Hi, I have wildfire S. Got it rooted and i was using custom ROMS on it for sometime, Then i wanted to extend the internal space and tried partitioning and used CronMod-INT2EXT4+_signed . It worked well, Then the decline started to begin, I tried to install a custom rom, had status 7 error, tried to fix it and had status 0 error, then had status 6 error, i tried to reinstall recovery, was using cwm 5.0 , anyway when i tried to flash recovery phone won't start after that, it goes in fast bot, show the recovery option but when i try to get in recovery it get stuck on htc logo. Now i don't know how to flash anyother recovery on phone, What can i do using my pc? Any help in this regard will be appreciated. Thanks
-------------------------
Well now i can't go into botloader as well. I guess battery is down, I am trying to charge it but its not charging. Anyway to charge battery?
---------------------------------------------------
Problem Solved,
Thanks for replies, Ok here is what i did, I bought a charger that charges the battery only so i got the phone charged. I noticed everytime i go in fastboot and press volume down it does find some files. File name PG something. i checked my wfs folder, i have PG76IMG.ZIP. It was from the time i rooted the phone. I put that file in sd card. Went into fast boot. When phone searched for file it did find the file and installed cwm recovery 5.0. something version. Tada. Problem solved. This recovery don'yt give any error 7. or error 0 or any other error, I installed a rom, created partiations and now the phoen have load of space and its running really good. Thanks for help everyone. Am attching file incase someone need it in future. Cheers.
Buy a new battery and then boot into bootloader. You can flash recovery in fastboot mode.
Gesendet von meinem Nexus 7 mit Tapatalk 4 Beta
If you're able to get a 3.5 v source, connect the wires to the battery for 10 min, without letting it become too hot.
You can still boot your phone into fastboot mode. When you're there (I suppose you already have adb and HTC drivers installed, I f not look for them here on xda) type
fastboot flash recovery XXX.img
with XXX.img the img file of the recovery you want to flash. (look for it on xda as well).
Then wipe all partitions and start from scratch.
Hope I helped, hit thanks if so
Sent from my Desire S using xda app-developers app
Solved.
Thanks for replies, Ok here is what i did, I bought a charger that charges the battery only so i got the phone charged. I noticed everytime i go in fastboot and press volume down it does find some files. File name PG something. i checked my wfs folder, i have PG76IMG.ZIP. It was from the time i rooted the phone. I put that file in sd card. Went into fast boot. When phone searched for file it did find the file and installed cwm recovery 5.0. something version. Tada. Problem solved. This recovery don'yt give any error 7. or error 0 or any other error, I installed a rom, created partiations and now the phoen have load of space and its running really good. Thanks for help everyone. Am attching file incase someone need it in future. Cheers.
Related
PLease know, I have searched and tried all that I could but my EVO is dead..(well on the way to dead anyway...)
If anyone can help it would be greatly appreciated.
I was running FreshRom 3.2.0.0 With great success. Fully Rooted. I flashed a zip to change the lockscreen and now here's where I am...
Phone will boot to HBOOT. Phone will connect to USB with Fastboot (at least I believe it will as the command "Fastboot reboot" reboots the phone from ADB).
Recovery will NOT see my SDCARD. The fixes for this (how I learned about fastboot) do not change this fact.
Regular reboot of the phone gives me the white screen EVO logo and then moves to a blank screen with the backlighting on and nothing. That's about where it's at.....
Is there anything I can do?
Try plugging your phone up to your computer and try to access your phone to the command prompt using adb just like when you first rooted it or run the unrevoked 3 file again while connected to your computer....I think that's what I did when I had something similar to your problem...
Sent from my PC36100 using XDA App
This happened to me as well. I fixed it by:
1) Flash back to 2.1 http://shipped-roms.com/shipped/Supersonic/ (select the May date for the rom).
2) Root again, using unrevoked
3) Flash Fresh 3.2 rom again, using Rom Manager
joeldanganan said:
This happened to me as well. I fixed it by:
1) Flash back to 2.1 http://shipped-roms.com/shipped/Supersonic/ (select the May date for the rom).
2) Root again, using unrevoked
3) Flash Fresh 3.2 rom again, using Rom Manager
Click to expand...
Click to collapse
___________________-
I thought this might be a good idea, so I have been trying to do this, but for some reason, no matter which rom I choose from here, It downloads a comparativly small amount (like 17 mb for a 175 mb file) and says it's finished. I run the exe, and I get error messages specifically Error -5001
But I do appreciate the input from both of you.
PaydayJones said:
___________________-
I thought this might be a good idea, so I have been trying to do this, but for some reason, no matter which rom I choose from here, It downloads a comparativly small amount (like 17 mb for a 175 mb file) and says it's finished. I run the exe, and I get error messages specifically Error -5001
But I do appreciate the input from both of you.
Click to expand...
Click to collapse
maybe try a different browser.
PaydayJones said:
PLease know, I have searched and tried all that I could but my EVO is dead..(well on the way to dead anyway...)
If anyone can help it would be greatly appreciated.
I was running FreshRom 3.2.0.0 With great success. Fully Rooted. I flashed a zip to change the lockscreen and now here's where I am...
Phone will boot to HBOOT. Phone will connect to USB with Fastboot (at least I believe it will as the command "Fastboot reboot" reboots the phone from ADB).
Recovery will NOT see my SDCARD. The fixes for this (how I learned about fastboot) do not change this fact.
Regular reboot of the phone gives me the white screen EVO logo and then moves to a blank screen with the backlighting on and nothing. That's about where it's at.....
Is there anything I can do?
Click to expand...
Click to collapse
if your computer isnt downloading the full file, are you sure it downloaded the full 3.2 rom when you first started?
can you do a nand restore?
Try uninstalling the lock screen you put on through adb....
Thank you to everyone who pitched in here. I managed to get a copy of the stock RUU this morning. Flashed it just fine and now I am rooted with the three click method. All is well.
Thanks again!
Dear Xda's
I Have An DHD, i tried for te first time to Flash/Root/S-OFF/HBOOT and changing ROM. it went not good
Yesterday i have flashed new rom, as it said on multiple thread in here, but today i dared to change kernel on my phone (i like car tuning, so i tryed tuning my phone
But now, i came to the point of no return(for me). My phone will only show HTC logo on the white backround, thats it, no bootloader, no recovery noting... I ave
read every thread abour Rom/Root/S-Off, Eng S-OFF, i'm sure every thing. I can only turn the phone, by taking the battery off... I have formated my SD card, because of i thought that i ave used CMW partition, before the fix...
And now i will be glad with a stock Rom, Kernel a.s.o...
Please help me, some one... i really don't know what to do...
I so sure that i have read twise before starting to change stuff on my phone.
I had HTC HD2 before, and taht was much easier to flash...
Anis2002 said:
Dear Xda's
I Have An DHD, i tried for te first time to Flash/Root/S-OFF/HBOOT and changing ROM. it went not good
Yesterday i have flashed new rom, as it said on multiple thread in here, but today i dared to change kernel on my phone (i like car tuning, so i tryed tuning my phone
But now, i came to the point of no return(for me). My phone will only show HTC logo on the white backround, thats it, no bootloader, no recovery noting... I ave
read every thread abour Rom/Root/S-Off, Eng S-OFF, i'm sure every thing. I can only turn the phone, by taking the battery off... I have formated my SD card, because of i thought that i ave used CMW partition, before the fix...
And now i will be glad with a stock Rom, Kernel a.s.o...
Please help me, some one... i really don't know what to do...
I so sure that i have read twise before starting to change stuff on my phone.
I had HTC HD2 before, and taht was much easier to flash...
Click to expand...
Click to collapse
download full wipe from xda.. google it "full wipe 1.3 xda" put the zip in ur sdcard.. put the rom(watever rom ur using) in sdcard as well ..
now take battery off ur phone.. back in.. press and hold vol down + power key.. u will go into bootloader.. then click on recovery.. ur phone will boot into CMW recovery > install zip fro sdcard.. 1st do a full wipe.. then flash the rom again.. u will be fine
i'll try now, so happy some one can help, i havent sleept for hours
Else if that does not work ( when i try to boot into recovery that way my phone vibrates, shows a green light and does nothing.. )
connect the phone to your computer and in ADB type: " reboot recovery "
I agree with leather face, I haven't tried this method but I have heard this will solve your problem, when I had the same sort of problem I downloaded the ace stock rom the placed the file on my SD card then took my battery out then reinserted it & powered back on while holding down the volume down button then once in bootloader select fastboot then it will ask to load zip, select yes now it will say done, reboot then you should be back at the beginning again with a working phone start again from scratch but this time do a wipe from recovery and make sure you are using the correct clockwork with the correct rom ie clockwork 2.*.*.* with Cyanogen 6 & clockwork 3.*.*.* with Cyanogen 7 & then you should be just fine mate
now i've tried... it says it cant find recovery file? in CWM loader
it says wrong image...
edit: signature is wrong (or some thing like that) should i rename the .zip file?
or sould i generate a Goldcard for MD98IMG.zip?
Anis2002 said:
or sould i generate a Goldcard for MD98IMG.zip?
Click to expand...
Click to collapse
You'll only need a goldcard if your phone is branded.
With something like a T-Mobile Bootscreen or else.
The Filename should be PD98IMG.zip and it should be in the root folder of your SD.
i think i need to change my system recovery? right? please somewone confirm, if you know... i miss many calls, and dont have any back up phone
Anis2002 said:
i think i need to change my system recovery? right? please somewone confirm, if you know... i miss many calls, and dont have any back up phone
Click to expand...
Click to collapse
does anybody know how to flash CWM, not with ROM manager?
i hope some one will help...
Anis2002 said:
does anybody know how to flash CWM, not with ROM manager?
i hope some one will help...
Click to expand...
Click to collapse
Dude,DON'T PANIC!
Download the attached CWM 2.5.1.3 rar and unrar it.
Now,do you have ADB setup on your pc?If not,search for a guide(Google is your friend),there are many.Supposing you have ADB setup,place the downloaded CWM .img file inside the folder where fastboot is.Open CMD in windows(Type cmd in RUN on your start menu) and there type "cd" and navigate to the folder where fastboot is,like "cd C:/YourPc'sName/android/tools" without the quotes.If it changes folder(it will if you type everything correctly) type without the quotes "fastboot flash recovery recovery-clockwork-2.5.1.3-ace.img".The you will be able to boot in recovery through fastboot.
Else,you can use Fastboot commander which is supposed to have a nice GUI and make things easier,but I haven't used it.
Hope I helped!
FIXED,
Fith Fastboot commander (putting my phone in FASTBOOT USB)
Flashing CWM tool, after that I'm da king (Thanks to all, specially mimilover)
Installed Rom, kernel and now nunning 1300Mghz trying it out...
Hey everyone. I know there are already a few threads with boot loop animations, and am having difficulties finding the same situation as what I'm going through. Here is what the phone used to have before it randomly started looping:
Rooted - with Stock rom, using ClockwordMod Recovery 5.5.0.2
Used Go Launcher Theme ( if that even matters )
No additional roms installed or anything, the phone is 3 months old.
Ok here is where I'm stuck. I understand I should reflash somethings like recovery image or something, but I'm stuck with one big problem. My computer and phone don't recognize using the USB mount.
The message I get is called "Unable to open lunfile ( no such file or directory)
Here's what screens I can get to:
1. Hold vol up/down while holding power ( the little android with its belly open, and the options Start - Restart Bootloader - Recovery mode - Power Off )
2. Hold vol down - ODIN mode, with the START option only
I can access WMD recovery and factory reset, Try to install my old backup, nothing works at all in that area, no matter what I do.
Can someone advise me a step by step way of getting my computer to recognize my phone, so that I am able to do fastboot, or reflash, or anything to get my phone working again. I can't access my internal memory at all.
It's even possible that I've read too much, and my frustration is getting in the way, if so I apologize! Some guidance would be greatly appreciated!
Thanks in advance of course! I need my phone for business!
Cheers,
Install the drivers on a computer then use fastboot oem unlock. Or just factory reset it from within recovery.
Sent from my Galaxy Nexus using Tapatalk 2 Beta-4
Try my siggy.
I'm not sure about the exact error:
But the link there will get you the correct drivers.
Also, as stated...try to factory reset.
You'll lose your apps/data that way though =/
Hopefully you can get the driver installed and get your computer to recognize.
If so, follow this to back up your apps:
http://forum.xda-developers.com/showthread.php?t=1420351
Have exactly the same setup as you (rooted/stock/CWM) and had the animation bootloop - animation would just loop until a battery pull.
Only thing that solved it was a factory reset from recovery. Been working fine for the 4 weeks since. No need for any reflashing etc. Titanium recoveries have all worked fine as well. Didn't try my Nandroid backup as I thought that may still have the 'fault' built in.
I had a boot loop for every from I tried to flash...wat fixed it was before flashing u need to wipe system data and wipe the cache in the recovery...ie a clean install...then every rom I tried worked...so I think ur missing that crucial step coz it worked for me
Sent from my Galaxy Nexus using Tapatalk
Hey guys, as stated above I've done numerous factory resets, it still seems to boot. I will for sure try to get the drivers installed so my phone is recongised by the computer, but would need step-by-step assistance when doing fastboot, or whatever the next step is.
Looking for more help though! Keep em coming!
?
Any other ideas?
Thanks!
Ok guys, so here's where I'm at now. I've used Jubakuba's sticky link, located here:
http://forum.xda-developers.com/showthread.php?t=1529058
Everything is able to be recognized up to the point where it says "Put the su.zip on your phone."
Since I cannot access my phone contents, since I keep getting this "Unable to open lunfile ( no such file or directory), it does not allow me to add anything to my phone.
I re-installed CWD as stated in the list of things to do, and all that went well. But I have the same issue, I tried factory resetting all that. erase cache, and still stuck with the same issue.
What's my next step now peeps? Looking for a quick answer as I have time to do it tonight!
Edit***
Just tried this trick: but it says it does not recognize the device?? what is going on! Please help someone! Thanks!
Panic Section! (Something is Wrong)
Q: My phone won't boot!
A: The easiest option is to get into recovery and restore a nandroid using the above guide (pull battery to put phone in an off-state if needed).
However, more advanced options are available if you don't have a nandroid available (You're naughty).
Do you have another rom .zip available on your SD card? If so, simply use the above guide for installing a rom to get you booting again.
If not, you can download one on your PC. Boot into fastboot (the green Android with open chest menu).
Move the .zip to the C:\android-sdk-windows\platform-tools folder.
Open ADB.
Change the NAMEOFZIP.zip below to the correct file name...and perform the action.
Surely your computer recognizes your phone. Otherwise how were you able to unlock the bootloader and flash the recovery?
And I've never seen that error message before. It doesn't even make any sense to me. Where are you seeing it? On your phone or on your computer? And in what context? What are you trying to do when it shows up?
If your phone isn't booting I'm not sure that you can copy any files to it yet. (Maybe you can use adb in clockworkmod? I'm not sure) What I do know you can do is flash the stock ROM and start over.
Download the image from Google here:
http://code.google.com/android/nexus/images.html
Here's a instructions for the GSM version:
http://forum.xda-developers.com/showthread.php?t=1366806
For the Verizon version, I can't find the thread at the moment but you just replace the filenames and also there's 2 radios to flash so:
fastboot flash radio *filename*
fastboot reboot-bootloader
fastboot flash radio-cmda *filename*
"Unable to open lunfile ( no such file or directory) appears on the phone, in CWD mode, when trying to attempt "mount Usb" to be able to access my internal storage .
I am attempting your thoughts right now.
I will post with results
Ok I tried to do this step. This is the outcome I received on the computer after even typing the first step:
'fastboot-windows' is not recognized as aninternal or external command, operable program or batch file.
A thing to stress, I'm not sure how to do step 1: 1) Take a Nandroid Backup if you have CWM installed.
EDIT***
GREAT NEWS!
used this setup!
http://android.modaco.com/topic/348161-01-feb-r4-superboot-rooting-the-gsm-lte-galaxy-nexus/
and it worked!
Thank you everyone! Going to play with my phone and make sure it all works!
Macinshak said:
Ok here is where I'm stuck. I understand I should reflash somethings like recovery image or something, but I'm stuck with one big problem. My computer and phone don't recognize using the USB mount.
The message I get is called "Unable to open lunfile ( no such file or directory)
Click to expand...
Click to collapse
the problem is when that happen?? when ur phone is booted and u plug the usb cable to ur pc? or when u are under recovery and want mount the usb mass storage? the second one doesn't work
Dear XDA-members,
This afternoon, I tried to root mij HTC One X and flash it to Cyanogenmod 10.2. During the flashing, I made the mistake to forget to put the boot.img and Google Apps files on my SD card. During the rom installation, I got stuck in the splash screen. For this reason, I formatted my SD kaart in the CWM recoveryscreen but now my phone doesn't have any rom at all. When I turn on my phone, I only get to see the white HTC screen. When I try to connect my phone to my pc, it doesn't get recognized. I just want to get my stock ROM back again to get my phone working. I do have acces to the CWM recoveryscreen.
I downloaded the fastboot and RUU files, but fastboot won't recognize my device through the commandscreen. This is why I can't put the RUU files on my phone.
Can someone please help me? I don't have a clue what to try next to save my phone.
Thanks in advance!
kajvb said:
Dear XDA-members,
This afternoon, I tried to root mij HTC One X and flash it to Cyanogenmod 10.2. During the flashing, I made the mistake to forget to put the boot.img and Google Apps files on my SD card. During the rom installation, I got stuck in the splash screen. For this reason, I formatted my SD kaart in the CWM recoveryscreen but now my phone doesn't have any rom at all. When I turn on my phone, I only get to see the white HTC screen. When I try to connect my phone to my pc, it doesn't get recognized. I just want to get my stock ROM back again to get my phone working. I do have acces to the CWM recoveryscreen.
I downloaded the fastboot and RUU files, but fastboot won't recognize my device through the commandscreen. This is why I can't put the RUU files on my phone.
Can someone please help me? I don't have a clue what to try next to save my phone.
Thanks in advance!
Click to expand...
Click to collapse
Can you mount storage in recovery ? If you can....
Mount storage in recovery and copy/paste rom and kernel on SD, flash rom and kernel, than flash boot.img via fastboot.
Can u do any fastboot commands while phone is on bootloader?
Sent from my HTC One X
Thanks for the quick responses!
Unfortunately, I can't mount storage in recovery so I can't acces my SD card.
I can, however, access the fastboot menu so it's possible to do fastboot commands and get into the CWM menu.
https://www.dropbox.com/s/yqzlpqo8illa53j/Philz recovery 5.15.9.img
Flash this recovery and you can mount the sd
Thanks, but can you explain how to do that?
I don't think I can use fastboot because my phone doesn't get recognized, but maybe I'm doing something wrong.
OK, I found a way to do that via fastboot, but I couldn't mount it just like in CWM. I did download a RUU.exe because I figured that fastboot is working for me! So I tried to install the stock ROM using the RUU.exe and fastboot, but the flashing progress was aborted because apparantly that RUU version was older than the one on my phone. I googled for a newer one, but there are no newer .exe files and according to others I should use a nandroid backup zip file.
How should I do that? Or is there any way that I can make the RUU.exe I downloaded work, because it seemed to me that the program worked fine except for the older version part. Or is it the easiest to flash Cyanogenmod, I've got those files on my pc as well. I wouldn't know how to do that, just by flashing boot.img from the zip file? I really hope you can help me out!
Further notes: during the RUU installation progress, CWM and Philz were wiped from the SD card and I had to relock my phone. I don't know if any of that should cause a problem though.
Flash that philz, enter recovery. Put in the usb cable and mount. Wait until the sdcard pops up on windows. Can take minutes......but works for sure !
Thank you, I'll try that tonight! Then, what kind of files should I copy on the SD card? And can I use the Cyanogenmod files as well as the stock ones? Lastly, do I need to unlock my phone again?
Unlock, flash recovery, flash boot.img, make a full wipe, install CM, install GAPPS ..... reboot
OK, so just to get it straight:
First I unlock it, then flash philz via fastboot. Then enter recovery mode and mount USB. After that, I copy the Cyanogenmod boot.img and the GApps file on the SD card. Lastly, I install the boot.img file via the Philz recovery program and then the GApps, and I reboot.
Is this right or should I do something different?
Thank you so much!
Cm.zip to sdcard, boot.img flash via fastboot. Install CM.zip and gapps via recovery.
Two last questions:
Which boot.img file do I need to use? The one from the CM.zip?
And how should I do the full wipe?
Also, I can not flash my phone because it won't charge properly... When I connect it to the charger, it will charge and I see the red light. After a while, the battery drains and gets empty, while still seeing the red light. I put it on the charger all night and it was totally empty when I checked this morning. Do you have an idea how I can deal with this?
If you can get into philz recovery. Leave it there. The battery charges inside of it.
And yes always boot.img of the rom.zip you want to install.
Sent from my HTC One X using XDA Premium 4 mobile app
I can not flash Philz yet because the bootloader is still locked. It has charged enough now, but when I try to unlock it by typing 'fastboot flash unlock unlock_code.bin' it says:
Sending 'unlock' (0 KB)... OKAY [0.009]
Writing 'unlock' ... FAILED (remote: not allowed)
finished. Total time: 0.219s
Could it be that I need to get a new unlock_code.bin? Now I use the same one as when I first tried to lock it. Or do I need to type another command for reunlocking? The status on my phone still says relocked...
Command is not correct
Fastboot flash unlocktoken unlock_code.bin
Sent from my HTC One X using XDA Premium 4 mobile app
Thank you so much, it worked!
CM10.2 is installed, I've got only one more problem...
When I boot it, and pass the setup wizard, the phone keeps popping up the same message:
Unfortunately, Setup Wizard has stopped. Every second it pops up.
I can acces various programs, so that works, except for that message.
Do you happen to know a solution for that as well?
Anyway, thank you again for your help!
Installed gapps ? The correct one ? Made a proper full wipe full before installing the rom !
Sent from my HTC One X using XDA Premium 4 mobile app
Yes, I got it to work. Now I've got a new problem... For one afternoon, my phone worked perfectly, but since that evening, now two days ago, I can't connect with my mobile services. I can't call, go on internet (only via WiFi), and when I try to create a new APN, it doesn't show. I tried it with two different SIM cards, neither work. Also my battery drains very fast and when I take a look at my battery app it doesn't show Google play services from which I heard is a common cause
Sent from my EndeavorU using xda app-developers app
okay so heres what happened.
I have an international htc one x that is indeed rooted with no roms installed.
I did create a back up and then tried to install the MIUI rom (but I dont really know where that is on my phone. I know I made one with rom manager. I dont have any backups on my computer though)
It worked, however, it didnt have wifi or data signals so i went back to try again.
I opened my bootloader screen. For the record, it is unlocked and hboot is version 1.73 if that helps.
I wiped cashe/data/delvic everything and even factory reset and installed the MIUI RD rom now hoping it would have a difference.
The darn thing got stuck on the MIUI bootloader for hours.
I did the same thing again a few times, sometimes in different orders and then it passed on and another screen came saying 'starting apps'. That got stuck for hours too.
Now I don't have any other roms on my phone, just the MIUI RD. The original miui just vanished too, i dont see it anymore. Also, when I put my USB wire to the phone and connect it to the pc, I cant transfer newer files into it. So this is all I have access to on my phone apparently.
I tried flashing a boot.img and a couple kernels but no luck. I've been trying to do this for all day and this is my first time so I don't know much about it.
I've been googling and somethings say to open cmd and type but i keep getting 'fastboot is not recognized as an internal or external command'
Currently, its not stuck at either the MIUI screen or the Starting Apps. but just the HTC logo screen and not going past.
I don't really want to install any new roms considering i've worked really hard to get this to work and I really want it now more so.
How do i fix this? I want to use this rom.
flash philz recovery (http://forum.xda-developers.com/showthread.php?t=2240646), usb mounting should work on that, then:
steps to install ROM
1. bootloader version should be 1.3x
2. copy ROM to SD Card
3. copy boot.img INCLUDED in the ROM zip to fastboot folder
4. flash the boot.img in fastboot
5. in recovery, wipe system/data/cache/everything
6. flash rom
7. restart
but how exactly do i put it on my phone? my computer isnt detecting my phone when i connect it? im sorry im not exactly an expert on this.
Go to recovery - mounts and storage - hook up the usb cable - tap the last option in the mounts and storage list and wait a few minutes. It won't be mounted instantly
ok i flashed the philtz recovery but when i flash the boot.img it says:
Finding update package
Opening update package
Installing update
installation aborted
for reference: http://forum.xda-developers.com/showthread.php?t=1957490
thats the rom i used and i flashed the boot.img flasher thats right above the download link
edit: also i tried just flashing the rom again and im still stuck on the HTC screen.
its not even going to the miui screen or starting apps anymore. :[
Boot.img must be flashed via fastboot. Not via recovery !
ok, i looked up how to fastboot, downloaded sdk files and i moved the boot.img into the fastboot folder and i opened command prompt there and wrote fastboot flash boot boot.img but i keep getting:
'fastboot is not recognized as an internal or external command'
what did i miss?
EDIT: ok, so the fastboot folder i got from the page didnt work so i used a different fastboot folder, dragged the .boot there and now it worked! finally passed the screen and wifi is connecting!
thank you!
Good, thanks to @tomascus. He summed it up real nice
Cheers