Develop Bugs

[Q]How to install cm9 rc1

How to installl cm9 rc1 a clear and detailed guide and one with fully working wifi

xperiaplayicsuser2013 said:
How to installl cm9 rc1 a clear and detailed guide and one with fully working wifi
Click to expand...
Click to collapse
Hi
There is the guide: wiki.cyanogenmod.com/wiki/Sony_Ericsson_Xperia_Play_%28GSM%29:_Full_Update_Guide
If you got problems with reboot use boot.img from previous one.
I had that yeterday and flashed from previous and everything run smoothly.
Hope it help.
Bartmw

bartmw said:
Hi
There is the guide: wiki.cyanogenmod.com/wiki/Sony_Ericsson_Xperia_Play_%28GSM%29:_Full_Update_Guide
If you got problems with reboot use boot.img from previous one.
I had that yeterday and flashed from previous and everything run smoothly.
Hope it help.
Bartmw
Click to expand...
Click to collapse
thanks for the relpy but that links is invalid everything runs smoothly on mine is well but the wifi recognizing the network dosent everyone semms to have it working i dont know e=why maybe beacuse im a huge noob

xperiaplayicsuser2013 said:
thanks for the relpy but that links is invalid everything runs smoothly on mine is well but the wifi recognizing the network dosent everyone semms to have it working i dont know e=why maybe beacuse im a huge noob
Click to expand...
Click to collapse
Maybe try different kernel, there is new Mjolnir Kernel. You can fastboot it no need to install system from scratch after.

Hello,
I downloaded the CM9 RC1 from the cyanogenMod page, here's the link, http://download.cyanogenmod.com/?device=zeus&type=RC
The kernel is inside the zip (boot.img).
Put the .zip file you downloaded into the SDcard
copy the boot.img that comes inside the .zip to the folder where you have the flashing tools.
flash this kernel (You know how to do that, right?)
unplug from computer the cel and turn on, a freexperia logo appear and when the light in the power button turns on, press and keep pressed the down volume button. you'll enter to the recovery menu.
in the recovery (use the volume buttons to move and home button to enter), wipe data/fatory reset, then wipe cache partition and go advanced/wipe Dalvik Cache.
Still on the recovery, back to main menu (use the back button) and go to install zip from sdcard, then go to choose a zip from sdcard. You will see the files on your card, search for the downloaded .zip and install it.
when finish, go to main menu and choose reboot system now, and that's it!
That worked for me.... hope this will help you to install the CM9 :fingers-crossed:
Cheers :good:
---------- Post added at 10:41 PM ---------- Previous post was at 10:32 PM ----------
Hello,
Also, Don´t forget to download the google apps .zip file.
Put it in the same place you put the CM9 rom into the sdcard. on step 6, when the installation of the rom finish, before rebboting the phone, repeat the step 6 but choose the googles apps .zip file and there you go!
the link for the CM9 google apps is: http://cmw.22aaf3.com/gapps/gapps-ics-20120317-signed.zip
Cheers! :good:

hey need a little help here..
i'm a noob too and i wanna try this CM9 rom but i keep failing on rebooting my phone
i'm using darkforest v4 and doomkernel ICS v3 now
what seems to be the problem?
thanks in advance

yukarundeng said:
hey need a little help here..
i'm a noob too and i wanna try this CM9 rom but i keep failing on rebooting my phone
i'm using darkforest v4 and doomkernel ICS v3 now
what seems to be the problem?
thanks in advance
Click to expand...
Click to collapse
You have to use a kernel which is made for cm9. Doomkernel and darkforest kernel are made for sony ics beta rom.
Sorry for my bad English. It's not my native language.

Xcited android user said:
You have to use a kernel which is made for cm9. Doomkernel and darkforest kernel are made for sony ics beta rom.
Sorry for my bad English. It's not my native language.
Click to expand...
Click to collapse
yes thank you no worries bro
i downloaded the wrong file yesterday, that's why i'm stucked
thanks to you again

[Q] What kind of brick is this?

I flashed a new ROM after an annoying bug from the previous ROM,then I installed some applications (including busybox),restarted it without problems,but after the next restart it was bootlooping (I don't know why,I didn't installed any other application after the first restart).I did a factory reset,I wiped the data,cache,dalvik cache,but it was still bootlooping.I wiped it again and I tried to flash another ROM (and yes,they were all compatible with my phone,and I respected the instructions,I flashed a lot of ROMs before),but,again,it was bootlooping.I wiped it one more time,and I performed a nandroid restore (from another ROM),but it was still bootlooping.WTF?I have never experienced a thing like this.Should I try to flash a ROM (stock,GioPro) with Odin?What if it would still bootloop?What should I do?
BTW:I don't know if this is important,but before I preformed the nandroid restore,I accidentally made a backup (it was made very fast),and I noticed that the date was messed up(showing year 1970).It says that it has only 16mb and the only folder existing in /system is lost+found.However,I can see my boot animation
Sorry for the eventually spelling mistakes.

ODIN
aveq8 said:
I flashed a new ROM after an annoying bug from the previous ROM,then I installed some applications (including busybox),restarted it without problems,but after the next restart it was bootlooping (I don't know why,I didn't installed any other application after the first restart).I did a factory reset,I wiped the data,cache,dalvik cache,but it was still bootlooping.I wiped it again and I tried to flash another ROM (and yes,they were all compatible with my phone,and I respected the instructions,I flashed a lot of ROMs before),but,again,it was bootlooping.I wiped it one more time,and I performed a nandroid restore (from another ROM),but it was still bootlooping.WTF?I have never experienced a thing like this.Should I try to flash a ROM (stock,GioPro) with Odin?What if it would still bootloop?What should I do?
BTW:I don't know if this is important,but before I preformed the nandroid restore,I accidentally made a backup (it was made very fast),and I noticed that the date was messed up(showing year 1970).It says that it has only 16mb and the only folder existing in /system is lost+found.However,I can see my boot animation
Sorry for the eventually spelling mistakes.
Click to expand...
Click to collapse
Flash A stock rom with odin 4.42 and start from scratch! :highfive: :fingers-crossed:

waqaswasil said:
Flash A stock rom with odin 4.42 and start from scratch! :highfive: :fingers-crossed:
Click to expand...
Click to collapse
I flashed GioPro 1.6 (I know it's old),it worked,but I couldn't see the settings app,so I copied one from CM 7.2 with adb,and guess what? It bootlooped.Even after I wiped data and cache (I can't wipe dalvik because of CWM 5.0.2.7) and now I can't even see the boot animation,it just restarts after "Galaxy Gio".Tomorrow I will try to flash the stock one(enough with flashes for today).Can you send me the link for the stock rom(I can't find it)?

aveq8 said:
I flashed GioPro 1.6 (I know it's old),it worked,but I couldn't see the settings app,so I copied one from CM 7.2 with adb,and guess what? It bootlooped.Even after I wiped data and cache (I can't wipe dalvik because of CWM 5.0.2.7) and now I can't even see the boot animation,it just restarts after "Galaxy Gio".Tomorrow I will try to flash the stock one(enough with flashes for today).Can you send me the link for the stock rom(I can't find it)?
Click to expand...
Click to collapse
Dont Worry, It Will Be Fixed
Just Do This:
1. Download A Good Custom Rom (Like Maclaw's CM9 As I Am Using This Right Now)
2. Download CWM 6.0.3.2 By MMB Team
3. Flash CWM Like You Would Flash A ROM
4. Reboot Recovery, Now You Will See The New Recovery With Greenish Background
5. Go To "Mounts And Storages" And Format System
6. Go To "Install ZIP From SD Card" And Flash The Rom
7. Now "Wipe Data/Factory Reset"
8. Reboot System Now
Your Phone Will Be Fixed If You Follow All The Instructions.
Link For CWM 6.0.3.2 By MMB Team:
https://moltenmotherboard.googlecode.com/files/cwm-6.0.3.2-ext4only.zip
---------- Post added at 07:43 AM ---------- Previous post was at 07:29 AM ----------
Or Do This:
1. Go To "Mount And Storages" And Try To Mount System/Data/Cache
0. If You cant mount even one of them download and flash this (https://moltenmotherboard.googlecode.com/files/EXT4-formatter.zip) with your existing recovery and then flash any rom (dont flash any old rom as they use RFS File System All of the newer ROMS Use ext4 FileSystem) :laugh: :good: :highfive:
---------- Post added at 07:48 AM ---------- Previous post was at 07:43 AM ----------
or if you want to flash stock rom with odin, download stock roms from here for your region:
http://www.sammobile.com/firmwares/1/
(You need to register an account to download files from sammobile) :laugh::laugh:

waqaswasil said:
Dont Worry, It Will Be Fixed
Just Do This:
1. Download A Good Custom Rom (Like Maclaw's CM9 As I Am Using This Right Now)
2. Download CWM 6.0.3.2 By MMB Team
3. Flash CWM Like You Would Flash A ROM
4. Reboot Recovery, Now You Will See The New Recovery With Greenish Background
5. Go To "Mounts And Storages" And Format System
6. Go To "Install ZIP From SD Card" And Flash The Rom
7. Now "Wipe Data/Factory Reset"
8. Reboot System Now
Your Phone Will Be Fixed If You Follow All The Instructions.
Link For CWM 6.0.3.2 By MMB Team:
https://moltenmotherboard.googlecode.com/files/cwm-6.0.3.2-ext4only.zip
---------- Post added at 07:43 AM ---------- Previous post was at 07:29 AM ----------
Or Do This:
1. Go To "Mount And Storages" And Try To Mount System/Data/Cache
0. If You cant mount even one of them download and flash this (https://moltenmotherboard.googlecode.com/files/EXT4-formatter.zip) with your existing recovery and then flash any rom (dont flash any old rom as they use RFS File System All of the newer ROMS Use ext4 FileSystem) :laugh: :good: :highfive:
---------- Post added at 07:48 AM ---------- Previous post was at 07:43 AM ----------
or if you want to flash stock rom with odin, download stock roms from here for your region:
http://www.sammobile.com/firmwares/1/
(You need to register an account to download files from sammobile) :laugh::laugh:
Click to expand...
Click to collapse
Thanks,I will try.Is CM7 fine?It's less laggy for me.And if it is,should I use the "ext4 formatter"?because now it's rfs

Flash your default firmware or download a compatible rom
Sent from my GT-S7562 using xda app-developers app

aveq8 said:
Thanks,I will try.Is CM7 fine?It's less laggy for me.And if it is,should I use the "ext4 formatter"?because now it's rfs
Click to expand...
Click to collapse
first flash ext4 formatter and then the rom
Yup CM7 has less lag and better battery life as compared to CM9/10/11:laugh:

waqaswasil said:
first flash ext4 formatter and then the rom
Yup CM7 has less lag and better battery life as compared to CM9/10/11:laugh:
Click to expand...
Click to collapse
It worked!I hope it doesn't bootloop again after installing some applications -_-

aveq8 said:
It worked!I hope it doesn't bootloop again after installing some applications -_-
Click to expand...
Click to collapse
Seems like I asked for too much.Who needs applications,anyway?I don't mind reflashing the ROM after installing one...

aveq8 said:
Seems like I asked for too much.Who needs applications,anyway?I don't mind reflashing the ROM after installing one...
Click to expand...
Click to collapse
Just Dont Try To Change System Apps With Apps That Are Not Compatible and use a good custom rom. Some Best Custom ROMS are:
CM7 By MMB Team (and all others based on it)
CM9 By Maclaw Studio
CM10.1 By Mardon
:silly:

waqaswasil said:
Just Dont Try To Change System Apps With Apps That Are Not Compatible and use a good custom rom. Some Best Custom ROMS are:
CM7 By MMB Team (and all others based on it)
CM9 By Maclaw Studio
CM10.1 By Mardon
:silly:
Click to expand...
Click to collapse
I didn't.I installed the same apps that I had before it was bricked.I will try again without installing any app.
EDIT:I followed the same instructions more than once (tried to wipe everything),tried 3-4 different ROMs but it's still bootlooping.Also,I noticed the following error in CWM "can't format unknown volume /emmc".I think I should buy a new phone,lol...

There's Still Hope!!!
aveq8 said:
I didn't.I installed the same apps that I had before it was bricked.I will try again without installing any app.
EDIT:I followed the same instructions more than once (tried to wipe everything),tried 3-4 different ROMs but it's still bootlooping.Also,I noticed the following error in CWM "can't format unknown volume /emmc".I think I should buy a new phone,lol...
Click to expand...
Click to collapse
Download A stock rom for you region from the link that i gave and flash it via ODIN V4.42
Search For A Tutorial and if you cant under it, just reply and i will post an easier one (step-by-step guide) for you :victory:

Optimus G E975 Lucky Rom V1 Kit Kat 4.4.2

Hello everybody This is Lucky Rom V1, based on Korean V30C L. All the credit goes to @hyunhnhan886. I`m just sharing his work.
As always I am not responsible if you brick your device. You are doing this at your own risk.
So, to start off, make sure you`re using jelly bean E975H rom ( http://lg-phone-firmware.com/index.php?id_mod=20 ), that you have an unlocked bootloader (mako method)
( https://play.google.com/store/apps/details?id=edu.shell.freegee_free ) and a working cwm ( i used philz touch cwm https://drive.google.com/folderview...sharing&tid=0B9EFp1W1O3f2SXp2bVcycXpfRkU#list - while downloading make sure to select e975 version )
1. Put the Lucky Rom archive, patch and the europe e975h modem on your internal storage ( links down below )
2. Boot into recovery by turning off your phone and holding volume up + power button > scroll down two times until you see "Recovery" and press Power button
3. In Philz CWM select wipe data/factory reset ( DO NOT select "install a new rom" ), wipe cache and dalvik cache
4. Go to "Install zip" > "Install zip from sd card" > find your ROM archive and flash it
5. Go to "mounts and storage" and select "mount system", wait a few seconds and then unmount it
6. Once more go to "Install zip" > select patch and flash it
7. After that select e975h_europe modem and flash it, just to be on the safe side
8. Wipe data/factory reset, wipe cache and dalvik cache and boot your phone
I`ve installed the rom without any problems. I haven`t seen any bugs so far. I`m able to charge with the phone turned off. You dont need to unlock the bootloader, it will not give a secure boot error, at least I didnt have that problem. And there is no need to install super su, it comes with the rom.
Features available are:
qslide
slide aside
smart cleaning
Phone name is E975.. It doesnt change it to F180
Available network modes are: LTE/CDMA, EvDo only, CDMA w/o EvDo, CDMA/ EvDo auto, GSM/CDMA auto, WCDMA auto, GSM only, GSM/WCDMA preferred, GSM/WCDMA/LTE auto
It includes sync optimization for battery saving.
I`ll post screenshots later today.
Lucky Rom V1 https://docs.google.com/file/d/0B0TLQ64WWs-DTHBRSlAyMGJwSjg/edit?pli=1
Patch http://www.fshare.vn/file/T8A9XX7CRT
E975h_europe_modem https://www.dropbox.com/s/rzpnlwu1lofpq2f/cwm-lgog_e975-europe-10h_modem.zip
1. http://prntscr.com/3t2y4w
2. http://prntscr.com/3t2y8u
3. http://prntscr.com/3t2ycu
4. http://prntscr.com/3t2yhi
5. http://prntscr.com/3t2ylc
6. http://prntscr.com/3t2yod
7. http://prntscr.com/3t2ys5
8. http://prntscr.com/3t2yw7
9. http://prntscr.com/3t2z2b
10.http://prntscr.com/3t2z7g
11.http://prntscr.com/3t2xh5
12.http://prntscr.com/3t2y06

Multi language? Or Korean only?
Enviado de meu LG-E975 usando Tapatalk

Pics?

cldborges said:
Multi language? Or Korean only?
Enviado de meu LG-E975 usando Tapatalk
Click to expand...
Click to collapse
multi language. i will post pictures later today.
Sent from my LG-E975 using XDA Free mobile app

What about battery drain during standby ? AndroidOS big % in battery stats ?

Stachura5 said:
Pics?
Click to expand...
Click to collapse
AHA,another Monsterkitten! Sorry Off-Topic.
@Brontok Also,how can i flash with a smaller system partition?

Thanks.
Please tell me if this ROM has the caller and sms UI has Sling ROM.
Does it have Flashlight?
Sent from my LG-E975 using Tapatalk

rimsilva said:
Thanks.
Please tell me if this ROM has the caller and sms UI has Sling ROM.
Does it have Flashlight?
Sent from my LG-E975 using Tapatalk
Click to expand...
Click to collapse
it doesnt have flashlight, you can install a 3rd party app.. i`ve posted several pictures , take a look.

Brontok said:
Hello everybody This is Lucky Rom V1, based on Korean V30C L. All the credit goes to @hyunhnhan886. I`m just sharing his work.
As always I am not responsible if you brick your device. You are doing this at your own risk.
So, to start off, make sure you`re using jelly bean E975H rom ( http://lg-phone-firmware.com/index.php?id_mod=20 ), that you have an unlocked bootloader (mako method)
( https://play.google.com/store/apps/details?id=edu.shell.freegee_free ) and a working cwm ( i used philz touch cwm https://drive.google.com/folderview...sharing&tid=0B9EFp1W1O3f2SXp2bVcycXpfRkU#list - while downloading make sure to select e975 version )
1. Put the Lucky Rom archive, patch and the europe e975h modem on your internal storage ( links down below )
2. Boot into recovery by turning off your phone and holding volume up + power button > scroll down two times until you see "Recovery" and press Power button
3. In Philz CWM select wipe data/factory reset ( DO NOT select "install a new rom" ), wipe cache and dalvik cache
4. Go to "Install zip" > "Install zip from sd card" > find your ROM archive and flash it
5. Go to "mounts and storage" and select "mount system", wait a few seconds and then unmount it
6. Once more go to "Install zip" > select patch and flash it
7. After that select e975h_europe modem and flash it, just to be on the safe side
8. Wipe data/factory reset, wipe cache and dalvik cache and boot your phone
I`ve installed the rom without any problems. I haven`t seen any bugs so far. I`m able to charge with the phone turned off. You dont need to unlock the bootloader, it will not give a secure boot error, at least I didnt have that problem. And there is no need to install super su, it comes with the rom.
Features available are:
qslide
guest mode
slide aside
smart cleaning
Phone name is E975.. It doesnt change it to F180
Available network modes are: LTE/CDMA, EvDo only, CDMA w/o EvDo, CDMA/ EvDo auto, GSM/CDMA auto, WCDMA auto, GSM only, GSM/WCDMA preferred, GSM/WCDMA/LTE auto
It includes sync optimization for battery saving.
I`ll post screenshots later today.
Lucky Rom V1 https://docs.google.com/file/d/0B0TLQ64WWs-DTHBRSlAyMGJwSjg/edit?pli=1
Patch http://www.fshare.vn/file/T8A9XX7CRT
E975h_europe_modem https://www.dropbox.com/s/rzpnlwu1lofpq2f/cwm-lgog_e975-europe-10h_modem.zip
1. http://prntscr.com/3t2y4w
2. http://prntscr.com/3t2y8u
3. http://prntscr.com/3t2ycu
4. http://prntscr.com/3t2yhi
5. http://prntscr.com/3t2ylc
6. http://prntscr.com/3t2yod
7. http://prntscr.com/3t2ys5
8. http://prntscr.com/3t2yw7
9. http://prntscr.com/3t2z2b
10.http://prntscr.com/3t2z7g
11.http://prntscr.com/3t2xh5
12.http://prntscr.com/3t2y06
Click to expand...
Click to collapse
F#CK YEAH gonna download this tonight and flash tomorrow
Sent from my iPad Mini (1st Gen) running iOS 7.1.1

Brontok said:
it doesnt have flashlight, you can install a 3rd party app.. i`ve posted several pictures , take a look.
Click to expand...
Click to collapse
I know that, but the first kitkat ROM and Paulicat have it and different dialler and sms UI too.
those releases from LG viet have different app that seems holder.
Sent from my LG-E975 using Tapatalk

Is the G3 UI included?the toggles at least...because a theme is easy to find

ioang said:
Is the G3 UI included?the toggles at least...because a theme is easy to find
Click to expand...
Click to collapse
u have pics on the first post.. it`s not included

Im on E97510i, do I have to downgrade to 10h first or can I just simply flash the baseband only after flashing the rom?

Brontok Mate,
I'm currently on v10F. Planning to flash 10H and then flash this. But if we want to revert back to 4.1.2, will we be able to do it with nandroid backup of v10H?. I will be taking nandroid backup immediately after flashing v10H, before flashing this ROM. Because, I see from several users that the signal is very weak in leaked kk ROM's.. Please advice...

Thanks for share @Brontok i had flashed lucky rom other day but did not find it much impressive so reverted back to Sling. Tell me did you find it any better ? It does not have Guest mode slide aside etc. I have a question whats the purpose of this patch ? i had flashed lucky without patch or modem and it worked fine.
---------- Post added at 12:17 PM ---------- Previous post was at 12:15 PM ----------
ioang said:
Is the G3 UI included?the toggles at least...because a theme is easy to find
Click to expand...
Click to collapse
VDT V 2.1 has G3 Toggles i havent tried it yet though . Downloading ATM.

howaboudno said:
Im on E97510i, do I have to downgrade to 10h first or can I just simply flash the baseband only after flashing the rom?
Click to expand...
Click to collapse
It would be better to downgrade and than flash this rom. if you try flashing the modem only please let us know if it worked.
cooljay5 said:
Brontok Mate,
I'm currently on v10F. Planning to flash 10H and then flash this. But if we want to revert back to 4.1.2, will we be able to do it with nandroid backup of v10H?. I will be taking nandroid backup immediately after flashing v10H, before flashing this ROM. Because, I see from several users that the signal is very weak in leaked kk ROM's.. Please advice...
Click to expand...
Click to collapse
You must flash KDZ jelly bean, do a hard reset, transfer your backup to your phone a than restore it .
Ahmed Xperia p said:
Thanks for share @Brontok i had flashed lucky rom other day but did not find it much impressive so reverted back to Sling. Tell me did you find it any better ? It does not have Guest mode slide aside etc. I have a question whats the purpose of this patch ? i had flashed lucky without patch or modem and it worked fine.
---------- Post added at 12:17 PM ---------- Previous post was at 12:15 PM ----------
VDT V 2.1 has G3 Toggles i havent tried it yet though . Downloading ATM.
Click to expand...
Click to collapse
Thank you for your feedback. Patch is there so that you may be able to enter recovery and boot your phone without getting stuck at secure booting error

Brontok said:
Thank you for your feedback. Patch is there so that you may be able to enter recovery and boot your phone without getting stuck at secure booting error
Click to expand...
Click to collapse
Thanks bro hope this patch does not lock the boot loader as it's title says?Locked boot loader means secure booting error
Edit: ok flashed it , it locked bootloader but boots in to CWM i can charge even device switched off

What about the 24h format for the clock? When rebooting, is it reset to am/pm format?

teacher77 said:
What about the 24h format for the clock? When rebooting, is it reset to am/pm format?
Click to expand...
Click to collapse
No

Ahmed Xperia p said:
Thanks for share @Brontok i had flashed lucky rom other day but did not find it much impressive so reverted back to Sling. Tell me did you find it any better ? It does not have Guest mode slide aside etc. I have a question whats the purpose of this patch ? i had flashed lucky without patch or modem and it worked fine.
Click to expand...
Click to collapse
It has slide aside, take a look at the settings.
The call forwarding btw doesn't work, is there any good app or a way to make it work?
Sent from my LG-E975 using XDA Premium 4 mobile app

[Q&A] ★[ROM][12 October] ★ Bulldog Note 4 Neo 1.0 ★ [4.4.2][N7505]★

[Q&A] ★[ROM][12 October] ★ Bulldog Note 4 Neo 1.0 ★ [4.4.2][N7505]★
Q&A for ★[ROM][12 October] ★ Bulldog Note 4 Neo 1.0 ★ [4.4.2][N7505]★
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:

oh yes since the time I finally dreamed !!!! I had a dream, now it will be fulfill !. Could you until we draw the features? Thank you sincerely!:good:

Thanks a lot buddy. If you need help, just ask!
(Italian) Complimenti per il tuo lavoro! Se ti servisse una mano per testare le build, non esitare!

Hi
My neo system status is offical DBT, knox warranty void:0. If file installed mein warranty is void? Google chrome blocked because file contains malware too.
thank you

ntt said:
Hi
My neo system status is offical DBT, knox warranty void:0. If file installed mein warranty is void? Google chrome blocked because file contains malware too.
thank you
Click to expand...
Click to collapse
If you install this rom, like any rom for that matter, will automatically switch to your knox 0x1.A this day, I do not think there is a way to not trigger it.
On Google Chrome, I think it's false positives.

Vamos a probarla
---------- Post added at 12:05 PM ---------- Previous post was at 12:01 PM ----------
We will try this rom

Hi
Can You provide me odin version, because I can not install Rom, Neo rooted, I have flashed Root and Super Su knox was disabled
footer is wrong
signature verification failed.
My FW DBT 4.4.2
Thanks

Polish >?
Polish leuage ?

note 3 neo sm-n7505
Hi sr how to flash this rom ? Odin or cwm ? Thanks ..

arrow2330 said:
Hi sr how to flash this rom ? Odin or cwm ? Thanks ..
Click to expand...
Click to collapse
Hello, in the order you have to be root and have installed TWRP(or CWM) .Once these steps done!:
1) Copy / paste the zip to the root of your sd card file.
2) Turn off your mobile.
3) Hold down the Volume Up + Home + Power button to reboot into recovery.
4) Start by making a backup of your current ROM by selecting Backup & Restore then Backup.
5) Select Wipe data / factory reset and confirm Yes.
6 °) Select Wipe cache partition and confirm Yes.
7 °) Select Advanced Wipe Dalvik cache and then confirm Yes.
8 °) Then select install zip from sdcard in Recovery menu.
9 °) Then select Choose zip from sdcard.
10) Finally, select the zip file and press Yes.
11) Finally, select Reboot System Now when finished
12 °) Your mobile will restart. Be patient at the first reboot.

and the air view with the finger?

links do not work for CWM Recovery 6.0.5.1 does not start recovery Soft 4.4.2 Please

9181117 said:
links do not work for CWM Recovery 6.0.5.1 does not start recovery Soft 4.4.2 Please
Click to expand...
Click to collapse
You should try with TWRP 2.8.0.0!

just use and still does not start

9181117 said:
just use and still does not start
Click to expand...
Click to collapse
What is the problem exactly? Are you able to install the ROM via your recovery ?.
If so, be patient in this reboot may take a few minutes for the first boot.
---------- Post added at 01:31 PM ---------- Previous post was at 01:26 PM ----------
Also, I suggest you try to reinstall as I have already mentioned before:
1) Copy / paste the zip to the root of your sd card file.
2) Turn off your mobile.
3) Hold down the Volume Up + Home + Power button to reboot into recovery.
4) Start by making a backup of your current ROM by selecting Backup & Restore then Backup.
5) Select Wipe data / factory reset and confirm Yes.
6 °) Select Wipe cache partition and confirm Yes.
7 °) Select Advanced Wipe Dalvik cache and then confirm Yes.
8 °) Then select install zip from sdcard in Recovery menu.
9 °) Then select Choose zip from sdcard.
10) Finally, select the zip file and press Yes.
11) Finally, select Reboot System Now when finished
12 °) Your mobile will restart. Be patient at the first reboot.
Follow these steps well, they are crucial for proper installation !.

Sorry~I have a question
This ROM can be used on the N7507?
Two model specifications are the same!
re Just in Modem and LTE band~~

216
nhpss930094 said:
This ROM can be used on the N7507?
Two model specifications are the same!
re Just in Modem and LTE band~~
Click to expand...
Click to collapse
I think so, at first glance, but I do not want to risk bringing you a brick.Maybe others can confirm or not.
---------- Post added at 02:07 PM ---------- Previous post was at 02:02 PM ----------
I think the only concern is that the bands are not the same networks with Europe.

Issues with Widgets
Hi,
I have a little issues with widgets but only when I use a other launcher like Nova or Aviate.
Everything else works like a charm, even the wifi now (thanks to the fix) but when I try to add a widget, I've got an error who say "Unfortunately, Settings has stopped" with Nova or Aviate. At the beginning I tought it was my Kazakstan ROM but then I flash my Note with the Italian ROM and I've got the same problem on both.
So.. Is there a possibility to fix that ?
Thanks for your answer . And nice work by the way !

what about the s-pen and the camera?
weeks before i tried different s5 roms for my i9300. The camera doesn't work on all s5 roms for the i9300
is it the same here for the n7505? does the camera work?
sorry fo my bad english

The camera and the s-pen work well with this ROM. Don't worry about this..
Sent from my SM-N910C using XDA Free mobile app

Flashing Lollipop Roms (XPERIA S)

You Must have UNLOCKED your BOOTLOADER FIRST To Upgrade.​STEP 1
Root your mobile.I have tested Kingo root software(PC) and rooted successfully
STEP 2
Before unlocking BootLoadr , Take TA partition backup. Search on Google what is TA partition how to backup or Go here.
STEP 3
Install recovery (If already installed then move to Step 4) .
STEP 4
Now you need a compatible recovery to flash lollipop rom.Download Flashable zip with TWRP .
This has mickybarts Naosp b26's boot.img(Kernel) and Twrp recovery which can flash Lollipop roms without any problem.
FLASHING LOLLIPOP ROM
Download the ROM and gapps use pico gapps as its small in size.Download Supersu.zip.then copy these to SD card.
Now you have 4 FILES must be copied to SD card.you can make a folder and place all files on that.
1. flashable Zip with twrp
2. ROM.zip
3.gapps
4.SuperSU.zip.
Now the flashing steps.
1. Enter to recovery (cwm) and take back up(important).
2. now install the flashable Zip with twrp and reboot to recovery.
3. now you are on twrp recovery
Then in TWRP goto Wipe----then choose Advance wipe---then select (4 things) 1.Dalvik cache,2.System,3.cache,4.Data and swipe to wipe (Important::Make sure Sd card is not selected....Otherwise you will lose all saved files in sd card).
4. Now go back to main menu of TWRP and Goto Mount menu...and Deselect (3 things) 1.System, 2.Cache, 3.Data..(Leave the Internal Sdcard selected or ticked)
5. Now go back to Main menu and click Install. Then Select the Rom.Zip you want to Flash.
6. Wipe Cache Dalvik Cache
7. Now again Goto Install menu and Select Gapps package to Flash
8. Wipe Cache Dalvik Cache
9. Select Supersu.zip to Flash
10. Wipe Cache Dalvik Cache and Reboot to system.. DONE

Tried your flashing tutorial and it woked so well, didn't faced any bootloop problems and the steps are clear enough for newbie like me. Great job bro! It would help a lot of people mostly the first timers in flashing custom roms... Keep it up!

7thSealv2 said:
Tried your flashing tutorial and it woked so well, didn't faced any bootloop problems and the steps are clear enough for newbie like me. Great job bro! It would help a lot of people mostly the first timers in flashing custom roms... Keep it up!
Click to expand...
Click to collapse
Thank you for your valuable comments..

tried ur flashing tutorial and it worked but mi internal storage is with 1.96GB when i tried to take a photo it says insert sd card

alusan20raziel said:
tried ur flashing tutorial and it worked but mi internal storage is with 1.96GB when i tried to take a photo it says insert sd card
Click to expand...
Click to collapse
Flash naosp ROM b28 or lower versions.above b 28 or naosp 6.0 need repartitioning.

nageswarswain said:
Flash naosp ROM b28 or lower versions.above b 28 or naosp 6.0 need repartitioning.
Click to expand...
Click to collapse
him thanks for reply i actually reinstall stock then i followed procedure to install lollipop rom, im actually install this nAOSProm-5.1-b28.zip same steps and im still with no internal storage
---------- Post added at 07:28 AM ---------- Previous post was at 07:27 AM ----------
nageswarswain said:
Flash naosp ROM b28 or lower versions.above b 28 or naosp 6.0 need repartitioning.
Click to expand...
Click to collapse
hi, thanks for reply i actually reinstall stock then i followed procedure to install lollipop rom, im actually install this nAOSProm-5.1-b28.zip same steps and im still with no internal storage

alusan20raziel said:
him thanks for reply i actually reinstall stock then i followed procedure to install lollipop rom, im actually install this nAOSProm-5.1-b28.zip same steps and im still with no internal storage
---------- Post added at 07:28 AM ---------- Previous post was at 07:27 AM ----------
hi, thanks for reply i actually reinstall stock then i followed procedure to install lollipop rom, im actually install this nAOSProm-5.1-b28.zip same steps and im still with no internal storage
Click to expand...
Click to collapse
Try b26.I tried it with the same procedure and it was working for me.but b 28 should be working.anyway try b26

cant find b26 download link. help me please

alusan20raziel said:
cant find b26 download link. help me please
Click to expand...
Click to collapse
May b that file is being deleted.which version of b28 you tried?

nAOSProm-5.1-b28.zip

alusan20raziel said:
nAOSProm-5.1-b28.zip
Click to expand...
Click to collapse
Try the other one or ask mickybart which version requires no data merge