I'm currently running Sons of Android Build 4 on my T989, and everything works great except for Bluetooth audio info sent to my car stereo. The music plays and controls work, but no song data is sent, which I believe I've read that is part of 4.2.2. Every other ROM i've tried, I lose all cell signal. This is my second T989, and I have never had this problem before. I've even tried flashing the radio again, but nothing works. Once I go back to SOA, I get fine service. Any ideas? Do I need to flash with Odin back to stock, and start all over again?
Hail2theskins said:
Once I go back to SOA, I get fine service. Any ideas? Do I need to flash with Odin back to stock, and start all over again?
Click to expand...
Click to collapse
Did you flash either the UVMC6 or TLMC4 radio?
They are the only two that work with newer 4.2.2 ROMs.
http://forum.xda-developers.com/showthread.php?t=1895400
Related
Hello,
i am back again with a new problem!
All the previous problems that was mentioned in this forum is GONE. i was a happy owner. Until i got this problem.
so i wanted to try new Modem, just so i can increase my Signal, and right now, my data plan is keep going on and off, and most the time i can't get it connected it.
i did the wipe date /factory reset from the ROM manager, and wipe cache and dalvik. and yet the problem is not solved.
right now, am running cm-10.1-20130304-EXPERIMENTAL
and the Modem am currently running which sometimes works ( I747MVLDLK4 ) am with Rogers, Canada, Edmonton, AB
If anyone helped me out with this, your next coffee is on me! for real!
anyone?
When I have Wifi or Signal/Data issues, I just Odin back to stock and then re-root & flash ROM again. Works every time.
CZ Eddie said:
When I have Wifi or Signal/Data issues, I just Odin back to stock and then re-root & flash ROM again. Works every time.
Click to expand...
Click to collapse
Thanks man, i really hope it works! , am gonna try this now.. When i restore to the stock, dose my based band goes to default or shall i manually do that?
just restore to the stock Rom. i still have no data connection, and now i can't even call or send a text....
MH_91 said:
just restore to the stock Rom. i still have no data connection, and now i can't even call or send a text....
Click to expand...
Click to collapse
Did you use ODIN to flash the stock ROM and factory reset in stock recovery ?
hednik said:
Did you use ODIN to flash the stock ROM and factory reset in stock recovery ?
Click to expand...
Click to collapse
Yes! i think i did a mistake. While i restored to the stock rom, The baseband that i was using it was I747MVLDLK4 and not the STOCK modem. So maybe that is why its not getting connected? am trying to apply the stock modem into the the stock rom, but its giving me Fail error.
am just scratching my head right now to be quite honest and this close to throw my cellphone outside of the balcony.
MH_91 said:
Yes! i think i did a mistake. While i restored to the stock rom, The baseband that i was using it was I747MVLDLK4 and not the STOCK modem. So maybe that is why its not getting connected? am trying to apply the stock modem into the the stock rom, but its giving me Fail error.
am just scratching my head right now to be quite honest and this close to throw my cellphone outside of the balcony.
Click to expand...
Click to collapse
What type of fail error?
How are you trying to flash it?
i managed to make my modem into the stock version. However am just getting "E" in my data connection. Reminder am still in STOCK ROM and stock modem now. is that a good sign that i slighty getting everything back??
should i just install the CM 10.1 now and see the results or what you guys recommend?
annnnnnnnnd my " E" is gone.. Beautiful
do you guys think it might be a actual physical sim card issue?
UPDATE: i restored my phone into the stock rom by Odin3 and now i just re flashed the Cm 10.1 again. sadly i still have no connection and my income and outcome for calling and texts is also not working.
please help!
Try flashing Task's AOKP and see if you have the same issue. Additionally, try deleting the current APNs (access point names) and manually enter the APN settings for your carrier. Could also just be a faulty SIM card as you mentioned.
Sent from my SGH-I747 using xda app-developers app
MH_91 said:
UPDATE: i restored my phone into the stock rom by Odin3 and now i just re flashed the Cm 10.1 again. sadly i still have no connection and my income and outcome for calling and texts is also not working.
please help!
Click to expand...
Click to collapse
You have your imei still ? I don't see that mentioned.... this sounds like that issue. flashing between TW and Custom it can happen
Thanks guys for the feedback, but i have managed to fix the problem, this post was before i know that i lost my IMEI...
All good now, everything has be resolved.
cheers,
I can not get any radio to work to make or receive calls! I flashed everyone out there and still can not make or receive calls. What method can I use do to get it to work? I flashed radio from TWRP with Factory reset, delvik and cache and then flash with no wipe and I just cant get that or any radio to work. I just get AT&T when I do a scan, which I use T-Mobile. When I choose search in settings in mobile networks, still nothing. When I try to use phone, it always says no network avail. and yes I have data box checked off. It just seams lately any Rom I flash after the newest stock, (JB) I have radio issues, can not make or receive calls. I even erased, wiped everything and started from scratch with stock. Phones works fine, but when I try any ROM, no calls, no matter what radio I flash. I must be doing something wrong. I must say, that I flashed many a Roms before and all worked well until now! I even download same radios in case I got a bad download. I can use kernels, such as Tiberius with Stock JB. I Flash a Rom and no radio, no matter what Rom. My version in stock is UVMC6, SGH T-989 phone. (T-Mobile). I know all phones are different and thought maybe something in stock files I might be able to use, but don't know which files. I am not a dev by any means and thought if I could use the stock I have now can work with the any Rom here. I never dirty flash anything, all Roms work that I flash from sd card, just not able to use phone in any Rom at all! I thought maybe I can manually put in APN, but I have no idea were to get address to enter. I am from Delaware if that matters as far as APN. Can anyone give any suggestions of what they did to get radio to work?
Sargeue said:
I can not get any radio to work to make or receive calls! I flashed everyone out there and still can not make or receive calls. What method can I use do to get it to work? I flashed radio from TWRP with Factory reset, delvik and cache and then flash with no wipe and I just cant get that or any radio to work. I just get AT&T when I do a scan, which I use T-Mobile. When I choose search in settings in mobile networks, still nothing. When I try to use phone, it always says no network avail. and yes I have data box checked off. It just seams lately any Rom I flash after the newest stock, (JB) I have radio issues, can not make or receive calls. I even erased, wiped everything and started from scratch with stock. Phones works fine, but when I try any ROM, no calls, no matter what radio I flash. I must be doing something wrong. I must say, that I flashed many a Roms before and all worked well until now! I even download same radios in case I got a bad download. I can use kernels, such as Tiberius with Stock JB. I Flash a Rom and no radio, no matter what Rom. My version in stock is UVMC6, SGH T-989 phone. (T-Mobile). I know all phones are different and thought maybe something in stock files I might be able to use, but don't know which files. I am not a dev by any means and thought if I could use the stock I have now can work with the any Rom here. I never dirty flash anything, all Roms work that I flash from sd card, just not able to use phone in any Rom at all! I thought maybe I can manually put in APN, but I have no idea were to get address to enter. I am from Delaware if that matters as far as APN. Can anyone give any suggestions of what they did to get radio to work?
Click to expand...
Click to collapse
Verify your APN settings are correct. If there isn't a t mobile APN set up than try creating one. Also go to Settings > About Phone > Status and make sure your phone has a valid IMEI number (anything other than 0)
Sent from my SGH-I747 using xda app-developers app
KorGuy123 said:
Verify your APN settings are correct. If there isn't a t mobile APN set up than try creating one. Also go to Settings > About Phone > Status and make sure your phone has a valid IMEI number (anything other than 0)
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Thanks, yeah after all reading and troubleshooting it seems APN is where I have to create and/or edit! I found APN settings on Google and wrote down the settings that is on stock Rom where phone is working and will try it. Thanks for heading me in the right direction.
Sargeue said:
Thanks, yeah after all reading and troubleshooting it seems APN is where I have to create and/or edit! I found APN settings on Google and wrote down the settings that is on stock Rom where phone is working and will try it. Thanks for heading me in the right direction.
Click to expand...
Click to collapse
Glad to help.
Sent from my SGH-I747 using xda app-developers app
I'm in Canada and had same problem with SlimBean ROM (which is my favourite ROM). I flashed phone back to a stock ROM, flashed DARKSIDE.SUPER.WIPE, the ROM, and Gapps with TWRP recovery (in that order) and was back in business.
T989D
TWRP 2.4
SlimBean ROM 3.4
Deacon75 said:
I'm in Canada and had same problem with SlimBean ROM (which is my favourite ROM). I flashed phone back to a stock ROM, flashed DARKSIDE.SUPER.WIPE, the ROM, and Gapps with TWRP recovery (in that order) and was back in business.
T989D
TWRP 2.4
SlimBean ROM 3.4
Click to expand...
Click to collapse
Still no radio, will try your way, thanks!
I've had this Samsung S3 for almost a year now, and in the pass week, my radio has been acting funny, It dropped the IMEI, and pretty must lost all connections with my 3G network, So I ended up wipe the phone and setting it back to the default S3 ROM, after being on cyanogen mod ROM for a few months. After a bit of fiddling, I ended up finally getting my IMEI number back, and it worked fine.... till I connected to Wifi. After I connect to the Wifi, my radio stops working period. Any ideas on what could be wrong?
I'm running a Samsung SGH-1747M, which is an AT&T version, although my carrier is rogers in Canada.
Mat244885 said:
I've had this Samsung S3 for almost a year now, and in the pass week, my radio has been acting funny, It dropped the IMEI, and pretty must lost all connections with my 3G network, So I ended up wipe the phone and setting it back to the default S3 ROM, after being on cyanogen mod ROM for a few months. After a bit of fiddling, I ended up finally getting my IMEI number back, and it worked fine.... till I connected to Wifi. After I connect to the Wifi, my radio stops working period. Any ideas on what could be wrong?
I'm running a Samsung SGH-1747M, which is an AT&T version, although my carrier is rogers in Canada.
Click to expand...
Click to collapse
try reflashing your modem, also what rom are you on atm?
Danvdh said:
try reflashing your modem, also what rom are you on atm?
Click to expand...
Click to collapse
Like on my phone? how would i do that and Stock andoird right now was on cyanogenmod but was having problems for some reason...
Mat244885 said:
Like on my phone? how would i do that and Stock andoird right now was on cyanogenmod but was having problems for some reason...
Click to expand...
Click to collapse
did you get back to stock touchwiz android using odin or using recovery mode?
Danvdh said:
did you get back to stock touchwiz android using odin or using recovery mode?
Click to expand...
Click to collapse
Odin
If you flashed a full stock package, it flashed the modem too
mrhaley30705 said:
If you flashed a full stock package, it flashed the modem too
Click to expand...
Click to collapse
Yeah kinda figured that... i had cyanogenmod on my phone since i got it then i started having all these radio issues thought it was rogers but i guess not... then i some how lost my IMEI got it back and still having radio problems just worst now... Ahhh i miss my simple Windows Phone 7 now hahaha
At first I thought it was the ROM, but I flashed 4 different roms and still the same problem. Every time someone calls me it drops my signal, all my bars go away and whoever called me cannot hear me. Idk how to fix this :/
Robdizz said:
At first I thought it was the ROM, but I flashed 4 different roms and still the same problem. Every time someone calls me it drops my signal, all my bars go away and whoever called me cannot hear me. Idk how to fix this :/
Click to expand...
Click to collapse
4.4 seems to require at least the 4.3 modem baseband, you need to flash it via Odin. Be careful on the version, note the one already installed and chek which one is the normal upgrade. My m919v only worked with it's specific modem.
There's a few topic about this. Can't post link but look for this one: [ONLY FOR MDL BOOTLOADER] How to use 4.3 MK2 Modem and Retain Sound
Okay so I just returned to stock because I couldn't fix the problem .. so now i'm running android 4.2 and my wifi wont connect. Keeps giving me this when I try to turn on Wifi
I was using CarbonROM based on JB 4.3.1 but was getting fed up with not being able to connect with families oversea through VOIP such as skype, viber, etc... because the mic doesn't work with voip apps in AOSP Roms. So I decided to go back to stock and full flash samsung's 4.3 stock rom via Odin 3.9; the rom was 2.24GB extracted so I'm almost certain and well aware that it's the bloated tmo samsung tw version.
About device show android version 4.3, baseband M919UVUEMK2, and I can get LTE signal fine but cannot toggle wifi on. And when I go to place a phone call the entire UI freeze and won't respond, then come the "Process com.android.phone isn't responding" dialog box. Except for wifi and phone call everything else seems to work, but I haven't tested extensively yet nor are they important to me.
From here I went about installing latest CWM recovery and SU, and I was able to install OmniROM and CM11 nightlies. But the phone UI freezing problem still persist even with those custom roms.
At this point I have an inkling it has something to do with the new MK2 modem. I noticed that when installing the stock fw it had modem.bin and NON-HLOS.bin entries in Odin. I read through other threads and some mention about not installing NON-HLOS.bin file, but it was included in the stock fw so I don't know why it would misbehave (if it's the culprit)
At this point I am out of options. Someone with knowledge and experience with this please give helps or suggestions. Thank you!
If you flashed via Odin, you had no choice with the non _hlos.bin. That's only for peoples sticking with mdl bootloader but flash 4.3 ROM.
Have you tried a factory reset after updating to 4.3
☞ Sent from here☜
I did a factory reset in TW and it still freeze. I can open the dialer app, punch in a number or choose from contact list, but as soon as I hit Dial the whole phone freeze. The connection is made because I test dialed my home phone # and it rang, just that I could not get the phone to talk. No dial sound from the phone, screen it black; I can see status bar but it won't respond to my touch. When I pick up the home phone and tried to make a conversation there's no sound coming out of the S4, and even if I yell real loud into the mic no voice is carried over to the home phone.
I tried installing latest Omni rom 4.4.2 kitkat nightly, did a factory reset after letting phone sit still at home screen for 5 mins after installation, still can't get the phone app to do its job at all.
Edit: forgot to mention that the phone is unlocked and I'm using Straight Talk AT&T LTE sim. LTE works fine, just no calling due to this update problem here.
nvm I fixed it by reflashing a file Modem_UVUAMDL.tar.md5 until it turns back to MDL baseband, then flashed modem.bin only and it everything works again.
kawaiichi said:
nvm I fixed it by reflashing a file Modem_UVUAMDL.tar.md5 until it turns back to MDL baseband, then flashed modem.bin only and it everything works again.
Click to expand...
Click to collapse
i'm having the same issue, I was to download the modem_UVUAMDL.tar.md5 but it did not include the modem.bin. is it safe to use any version of the modem.bin file I find here?