Develop Bugs

Need help with CM10 install

Ok so it's been a while since I've done any new ROMs or anything, mainly did things on my GS2 but now going with the GS3 and have been for a little bit now. It's all rooted and everything fine, but I decided to finally install the CM10 ROM and am having a difficult time. I finally got it to install and boot up (had a slight issue with the boot loop which I got passed) but now my home screen says Sprint on the bottom. Maybe I downloaded the wrong CM10 zip? Or maybe they're all like this but I didn't think it was. On to the bigger problem, no mobile connection. I'm able to restore to my backed up status so that's what I'm going with for now but I'd really like to get this working. Any suggestions? Have I supplied enough info. Any help would be greatly appreciated, thanks to anyone that can give me some direction here.

You flashed the wrong zip.
for AT&T you need d2att http://get.cm/?device=d2att
If you need a different carrier then ATT try checking the CM10 thread http://forum.xda-developers.com/showthread.php?t=1778270

Randomacts said:
You flashed the wrong zip.
for AT&T you need d2att http://get.cm/?device=d2att
If you need a different carrier then ATT try checking the CM10 thread http://forum.xda-developers.com/showthread.php?t=1778270
Click to expand...
Click to collapse
Thank you for that! Will that solve the network problem too? Seems like something like that would solve my problem all together. Anything else I should know?

Imnice777 said:
Thank you for that! Will that solve the network problem too? Seems like something like that would solve my problem all together. Anything else I should know?
Click to expand...
Click to collapse
yeah it should if not go back to complete stock and try again.

If none of that works check in settings, about phone and make sure your imei number is still intact (not showing zeros).

Ok so my IMEI is still intact but that zip for AT&T didn't work, I got an error. I cleared cache and user data and chose it from my internal memory, not sure what the issue is except maybe my CWM is outdated? Wasn't sure if it'd be a problem but maybe that's it. Any other suggestions?
Sent from my SAMSUNG-SGH-I747 using xda premium

Might be an APN issue. Try adding the APN for your carrier and see if your data works. What error are you getting when you try to flash the at&t version?

jethro650 said:
Might be an APN issue. Try adding the APN for your carrier and see if your data works. What error are you getting when you try to flash the at&t version?
Click to expand...
Click to collapse
The error reads "asset failed: getprop("ro.product.device") == "d2att" l l getprop(("ro.build.product") == "d2att" E:error in /emmc/cm-10-20121024-NIGHTLY-d2att (1).zip (Status 7) Installation aborted."

Update your recovery.
Sent from my iPad 4

Update CWM recovery to latest version.

And you can get a newer version here. http://forum.xda-developers.com/showthread.php?p=28611956
Official ClockworkMod Recovery Images for AT&T

Ok so I figured it out and fixed it! All I had to do was update my CWM with ROM Manager like I thought I might have to do. I saw another thread with a similar issue, too so I guess this is somewhat common. Gotta update everything when it comes to this stuff. Thanks for all the responses though, I appreciate it.

Somehow I didn't see the replies telling me to update CWM before I.posted that I figured it out. Either way, I'm currently running it and all is awesome so far. If anyone has suggestions on specific things to do now?
Sent from my SAMSUNG-SGH-I747 using xda premium

please help
Hi there, i've been having issues trying to install cm10 since last week and it's been frustrating. After doing hours of search I found a thread that says I should reinstall cwm recovery. I've tried doing this with rom manager from google play but it didn't work. It says, make sure you have stable internet connection and that your sd card is installed and working. Now, do have to Odin again to flash the newest clockworkmod recovery. If not how do I do then cuz I keep getting aborted and every time have to restart system and set it up all over. by the way my phone is a galaxy s3 i747 android 4.0.4 rooted cwm 5.5.0.4. thanks

androidehca said:
Hi there, i've been having issues trying to install cm10 since last week and it's been frustrating. After doing hours of search I found a thread that says I should reinstall cwm recovery. I've tried doing this with rom manager from google play but it didn't work. It says, make sure you have stable internet connection and that your sd card is installed and working. Now, do have to Odin again to flash the newest clockworkmod recovery. If not how do I do then cuz I keep getting aborted and every time have to restart system and set it up all over. by the way my phone is a galaxy s3 i747 android 4.0.4 rooted cwm 5.5.0.4. thanks
Click to expand...
Click to collapse
Download this cwm 6.0.1.4 http://db.tt/te3vInsu , reboot into recovery and flash it, reboot recovery and flash cm10.

tonymtl said:
Download this cwm 6.0.1.4 http://db.tt/te3vInsu , reboot into recovery and flash it, reboot recovery and flash cm10.
Click to expand...
Click to collapse
that's not the problem, I already have the file. it's kind of my question, I keep getting aborted from the process of flashing. no errors, only aborted

androidehca said:
that's not the problem, I already have the file. it's kind of my question, I keep getting aborted from the process of flashing. no errors, only aborted
Click to expand...
Click to collapse
If that's the case I'd probably completely go back to stock and root with the updated CWM. Kind of a pain but might be your best bet. Updating for me was the solution. Try that and let me know how it goes.
Sent from my SAMSUNG-SGH-I747 using xda premium

[Q] Need help recovering my e4gt :(

I have rooted/flashed numerous phones and have only ever had issues with this phone. Anyways, enough with the intro...
history: had cm10 running fine but decided to try some ICS roms for better battery life / tethering with 4g still active.
-------
So I used odin 1.85, and have flashed StockCWM-EL26.tar.md5. This gets me CWM recovery 5.0.2.7, from here i tried to flash cm9 experimental build beta1 or something like that and it gives me a status 7.
I tried restoring a backup I had made previously but it failed saying mm blk9 or something like that. I believe these don't work because i had updated to the latest CWMR for the e4gt, but during flashing those custom ICS ROMS they flashed their own recovery
Odin appears to be the only thing that actually recognizes my phone. I can't get fastboot or adb to work in download mode. I believe fastboot should work. I mention this because the one click rooting methods sit waiting for me to plug in my phone.
I do have access to the SD card, so if i can get a ROM that CWMR 5.0.2.7 will flash i can put it on the card and try that. But again thats how i got to cm10 was from first installing this cm9 beta build.
Any ideas or useful info i left out that may help please let me know!

mohbandy said:
I have rooted/flashed numerous phones and have only ever had issues with this phone. Anyways, enough with the intro...
history: had cm10 running fine but decided to try some ICS roms for better battery life / tethering with 4g still active.
-------
So I used odin 1.85, and have flashed StockCWM-EL26.tar.md5. This gets me CWM recovery 5.0.2.7, from here i tried to flash cm9 experimental build beta1 or something like that and it gives me a status 7.
I tried restoring a backup I had made previously but it failed saying mm blk9 or something like that. I believe these don't work because i had updated to the latest CWMR for the e4gt, but during flashing those custom ICS ROMS they flashed their own recovery
Odin appears to be the only thing that actually recognizes my phone. I can't get fastboot or adb to work in download mode. I believe fastboot should work. I mention this because the one click rooting methods sit waiting for me to plug in my phone.
I do have access to the SD card, so if i can get a ROM that CWMR 5.0.2.7 will flash i can put it on the card and try that. But again thats how i got to cm10 was from first installing this cm9 beta build.
Any ideas or useful info i left out that may help please let me know!
Click to expand...
Click to collapse
I do not know much but it looks like the cm9 rom that you downloaded is a bad download, go back to Odin 1.85 and flash StockCWM-EL26.tar.md5. again and flash your cm10 rom or another rom to get back on track
Sent from my SPH-D710 using xda premium

jc.m said:
I do not know much but it looks like the cm9 rom that you downloaded is a bad download, go back to Odin 1.85 and flash StockCWM-EL26.tar.md5. again and flash your cm10 rom or another rom to get back on track
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I know I am trying to flash the proper cm10 rom (the one that worked before) because its the only cm10 rom on my SD card.
I'm pretty sure I followed this guide to make it all happen.
Is there a way i could flash the latest CWM recovery using ODIN? Then I would think this recovery would be able to restore my backups

Odin this:
http://shabbypenguin.com/k0/ecm/E4GT-EL29-directbootCWM-v3.tar.md5
goes in PDA slot in odin

calisro said:
Odin this:
http://shabbypenguin.com/k0/ecm/E4GT-EL29-directbootCWM-v3.tar.md5
goes in PDA slot in odin
Click to expand...
Click to collapse
Successfully used odin to flash this. I then tried using the cwm 5.0.2.7 recovery again to install cm9 and cm10, but both failed saying
Code:
assert failed: getprop("ro.product.device") == "d710" || getprop("ro.build.product") == "d710" || ..........
+several other options. I'm going to try another cm9 tonight unless anybody has another ROM suggestion *hint*hint*
I then tried to restore my backups, which said they couldn't find system/data. So then i tried advanced restore and selected boot which went fine, system gives my this:
Code:
E:format_volume: no MTD partition "/dev/block/mmcblk0p9"
Error while formatting /system!

mohbandy said:
Successfully used odin to flash this. I then tried using the cwm 5.0.2.7 recovery again to install cm9 and cm10, but both failed saying
Code:
assert failed: getprop("ro.product.device") == "d710" || getprop("ro.build.product") == "d710" || ..........
+several other options. I'm going to try another cm9 tonight unless anybody has another ROM suggestion *hint*hint*
I then tried to restore my backups, which said they couldn't find system/data. So then i tried advanced restore and selected boot which went fine, system gives my this:
Code:
E:format_volume: no MTD partition "/dev/block/mmcblk0p9"
Error while formatting /system!
Click to expand...
Click to collapse
You may also want to do a full restore look here http://www.sxtpdevelopers.com/showt...H-D710-FI27-(FI27-Modem-Kernel-ROM-Root-Stock
Sent from my SPH-D710 using xda premium

it lives!
I'm not sure where to give credit, but this is what secret sauce finally made things work..
a little bit of this
followed by using Odin v1.85, PDA loaded stock D710_CODE_SPH-D710.FI27_CL1127689_REV02_user_low_ship.tar.md5.7z from this link
So now that i at least have a booting device, i've been here before and can make my way to eventually restoring my backup.
thanks everyone!

mohbandy said:
I'm not sure where to give credit, but this is what secret sauce finally made things work..
a little bit of this
followed by using Odin v1.85, PDA loaded stock D710_CODE_SPH-D710.FI27_CL1127689_REV02_user_low_ship.tar.md5.7z from this link
So now that i at least have a booting device, i've been here before and can make my way to eventually restoring my backup.
thanks everyone!
Click to expand...
Click to collapse
Good to know that you are back on track
Sent from my SPH-D710 using xda premium

mohbandy said:
I'm not sure where to give credit, but this is what secret sauce finally made things work..
a little bit of this
followed by using Odin v1.85, PDA loaded stock D710_CODE_SPH-D710.FI27_CL1127689_REV02_user_low_ship.tar.md5.7z from this link
So now that i at least have a booting device, i've been here before and can make my way to eventually restoring my backup.
thanks everyone!
Click to expand...
Click to collapse
Credit goes to sfhub, who we hope will be back at some point!

For what its worth, now that I am back to where I originally started...
The CM10 I was flashing was putting CWM v6.0.1.7 (i believe) on my device. I made my backup using this and was able to restore to this after a failed boot of my CM10 downloaded ROM.
At this point, i then flashed the latest officially supported CWM version as reported from the cwm site. I then made another backup, this time using CWM v5.0.2.7 and now feel more comfortable/confident having the ability to re-flash this guy.

[Q] Seriously Frustrated

So, I recently rooted my i747 and used Odin to load CWM v5.5.04 on my phone. I backed everything up, and proceeded to get into recovery to flash a new ROM, so I wiped as needed and I cannot install a ROM.
Particularly, this ROM: http://www.androidauthority.com/galaxy-s3-i747-jelly-bean-paranoidkangdroid-rom-143982/
This comes up whenever I try:
"assert failed: getprop("ro.product.device") == "d2att" || getprop("ro.product.device") == "d2att"
E:Error in /sdcard/PAC Man/ PK-1.40-d2att.zip
(Status 7)
Installation Aborted
It also happens when I try installing PAC Man.
HELPPP

Encerspay said:
So, I recently rooted my i747 and used Odin to load CWM v5.5.04 on my phone. I backed everything up, and proceeded to get into recovery to flash a new ROM, so I wiped as needed and I cannot install a ROM.
Particularly, this ROM: http://www.androidauthority.com/galaxy-s3-i747-jelly-bean-paranoidkangdroid-rom-143982/
This comes up whenever I try:
"assert failed: getprop("ro.product.device") == "d2att" || getprop("ro.product.device") == "d2att"
E:Error in /sdcard/PAC Man/ PK-1.40-d2att.zip
(Status 7)
Installation Aborted
It also happens when I try installing PAC Man.
HELPPP
Click to expand...
Click to collapse
First of all, take a deep breath. It can get pretty frustrating and that's when you make mistakes that lead into a brick.
You might wanna look into a newer CWM or TWRP (GooManage in the market).
Have you tried flashing another ROM? Also, did you grab the version for the i747?

Encerspay said:
So, I recently rooted my i747 and used Odin to load CWM v5.5.04 on my phone.
Click to expand...
Click to collapse
Here is the issue. This version is outdated. CWM is on 6 point something now. Load the latest version and you should be able to flash the ROM of your choice. :highfive:

Gee, thanks guys!! It's comforting to a little nooblet such as myself to have help from members.
How can I load another recovery, though? I've already wiped everything

Encerspay said:
Gee, thanks guys!! It's comforting to a little nooblet such as myself to have help from members.
How can I load another recovery, though? I've already wiped everything
Click to expand...
Click to collapse
Get in download mode and flash stock. From there, get GooManager from the market, open it, hit menu and install the recovery. Finally, you can get in recovery and flash the ROM + Gapps you want.

Encerspay said:
Gee, thanks guys!! It's comforting to a little nooblet such as myself to have help from members.
How can I load another recovery, though? I've already wiped everything
Click to expand...
Click to collapse
I followed this guide
http://forum.xda-developers.com/showthread.php?t=1739426
Starting from THIRD step, you can either use adb or grab a terminal emulator from the play store.
BWolf56 said:
Get in download mode and flash stock. From there, get GooManager from the market, open it, hit menu and install the recovery. From there, you can get in recovery and flash the ROM + Gapps you want.
Click to expand...
Click to collapse
That's twice you beat me. I need to learn to type faster.

Encerspay said:
Gee, thanks guys!! It's comforting to a little nooblet such as myself to have help from members.
How can I load another recovery, though? I've already wiped everything
Click to expand...
Click to collapse
If you want to stick with cwm, flash stock s3 firmware and root again. Boot up, download rom manager and "update recovery". That will install version 6.0.2.3

BYOBret said:
I followed this guide
http://forum.xda-developers.com/showthread.php?t=1739426
Starting from THIRD step, you can either use adb or grab a terminal emulator from the play store.
That's twice you beat me. I need to learn to type faster.
Click to expand...
Click to collapse
Haha sorry, boring day at work makes me extra productive here
xBeerdroiDx said:
If you want to stick with cwm, flash stock s3 firmware and root again. Boot up, download rom manager and "update recovery". That will install version 6.0.2.3
Click to expand...
Click to collapse
One thing though, uninstall ROM Manager afterwards and don't use it for anything else than installing the custom recovery if you decide to go with CWM instead of TWRP.

I was planning on using Goo Manager after restoring my only nandroid backup, but it's corrupt.... Go Figure. :crying:
Anyway, I'm a bit confused on what is trying to be meant by flashing stock in download mode...
How does one go about doing that?

Encerspay said:
I was planning on using Goo Manager after restoring my only nandroid backup, but it's corrupt.... Go Figure. :crying:
Anyway, I'm a bit confused on what is trying to be meant by flashing stock in download mode...
How does one go about doing that?
Click to expand...
Click to collapse
There's a link to stock firmwares on the android development link. It has carrier downloads and instructions. There's a link just below the downloads that has the stock firmware downloads with root already injected

Encerspay said:
I was planning on using Goo Manager after restoring my only nandroid backup, but it's corrupt.... Go Figure. :crying:
Anyway, I'm a bit confused on what is trying to be meant by flashing stock in download mode...
How does one go about doing that?
Click to expand...
Click to collapse
Below is your answer:
BYOBret said:
I followed this guide
http://forum.xda-developers.com/showthread.php?t=1739426
Starting from THIRD step, you can either use adb or grab a terminal emulator from the play store.
That's twice you beat me. I need to learn to type faster.
Click to expand...
Click to collapse

Encerspay said:
So, I recently rooted my i747 and used Odin to load CWM v5.5.04 on my phone. I backed everything up, and proceeded to get into recovery to flash a new ROM, so I wiped as needed and I cannot install a ROM.
Particularly, this ROM: http://www.androidauthority.com/galaxy-s3-i747-jelly-bean-paranoidkangdroid-rom-143982/
This comes up whenever I try:
"assert failed: getprop("ro.product.device") == "d2att" || getprop("ro.product.device") == "d2att"
E:Error in /sdcard/PAC Man/ PK-1.40-d2att.zip
(Status 7)
Installation Aborted
It also happens when I try installing PAC Man.
HELPPP
Click to expand...
Click to collapse
This happens because you most likely have a i747m (Canadian S3). I have had this problem before and it is easy to fix. The recovery checks to see if you a flashing the right rom for your device, and it sees that the rom is an At&t one. Easy fix though, go into a file manager, I used total commander, and find the rom you are trying to flash, click the file, then META-INF>com>google>android> and then long press on updater-script. Unpack+edit, and delete the first line, which refers to it being an At&t rom. Save the file, reboot and make sure the change sticks, then flash away!

I live in the US, and I am on at&t. I did, however, order a refurb model.
Is it possible I could have gotten a Candian Model?
As of now, I am downloading the at&t stock rom from sammobile.com and I plan on installing it via Odin and then re rooting, followed by a Titanium Backup, then installing Goo Manager to get the latest CWM Recovery, finally getting my ROM on and I'll finish it off with a Titanium Backup.
Sounds like a 4-5 hour process. Awesome.
I just like to write everything down before I do it. Thanks so much guys!

Encerspay said:
I live in the US, and I am on at&t. I did, however, order a refurb model.
Is it possible I could have gotten a Candian Model?
As of now, I am downloading the at&t stock rom from sammobile.com and I plan on installing it via Odin and then re rooting, followed by a Titanium Backup, then installing Goo Manager to get the latest CWM Recovery, finally getting my ROM on and I'll finish it off with a Titanium Backup.
Sounds like a 4-5 hour process. Awesome.
I just like to write everything down before I do it. Thanks so much guys!
Click to expand...
Click to collapse
Definitely not that long of a process unless it's the download time.
Twrp comes from goo manager and titanium backup is apps. I think you meant nandroid.
I'm not trying to nitpick misunderstanding the processes and steps are a quick way to a brick.
Sent from my SGH-I747 using xda app-developers app

KorGuy123 said:
Definitely not that long of a process unless it's the download time.
Twrp comes from goo manager and titanium backup is apps. I think you meant nandroid.
I'm not trying to nitpick misunderstanding the processes and steps are a quick way to a brick.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
No, no, I understand. TWRP is what I meant, and since my nandroid is corrupt, I'm just going to restore the apps with Titanium.
Download time is definitely awful over here with at&t DSL rockin' 0.22 mbps.

Encerspay said:
No, no, I understand. TWRP is what I meant, and since my nandroid is corrupt, I'm just going to restore the apps with Titanium.
Download time is definitely awful over here with at&t DSL rockin' 0.22 mbps.
Click to expand...
Click to collapse
Awesome! Lol see you in a couple hours
Sent from my SGH-I747 using xda app-developers app

This is what I personally would do
1st. Odin to a stock rooted ROM
2nd. Once its all booted up download GooManager from play and install the recovery directly from GooManager (make sure its the correct recovery for your device. Its TWRP recovery)
3rd. Once installed reboot into recovery
Wipe, install, fix permissions, the whole 9
4th. Victory
I would recommend TWRP over CMW
Very few bugs, it fixes your internal partitions when going back and forth from 4.1 to 4.2 and making Nands is 1million times faster then CMW .. No status 7 or 0 errors
Sent from an ATM machine

Encerspay said:
I live in the US, and I am on at&t. I did, however, order a refurb model.
Is it possible I could have gotten a Candian Model?
As of now, I am downloading the at&t stock rom from sammobile.com and I plan on installing it via Odin and then re rooting, followed by a Titanium Backup, then installing Goo Manager to get the latest CWM Recovery, finally getting my ROM on and I'll finish it off with a Titanium Backup.
Sounds like a 4-5 hour process. Awesome.
I just like to write everything down before I do it. Thanks so much guys!
Click to expand...
Click to collapse
Does your phone boot up normally now, as is? If so, all you need is the new recovery.
http://forum.xda-developers.com/show....php?t=1739426
Starting from THIRD step, you can either use adb or grab a terminal emulator from the play store.
Really, only takes a couple minutes. Copy recovery.img file to your phone's internal /sdcard and then run the adb commands.

Erm, not exactly, I have a stock file for my phone (no root, but my speeds are so slow I'll just go through rooting again)
Odin can't load it.
So now I have a phone that can't boot.
What should I do with this tar.md5 file I have, exactly?
I'm lost here

Encerspay said:
Erm, not exactly, I have a stock file for my phone (no root, but my speeds are so slow I'll just go through rooting again)
Odin can't load it.
So now I have a phone that can't boot.
What should I do with this tar.md5 file I have, exactly?
I'm lost here
Click to expand...
Click to collapse
Remove the ".md5" from the file name so it ends with ".tar" and ODIN should load it correctly.... maybe, hold on.
edit: How did you attempt this first? Does ODIN give any error messages?
Here is ODIN procedure:
Use Odin, put phone into download mode [with phone off, hold vol. down + home + power ], connect to computer and open Odin.
once in odin click the PDA field and select the rom_xxx.tar.md5 you downloaded.
Leave Auto Reboot and F. Reset Time checked.
click start and
when done let phone reboot.
If you have issues flashing with Odin please ensure you are using the microusb cable that came with the phone, users have had issues using other cables.

Stock Nandroid

I tried to flash to Intergalactic Rom and it failed, so I tried to flash it again, but when I was wiping the files I accidentally wiped my SD card with my nandroid. So does anyone have one they can upload or another idea? Thanks.

CipherC233 said:
I tried to flash to Intergalactic Rom and it failed, so I tried to flash it again, but when I was wiping the files I accidentally wiped my SD card with my nandroid. So does anyone have one they can upload or another idea? Thanks.
Click to expand...
Click to collapse
what was the error message?
if we find your problem is not fixable via flashing a different rom, etc, you could consider downloading and flashing stock firmware in odin and starting over

Reason for most failed installs is outdated recovery or bad download. Just download a ROM again and put it on your ext ad card. Flash an updated recovery in Odinand then flash the new ROM.
Sent from my SAMSUNG-SGH-I747 using xda premium

Alright, sorry I was in a rush to get back to work.
"assert failed: getprop( … ) == "d2att" E: Error in /emmc/Intergalactic_v2.8.zip "
That is the error that I am getting when I try to flash it. I searched the page and found that the error is because my CWM is out-of-date.
It flashed the second time I tried which is what bricked the phone, so now I can't upgrade my CWM via the two ways that I have found online which both require a working ROM.
If I can flash another ROM with CWM 5.5 that would be great. If anyone knows of a ROM that is compatible please let me know.

CipherC233 said:
Alright, sorry I was in a rush to get back to work.
"assert failed: getprop( … ) == "d2att" E: Error in /emmc/Intergalactic_v2.8.zip "
That is the error that I am getting when I try to flash it. I searched the page and found that the error is because my CWM is out-of-date.
It flashed the second time I tried which is what bricked the phone, so now I can't upgrade my CWM via the two ways that I have found online which both require a working ROM.
If I can flash another ROM with CWM 5.5 that would be great. If anyone knows of a ROM that is compatible please let me know.
Click to expand...
Click to collapse
here's a link to a cwm recovery flashable update. this is cwm 6.0.2.3. should work. flash it in cwm then "reboot recovery"
http://d-h.st/8qP
and if you want to make sure it's done right, here's a compilation of the best way to root/flash/backup your device. stick with these methods and you'll have far fewer problems
http://forum.xda-developers.com/showthread.php?t=2179330

Thanks, but the update was a No-Go. It's giving me the getprop error again. I'll just suck it up and start over.

CipherC233 said:
Thanks, but the update was a No-Go. It's giving me the getprop error again. I'll just suck it up and start over.
Click to expand...
Click to collapse
odin back to stock. here is a link to stock firmware with root already injected. download the correct carrier version and flash in odin. http://forum.xda-developers.com/showthread.php?t=1739426
install rom manager (http://download.clockworkmod.com/recoveries/RomManager.apk). flash recovery via rom manager. i think latest release is 6.0.3.0. make sure rom is still on your phone.
boot into recovery and make a backup before you do anything else.
then wipe data
wipe cache and dalvik
install rom
after successful boot, wait 10 minutes and reboot.
---------- Post added at 11:41 PM ---------- Previous post was at 11:29 PM ----------
While you're back at the beginning, I would take the time to backup your imei/efs stuff. Better safe than sorry. This is a step that many skip.
This is a beginning to end guide
http://forum.xda-developers.com/showthread.php?t=2179330
Cheers

Can't install cm10 updates. weird issues

hey guys, first post. had a weird issue after downloading RC2. i wasn't getting a clear signal anymore for some reason. this was a few days after a few newer updates, so i installed the best reviewed one. ended up getting bootlooped. tried reverting back to RC2 but kept getting an error. installation failed. so kept going back on the updates and wasn't able to install ANY of them. so i switched to slimbean.
now, i can't restore system data with titanium, because that causes me to go back to bootloop, which is understandable because cm10 and slimbean are different. i'm mainly looking for a solution to get cm10 back. i don't remember the EXACT code that it kept giving me, and i don't feel like bootlooping my phone by doing it all over again.. but essentially what i read was that it's what verifies that i'm installing it on the right phone (which i am.)
i just want cm10 back, but can't get it because of THAT code which pops up on every nightly. any ideas on what my issue is?
i'm moderately technical, so i won't ask to explain like i'm 5... but...maybe explain like i'm 10.

Ok try this real simple and should get you going. http://db.tt/Qt6NcH0a this is the baseband /firmware aio zip for md4. The new cm10 roms have a built in script checker to make sure your phone is updated to the latest bootloader. Just flash this in recovery boot up and your baseband should be md4 it also updated the bootloader. Then go back into recovery and flash your cm rom and gapps you should be golden.
Sent from the future via Xparent Green Tapatalk 2

You need to be on the newest MD4 firmware for the new builds to flash.
This goes for all new AOSP roms now, not just CM

edfunkycold said:
Ok try this real simple and should get you going. [had to delete the link] this is the baseband /firmware aio zip for md4. The new cm10 roms have a built in script checker to make sure your phone is updated to the latest bootloader. Just flash this in recovery boot up and your baseband should be md4 it also updated the bootloader. Then go back into recovery and flash your cm rom and gapps you should be golden.
Sent from the future via Xparent Green Tapatalk 2
Click to expand...
Click to collapse
thank you very much! will try now.
and an edit. didnt work. exact error is
assert failed: getprop(ro.bootloader") == "L710vpblj7" II getprop(ro.bootlaoder") == "L710vpbma6 ll getprop(ro.bootlaoder") == "L710vpbmb1" ll getprop(ro.bootlaoder") == "L710vpbmd4"
E:error in /external_sd/cm-10.1.0-rc4-d2spr.zip (status 7)
installation aborted
final edit. fixed it. didn't know to reboot into recovery after installing it! thanks! it worked.

nickgenova said:
thank you very much! will try now.
final edit. fixed it. didn't know to reboot into recovery after installing it! thanks! it worked.
Click to expand...
Click to collapse
Glad it worked! Enjoy:thumbup:
Sent from the future via Xparent Green Tapatalk 2