note 2, i updated my phone to android 4.3 manually, the update is successful, i got all the features of the new firmware, but i have a problem: the network connection signal is appearing normally but i can't do any call or send/receive a massage it says (not registered on network), no problems with the device's IMEI, is it because the room is not for my region?? or modem file problem? an help please
Click to expand...
Click to collapse
BTW you should post in Galaxy Note 2 Q&A forum ( use xda device search engine to locate it)
A modem change might give you results only after you have checked your APN ,
Quick Guide
First Check your settings > about phone > status > your phone number ( IF UNKNOWN )
You won't be able to send SMS by any third party sms apps or Have a Network connection
Solution :-
You need to edit that "unknown" number to your phone number, by putting your SIM card on any old phone that has a "my number/owner number" option, (most old phones do). Edit and save it to the proper phone format as your Sim Card number (Example: +63913XXXXXXX). Now put the SIM back to M110S, to solve this problem.
Than check your system settings, in Settings > Wireless & Networks > Mobile Networks > Access Point Names.(APN) as provided by your Network provider . If your Apn is not set, you wont be able to have data connection, so set it first
If still no data connection, Common Trick is to toggle WIFI and Airplane mode or
1. Turn ON WIFI
2. Set the phone to Flight Mode
3. Power down the phone for a few Minutes
4. Power it back up
5. Turn OFF flight mode
6. Turn OFF WIFI
Should get Data back
also read this
Check this out! Links to useful Guides and " Banned " Documentaries
I have received a p607t tablet, it was flashed by smb. to p905 firmare (with no imei). i re-flashed it with stock P607TUVUBOI2 firmware (4 files, so-called "service" firmare), imei is back (to what is printed at the back-side) but mobile networking *still* doesn't work: no connection. I'm using not t-mo sim-card, but looks like the tablet was already unlocked
From service menu *#0011#:
SERVICE : LIMITED
NETWORK : UNBLOCK
IMEI Certi: PASS, 1
From Advanced Signal Status:
Carrier:
Network Type: Unknown
Signal info: n/a
Neighboring CID: no neighboring cells --- wtf? >> other devices work ok with this sim in lte and 3g modes<<
GSM service: emergency calls only
GPRS service: disabled
Any ideas?
OK, so, what is done with p607t to the moment:
1) reflashed CP (modem/RF??) to latest stock (P607TUVUBOI2)
2) reflashed AP/PDA (core system??) and CSC (consumer stuff??) to P605XXU1EOI5 (from p605, have one right here - it never had network-lock from factory)
3) using qpst and qxdm changed nv parameters (extended lte bands, enabled gsm rf-bands - there were none in stock at all, only wcdma)
now the tablet sees my local gsm network with this sim-card, signal is 4/5 bars, but still no internet connection - WTF??
p.s. when trying manually to register in my local network - it fails with "try again later"
p.p.s.: what is i find weird, in service menu *#0011#:
NETWORK : UNBLOCK
- this line exists only on p607 - is this the key?
Then, i insert this sim into p605 (completely stock P605XXU1EOI5) - it works like a charm
need some help - where to dig next? point direction plz
UPDATE. i've been tweaking 607t nv items with qxdm, making it alike that ones 605 has. practically everything is alike now, but still it doesn't even try to establish data connection with cell...((
btw, 605 does not have "esf embedded file system", while 607t has one (can be seen through qpst-esf explorer)
also, some nv-items present in one model, some present in another
m4D2016 said:
UPDATE. i've been tweaking 607t nv items with qxdm, making it alike that ones 605 has. practically everything is alike now, but still it doesn't even try to establish data connection with cell...((
btw, 605 does not have "esf embedded file system", while 607t has one (can be seen through qpst-esf explorer)
also, some nv-items present in one model, some present in another
Click to expand...
Click to collapse
I had to flash back to the original kitkat firmware and take OTA to upgrade to lollipop. There is a known issue with the 607t losing data after roms are flashed. Some had luck with flashing the same rom twice but it never worked for me. Used Sam mobile to pull original and went from there. Good luck
I performed "device init and reflash" with Keis. The device is back to stock completely, except:
- nv items data
- esf embedded file system data
so... my guess - i need to restore these in order to have mobile networking working.
could someone post a qcn-file with factory esf-data?
ok, let's take another way: how can i get some gsm-module debug-output or log to understand, what's going on it?
i'm trying to write some custom modem.bin to /dev/block/mmcblk0p2, but after reboot data in there is reverted to stock modem.bin - how come?? is that bootloader doing? where is the stock-one stored?