Dear Friends ,
I have purchased a new HTC TYTN II unit and i have checked the HTC website and found that there is some ROM upgrade avialable(RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.32R2_Ship
So i have downloaded that and tried to install it on my device. The installation was cool , it covered 100 % ,but at the end there was a error message on my PC " Error 270 -update error -image file corrupted " and my device continuously shows " KAIS130, SPL-1.93.0000,CPLD-8 " and there is 4 colour bars on the device.
I have tried the reinstallation - but no use , tried soft/hard reset - no use .
So kindly help me to solve the issue.
Regards,
Jerry
E Mail : [email protected]
Hello
I have a problem with the DarkyRom Tool app on me Galaxy S, I installed it from the Android Market succesfully but. When I try to start the app it says
"Runtime error
Location: [20,0] file:///android_asset(Resources/function.js
Message: TypeError: Cannot read property "nattivepath" from null (file///android_asset/Resources/functions.js#20"
Someone have any good idea or something what it can be ?
MvH Atyne
www.darkyrom.com
There you can live chat with devs if you are registered.
Redownload it make sure its the one made by ficeto
Does anyone still have the 1.0 apk?
I upgraded to 1.1 now it will not find my sprint modem and problems here and there.
Here you go..... [removed]
taqulic said:
Here you go..... http://db.tt/jnAqmyXk
Click to expand...
Click to collapse
Thank you so much, to bad I can only give you one thanks :laugh: , now everything is working again. I dont know what the dev changed on the update but something did dealing with the sprint modem..etc. and it all went down hill.
Seems like someone else had that problem too.... thought I read it in the reviews..
taulic,
please be so kind and remove the public access to the APK file.
The original package is fixed now.
Note that the program itself is free of cost but not free to copy. If people run into trouble I will provide older versions when asked.
Regards,
Author of PPP Widget
JFDee said:
taulic,
please be so kind and remove the public access to the APK file.
The original package is fixed now.
Note that the program itself is free of cost but not free to copy. If people run into trouble I will provide older versions when asked.
Regards,
Author of PPP Widget
Click to expand...
Click to collapse
Done.
PPP works once, then ned to re-installed
taqulic said:
Done.
Click to expand...
Click to collapse
Hi There,
The app works fine when I install it first, my dongle i being recognized no problem. However if I disconnect, and unplug the dongle and try to connect again, the widget shows "no modem found".
I have tried forcing the app to stop, uninstall stickmount as I thought there was clash between both apps and still it doesn't work. the only work around I v found is to re-install the app, which is not very convenient when on the go and needing internet in the first place to be able to access it.
Would you be willing to provide me the APK installer as I am quite happy to install the app whenever I need it, or maybe suggest a workaround?
you have done a fantastic job by the way
G
file is no longer available
Will you please re-upload the file (PPP wedget 1.00 APK) in drop box since the hyperlink says (The file you are looking for has been deleted or moved). Thank you very much
You should first, email the author of the app and see if he can help you with your problem.
I'm not sure I still have the app in backup... as I only save them for so long. (But I'll check).
For those people having problems with this app, there is a forum and active discussion
Here, click forum link at bottom of page.
http://www.draisberghof.de/android/pppwidget.html
Will you please email this file; thanks
Unknown Zone said:
Thank you so much, to bad I can only give you one thanks :laugh: , now everything is working again. I dont know what the dev changed on the update but something did dealing with the sprint modem..etc. and it all went down hill.
Click to expand...
Click to collapse
Dear "Unkown Zone", will you please email this file (PPP Widget 1.00); thanks
Please email link
Unknown Zone said:
Does anyone still have the 1.0 apk?
I upgraded to 1.1 now it will not find my sprint modem and problems here and there.
Click to expand...
Click to collapse
If you have older version of PPP Widget 1.00 (apk file), please post a link. I have tried many changer.bat options since your last post; both uberoid v11 and 12.1. Nothing seems to work so far to make the ZTE-MF190 work again since upgrade from stock ROM. Tried 2 look for this file however no success. Thank you.
Deleted.
samsung note i717 no drivers found
PPP Widget version 1.3.3
USB_ModeSwitch log from Tue Sep 24 21:36:19 IST 2013
Raw args from udev: 1-1/1-1:1.0
Using top device dir /sys/bus/usb/devices/1-1
----------------
USB values from sysfs:
manufacturer ZTE, Incorporated
product USB Storage
serial 000000000002
----------------
bNumConfigurations is 1 - don't check for active configuration
SCSI attributes not needed, moving on
checking config: /data/data/de.draisberghof.pppwidget/app_tmp/19d2.fff5
! matched. Reading config data
devList 1:
config: TargetVendor set to 19d2
config: TargetProductList set to fff1,fffe,ffff
Driver module is "option", ID path is /sys/bus/usb-serial/drivers/option1
Command to be run:
usb_modeswitch -I -W -D -s 20 -u -1 -b 1 -g 2 -v 19d2 -p fff5 -f $cB
Verbose debug output of usb_modeswitch and libusb follows
(Note that some USB errors are to be expected in the process)
--------------------------------
Reading long config from command line
* usb_modeswitch: handle USB devices with multiple modes
* Version 1.2.7 (C) Josua Dietze 2012
* Based on libusb0 (0.1.12 and above)
! PLEASE REPORT NEW CONFIGURATIONS !
DefaultVendor= 0x19d2
DefaultProduct= 0xfff5
TargetVendor= 0x19d2
TargetProduct= not set
TargetClass= not set
TargetProductList="fff1,fffe,ffff"
DetachStorageOnly=0
HuaweiMode=0
SierraMode=0
SonyMode=0
QisdaMode=0
QuantaMode=0
GCTMode=0
KobilMode=0
SequansMode=0
MobileActionMode=0
CiscoMode=0
BlackberryMode=0
PantechMode=0
MessageEndpoint= not set
MessageContent="5553424312345678c00000008000069f030000000000000000000000000000"
NeedResponse=0
ResponseEndpoint= not set
InquireDevice disabled
Success check enabled, max. wait time 20 seconds
System integration mode enabled
Use given bus/device number: 001/002 ...
Looking for default devices ...
bus/device number matched
searching devices, found USB ID 19d2:fff5
found matching vendor ID
found matching product ID
adding device
Found device in default mode, class or configuration (1)
Skipping the check for the current configuration
Using interface number 0
Using endpoints 0x0a (out) and 0x89 (in)
USB description data (for identification)
-------------------------
Manufacturer: ZTE, Incorporated
Product: USB Storage
Serial No.: 000000000002
-------------------------
Looking for active driver ...
OK, driver found; name unknown, limitation of libusb1
OK, driver "unkown" detached
Setting up communication with interface 0
Using endpoint 0x0a for message sending ...
Trying to send message 1 to endpoint 0x0a ...
Sending the message returned error -6. Trying to continue
Resetting response endpoint 0x89
Could not reset endpoint (probably harmless): -6
Resetting message endpoint 0x0a
Could not reset endpoint (probably harmless): -6
Device is gone, skipping any further commands
Bus/dev search active, referring success check to wrapper. Bye.
ok:busdev
--------------------------------
(end of usb_modeswitch output)
Checking success of mode switch for max. 20 seconds ...
Waiting for device file system (1 sec.) ...
Reading attributes ...
Mode switch has completed
Mode switching was successful, found 19d2:fff1 (ZTE, Incorporated: ZTE CDMA Tech)
Device class of first interface is ff
Now checking for bound driver ...
No driver has bound to interface 0 yet
Module loader is /system/bin/insmod
Trying to find and install main driver module "option"
Checking for active driver path: /sys/bus/usb-serial/drivers/option1
Driver not active, try to find module "option"
Can't find module "option"
Existing path found:
No way to use driver "option"
- try falling back to "usbserial"
Module "usb_serial" not found, can't do more here
Driver binding did not work for this device
All done, exiting
QUOTE=taqulic;34223799]Here.
http://www.filesend.net/download.php?f=4c6891af31cb635623fac53e094def52[/QUOTE]
Sir,
Using samsung note i717with official jb rom 4.1.2, ppp app says driver not found, device log is as above. Request you to help in this regard.
Hi,
I need help plz, I want to upgrade my asus tablet pad memo 7 "x ME173,
but every time I try I get this error output:
assert faild: apply_patch_check ("/ system / app / MyBitCast.apk" "7e89b40472e4fe3d1459fb19f02b2901f281cea9"..
"01c881b5cd2aad035329684eddd0471644914bb2")
update.zipis not correct.
???
Wrong Thread Buddy.
Hi guys...
I'm new here ,
I just knew that I can freely register my phone as a developer ... ( so I can download homebrew apps and Sideload )
So I installed WindowsPhone8SDK & ZUNE software...
When i choose the account to register with in the Windows Phone Registration tool I get an ERROR
ErrorCode : 0x64
What is the problem ?
Please help me